#!/bin/sh
# Copyright (C) 1999 - 2005 Red Hat, Inc. All rights reserved. This
# copyrighted material is made available to anyone wishing to use, modify,
# copy, or redistribute it subject to the terms and conditions of the
# GNU General Public License version 2.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# Authors:
#    Mike A. Harris <mharris@redhat.com>

# Mandatorily source xinitrc-common, which is common code shared between the
# Xsession and xinitrc scripts which has been factored out to avoid duplication
. /etc/X11/xinit/xinitrc-common

# The user may have their own clients they want to run.  If they don't,
# fall back to system defaults.
if [ -f $HOME/.Xclients ]; then
    exec $SSH_AGENT $DBUS_LAUNCH $HOME/.Xclients || \
    exec $SSH_AGENT $HOME/.Xclients
elif [ -f /etc/X11/xinit/Xclients ]; then
    exec $SSH_AGENT $DBUS_LAUNCH /etc/X11/xinit/Xclients || \
    exec $SSH_AGENT /etc/X11/xinit/Xclients
else
    # Failsafe settings.  Although we should never get here
    # (we provide fallbacks in Xclients as well) it can't hurt.
    [ -x /usr/bin/xsetroot ] && /usr/bin/xsetroot -solid '#222E45'
    [ -x /usr/bin/xclock ] && /usr/bin/xclock -geometry 100x100-5+5 &
    [ -x /usr/bin/xterm ] && xterm -geometry 80x50-50+150 &
    [ -x /usr/bin/twm ] && /usr/bin/twm
fi

#!/bin/bash
# Copyright (C) 1999 - 2004 Red Hat, Inc. All rights reserved. This
# copyrighted material is made available to anyone wishing to use, modify,
# copy, or redistribute it subject to the terms and conditions of the
# GNU General Public License version 2.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

# redirect errors to a file in user's home directory if we can
if [ -z "$GDMSESSION" ]; then
    # GDM redirect output itself in a smarter fashion
    errfile="$HOME/.xsession-errors"
    if ( umask 077 && cp /dev/null "$errfile" 2> /dev/null ); then
        chmod 600 "$errfile"
        exec > "$errfile" 2>&1
    else
        errfile=$(mktemp -q /tmp/xses-$USER.XXXXXX)
        if [ $? -eq 0 ]; then
            exec > "$errfile" 2>&1
        fi
    fi
fi

SWITCHDESKPATH=/usr/share/switchdesk

# Mandatorily source xinitrc-common, which is common code shared between the
# Xsession and xinitrc scripts which has been factored out to avoid duplication
. /etc/X11/xinit/xinitrc-common

# This Xsession.d implementation, is intended to obsolte and replace the
# various mechanisms present in the 'case' statement which follows, and to
# eventually be able to easily remove all hard coded window manager specific
# content from this script.  See bug #142260 for additional explanation and
# details.  All window manager rpm packages and desktop environment
# packages should be modified to provide the Xsession.d/Xsession.$wm scripts
# to start themselves up.  In the future, the legacy switchdesk mechanisms
# and hard coded window managers and desktop environments will be removed from
# this script. 
XCLIENTS_D=/etc/X11/xinit/Xclients.d
if [ -d "$XCLIENTS_D" -a "$#" -eq 1 -a -x "$XCLIENTS_D/Xclients.$1.sh" ]; then
    exec -l $SHELL -c "$SSH_AGENT $DBUS_LAUNCH $XCLIENTS_D/Xclients.$1.sh"
else
# now, we see if xdm/gdm/kdm has asked for a specific environment
case $# in
1)
    if [ -x "$SWITCHDESKPATH/Xclients.$1" ]; then
       exec -l $SHELL -c "$SWITCHDESKPATH/Xclients.$1";
    fi;

    case "$1" in
    failsafe)
        exec -l $SHELL -c "xterm -geometry 80x24-0-0"
        ;;
    gnome)
        exec $SSH_AGENT /bin/sh -c "exec -l $SHELL -c \"$DBUS_LAUNCH gnome-session\"" 
        ;;
    kde|kde1|kde2)
        exec $SSH_AGENT /bin/sh -c "exec -l $SHELL -c \"$DBUS_LAUNCH startkde\""
        ;;
    twm)
        # fall back to twm
        exec $SSH_AGENT /bin/sh -c "exec -l $SHELL -c \"DBUS_LAUNCH twm\""
        ;;
    *)
       # GDM provies either a command line as the first argument or
       # provides 'failsafe', 'default' or 'custom'.  KDM will do the
       # same at some point
        if [ "$1" != "default" -a "$1" != "custom" ]; then
        exec $SSH_AGENT /bin/sh -c "exec -l $SHELL -c \"$DBUS_LAUNCH $1\""
        fi
        ;;
    esac
esac
fi

