[15033.553030] usb 2-7: new full speed USB device using ohci_hcd and address 4
[15033.744034] usb 2-7: New USB device found, idVendor=1410, idProduct=2110
[15033.744039] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15033.744042] usb 2-7: Product: Novatel Wireless CDMA
[15033.744044] usb 2-7: Manufacturer: Novatel Wireless Inc.
[15033.839052] USB Serial support registered for GSM modem (1-port)
[15033.839555] usb 2-7: GSM modem (1-port) converter now attached to ttyUSB1
[15033.839680] usb 2-7: GSM modem (1-port) converter now attached to ttyUSB2
[15033.851458] usb 2-7: GSM modem (1-port) converter now attached to ttyUSB3
[15033.854399] usb 2-7: GSM modem (1-port) converter now attached to ttyUSB4
[15033.854814] usbcore: registered new interface driver option

А почему у ТС не поевляютса устройства ttyUSB не понятно.
Может нуна пошаманить как тут описано.

kaban428 пишет:

Вывод длинный. Что grep'ом искать?

Модем-то подключен был?

Через Virtual Box не пропустишь.

[Andrew@pich428 ~]$ su
Password: 
[root@pich428 Andrew]# dmesg | grep -i usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-300.3.1.el6uek.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-300.3.1.el6uek.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:06.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-1: Product: USB Tablet
usb 2-1: Manufacturer: VirtualBox
usb 2-1: configuration #1 chosen from 1 choice
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input5
generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=12d1, idProduct=1506
usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 1-1: Product: HUAWEI Mobile
usb 1-1: Manufacturer: Huawei Technologies
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb-storage: device scan complete
[root@pich428 Andrew]#

Вывод длинный. Что grep'ом искать?

Модем-то подключен был?
А так, при подключенном модеме

dmesg | grep -i usb

Покажи вывод dmesg для начала.

Вывод длинный. Что grep'ом искать?

