# Generated by ISPmanager install script. Original file saved to var/ibackup/etc/sysconfig/iptables.0.orig
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:ISPMGR - [0:0]
-A INPUT -j ISPMGR
-A OUTPUT -j ISPMGR
COMMIT
# Completed on Tue August 28 21:05:03 2012

# Configuration file for system-config-firewall

--disabled

#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# Don't give away too much information about all the subcomponents
# we are running.  Comment out this line if you don't mind remote sites
# finding out what major optional modules you are running
ServerTokens OS

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"

#
# PidFile: The file in which the server should record its process
# identification number when it starts.  Note the PIDFILE variable in
# /etc/sysconfig/httpd must be set appropriately if this location is
# changed.
#
PidFile run/httpd.pid

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 60

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive Off

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
## 

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# ServerLimit: maximum value for MaxClients for the lifetime of the server
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers       8
MinSpareServers    5
MaxSpareServers   20
ServerLimit      256
MaxClients       256
MaxRequestsPerChild  4000
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers         4
MaxClients         300
MinSpareThreads     25
MaxSpareThreads     75 
ThreadsPerChild     25
MaxRequestsPerChild  0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule version_module modules/mod_version.so

#
# The following modules are not loaded by default:
#
#LoadModule asis_module modules/mod_asis.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#

#
# Load config files from the config directory "/etc/httpd/conf.d".
#
Include conf.d/*.conf

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000; 
#  don't use Group #-1 on these systems!
#
User apache
Group apache

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin root@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make 
# redirections work in a sensible way.
#
#ServerName www.example.com:80

#
# UseCanonicalName: Determines how Apache constructs self-referencing 
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/var/www/html">

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
    Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid.  This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
#
<IfModule mod_userdir.c>
    #
    # UserDir is disabled by default since it can confirm the presence
    # of a username on the system (depending on home directory
    # permissions).
    #
    UserDir disabled

    #
    # To enable requests to /~user/ to serve the user's public_html
    # directory, remove the "UserDir disabled" line above, and uncomment
    # the following line instead:
    # 
    #UserDir public_html

</IfModule>

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the 
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.html.var

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
#   MIMEMagicFile /usr/share/magic.mime
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted 
# filesystems.  On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
#
#EnableMMAP off

#
# EnableSendfile: Control whether the sendfile kernel support is 
# used to deliver files (assuming that the OS supports it). 
# The default is on; turn this off if you serve from NFS-mounted 
# filesystems.  Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile
#
#EnableSendfile off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this
# requires the mod_logio module to be loaded.
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog logs/access_log common

#
# If you would like to have separate agent and referer logfiles, uncomment
# the following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

#
# For a single logfile with access, agent, and referer information
# (Combined Logfile Format), use the following directive:
#
CustomLog logs/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is 
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the 
# realname must also be slash terminated, and if the fakename omits the 
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/var/www/icons/"

<Directory "/var/www/icons">
    Options Indexes MultiViews FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

#
# WebDAV module configuration section.
# 
<IfModule mod_dav_fs.c>
    # Location of the WebDAV lock database.
    DAVLockDB /var/lib/dav/lockdb
</IfModule>

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Directives controlling the display of server-generated directory listings.
#

#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes. 
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# DefaultLanguage and AddLanguage allows you to specify the language of 
# a document. You can then use content negotiation to give a browser a 
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will 
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as 
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases 
# the two character 'Language' abbreviation is not identical to 
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
#
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback

#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default.  To use the 
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8

#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#AddType application/x-tar .tgz

#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz

# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
#   MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl    .crl

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
#  to be distributed in multiple languages.)
#
AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use 
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /var/www/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#

Alias /error/ "/var/www/error/"

<IfModule mod_negotiation.c>
<IfModule mod_include.c>
    <Directory "/var/www/error">
        AllowOverride None
        Options IncludesNoExec
        AddOutputFilter Includes html
        AddHandler type-map var
        Order allow,deny
        Allow from all
        LanguagePriority en es de fr
        ForceLanguagePriority Prefer Fallback
    </Directory>
<Directory /var/www/*/data/>
    php_admin_flag engine off
</Directory>

#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

</IfModule>
</IfModule>

#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash.  This fixes a 
# problem with Microsoft WebFolders which does not appropriately handle 
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully

#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Location>

#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Proxy *>
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Proxy>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable a cache of proxied content, uncomment the following lines.
# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details.
#
#<IfModule mod_disk_cache.c>
#   CacheEnable disk /
#   CacheRoot "/var/cache/mod_proxy"
#</IfModule>
#

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80
#
# NOTE: NameVirtualHost cannot be used without a port specifier 
# (e.g. :80) if mod_ssl is being used, due to the nature of the
# SSL protocol.
#

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog logs/dummy-host.example.com-error_log
#    CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
Include /usr/local/ispmgr/etc/ispmgr.inc
Include /usr/local/ispmgr/etc/wwwdomainonoff.inc

<Directory /var/www/homstudio/data/www/latinos.org.ua>
    Options +ExecCGI -Includes
    php_admin_value open_basedir "/var/www/homstudio/data:."
    php_admin_flag engine on
</Directory>

<Directory /var/www/lion-studio/data/www/lion-studio.net>
    Options +ExecCGI +Includes
    php_admin_value open_basedir "/var/www/lion-studio/data:."
    php_admin_flag engine on
</Directory>

