1 (18.04.2013 16:07:02 отредактировано goy2010)

Здравствуйте,
После вчерашнего обновления ( реп.тестинг ) ядра и драйвера nvidia 313.30-4 перестали стартовать иксы:
Загрузка происходит так: ввод команды старта иксов "startx" ( или startxfce4 ( У меня xfce ) ) - загрузка иксов - черный экран ( 4 сек ) - выброс из иксов.

  • Если запускать X Сервер из под рута, идет ругать на отсутствие «libGL.so.1», из под обычного юзера этой ошибки нет.

  • LibGL.so.1 в системе присутствует ( mesa и mesa-demos установлены )

  • работает только простейший WM - twm, другие просто не запускаются ( черный экран - после вылет без ошибок )

Лог старта иксов:

X.Org X Server 1.14.1
Release Date: 2013-04-17
[   305.315] X Protocol Version 11, Revision 0
[   305.332] Build Operating System: Linux 3.8.7-1-ARCH x86_64 
[   305.368] Current Operating System: Linux realex 3.8.8-1-ARCH #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013 x86_64
[   305.369] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a6a90ff3-39ef-417d-b82c-46dbc169deab ro quiet
[   305.429] Build Date: 17 April 2013  02:37:06PM
[   305.450]  
[   305.470] Current version of pixman: 0.28.2
[   305.512]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   305.513] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   305.606] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 18 14:42:55 2013
[   305.630] (==) Using config file: "/etc/X11/xorg.conf"
[   305.654] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   305.654] (==) ServerLayout "Layout0"
[   305.654] (**) |-->Screen "Screen0" (0)
[   305.654] (**) |   |-->Monitor "Monitor0"
[   305.654] (**) |   |-->Device "Device0"
[   305.654] (**) |-->Input Device "Keyboard0"
[   305.654] (**) |-->Input Device "Mouse0"
[   305.654] (==) Automatically adding devices
[   305.654] (==) Automatically enabling devices
[   305.654] (==) Automatically adding GPU devices
[   305.654] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   305.654]     Entry deleted from font path.
[   305.654] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   305.654]     Entry deleted from font path.
[   305.654]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   305.654] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   305.654]     Entry deleted from font path.
[   305.654]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   305.654] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
[   305.654] (==) ModulePath set to "/usr/lib/xorg/modules"
[   305.654] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   305.654] (WW) Disabling Keyboard0
[   305.654] (WW) Disabling Mouse0
[   305.654] (II) Loader magic: 0x7fcc20
[   305.654] (II) Module ABI versions:
[   305.654]     X.Org ANSI C Emulation: 0.4
[   305.654]     X.Org Video Driver: 14.1
[   305.654]     X.Org XInput driver : 19.1
[   305.654]     X.Org Server Extension : 7.0
[   305.655] (--) PCI:*(0:5:0:0) 10de:11c6:1569:11c6 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf2000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[   305.679] Initializing built-in extension Generic Event Extension
[   305.702] Initializing built-in extension SHAPE
[   305.725] Initializing built-in extension MIT-SHM
[   305.747] Initializing built-in extension XInputExtension
[   305.769] Initializing built-in extension XTEST
[   305.790] Initializing built-in extension BIG-REQUESTS
[   305.810] Initializing built-in extension SYNC
[   305.830] Initializing built-in extension XKEYBOARD
[   305.850] Initializing built-in extension XC-MISC
[   305.870] Initializing built-in extension SECURITY
[   305.890] Initializing built-in extension XINERAMA
[   305.909] Initializing built-in extension XFIXES
[   305.928] Initializing built-in extension RENDER
[   305.947] Initializing built-in extension RANDR
[   305.964] Initializing built-in extension COMPOSITE
[   305.980] Initializing built-in extension DAMAGE
[   305.995] Initializing built-in extension MIT-SCREEN-SAVER
[   306.010] Initializing built-in extension DOUBLE-BUFFER
[   306.023] Initializing built-in extension RECORD
[   306.036] Initializing built-in extension DPMS
[   306.049] Initializing built-in extension X-Resource
[   306.062] Initializing built-in extension XVideo
[   306.074] Initializing built-in extension XVideo-MotionCompensation
[   306.085] Initializing built-in extension XFree86-VidModeExtension
[   306.096] Initializing built-in extension XFree86-DGA
[   306.105] Initializing built-in extension XFree86-DRI
[   306.114] Initializing built-in extension DRI2
[   306.114] (II) LoadModule: "glx"
[   306.114] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   306.121] (II) Module glx: vendor="NVIDIA Corporation"
[   306.121]     compiled for 4.0.2, module version = 1.0.0
[   306.121]     Module class: X.Org Server Extension
[   306.121] (II) NVIDIA GLX Module  313.30  Wed Mar 27 15:51:21 PDT 2013
[   306.129] Loading extension GLX
[   306.129] (II) LoadModule: "nvidia"
[   306.129] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   306.129] (II) Module nvidia: vendor="NVIDIA Corporation"
[   306.129]     compiled for 4.0.2, module version = 1.0.0
[   306.129]     Module class: X.Org Video Driver
[   306.129] (II) NVIDIA dlloader X Driver  313.30  Wed Mar 27 15:33:21 PDT 2013
[   306.129] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   306.129] (++) using VT number 1

