31 (24.05.2014 15:29:04 отредактировано overlayer)

Я бы добавил еще пару полезных советов:

  • не устанавливать GRUB2 и Pulseaudio при инсталляции системы.

Экономит время и нервы))

Ах да, естественно это подойдет не всем.

32

overlayer пишет:

Я бы добавил еще пару полезных советов:

  • не устанавливать GRUB2 и Pulseaudio при инсталляции системы.

Экономит время и нервы))

не заметил с этим никаких проблем...

33 (26.05.2014 10:48:14 отредактировано basileus)

mozgfx пишет:

О каком пакете идет речь?

Об этом пакете: cyrconfix. На данный момент в ветке идет обсуждение именно фикса №7 с данным пакетом. И, судя по ссылке, он находится на внешнем сайте, не связанным с OpenSUSE. А логичнее было бы разместить его уже в составе дистрибутива.
З.Ы. Кстати, а что с остальными языками? Мне они не критичны, потому как я знаю русский, ну и "английский со словарём" так сказать, и всё. Сможет данный пакет поправить все квадратики независимо от языка (вангую, что, например, с белорусским, украинским, казахским или любым другим, не относящимся полностью или частично к латинской группе,та же беда)? Или он вносит только частные правки?

SimplyMepis ->OpenSUSE->Mandriva->OpenSUSE

34

basileus пишет:

Сможет данный пакет поправить все квадратики независимо от языка (вангую, что, например, с белорусским, украинским, казахским или любым другим, не относящимся полностью или частично к латинской группе,та же беда)?

Да, сможет.

35

urfin пишет:

Да, сможет.

Ну раз так, то почему он не в основных репозиториях?

SimplyMepis ->OpenSUSE->Mandriva->OpenSUSE

36

basileus, это вопрос к дистростроителям, у них, видать, свои резоны.

37

Не получается применить совет №17. Хочется, чтобы всегда оставалось два последних ядра, но старые ядра не удаляются. Куда копать?

openSUSE 13.2 x64, KDE 4.14 | AMD Phenom II X2 550 Black Edition | ASUS M4A785TD-M EVO | RAM DDR3 8 GB | ASUS Radeon HD 6770
openSUSE 13.2 x64, KDE 4.14 | Samsung 300V4A

38

Quarck,
Совет 17 не для этого.


Покажите:

 Консоль:
cat /etc/zypp/zypp.conf
systemctl status purge-kernels.service

39

cat /etc/zypp/zypp.conf

## Configuration file for software management
## /etc/zypp/zypp.conf
##
## Boolean values are 0 1 yes no on off true false


[main]


##
## Override the detected architecture
##
## Valid values:  i586, i686, x86_64, ppc, ppc64, ia64, s390, s390x, ..
## Default value: Autodetected
##
## ** CAUTION: Only set if you know what you're doing !
## ** Changing this needs a full refresh (incl. download)
## ** of all repository data.
##
# arch = s390


##
## Path where the caches are kept.
##
## Valid values: A directory
## Default value: /var/cache/zypp
##
# cachedir = /var/cache/zypp


##
## Path where the repo metadata is downloaded and kept.
##
## Valid values: A directory
## Default value: {cachedir}/raw
##
## Changing this needs a full refresh (incl. download) of all repository data
##
# metadatadir = /var/cache/zypp/raw


##
## Path where the repo solv files are created and kept.
##
## Valid values: A directory
## Default value: {cachedir}/solv
##
# solvfilesdir = /var/cache/zypp/solv


##
## Path where the repo packages are downloaded and kept.
##
## Valid values: A directory
## Default value: {cachedir}/packages
##
# packagesdir = /var/cache/zypp/packages


##
## Path where the configuration files are kept.
##
## Valid values: A directory
## Default value: /etc/zypp
##
# configdir = /etc/zypp

##
## Path where the known repositories .repo files are kept
##
## Valid values: A directory
## Default value: {configdir}/repos.d
##
## Changing this invalidates all known repositories
##
# reposdir = /etc/zypp/repos.d

##
## Path where the known services .service files are kept
##
## Valid values: A directory
## Default value: {configdir}/services.d
##
## Changing this invalidates all known services
##
# servicesdir = /etc/zypp/services.d


##
## Whether repository urls should be probed when added
##
## Valid values: boolean
## Default value: false
##
## If true, accessability of repositories is checked immediately (when added)
##   (e.g. 'zypper ar' will check immediately)
## If false, accessability of repositories is checked when refreshed
##   (e.g. 'zypper ar' will delay the check until the next refresh)
##
# repo.add.probe = false