# otherwise, take default action
if [ -x "$HOME/.xsession" ]; then
    exec $SSH_AGENT /bin/sh -c "exec -l $SHELL -c \"$DBUS_LAUNCH $HOME/.xsession\""
elif [ -x "$HOME/.Xclients" ]; then
    exec $SSH_AGENT /bin/sh -c "exec -l $SHELL -c \"$DBUS_LAUNCH $HOME/.Xclients\""
elif [ -x /etc/X11/xinit/Xclients ]; then
    exec $SSH_AGENT /bin/sh -c "exec -l $SHELL -c \"$DBUS_LAUNCH /etc/X11/xinit/Xclients\""
else
    # should never get here; failsafe fallback
    exec -l $SHELL -c "xsm"
fi

#    $OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $

# This is the ssh client system-wide configuration file.  See
# ssh_config(5) for more information.  This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.

# Configuration data is parsed as follows:
#  1. command line options
#  2. user-specific file
#  3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.

# Site-wide defaults for some commonly used options.  For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.

# Host *
#   ForwardAgent no
#   ForwardX11 no
#   RhostsRSAAuthentication no
#   RSAAuthentication yes
#   PasswordAuthentication yes
#   HostbasedAuthentication no
#   BatchMode no
#   CheckHostIP yes
#   AddressFamily any
#   ConnectTimeout 0
#   StrictHostKeyChecking ask
#   IdentityFile ~/.ssh/identity
#   IdentityFile ~/.ssh/id_rsa
#   IdentityFile ~/.ssh/id_dsa
#   Port 22
#   Protocol 2,1
#   Cipher 3des
#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
#   EscapeChar ~
#   Tunnel no
#   TunnelDevice any:any
#   PermitLocalCommand no
Host *
    GSSAPIAuthentication yes
# If this option is set to yes then remote X11 clients will have full access
# to the original X11 display. As virtually no X11 client supports the untrusted
# mode correctly we set this to yes.
    ForwardX11Trusted yes
# Send locale-related environment variables
    SendEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES 
    SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT 
    SendEnv LC_IDENTIFICATION LC_ALL

#    $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

#Port 22
#Protocol 2,1
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768

# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile    .ssh/authorized_keys

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
GSSAPICleanupCredentials yes

# Set this to 'yes' to enable PAM authentication, account processing, 
# and session processing. If this is enabled, PAM authentication will 
# be allowed through the ChallengeResponseAuthentication mechanism. 
# Depending on your PAM configuration, this may bypass the setting of 
# PasswordAuthentication, PermitEmptyPasswords, and 
# "PermitRootLogin without-password". If you just want the PAM account and 
# session checks to run without PAM authentication, then enable this but set 
# ChallengeResponseAuthentication=no
#UsePAM no
UsePAM yes

# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES 
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT 
AcceptEnv LC_IDENTIFICATION LC_ALL
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
#ChrootDirectory none

# no default banner path
#Banner /some/path

# override default of no subsystems
Subsystem    sftp    /usr/libexec/openssh/sftp-server

> xinit /usr/bin/ssh -X useradm@192.168.0.31 gnome-session -- :1


X.Org X Server 1.8.0
Release Date: 2010-04-02
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux sysadminpc 2.6.34.8-0.2-desktop #1 SMP PREEMPT 2011-04-06 18:11:26 +0200 i686
Kernel command line: root=/dev/disk/by-id/ata-ST3320613AS_9SZ60LW8-part6 resume=/dev/disk/by-id/ata-ST3320613AS_9SZ60LW8-part5 splash=silent quiet vga=0x31a
Build Date: 19 August 2010  03:34:17PM
 
Current version of pixman: 0.18.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Wed May 11 14:45:16 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) No input driver/identifier specified (ignoring)
(EE) No input driver/identifier specified (ignoring)
Warning: No xauth data; using fake authentication data for X11 forwarding.
/usr/bin/xauth:  creating new authority file /home/useradm/.Xauthority
gnome-session[8823]: WARNING: Unable to determine session: Unable to lookup session information for process '8823'
gnome-session[8823]: WARNING: Could not parse desktop file /etc/xdg/autostart/ksmolt-autostart.desktop: Недопустимое имя ключа: X-KDE-autostart-condition[$e]
gnome-session[8823]: WARNING: could not read /etc/xdg/autostart/ksmolt-autostart.desktop
GNOME_KEYRING_CONTROL=/tmp/keyring-8AbvSf
SSH_AUTH_SOCK=/tmp/keyring-8AbvSf/ssh
GNOME_KEYRING_PID=8864
GNOME_KEYRING_CONTROL=/tmp/keyring-8AbvSf
SSH_AUTH_SOCK=/tmp/keyring-8AbvSf/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-8AbvSf
SSH_AUTH_SOCK=/tmp/keyring-8AbvSf/ssh

** (gnome-settings-daemon:8867): WARNING **: Can not run apport-checkreports
....