[neogotlic@localhost ~]$ dmidecode
# dmidecode 2.11
/dev/mem: Permission denied
[neogotlic@localhost ~]$ uname -a
Linux localhost.localdomain 3.2.18-pclos2.bfs #1 SMP PREEMPT Thu May 24 04:44:50 CEST 2012 i686 i686 i386 GNU/Linux
[neogotlic@localhost ~]$ cat /proc/version
Linux version 3.2.18-pclos2.bfs (as@dv1710.as) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Thu May 24 04:44:50 CEST 2012
[neogotlic@localhost ~]$ cat /proc/cpuinfo
processor    : 0
vendor_id    : AuthenticAMD
cpu family    : 6
model        : 8
model name    : AMD Athlon(tm) MP
stepping    : 1
cpu MHz        : 950.066
cache size    : 256 KB
fdiv_bug    : no
hlt_bug        : no
f00f_bug    : no
coma_bug    : no
fpu        : yes
fpu_exception    : yes
cpuid level    : 1
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow up
bogomips    : 1900.13
clflush size    : 32
cache_alignment    : 32
address sizes    : 34 bits physical, 32 bits virtual
power management: ts

[neogotlic@localhost ~]$ blkid
/dev/sda5: UUID="06ad90fc-d2cc-48fd-9c79-ec2cf52ff000" TYPE="swap"
/dev/sda2: UUID="5C883E6910E2601D" TYPE="ntfs"
/dev/sda7: UUID="12a7b7ec-5af2-40a9-9ae7-75f01578f2e9" TYPE="ext4"
/dev/sda8: UUID="685b31a9-7c5b-4479-a559-6d66ff2c8444" TYPE="ext4"
/dev/sda1: UUID="F4C0AA0FC0A9D7DE" TYPE="ntfs"
/dev/sda6: UUID="3d41a30d-5902-45ab-a89d-f19cc7491741" TYPE="ext4"
[neogotlic@localhost ~]$

[neogotlic@localhost ~]$ dmesg,lspci,lsusb,lshw
bash: dmesg,lspci,lsusb,lshw: command not found
[neogotlic@localhost ~]$ dmesg
Linux version 3.2.18-pclos2.bfs (as@dv1710.as) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Thu May 24 04:44:50 CEST 2012
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ffb0000 (usable)
BIOS-e820: 000000002ffb0000 - 000000002ffc0000 (ACPI data)
BIOS-e820: 000000002ffc0000 - 000000002fff0000 (ACPI NVS)
BIOS-e820: 000000002fff0000 - 0000000030000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.3 present.
DMI:          K7V88/K7V88, BIOS P1.10 06/25/2004
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x2ffb0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FE0000000 write-back
  1 base 020000000 mask FF0000000 write-back
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 00c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-000000002ebfe000
0000000000 - 0000400000 page 4k
0000400000 - 002e800000 page 2M
002e800000 - 002ebfe000 page 4k
kernel direct mapping tables up to 2ebfe000 @ bfa000-c00000
RAMDISK: 2f0ec000 - 2f719000
Allocated new RAMDISK: 2e5d1000 - 2ebfd6a0
Move RAMDISK from 000000002f0ec000 - 000000002f71869f to 2e5d1000 - 2ebfd69f
ACPI: RSDP 000f8c10 00014 (v00 ACPIAM)
ACPI: RSDT 2ffb0000 00030 (v01 A M I  OEMRSDT  06000425 MSFT 00000097)
ACPI: FACP 2ffb0200 00081 (v02 A M I  OEMFACP  06000425 MSFT 00000097)
ACPI: DSDT 2ffb0350 0345D (v01  K7V88 K7V88001 00000001 INTL 02002026)
ACPI: FACS 2ffc0000 00040
ACPI: APIC 2ffb0300 0004A (v01 A M I  OEMAPIC  06000425 MSFT 00000097)
ACPI: OEMB 2ffc0040 0003F (v01 A M I  OEMBIOS  06000425 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
19MB HIGHMEM available.