[   306.129] (II) Loading sub module "wfb"
[   306.129] (II) LoadModule: "wfb"
[   306.129] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   306.129] (II) Module wfb: vendor="X.Org Foundation"
[   306.129]     compiled for 1.14.1, module version = 1.0.0
[   306.129]     ABI class: X.Org ANSI C Emulation, version 0.4
[   306.129] (II) Loading sub module "ramdac"
[   306.129] (II) LoadModule: "ramdac"
[   306.129] (II) Module "ramdac" already built-in
[   306.129] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   306.129] (==) NVIDIA(0): RGB weight 888
[   306.129] (==) NVIDIA(0): Default visual is TrueColor
[   306.129] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   306.130] (**) NVIDIA(0): Enabling 2D acceleration
[   306.504] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[   306.504] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   306.506] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 650 Ti (GK106) at PCI:5:0:0 (GPU-0)
[   306.506] (--) NVIDIA(0): Memory: 1048576 kBytes
[   306.506] (--) NVIDIA(0): VideoBIOS: 80.06.21.00.1e
[   306.506] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   306.510] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 650 Ti at PCI:5:0:0
[   306.510] (--) NVIDIA(0):     CRT-0
[   306.510] (--) NVIDIA(0):     DFP-0
[   306.510] (--) NVIDIA(0):     Samsung SyncMaster (DFP-1) (connected)
[   306.510] (--) NVIDIA(0): CRT-0: 480.0 MHz maximum pixel clock
[   306.510] (--) NVIDIA(0): DFP-0: 165.0 MHz maximum pixel clock
[   306.510] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[   306.510] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock
[   306.510] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal Dual Link TMDS
[   306.510] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   306.510] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[   306.510] (**) NVIDIA(0):     has been enabled on all display devices.)
[   306.511] (==) NVIDIA(0): 
[   306.512] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   306.512] (==) NVIDIA(0):     will be used as the requested mode.
[   306.512] (==) NVIDIA(0): 
[   306.512] (II) NVIDIA(0): Validated MetaModes:
[   306.512] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select"
[   306.512] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[   306.542] (--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
[   306.542] (--) NVIDIA(0):     option
[   306.542] (--) Depth 24 pixmap format is 32 bpp
[   306.542] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[   306.542] (II) NVIDIA:     access.
[   306.546] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   306.546] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   306.546] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   306.546] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   306.546] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   306.546] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   306.546] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   306.546] (II) NVIDIA(0):     Config Options in the README.
[   306.549] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[   306.591] Loading extension NV-GLX
[   306.613] (==) NVIDIA(0): Disabling shared memory pixmaps
[   306.613] (==) NVIDIA(0): Backing store disabled
[   306.613] (==) NVIDIA(0): Silken mouse enabled
[   306.613] (**) NVIDIA(0): DPMS enabled
[   306.613] Loading extension NV-CONTROL
[   306.613] Loading extension XINERAMA
[   306.613] (II) Loading sub module "dri2"
[   306.613] (II) LoadModule: "dri2"
[   306.613] (II) Module "dri2" already built-in
[   306.613] (II) NVIDIA(0): [DRI2] Setup complete
[   306.613] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   306.613] (--) RandR disabled
[   306.617] (II) Initializing extension GLX
[   306.658] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   306.658] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   306.658] (II) LoadModule: "evdev"
[   306.658] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   306.658] (II) Module evdev: vendor="X.Org Foundation"
[   306.658]     compiled for 1.14.0, module version = 2.8.0
[   306.658]     Module class: X.Org XInput Driver
[   306.658]     ABI class: X.Org XInput driver, version 19.1
[   306.658] (II) Using input driver 'evdev' for 'Power Button'
[   306.658] (**) Power Button: always reports core events
[   306.658] (**) evdev: Power Button: Device: "/dev/input/event4"
[   306.658] (--) evdev: Power Button: Vendor 0 Product 0x1
[   306.658] (--) evdev: Power Button: Found keys
[   306.658] (II) evdev: Power Button: Configuring as keyboard
[   306.658] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   306.658] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   306.658] (**) Option "xkb_rules" "evdev"
[   306.658] (**) Option "xkb_model" "evdev"
[   306.658] (**) Option "xkb_layout" "us"
[   306.684] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   306.684] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   306.684] (II) Using input driver 'evdev' for 'Power Button'
[   306.684] (**) Power Button: always reports core events
[   306.684] (**) evdev: Power Button: Device: "/dev/input/event3"
[   306.684] (--) evdev: Power Button: Vendor 0 Product 0x1
[   306.684] (--) evdev: Power Button: Found keys
[   306.684] (II) evdev: Power Button: Configuring as keyboard
[   306.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[   306.684] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   306.684] (**) Option "xkb_rules" "evdev"
[   306.684] (**) Option "xkb_model" "evdev"
[   306.684] (**) Option "xkb_layout" "us"
[   306.685] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event10)
[   306.685] (II) No input driver specified, ignoring this device.
[   306.685] (II) This device may have been added with another device file.
[   306.685] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event11)
[   306.685] (II) No input driver specified, ignoring this device.
[   306.685] (II) This device may have been added with another device file.
[   306.685] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event12)
[   306.685] (II) No input driver specified, ignoring this device.
[   306.685] (II) This device may have been added with another device file.
[   306.685] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event13)
[   306.685] (II) No input driver specified, ignoring this device.
[   306.685] (II) This device may have been added with another device file.
[   306.686] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event6)
[   306.686] (II) No input driver specified, ignoring this device.
[   306.686] (II) This device may have been added with another device file.
[   306.686] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event7)