##
## Amount of time in minutes that must pass before another refresh.
##
## Valid values: Integer
## Default value: 10
##
## If you have autorefresh enabled for a repository, it is checked for
## up-to-date metadata not more often than every <repo.refresh.delay>
## minutes. If an automatic request for refresh comes before <repo.refresh.delay>
## minutes passed since the last check, the request is ignored.
##
## A value of 0 means the repository will always be checked. To get the oposite
## effect, disable autorefresh for your repositories.
##
## This option has no effect for repositories with autorefresh disabled, nor for
## user-requested refresh.
##
# repo.refresh.delay = 10

##
## Translated package descriptions to download from repos.
##
## A list of locales for which translated package descriptions should
## be downloaded, in case they are availavble and the repo supports this.
## Not all repo formats support downloading specific translations only.
##
## Valid values:  List of locales like 'en', 'en_US'...
## Default value: RequestedLocales
##
## If data for a specific locale are not available, we try to find some
## fallback. Translations for 'en' are always downloaded.
##
# repo.refresh.locales = en, de

##
## Maximum number of concurrent connections to use per transfer
##
## Valid values: Integer
## Default value: 5
##
## This setting is only used if more than one is possible
## Setting it to a reasonable number avoids flooding servers
##
# download.max_concurrent_connections = 5

##
## Sets the minimum download speed (bytes per second)
## until the connection is dropped
## This can be useful to prevent security attacks on hosts by
## providing updates at very low speeds.
##
## 0 means no limit
##
# download.min_download_speed = 0

## Maximum download speed (bytes per second)
## 0 means no limit
# download.max_download_speed = 0

## Number of tries per download which will be
## done without user interaction
## 0 means no limit (use with caution)
# download.max_silent_tries = 5

##
## Maximum time in seconds that you allow a transfer operation to take.
##
## This is useful for preventing your batch jobs from hanging for hours due
## to slow networks or links going down. Limiting operations to less than a
## few minutes risk aborting perfectly normal operations.
##
## Valid values:  [0,3600]
## Default value: 180
##
# download.transfer_timeout = 180

##
## Whether to consider using a .delta.rpm when downloading a package
##
## Valid values: boolean
## Default value: true
##
## Using a delta rpm will decrease the download size for package updates
## since it does not contain all files of the package but only the binary
## diff of changed ones. Recreating the rpm package on the local machine
## is an expensive operation (memory,CPU). If your network connection is
## not too slow, you benefit from disabling .delta.rpm.
##
# download.use_deltarpm = true

##
## Whether to consider using a deltarpm even when rpm is local
##
## Valid values: boolean
## Default value: false
##
## This option has no effect unless download.use_deltarpm is set true.
##
#  download.use_deltarpm.always = false

##
## Hint which media to prefer when installing packages (download vs. CD).
##
## Valid values:        download, volatile
## Default value:       download
##
## Note that this just a hint. First of all the solver will choose the 'best'
## package according to its repos priority, version and architecture. But if
## there is a choice, we will prefer packages from the desired media.
##
## Packages available locally are always preferred. The question is whether
## you prefer packages being downloaded via FTP/HTTP/HTTPS (download), rather
## than being prompted to insert a CD/DVD (volatile), in case they are available
## on both media.
##
##   Name             | Priority | URI
##   openSUSE-11.1      99         dvd:///
##   openSUSE-11.1-Oss  99         [url]http://download.opensuse.org/distribution/11.1/repo/oss[/url]
##
## In the above example 2 repositories with similar content are used. Rather
## than raising the priority of one of them to 'prefer' a certain media, you
## should use the same priority for both and set download.media_preference
## instead.
##
## download.media_preference = download

##
## Commit download policy to use as default.
##
##  DownloadOnly,       Just download all packages to the local cache.
##                      Do not install. Implies a dry-run.
##
##  DownloadInAdvance,  First download all packages to the local cache.
##                      Then start to install.
##
##  DownloadInHeaps,    Similar to DownloadInAdvance, but try to split
##                      the transaction into heaps, where at the end of
##                      each heap a consistent system state is reached.
##
##  DownloadAsNeeded    Alternating download and install. Packages are
##                      cached just to avid CD/DVD hopping. This is the
##                      traditional behaviour.
##
##  <UNSET>             If a value is not set, empty or unknown, we pick
##                      some sane default.
##
## commit.downloadMode =