NameVirtualHost 193.0.61.241:80
NameVirtualHost 193.0.61.241:443
NameVirtualHost 193.0.61.240:80
 
<VirtualHost 193.0.61.241:80 >
    ServerName lion-studio.net
    CustomLog /var/www/httpd-logs/lion-studio.net.access.log combined
    DocumentRoot /var/www/lion-studio/data/www/lion-studio.net
    ErrorLog /var/www/httpd-logs/lion-studio.net.error.log
    ServerAdmin webmaster@lion-studio.net
    ServerAlias www.lion-studio.net
    SuexecUserGroup lion-studio lion-studio
    AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml
    AddType application/x-httpd-php-source .phps
    php_admin_value open_basedir "/var/www/lion-studio/data:."
    php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f webmaster@lion-studio.net"
    php_admin_value upload_tmp_dir "/var/www/lion-studio/data/mod-tmp"
    php_admin_value session.save_path "/var/www/lion-studio/data/mod-tmp"
    ScriptAlias /cgi-bin/ /var/www/lion-studio/data/www/lion-studio.net/cgi-bin/
    AddDefaultCharset CP1251
</VirtualHost>


<VirtualHost 193.0.61.240:80 >
    ServerName latinos.org.ua
    CustomLog /var/www/httpd-logs/latinos.org.ua.access.log combined
    DocumentRoot /var/www/homstudio/data/www/latinos.org.ua
    ErrorLog /var/www/httpd-logs/latinos.org.ua.error.log
    ServerAdmin webmaster@h-s.org.ua
    ServerAlias www.latinos.org.ua
    SuexecUserGroup homstudio homstudio
    AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml
    AddType application/x-httpd-php-source .phps
    php_admin_value open_basedir "/var/www/homstudio/data:."
    php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f webmaster@h-s.org.ua"
    php_admin_value upload_tmp_dir "/var/www/homstudio/data/mod-tmp"
    php_admin_value session.save_path "/var/www/homstudio/data/mod-tmp"
    ScriptAlias /cgi-bin/ /var/www/homstudio/data/www/latinos.org.ua/cgi-bin/
    AddDefaultCharset UTF-8
</VirtualHost>

