Linux Forum — Ноут на Опенсусе (12.3) не видит SD-карту.

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (yars) — Mon, 01 Apr 2013 03:45:58 +0000

aliaksei1818 пишет:

Неужели гугл бесполезен?

Вот что ~~крест животворящий~~ свежая голова делает!

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (aliaksei1818) — Sun, 31 Mar 2013 23:35:05 +0000

danilec пишет:

04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company Device 184a

Неужели гугл бесполезен?
http://www.realtek.com.tw/DOWNLOADS/dow … Down=false

zypper ar -f http://download.opensuse.org/repositories/home:/sdrahn:/kmp/openSUSE_12.3/ rts5229
zypper mr -p 110 rts5229
zypper in -f rts5229-kmp-`uname -r|cut -f3 -d"-"`
/sbin/modprobe rts5229

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (danilec) — Sun, 31 Mar 2013 21:21:57 +0000

Через встроенный, название не знаю где посмотреть...

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (yars) — Sun, 31 Mar 2013 20:49:59 +0000

Через какой кард-ридер подключаете? У меня внешний китайский CyberBrand Retail CR 455, разве что CompactFlash я с ним не проверял, но SD/microSD определяются на ура.

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (danilec) — Sun, 31 Mar 2013 20:36:06 +0000

yars⇓ пишет:

udevadm monitor

monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

После подключения SD-карты ноль эмоций...
Хотя если вставить обычную флешку (юсб) то что-то начинает писать.

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (yars) — Sun, 31 Mar 2013 20:31:03 +0000

Хм, что-то я не уловил. Давайте так: дайте от рута команду

udevadm monitor

и подключите проблемную флешку (карту).

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (danilec) — Sun, 31 Mar 2013 20:30:05 +0000

Lupo Alberto⇓ пишет:

lspci -k

+ открыть спойлер

00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
Subsystem: Hewlett-Packard Company Device 184a
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Trinity [Radeon HD 7640G]
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: fglrx_pci
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Trinity HDMI Audio Controller
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: snd_hda_intel
00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port
Kernel driver in use: pcieport
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port
Kernel driver in use: pcieport
00:10.0 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: xhci_hcd
00:10.1 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: xhci_hcd
00:11.0 SATA controller: Advanced Micro Devices [AMD] FCH SATA Controller [AHCI mode]
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ohci_hcd
00:12.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ehci_hcd
00:13.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ohci_hcd
00:13.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ehci_hcd
00:14.0 SMBus: Advanced Micro Devices [AMD] FCH SMBus Controller (rev 14)
Subsystem: Hewlett-Packard Company Device 184a
00:14.2 Audio device: Advanced Micro Devices [AMD] FCH Azalia Controller (rev 01)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices [AMD] FCH LPC Bridge (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
00:14.4 PCI bridge: Advanced Micro Devices [AMD] FCH PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI to PCI bridge (PCIE port 0)
Kernel driver in use: pcieport
00:15.1 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI to PCI bridge (PCIE port 1)
Kernel driver in use: pcieport
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 3
Kernel driver in use: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series]
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: fglrx_pci
02:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
Subsystem: Hewlett-Packard Company Device 18ec
Kernel driver in use: rt2800pci
02:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
Subsystem: Hewlett-Packard Company Device 18ec
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company Device 184a
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller
Kernel driver in use: r8169

Lupo Alberto⇓ пишет:

lspci -n

+ открыть спойлер

0:00.0 0600: 1022:1410
00:01.0 0300: 1002:9903
00:01.1 0403: 1002:9902
00:02.0 0604: 1022:1412
00:04.0 0604: 1022:1414
00:10.0 0c03: 1022:7812 (rev 03)
00:10.1 0c03: 1022:7812 (rev 03)
00:11.0 0106: 1022:7804
00:12.0 0c03: 1022:7807 (rev 11)
00:12.2 0c03: 1022:7808 (rev 11)
00:13.0 0c03: 1022:7807 (rev 11)
00:13.2 0c03: 1022:7808 (rev 11)
00:14.0 0c05: 1022:780b (rev 14)
00:14.2 0403: 1022:780d (rev 01)
00:14.3 0601: 1022:780e (rev 11)
00:14.4 0604: 1022:780f (rev 40)
00:15.0 0604: 1022:43a0
00:15.1 0604: 1022:43a1
00:18.0 0600: 1022:1400
00:18.1 0600: 1022:1401
00:18.2 0600: 1022:1402
00:18.3 0600: 1022:1403
00:18.4 0600: 1022:1404
00:18.5 0600: 1022:1405
01:00.0 0300: 1002:6840
02:00.0 0280: 1814:3290
02:00.1 0d11: 1814:3298
04:00.0 ff00: 10ec:5229 (rev 01)
05:00.0 0200: 10ec:8136 (rev 05)

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (danilec) — Sun, 31 Mar 2013 20:27:32 +0000

Lupo Alberto⇓ пишет:

ls -l /dev/sdb1

ls: невозможно получить доступ к /dev/sdb1: Нет такого файла или каталога

Lupo Alberto⇓ пишет:

id

uid=1000(igor) gid=100(users) группы=100(users)

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (Lupo Alberto) — Sun, 31 Mar 2013 20:27:06 +0000

Покажите (от root):

lspci -k

lspci -n

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (danilec) — Sun, 31 Mar 2013 20:24:30 +0000

Lupo Alberto⇓ пишет:

Карта 8 Гб?

