• White Nelud
  • White Nelud
  • Пользователь
  • Неактивен
  • Зарегистрирован: 04.01.2011
  • Сообщений: 460
  • Репутация : [ 11 | 2 ]

После сборки mplayer'a на клавиатуре поменялись местами клавиши (образно), то есть, нажимая на клавишу Delete делается скриншот, стрелка вниз служит Enter'om и еще пару клавиш странно себя ведут.

Гугли на эту тему, но ничего не помогло.

2 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

Это только в MPlayer'е так? Если да, попробуйте удалить (переместить) каталог ~/.mplayer, если нет, покажите файл /etc/conf.d/keymaps
P.S. etc-update ничего обновить не предлагает?

Был, был и весь вышел...

3 Ответ от White Nelud (31.01.2011 23:52:31 отредактировано White Nelud)

  • White Nelud
  • White Nelud
  • Пользователь
  • Неактивен
  • Зарегистрирован: 04.01.2011
  • Сообщений: 460
  • Репутация : [ 11 | 2 ]

Lupo Alberto, да, просит:

 Консоль:

Scanning Configuration files...
The following is the list of files which need updating, each
configuration file is followed by a list of possible replacement files.
1) /etc/init.d/cupsd (1)
2) /etc/pam.d/system-login (1)
Please select a file to edit by entering the corresponding number.
              (don't use -3, -5, -7 or -9 if you're unsure what to do)
              (-1 to exit) (-3 to auto merge all remaining files)
                           (-5 to auto-merge AND not use 'mv -i')
                           (-7 to discard all updates)
                           (-9 to discard all updates AND not use 'rm -i'):

/etc/conf.d/keymaps

# /etc/conf.d/keymaps

# Use KEYMAP to specify the default console keymap.  There is a complete tree
# of keymaps in /usr/share/keymaps to choose from.

KEYMAP="us"


# Should we first load the 'windowkeys' console keymap?  Most x86 users will
# say "yes" here.  Note that non-x86 users should leave it as "no".

SET_WINDOWKEYS="no"


# The maps to load for extended keyboards.  Most users will leave this as is.

EXTENDED_KEYMAPS=""
#EXTENDED_KEYMAPS="backspace keypad euro"


# Tell dumpkeys(1) to interpret character action codes to be
# from the specified character set.
# This only matters if you set UNICODE="yes" in /etc/rc.conf.
# For a list of valid sets, run `dumpkeys --help`

DUMPKEYS_CHARSET=""

P.S. Обновил то что сказал etc-update

4 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

По первому пункту, в данном случае к вашей проблеме отношения не имеет. Но обновлять системные файлы надо. Сейчас можете просто нажать «-5».
По второму пункту, попробуйте чуть исправить.

KEYMAP="ru"
SET_WINDOWKEYS="yes"

Покажите вывод команды

locale
Был, был и весь вышел...

5 Ответ от White Nelud

  • White Nelud
  • White Nelud
  • Пользователь
  • Неактивен
  • Зарегистрирован: 04.01.2011
  • Сообщений: 460
  • Репутация : [ 11 | 2 ]

Все сделал как сказали, вот вывод команды:

LANG=ru_RU.UTF-8
LC_CTYPE="ru_RU.UTF-8"
LC_NUMERIC="ru_RU.UTF-8"
LC_TIME="ru_RU.UTF-8"
LC_COLLATE="ru_RU.UTF-8"
LC_MONETARY="ru_RU.UTF-8"
LC_MESSAGES="ru_RU.UTF-8"
LC_PAPER="ru_RU.UTF-8"
LC_NAME="ru_RU.UTF-8"
LC_ADDRESS="ru_RU.UTF-8"
LC_TELEPHONE="ru_RU.UTF-8"
LC_MEASUREMENT="ru_RU.UTF-8"
LC_IDENTIFICATION="ru_RU.UTF-8"
LC_ALL=

6 Ответ от Lupo Alberto (01.02.2011 00:03:15 отредактировано Lupo Alberto)

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

Сделайте

/etc/init.d/keymaps restart

P.S. Так во всех приложениях клавиши поменялись?

Был, был и весь вышел...