Sep 12 00:19:05 homestudio init: tty (/dev/tty1) main process (1700) killed by TERM signal
Sep 12 00:19:05 homestudio init: tty (/dev/tty2) main process (1702) killed by TERM signal
Sep 12 00:19:05 homestudio init: tty (/dev/tty3) main process (1704) killed by TERM signal
Sep 12 00:19:05 homestudio init: tty (/dev/tty4) main process (1706) killed by TERM signal
Sep 12 00:19:05 homestudio init: tty (/dev/tty5) main process (1708) killed by TERM signal
Sep 12 00:19:05 homestudio init: tty (/dev/tty6) main process (1710) killed by TERM signal
Sep 12 00:19:07 homestudio abrtd: Got signal 15, exiting
Sep 12 00:19:07 homestudio proftpd[1627]: 193.0.61.240 - ProFTPD killed (signal 15)
Sep 12 00:19:07 homestudio proftpd[1627]: 193.0.61.240 - ProFTPD 1.3.4a standalone mode SHUTDOWN
Sep 12 00:19:11 homestudio acpid: exiting
Sep 12 00:19:12 homestudio ntpd[1356]: ntpd exiting on signal 15
Sep 12 00:19:12 homestudio init: Disconnected from system bus
Sep 12 00:19:12 homestudio named[1166]: shutting down
Sep 12 00:19:12 homestudio named[1166]: no longer listening on 127.0.0.1#53
Sep 12 00:19:12 homestudio named[1166]: no longer listening on 193.0.61.240#53
Sep 12 00:19:12 homestudio named[1166]: no longer listening on 193.0.61.241#53
Sep 12 00:19:12 homestudio named[1166]: exiting
Sep 12 00:19:14 homestudio auditd[1787]: The audit daemon is exiting.
Sep 12 00:19:14 homestudio kernel: type=1305 audit(1378930754.283:18185): audit_pid=0 old=1787 auid=4294967295 ses=4294967295 res=1
Sep 12 00:19:14 homestudio kernel: type=1305 audit(1378930754.382:18186): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
Sep 12 00:19:14 homestudio kernel: Kernel logging (proc) stopped.
Sep 12 00:19:14 homestudio rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1128" x-info="http://www.rsyslog.com"] exiting on signal 15.
Sep 12 00:19:33 homestudio kernel: imklog 5.8.10, log source = /proc/kmsg started.
Sep 12 00:19:33 homestudio rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1117" x-info="http://www.rsyslog.com"] start
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys cpuset
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys cpu
Sep 12 00:19:33 homestudio kernel: Linux version 2.6.32-279.5.2.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Fri Aug 24 01:07:11 UTC 2012
Sep 12 00:19:33 homestudio kernel: Command line: ro root=UUID=3e774e9e-1a73-41ec-8572-0303ee2e4cad rd_NO_LUKS  KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_NO_LVM crashkernel=auto rhgb quiet rd_NO_DM rhgb quiet
Sep 12 00:19:33 homestudio kernel: KERNEL supported cpus:
Sep 12 00:19:33 homestudio kernel:  Intel GenuineIntel
Sep 12 00:19:33 homestudio kernel:  AMD AuthenticAMD
Sep 12 00:19:33 homestudio kernel:  Centaur CentaurHauls
Sep 12 00:19:33 homestudio kernel: BIOS-provided physical RAM map:
Sep 12 00:19:33 homestudio kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep 12 00:19:33 homestudio kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep 12 00:19:33 homestudio kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Sep 12 00:19:33 homestudio kernel: BIOS-e820: 0000000000100000 - 000000007fffd000 (usable)
Sep 12 00:19:33 homestudio kernel: BIOS-e820: 000000007fffd000 - 0000000080000000 (reserved)
Sep 12 00:19:33 homestudio kernel: BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
Sep 12 00:19:33 homestudio kernel: DMI 2.4 present.
Sep 12 00:19:33 homestudio kernel: SMBIOS version 2.4 @ 0xFDA50
Sep 12 00:19:33 homestudio kernel: last_pfn = 0x7fffd max_arch_pfn = 0x400000000
Sep 12 00:19:33 homestudio kernel: PAT not supported by CPU.
Sep 12 00:19:33 homestudio kernel: init_memory_mapping: 0000000000000000-000000007fffd000
Sep 12 00:19:33 homestudio kernel: RAMDISK: 370cd000 - 37fef2e0
Sep 12 00:19:33 homestudio kernel: ACPI: RSDP 00000000000fda20 00014 (v00 BOCHS )
Sep 12 00:19:33 homestudio kernel: ACPI: RSDT 000000007fffd740 00030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
Sep 12 00:19:33 homestudio kernel: ACPI: FACP 000000007ffffe50 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
Sep 12 00:19:33 homestudio kernel: ACPI: DSDT 000000007fffd900 024FD (v01   BXPC   BXDSDT 00000001 INTL 20090123)
Sep 12 00:19:33 homestudio kernel: ACPI: FACS 000000007ffffe00 00040
Sep 12 00:19:33 homestudio kernel: ACPI: SSDT 000000007fffd860 0009E (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
Sep 12 00:19:33 homestudio kernel: ACPI: APIC 000000007fffd770 00078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
Sep 12 00:19:33 homestudio kernel: No NUMA configuration found
Sep 12 00:19:33 homestudio kernel: Faking a node at 0000000000000000-000000007fffd000
Sep 12 00:19:33 homestudio kernel: Bootmem setup node 0 0000000000000000-000000007fffd000
Sep 12 00:19:33 homestudio kernel:  NODE_DATA [000000000000a000 - 000000000003dfff]
Sep 12 00:19:33 homestudio kernel:  bootmap [000000000003e000 -  000000000004dfff] pages 10
Sep 12 00:19:33 homestudio kernel: (7 early reservations) ==> bootmem [0000000000 - 007fffd000]
Sep 12 00:19:33 homestudio kernel:  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep 12 00:19:33 homestudio kernel:  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
Sep 12 00:19:33 homestudio kernel:  #2 [0001000000 - 0002012024]    TEXT DATA BSS ==> [0001000000 - 0002012024]
Sep 12 00:19:33 homestudio kernel:  #3 [00370cd000 - 0037fef2e0]          RAMDISK ==> [00370cd000 - 0037fef2e0]
Sep 12 00:19:33 homestudio kernel:  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep 12 00:19:33 homestudio kernel:  #5 [0002013000 - 0002013081]              BRK ==> [0002013000 - 0002013081]