Нет, на 16 Гб
То, что выводится, смахивает на другую флешку ( юсбишную) - по объёму и производителю)

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (Lupo Alberto) — Sun, 31 Mar 2013 20:24:27 +0000

...хотя, если мне не изменяет память, устройство SD-карты должно выглядеть иначе, чем /dev/sdb

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (Lupo Alberto) — Sun, 31 Mar 2013 20:17:57 +0000

Покажите также (от обычного пользователя):

ls -l /dev/sdb1

id

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (Lupo Alberto) — Sun, 31 Mar 2013 20:15:38 +0000

В порядке предварительного эксперимента (от root):

mkdir -p /mnt/sdcard
mount /dev/sdb1 /mnt/sdcard

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (Lupo Alberto) — Sun, 31 Mar 2013 20:13:42 +0000

+ Вроде бы определяется...

danilec⇓ пишет:

[ 4768.336117] usb 7-1: USB disconnect, device number 2
[ 4769.738734] usb 7-1: new high-speed USB device number 3 using xhci_hcd
[ 4769.757726] usb 7-1: New USB device found, idVendor=0718, idProduct=070a
[ 4769.757734] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4769.757739] usb 7-1: Product: TF10
[ 4769.757742] usb 7-1: Manufacturer: TDK LoR
[ 4769.757746] usb 7-1: SerialNumber: 0707274196D75F22
[ 4769.760056] scsi3 : usb-storage 7-1:1.0
[ 4770.842340] scsi 3:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4770.842746] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 4772.221944] sd 3:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4772.222229] sd 3:0:0:0: [sdb] Write Protect is off
[ 4772.222241] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4772.222631] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.222640] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.224936] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.224942] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.245533] sdb: sdb1
[ 4772.246872] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.246879] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.246885] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 4773.468301] usb 7-1: USB disconnect, device number 3
[ 4775.720077] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[ 4775.739103] usb 5-2: New USB device found, idVendor=0718, idProduct=070a
[ 4775.739111] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4775.739116] usb 5-2: Product: TF10
[ 4775.739120] usb 5-2: Manufacturer: TDK LoR
[ 4775.739123] usb 5-2: SerialNumber: 0707274196D75F22
[ 4775.741519] scsi4 : usb-storage 5-2:1.0
[ 4776.823643] scsi 4:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4776.824832] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4778.203299] sd 4:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4778.203480] sd 4:0:0:0: [sdb] Write Protect is off
[ 4778.203485] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4778.203655] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.203662] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.205456] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.205460] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.225847] sdb: sdb1
[ 4778.227218] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.227226] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.227232] sd 4:0:0:0: [sdb] Attached SCSI removable disk

Карта 8 Гб?

Re: Ноут на Опенсусе (12.3) не видит SD-карту.

null@example.com (danilec) — Sun, 31 Mar 2013 20:09:07 +0000

Продолжение (Всё не вписывается в лимит) :