7 Ответ от White Nelud

  • White Nelud
  • White Nelud
  • Пользователь
  • Неактивен
  • Зарегистрирован: 04.01.2011
  • Сообщений: 460
  • Репутация : [ 11 | 2 ]

Сделал, символы в терминале сами начала печататься, потом слетели Иксы. В терминале все в порядке, вс еклавиши работают, но когда снова включаю иксы то опять клавиши не на своих местах. Пробовал даже locale-gen  - не помогло. Может пробелма в Иксах?

8 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]
koala пишет:

Может пробелма в Иксах?

Для чистоты эксперимента  wink , перегрузитесь. Затем покажите /etc/X11/xorg.conf и /var/log/Xorg.0.log

Был, был и весь вышел...

9 Ответ от White Nelud

  • White Nelud
  • White Nelud
  • Пользователь
  • Неактивен
  • Зарегистрирован: 04.01.2011
  • Сообщений: 460
  • Репутация : [ 11 | 2 ]

Lupo Alberto, я перед этим пару раз уже перезагружался. Попробовал удалить файл xorg.conf и сгенерировать новый с основными правками. Клавиатура почти правильно заработала. Теперь клавиша Delete правильно работает но вот стрел вниз все ровно работает Enter'om =(

/etc/X11/xorg.conf

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
#    InputDevice    "Mouse0" "CorePointer"
#    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc/"
    FontPath     "/usr/share/fonts/TTF/"
    FontPath     "/usr/share/fonts/OTF/"
    FontPath     "/usr/share/fonts/Type1/"
    FontPath     "/usr/share/fonts/100dpi/"
    FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
    Load  "extmod"
    Load  "record"
    Load  "dbe"
    Load  "glx"
EndSection

#Section "InputDevice"
#    Identifier  "Keyboard0"
#    Driver      "kbd"
#EndSection

#Section "InputDevice"
#    Identifier  "Mouse0"
#    Driver      "mouse"
#    Option        "Protocol" "auto"
#    Option        "Device" "/dev/input/mice"
#    Option        "ZAxisMapping" "4 5 6 7"
#EndSection

Section "ServerFlags"
        Option "AllowEmpty Input" "False"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
    Identifier  "nVidia Inc. GeForce2"
    Driver      "nvidia"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