747MB LOWMEM available.
  mapped low ram: 0 - 2ebfe000
  low ram: 0 - 2ebfe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0002ebfe
  HighMem  0x0002ebfe -> 0x0002ffb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0002ffb0
On node 0 totalpages: 196415
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1464 pages used for memmap
  Normal zone: 185926 pages, LIFO batch:31
  HighMem zone: 40 pages used for memmap
  HighMem zone: 5002 pages, LIFO batch:0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 30000000:cffc0000)
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @edfbe000 s27904 r0 d21248 u49152
pcpu-alloc: s27904 r0 d21248 u49152 alloc=12*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194879
Kernel command line: BOOT_IMAGE=/boot/vmlinuz BOOT_IMAGE=linux root=UUID=685b31a9-7c5b-4479-a559-6d66ff2c8444 quiet vmalloc=256M acpi=on resume=UUID=06ad90fc-d2cc-48fd-9c79-ec2cf52ff000 splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (0002ebfe:0002ffb0)
Memory: 766628k/786112k available (3320k kernel code, 19032k reserved, 1322k data, 484k init, 20168k highmem)
virtual kernel memory layout:
    fixmap  : 0xffab6000 - 0xfffff000   (5412 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xef3fe000 - 0xff3fe000   ( 256 MB)
    lowmem  : 0xc0000000 - 0xeebfe000   ( 747 MB)
      .init : 0xc0589000 - 0xc0602000   ( 484 kB)
      .data : 0xc043e32d - 0xc0588e40   (1322 kB)
      .text : 0xc0100000 - 0xc043e32d   (3320 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:1192 16
CPU 0 irqstacks, hard=ed808000 soft=ed80a000
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 950.066 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 1900.13 BogoMIPS (lpj=950066)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
mce: CPU supports 4 MCE banks
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20110623
ftrace: allocating 14801 entries in 29 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) MP  stepping 01
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
Brought up 1 CPUs
Total of 1 processors activated (1900.13 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 2ffc0000 (196608 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xffffffff] (ignored)
pci 0000:00:00.0: [1106:0269] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
pci 0000:00:00.1: [1106:1269] type 0 class 0x000600
pci 0000:00:00.2: [1106:2269] type 0 class 0x000600
pci 0000:00:00.3: [1106:3269] type 0 class 0x000600
pci 0000:00:00.4: [1106:4269] type 0 class 0x000600
pci 0000:00:00.7: [1106:7269] type 0 class 0x000600
pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
pci 0000:00:01.0: supports D1
pci 0000:00:0b.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:0b.0: reg 20: [io  0xb800-0xb81f]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: [1106:3038] type 0 class 0x000c03
pci 0000:00:0b.1: reg 20: [io  0xbc00-0xbc1f]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0b.2: [1106:3104] type 0 class 0x000c03
pci 0000:00:0b.2: reg 10: [mem 0xfebff400-0xfebff4ff]
pci 0000:00:0b.2: supports D1 D2
pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.2: PME# disabled
pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104
pci 0000:00:0f.0: reg 10: [io  0xec00-0xec07]
pci 0000:00:0f.0: reg 14: [io  0xe800-0xe803]
pci 0000:00:0f.0: reg 18: [io  0xe400-0xe407]
pci 0000:00:0f.0: reg 1c: [io  0xe000-0xe003]
pci 0000:00:0f.0: reg 20: [io  0xdc00-0xdc0f]
pci 0000:00:0f.0: reg 24: [io  0xd800-0xd8ff]
pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
pci 0000:00:0f.1: reg 20: [io  0xfc00-0xfc0f]
pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.0: reg 20: [io  0xc000-0xc01f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.1: reg 20: [io  0xc400-0xc41f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.2: reg 20: [io  0xc800-0xc81f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.3: reg 20: [io  0xcc00-0xcc1f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
pci 0000:00:10.4: reg 10: [mem 0xfebff800-0xfebff8ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
pci 0000:00:11.5: reg 10: [io  0xd000-0xd0ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
pci 0000:00:12.0: reg 10: [io  0xd400-0xd4ff]
pci 0000:00:12.0: reg 14: [mem 0xfebffc00-0xfebffcff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: [1002:5960] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