+ открыть спойлер

[ 11.033347] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
[ 11.086745] systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; suse)
[ 11.306640] systemd[1]: Inserted module 'autofs4'
[ 11.313824] systemd[1]: Set hostname to .
[ 12.134946] systemd[1]: Starting Collect Read-Ahead Data...
[ 12.140055] systemd[1]: Starting Replay Read-Ahead Data...
[ 12.144979] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 12.145065] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.145101] systemd[1]: Starting System Time Synchronized.
[ 12.145250] systemd[1]: Reached target System Time Synchronized.
[ 12.145272] systemd[1]: Starting Remote File Systems.
[ 12.145426] systemd[1]: Reached target Remote File Systems.
[ 12.145483] systemd[1]: Starting Syslog Socket.
[ 12.145601] systemd[1]: Listening on Syslog Socket.
[ 12.145620] systemd[1]: Starting Delayed Shutdown Socket.
[ 12.145688] systemd[1]: Listening on Delayed Shutdown Socket.
[ 12.145698] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 12.145756] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 12.145792] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 12.145940] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.145957] systemd[1]: Starting Encrypted Volumes.
[ 12.145998] systemd[1]: Reached target Encrypted Volumes.
[ 12.146085] systemd[1]: Starting udev Kernel Socket.
[ 12.146147] systemd[1]: Listening on udev Kernel Socket.
[ 12.146200] systemd[1]: Starting udev Control Socket.
[ 12.146259] systemd[1]: Listening on udev Control Socket.
[ 12.146277] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dHitachi_HTS547575A9E384_J2140059F2HKYA\x2dpart8.device...
[ 12.146334] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dHitachi_HTS547575A9E384_J2140059F2HKYA\x2dpart2.device...
[ 12.146408] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dHitachi_HTS547575A9E384_J2140059F2HKYA\x2dpart6.device...
[ 12.146516] systemd[1]: Expecting device dev-sda11.device...
[ 12.146604] systemd[1]: Starting Journal Socket.
[ 12.146694] systemd[1]: Listening on Journal Socket.
[ 12.146722] systemd[1]: Starting LSB: Set default boot entry if called...
[ 12.150912] systemd[1]: Mounting Huge Pages File System...
[ 12.153886] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.157803] systemd-readahead[260]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 12.160893] systemd[1]: Starting Create dynamic rule for /dev/root link...
[ 12.165033] systemd[1]: Starting Journal Service...
[ 12.168978] systemd[1]: Started Journal Service.
[ 14.790409] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 16.359115] systemd-udevd[311]: starting version 195
[ 18.703569] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 18.754244] ACPI: AC Adapter [ACAD] (on-line)
[ 18.754383] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 18.754659] ACPI: Power Button [PWRB]
[ 18.754729] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 18.755142] ACPI: Lid Switch [LID]
[ 18.755218] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 18.755286] ACPI: Power Button [PWRF]
[ 3.183452] ACPI: Invalid Power Resource to register!
[ 18.804885] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 18.804895] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a6ac2f88), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 18.804910] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120913/ac-122)
[ 18.843525] acpi device:00: registered as cooling_device4
[ 18.843584] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 18.843665] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 18.845332] acpi device:06: registered as cooling_device5
[ 18.845398] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 18.845448] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input7
[ 18.855254] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 18.855264] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a6ac2f88), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 18.855280] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120913/ac-122)
[ 18.855710] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 18.855720] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a6ac2f88), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 18.855734] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120913/ac-122)
[ 18.906064] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 18.906074] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a6ac2f88), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 18.906083] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[ 18.906091] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120913/ac-122)
[ 18.909606] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 19.051198] wmi: Mapper loaded
[ 19.061131] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.061206] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 19.079995] microcode: CPU0: patch_level=0x06001116
[ 19.255924] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 19.255930] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 19.256123] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 19.303556] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 19.303565] ACPI: Battery Slot [BAT0] (battery present)
[ 19.348180] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20120913/utaddress-251)
[ 19.348188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.531710] Linux video capture interface: v2.00
[ 19.615361] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:e263)
[ 19.621145] input: HP TrueVision HD as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9
[ 19.621235] usbcore: registered new interface driver uvcvideo
[ 19.621237] USB Video Class driver (1.1.1)
[ 19.778638] hp_accel: laptop model unknown, using default axes configuration
[ 19.782451] lis3lv02d: 8 bits 3DC sensor found
[ 19.818128] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[ 19.818351] Registered led device: hp::hddprotect
[ 19.859639] AMD IOMMUv2 driver by Joerg Roedel
[ 19.859643] AMD IOMMUv2 functionality not available on this system
[ 19.868313] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 19.868318] Disabling lock debugging due to kernel taint
[ 19.882786] <6>[fglrx] Maximum main memory to use for locked dma buffers: 5185 MBytes.
[ 19.883047] <6>[fglrx] vendor: 1002 device: 9903 count: 1
[ 19.883409] <6>[fglrx] vendor: 1002 device: 6840 count: 2
[ 19.883663] <6>[fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 19.884100] <6>[fglrx] ioport: bar 4, base 0x3000, size: 0x100
[ 19.884108] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 19.884225] <6>[fglrx] Kernel PAT support is enabled
[ 19.884266] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 2 minors
[ 19.910787] ALSA hda_intel.c:2902 Using LPIB position fix
[ 19.910793] ALSA hda_intel.c:3019 Force to non-snoop mode
[ 19.910855] snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
[ 19.914839] ALSA hda_intel.c:1680 Enable sync_write for stable communication
[ 19.918851] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
[ 19.919138] ALSA hda_intel.c:2902 Using LPIB position fix
[ 19.926893] ALSA hda_intel.c:1680 Enable sync_write for stable communication