Sep 12 00:19:33 homestudio kernel:  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
Sep 12 00:19:33 homestudio kernel: found SMP MP-table at [ffff8800000fda70] fda70
Sep 12 00:19:33 homestudio kernel: Reserving 129MB of memory at 48MB for crashkernel (System RAM: 2047MB)
Sep 12 00:19:33 homestudio kernel: kvm-clock: Using msrs 4b564d01 and 4b564d00
Sep 12 00:19:33 homestudio kernel: kvm-clock: cpu 0, msr 0:1c1f601, boot clock
Sep 12 00:19:33 homestudio kernel: Zone PFN ranges:
Sep 12 00:19:33 homestudio kernel:  DMA      0x00000001 -> 0x00001000
Sep 12 00:19:33 homestudio kernel:  DMA32    0x00001000 -> 0x00100000
Sep 12 00:19:33 homestudio kernel:  Normal   0x00100000 -> 0x00100000
Sep 12 00:19:33 homestudio kernel: Movable zone start PFN for each node
Sep 12 00:19:33 homestudio kernel: early_node_map[2] active PFN ranges
Sep 12 00:19:33 homestudio kernel:    0: 0x00000001 -> 0x0000009f
Sep 12 00:19:33 homestudio kernel:    0: 0x00000100 -> 0x0007fffd
Sep 12 00:19:33 homestudio kernel: ACPI: PM-Timer IO Port: 0xb008
Sep 12 00:19:33 homestudio kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 12 00:19:33 homestudio kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Sep 12 00:19:33 homestudio kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Sep 12 00:19:33 homestudio kernel: IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
Sep 12 00:19:33 homestudio kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 12 00:19:33 homestudio kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
Sep 12 00:19:33 homestudio kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 12 00:19:33 homestudio kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
Sep 12 00:19:33 homestudio kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
Sep 12 00:19:33 homestudio kernel: Using ACPI (MADT) for SMP configuration information
Sep 12 00:19:33 homestudio kernel: SMP: Allowing 1 CPUs, 0 hotplug CPUs
Sep 12 00:19:33 homestudio kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep 12 00:19:33 homestudio kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Sep 12 00:19:33 homestudio kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Sep 12 00:19:33 homestudio kernel: Allocating PCI resources starting at 80000000 (gap: 80000000:7ffbc000)
Sep 12 00:19:33 homestudio kernel: Booting paravirtualized kernel on KVM
Sep 12 00:19:33 homestudio kernel: NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
Sep 12 00:19:33 homestudio kernel: PERCPU: Embedded 31 pages/cpu @ffff880002200000 s94424 r8192 d24360 u2097152
Sep 12 00:19:33 homestudio kernel: pcpu-alloc: s94424 r8192 d24360 u2097152 alloc=1*2097152
Sep 12 00:19:33 homestudio kernel: pcpu-alloc: [0] 0 
Sep 12 00:19:33 homestudio kernel: kvm-clock: cpu 0, msr 0:2216601, primary cpu clock
Sep 12 00:19:33 homestudio kernel: kvm-stealtime: cpu 0, msr 220e840
Sep 12 00:19:33 homestudio kernel: Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516918
Sep 12 00:19:33 homestudio kernel: Policy zone: DMA32
Sep 12 00:19:33 homestudio kernel: Kernel command line: ro root=UUID=3e774e9e-1a73-41ec-8572-0303ee2e4cad rd_NO_LUKS  KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_NO_LVM crashkernel=129M@0M rhgb quiet rd_NO_DM rhgb quiet
Sep 12 00:19:33 homestudio kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Sep 12 00:19:33 homestudio kernel: Checking aperture...
Sep 12 00:19:33 homestudio kernel: No AGP bridge found
Sep 12 00:19:33 homestudio kernel: Memory: 1903388k/2097140k available (5152k kernel code, 392k absent, 193360k reserved, 7166k data, 1260k init)
Sep 12 00:19:33 homestudio kernel: Hierarchical RCU implementation.
Sep 12 00:19:33 homestudio kernel: NR_IRQS:33024 nr_irqs:256
Sep 12 00:19:33 homestudio kernel: Console: colour VGA+ 80x25
Sep 12 00:19:33 homestudio kernel: console [tty0] enabled
Sep 12 00:19:33 homestudio kernel: allocated 16777216 bytes of page_cgroup
Sep 12 00:19:33 homestudio kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep 12 00:19:33 homestudio kernel: Detected 3300.022 MHz processor.
Sep 12 00:19:33 homestudio kernel: Calibrating delay loop (skipped) preset value.. 6600.04 BogoMIPS (lpj=3300022)
Sep 12 00:19:33 homestudio kernel: pid_max: default: 32768 minimum: 301
Sep 12 00:19:33 homestudio kernel: Security Framework initialized
Sep 12 00:19:33 homestudio kernel: SELinux:  Initializing.
Sep 12 00:19:33 homestudio kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 12 00:19:33 homestudio kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 12 00:19:33 homestudio kernel: Mount-cache hash table entries: 256
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys ns
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys cpuacct
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys memory
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys devices
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys freezer
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys net_cls
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys blkio
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys perf_event
Sep 12 00:19:33 homestudio kernel: Initializing cgroup subsys net_prio
Sep 12 00:19:33 homestudio kernel: mce: CPU supports 10 MCE banks
Sep 12 00:19:33 homestudio kernel: alternatives: switching to unfair spinlock
Sep 12 00:19:33 homestudio kernel: SMP alternatives: switching to UP code
Sep 12 00:19:33 homestudio kernel: Freeing SMP alternatives: 34k freed
