1

Уважаемые мудрецы помогите пожалуйста !!!
Подскажите какие репозитории нужно добавить на стоковую сборку 1.0.8 ???
И как установить драйвера nvidia на gt650m (ноутбук)
В системе Linux я зеленый новичок всю жизнь юзал win-ду, поэтому ссылки на учебную литературу приветствуются. Заранее благодарен

2 (21.08.2014 22:43:49 отредактировано XliN)

Потратил 5 минут личного времени. Почему Вы этого не сделали?
Репозитории: http://docs.kali.org/general-use/kali-l … positories
Дрова на видео: http://docs.kali.org/general-use/instal … kali-linux

MX Linux 21.2 x86_64
Чем больше я работаю админом, тем больше понимаю, насколько волшебна фраза - "Нет технической возможности!"

3

XliN - низкий поклон за отзывчивость. Наверное просто устал за весь день, столько форумов перечитал что глаза на лоб лезут, вот попросил помощи у знатоков )))

4 (30.08.2014 00:28:51 отредактировано den54)

Доброго времени суток! Установил bumblebee, optirun сыпет ошибки (((

optirun glxgears -info
[   70.515833] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[   70.515923] [ERROR]Aborting because fallback start is disabled.

5

выаод команды lspci

lspci | egrep 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 650M] (rev a1)

6

den54, вот с этого и надо было начать. Ноутбуки с Optimus по сей день все еще являются источником проблем.
https://forums.kali.org/showthread.php? … l-problems
Проверьте членство пользователя в группах video, bumblebee, plugdev:

id

Покажите ваш /var/log/Xorg.0.log, вывод

sudo dmesg

.

Истинный hotplug - это обычная электрическая розетка: воткнул - работает, и никаких драйверов.
Slackware64-current/Xfce/Lenovo G580

7

id
uid=0(root) gid=0(root) группы=0(root),999(bumblebee)