[   306.686] (II) No input driver specified, ignoring this device.
[   306.686] (II) This device may have been added with another device file.
[   306.686] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event8)
[   306.686] (II) No input driver specified, ignoring this device.
[   306.686] (II) This device may have been added with another device file.
[   306.687] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event9)
[   306.687] (II) No input driver specified, ignoring this device.
[   306.687] (II) This device may have been added with another device file.
[   306.687] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[   306.687] (II) No input driver specified, ignoring this device.
[   306.687] (II) This device may have been added with another device file.
[   306.687] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[   306.687] (II) No input driver specified, ignoring this device.
[   306.687] (II) This device may have been added with another device file.
[   306.687] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[   306.687] (II) No input driver specified, ignoring this device.
[   306.687] (II) This device may have been added with another device file.
[   306.687] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[   306.687] (II) No input driver specified, ignoring this device.
[   306.687] (II) This device may have been added with another device file.
[   306.688] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event1)
[   306.688] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[   306.688] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[   306.688] (**) A4TECH USB Device: always reports core events
[   306.688] (**) evdev: A4TECH USB Device: Device: "/dev/input/event1"
[   306.688] (II) evdev: A4TECH USB Device: Using mtdev for this device
[   306.688] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[   306.688] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[   306.688] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[   306.688] (--) evdev: A4TECH USB Device: Found relative axes
[   306.688] (--) evdev: A4TECH USB Device: Found absolute axes
[   306.688] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
[   306.688] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[   306.688] (--) evdev: A4TECH USB Device: Found keys
[   306.688] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
[   306.688] (II) evdev: A4TECH USB Device: Configuring as mouse
[   306.688] (II) evdev: A4TECH USB Device: Configuring as keyboard
[   306.688] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[   306.688] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[   306.688] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   306.688] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input1/event1"
[   306.688] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 8)
[   306.688] (**) Option "xkb_rules" "evdev"
[   306.688] (**) Option "xkb_model" "evdev"
[   306.688] (**) Option "xkb_layout" "us"
[   306.689] (II) evdev: A4TECH USB Device: initialized for relative axes.
[   306.689] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[   306.689] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[   306.689] (**) A4TECH USB Device: (accel) acceleration profile 0
[   306.689] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[   306.689] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[   306.689] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[   306.689] (II) No input driver specified, ignoring this device.
[   306.689] (II) This device may have been added with another device file.
[   306.690] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
[   306.690] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[   306.690] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[   306.690] (**) A4TECH USB Device: always reports core events
[   306.690] (**) evdev: A4TECH USB Device: Device: "/dev/input/event2"
[   306.690] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[   306.690] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[   306.690] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[   306.690] (--) evdev: A4TECH USB Device: Found relative axes
[   306.690] (--) evdev: A4TECH USB Device: Found x and y relative axes
[   306.690] (II) evdev: A4TECH USB Device: Configuring as mouse
[   306.690] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[   306.690] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[   306.690] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   306.690] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input2/event2"
[   306.690] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 9)
[   306.690] (II) evdev: A4TECH USB Device: initialized for relative axes.
[   306.691] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[   306.691] (**) A4TECH USB Device: (accel) acceleration profile 0
[   306.691] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[   306.691] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[   306.691] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[   306.691] (II) No input driver specified, ignoring this device.
[   306.691] (II) This device may have been added with another device file.
[   306.692] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   306.692] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   306.692] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   306.692] (**) AT Translated Set 2 keyboard: always reports core events
[   306.692] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   306.692] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   306.692] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   306.692] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   306.692] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   306.692] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   306.692] (**) Option "xkb_rules" "evdev"
[   306.692] (**) Option "xkb_model" "evdev"
[   306.692] (**) Option "xkb_layout" "us"
[   306.692] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[   306.692] (II) No input driver specified, ignoring this device.
[   306.692] (II) This device may have been added with another device file.
[   306.809] (II) evdev: AT Translated Set 2 keyboard: Close
[   306.809] (II) UnloadModule: "evdev"
[   306.809] (II) evdev: A4TECH USB Device: Close
[   306.809] (II) UnloadModule: "evdev"
[   306.809] (II) evdev: A4TECH USB Device: Close
[   306.809] (II) UnloadModule: "evdev"
[   306.809] (II) evdev: Power Button: Close
[   306.809] (II) UnloadModule: "evdev"
[   306.809] (II) evdev: Power Button: Close
[   306.809] (II) UnloadModule: "evdev"
[   307.102] Server terminated successfully (0). Closing log file.

xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 313.30  (buildmeister@swio-display-x86-rhel47-05)  Wed Mar 27 16:37:22 PDT 2013

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Можно ли как-то заставить работать иксы ? или ждать патча ? ( в баг трекере арча об этом ничего нет )
Зар.спс

ps: Проблема имеется во всех DE, стартует только один WM - twm.

2

IMHO, название темы поменять надо — «иксы», как видно из лога, стартуют. Проблемы-то в XFce4.

Был, был и весь вышел...

3 (18.04.2013 12:20:57 отредактировано goy2010)

Проблема имеется во всех DE, стартует только один WM - twm.

4

Попробуйте в качестве «эксперимента» запустить DE от нового пользователя.
P.S. При запуске от обычного пользователя в ~/.xsession-errors ничего интересного не пишется?

Был, был и весь вышел...

5

Странно, но ~/.xsession-errors нет вообще... сейчас проверю нового пользователя.

6 (18.04.2013 13:18:12 отредактировано goy2010)

От нового юзера тоже не запускается, совсем нет идей ? ab

7

Покажите

ls -lH `which X`

P.S. Обновление каких пакетов привело к ошибке, не помните?

Был, был и весь вышел...

Простите, что встреваю, ни разу не Арч... Но точно все репы казённые?

9 (18.04.2013 14:58:21 отредактировано goy2010)

Lupo Alberto,
С переменным успехом загрузил систему с нарушениями зависимостей:
Принудительно удалить 3д либы nvidia - "nvidia-libgl", подсунул вместо них "mesa-libgl"
Иксы завелись, но с жуткими тормозами.

Все уперлось в ошибку "libgl.so.1 cannot open shared object file" которая возникает при запуске иксов с nvidia-libgl командой xinit, при запуске с mesa-libgl все запускается без ошибок.
Видемо в пакете nvidia-libgl что-то испортили и прийдется ждать патчей или можно что-то сделать самому ?
nvidia-libgl 313.30-2 конфликтят с nvidia 313.30-4 ( из тестинга )
karl_muenhgausen,
Да, только тестинг добавлен ab

goy2010 пишет:

Да, только тестинг добавлен ab


Sapienti sat ©

11 (18.04.2013 15:34:49 отредактировано goy2010)

karl_muenhgausen,
На моем оборудовании адекватно работает только ядро из тестинга, вот и выкручиваюсь bx
Компилировать ядро не вариант.

12

Проблема решилась весьма странно, после установки пакета mesa-libgl ( замена nvidia-libgl на mesa-libgl )  библиотека libgl.so.1 стала видема иксами, далее я просто заменил пакет mesa-libgl на nvidia-libgl и иксы нормально запустились ab
спасибо за помощь.

goy2010 пишет:

На моем оборудовании адекватно работает только ядро из тестинга, вот и выкручиваюсь bx
Компилировать ядро не вариант.

Другой дистрибутив - всегда вариант.