Sep 12 00:19:33 homestudio kernel: ACPI: Core revision 20090903
Sep 12 00:19:33 homestudio kernel: ftrace: converting mcount calls to 0f 1f 44 00 00
Sep 12 00:19:33 homestudio kernel: ftrace: allocating 21016 entries in 83 pages
Sep 12 00:19:33 homestudio kernel: Setting APIC routing to flat
Sep 12 00:19:33 homestudio kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 12 00:19:33 homestudio kernel: CPU0: Intel QEMU Virtual CPU version (cpu64-rhel5) stepping 03
Sep 12 00:19:33 homestudio kernel: Performance Events: Broken PMU hardware detected, using software events only.
Sep 12 00:19:33 homestudio kernel: NMI watchdog disabled (cpu0): hardware events not enabled
Sep 12 00:19:33 homestudio kernel: Brought up 1 CPUs
Sep 12 00:19:33 homestudio kernel: Total of 1 processors activated (6600.04 BogoMIPS).
Sep 12 00:19:33 homestudio kernel: devtmpfs: initialized
Sep 12 00:19:33 homestudio kernel: regulator: core version 0.5
Sep 12 00:19:33 homestudio kernel: NET: Registered protocol family 16
Sep 12 00:19:33 homestudio kernel: ACPI: bus type pci registered
Sep 12 00:19:33 homestudio kernel: PCI: Using configuration type 1 for base access
Sep 12 00:19:33 homestudio kernel: bio: create slab <bio-0> at 0
Sep 12 00:19:33 homestudio kernel: ACPI: Interpreter enabled
Sep 12 00:19:33 homestudio kernel: ACPI: (supports S0 S5)
Sep 12 00:19:33 homestudio kernel: ACPI: Using IOAPIC for interrupt routing
Sep 12 00:19:33 homestudio kernel: ACPI: No dock devices found.
Sep 12 00:19:33 homestudio kernel: HEST: Table not found.
Sep 12 00:19:33 homestudio kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Sep 12 00:19:33 homestudio kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Sep 12 00:19:33 homestudio kernel: pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
Sep 12 00:19:33 homestudio kernel: pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
Sep 12 00:19:33 homestudio kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
Sep 12 00:19:33 homestudio kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
Sep 12 00:19:33 homestudio kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
Sep 12 00:19:33 homestudio kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
Sep 12 00:19:33 homestudio kernel: ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
Sep 12 00:19:33 homestudio kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep 12 00:19:33 homestudio kernel: vgaarb: loaded
Sep 12 00:19:33 homestudio kernel: vgaarb: bridge control possible 0000:00:02.0
Sep 12 00:19:33 homestudio kernel: SCSI subsystem initialized
Sep 12 00:19:33 homestudio kernel: usbcore: registered new interface driver usbfs
Sep 12 00:19:33 homestudio kernel: usbcore: registered new interface driver hub
Sep 12 00:19:33 homestudio kernel: usbcore: registered new device driver usb
Sep 12 00:19:33 homestudio kernel: PCI: Using ACPI for IRQ routing
Sep 12 00:19:33 homestudio kernel: NetLabel: Initializing
Sep 12 00:19:33 homestudio kernel: NetLabel:  domain hash size = 128
Sep 12 00:19:33 homestudio kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Sep 12 00:19:33 homestudio kernel: NetLabel:  unlabeled traffic allowed by default
Sep 12 00:19:33 homestudio kernel: Switching to clocksource kvm-clock
Sep 12 00:19:33 homestudio kernel: pnp: PnP ACPI init
Sep 12 00:19:33 homestudio kernel: ACPI: bus type pnp registered
Sep 12 00:19:33 homestudio kernel: pnp: PnP ACPI: found 5 devices
Sep 12 00:19:33 homestudio kernel: ACPI: ACPI bus type pnp unregistered
Sep 12 00:19:33 homestudio kernel: NET: Registered protocol family 2
Sep 12 00:19:33 homestudio kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Sep 12 00:19:33 homestudio kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Sep 12 00:19:33 homestudio kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Sep 12 00:19:33 homestudio kernel: TCP: Hash tables configured (established 262144 bind 65536)
Sep 12 00:19:33 homestudio kernel: TCP reno registered
Sep 12 00:19:33 homestudio kernel: NET: Registered protocol family 1
Sep 12 00:19:33 homestudio kernel: pci 0000:00:00.0: Limiting direct PCI/PCI transfers
Sep 12 00:19:33 homestudio kernel: pci 0000:00:01.0: PIIX3: Enabling Passive Release
Sep 12 00:19:33 homestudio kernel: pci 0000:00:01.0: Activating ISA DMA hang workarounds
Sep 12 00:19:33 homestudio kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Sep 12 00:19:33 homestudio kernel: pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
Sep 12 00:19:33 homestudio kernel: pci 0000:00:01.2: PCI INT D disabled
Sep 12 00:19:33 homestudio kernel: Trying to unpack rootfs image as initramfs...
Sep 12 00:19:33 homestudio kernel: Freeing initrd memory: 15496k freed
Sep 12 00:19:33 homestudio kernel: audit: initializing netlink socket (disabled)
Sep 12 00:19:33 homestudio kernel: type=2000 audit(1378930768.389:1): initialized
Sep 12 00:19:33 homestudio kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Sep 12 00:19:33 homestudio kernel: VFS: Disk quotas dquot_6.5.2
Sep 12 00:19:33 homestudio kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 12 00:19:33 homestudio kernel: msgmni has been set to 3747
Sep 12 00:19:33 homestudio kernel: alg: No test for stdrng (krng)
Sep 12 00:19:33 homestudio kernel: ksign: Installing public key data
Sep 12 00:19:33 homestudio kernel: Loading keyring
Sep 12 00:19:33 homestudio kernel: - Added public key E82C5CB35B8516BA
Sep 12 00:19:33 homestudio kernel: - User ID: CentOS (Kernel Module GPG key)
