В общем.Поставил недавно линукс.винду снёс к чертям(сегодня пытался установить винду,поставил дрова что ставил раньше - не работает звук и там) думаю что-то сгорело..а проверить никак =(
Ну ладно.
я не люблю винду,сижу на минте 15том теперь.
раньше линуксом не балывал себя.теперь удивлён классной системе,а вот звук напрягает
так.
НАчну тесты!
(я брал команды из этой темы linuxforum.ru/viewtopic.php?id=28354 )
(команды которые вводил прекрасно видно на скриншоте!)
Потом выполнил команду:(после которой сейчас перезагружу систему и отпишу в тему)
потом ввёл:(это пост пользывателя)
Запустите какой-либо аудио -плеер и покажите вывод
pactl list
и
amixer -c 0 scontents
и вот что выдала первая команда(в момент ввода команды я через плеер включил музыку):
[*] device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.name = "MCP61 High Definition Audio"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.pci-0000_00_05.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 4
Mute: no
Volume: 0: 15% 1: 15%
0: -48,75 dB 1: -48,75 dB
balance 0,00
Base Volume: 10%
-60,75 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1705 Analog"
alsa.id = "VT1705 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xfbef8000 irq 22"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:05.0"
sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.name = "MCP61 High Definition Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "VIA VT1705"
alsa.components = "HDA:11064397,18490397,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-microphone-front: Front Microphone (priority: 8500)
analog-input-microphone-rear: Rear Microphone (priority: 8200, available)
analog-input-linein: Line In (priority: 8100, not available)
Active Port: analog-input-microphone-front
Formats:
pcm
Sink Input #4
Driver: protocol-native.c
Owner Module: 8
Client: 15
Sink: 0
Sample Specification: float32le 2ch 44014Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Buffer Latency: 5287045 usec
Sink Latency: 0 usec
Resample method: speex-float-1
Properties:
media.name = "audio stream"
application.name = "VLC media player"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "27"
application.id = "org.VideoLAN.VLC"
application.version = "2.0.6"
application.icon_name = "vlc"
application.language = "ru_RU.UTF-8"
application.process.id = "5600"
application.process.machine_id = "2f6a9045c2bc8db6bf32b2d7517969bf"
application.process.session_id = "2f6a9045c2bc8db6bf32b2d7517969bf-1378316317.528593-2008511129"
application.process.user = "max"
application.process.host = "max-desktop"
application.process.binary = "vlc"
window.x11.display = ":0.0"
module-stream-restore.id = "sink-input-by-application-id:org.VideoLAN.VLC"
Client #0
Driver: module-console-kit.c
Owner Module: 14
Properties:
application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
console-kit.session = "/org/freedesktop/ConsoleKit/Session1"
Client #5
Driver: module-x11-xsmp.c
Owner Module: 22
Properties:
application.name = "XSMP Session on gnome-session as 109b57ebdb127a5bdc137831632213243800000014670028"
xsmp.vendor = "gnome-session"
xsmp.client.id = "109b57ebdb127a5bdc137831632213243800000014670028"
Client #6
Driver: protocol-native.c
Owner Module: 8
Properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "27"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.6.4"
application.process.id = "1588"
application.process.user = "max"
application.process.host = "max-desktop"
application.process.binary = "gnome-settings-daemon"
application.language = "ru_RU.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "2f6a9045c2bc8db6bf32b2d7517969bf"
Client #7
Driver: protocol-native.c
Owner Module: 8
Properties:
application.name = "Cinnamon"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "27"
application.id = "org.Cinnamon"
application.process.id = "1771"
application.process.user = "max"
application.process.host = "max-desktop"
application.process.binary = "cinnamon"
application.language = "ru_RU.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "2f6a9045c2bc8db6bf32b2d7517969bf"
Client #8
Driver: protocol-native.c
Owner Module: 8
Properties:
application.name = "Cinnamon Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "27"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "1.8.6"
application.process.id = "1771"
application.process.user = "max"
application.process.host = "max-desktop"
application.process.binary = "cinnamon"
application.language = "ru_RU.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "2f6a9045c2bc8db6bf32b2d7517969bf"
Client #15
Driver: protocol-native.c
Owner Module: 8
Properties:
application.name = "VLC media player"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "27"
application.id = "org.VideoLAN.VLC"
application.version = "2.0.6"
application.icon_name = "vlc"
application.language = "ru_RU.UTF-8"
application.process.id = "5600"
application.process.machine_id = "2f6a9045c2bc8db6bf32b2d7517969bf"