root@kali:~# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14-kali1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.14.5-1kali1 (2014-06-07)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-kali1-amd64 root=UUID=325c69bc-2a75-4efc-81d0-516f6cbc1670 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a58fcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a58fd000-0x00000000a5afefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a5aff000-0x00000000b7f54fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b7f55000-0x00000000baeeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc.          Inspiron 7720/04M3YM, BIOS A16 08/23/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 23F800000 mask FFF800000 uncachable
[    0.000000]   8 base 23F600000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aa3000, 0x01aa3fff] PGTABLE
[    0.000000] BRK [0x01aa4000, 0x01aa4fff] PGTABLE
[    0.000000] BRK [0x01aa5000, 0x01aa5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
[    0.000000]  [mem 0x23f400000-0x23f5fffff] page 2M
[    0.000000] BRK [0x01aa6000, 0x01aa6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23c000000-0x23f3fffff]
[    0.000000]  [mem 0x23c000000-0x23f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[    0.000000]  [mem 0x200000000-0x23bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01aa7000, 0x01aa7fff] PGTABLE
[    0.000000] BRK [0x01aa8000, 0x01aa8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xa58fcfff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xa57fffff] page 2M
[    0.000000]  [mem 0xa5800000-0xa58fcfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa5aff000-0xb7f54fff]
[    0.000000]  [mem 0xa5aff000-0xa5bfffff] page 4k
[    0.000000]  [mem 0xa5c00000-0xb7dfffff] page 2M
[    0.000000]  [mem 0xb7e00000-0xb7f54fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbafff000-0xbaffffff]
[    0.000000]  [mem 0xbafff000-0xbaffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x35cbc000-0x36e55fff]
[    0.000000] ACPI: RSDP 00000000000f0120 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000baffe170 0000A4 (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: FACP 00000000bafe3000 00010C (v05 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: DSDT 00000000baff1000 00A7C4 (v02 DELL    IVB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000baf7c000 000040
[    0.000000] ACPI: SLIC 00000000baffd000 000176 (v01 DELL    QA09    00000002 LOHR 00000001)
[    0.000000] ACPI: SSDT 00000000baffc000 000166 (v01 DELL   PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000baff0000 0000A5 (v32 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: HPET 00000000bafed000 000038 (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: APIC 00000000bafec000 000098 (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: MCFG 00000000bafeb000 00003C (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: FPDT 00000000bafea000 000064 (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: SSDT 00000000bafe9000 000926 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000bafe8000 000A92 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000bafe7000 00003E (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: UEFI 00000000bafe6000 000042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: MSDM 00000000bafe5000 000055 (v03 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: SSDT 00000000bafe2000 000EB6 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000bafe1000 00027E (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: DBG2 00000000bafdf000 000070 (v00 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
[    0.000000]   NODE_DATA [mem 0x23f5f2000-0x23f5f6fff]
[    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236c00000-ffff88023dbfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xa58fcfff]
[    0.000000]   node   0: [mem 0xa5aff000-0xb7f54fff]
[    0.000000]   node   0: [mem 0xbafff000-0xbaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x23f5fffff]
[    0.000000] On node 0 totalpages: 2060527
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10232 pages used for memmap
[    0.000000]   DMA32 zone: 748371 pages, LIFO batch:31
[    0.000000]   Normal zone: 17885 pages used for memmap
[    0.000000]   Normal zone: 1308160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa58fd000-0xa5afefff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7f55000-0xbaeeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaeef000-0xbaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023f200000 s86016 r8192 d20480 u262144
[    0.000000] pcpu-alloc: s86016 r8192 d20480 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2032333
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-kali1-amd64 root=UUID=325c69bc-2a75-4efc-81d0-516f6cbc1670 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8031140K/8242108K available (5102K kernel code, 703K rwdata, 1684K rodata, 1004K init, 960K bss, 210968K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.550 MHz processor
[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.10 BogoMIPS (lpj=9578200)
[    0.000033] pid_max: default: 32768 minimum: 301
[    0.000040] ACPI: Core revision 20131218
[    0.005055] ACPI: All ACPI Tables successfully acquired
[    0.005356] Security Framework initialized
[    0.005360] AppArmor: AppArmor disabled by boot time parameter
[    0.005361] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.005813] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.007813] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008724] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008733] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008917] Initializing cgroup subsys memory
[    0.008922] Initializing cgroup subsys devices
[    0.008923] Initializing cgroup subsys freezer
[    0.008925] Initializing cgroup subsys net_cls
[    0.008926] Initializing cgroup subsys blkio
[    0.008927] Initializing cgroup subsys perf_event
[    0.008949] CPU: Physical Processor ID: 0
[    0.008950] CPU: Processor Core ID: 0
[    0.008954] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.008954] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.009325] mce: CPU supports 9 MCE banks
[    0.009335] CPU0: Thermal monitoring handled by SMI
[    0.009345] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.009345] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009345] tlb_flushall_shift: 2
[    0.009441] Freeing SMP alternatives memory: 20K (ffffffff819ac000 - ffffffff819b1000)
[    0.011052] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.050770] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[    0.050777] TSC deadline timer enabled
[    0.050785] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.050791] ... version:                3
[    0.050792] ... bit width:              48
[    0.050793] ... generic registers:      4
[    0.050794] ... value mask:             0000ffffffffffff
[    0.050795] ... max period:             0000ffffffffffff
[    0.050796] ... fixed-purpose events:   3
[    0.050797] ... event mask:             000000070000000f
[    0.051065] x86: Booting SMP configuration:
