# See /usr/share/postfix/main.cf.dist for a commented, more complete version


# Debian specific:  Specifying a file name will cause the first
# line of that file to be used as the name.  The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname

smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no

# appending .domain is the MUA's job.
append_dot_mydomain = no

# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h

readme_directory = no

# TLS parameters
smtpd_tls_cert_file = /etc/ssl/certs/iRedMail_CA.pem
smtpd_tls_key_file = /etc/ssl/private/iRedMail.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache

# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.

myhostname = libreportal.net
alias_maps = hash:/etc/postfix/aliases
alias_database = hash:/etc/postfix/aliases
myorigin = libreportal
mydestination = libreportal.net localhost
relayhost = 
mynetworks = 127.0.0.1/8 188.226.171.64/24
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
inet_protocols = ipv4
virtual_alias_domains = 
allow_percent_hack = no
swap_bangpath = no
mydomain = libreportal.net
mynetworks_style = host
smtpd_data_restrictions = reject_unauth_pipelining
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = yes
smtp_tls_security_level = may
smtp_tls_CAfile = $smtpd_tls_CAfile
smtpd_sender_restrictions = permit_mynetworks, reject_sender_login_mismatch, permit_sasl_authenticated
delay_warning_time = 0h
maximal_queue_lifetime = 4h
bounce_queue_lifetime = 4h
proxy_read_maps = $canonical_maps $lmtp_generic_maps $local_recipient_maps $mydestination $mynetworks $recipient_bcc_maps $recipient_canonical_maps $relay_domains $relay_recipient_maps $relocated_maps $sender_bcc_maps $sender_canonical_maps $smtp_generic_maps $smtpd_sender_login_maps $transport_maps $virtual_alias_domains $virtual_alias_maps $virtual_mailbox_domains $virtual_mailbox_maps $smtpd_sender_restrictions
smtp_data_init_timeout = 240s
smtp_data_xfer_timeout = 600s
smtpd_helo_required = yes
smtpd_helo_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_helo_hostname, reject_invalid_helo_hostname, check_helo_access pcre:/etc/postfix/helo_access.pcre
queue_run_delay = 300s
minimal_backoff_time = 300s
maximal_backoff_time = 4000s
enable_original_recipient = no
disable_vrfy_command = yes
home_mailbox = Maildir/
allow_min_user = no
message_size_limit = 15728640
virtual_minimum_uid = 2000
virtual_uid_maps = static:2000
virtual_gid_maps = static:2000
virtual_mailbox_base = /var/vmail
transport_maps = proxy:mysql:/etc/postfix/mysql/transport_maps_user.cf, proxy:mysql:/etc/postfix/mysql/transport_maps_domain.cf
virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql/virtual_mailbox_domains.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql/virtual_mailbox_maps.cf
virtual_alias_maps = proxy:mysql:/etc/postfix/mysql/virtual_alias_maps.cf, proxy:mysql:/etc/postfix/mysql/domain_alias_maps.cf, proxy:mysql:/etc/postfix/mysql/catchall_maps.cf, proxy:mysql:/etc/postfix/mysql/domain_alias_catchall_maps.cf
sender_bcc_maps = proxy:mysql:/etc/postfix/mysql/sender_bcc_maps_user.cf, proxy:mysql:/etc/postfix/mysql/sender_bcc_maps_domain.cf
recipient_bcc_maps = proxy:mysql:/etc/postfix/mysql/recipient_bcc_maps_user.cf, proxy:mysql:/etc/postfix/mysql/recipient_bcc_maps_domain.cf
relay_domains = $mydestination, proxy:mysql:/etc/postfix/mysql/relay_domains.cf
smtpd_sender_login_maps = proxy:mysql:/etc/postfix/mysql/sender_login_maps.cf
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = 
broken_sasl_auth_clients = yes
smtpd_sasl_security_options = noanonymous
smtpd_sasl_authenticated_header = no
smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unlisted_recipient, check_policy_service inet:127.0.0.1:7777, check_policy_service inet:127.0.0.1:10031, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_end_of_data_restrictions = check_policy_service inet:127.0.0.1:10031
smtpd_tls_security_level = may
smtpd_tls_loglevel = 0
smtpd_tls_CAfile = /etc/ssl/certs/iRedMail_CA.pem
tls_random_source = dev:/dev/urandom
mailbox_command = /usr/lib/dovecot/deliver
virtual_transport = dovecot
dovecot_destination_recipient_limit = 1
smtpd_sasl_type = dovecot
smtpd_sasl_path = ./dovecot-auth
content_filter = smtp-amavis:[127.0.0.1]:10024
smtp-amavis_destination_recipient_limit = 1

