<network>
  <name>net</name>
  <uuid>9d40881f-6763-b7b8-3b96-b50d064d1b62</uuid>
  <bridge name='virbr0' stp='on' delay='0' />
  <ip address='192.168.100.1' netmask='255.255.255.0'>
    <dhcp>
      <range start='192.168.100.128' end='192.168.100.254' />
    </dhcp>
  </ip>
</network>

<domain type='qemu'>
  <name>widows</name>
  <uuid>cee44e62-e2f6-90d3-0670-ef51ef97e9f9</uuid>
  <memory>524288</memory>
  <currentMemory>524288</currentMemory>
  <vcpu>1</vcpu>
  <os>
    <type arch='i686' machine='pc-0.12'>hvm</type>
    <boot dev='hd'/>
  </os>
  <features>
    <acpi/>
    <apic/>
    <pae/>
  </features>
  <clock offset='localtime'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/bin/qemu</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/mnt/vmxp.img'/>
      <target dev='hda' bus='ide'/>
      <address type='drive' controller='0' bus='0' unit='0'/>
    </disk>
    <controller type='ide' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <interface type='network'>
      <mac address='52:54:00:06:00:71'/>
      <source network='net'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <serial type='pty'>
      <target port='0'/>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <input type='tablet' bus='usb'/>
    <input type='mouse' bus='ps2'/>
    <graphics type='vnc' port='-1' autoport='yes'/>
    <sound model='ac97'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
    </sound>
    <video>
      <model type='vga' vram='9216' heads='1'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
    </video>
    <memballoon model='virtio'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
    </memballoon>
  </devices>
</domain>

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.107
netmask 255.255.255.0
gateway 192.168.0.1


auto bond0
iface bond0 inet manual
        up ifconfig bond0 0.0.0.0 up
        slaves eth1 eth2
auto vlan3
iface vlan3 inet manual
        vlan-raw-device bond0

auto vlan4
iface vlan4 inet manual
        vlan-raw-device bond0

auto vlan5
iface vlan5 inet manual
        vlan-raw-device bond0

auto br0
iface br0 inet dhcp
#address 192.168.0.99
#netmask 255.255.255.0

        #bridge_fd 9
        #bridge_hello 2
        #bridge_maxage 12
        #bridge_stp off
        pre-up brctl addbr br0
        pre-up brctl addif br0 bond0
        hwaddress ether 00:1c:f0:0e:86:d9
        post-down brctl delbr br0
        ifup br0

auto br1
iface br1 inet dhcp  
#address 192.168.16.157
#netmask 255.255.255.0

        #bridge_fd 9
        #bridge_hello 2
        #bridge_maxage 12
        #bridge_stp off
        pre-up brctl addbr br1
        pre-up brctl addif br1 vlan3
        hwaddress ether 00:1c:f0:0e:86:d8
        post-down brctl delbr br1
        ifup br1

root@reboot:/# brctl show
bridge name    bridge id        STP enabled    interfaces
br0        8000.001cf00e86d9    no        bond0
br1        8000.001cf00e86d8    no        vlan3