[    0.051067] .... node  #0, CPUs:      #1
[    0.062581] CPU1: Thermal monitoring handled by SMI
[    0.064779] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.064869]  #2
[    0.076301] CPU2: Thermal monitoring handled by SMI
[    0.078513]  #3<7>[    0.089943] CPU3: Thermal monitoring handled by SMI
[    0.103600]  #4
[    0.103601] CPU4: Thermal monitoring handled by SMI
[    0.117237]  #5
[    0.117237] CPU5: Thermal monitoring handled by SMI
[    0.130889]  #6
[    0.130889] CPU6: Thermal monitoring handled by SMI
[    0.144524]  #7
[    0.144524] CPU7: Thermal monitoring handled by SMI
[    0.146633] x86: Booted up 1 node, 8 CPUs
[    0.146636] smpboot: Total of 8 processors activated (38312.80 BogoMIPS)
[    0.153600] devtmpfs: initialized
[    0.156268] PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
[    0.156418] pinctrl core: initialized pinctrl subsystem
[    0.156475] NET: Registered protocol family 16
[    0.156556] cpuidle: using governor ladder
[    0.156557] cpuidle: using governor menu
[    0.156583] ACPI: bus type PCI registered
[    0.156585] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.156670] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.156672] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.162857] PCI: Using configuration type 1 for base access
[    0.163734] bio: create slab <bio-0> at 0
[    0.163839] ACPI: Added _OSI(Module Device)
[    0.163840] ACPI: Added _OSI(Processor Device)
[    0.163841] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.163842] ACPI: Added _OSI(Processor Aggregator Device)
[    0.166222] ACPI: Executed 2 blocks of module-level executable AML code
[    0.189454] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.189920] ACPI: SSDT 00000000bae8e018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.190230] ACPI: Dynamic OEM Table Load:
[    0.190232] ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.201672] ACPI: SSDT 00000000bae8fa98 000303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.202009] ACPI: Dynamic OEM Table Load:
[    0.202010] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.213561] ACPI: SSDT 00000000bae8dd98 000119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.213863] ACPI: Dynamic OEM Table Load:
[    0.213864] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.227578] ACPI: Interpreter enabled
[    0.227584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.227588] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.227600] ACPI: (supports S0 S3 S4 S5)
[    0.227601] ACPI: Using IOAPIC for interrupt routing
[    0.227626] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.227760] ACPI: No dock devices found.
[    0.233930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.233936] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.234055] \_SB_.PCI0:_OSC invalid UUID
[    0.234056] _OSC request data:1 1f 0 
[    0.234059] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.234726] PCI host bridge to bus 0000:00
[    0.234728] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.234730] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.234732] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.234734] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.234735] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[    0.234742] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.234815] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.234846] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.234872] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.234912] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.234923] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.234929] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.234934] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.235023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.235046] pci 0000:00:14.0: reg 0x10: [mem 0xf1600000-0xf160ffff 64bit]
[    0.235119] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.235147] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.235189] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.235213] pci 0000:00:16.0: reg 0x10: [mem 0xf1615000-0xf161500f 64bit]
[    0.235290] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.235364] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.235386] pci 0000:00:1a.0: reg 0x10: [mem 0xf161a000-0xf161a3ff]
[    0.235478] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.235521] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.235564] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.235580] pci 0000:00:1b.0: reg 0x10: [mem 0xf1610000-0xf1613fff 64bit]
[    0.235656] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.235726] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.235859] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.235901] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.235941] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.236023] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.236058] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.236101] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.236122] pci 0000:00:1d.0: reg 0x10: [mem 0xf1619000-0xf16193ff]
[    0.236214] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.236256] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.236296] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.236459] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.236478] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.236486] pci 0000:00:1f.2: reg 0x14: [io  0x409c-0x409f]
[    0.236494] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.236502] pci 0000:00:1f.2: reg 0x1c: [io  0x4098-0x409b]
[    0.236511] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.236519] pci 0000:00:1f.2: reg 0x24: [mem 0xf1618000-0xf16187ff]
[    0.236566] pci 0000:00:1f.2: PME# supported from D3hot
[    0.236626] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.236642] pci 0000:00:1f.3: reg 0x10: [mem 0xf1614000-0xf16140ff 64bit]
[    0.236663] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.236780] pci 0000:01:00.0: [10de:0fd1] type 00 class 0x030000
[    0.236791] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.236804] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.236816] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.236825] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.236833] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.236899] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.241514] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.241519] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.241524] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.241530] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.241705] pci 0000:02:00.0: [8086:0887] type 00 class 0x028000
[    0.241752] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf1501fff 64bit]
[    0.242002] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.242050] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.249575] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.249584] pci 0000:00:1c.0:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.249681] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.249701] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.249736] pci 0000:03:00.0: reg 0x18: [mem 0xf1404000-0xf1404fff 64bit pref]