#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       -       -       -       smtpd
#smtp      inet  n       -       -       -       1       postscreen
#smtpd     pass  -       -       -       -       -       smtpd
#dnsblog   unix  -       -       -       -       0       dnsblog
#tlsproxy  unix  -       -       -       -       0       tlsproxy
#submission inet n       -       -       -       -       smtpd
#  -o syslog_name=postfix/submission
#  -o smtpd_tls_security_level=encrypt
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#smtps     inet  n       -       -       -       -       smtpd
#  -o syslog_name=postfix/smtps
#  -o smtpd_tls_wrappermode=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#628       inet  n       -       -       -       -       qmqpd
pickup    fifo  n       -       -       60      1       pickup
cleanup   unix  n       -       -       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       n       300     1       oqmgr
tlsmgr    unix  -       -       -       1000?   1       tlsmgr
rewrite   unix  -       -       -       -       -       trivial-rewrite
bounce    unix  -       -       -       -       0       bounce
defer     unix  -       -       -       -       0       bounce
trace     unix  -       -       -       -       0       bounce
verify    unix  -       -       -       -       1       verify
flush     unix  n       -       -       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       -       -       -       smtp
relay     unix  -       -       -       -       -       smtp
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       -       -       -       showq
error     unix  -       -       -       -       -       error
retry     unix  -       -       -       -       -       error
discard   unix  -       -       -       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       -       -       -       lmtp
anvil     unix  -       -       -       -       1       anvil
scache    unix  -       -       -       -       1       scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
#   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
#  mailbox_transport = lmtp:inet:localhost
#  virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus     unix  -       n       n       -       -       pipe
#  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix  -       n       n       -       -       pipe
#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix    -    n    n    -    2    pipe
  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman   unix  -       n       n       -       -       pipe
  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
  ${nexthop} ${user}

submission inet n       -       n       -       -       smtpd
  -o smtpd_tls_security_level=encrypt
  -o smtpd_sasl_auth_enable=yes
  -o smtpd_client_restrictions=permit_mynetworks,permit_sasl_authenticated,reject
#  -o content_filter=smtp-amavis:[127.0.0.1]:10026

# Use dovecot deliver program as LDA.
dovecot unix    -       n       n       -       -      pipe
    flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${domain} -m ${extension}

smtp-amavis unix -  -   -   -   2  smtp
    -o smtp_data_done_timeout=1200
    -o smtp_send_xforward_command=yes
    -o disable_dns_lookups=yes
    -o max_use=20

127.0.0.1:10025 inet n  -   -   -   -  smtpd
    -o content_filter=
    -o local_recipient_maps=
    -o relay_recipient_maps=
    -o smtpd_restriction_classes=
    -o smtpd_delay_reject=no
    -o smtpd_tls_security_level=none
    -o smtpd_client_restrictions=permit_mynetworks,reject
    -o smtpd_helo_restrictions=
    -o smtpd_sender_restrictions=
    -o smtpd_recipient_restrictions=permit_mynetworks,reject
    -o smtpd_end_of_data_restrictions=
    -o mynetworks_style=host
    -o mynetworks=127.0.0.0/8
    -o strict_rfc821_envelopes=yes
    -o smtpd_error_sleep_time=0
    -o smtpd_soft_error_limit=1001
    -o smtpd_hard_error_limit=1000
    -o smtpd_client_connection_count_limit=0
    -o smtpd_client_connection_rate_limit=0
    -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks,no_address_mappings