Sep 12 00:19:33 homestudio kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Sep 12 00:19:33 homestudio kernel: io scheduler noop registered
Sep 12 00:19:33 homestudio kernel: io scheduler anticipatory registered
Sep 12 00:19:33 homestudio kernel: io scheduler deadline registered
Sep 12 00:19:33 homestudio kernel: io scheduler cfq registered (default)
Sep 12 00:19:33 homestudio kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 12 00:19:33 homestudio kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep 12 00:19:33 homestudio kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [1] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [2] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [3] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [4] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [5] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [6] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [7] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [8] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [9] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [10] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [11] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [12] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [13] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [14] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [15] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [16] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [17] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [18] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [19] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [20] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [21] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [22] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [23] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [24] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [25] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [26] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [27] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [28] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [29] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [30] registered
Sep 12 00:19:33 homestudio kernel: acpiphp: Slot [31] registered
Sep 12 00:19:33 homestudio kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Sep 12 00:19:33 homestudio kernel: ACPI: Power Button [PWRF]
Sep 12 00:19:33 homestudio kernel: ERST: Table is not found!
Sep 12 00:19:33 homestudio kernel: GHES: HEST is not enabled!
Sep 12 00:19:33 homestudio kernel: Non-volatile memory driver v1.3
Sep 12 00:19:33 homestudio kernel: Linux agpgart interface v0.103
Sep 12 00:19:33 homestudio kernel: crash memory driver: version 1.1
Sep 12 00:19:33 homestudio kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep 12 00:19:33 homestudio kernel: brd: module loaded
Sep 12 00:19:33 homestudio kernel: loop: module loaded
Sep 12 00:19:33 homestudio kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input1
Sep 12 00:19:33 homestudio kernel: Fixed MDIO Bus: probed
Sep 12 00:19:33 homestudio kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep 12 00:19:33 homestudio kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep 12 00:19:33 homestudio kernel: uhci_hcd: USB Universal Host Controller Interface driver
Sep 12 00:19:33 homestudio kernel: uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
Sep 12 00:19:33 homestudio kernel: uhci_hcd 0000:00:01.2: UHCI Host Controller
Sep 12 00:19:33 homestudio kernel: uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
Sep 12 00:19:33 homestudio kernel: uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
Sep 12 00:19:33 homestudio kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Sep 12 00:19:33 homestudio kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 12 00:19:33 homestudio kernel: usb usb1: Product: UHCI Host Controller
Sep 12 00:19:33 homestudio kernel: usb usb1: Manufacturer: Linux 2.6.32-279.5.2.el6.x86_64 uhci_hcd
Sep 12 00:19:33 homestudio kernel: usb usb1: SerialNumber: 0000:00:01.2
Sep 12 00:19:33 homestudio kernel: usb usb1: configuration #1 chosen from 1 choice
Sep 12 00:19:33 homestudio kernel: hub 1-0:1.0: USB hub found
Sep 12 00:19:33 homestudio kernel: hub 1-0:1.0: 2 ports detected
Sep 12 00:19:33 homestudio kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
Sep 12 00:19:33 homestudio kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 12 00:19:33 homestudio kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 12 00:19:33 homestudio kernel: mice: PS/2 mouse device common for all mice
Sep 12 00:19:33 homestudio kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Sep 12 00:19:33 homestudio kernel: rtc_cmos 00:01: RTC can wake from S4
Sep 12 00:19:33 homestudio kernel: rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
Sep 12 00:19:33 homestudio kernel: rtc0: alarms up to one day, 114 bytes nvram
Sep 12 00:19:33 homestudio kernel: cpuidle: using governor ladder
Sep 12 00:19:33 homestudio kernel: cpuidle: using governor menu
Sep 12 00:19:33 homestudio kernel: EFI Variables Facility v0.08 2004-May-17
Sep 12 00:19:33 homestudio kernel: usbcore: registered new interface driver hiddev
Sep 12 00:19:33 homestudio kernel: usbcore: registered new interface driver usbhid
Sep 12 00:19:33 homestudio kernel: usbhid: v2.6:USB HID core driver
Sep 12 00:19:33 homestudio kernel: TCP cubic registered
Sep 12 00:19:33 homestudio kernel: Initializing XFRM netlink socket