[ 19.932749] ALSA patch_sigmatel.c:5663 mute LED gpio 10 polarity 0
[ 19.932757] ALSA hda_auto_parser.c:318 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 19.932760] ALSA hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.932762] ALSA hda_auto_parser.c:326 hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 19.932764] ALSA hda_auto_parser.c:327 mono: mono_out=0x0
[ 19.932766] ALSA hda_auto_parser.c:331 inputs:
[ 19.932768] ALSA hda_auto_parser.c:335 Mic=0xc
[ 19.933030] ALSA patch_sigmatel.c:3145 stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
[ 19.933314] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12
[ 19.938610] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 19.938770] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 19.957753] input: HP WMI hotkeys as /devices/virtual/input/input15
[ 19.982729] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 19.982946] r8169 0000:05:00.0: irq 53 for MSI/MSI-X
[ 19.983150] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000050000, 28:92:4a:4b:1f:77, XID 00c00000 IRQ 53
[ 20.075045] microcode: CPU0: new patch_level=0x06001119
[ 20.075115] microcode: CPU1: patch_level=0x06001116
[ 20.075210] microcode: CPU2: patch_level=0x06001116
[ 20.084112] microcode: CPU2: new patch_level=0x06001119
[ 20.084171] microcode: CPU3: patch_level=0x06001116
[ 20.084271] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 20.093645] kvm: Nested Virtualization enabled
[ 20.093651] kvm: Nested Paging enabled
[ 20.094753] acpi-cpufreq: overriding BIOS provided _PSD data
[ 20.139644] cfg80211: Calling CRDA to update world regulatory domain
[ 20.142411] cfg80211: World regulatory domain updated:
[ 20.142416] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.142419] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.142422] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.142424] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.142426] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.142428] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.156047] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.156328] Registered led device: rt2800pci-phy0::radio
[ 20.156349] Registered led device: rt2800pci-phy0::assoc
[ 20.156368] Registered led device: rt2800pci-phy0::quality
[ 21.334396] fuse init (API version 7.20)
[ 21.482291] Adding 7167996k swap on /dev/sda8. Priority:-1 extents:1 across:7167996k
[ 24.561782] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 24.600951] systemd-journald[265]: Received SIGUSR1
[ 24.866671] vboxguest: PCI device not found, probably running on physical hardware.
[ 24.871072] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 24.883522] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 24.886856] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.260397] Bluetooth: Core ver 2.16
[ 25.260415] NET: Registered protocol family 31
[ 25.260417] Bluetooth: HCI device and connection manager initialized
[ 25.260426] Bluetooth: HCI socket layer initialized
[ 25.260429] Bluetooth: L2CAP socket layer initialized
[ 25.260438] Bluetooth: SCO socket layer initialized
[ 25.263198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.263203] Bluetooth: BNEP filters: protocol multicast
[ 25.263215] Bluetooth: BNEP socket layer initialized
[ 25.353316] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.573810] r8169 0000:05:00.0 eth0: link down
[ 25.573871] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.582279] NET: Registered protocol family 17
[ 26.129489] fglrx_pci 0000:00:01.0: irq 54 for MSI/MSI-X
[ 26.130103] <6>[fglrx] Firegl kernel thread PID: 946
[ 26.130208] <6>[fglrx] Firegl kernel thread PID: 947
[ 26.130304] <6>[fglrx] Firegl kernel thread PID: 948
[ 26.130399] <6>[fglrx] IRQ 54 Enabled
[ 26.134417] <6>[fglrx] Gart USWC size:1280 M.
[ 26.134420] <6>[fglrx] Gart cacheable size:508 M.
[ 26.134424] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 26.134427] <6>[fglrx] Reserved FB block: Unshared offset:fbfc000, size:404000
[ 26.134429] <6>[fglrx] Reserved FB block: Unshared offset:1ffee000, size:12000
[ 26.184982] vgaarb: this pci device is not a vga device
[ 26.185048] vgaarb: this pci device is not a vga device
[ 26.185080] vgaarb: this pci device is not a vga device
[ 26.185112] vgaarb: this pci device is not a vga device
[ 26.185143] vgaarb: this pci device is not a vga device
[ 26.185176] vgaarb: this pci device is not a vga device
[ 26.185208] vgaarb: this pci device is not a vga device
[ 26.185240] vgaarb: this pci device is not a vga device
[ 26.185273] vgaarb: this pci device is not a vga device
[ 26.185306] vgaarb: this pci device is not a vga device
[ 26.185341] vgaarb: this pci device is not a vga device
[ 26.185374] vgaarb: this pci device is not a vga device
[ 26.185409] vgaarb: this pci device is not a vga device
[ 26.185444] vgaarb: this pci device is not a vga device
[ 26.185479] vgaarb: this pci device is not a vga device
[ 26.185515] vgaarb: this pci device is not a vga device
[ 26.185552] vgaarb: this pci device is not a vga device
[ 26.185589] vgaarb: this pci device is not a vga device
[ 26.185719] vgaarb: this pci device is not a vga device
[ 26.185768] vgaarb: this pci device is not a vga device
[ 26.185830] vgaarb: this pci device is not a vga device
[ 26.185872] vgaarb: this pci device is not a vga device
[ 26.185913] vgaarb: this pci device is not a vga device
[ 26.185990] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 26.186061] vgaarb: this pci device is not a vga device
[ 26.186104] vgaarb: this pci device is not a vga device
[ 26.186149] vgaarb: this pci device is not a vga device
[ 26.186193] vgaarb: this pci device is not a vga device
[ 26.830898] fglrx_pci 0000:01:00.0: irq 55 for MSI/MSI-X
[ 26.831613] <6>[fglrx] Firegl kernel thread PID: 953
[ 26.831706] <6>[fglrx] Firegl kernel thread PID: 954
[ 26.831845] <6>[fglrx] Firegl kernel thread PID: 955
[ 26.832030] <6>[fglrx] IRQ 55 Enabled
[ 26.886436] <6>[fglrx] Gart USWC size:1280 M.
[ 26.886439] <6>[fglrx] Gart cacheable size:508 M.
[ 26.886443] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 26.886446] <6>[fglrx] Reserved FB block: Unshared offset:f8fc000, size:404000
[ 26.886448] <6>[fglrx] Reserved FB block: Unshared offset:7fff4000, size:c000
[ 26.915069] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 27.097540] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 42.588045] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 42.721549] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 70.182943] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 70.846915] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 81.234148] wlan0: authenticate with 90:f6:52:bc:30:58
[ 81.237357] wlan0: send auth to 90:f6:52:bc:30:58 (try 1/3)
[ 81.239319] wlan0: authenticated
[ 81.239461] rt2800pci 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 81.240079] wlan0: associate with 90:f6:52:bc:30:58 (try 1/3)
[ 81.243594] wlan0: RX AssocResp from 90:f6:52:bc:30:58 (capab=0x431 status=0 aid=1)
[ 81.243884] wlan0: associated
[ 81.243937] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 81.244142] cfg80211: Calling CRDA for country: RU
[ 81.247229] cfg80211: Regulatory domain changed to country: RU