/var/log/Xorg.0.log

[  1819.612]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[  1819.612] X Protocol Version 11, Revision 0
[  1819.612] Build Operating System: Linux 2.6.35-22-generic i686 Gentoo
[  1819.612] Current Operating System: Linux Asus 2.6.36-gentoo-r5 #1 SMP Sat Jan 29 14:07:47 EET 2011 i686
[  1819.612] Kernel command line: root=/dev/ram0 real_root=/dev/sda4 vga=0x318
[  1819.612] Build Date: 30 January 2011  12:23:28AM
[  1819.612] 
[  1819.612] Current version of pixman: 0.20.0
[  1819.612]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  1819.612] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1819.612] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 21:17:49 2011
[  1819.612] (==) Using config file: "/etc/X11/xorg.conf"
[  1819.612] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1819.613] (==) ServerLayout "X.org Configured"
[  1819.613] (**) |-->Screen "Screen0" (0)
[  1819.613] (**) |   |-->Monitor "Monitor0"
[  1819.613] (==) No device specified for screen "Screen0".
    Using the first device section listed.
[  1819.613] (**) |   |-->Device "nVidia Inc. GeForce2"
[  1819.613] (**) Option "AllowEmptyInput" "False"
[  1819.613] (==) Automatically adding devices
[  1819.613] (==) Automatically enabling devices
[  1819.613] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[  1819.613] (**) ModulePath set to "/usr/lib/xorg/modules"
[  1819.613] (==) |-->Input Device "<default pointer>"
[  1819.613] (==) |-->Input Device "<default keyboard>"
[  1819.613] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
[  1819.613] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
[  1819.613] (II) Loader magic: 0x81f3de0
[  1819.613] (II) Module ABI versions:
[  1819.613]     X.Org ANSI C Emulation: 0.4
[  1819.613]     X.Org Video Driver: 8.0
[  1819.613]     X.Org XInput driver : 11.0
[  1819.613]     X.Org Server Extension : 4.0
[  1819.614] (--) PCI:*(0:1:0:0) 10de:0618:1043:202b rev 162, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[  1819.614] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[  1819.614] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[  1819.614] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  1819.614] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[  1819.614] (II) "dri" will be loaded by default.
[  1819.614] (II) "dri2" will be loaded by default.
[  1819.614] (II) LoadModule: "extmod"
[  1819.615] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  1819.615] (II) Module extmod: vendor="X.Org Foundation"
[  1819.615]     compiled for 1.9.2, module version = 1.0.0
[  1819.615]     Module class: X.Org Server Extension
[  1819.615]     ABI class: X.Org Server Extension, version 4.0
[  1819.615] (II) Loading extension MIT-SCREEN-SAVER
[  1819.615] (II) Loading extension XFree86-VidModeExtension
[  1819.615] (II) Loading extension XFree86-DGA
[  1819.615] (II) Loading extension DPMS
[  1819.615] (II) Loading extension XVideo
[  1819.615] (II) Loading extension XVideo-MotionCompensation
[  1819.615] (II) Loading extension X-Resource
[  1819.615] (II) LoadModule: "record"
[  1819.615] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  1819.615] (II) Module record: vendor="X.Org Foundation"
[  1819.615]     compiled for 1.9.2, module version = 1.13.0
[  1819.615]     Module class: X.Org Server Extension
[  1819.615]     ABI class: X.Org Server Extension, version 4.0
[  1819.615] (II) Loading extension RECORD
[  1819.615] (II) LoadModule: "dbe"
[  1819.615] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  1819.615] (II) Module dbe: vendor="X.Org Foundation"
[  1819.615]     compiled for 1.9.2, module version = 1.0.0
[  1819.615]     Module class: X.Org Server Extension
[  1819.615]     ABI class: X.Org Server Extension, version 4.0
[  1819.615] (II) Loading extension DOUBLE-BUFFER
[  1819.615] (II) LoadModule: "glx"
[  1819.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1819.640] (II) Module glx: vendor="NVIDIA Corporation"
[  1819.640]     compiled for 4.0.2, module version = 1.0.0
[  1819.640]     Module class: X.Org Server Extension
[  1819.640] (II) NVIDIA GLX Module  260.19.29  Wed Dec  8 12:25:40 PST 2010
[  1819.640] (II) Loading extension GLX
[  1819.640] (II) LoadModule: "dri"
[  1819.640] (WW) Warning, couldn't open module dri
[  1819.640] (II) UnloadModule: "dri"
[  1819.640] (EE) Failed to load module "dri" (module does not exist, 0)
[  1819.640] (II) LoadModule: "dri2"
[  1819.641] (WW) Warning, couldn't open module dri2
[  1819.641] (II) UnloadModule: "dri2"
[  1819.641] (EE) Failed to load module "dri2" (module does not exist, 0)
[  1819.641] (II) LoadModule: "nvidia"
[  1819.641] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1819.641] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1819.641]     compiled for 4.0.2, module version = 1.0.0
[  1819.641]     Module class: X.Org Video Driver
[  1819.641] (II) LoadModule: "mouse"
[  1819.641] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[  1819.641] (II) Module mouse: vendor="X.Org Foundation"
[  1819.641]     compiled for 1.9.2, module version = 1.6.0
[  1819.641]     Module class: X.Org XInput Driver
[  1819.641]     ABI class: X.Org XInput driver, version 11.0
[  1819.642] (II) LoadModule: "kbd"
[  1819.642] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[  1819.642] (II) Module kbd: vendor="X.Org Foundation"
[  1819.642]     compiled for 1.9.2, module version = 1.5.0
[  1819.642]     Module class: X.Org XInput Driver
[  1819.642]     ABI class: X.Org XInput driver, version 11.0
[  1819.642] (II) NVIDIA dlloader X Driver  260.19.29  Wed Dec  8 12:10:28 PST 2010
[  1819.642] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1819.642] (++) using VT number 8