[    0.249758] pci 0000:03:00.0: reg 0x20: [mem 0xf1400000-0xf1403fff 64bit pref]
[    0.249872] pci 0000:03:00.0: supports D1 D2
[    0.249874] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.249913] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.257546] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.257553] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.257569] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.257800] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.257849] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.257897] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.257943] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.257990] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.258037] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.258085] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.258133] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.258242] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.258300] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.258371] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.258376] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.258377] vgaarb: loaded
[    0.258377] vgaarb: bridge control possible 0000:01:00.0
[    0.258378] vgaarb: no bridge control possible 0000:00:02.0
[    0.258412] PCI: Using ACPI for IRQ routing
[    0.259998] PCI: pci_cache_line_size set to 64 bytes
[    0.260093] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.260094] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.260095] e820: reserve RAM buffer [mem 0xa58fd000-0xa7ffffff]
[    0.260097] e820: reserve RAM buffer [mem 0xb7f55000-0xb7ffffff]
[    0.260098] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.260099] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[    0.260197] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.260201] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.262226] Switched to clocksource hpet
[    0.263796] pnp: PnP ACPI init
[    0.263806] ACPI: bus type PNP registered
[    0.263828] pnp 00:00: [dma 4]
[    0.263847] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.263933] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.263961] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.264002] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.264004] system 00:03: [io  0x1000-0x1003] has been reserved
[    0.264005] system 00:03: [io  0x1004-0x1013] has been reserved
[    0.264007] system 00:03: [io  0xffff] has been reserved
[    0.264009] system 00:03: [io  0x0400-0x0453] could not be reserved
[    0.264011] system 00:03: [io  0x0458-0x047f] has been reserved
[    0.264012] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.264014] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.264016] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264040] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.264084] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.264086] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.264124] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.264152] pnp 00:07: Plug and Play ACPI device, IDs DLL0578 PNP0f13 (active)
[    0.264252] pnp 00:08: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    0.264273] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.264275] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.264277] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.264279] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.264281] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.264283] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.264284] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.264286] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.264288] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.264290] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.264292] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264517] pnp: PnP ACPI: found 9 devices
[    0.264518] ACPI: bus type PNP unregistered
[    0.270741] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.270771] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[    0.270773] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.270775] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.270777] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.270780] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.270783] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.270790] pci 0000:00:1c.0:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.270802] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.270805] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.270812] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.270819] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.270821] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.270822] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.270824] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    0.270825] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.270827] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf0ffffff]
[    0.270828] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.270830] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.270832] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.270833] pci_bus 0000:03: resource 2 [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.270916] NET: Registered protocol family 2
[    0.271122] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.271265] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.271372] TCP: Hash tables configured (established 65536 bind 65536)
[    0.271387] TCP: reno registered
[    0.271397] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.271421] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.271515] NET: Registered protocol family 1
[    0.271525] pci 0000:00:02.0: Boot video device
[    0.271952] PCI: CLS 64 bytes, default 64
[    0.271989] Unpacking initramfs...
[    0.558315] Freeing initrd memory: 18024K (ffff880035cbc000 - ffff880036e56000)
[    0.558320] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.558322] software IO TLB [mem 0xb3f55000-0xb7f55000] (64MB) mapped at [ffff8800b3f55000-ffff8800b7f54fff]
[    0.558653] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.558686] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    0.558693] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    0.558702] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    0.558711] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    0.558718] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[    0.558726] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[    0.558733] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[    0.558741] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[    0.558784] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.559056] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.559123] audit: initializing netlink subsys (disabled)
[    0.559138] audit: type=2000 audit(1409403401.548:1): initialized