  #3 [0037284000 - 0037fefc12]          RAMDISK ==> [0037284000 - 0037fefc12]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [000222d000 - 000222d071]              BRK ==> [000222d000 - 000222d071]
  #6 [0000001000 - 0000005000]      ACPI WAKEUP ==> [0000001000 - 0000005000]
  #7 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff88000009fff0] 9fff0
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002800000-ffff8800035fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262031
  DMA zone: 56 pages used for memmap
  DMA zone: 104 pages reserved
  DMA zone: 3839 pages, LIFO batch:0
  DMA32 zone: 3528 pages used for memmap
  DMA32 zone: 254504 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880002400000 s87512 r8192 d23080 u1048576
pcpu-alloc: s87512 r8192 d23080 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258343
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/vg_pich428-lv_root rd_LVM_LV=vg_pich428/lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD quiet SYSFONT=latarcyrheb-sun16 rhgb  rd_LVM_LV=vg_pich428/lv_swap  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1000980k/1048512k available (4441k kernel code, 388k absent, 47144k reserved, 7086k data, 1704k init)
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:424
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 10485760 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2379.369 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4758.73 BogoMIPS (lpj=2379369)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22733 entries in 90 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz stepping 05
APIC calibration not consistent with PM-Timer: 102ms instead of 100ms
APIC delta adjusted to PM-Timer: 6250005 (6435085)
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 0 MCE banks
CPU1: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 70452 cycles TSC warp between CPUs, turning off TSC clock.
Please try to boot with tscsync
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (9561.68 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
  groups: 1 0
regulator: core version 0.5
Time: 20:57:37  Date: 05/25/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f]
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff]
pci 0000:00:03.0: reg 10 32bit mmio: [0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 18 io port: [0xd010-0xd017]
pci 0000:00:04.0: reg 10 io port: [0xd020-0xd03f]
pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18 32bit mmio pref: [0xf0800000-0xf0803fff]
pci 0000:00:05.0: reg 10 io port: [0xd100-0xd1ff]
pci 0000:00:05.0: reg 14 io port: [0xd200-0xd23f]
pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff]
pci 0000:00:0b.0: reg 10 32bit mmio: [0xf0805000-0xf0805fff]
pci 0000:00:0d.0: reg 10 io port: [0xd240-0xd247]
pci 0000:00:0d.0: reg 18 io port: [0xd250-0xd257]
pci 0000:00:0d.0: reg 20 io port: [0xd260-0xd26f]
pci 0000:00:0d.0: reg 24 32bit mmio: [0xf0806000-0xf0807fff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13743k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1337979457.528:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1981
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key E659012D641AF443
- User ID: Oracle America, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ACPI: Battery Slot [BAT0] (battery present)
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:0b.0: setting latency timer to 64
ehci_hcd 0000:00:0b.0: EHCI Host Controller
ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0805000
ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-300.3.1.el6uek.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-300.3.1.el6uek.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:06.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
  Magic number: 12:437:1004
input input1: hash matches
rtc_cmos rtc_cmos: setting system clock to 2012-05-25 20:57:38 UTC (1337979458)
Initalizing network drop monitor service
Freeing unused kernel memory: 1704k freed
Write protecting the kernel read-only data: 6672k
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
dracut: dracut-004-256.0.1.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 2-1: new full speed USB device using ohci_hcd and address 2
ahci 0000:00:0d.0: version 3.0
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
ahci 0000:00:0d.0: setting latency timer to 64
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-1: Product: USB Tablet
usb 2-1: Manufacturer: VirtualBox
usb 2-1: configuration #1 chosen from 1 choice
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input5
generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 217561088 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 217561088 512-byte logical blocks: (111 GB/103 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: detected capacity change from 0 to 111391277056
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata3.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
dracut: Scanning devices sda2  for LVM logical volumes vg_pich428/lv_root vg_pich428/lv_swap
dracut: inactive '/dev/vg_pich428/lv_root' [49.59 GiB] inherit
dracut: inactive '/dev/vg_pich428/lv_home' [51.69 GiB] inherit
dracut: inactive '/dev/vg_pich428/lv_swap' [1.97 GiB] inherit
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_pich428-lv_root
dracut: Loading SELinux policy
type=1404 audit(1337979464.653:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 225597 rules.
SELinux: 8192 avtab hash slots, 225597 rules.
SELinux:  9 users, 12 roles, 3577 types, 179 bools, 1 sens, 1024 cats
SELinux:  81 classes, 225597 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1337979465.099:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-1-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
e1000 0000:00:03.0: setting latency timer to 64
e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:e7:a2:07
e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
microcode: CPU0 sig=0x20655, pf=0x1, revision=0x0
platform microcode: firmware: requesting intel-ucode/06-25-05
microcode: CPU1 sig=0x20655, pf=0x1, revision=0x0
platform microcode: firmware: requesting intel-ucode/06-25-05
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Intel ICH 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Intel ICH 0000:00:05.0: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 51074 usecs (8952 samples)
intel8x0: measured clock 175275 rejected
intel8x0_measure_ac97_clock: measured 51713 usecs (7200 samples)
intel8x0: measured clock 139229 rejected
intel8x0_measure_ac97_clock: measured 50770 usecs (7200 samples)
intel8x0: measured clock 141816 rejected
intel8x0: clocking to 48000
parport_pc 00:04: reported by Plug and Play ACPI
input: PC Speaker as /devices/platform/pcspkr/input/input6
ppdev: user-space parallel port driver
EXT4-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 2064376k swap on /dev/mapper/vg_pich428-lv_swap.  Priority:-1 extents:1 across:2064376k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (7940 buckets, 31760 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
CacheFiles: Loaded
FS-Cache: Cache "mycache" added (type cachefiles)
CacheFiles: File cache on dm-0 registered
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bridge firewalling registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
Ebtables v2.0 registered
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
eth0: no IPv6 routers present
fuse init (API version 7.13)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
ata3.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
         res 41/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
ata3.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
         res 41/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
ata3.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
         res 41/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
sr 2:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 41/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
sr 2:0:0:0: ioctl_internal_command return code = 8000002
   : Sense Key : Aborted Command [current] [descriptor]
   : Add. Sense: No additional sense information
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 41/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 41/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 41/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
sr 2:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 41/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
sr 2:0:0:0: ioctl_internal_command return code = 8000002
   : Sense Key : Aborted Command [current] [descriptor]
   : Add. Sense: No additional sense information
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
[Andrew@pich428 ~]$

ls /dev | grep ttyUSB

ну или

ls /dev/usb | grep ttyUSB

при попытке запустить исполняемые файлы каталога Linux выдает ошибку.

Скопируй эту папку в домашний каталог и пробуй устанавливать от туда. А лучше всего

ls -l Linux

А вообще, не нужен вам мегафоновский софт. Юзайте kppp, например, или хотя бы Network Manager.

В принципе, в мануале указаны совместимые версии - Ubuntu 10.04/9.10/9.04; OpenSuse 11.2, Red Flag 7.0 - но хотелось бы его запустить под Fedora/RHEL/Oracle Linux. Кто знает как - помогите, пожалуйста. Если это невозможно - посоветуйте версию из упомянутых совместимых для ноутбука для работы с расчетными таблицами/интернетом/баз данных.
___________________
Спасибо.