Sep 12 00:19:33 homestudio kernel: NET: Registered protocol family 17
Sep 12 00:19:33 homestudio kernel: registered taskstats version 1
Sep 12 00:19:33 homestudio kernel: rtc_cmos 00:01: setting system clock to 2013-09-12 00:19:28 UTC (1378945168)
Sep 12 00:19:33 homestudio kernel: Initalizing network drop monitor service
Sep 12 00:19:33 homestudio kernel: Freeing unused kernel memory: 1260k freed
Sep 12 00:19:33 homestudio kernel: Write protecting the kernel read-only data: 10240k
Sep 12 00:19:33 homestudio kernel: Freeing unused kernel memory: 972k freed
Sep 12 00:19:33 homestudio kernel: Freeing unused kernel memory: 1732k freed
Sep 12 00:19:33 homestudio kernel: dracut: dracut-004-284.el6_3
Sep 12 00:19:33 homestudio kernel: dracut: rd_NO_LUKS: removing cryptoluks activation
Sep 12 00:19:33 homestudio kernel: dracut: rd_NO_LVM: removing LVM activation
Sep 12 00:19:33 homestudio kernel: device-mapper: uevent: version 1.0.3
Sep 12 00:19:33 homestudio kernel: device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
Sep 12 00:19:33 homestudio kernel: udev: starting version 147
Sep 12 00:19:33 homestudio kernel: dracut: Starting plymouth daemon
Sep 12 00:19:33 homestudio kernel: dracut: rd_NO_DM: removing DM RAID activation
Sep 12 00:19:33 homestudio kernel: dracut: rd_NO_MD: removing MD RAID activation
Sep 12 00:19:33 homestudio kernel: scsi0 : ata_piix
Sep 12 00:19:33 homestudio kernel: scsi1 : ata_piix
Sep 12 00:19:33 homestudio kernel: ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
Sep 12 00:19:33 homestudio kernel: ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
Sep 12 00:19:33 homestudio kernel: input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
Sep 12 00:19:33 homestudio kernel: ata1.00: ATA-7: QEMU HARDDISK, 0.12.1, max UDMA/100
Sep 12 00:19:33 homestudio kernel: ata1.00: 488366080 sectors, multi 16: LBA48 
Sep 12 00:19:33 homestudio kernel: ata1.00: configured for MWDMA2
Sep 12 00:19:33 homestudio kernel: scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
Sep 12 00:19:33 homestudio kernel: virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
Sep 12 00:19:33 homestudio kernel: sd 0:0:0:0: [sda] 488366080 512-byte logical blocks: (250 GB/232 GiB)
Sep 12 00:19:33 homestudio kernel: sd 0:0:0:0: [sda] Write Protect is off
Sep 12 00:19:33 homestudio kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Sep 12 00:19:33 homestudio kernel: sda: sda1 sda2
Sep 12 00:19:33 homestudio kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Sep 12 00:19:33 homestudio kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
Sep 12 00:19:33 homestudio kernel: dracut: Mounted root filesystem /dev/sda1
Sep 12 00:19:33 homestudio kernel: Refined TSC clocksource calibration: 3299.922 MHz.
Sep 12 00:19:33 homestudio kernel: SELinux:  Disabled at runtime.
Sep 12 00:19:33 homestudio kernel: type=1404 audit(1378945169.475:2): selinux=0 auid=4294967295 ses=4294967295
Sep 12 00:19:33 homestudio kernel: dracut: 
Sep 12 00:19:33 homestudio kernel: dracut: Switching root
Sep 12 00:19:33 homestudio kernel: readahead-collector: starting
Sep 12 00:19:33 homestudio kernel: udev: starting version 147
Sep 12 00:19:33 homestudio kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep 12 00:19:33 homestudio kernel: piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
Sep 12 00:19:33 homestudio kernel: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Sep 12 00:19:33 homestudio kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Sep 12 00:19:33 homestudio kernel: 8139cp 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
Sep 12 00:19:33 homestudio kernel: eth0: RTL-8139C+ at 0xffffc90000a54000, 52:54:00:bf:fc:93, IRQ 10
Sep 12 00:19:33 homestudio kernel: 8139too Fast Ethernet driver 0.9.28
Sep 12 00:19:33 homestudio kernel: microcode: CPU0 sig=0x663, pf=0x1, revision=0x1
Sep 12 00:19:33 homestudio kernel: platform microcode: firmware: requesting intel-ucode/06-06-03
Sep 12 00:19:33 homestudio kernel: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Sep 12 00:19:33 homestudio kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
Sep 12 00:19:33 homestudio kernel: readahead-disable-service: delaying service auditd
Sep 12 00:19:33 homestudio kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Sep 12 00:19:33 homestudio kernel: NET: Registered protocol family 10
Sep 12 00:19:33 homestudio kernel: lo: Disabled Privacy Extensions
Sep 12 00:19:33 homestudio kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
Sep 12 00:19:34 homestudio named[1155]: starting BIND 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6_3.2 -u named -4
Sep 12 00:19:34 homestudio named[1155]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--with-libtool' '--localstatedir=/var' '--enable-threads' '--enable-ipv6' '--with-pic' '--disable-static' '--disable-openssl-version-check' '--with-dlz-ldap=yes' '--with-dlz-postgres=yes' '--with-dlz-mysql=yes' '--with-dlz-filesystem=yes' '--with-gssapi=yes' '--disable-isc-spnego' '--with-docbook-xsl=/usr/share/sgml/docbook/xsl-stylesheets' '--enable-fixed-rrset' 'build_alias=x86_64-redhat-linux-gnu' 'host_alias=x86_64-redhat-linux-gnu' 'target_alias=x86_64-redhat-linux-gnu' 'CFLAGS= -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' 'CPPFLAGS= -DDIG_SIGCHASE'
Sep 12 00:19:34 homestudio named[1155]: ----------------------------------------------------
Sep 12 00:19:34 homestudio named[1155]: BIND 9 is maintained by Internet Systems Consortium,