pci 0000:01:00.0: reg 14: [io  0xa800-0xa8ff]
pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff]
pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:5940] type 0 class 0x000380
pci 0000:01:00.1: reg 10: [mem 0xb8000000-0xbfffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xfeae0000-0xfeaeffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xaff00000-0xcfefffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000002ffb0000 - 000000002fffffff
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x30000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io  0x0000-0x000f]
pnp 00:01: [io  0x0081-0x0083]
pnp 00:01: [io  0x0087]
pnp 00:01: [io  0x0089-0x008b]
pnp 00:01: [io  0x008f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x03f0-0x03f5]
pnp 00:05: [io  0x03f7]
pnp 00:05: [irq 6]
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:06: [io  0x0378-0x037f]
pnp 00:06: [io  0x0778-0x077b]
pnp 00:06: [irq 7]
pnp 00:06: [dma 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: [io  0x0200-0x0207]
pnp 00:07: Plug and Play ACPI device, IDs PNPb02f (active)
pnp 00:08: [io  0x0010-0x001f]
pnp 00:08: [io  0x0022-0x003f]
pnp 00:08: [io  0x0044-0x005f]
pnp 00:08: [io  0x0062-0x0063]
pnp 00:08: [io  0x0065-0x006f]
pnp 00:08: [io  0x0072-0x007f]
pnp 00:08: [io  0x0080]
pnp 00:08: [io  0x0084-0x0086]
pnp 00:08: [io  0x0088]
pnp 00:08: [io  0x008c-0x008e]
pnp 00:08: [io  0x0090-0x009f]
pnp 00:08: [io  0x00a2-0x00bf]
pnp 00:08: [io  0x00e0-0x00ef]
pnp 00:08: [io  0x0295-0x0296]
pnp 00:08: [io  0x03e0-0x03e7]
pnp 00:08: [io  0x04d0-0x04d1]
pnp 00:08: [io  0x0800-0x087f]
pnp 00:08: [io  0x0400-0x041f]
pnp 00:08: [io  0x0000-0xffffffff disabled]
system 00:08: [io  0x0295-0x0296] has been reserved
system 00:08: [io  0x03e0-0x03e7] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0400-0x041f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfec80000-0xfec800ff]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: [mem 0xfff80000-0xffffffff]
system 00:09: [mem 0xfec80000-0xfec800ff] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xfff80000-0xffffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io  0x0060]
pnp 00:0a: [io  0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [io  0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000dffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0x2fffffff]
pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0x2fffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xaff00000-0xcfefffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xaff00000-0xcfefffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:0b.0: PCI INT A disabled
pci 0000:00:0b.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:0b.1: PCI INT B disabled
pci 0000:00:0b.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:0b.2: PCI INT C disabled
pci 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.0: PCI INT A disabled
pci 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.1: PCI INT A disabled
pci 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.2: PCI INT B disabled
pci 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.3: PCI INT B disabled
pci 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.4: PCI INT C disabled
pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 32
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6324k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1362203125.520:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1470
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 800x600x16, linelength=1600, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xc0000000, mapped to 0xef480000, using 960k, total 960k
fbcon: VESA VGA (fb0) is primary device
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart: Detected VIA KT880 chipset
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2013-03-02 05:45:26 UTC (1362203126)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 484k freed
Write protecting the kernel text: 3324k
Write protecting the kernel read-only data: 1032k
BFS CPU scheduler v0.416 by Con Kolivas.
nash-hotplug (29): /proc/29/oom_adj is deprecated, please use /proc/29/oom_score_adj instead.
Refined TSC clocksource calibration: 950.030 MHz.