[  1819.674] (II) Loading sub module "fb"
[  1819.674] (II) LoadModule: "fb"
[  1819.674] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1819.674] (II) Module fb: vendor="X.Org Foundation"
[  1819.674]     compiled for 1.9.2, module version = 1.0.0
[  1819.674]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1819.674] (II) Loading sub module "wfb"
[  1819.674] (II) LoadModule: "wfb"
[  1819.674] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1819.674] (II) Module wfb: vendor="X.Org Foundation"
[  1819.675]     compiled for 1.9.2, module version = 1.0.0
[  1819.675]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1819.675] (II) Loading sub module "ramdac"
[  1819.675] (II) LoadModule: "ramdac"
[  1819.675] (II) Module "ramdac" already built-in
[  1819.675] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1819.675] (==) NVIDIA(0): RGB weight 888
[  1819.675] (==) NVIDIA(0): Default visual is TrueColor
[  1819.675] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1819.675] (**) NVIDIA(0): Enabling RENDER acceleration
[  1819.675] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[  1819.675] (II) NVIDIA(0):     enabled.
[  1820.238] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260M (G92) at PCI:1:0:0 (GPU-0)
[  1820.238] (--) NVIDIA(0): Memory: 1048576 kBytes
[  1820.238] (--) NVIDIA(0): VideoBIOS: 62.92.83.00.0a
[  1820.238] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  1820.238] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[  1820.238] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260M at PCI:1:0:0
[  1820.238] (--) NVIDIA(0):     LGD (DFP-0)
[  1820.238] (--) NVIDIA(0): LGD (DFP-0): 330.0 MHz maximum pixel clock
[  1820.238] (--) NVIDIA(0): LGD (DFP-0): Internal Dual Link LVDS
[  1820.274] (II) NVIDIA(0): Assigned Display Device: DFP-0
[  1820.274] (==) NVIDIA(0):
[  1820.274] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  1820.274] (==) NVIDIA(0):     will be used as the requested mode.
[  1820.274] (==) NVIDIA(0):
[  1820.274] (II) NVIDIA(0): Validated modes:
[  1820.274] (II) NVIDIA(0):     "nvidia-auto-select"
[  1820.274] (II) NVIDIA(0): Virtual screen size determined to be 1600 x 900
[  1821.334] (--) NVIDIA(0): DPI set to (106, 108); computed from "UseEdidDpi" X config
[  1821.334] (--) NVIDIA(0):     option
[  1821.334] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[  1821.334] (--) Depth 24 pixmap format is 32 bpp
[  1821.335] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[  1821.336] (II) NVIDIA(0): Initialized GPU GART.
[  1821.341] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1821.341] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1821.341] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1821.341] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1821.341] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1821.341] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1821.341] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1821.341] (II) NVIDIA(0):     Config Options in the README.
[  1821.341] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[  1821.341] (II) NVIDIA(0):     enough to receive ACPI hotkey events.
[  1821.341] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
[  1821.345] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[  1821.673] (II) Loading extension NV-GLX
[  1821.703] (II) NVIDIA(0): Initialized OpenGL Acceleration
[  1821.726] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1821.726] (II) NVIDIA(0): Initialized X Rendering Acceleration
[  1821.726] (==) NVIDIA(0): Backing store disabled
[  1821.726] (==) NVIDIA(0): Silken mouse enabled
[  1821.733] (==) NVIDIA(0): DPMS enabled
[  1821.733] (II) Loading extension NV-CONTROL
[  1821.733] (II) Loading extension XINERAMA
[  1821.733] (II) Loading sub module "dri2"
[  1821.733] (II) LoadModule: "dri2"
[  1821.734] (WW) Warning, couldn't open module dri2
[  1821.734] (II) UnloadModule: "dri2"
[  1821.734] (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
[  1821.734] (II) NVIDIA(0): The X server will not be able to send the VDPAU driver name to
[  1821.734] (II) NVIDIA(0):     libvdpau.
[  1821.734] (==) RandR enabled
[  1821.734] (II) Initializing built-in extension Generic Event Extension
[  1821.734] (II) Initializing built-in extension SHAPE
[  1821.734] (II) Initializing built-in extension MIT-SHM
[  1821.734] (II) Initializing built-in extension XInputExtension
[  1821.734] (II) Initializing built-in extension XTEST
[  1821.734] (II) Initializing built-in extension BIG-REQUESTS
[  1821.734] (II) Initializing built-in extension SYNC
[  1821.734] (II) Initializing built-in extension XKEYBOARD
[  1821.734] (II) Initializing built-in extension XC-MISC
[  1821.734] (II) Initializing built-in extension XINERAMA
[  1821.734] (II) Initializing built-in extension XFIXES
[  1821.734] (II) Initializing built-in extension RENDER