[    0.572991] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.573218] VFS: Disk quotas dquot_6.5.2
[    0.573243] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.573297] msgmni has been set to 15721
[    0.573568] alg: No test for stdrng (krng)
[    0.573594] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.573641] io scheduler noop registered
[    0.573642] io scheduler deadline registered
[    0.573667] io scheduler cfq registered (default)
[    0.573813] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.574090] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.574102] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.574132] intel_idle: MWAIT substates: 0x21120
[    0.574133] intel_idle: v0.4 model 0x3A
[    0.574134] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.574424] GHES: HEST is not enabled!
[    0.574473] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.574884] Linux agpgart interface v0.103
[    0.574985] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.577773] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.577777] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.577885] mousedev: PS/2 mouse device common for all mice
[    0.577923] rtc_cmos 00:04: RTC can wake from S4
[    0.578052] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.578080] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.578088] Intel P-state driver initializing.
[    0.578095] Intel pstate controlling: cpu 0
[    0.578110] Intel pstate controlling: cpu 1
[    0.578127] Intel pstate controlling: cpu 2
[    0.578138] Intel pstate controlling: cpu 3
[    0.578150] Intel pstate controlling: cpu 4
[    0.578161] Intel pstate controlling: cpu 5
[    0.578173] Intel pstate controlling: cpu 6
[    0.578184] Intel pstate controlling: cpu 7
[    0.578205] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.578206] AMD IOMMUv2 functionality not available on this system
[    0.578303] TCP: cubic registered
[    0.578430] NET: Registered protocol family 10
[    0.578692] mip6: Mobile IPv6
[    0.578694] NET: Registered protocol family 17
[    0.578696] mpls_gso: MPLS GSO support
[    0.579002] registered taskstats version 1
[    0.579497] rtc_cmos 00:04: setting system clock to 2014-08-30 12:56:41 UTC (1409403401)
[    0.579562] PM: Hibernation image not present or could not be loaded.
[    0.580105] Freeing unused kernel memory: 1004K (ffffffff818b1000 - ffffffff819ac000)
[    0.580106] Write protecting the kernel read-only data: 8192k
[    0.582022] Freeing unused kernel memory: 1032K (ffff8800014fe000 - ffff880001600000)
[    0.582733] Freeing unused kernel memory: 364K (ffff8800017a5000 - ffff880001800000)
[    0.584062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.707741] udevd[91]: starting version 175
[    0.733032] ACPI: bus type USB registered
[    0.733078] usbcore: registered new interface driver usbfs
[    0.733096] usbcore: registered new interface driver hub
[    0.737112] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.737126] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.738456] usbcore: registered new device driver usb
[    0.739532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.739976] ehci-pci: EHCI PCI platform driver
[    0.740128] SCSI subsystem initialized
[    0.741650] libata version 3.00 loaded.
[    0.743532] AVX version of gcm_enc/dec engaged.
[    0.745847] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    0.747086] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[    0.747159] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.747170] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.747289] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.747315] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[    0.747327] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc90004c8e000, 5c:f9:dd:5a:75:61, XID 00c00000 IRQ 41
[    0.747367] thermal LNXTHERM:00: registered as thermal_zone0
[    0.747370] ACPI: Thermal Zone [TZ00] (38 C)
[    0.747426] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.747429] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.747432] usb usb1: Product: xHCI Host Controller
[    0.747434] usb usb1: Manufacturer: Linux 3.14-kali1-amd64 xhci_hcd
[    0.747437] usb usb1: SerialNumber: 0000:00:14.0
[    0.747839] hub 1-0:1.0: USB hub found
[    0.747857] hub 1-0:1.0: 4 ports detected
[    0.747922] thermal LNXTHERM:01: registered as thermal_zone1
[    0.747925] ACPI: Thermal Zone [TZ01] (38 C)
[    0.748404] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.748410] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.748479] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.748483] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.748485] usb usb2: Product: xHCI Host Controller
[    0.748488] usb usb2: Manufacturer: Linux 3.14-kali1-amd64 xhci_hcd
[    0.748490] usb usb2: SerialNumber: 0000:00:14.0
[    0.748659] hub 2-0:1.0: USB hub found
[    0.748681] hub 2-0:1.0: 4 ports detected
[    0.749521] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.749531] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.749550] ehci-pci 0000:00:1a.0: debug port 2
[    0.750592] alg: No test for crc32 (crc32-pclmul)
[    0.753457] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.753476] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf161a000
[    0.762693] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.762882] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.762885] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.762887] usb usb3: Product: EHCI Host Controller
[    0.762889] usb usb3: Manufacturer: Linux 3.14-kali1-amd64 ehci_hcd
[    0.762891] usb usb3: SerialNumber: 0000:00:1a.0
[    0.763067] hub 3-0:1.0: USB hub found
[    0.763074] hub 3-0:1.0: 2 ports detected
[    0.763308] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.763313] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.763327] ehci-pci 0000:00:1d.0: debug port 2
[    0.767227] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.767242] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1619000
[    0.778734] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.778796] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.778800] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.778803] usb usb4: Product: EHCI Host Controller
[    0.778806] usb usb4: Manufacturer: Linux 3.14-kali1-amd64 ehci_hcd
[    0.778809] usb usb4: SerialNumber: 0000:00:1d.0
[    0.779113] hub 4-0:1.0: USB hub found
[    0.779121] hub 4-0:1.0: 2 ports detected
[    0.779330] ahci 0000:00:1f.2: version 3.0
[    0.779489] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    0.794744] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xa impl SATA mode
[    0.794751] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.803961] scsi0 : ahci
[    0.804487] scsi1 : ahci
[    0.804867] scsi2 : ahci
[    0.805110] scsi3 : ahci
[    0.805532] scsi4 : ahci
[    0.805887] scsi5 : ahci
[    0.805968] ata1: DUMMY
[    0.805974] ata2: SATA max UDMA/133 abar m2048@0xf1618000 port 0xf1618180 irq 43
[    0.805976] ata3: DUMMY
[    0.805980] ata4: SATA max UDMA/133 abar m2048@0xf1618000 port 0xf1618280 irq 43