Switching to clocksource tsc
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:0f.1: version 0.3.4
pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata1.00: ATA-6: WDC WD800JB-00FMA0, 13.03G13, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ata1.01: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JB-00FM 13.0 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.05 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
sata_via 0000:00:0f.0: version 2.6
sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi2 : sata_via
scsi3 : sata_via
ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts:
udev[97]: starting version 167
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:0b.0: UHCI Host Controller
uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:0b.0: irq 19, io base 0x0000b800
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.18-pclos2.bfs uhci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:0b.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:0b.1: UHCI Host Controller
uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:0b.1: irq 16, io base 0x0000bc00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.18-pclos2.bfs uhci_hcd
usb usb2: SerialNumber: 0000:00:0b.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.18-pclos2.bfs uhci_hcd
usb usb3: SerialNumber: 0000:00:10.0
, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.18-pclos2.bfs uhci_hcd
usb usb4: SerialNumber: 0000:00:10.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.18-pclos2.bfs uhci_hcd
usb usb5: SerialNumber: 0000:00:10.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000cc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.18-pclos2.bfs uhci_hcd
usb usb6: SerialNumber: 0000:00:10.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:0b.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:0b.2: EHCI Host Controller
ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:0b.2: irq 17, io mem 0xfebff400
ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.18-pclos2.bfs ehci_hcd
usb usb7: SerialNumber: 0000:00:0b.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800
ppdev: user-space parallel port driver
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.18-pclos2.bfs ehci_hcd
usb usb8: SerialNumber: 0000:00:10.4
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 8 ports detected
gameport gameport0: NS558 PnP Gameport is pnp00:07/gameport0, io 0x200, speed 903kHz
usb 4-1: new low-speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=04f3, idProduct=0217
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Mouse
input: USB Mouse as /devices/pci0000:00/0000:00:10.1/usb4/4-1/4-1:1.0/input/input3
generic-usb 0003:04F3:0217.0001: input,hidraw0: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:10.1-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
fuse init (API version 7.17)
EXT4-fs (sda8): re-mounted. Opts: (null)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Adding 1624060k swap on /dev/sda5.  Priority:-1 extents:1 across:1624060k
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
agpgart-via 0000:00:00.0: AGP 3.5 bridge
agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
pci 0000:01:00.0: putting AGP V3 device into 8x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Attached scsi generic sg1 type 5
via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1d400, 00:0b:6a:68:c8:64, IRQ 23
via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
[drm] writeback test succeeded in 1 usecs
snd_via82xx 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
snd_via82xx 0000:00:11.5: setting latency timer to 64
NET: Registered protocol family 10
via-rhine 0000:00:12.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
PPP generic driver version 2.4.2
Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-ppp0 instead
NET: Registered protocol family 17
eth0: no IPv6 routers present
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
firefox:2856 freeing invalid memtype e0102000-e0112000
firefox:2856 freeing invalid memtype e0112000-e0122000
firefox:2856 freeing invalid memtype e0122000-e0132000
firefox:2856 freeing invalid memtype e0132000-e0142000
firefox:2856 freeing invalid memtype e0142000-e0152000
firefox:2856 freeing invalid memtype e0152000-e0162000
firefox:2856 freeing invalid memtype e0162000-e0172000
firefox:2856 freeing invalid memtype e0172000-e0182000
firefox:2856 freeing invalid memtype e0182000-e0192000
firefox:2856 freeing invalid memtype e0192000-e01a2000
firefox:2856 freeing invalid memtype e01a2000-e01b2000
firefox:2856 freeing invalid memtype e01b2000-e01c2000
firefox:2856 freeing invalid memtype e01c2000-e01d2000
firefox:2856 freeing invalid memtype e01d2000-e01e2000
firefox:2856 freeing invalid memtype e01e2000-e01f2000
firefox:2856 freeing invalid memtype e01f2000-e0202000
firefox:2856 freeing invalid memtype e0202000-e0212000
firefox:2856 freeing invalid memtype e0212000-e0222000
firefox:2856 freeing invalid memtype e0222000-e0232000
firefox:2856 freeing invalid memtype e0232000-e0242000
firefox:2856 freeing invalid memtype e0242000-e0252000
firefox:2856 freeing invalid memtype e0252000-e0262000
firefox:2856 freeing invalid memtype e0262000-e0272000
firefox:2856 freeing invalid memtype e0272000-e0282000
firefox:2856 freeing invalid memtype e0282000-e0292000
firefox:2856 freeing invalid memtype e0292000-e02a2000
firefox:2856 freeing invalid memtype e02a2000-e02b2000
firefox:2856 freeing invalid memtype e02b2000-e02c2000
firefox:2856 freeing invalid memtype e02c2000-e02d2000
firefox:2856 freeing invalid memtype e02d2000-e02e2000
firefox:2856 freeing invalid memtype e02e2000-e02f2000
firefox:2856 freeing invalid memtype e02f2000-e0302000
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (12085 buckets, 48340 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ctnetlink v0.93: registering with nfnetlink.
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
xt_time: kernel timezone is +0200
u32 classifier
    Actions configured
usbcore: registered new interface driver snd-usb-audio
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
[neogotlic@localhost ~]$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0b.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
00:0b.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
00:0b.2 USB controller: VIA Technologies, Inc. USB 2.0 (rev 65)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
[neogotlic@localhost ~]$ lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 04f3:0217 Elan Microelectronics Corp.
[neogotlic@localhost ~]$ lshw
bash: lshw: command not found
[neogotlic@localhost ~]$