[ 81.247234] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 81.247237] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 81.247239] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 83.212349] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 83.319109] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 83.351302] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
[ 83.568690] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 83.818963] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 101.808386] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 114.175980] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 146.134588] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 210.048446] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 337.838566] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 593.414282] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1104.551942] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1438.654478] wlan0: deauthenticating from 90:f6:52:bc:30:58 by local choice (reason=3)
[ 1438.668014] cfg80211: Calling CRDA to update world regulatory domain
[ 1438.672203] cfg80211: World regulatory domain updated:
[ 1438.672208] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1438.672210] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1438.672212] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1438.672214] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1438.672216] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1438.672218] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1442.379190] PM: Syncing filesystems ... done.
[ 1442.676558] PM: Preparing system for mem sleep
[ 1442.677450] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1442.689993] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1442.700912] PM: Entering mem sleep
[ 1442.700981] Suspending console(s) (use no_console_suspend to debug)
[ 1442.701658] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1442.711491] sd 0:0:0:0: [sda] Stopping disk
[ 1442.783942] i8042 aux 00:08: wake-up capability disabled by ACPI
[ 1442.784151] i8042 kbd 00:07: wake-up capability enabled by ACPI
[ 1442.797479] <6>[fglrx] IRQ 55 Disabled
[ 1442.797568] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 1443.244179] <6>[fglrx] Suspending fglrx in kernel completed.
[ 1443.244180] <6>[fglrx] Power down the ASIC .
[ 1443.244652] <6>[fglrx] IRQ 54 Disabled
[ 1443.244678] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 1443.523342] <6>[fglrx] Suspending fglrx in kernel completed.
[ 1443.523343] <6>[fglrx] Power down the ASIC .
[ 1444.260191] PM: suspend of devices complete after 1561.783 msecs
[ 1444.260410] PM: late suspend of devices complete after 0.217 msecs
[ 1444.265091] pcieport 0000:00:15.1: wake-up capability enabled by ACPI
[ 1444.276295] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 1444.287046] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 1444.287076] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 1444.298027] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 1444.298076] xhci_hcd 0000:00:10.1: wake-up capability enabled by ACPI
[ 1444.309034] xhci_hcd 0000:00:10.0: wake-up capability enabled by ACPI
[ 1444.320020] PM: noirq suspend of devices complete after 59.710 msecs
[ 1444.320111] ACPI: Preparing to enter system sleep state S3
[ 1444.395122] PM: Saving platform NVS memory
[ 1444.399070] Disabling non-boot CPUs ...
[ 1444.400870] smpboot: CPU 1 is now offline
[ 1444.403004] smpboot: CPU 2 is now offline
[ 1444.404865] smpboot: CPU 3 is now offline
[ 1444.405671] ACPI: Low-level resume complete
[ 1444.405731] PM: Restoring platform NVS memory
[ 1444.406468] LVT offset 0 assigned for vector 0xf9
[ 1444.413906] microcode: CPU0: new patch_level=0x06001119
[ 1444.413967] Enabling non-boot CPUs ...
[ 1444.415119] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 1444.426199] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 1444.426200] perf: IBS APIC setup failed on cpu #1
[ 1444.428646] CPU1 is up
[ 1444.428794] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 1444.439881] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 1444.439882] perf: IBS APIC setup failed on cpu #2
[ 1444.451158] microcode: CPU2: new patch_level=0x06001119
[ 1444.451224] CPU2 is up
[ 1444.452601] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 1444.463693] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 1444.463694] perf: IBS APIC setup failed on cpu #3
[ 1444.466262] CPU3 is up
[ 1444.468078] ACPI: Waking up from system sleep state S3
[ 1444.760383] xhci_hcd 0000:00:10.0: wake-up capability disabled by ACPI
[ 1444.771382] xhci_hcd 0000:00:10.1: wake-up capability disabled by ACPI
[ 1444.771443] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 1444.782307] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 1444.782336] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 1444.793312] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 1444.828365] PM: noirq resume of devices complete after 90.090 msecs
[ 1444.828590] PM: early resume of devices complete after 0.143 msecs
[ 1444.828868] snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
[ 1444.830242] pcieport 0000:00:15.1: wake-up capability disabled by ACPI
[ 1444.834462] <6>[fglrx] Power up the ASIC
[ 1444.834475] <6>[fglrx] Preparing resume fglrx in kernel.
[ 1444.842192] <6>[fglrx] Resuming fglrx in kernel completed.
[ 1444.842246] <6>[fglrx] IRQ 54 Enabled
[ 1444.901757] <6>[fglrx] Power up the ASIC
[ 1444.901828] <6>[fglrx] Preparing resume fglrx in kernel.
[ 1444.911408] <6>[fglrx] Resuming fglrx in kernel completed.
[ 1444.911458] <6>[fglrx] IRQ 55 Enabled
[ 1445.092764] usb 1-3: reset high-speed USB device number 3 using ehci_hcd
[ 1445.133663] ata2: SATA link down (SStatus 0 SControl 300)
[ 1445.170015] i8042 kbd 00:07: wake-up capability disabled by ACPI
[ 1450.279702] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1450.283265] ata1.00: configured for UDMA/100
[ 1450.294681] sd 0:0:0:0: [sda] Starting disk
[ 1450.429318] ata2: SATA link down (SStatus 0 SControl 300)
[ 1450.429326] ata2: limiting SATA link speed to 1.5 Gbps
[ 1455.724935] ata2: SATA link down (SStatus 0 SControl 310)
[ 1455.724942] ata2.00: disabled
[ 1455.736252] ata2.00: detaching (SCSI 1:0:0:0)
[ 1455.760098] PM: resume of devices complete after 10950.873 msecs
[ 1455.771079] PM: Finishing wakeup.
[ 1455.771081] Restarting tasks ... done.
[ 1455.803544] video LNXVIDEO:00: Restoring backlight state
[ 1455.815279] video LNXVIDEO:01: Restoring backlight state
[ 1456.125722] ndiswrapper version 1.58rc1 loaded (smp=yes, preempt=yes)
[ 1456.164174] usbcore: registered new interface driver ndiswrapper
[ 1456.192118] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1456.380718] r8169 0000:05:00.0 eth0: link down
[ 1456.380800] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1462.175059] wlan0: authenticate with 90:f6:52:bc:30:58
[ 1462.178521] wlan0: send auth to 90:f6:52:bc:30:58 (try 1/3)
[ 1462.180402] wlan0: authenticated
[ 1462.180549] rt2800pci 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 1462.181439] wlan0: associate with 90:f6:52:bc:30:58 (try 1/3)
[ 1462.184022] wlan0: RX AssocResp from 90:f6:52:bc:30:58 (capab=0x431 status=0 aid=1)