##
## Defining directory which contains vendor description files.
##
## One file in this directory reflects a group of equivalent vendors. e.G.:
## (filename is "nvidia" but could be any other name):
## ------------------------- file contains begin -----------------------
## [main]
##
## vendors = nvidia,suse,opensuse
##
## ------------------------- file contains end -----------------------
## Libzypp makes an string comparision (like strncmp, case-insensitive)
## whereas the beginning of the strings are compared only.
## e.G. vendor "opensuse11.0" is compatible to "openSuSE".
##
## Valid values: A directory
## Default value: {configdir}/vendors.d
##
# vendordir = /etc/zypp/vendors.d


##
## Whether required packages are installed ONLY
## So recommended packages, language packages and packages which depend
## on hardware (modalias) will not be regarded.
##
## Valid values: boolean
## Default value: false
##
# solver.onlyRequires = false

##
## EXPERTS ONLY: Per default the solver will not replace packages of
## different vendors, unless you explicitly ask to do so. Setting this
## option to TRUE will disable this vendor check (unless the application
## explicitly re-enables it). Packages will then be considered based on
## repository priority and version only. This may easily damage your system.
##
## CHANGING THE DEFAULT IS NOT RECOMMENDED.
##
## Valid values:  boolean
## Default value: false
##
# solver.allowVendorChange = false

##
## EXPERTS ONLY: Cleanup when deleting packages. Whether the solver should
## per default try to remove packages exclusively required by the ones he's
## asked to delete.
##
## This option should be used on a case by case basis, enabled via
## command line options or switches the applications offer. Changing
## the global default on a system where unattended actions are performed,
## may easily damage your system.
##
## CHANGING THE DEFAULT IS NOT RECOMMENDED.
##
## Valid values:  boolean
## Default value: false
##
# solver.cleandepsOnRemove = false

##
## This file contains requirements/conflicts which fulfill the
## needs of a running system.
## For example the system would be broken if not glibc or kernel is
## installed.
## So the user will be informed if these packages will be deleted.
##
## Format: Each line represents one dependency:
##         e.g.
##         requires:kernel
##         requires:glibc
## Default value: {configdir}/systemCheck
##
# solver.checkSystemFile = /etc/zypp/systemCheck

##
## When committing a dist upgrade (e.g. 'zypper dup') a solver testcase
## is written to /var/log/updateTestcase-<date>. It is needed in bugreports.
## This option returns the number of testcases to keep on the system. Old
## cases will be deleted, as new ones are created.
##
## Use 0 to write no testcase at all, or -1 to keep all testcases.
##
## Valid values:        Integer
## Default value:       2
##
# solver.upgradeTestcasesToKeep = 2

##
## Whether dist upgrade should remove a products dropped packages.
##
## A new product may suggest a list of old and no longer supported
## packages (dropped packages). Performing a dist upgrade the solver
## may try to delete them, even if they do not cause any dependency
## problem.
##
## Turning this option off, the solver will not try to remove those
## packages unless they actually do cause dependency trouble. You may
## do the cleanup manually, or simply leave them installed as long
## as you don't need the disk space.
##
## Valid values:        Boolean
## Default value:       true
##
# solver.upgradeRemoveDroppedPackages = true

##
## Packages which can be installed in different versions at the same time.
##
## Packages are selected either by name, or by provides. In the later case
## the string must start with "provides:" immediately followed by the capability.
##
## Example:
##      kernel                          - just packages whith name 'kernel'
##      provides:multiversion(kernel)   - all packages providing 'multiversion(kernel)'
##                                        (kenel and kmp packages should do this)
## Valid values:
##      Comma separated list of packages.
##
## Default value:
##      empty
##
#multiversion = provides:multiversion(kernel)

##
## Defining directory which may contain additional multiversion definitions.
##
## If the directory exists, each file in this directory is scanned, expecting
## one valid multiversion list entry per line. Empty lines and lines starting
## with '#' are ignored.
## ------------------------- [/etc/zypp/multiversion.d/example file begin] -----------------------
## # An alternate way to enable kernel packages being
## # installed in parallel:
##
## provides:multiversion(kernel)
## ------------------------- [/etc/zypp/multiversion.d/example file end] -----------------------
##
## Valid values: A directory
## Default value: {configdir}/multiversion.d
##
# multiversiondir = /etc/zypp/multiversion.d

## Comma separated list of kernel packages to keep installed in parallel, if the
## above multiversion variable is set. Packages can be specified as
## 2.6.32.12-0.7 - Exact version to keep
## latest        - Keep kernel with the highest version number
## latest-N      - Keep kernel with the Nth highest version number
## running       - Keep the running kernel
## oldest        - Keep kernel with the lowest version number (the GA kernel)
## oldest+N      - Keep kernel with the Nth lowest version number
##
## Note: This entry is not evaluated by libzypp, but by the
##       purge-kernels service (via /sbin/purge-kernels).
##
## Default: Do not delete any kernels if multiversion = provides:multiversion(kernel) is set
multiversion.kernels = latest,latest-1,running

