yum install kmod-r8192ce

sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
_OSC invalid UUID
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xc0000000-0xc03fffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xb0000000-0xbfffffff]
pci 0000:00:02.0: reg 20 io port: [0x5000-0x503f]
pci 0000:00:16.0: reg 10 64bit mmio: [0xc2604000-0xc260400f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xc2609000-0xc26093ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xc2600000-0xc2603fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xc2608000-0xc26083ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x5088-0x508f]
pci 0000:00:1f.2: reg 14 io port: [0x5094-0x5097]
pci 0000:00:1f.2: reg 18 io port: [0x5080-0x5087]
pci 0000:00:1f.2: reg 1c io port: [0x5090-0x5093]
pci 0000:00:1f.2: reg 20 io port: [0x5060-0x507f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xc2607000-0xc26077ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xc2605000-0xc26050ff]
pci 0000:00:1f.3: reg 20 io port: [0x5040-0x505f]
pci 0000:01:00.0: reg 10 io port: [0x4000-0x40ff]
pci 0000:01:00.0: reg 18 64bit mmio pref: [0xc0404000-0xc0404fff]
pci 0000:01:00.0: reg 20 64bit mmio pref: [0xc0400000-0xc0403fff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xc0400000-0xc04fffff]
pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:02:00.0: reg 18 64bit mmio: [0xc2500000-0xc2503fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xc2500000-0xc25fffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xc1500000-0xc1500fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xc1500000-0xc24fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xc0500000-0xc14fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
_OSC invalid UUID
_OSC invalid UUID
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0x1000-0x100f has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0x400-0x453 has been reserved
system 00:05: ioport range 0x458-0x47f has been reserved
system 00:05: ioport range 0x500-0x57f has been reserved
system 00:05: ioport range 0x164e-0x164f has been reserved
system 00:07: ioport range 0x454-0x457 has been reserved
system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved
system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0a: iomem range 0xafa00000-0xafa00fff has been reserved
system 00:0b: iomem range 0x20000000-0x201fffff could not be reserved
system 00:0b: iomem range 0x40000000-0x401fffff could not be reserved
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   bridge window [0x4000-0x4fff]
pci 0000:00:1c.0:   bridge window [mem disabled]
pci 0000:00:1c.0:   bridge window [0xc0400000-0xc04fffff]
pci 0000:00:1c.2: PCI bridge to [bus 02-02]
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.2:   bridge window [0x3000-0x3fff]
pci 0000:00:1c.2:   bridge window [0xc2500000-0xc25fffff]
pci 0000:00:1c.2:   bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-08]
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4:   bridge window [0x2000-0x2fff]
pci 0000:00:1c.4:   bridge window [0xc1500000-0xc24fffff]
pci 0000:00:1c.4:   bridge window [0xc0500000-0xc14fffff]
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:01: resource 2 pref mem [0xc0400000-0xc04fffff]
pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xc2500000-0xc25fffff]
pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xc1500000-0xc24fffff]
pci_bus 0000:03: resource 2 pref mem [0xc0500000-0xc14fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13475k freed
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1363697234.666:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7370
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 9D480283FFC05098
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
_OSC invalid UUID
_OSC invalid UUID
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000a6e70798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000a6e71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
ACPI: SSDT 00000000a6e6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TSZ0] (53 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc2609000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc2608000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:06: setting system clock to 2013-03-19 12:47:15 UTC (1363697235)
Initalizing network drop monitor service
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7176k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
dracut: dracut-004-32.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:1f.2: version 3.0
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
usb 1-1: new high speed USB device using ehci_hcd and address 2
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607100 irq 32
ata2: DUMMY
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 32
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9500325AS, 0005HPM1, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0005 PQ: 0 ANSI: 5
Unable to query Synaptics hardware.
usb 1-1.3: new high speed USB device using ehci_hcd and address 3
usb 1-1.3: New USB device found, idVendor=058f, idProduct=a001
usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-1.3: Product: HP Webcam-101
usb 1-1.3: Manufacturer: DCPKN01BI2NH8S
usb 1-1.3: configuration #1 chosen from 1 choice
usb 2-1.1: new high speed USB device using ehci_hcd and address 3
usb 2-1.1: New USB device found, idVendor=8564, idProduct=1000
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Mass Storage Device
usb 2-1.1: Manufacturer: JetFlash
usb 2-1.1: SerialNumber: 66EOUSBTM0K0MVEO
usb 2-1.1: configuration #1 chosen from 1 choice
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: hp      DVD-RAM UJ8B1, H.03, max UDMA/100, ATAPI AN
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM            hp       DVD-RAM UJ8B1    H.03 PQ: 0 ANSI: 5
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
 sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda2  for LVM logical volumes vg_arcom/lv_root vg_arcom/lv_swap 
dracut: inactive '/dev/vg_arcom/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_arcom/lv_home' [409.54 GiB] inherit
dracut: inactive '/dev/vg_arcom/lv_swap' [5.73 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_arcom-lv_root
dracut: Loading SELinux policy
type=1404 audit(1363697238.292:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 199690 rules.
SELinux: 2048 avtab hash slots, 199690 rules.
SELinux:  9 users, 13 roles, 3323 types, 168 bools, 1 sens, 1024 cats
SELinux:  77 classes, 199690 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1363697238.757:3): policy loaded auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
readahead: starting
udev: starting version 147
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access     JetFlash Transcend 8GB    1100 PQ: 0 ANSI: 4
sd 6:0:0:0: [sdb] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  alloc irq_desc for 33 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC259: BIOS auto-probing.
hda_codec: connection list not available for 0x24
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: unknown MAC, using family default
  alloc irq_desc for 34 on node -1
  alloc kstat_irqs on node -1
r8169 0000:01:00.0: irq 34 for MSI/MSI-X
eth0: RTL8168b/8111b at 0xffffc900110cc000, b4:b5:2f:37:69:c2, XID 0c200000 IRQ 34
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x5040-0x505f] conflicts with ACPI region SMBI [0x5040-0x504f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Webcam-101 (058f:a001)
input: HP Webcam-101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
ACPI: WMI: Mapper loaded
EXT4-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 6012920k swap on /dev/mapper/vg_arcom-lv_swap.  Priority:-1 extents:1 across:6012920k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
platform microcode: firmware: requesting intel-ucode/06-2a-07
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
fuse init (API version 7.13)
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts

dmesg

00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
    Subsystem: Hewlett-Packard Company Device 3672
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)
    Subsystem: Hewlett-Packard Company Device 3672
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
    Subsystem: Hewlett-Packard Company Device 3672
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 04)
    Subsystem: Hewlett-Packard Company Device 3672
    Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 3672
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 04)
    Subsystem: Hewlett-Packard Company Device 3672
    Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 3672
    Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 3672
    Kernel driver in use: ahci
    Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 3672
    Kernel modules: i2c-i801
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    Subsystem: Hewlett-Packard Company Device 3672
    Kernel driver in use: r8169
    Kernel modules: r8169
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01)
    Subsystem: Hewlett-Packard Company Device 1629
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
    Subsystem: Hewlett-Packard Company Device 3672

ip a
lspci -k