[  1821.734] (II) Initializing built-in extension RANDR
[  1821.734] (II) Initializing built-in extension COMPOSITE
[  1821.734] (II) Initializing built-in extension DAMAGE
[  1821.737] (II) Initializing extension GLX
[  1821.926] (WW) <default pointer>: No Device specified, looking for one...
[  1822.070] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[  1822.070] (--) <default pointer>: Device: "/dev/input/mice"
[  1822.070] (==) <default pointer>: Protocol: "Auto"
[  1822.070] (**) Option "CorePointer"
[  1822.070] (**) <default pointer>: always reports core events
[  1822.210] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[  1822.210] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[  1822.210] (**) <default pointer>: Buttons: 9
[  1822.210] (**) <default pointer>: Sensitivity: 1
[  1822.210] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
[  1822.210] (**) <default pointer>: (accel) keeping acceleration scheme 1
[  1822.210] (**) <default pointer>: (accel) acceleration profile 0
[  1822.210] (**) <default pointer>: (accel) acceleration factor: 2.000
[  1822.210] (**) <default pointer>: (accel) acceleration threshold: 4
[  1822.250] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[  1822.541] (II) <default pointer>: ps2EnableDataReporting: succeeded
[  1822.541] (**) Option "CoreKeyboard"
[  1822.541] (**) <default keyboard>: always reports core events
[  1822.541] (**) Option "Protocol" "standard"
[  1822.541] (**) <default keyboard>: Protocol: standard
[  1822.541] (**) Option "XkbRules" "base"
[  1822.541] (**) <default keyboard>: XkbRules: "base"
[  1822.541] (**) Option "XkbModel" "pc105"
[  1822.541] (**) <default keyboard>: XkbModel: "pc105"
[  1822.541] (**) Option "XkbLayout" "us"
[  1822.541] (**) <default keyboard>: XkbLayout: "us"
[  1822.541] (**) Option "CustomKeycodes" "off"
[  1822.541] (**) <default keyboard>: CustomKeycodes disabled
[  1822.541] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
[  1822.552] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[  1822.552] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1822.552] (II) LoadModule: "evdev"
[  1822.552] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1822.552] (II) Module evdev: vendor="X.Org Foundation"
[  1822.552]     compiled for 1.9.2, module version = 2.5.0
[  1822.552]     Module class: X.Org XInput Driver
[  1822.552]     ABI class: X.Org XInput driver, version 11.0
[  1822.552] (**) Power Button: always reports core events
[  1822.552] (**) Power Button: Device: "/dev/input/event8"
[  1822.590] (--) Power Button: Found keys
[  1822.590] (II) Power Button: Configuring as keyboard
[  1822.590] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  1822.590] (**) Option "xkb_rules" "evdev"
[  1822.590] (**) Option "xkb_model" "evdev"
[  1822.590] (**) Option "xkb_layout" "us"
[  1823.146] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[  1823.146] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1823.146] (**) Video Bus: always reports core events
[  1823.146] (**) Video Bus: Device: "/dev/input/event10"
[  1823.190] (--) Video Bus: Found keys
[  1823.190] (II) Video Bus: Configuring as keyboard
[  1823.190] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[  1823.190] (**) Option "xkb_rules" "evdev"
[  1823.190] (**) Option "xkb_model" "evdev"
[  1823.190] (**) Option "xkb_layout" "us"
[  1823.193] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[  1823.193] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1823.193] (**) Power Button: always reports core events
[  1823.193] (**) Power Button: Device: "/dev/input/event7"
[  1823.250] (--) Power Button: Found keys
[  1823.250] (II) Power Button: Configuring as keyboard
[  1823.250] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  1823.250] (**) Option "xkb_rules" "evdev"
[  1823.250] (**) Option "xkb_model" "evdev"
[  1823.250] (**) Option "xkb_layout" "us"
[  1823.250] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[  1823.250] (II) No input driver/identifier specified (ignoring)
[  1823.250] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[  1823.250] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1823.250] (**) Sleep Button: always reports core events
[  1823.250] (**) Sleep Button: Device: "/dev/input/event6"
[  1823.310] (--) Sleep Button: Found keys
[  1823.310] (II) Sleep Button: Configuring as keyboard
[  1823.310] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[  1823.310] (**) Option "xkb_rules" "evdev"
[  1823.310] (**) Option "xkb_model" "evdev"
[  1823.310] (**) Option "xkb_layout" "us"
[  1823.314] (II) config/udev: Adding input device Asus gaming Mouse (G112) (/dev/input/event2)
[  1823.314] (**) Asus gaming Mouse (G112): Applying InputClass "evdev pointer catchall"
[  1823.314] (**) Asus gaming Mouse (G112): always reports core events