##
## Path to locks file. If not exist then is create.
## In this file is saved also UI locks.
##
## valid value: path to file or place where file can be created
## default value: {configdir}/locks
##
# locksfile.path = /etc/zypp/locks

##
## Whether to apply locks in locks file after zypp start.
##
## Valid values: boolean
## Default value: true
##
# locksfile.apply = true

##
## Where update items are stored
## (example: scripts, messages)
##
## Valid values: path to directory
## Default value: /var/adm
##
# update.datadir = /var/adm

##
## Where update messages are stored
##
## Valid values: path to directory
## Default value: {update.datadir}/update-messages
##
# update.messagesdir = /var/adm/update-messages

##
## Where update scripts are stored
##
## Valid values: path to directory
## Default value: {update.datadir}/update-scripts
##
# update.scriptsdir = /var/adm/update-scripts

##
## Command to be invoked to send update messages.
##
## Packages may leave an update message file in {update.messagesdir}.
## At the end of each commit, zypp collects those messages and may send
## a notification to the user.
##
## zypp will prepare the update messages according to the selected
## content format and pipe the content to the command.
##
## Format:
##     single - For each update message invoke the command and send
##              the message.
##     none   - For each update message invoke the command but don't
##              use a pipe to send any data. You probably want to pass
##              the message file on the commandline using %P (see
##              Substitutions).
##     digest - Single invocation of the command, sending the path
##              names of all update message. One per line.
##     bulk   - Single invocation of the command, sending the
##              concatenated content of all update messages, separated
##              by Ctrl-L.
##
## Substitutions:
##     %p     - package identification (name-version-release.arch)
##     %P     - full path to the update message file
##
## Valid values: The value is specified as "format | command".
##               An empty value will turn off any notification.
##
## Examples:     single | mail -s 'Update message from %p' root
##               none   | my-send-script -f %P
##
## Default value: single | /usr/lib/zypp/notify-message -p %p
##
# update.messages.notify = single | /usr/lib/zypp/notify-message -p %p

##
## Options for package installation: excludedocs
##
## Don't install any files which are marked as documentation.
##
## Valid values:  boolean
## Default value: no
##
# rpm.install.excludedocs = no

##
## Location of history log file.
##
## The history log is described at
## [url]http://en.opensuse.org/Libzypp/Package_History[/url]
##
## Valid values: absolute path to a file
## Default value: /var/log/zypp/history
##
# history.logfile = /var/log/zypp/history

##
## Global credentials directory path.
##
## If a URL contains ?credentials=<filename> parameter, the credentials will
## be stored and looked for in a file named <filename> in this directory.
##
## Valid values: absolute path to a directory
## Default value: /etc/zypp/credentials.d
##
# credentials.global.dir = /etc/zypp/credentials.d

##
## Global credentials catalog file path.
##
## This file contains a catalog of all known user credentials which were
## not stored via the ?credentials=<filename> URL parameter, i.e. passed
## in URL as username:password component, or entered by user in
## an authentication dialog.
##
## Valid values: absolute path to a file
## Default value: /etc/zypp/credentials.cat
##
# credentials.global.file = /etc/zypp/credentials.cat

systemctl status purge-kernels.service

 Консоль:
purge-kernels.service - Purge old kernels
   Loaded: loaded (/usr/lib/systemd/system/purge-kernels.service; enabled)
   Active: inactive (dead)
           start condition failed at Чт 2014-07-24 17:47:24 KRAT; 19min ago
           ConditionPathExists=/boot/do_purge_kernels was not met

openSUSE 13.2 x64, KDE 4.14 | AMD Phenom II X2 550 Black Edition | ASUS M4A785TD-M EVO | RAM DDR3 8 GB | ASUS Radeon HD 6770
openSUSE 13.2 x64, KDE 4.14 | Samsung 300V4A

40

Quarck,
Пробуйте:
Раскомментируйте строку:

#multiversion = provides:multiversion(kernel)

так:

multiversion = provides:multiversion(kernel)

Запустите:

 Консоль: root
[root@linuxforum.ru ~]# systemctl start purge-kernels.service

После успешного обновления ядра и последующей перезагрузки будет оставаться новое и предыдущее ядро.


з.ы. лишние ядра можно удалить вручную, а нужные оставить

41

Заменил в совете №6 репозиторий home:/namtrac:/subpixel на home:/Quodex:/subpixel.
Содержимое одинаковое.

