wget http://downloads.zend.com/optimizer/3.3 … 386.tar.gz

[CENSORED], вывод из консоли покажи

i2ks пишет:

wget имя файла, то что пытаешься скачать

wget http://downloads.zend.com/optimizer/3.3 … 386.tar.gz

А что при этом происходит? Курсор смещается на новую строку и мигает там после запуска команды? Хм, поробуйте что-нибудь другое скачать, обновить wget...

wget имя файла, то что пытаешься скачать

wget http://downloads.zend.com/optimizer/3.3 … 386.tar.gz

PING 184.106.35.176 (184.106.35.176) 56(84) bytes of data.

wget имя файла, то что пытаешься скачать

Ничего криминального не вижу. Все по умолчанию.
UPD: а какая версия wget?

wget --version

1.12

А в /etc/wgetrc, ~/.wgetrc, если они есть, ничего лишнего нет? Или в переменных окружения?

wgetrc

###
### Sample Wget initialization file .wgetrc
###

## You can use this file to change the default behaviour of wget or to
## avoid having to type many many command-line options. This file does
## not contain a comprehensive list of commands -- look at the manual
## to find out what you can put into this file.
##
## Wget initialization file can reside in /etc/wgetrc
## (global, for all users) or $HOME/.wgetrc (for a single user).
##
## To use the settings in this file, you will have to uncomment them,
## as well as change them, in most cases, as the values on the
## commented-out lines are the default values (e.g. "off").

##
## Global settings (useful for setting up in /etc/wgetrc).
## Think well before you change them, since they may reduce wget's
## functionality, and make it behave contrary to the documentation:
##

# You can set retrieve quota for beginners by specifying a value
# optionally followed by 'K' (kilobytes) or 'M' (megabytes).  The
# default quota is unlimited.
#quota = inf

# You can lower (or raise) the default number of retries when
# downloading a file (default is 20).
#tries = 20

# Lowering the maximum depth of the recursive retrieval is handy to
# prevent newbies from going too "deep" when they unwittingly start
# the recursive retrieval.  The default is 5.
#reclevel = 5

# By default Wget uses "passive FTP" transfer where the client
# initiates the data connection to the server rather than the other
# way around.  That is required on systems behind NAT where the client
# computer cannot be easily reached from the Internet.  However, some
# firewalls software explicitly supports active FTP and in fact has
# problems supporting passive transfer.  If you are in such
# environment, use "passive_ftp = off" to revert to active FTP.
#passive_ftp = off

# The "wait" command below makes Wget wait between every connection.
# If, instead, you want Wget to wait only between retries of failed
# downloads, set waitretry to maximum number of seconds to wait (Wget
# will use "linear backoff", waiting 1 second after the first failure
# on a file, 2 seconds after the second failure, etc. up to this max).
waitretry = 10

##
## Local settings (for a user to set in his $HOME/.wgetrc).  It is
## *highly* undesirable to put these settings in the global file, since
## they are potentially dangerous to "normal" users.
##
## Even when setting up your own ~/.wgetrc, you should know what you
## are doing before doing so.
##

# Set this to on to use timestamping by default:
#timestamping = off

# It is a good idea to make Wget send your email address in a `From:'
# header with your request (so that server administrators can contact
# you in case of errors).  Wget does *not* send `From:' by default.
#header = From: Your Name <username@site.domain>

# You can set up other headers, like Accept-Language.  Accept-Language
# is *not* sent by default.
#header = Accept-Language: en

# You can set the default proxies for Wget to use for http and ftp.
# They will override the value in the environment.
#http_proxy = http://proxy.yoyodyne.com:18023/
#ftp_proxy = http://proxy.yoyodyne.com:18023/

# If you do not want to use proxy at all, set this to off.
#use_proxy = on

# You can customize the retrieval outlook.  Valid options are default,
# binary, mega and micro.
#dot_style = default

# Setting this to off makes Wget not download /robots.txt.  Be sure to
# know *exactly* what /robots.txt is and how it is used before changing
# the default!
#robots = on

# It can be useful to make Wget wait between connections.  Set this to
# the number of seconds you want Wget to wait.
#wait = 0

# You can force creating directory structure, even if a single is being
# retrieved, by setting this to on.
#dirstruct = off

# You can turn on recursive retrieving by default (don't do this if
# you are not sure you know what it means) by setting this to on.
#recursive = off

# To always back up file X as X.orig before converting its links (due
# to -k / --convert-links / convert_links = on having been specified),
# set this variable to on:
#backup_converted = off

# To have Wget follow FTP links from HTML files by default, set this
# to on:
#follow_ftp = off

heyday пишет:

да

вывод с консоли покажи

PING 184.106.35.176 (184.106.35.176) 56(84) bytes of data.
64 bytes from 184.106.35.176: icmp_seq=1 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=2 ttl=237 time=143 ms
64 bytes from 184.106.35.176: icmp_seq=3 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=4 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=5 ttl=237 time=144 ms
64 bytes from 184.106.35.176: icmp_seq=6 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=7 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=8 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=9 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=10 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=11 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=12 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=13 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=14 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=15 ttl=237 time=142 ms
64 bytes from 184.106.35.176: icmp_seq=16 ttl=237 time=143 ms
64 bytes from 184.106.35.176: icmp_seq=17 ttl=237 time=143 ms

да

вывод с консоли покажи

Ну а сайт пингуется с сервера?

да

Сеть точно есть? Сайт пингуется? Место на жёстком диске не закончилось? Файловая система доступна для чтения?

сервер удаленный. место не закончилось. доступна