[ 1462.184301] wlan0: associated
[ 1462.184349] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1462.184434] cfg80211: Calling CRDA for country: RU
[ 1462.187974] cfg80211: Regulatory domain changed to country: RU
[ 1462.187980] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1462.187983] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1462.187985] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 1463.419912] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1463.599637] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 1463.662071] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
[ 1463.849499] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 1464.100342] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 1494.371362] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1526.316092] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1590.204174] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1717.979060] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1973.527429] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 2484.622989] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 2801.733256] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2802.733047] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2804.731890] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2806.727412] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2807.725503] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2846.665821] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2847.665765] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2886.602878] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2887.602929] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3196.061592] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3197.061485] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3199.060691] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3201.055199] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3202.054759] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3505.520644] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3506.519616] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3506.812046] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 3508.518311] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3510.514769] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3819.973330] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3820.973312] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3822.972416] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3824.967097] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3825.966906] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 4334.846609] wlan0: deauthenticating from 90:f6:52:bc:30:58 by local choice (reason=3)
[ 4334.859551] cfg80211: Calling CRDA to update world regulatory domain
[ 4334.864331] cfg80211: World regulatory domain updated:
[ 4334.864336] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4334.864340] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4334.864342] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4334.864345] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4334.864348] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4334.864350] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4338.307108] PM: Syncing filesystems ... done.
[ 4338.435561] PM: Preparing system for mem sleep
[ 4338.436127] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 4338.447963] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 4338.458897] PM: Entering mem sleep
[ 4338.458970] Suspending console(s) (use no_console_suspend to debug)
[ 4338.459622] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4338.519609] i8042 aux 00:08: wake-up capability disabled by ACPI
[ 4338.519633] i8042 kbd 00:07: wake-up capability enabled by ACPI
[ 4338.534985] <6>[fglrx] IRQ 55 Disabled
[ 4338.535047] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 4338.535744] sd 0:0:0:0: [sda] Stopping disk
[ 4338.991075] <6>[fglrx] Suspending fglrx in kernel completed.
[ 4338.991076] <6>[fglrx] Power down the ASIC .
[ 4338.991470] <6>[fglrx] IRQ 54 Disabled
[ 4338.991478] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 4339.265597] <6>[fglrx] Suspending fglrx in kernel completed.
[ 4339.265598] <6>[fglrx] Power down the ASIC .
[ 4340.134152] PM: suspend of devices complete after 1677.952 msecs
[ 4340.134366] PM: late suspend of devices complete after 0.211 msecs
[ 4340.139905] pcieport 0000:00:15.1: wake-up capability enabled by ACPI
[ 4340.151156] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 4340.161859] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 4340.161889] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 4340.172840] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 4340.172890] xhci_hcd 0000:00:10.1: wake-up capability enabled by ACPI
[ 4340.183847] xhci_hcd 0000:00:10.0: wake-up capability enabled by ACPI
[ 4340.194865] PM: noirq suspend of devices complete after 60.601 msecs
[ 4340.194957] ACPI: Preparing to enter system sleep state S3
[ 4340.268942] PM: Saving platform NVS memory
[ 4340.273004] Disabling non-boot CPUs ...
[ 4340.274757] smpboot: CPU 1 is now offline
[ 4340.276632] smpboot: CPU 2 is now offline
[ 4340.278664] smpboot: CPU 3 is now offline
[ 4340.279427] ACPI: Low-level resume complete
[ 4340.279484] PM: Restoring platform NVS memory
[ 4340.280189] LVT offset 0 assigned for vector 0xf9
[ 4340.289234] microcode: CPU0: new patch_level=0x06001119
[ 4340.289289] Enabling non-boot CPUs ...
[ 4340.290570] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 4340.301651] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 4340.301652] perf: IBS APIC setup failed on cpu #1
[ 4340.304146] CPU1 is up
[ 4340.304292] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 4340.315381] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 4340.315383] perf: IBS APIC setup failed on cpu #2
[ 4340.326686] microcode: CPU2: new patch_level=0x06001119
[ 4340.326755] CPU2 is up
[ 4340.328117] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 4340.339201] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 4340.339202] perf: IBS APIC setup failed on cpu #3
[ 4340.341815] CPU3 is up
[ 4340.343552] ACPI: Waking up from system sleep state S3
[ 4340.636166] xhci_hcd 0000:00:10.0: wake-up capability disabled by ACPI
[ 4340.647151] xhci_hcd 0000:00:10.1: wake-up capability disabled by ACPI
[ 4340.647211] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 4340.658095] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 4340.658121] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 4340.669059] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 4340.704144] PM: noirq resume of devices complete after 90.110 msecs
[ 4340.704362] PM: early resume of devices complete after 0.151 msecs
[ 4340.704578] snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
[ 4340.705969] pcieport 0000:00:15.1: wake-up capability disabled by ACPI
[ 4340.710658] <6>[fglrx] Power up the ASIC
[ 4340.710670] <6>[fglrx] Preparing resume fglrx in kernel.
[ 4340.718654] <6>[fglrx] Resuming fglrx in kernel completed.
[ 4340.718701] <6>[fglrx] IRQ 54 Enabled