з.ы. в home:/namtrac:/subpixel по непонятной причине удалены 32бит пакеты.


UPD:
з.з.ы вернул home:/namtrac:/subpixel на место

42 (07.09.2014 13:18:21 отредактировано zakirovnadim)

После перехода на SUSE столкнулся с проблемой не работы любимого плеера. Решение все таки нашел, но нервы потратил.

Добавьте еще один совет для новичков. Если не работают VLC плеер, то надо просто установить кодеки:
http://www.opensuse-guide.org/codecs.php
Если во время установки будут выскакивать предупреждения, то в них просто выбираешь первый пункт и продолжаешь установку.

Почему то в родной репе ничего нет - сам VLC есть, а кодеков к нему нема. Да и кстати, сам VLC лучше ставить с официального сайта, предварительно поставив кодеки.
http://www.videolan.org/vlc/download-suse.html

--openSUSE 13.1


P.S. И еще, если не трудно подскажите кто нибудь как вернуть русский язык в загрузчике? Сразу после установки все было отлично, но после обновления системы пункт "Дополнительные параметры..." стал высвечиваться на английском.

43

zakirovnadim, из pacman все работает. Уже обсуждалось.

44

zakirovnadim пишет:

Добавьте еще один совет для новичков. Если не работают VLC плеер, то надо просто установить кодеки:

Тема про кодеки: Установка мультимедиа кодеков, плагинов и поддержки DVD в openSUSE
Репозиторий VLC и packman вместе лучше не подключать.

zakirovnadim пишет:

P.S. И еще, если не трудно подскажите кто нибудь как вернуть русский язык в загрузчике? Сразу после установки все было отлично, но после обновления системы пункт "Дополнительные параметры..." стал высвечиваться на английском.

Это глюк.
Выполняйте каждый раз, когда снова станет на английском:

 Консоль: root
[root@linuxforum.ru ~]# grub2-mkconfig -o /boot/grub2/grub.cfg

45

За совет спасибо, попробую. А на счет реп, так я уже подключил их вместе. Пока полет нормальный, вы уверены что videolan лучше убрать? Я на SUSE всего неделю сижу и можно сказать полный нуб.

46

zakirovnadim пишет:

videolan лучше убрать?

Лучше или нет, решайте сами. Но videolan + packman одновременно могут дать совершенно неожиданные последствия при обновлении пакетов (на что, собственно, указал verg). У меня таким образом необратимо поломался vlc, причём даже после удаления videolan из списка репозиториев и удаления/повторной установки пакетов из packman лучше не стало (в большинстве случаев при попытке воспроизведения видеофайлов нет изображения, слышен только звук). Результат: пользуюсь umplayer (собственно, очень приятная программа, есть плюс по сравнению с vlc: при открытии файла воспроизведение возобновляется с места, где закрыли в прошлый раз).

openSUSE Leap 15.1

47

zakirovnadim пишет:

вы уверены что videolan лучше убрать?

Да. Позволит избежать некоторых проблем.
Плюс от него толку, как от козла молока, при имеющемся Packman.

48

По поводу репозитория /home:/namtrac:/subpixel/ из совета №6.
Там freetype обновлён до версии 2.5.3

Вопрос: Работает ли с этой версией галка в Firefox - "Разрешить веб-сайтам использовать свои шрифты вместо установленных"?

Сам пока не обновлялся.

з.ы. как-то ставил эту версию с другой репы, тогда эта галка не работала.

49

verg, Как дому буду - могу проверить, если надо.

50

baralgin пишет:

verg, Как дому буду - могу проверить, если надо.

Если не затруднит, конечно.

51

verg

 Консоль:
baralgin@baralgin-pc:~> rpm -qa | grep freetype
libfreetype6-32bit-2.5.3-102.1.x86_64
libfreetype6-2.5.3-102.1.x86_64

http://i67.fastpic.ru/thumb/2014/0922/43/054327e99fe24a8f3e99f36c61dca643.jpeg

52

baralgin,
Если поставить настройку: "без засечек" и открыть, например, этот сайт http://unixforum.org/
Как будут выглядеть шрифты на главной (если можно скриншот)

53

verghttp://i64.fastpic.ru/thumb/2014/0922/0e/fa2a5c98f27016e5649d3a567fe9e90e.jpeg

http://i63.fastpic.ru/thumb/2014/0922/c5/3e7bfb8bb30f0f015afa413f1f01c1c5.jpeg

54

baralgin,
То что нужно, спасибо за тест.

55

Для удобства навигации в шапку устаревших тем с полезными советами добавлена ссылка на Полезные советы для более новой версии.