[  1823.314] (**) Asus gaming Mouse (G112): Device: "/dev/input/event2"
[  1823.350] (--) Asus gaming Mouse (G112): Found 9 mouse buttons
[  1823.350] (--) Asus gaming Mouse (G112): Found scroll wheel(s)
[  1823.350] (--) Asus gaming Mouse (G112): Found relative axes
[  1823.350] (--) Asus gaming Mouse (G112): Found x and y relative axes
[  1823.350] (II) Asus gaming Mouse (G112): Configuring as mouse
[  1823.350] (**) Asus gaming Mouse (G112): YAxisMapping: buttons 4 and 5
[  1823.350] (**) Asus gaming Mouse (G112): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1823.350] (II) XINPUT: Adding extended input device "Asus gaming Mouse (G112)" (type: MOUSE)
[  1823.350] (**) Asus gaming Mouse (G112): (accel) keeping acceleration scheme 1
[  1823.350] (**) Asus gaming Mouse (G112): (accel) acceleration profile 0
[  1823.350] (**) Asus gaming Mouse (G112): (accel) acceleration factor: 2.000
[  1823.350] (**) Asus gaming Mouse (G112): (accel) acceleration threshold: 4
[  1823.350] (II) Asus gaming Mouse (G112): initialized for relative axes.
[  1823.350] (II) config/udev: Adding input device Asus gaming Mouse (G112) (/dev/input/mouse1)
[  1823.350] (II) No input driver/identifier specified (ignoring)
[  1823.351] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event3)
[  1823.351] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
[  1823.351] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events
[  1823.351] (**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event3"
[  1823.390] (--) Microsoft Comfort Curve Keyboard 2000: Found keys
[  1823.390] (II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
[  1823.390] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
[  1823.390] (**) Option "xkb_rules" "evdev"
[  1823.390] (**) Option "xkb_model" "evdev"
[  1823.390] (**) Option "xkb_layout" "us"
[  1823.390] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event4)
[  1823.390] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
[  1823.390] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events
[  1823.390] (**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event4"
[  1823.450] (--) Microsoft Comfort Curve Keyboard 2000: Found 1 mouse buttons
[  1823.450] (--) Microsoft Comfort Curve Keyboard 2000: Found scroll wheel(s)
[  1823.450] (--) Microsoft Comfort Curve Keyboard 2000: Found relative axes
[  1823.450] (--) Microsoft Comfort Curve Keyboard 2000: Found absolute axes
[  1823.450] (--) Microsoft Comfort Curve Keyboard 2000: Found keys
[  1823.450] (II) Microsoft Comfort Curve Keyboard 2000: Configuring as mouse
[  1823.450] (II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
[  1823.450] (**) Microsoft Comfort Curve Keyboard 2000: YAxisMapping: buttons 4 and 5
[  1823.450] (**) Microsoft Comfort Curve Keyboard 2000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1823.450] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
[  1823.450] (**) Option "xkb_rules" "evdev"
[  1823.450] (**) Option "xkb_model" "evdev"
[  1823.450] (**) Option "xkb_layout" "us"
[  1823.450] (EE) Microsoft Comfort Curve Keyboard 2000: failed to initialize for relative axes.
[  1823.450] (II) Microsoft Comfort Curve Keyboard 2000: initialized for absolute axes.
[  1823.455] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1823.455] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1823.455] (**) AT Translated Set 2 keyboard: always reports core events
[  1823.455] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1823.510] (--) AT Translated Set 2 keyboard: Found keys
[  1823.510] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[  1823.510] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[  1823.510] (**) Option "xkb_rules" "evdev"
[  1823.510] (**) Option "xkb_model" "evdev"
[  1823.510] (**) Option "xkb_layout" "us"
[  1823.510] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[  1823.510] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1823.510] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1823.510] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event1"
[  1823.570] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[  1823.570] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[  1823.570] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[  1823.570] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[  1823.570] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[  1823.570] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[  1823.570] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1823.570] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[  1823.570] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[  1823.570] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  1823.570] (II) No input driver/identifier specified (ignoring)
[  1823.570] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[  1823.570] (II) No input driver/identifier specified (ignoring)