[ 4340.781833] <6>[fglrx] Power up the ASIC
[ 4340.781901] <6>[fglrx] Preparing resume fglrx in kernel.
[ 4340.791341] <6>[fglrx] Resuming fglrx in kernel completed.
[ 4340.791392] <6>[fglrx] IRQ 55 Enabled
[ 4340.968525] usb 1-3: reset high-speed USB device number 3 using ehci_hcd
[ 4341.009466] ata2: SATA link down (SStatus 0 SControl 310)
[ 4341.051192] i8042 kbd 00:07: wake-up capability disabled by ACPI
[ 4342.844215] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4342.847953] ata1.00: configured for UDMA/100
[ 4342.859321] sd 0:0:0:0: [sda] Starting disk
[ 4342.883086] PM: resume of devices complete after 2182.579 msecs
[ 4342.883359] PM: Finishing wakeup.
[ 4342.883360] Restarting tasks ... done.
[ 4342.892572] video LNXVIDEO:00: Restoring backlight state
[ 4342.893613] video LNXVIDEO:01: Restoring backlight state
[ 4343.128632] usbcore: deregistering interface driver ndiswrapper
[ 4343.133052] ndiswrapper version 1.58rc1 loaded (smp=yes, preempt=yes)
[ 4343.148597] usbcore: registered new interface driver ndiswrapper
[ 4343.173724] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4343.361296] r8169 0000:05:00.0 eth0: link down
[ 4343.361344] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4348.731222] wlan0: authenticate with 90:f6:52:bc:30:58
[ 4348.734719] wlan0: send auth to 90:f6:52:bc:30:58 (try 1/3)
[ 4348.736651] wlan0: authenticated
[ 4348.736934] rt2800pci 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 4348.737640] wlan0: associate with 90:f6:52:bc:30:58 (try 1/3)
[ 4348.740052] wlan0: RX AssocResp from 90:f6:52:bc:30:58 (capab=0x431 status=0 aid=1)
[ 4348.740362] wlan0: associated
[ 4348.740406] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4348.740570] cfg80211: Calling CRDA for country: RU
[ 4348.743524] cfg80211: Regulatory domain changed to country: RU
[ 4348.743589] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4348.743593] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4348.743608] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 4349.993952] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4350.148853] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 4350.200629] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
[ 4350.399140] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 4350.648755] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 4380.944678] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4412.889342] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4476.777206] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4604.552362] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4719.265395] usb 7-1: new high-speed USB device number 2 using xhci_hcd
[ 4719.284305] usb 7-1: New USB device found, idVendor=0718, idProduct=070a
[ 4719.284313] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4719.284318] usb 7-1: Product: TF10
[ 4719.284322] usb 7-1: Manufacturer: TDK LoR
[ 4719.284325] usb 7-1: SerialNumber: 0707274196D75F22
[ 4719.335141] Initializing USB Mass Storage driver...
[ 4719.335390] scsi2 : usb-storage 7-1:1.0
[ 4719.335534] usbcore: registered new interface driver usb-storage
[ 4719.335537] USB Mass Storage support registered.
[ 4720.420216] scsi 2:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4720.421440] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4721.805966] sd 2:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4721.806282] sd 2:0:0:0: [sdb] Write Protect is off
[ 4721.806292] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4721.806521] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4721.806526] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4721.808317] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4721.808326] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4721.828723] sdb: sdb1
[ 4721.830035] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4721.830041] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4721.830046] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 4728.927258] Btrfs loaded
[ 4728.989847] JFS: nTxBlock = 8192, nTxLock = 65536
[ 4729.017099] NILFS version 2 loaded
[ 4729.069336] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 4730.635739] device-mapper: uevent: version 1.0.3
[ 4730.635908] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 4768.336117] usb 7-1: USB disconnect, device number 2
[ 4769.738734] usb 7-1: new high-speed USB device number 3 using xhci_hcd
[ 4769.757726] usb 7-1: New USB device found, idVendor=0718, idProduct=070a
[ 4769.757734] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4769.757739] usb 7-1: Product: TF10
[ 4769.757742] usb 7-1: Manufacturer: TDK LoR
[ 4769.757746] usb 7-1: SerialNumber: 0707274196D75F22
[ 4769.760056] scsi3 : usb-storage 7-1:1.0
[ 4770.842340] scsi 3:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4770.842746] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 4772.221944] sd 3:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4772.222229] sd 3:0:0:0: [sdb] Write Protect is off
[ 4772.222241] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4772.222631] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.222640] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.224936] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.224942] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.245533] sdb: sdb1
[ 4772.246872] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.246879] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.246885] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 4773.468301] usb 7-1: USB disconnect, device number 3
[ 4775.720077] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[ 4775.739103] usb 5-2: New USB device found, idVendor=0718, idProduct=070a
[ 4775.739111] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4775.739116] usb 5-2: Product: TF10
[ 4775.739120] usb 5-2: Manufacturer: TDK LoR
[ 4775.739123] usb 5-2: SerialNumber: 0707274196D75F22
[ 4775.741519] scsi4 : usb-storage 5-2:1.0
[ 4776.823643] scsi 4:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4776.824832] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4778.203299] sd 4:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4778.203480] sd 4:0:0:0: [sdb] Write Protect is off
[ 4778.203485] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4778.203655] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.203662] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.205456] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.205460] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.225847] sdb: sdb1
[ 4778.227218] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.227226] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.227232] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4860.100612] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 5371.196140] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 6125.125322] usb 5-2: USB disconnect, device number 2
[ 6157.742101] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6158.742052] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6160.741202] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6162.736377] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6163.735351] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6393.386906] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 6933.700373] wlan0: deauthenticating from 90:f6:52:bc:30:58 by local choice (reason=3)