[    0.805981] ata5: DUMMY
[    0.805983] ata6: DUMMY
[    1.059006] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.123010] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.123041] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.129488] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20003, max UDMA/133
[    1.129494] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.135986] ata2.00: configured for UDMA/133
[    1.136302] scsi 1:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2AR2 PQ: 0 ANSI: 5
[    1.138387] ata4.00: ATAPI: MATSHITA DVD+/-RW UJ8D1, D.02, max UDMA/100
[    1.151626] ata4.00: configured for UDMA/100
[    1.158177] scsi 3:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ8D1    D.02 PQ: 0 ANSI: 5
[    1.164318] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.164373] sd 1:0:0:0: [sda] Write Protect is off
[    1.164377] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.164399] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.176149] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.176154] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.176418] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.179143] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.179287] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.188419] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    1.188425] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.188428] usb 1-1: Product: USB2.0 Hub
[    1.189108] hub 1-1:1.0: USB hub found
[    1.189401] hub 1-1:1.0: 4 ports detected
[    1.236851]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
[    1.238440] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.303208] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.434004] usb 1-4: New USB device found, idVendor=046d, idProduct=c52b
[    1.434011] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.434014] usb 1-4: Product: USB Receiver
[    1.434017] usb 1-4: Manufacturer: Logitech
[    1.438371] hidraw: raw HID events driver (C) Jiri Kosina
[    1.442597] usbcore: registered new interface driver usbhid
[    1.442600] usbhid: USB HID core driver
[    1.446384] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[    1.501728] input: Logitech Unifying Device. Wireless PID:4008 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input2
[    1.501969] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4008] on usb-0000:00:14.0-4:2
[    1.503794] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input3
[    1.503981] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-4:1
[    1.543378] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.555350] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[    1.675882] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    1.675887] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.676287] hub 3-1:1.0: USB hub found
[    1.676447] hub 3-1:1.0: 6 ports detected
[    1.787644] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.920010] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.920015] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.920311] hub 4-1:1.0: USB hub found
[    1.920382] hub 4-1:1.0: 8 ports detected
[    1.991865] usb 3-1.3: new high-speed USB device number 3 using ehci-pci
[    2.084648] usb 3-1.3: New USB device found, idVendor=0bda, idProduct=0129
[    2.084654] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.084658] usb 3-1.3: Product: USB2.0-CRW
[    2.084660] usb 3-1.3: Manufacturer: Generic
[    2.084663] usb 3-1.3: SerialNumber: 20100201396000000
[    2.156030] usb 3-1.5: new high-speed USB device number 4 using ehci-pci
[    2.317142] usb 3-1.5: New USB device found, idVendor=064e, idProduct=8126
[    2.317148] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.317151] usb 3-1.5: Product: Laptop_Integrated_Webcam_HD
[    2.317154] usb 3-1.5: Manufacturer: SuYin
[    2.396206] usb 4-1.5: new full-speed USB device number 3 using ehci-pci
[    2.475502] random: nonblocking pool is initialized
[    2.492535] usb 4-1.5: New USB device found, idVendor=8087, idProduct=07da
[    2.492541] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.556388] Switched to clocksource tsc
[    2.665441] platform microcode: firmware: direct-loading firmware intel-ucode/06-3a-09
[    2.665499] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    2.666698] microcode: CPU0 updated to revision 0x1b, date = 2014-05-29
[    2.666719] platform microcode: firmware: direct-loading firmware intel-ucode/06-3a-09
[    2.666744] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    2.667459] microcode: CPU1 updated to revision 0x1b, date = 2014-05-29
[    2.667478] platform microcode: firmware: direct-loading firmware intel-ucode/06-3a-09
[    2.667501] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    2.668230] microcode: CPU2 updated to revision 0x1b, date = 2014-05-29
[    2.668257] platform microcode: firmware: direct-loading firmware intel-ucode/06-3a-09
[    2.668283] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    2.668993] microcode: CPU3 updated to revision 0x1b, date = 2014-05-29
[    2.669019] platform microcode: firmware: direct-loading firmware intel-ucode/06-3a-09
[    2.669066] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[    2.669774] microcode: CPU4 updated to revision 0x1b, date = 2014-05-29
[    2.669792] platform microcode: firmware: direct-loading firmware intel-ucode/06-3a-09
[    2.669840] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[    2.670548] microcode: CPU5 updated to revision 0x1b, date = 2014-05-29
[    2.670566] platform microcode: firmware: direct-loading firmware intel-ucode/06-3a-09
[    2.670611] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[    2.671319] microcode: CPU6 updated to revision 0x1b, date = 2014-05-29
[    2.671337] platform microcode: firmware: direct-loading firmware intel-ucode/06-3a-09
[    2.671390] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[    2.672097] microcode: CPU7 updated to revision 0x1b, date = 2014-05-29
[    2.680171] device-mapper: uevent: version 1.0.3
[    2.680268] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.694078] PM: Starting manual resume from disk
[    2.694084] PM: Hibernation image partition 8:11 present
[    2.694086] PM: Looking for hibernation image.
[    2.694286] PM: Image not found (code -22)
[    2.694290] PM: Hibernation image not present or could not be loaded.
[    2.745208] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[    4.476408] udevd[504]: starting version 175
[    4.759136] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    4.759143] ACPI: Power Button [PWRB]
[    4.759217] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[    4.759221] ACPI: Sleep Button [SLPB]
[    4.759378] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[    4.759668] ACPI: Lid Switch [LID0]
[    4.759764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    4.759769] ACPI: Power Button [PWRF]
[    4.765673] ACPI: Battery Slot [BAT0] (battery present)
[    4.966322] ACPI: AC Adapter [ADP0] (on-line)
[    5.135062] wmi: Mapper loaded