10 Ответ от Lupo Alberto (01.02.2011 00:49:41 отредактировано Lupo Alberto)

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]
koala пишет:

[  1819.640] (EE) Failed to load module "dri" (module does not exist, 0)

Чтобы исчезли подобные ошибки, добавьте в файл /etc/X11/xorg.conf

+ открыть спойлер
Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    ModulePath      "/usr/lib/opengl/nvidia"                       ######## Добавить
    ModulePath      "/usr/lib/opengl/xorg-x11/extensions" ######## Добавить
    FontPath     "/usr/share/fonts/misc/"
    FontPath     "/usr/share/fonts/TTF/"
    FontPath     "/usr/share/fonts/OTF/"
    FontPath     "/usr/share/fonts/Type1/"
    FontPath     "/usr/share/fonts/100dpi/"
    FontPath     "/usr/share/fonts/75dpi/"
EndSection

Также добавьте секции

+ открыть спойлер
Section "InputClass"
        Identifier "keyboard-all"
        Driver "evdev"
        Option "XkbLayout" "us,ru(winkeys)"
        Option "XkbOptions" "grp:lwin_toggle,grp:switch,grp_led:caps,compose:ralt,terminate:ctrl_alt_bksp"
        MatchIsKeyboard "on"
EndSection

Section "InputClass"
        Identifier "mouse-all"
        Driver "evdev"
        MatchIsPointer "on"
EndSection

Эту секцию чуть измените — AllowEmptyInput без пробела и True

Section "ServerFlags"
        Option "AllowEmptyInput" "True"
EndSection

P.S. Прячьте большие логи под тэги spoiler — скроллить устаю  wink
P.S.S Чуть исправьте секцию

Section "Device"
    Identifier  "nVidia Inc. GeForce2"
    Driver      "nvidia"
    BusID       "PCI:1:0:0"
    Option         "NvAGP" "1" #### Добавить
EndSection
Был, был и весь вышел...
+ White Nelud

11 Ответ от White Nelud

  • White Nelud
  • White Nelud
  • Пользователь
  • Неактивен
  • Зарегистрирован: 04.01.2011
  • Сообщений: 460
  • Репутация : [ 11 | 2 ]

Lupo Alberto, спасибо вам, вы мастер своего дела =)
Насчет последнего, то я постваил дрова на видеокарту, но компиз так и не хочет работать.

12 Ответ от mister_hat

  • Зарегистрирован: 05.07.2010
  • Сообщений: 59
  • Репутация : [ 0 | 0 ]

koala пишет:

Насчет последнего, то я постваил дрова на видеокарту, но компиз так и не хочет работать

Включите композитный режим, отредактировав /etc/X11/xorg.conf (добавьте секцию "Extensions")

+ открыть спойлер

Section "Extensions"
    Option "Composite" "Enable"
EndSection

Также для проприетарных драйверов добавьте в секцию "Device" такую строку:

+ открыть спойлер

Option  "AddARGBGLXVisuals"  "True"

Funtoo linux

13 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]
mister_hat пишет:

Включите композитный режим, отредактировав /etc/X11/xorg.conf (добавьте секцию "Extensions")

Сейчас оно включено и так, по-дефолту:

...
[  1819.675] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[  1819.675] (II) NVIDIA(0):     enabled.
...
[  1821.734] (II) Initializing built-in extension COMPOSITE
...
Был, был и весь вышел...

14 Ответ от White Nelud

  • White Nelud
  • White Nelud
  • Пользователь
  • Неактивен
  • Зарегистрирован: 04.01.2011
  • Сообщений: 460
  • Репутация : [ 11 | 2 ]

Lupo Alberto, mister_hat, доббавил указаные строки но не помогло. Фильмы идут, все хорошо а вот компиз не работает.

15 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

koala, чтобы не вносить путаницу в форум, предлагаю для решения новой проблемы создавать новую тему.
В новой теме попытайтесь сразу дать нужную информацию:
1. Как появилась проблема — после установки или в процессе обновления?
2. Какое рабочее окружение или менеджер окон вы используете?
3. Дайте вывод команд

lspci -v
emerge --info
cat /etc/X11/xorg.conf
cat /var/log/Xorg.0.log
emerge -pv nvidia-drivers

P.S. Для вывода логов и больших по объёму конфигурационных файлов пользуйтесь тэгами spoiler
http://s46.radikal.ru/i113/1102/ea/e219be14fd0b.png

Был, был и весь вышел...