[ 6933.713461] cfg80211: Calling CRDA to update world regulatory domain
[ 6933.717736] cfg80211: World regulatory domain updated:
[ 6933.717742] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6933.717745] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6933.717748] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6933.717752] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6933.717754] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6933.717757] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6937.079271] PM: Syncing filesystems ... done.
[ 6937.291591] PM: Preparing system for mem sleep
[ 6937.292080] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6937.304159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6937.315071] PM: Entering mem sleep
[ 6937.315143] Suspending console(s) (use no_console_suspend to debug)
[ 6937.315816] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6937.375455] i8042 aux 00:08: wake-up capability disabled by ACPI
[ 6937.375480] i8042 kbd 00:07: wake-up capability enabled by ACPI
[ 6937.390950] <6>[fglrx] IRQ 55 Disabled
[ 6937.391035] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 6937.416365] sd 0:0:0:0: [sda] Stopping disk
[ 6937.842332] <6>[fglrx] Suspending fglrx in kernel completed.
[ 6937.842333] <6>[fglrx] Power down the ASIC .
[ 6937.842861] <6>[fglrx] IRQ 54 Disabled
[ 6937.842870] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 6938.117584] <6>[fglrx] Suspending fglrx in kernel completed.
[ 6938.117585] <6>[fglrx] Power down the ASIC .
[ 6939.525199] PM: suspend of devices complete after 2213.771 msecs
[ 6939.525420] PM: late suspend of devices complete after 0.218 msecs
[ 6939.530025] pcieport 0000:00:15.1: wake-up capability enabled by ACPI
[ 6939.541292] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 6939.551992] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 6939.552021] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 6939.562966] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 6939.563016] xhci_hcd 0000:00:10.1: wake-up capability enabled by ACPI
[ 6939.573977] xhci_hcd 0000:00:10.0: wake-up capability enabled by ACPI
[ 6939.584998] PM: noirq suspend of devices complete after 59.679 msecs
[ 6939.585090] ACPI: Preparing to enter system sleep state S3
[ 6939.620600] PM: Saving platform NVS memory
[ 6939.624602] Disabling non-boot CPUs ...
[ 6939.626397] smpboot: CPU 1 is now offline
[ 6939.628666] smpboot: CPU 2 is now offline
[ 6939.630608] smpboot: CPU 3 is now offline
[ 6939.631399] ACPI: Low-level resume complete
[ 6939.631461] PM: Restoring platform NVS memory
[ 6939.632209] LVT offset 0 assigned for vector 0xf9
[ 6939.641250] microcode: CPU0: new patch_level=0x06001119
[ 6939.641306] Enabling non-boot CPUs ...
[ 6939.642605] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 6939.653684] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 6939.653686] perf: IBS APIC setup failed on cpu #1
[ 6939.656151] CPU1 is up
[ 6939.656316] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 6939.667405] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 6939.667406] perf: IBS APIC setup failed on cpu #2
[ 6939.678756] microcode: CPU2: new patch_level=0x06001119
[ 6939.678839] CPU2 is up
[ 6939.679007] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 6939.690080] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 6939.690081] perf: IBS APIC setup failed on cpu #3
[ 6939.692499] CPU3 is up
[ 6939.694366] ACPI: Waking up from system sleep state S3
[ 6939.990421] xhci_hcd 0000:00:10.0: wake-up capability disabled by ACPI
[ 6940.001401] xhci_hcd 0000:00:10.1: wake-up capability disabled by ACPI
[ 6940.001462] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 6940.012345] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 6940.012372] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 6940.023330] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 6940.058397] PM: noirq resume of devices complete after 90.099 msecs
[ 6940.058620] PM: early resume of devices complete after 0.156 msecs
[ 6940.058883] snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
[ 6940.060240] pcieport 0000:00:15.1: wake-up capability disabled by ACPI
[ 6940.064615] <6>[fglrx] Power up the ASIC
[ 6940.064626] <6>[fglrx] Preparing resume fglrx in kernel.
[ 6940.072442] <6>[fglrx] Resuming fglrx in kernel completed.
[ 6940.072497] <6>[fglrx] IRQ 54 Enabled
[ 6940.134778] <6>[fglrx] Power up the ASIC
[ 6940.134849] <6>[fglrx] Preparing resume fglrx in kernel.
[ 6940.144434] <6>[fglrx] Resuming fglrx in kernel completed.
[ 6940.144486] <6>[fglrx] IRQ 55 Enabled
[ 6940.322783] usb 1-3: reset high-speed USB device number 3 using ehci_hcd
[ 6940.363712] ata2: SATA link down (SStatus 0 SControl 310)
[ 6940.402797] i8042 kbd 00:07: wake-up capability disabled by ACPI
[ 6942.198467] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6942.202337] ata1.00: configured for UDMA/100
[ 6942.213571] sd 0:0:0:0: [sda] Starting disk
[ 6942.237465] PM: resume of devices complete after 2182.700 msecs
[ 6942.237779] PM: Finishing wakeup.
[ 6942.237780] Restarting tasks ... done.
[ 6942.249233] video LNXVIDEO:00: Restoring backlight state
[ 6942.250634] video LNXVIDEO:01: Restoring backlight state
[ 6942.577161] usbcore: deregistering interface driver ndiswrapper
[ 6942.581283] ndiswrapper version 1.58rc1 loaded (smp=yes, preempt=yes)
[ 6942.590253] usbcore: registered new interface driver ndiswrapper
[ 6942.615968] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6942.804132] r8169 0000:05:00.0 eth0: link down
[ 6942.804307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6948.636591] wlan0: authenticate with 90:f6:52:bc:30:58
[ 6948.640012] wlan0: send auth to 90:f6:52:bc:30:58 (try 1/3)
[ 6948.641906] wlan0: authenticated
[ 6948.642203] rt2800pci 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 6948.642911] wlan0: associate with 90:f6:52:bc:30:58 (try 1/3)
[ 6948.645259] wlan0: RX AssocResp from 90:f6:52:bc:30:58 (capab=0x431 status=0 aid=1)
[ 6948.645552] wlan0: associated
[ 6948.645605] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6948.645804] cfg80211: Calling CRDA for country: RU
[ 6948.650241] cfg80211: Regulatory domain changed to country: RU
[ 6948.650245] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6948.650247] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 6948.650249] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 6950.263985] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 6950.331631] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 6950.348943] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
[ 6950.581568] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 6950.832329] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 6981.216413] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 7013.160688] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 7077.048803] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 7204.848961] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44