Sep 12 00:19:34 homestudio named[1155]: Inc. (ISC), a non-profit 501(c)(3) public-benefit 
Sep 12 00:19:34 homestudio named[1155]: corporation.  Support and training for BIND 9 are 
Sep 12 00:19:34 homestudio named[1155]: available at https://www.isc.org/support
Sep 12 00:19:34 homestudio named[1155]: ----------------------------------------------------
Sep 12 00:19:34 homestudio named[1155]: adjusted limit on open files from 4096 to 1048576
Sep 12 00:19:34 homestudio named[1155]: found 1 CPU, using 1 worker thread
Sep 12 00:19:34 homestudio named[1155]: using up to 4096 sockets
Sep 12 00:19:34 homestudio named[1155]: loading configuration from '/etc/named.conf'
Sep 12 00:19:34 homestudio named[1155]: reading built-in trusted keys from file '/etc/named.iscdlv.key'
Sep 12 00:19:34 homestudio named[1155]: using default UDP/IPv4 port range: [1024, 65535]
Sep 12 00:19:34 homestudio named[1155]: using default UDP/IPv6 port range: [1024, 65535]
Sep 12 00:19:34 homestudio named[1155]: no IPv6 interfaces found
Sep 12 00:19:34 homestudio named[1155]: listening on IPv4 interface lo, 127.0.0.1#53
Sep 12 00:19:34 homestudio named[1155]: listening on IPv4 interface eth0, 193.0.61.240#53
Sep 12 00:19:34 homestudio named[1155]: listening on IPv4 interface eth0:0, 193.0.61.241#53
Sep 12 00:19:34 homestudio named[1155]: generating session key for dynamic DNS
Sep 12 00:19:34 homestudio named[1155]: sizing zone task pool based on 82 zones
Sep 12 00:19:34 homestudio named[1155]: using built-in DLV key for view _default
Sep 12 00:19:34 homestudio named[1155]: set up managed keys zone for view _default, file '/var/named/dynamic/managed-keys.bind'
Sep 12 00:19:34 homestudio named[1155]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 127.IN-ADDR.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 254.169.IN-ADDR.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 2.0.192.IN-ADDR.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 100.51.198.IN-ADDR.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 113.0.203.IN-ADDR.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: D.F.IP6.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 8.E.F.IP6.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 9.E.F.IP6.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: A.E.F.IP6.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: B.E.F.IP6.ARPA
Sep 12 00:19:34 homestudio named[1155]: automatic empty zone: 8.B.D.0.1.0.0.2.IP6.ARPA
Sep 12 00:19:34 homestudio named[1155]: /etc/rndc.key:7: unknown option 'options'
Sep 12 00:19:34 homestudio named[1155]: couldn't add command channel 127.0.0.1#953: failure
Sep 12 00:19:34 homestudio named[1155]: zone 0.in-addr.arpa/IN: loaded serial 0
Sep 12 00:19:34 homestudio named[1155]: zone 1.0.0.127.in-addr.arpa/IN: loaded serial 0
Sep 12 00:19:34 homestudio named[1155]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: loaded serial 0
Sep 12 00:19:34 homestudio named[1155]: zone stimulus-life.biz/IN: loaded serial 2013082912
(cписок зон)
Sep 12 00:19:34 homestudio named[1155]: zone ilyagolovan.ru/IN: sending notifies (serial 2013070205)
Sep 12 00:19:34 homestudio kdump: kexec: loaded kdump kernel
Sep 12 00:19:34 homestudio kdump: started up
Sep 12 00:19:34 homestudio acpid: starting up
Sep 12 00:19:34 homestudio acpid: 1 rule loaded
Sep 12 00:19:34 homestudio acpid: waiting for events: event logging is off
Sep 12 00:19:35 homestudio acpid: client connected from 1319[68:68]
Sep 12 00:19:35 homestudio acpid: 1 client rule loaded
Sep 12 00:19:35 homestudio ntpd[1344]: ntpd 4.2.4p8@1.1612-o Tue Nov 29 00:09:12 UTC 2011 (1)
Sep 12 00:19:35 homestudio ntpd[1345]: precision = 0.168 usec
Sep 12 00:19:35 homestudio ntpd[1345]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Sep 12 00:19:35 homestudio ntpd[1345]: Listening on interface #1 wildcard, ::#123 Disabled
Sep 12 00:19:35 homestudio ntpd[1345]: Listening on interface #2 lo, ::1#123 Enabled
Sep 12 00:19:35 homestudio ntpd[1345]: Listening on interface #3 eth0, fe80::5054:ff:febf:fc93#123 Enabled
Sep 12 00:19:35 homestudio ntpd[1345]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Sep 12 00:19:35 homestudio ntpd[1345]: Listening on interface #5 eth0, 193.0.61.240#123 Enabled
Sep 12 00:19:35 homestudio ntpd[1345]: Listening on interface #6 eth0:0, 193.0.61.241#123 Enabled
Sep 12 00:19:35 homestudio ntpd[1345]: Listening on routing socket on fd #23 for interface updates
Sep 12 00:19:35 homestudio ntpd[1345]: kernel time sync status 2040
Sep 12 00:19:35 homestudio ntpd[1345]: frequency initialized -0.783 PPM from /var/lib/ntp/drift
Sep 12 00:19:37 homestudio proftpd[1602]: 193.0.61.240 - ProFTPD 1.3.4a (maint) (built Fri Jan 20 2012 17:30:05 EST) standalone mode STARTUP
Sep 12 00:19:37 homestudio abrtd: Init complete, entering main loop
Sep 12 00:19:49 homestudio kernel: type=1305 audit(1378930789.309:18395): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
Sep 12 00:19:49 homestudio kernel: type=1305 audit(1378930789.309:18396): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
Sep 12 00:19:49 homestudio kernel: readahead-collector: starting delayed service auditd
Sep 12 00:19:49 homestudio auditd[1737]: Started dispatcher: /sbin/audispd pid: 1739
Sep 12 00:19:49 homestudio audispd: No plugins found, exiting
Sep 12 00:19:49 homestudio auditd[1737]: Init complete, auditd 2.2 listening for events (startup state enable)
Sep 12 00:19:49 homestudio kernel: readahead-collector: sorting
Sep 12 00:19:49 homestudio kernel: readahead-collector: finished