application.process.session_id = "2f6a9045c2bc8db6bf32b2d7517969bf-1378316317.528593-2008511129"
application.process.user = "max"
application.process.host = "max-desktop"
application.process.binary = "vlc"
window.x11.display = ":0.0"
Client #16
Driver: protocol-native.c
Owner Module: 8
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "27"
application.process.id = "5679"
application.process.user = "root"
application.process.host = "max-desktop"
application.process.binary = "pactl"
application.language = "ru_RU.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "2f6a9045c2bc8db6bf32b2d7517969bf"
Sample #0
Name: dialog-question.wav
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/dialog-question.wav
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/dialog-question.wav"
Sample #1
Name: dialog-question.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/dialog-question.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/dialog-question.ogg"
Sample #2
Name: phone-incoming-call.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/phone-incoming-call.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/phone-incoming-call.ogg"
Sample #3
Name: button-toggle-on.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/button-toggle-on.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/button-toggle-on.ogg"
Sample #4
Name: desktop-login.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/desktop-login.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/desktop-login.ogg"
Sample #5
Name: desktop-logout.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/desktop-logout.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/desktop-logout.ogg"
Sample #6
Name: button-pressed.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/button-pressed.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/button-pressed.ogg"
Sample #7
Name: button-toggle-off.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/button-toggle-off.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/button-toggle-off.ogg"
Sample #8
Name: window-slide.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/window-slide.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/window-slide.ogg"
Sample #9
Name: dialog-warning.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/dialog-warning.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/dialog-warning.ogg"
Sample #10
Name: dialog-information.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/dialog-information.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/dialog-information.ogg"
Sample #11
Name: system-ready.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/system-ready.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/system-ready.ogg"
Sample #12
Name: dialog-error.ogg
Sample Specification: n/a
Channel Map: n/a
Volume: (invalid)
(invalid)
balance 0,00
Duration: 0,0s
Size: 0 B
Lazy: yes
Filename: /usr/share/sounds/LinuxMint/stereo/dialog-error.ogg
Properties:
media.role = "event"
media.filename = "/usr/share/sounds/LinuxMint/stereo/dialog-error.ogg"
Card #0
Name: alsa_card.pci-0000_00_05.0
Driver: module-alsa-card.c
Owner Module: 4
Properties:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xfbef8000 irq 22"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:05.0"
sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.name = "MCP61 High Definition Audio"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority. 60)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority. 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority. 6060)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority. 700)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority. 760)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority. 800)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority. 860)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority. 700)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority. 760)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority. 800)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority. 860)
off: Off (sinks: 0, sources: 0, priority. 0)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-microphone-front: Front Microphone (priority: 8500, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo
analog-input-microphone-rear: Rear Microphone (priority: 8200, latency offset: 0 usec, available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo
analog-input-linein: Line In (priority: 8100, latency offset: 0 usec, not available)
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo
analog-output: Analog Output (priority: 9900, latency offset: 0 usec)
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
[/*]
вторая команда выдала это:
amixer -c 0 scontents
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
дам любые скрины.но думаю инфы и так много
прошу помочь.
а я пока перезагружусь.я знаю у вас хороший форум(на офф.форуме минта русском я даже зарегаться не смог,не пришло письмо никуда!!)