[    5.520417] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[    5.520428] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.569755] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    5.640910] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    5.701094] cfg80211: Calling CRDA to update world regulatory domain
[    5.732808] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[    5.784596] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    5.784600] Copyright(c) 2003- 2014 Intel Corporation
[    5.784857] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.785021] iwlwifi 0000:02:00.0: irq 45 for MSI/MSI-X
[    5.840509] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[    5.865807] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    5.865944] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    5.866058] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    5.871746] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258)
[    5.871761] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.871769] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[    5.871778] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[    5.871786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.871789] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[    5.871796] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[    5.871804] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.871806] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.878700] input: Dell WMI hotkeys as /devices/virtual/input/input13
[    5.922150] Bluetooth: Core ver 2.18
[    5.922175] NET: Registered protocol family 31
[    5.922178] Bluetooth: HCI device and connection manager initialized
[    5.922187] Bluetooth: HCI socket layer initialized
[    5.922191] Bluetooth: L2CAP socket layer initialized
[    5.922203] Bluetooth: SCO socket layer initialized
[    5.954207] usbcore: registered new interface driver btusb
[    5.964651] [drm] Initialized drm 1.1.0 20060810
[    5.966955] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-2030-6.ucode
[    5.967222] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    5.975833] iTCO_vendor_support: vendor-support=0
[    6.089612] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    6.089670] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    6.089893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.355949] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    6.355956] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    6.355959] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    6.355962] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[    6.356060] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    6.417321] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    6.604545] [drm] Memory usable by graphics device = 2048M
[    6.675882] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    6.675903] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.675905] [drm] Driver supports precise vblank timestamp query.
[    6.676174] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[    6.709686] media: Linux media interface: v0.10
[    6.719226] Linux video capture interface: v2.00
[    6.728293] fbcon: inteldrmfb (fb0) is primary device
[    6.830874] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input14
[    6.846308] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input12
[    6.849699] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    6.854150] scsi6 : SCSI emulation for RTS5139 USB card reader
[    6.854354] usbcore: registered new interface driver rts5139
[    6.854428] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    6.855258] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    7.033186] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    7.462485] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (064e:8126)
[    7.487213] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input15
[    7.487415] usbcore: registered new interface driver uvcvideo
[    7.487416] USB Video Class driver (1.1.1)
[    7.497724] Console: switching to colour frame buffer device 240x67
[    7.506651] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.506654] i915 0000:00:02.0: registered panic notifier
[    7.507012] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    7.507078] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    7.634847] cfg80211: World regulatory domain updated:
[    7.634851] cfg80211:  DFS Master region: unset
[    7.634852] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.634855] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    7.634857] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    7.634859] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    7.634861] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    7.634863] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    7.634865] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    7.759233] acpi device:35: registered as cooling_device9
[    7.759268] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:31/LNXVIDEO:00/input/input16
[    7.789910] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.790490] acpi device:38: registered as cooling_device10
[    7.790656] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input17
[    7.790897] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    7.809021] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   10.856355] Adding 3364860k swap on /dev/sda11.  Priority:-1 extents:1 across:3364860k 
[   10.876372] EXT4-fs (sda10): re-mounted. Opts: (null)
[   11.243534] EXT4-fs (sda10): re-mounted. Opts: errors=remount-ro
[   11.569964] loop: module loaded
[   15.308116] bbswitch: version 0.8
[   15.308131] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   15.308141] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   15.308162] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   15.308614] bbswitch: detected an Optimus _DSM function
[   15.308634] pci 0000:01:00.0: enabling device (0006 -> 0007)
[   15.308700] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   15.312734] bbswitch: disabling discrete graphics
[   15.312756] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   15.322350] Netfilter messages via NETLINK v0.30.
[   18.322619] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   18.330220] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[   18.573734] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   18.581311] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[   18.655599] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.735353] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8105e-1.fw
[   18.929248] r8169 0000:03:00.0 eth0: link down
[   18.929300] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.162369] wlan0: authenticate with c0:4a:00:49:59:3c
[   20.166590] wlan0: send auth to c0:4a:00:49:59:3c (try 1/3)
[   20.168982] wlan0: authenticated
[   20.171180] wlan0: associate with c0:4a:00:49:59:3c (try 1/3)
[   20.183147] wlan0: RX AssocResp from c0:4a:00:49:59:3c (capab=0x431 status=0 aid=3)
[   20.214400] wlan0: associated
[   20.214515] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
root@kali:~#

8

Я если честно в этом ничего не понимаю ((((

9

https://forums.kali.org/showthread.php? … l-problems
Поскольку Kali совместим с Debian, я бы попытался установить из debian-backports актуальное ядро и bumblebee.

Истинный hotplug - это обычная электрическая розетка: воткнул - работает, и никаких драйверов.
Slackware64-current/Xfce/Lenovo G580

10 (31.08.2014 22:19:26 отредактировано AntiduPb)

den54 пишет:

Я если честно в этом ничего не понимаю ((((

А зачем вам тогда сразу Kali? Поставьте Debian.

Конечно, это работает в Gentoo!

11

kali нужен чтоб на работе сетку протестировать, фирма маленькая поэтому все своими силами)) да и просто интересно разобраться и научиться

12

yars пишет:

https://forums.kali.org/showthread.php? … l-problems
Поскольку Kali совместим с Debian, я бы попытался установить из debian-backports актуальное ядро и bumblebee.

Расскажите пожалуйста как установить ядро?? bumblebee я как раз из debian ставил

13

Все. Вопрос по драйверам снимается, вроде поставил , теперь вопрос как pyrit-cuda собрать, чтоб он видео карту увидел !!!!?????

14

AntiduPb пишет:

А зачем вам тогда сразу Kali? Поставьте Debian.

den54 пишет:

kali нужен чтоб на работе сетку протестировать, фирма маленькая поэтому все своими силами)) да и просто интересно разобраться и научиться

А зачем вам тогда сразу Kali? Поставьте Debian.

Карусель разнесло по цепочке за час
Всех известий — конец
Да, весна началась!
(всё к лицу подлецу, как родному отцу, не рассказывай, батя, и так всё пройдёт)

15

den54 пишет:

Все. Вопрос по драйверам снимается, вроде поставил , теперь вопрос как pyrit-cuda собрать, чтоб он видео карту увидел !!!!?????

нагуглил: http://www.blackmoreops.com/2014/03/13/ … ali-linux/

Карусель разнесло по цепочке за час
Всех известий — конец
Да, весна началась!
(всё к лицу подлецу, как родному отцу, не рассказывай, батя, и так всё пройдёт)

16

drBatty пишет:
den54 пишет:

Все. Вопрос по драйверам снимается, вроде поставил , теперь вопрос как pyrit-cuda собрать, чтоб он видео карту увидел !!!!?????

нагуглил: http://www.blackmoreops.com/2014/03/13/ … ali-linux/

OK спасибо дома попробую ))

17

den54 пишет:

kali нужен чтоб на работе сетку протестировать, фирма маленькая поэтому все своими силами)) да и просто интересно разобраться и научиться

Согласен с Доком: поставьте Debian и из его репозитория установите нужные инструменты (ну там Wireshark или еще что)