fiver@home:~> cat /var/log/Xorg.0.log
[    13.294]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[    13.294] X Protocol Version 11, Revision 0
[    13.294] Build Operating System: openSUSE SUSE LINUX
[    13.294] Current Operating System: Linux home 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) i686
[    13.294] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.16-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1 nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts
[    13.294] Build Date: 22 October 2013  08:17:03AM
[    13.294] 
[    13.294] Current version of pixman: 0.28.2
[    13.294]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    13.294] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.294] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  9 01:23:39 2013
[    13.294] (==) Using config file: "/etc/X11/xorg.conf"
[    13.294] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.294] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    13.303] (==) ServerLayout "Layout0"
[    13.303] (**) |-->Screen "Screen0" (0)
[    13.303] (**) |   |-->Monitor "Monitor0"
[    13.303] (**) |   |-->Device "Device0"
[    13.303] (**) |-->Input Device "Keyboard0"
[    13.303] (**) |-->Input Device "Mouse0"
[    13.303] (**) Option "Xinerama" "0"
[    13.303] (==) Automatically adding devices
[    13.303] (==) Automatically enabling devices
[    13.303] (==) Automatically adding GPU devices
[    13.303] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    13.303]    Entry deleted from font path.
[    13.303] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[    13.303] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    13.303] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    13.303] (WW) Disabling Keyboard0
[    13.303] (WW) Disabling Mouse0
[    13.303] (II) Loader magic: 0x8261620
[    13.303] (II) Module ABI versions:
[    13.303]    X.Org ANSI C Emulation: 0.4
[    13.303]    X.Org Video Driver: 13.1
[    13.303]    X.Org XInput driver : 18.0
[    13.303]    X.Org Server Extension : 7.0
[    13.304] (--) PCI:*(0:1:0:0) 10de:0622:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[    13.304] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    13.304] Initializing built-in extension Generic Event Extension
[    13.304] Initializing built-in extension SHAPE
[    13.304] Initializing built-in extension MIT-SHM
[    13.304] Initializing built-in extension XInputExtension
[    13.304] Initializing built-in extension XTEST
[    13.304] Initializing built-in extension BIG-REQUESTS
[    13.304] Initializing built-in extension SYNC
[    13.304] Initializing built-in extension XKEYBOARD
[    13.304] Initializing built-in extension XC-MISC
[    13.304] Initializing built-in extension SECURITY
[    13.304] Initializing built-in extension XINERAMA
[    13.304] Initializing built-in extension XFIXES
[    13.304] Initializing built-in extension RENDER
[    13.304] Initializing built-in extension RANDR
[    13.304] Initializing built-in extension COMPOSITE
[    13.304] Initializing built-in extension DAMAGE
[    13.304] Initializing built-in extension MIT-SCREEN-SAVER
[    13.304] Initializing built-in extension DOUBLE-BUFFER
[    13.304] Initializing built-in extension RECORD
[    13.304] Initializing built-in extension DPMS
[    13.304] Initializing built-in extension X-Resource
[    13.304] Initializing built-in extension XVideo
[    13.304] Initializing built-in extension XVideo-MotionCompensation
[    13.304] Initializing built-in extension XFree86-VidModeExtension
[    13.304] Initializing built-in extension XFree86-DGA
[    13.304] Initializing built-in extension XFree86-DRI
[    13.304] Initializing built-in extension DRI2
[    13.304] (II) "glx" will be loaded by default.
[    13.304] (II) LoadModule: "dri2"
[    13.305] (II) Module "dri2" already built-in
[    13.305] (II) LoadModule: "glamoregl"
[    13.395] (WW) Warning, couldn't open module glamoregl
[    13.395] (II) UnloadModule: "glamoregl"
[    13.395] (II) Unloading glamoregl
[    13.395] (EE) Failed to load module "glamoregl" (module does not exist, 0)
[    13.395] (II) LoadModule: "glx"
[    13.395] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.606] (II) Module glx: vendor="NVIDIA Corporation"
[    14.606]    compiled for 4.0.2, module version = 1.0.0
[    14.606]    Module class: X.Org Server Extension
[    14.606] (II) NVIDIA GLX Module  331.20  Wed Oct 30 17:53:40 PDT 2013
[    14.606] Loading extension GLX
[    14.606] (II) LoadModule: "nvidia"
[    14.607] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    14.607] (II) Module nvidia: vendor="NVIDIA Corporation"
[    14.607]    compiled for 4.0.2, module version = 1.0.0
[    14.607]    Module class: X.Org Video Driver
[    14.607] (II) NVIDIA dlloader X Driver  331.20  Wed Oct 30 17:32:26 PDT 2013
[    14.607] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    14.607] (++) using VT number 7

[    14.607] (II) Loading sub module "fb"
[    14.607] (II) LoadModule: "fb"
[    14.608] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.608] (II) Module fb: vendor="X.Org Foundation"
[    14.608]    compiled for 1.13.2, module version = 1.0.0
[    14.608]    ABI class: X.Org ANSI C Emulation, version 0.4
[    14.608] (WW) Unresolved symbol: fbGetGCPrivateKey
[    14.608] (II) Loading sub module "wfb"
[    14.608] (II) LoadModule: "wfb"
[    14.608] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    14.609] (II) Module wfb: vendor="X.Org Foundation"
[    14.609]    compiled for 1.13.2, module version = 1.0.0
[    14.609]    ABI class: X.Org ANSI C Emulation, version 0.4
[    14.609] (II) Loading sub module "ramdac"
[    14.609] (II) LoadModule: "ramdac"
[    14.609] (II) Module "ramdac" already built-in
[    14.609] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    14.609] (==) NVIDIA(0): RGB weight 888
[    14.609] (==) NVIDIA(0): Default visual is TrueColor
[    14.609] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    14.609] (**) NVIDIA(0): Option "Stereo" "0"
[    14.609] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[    14.609] (**) NVIDIA(0): Option "SLI" "Off"
[    14.609] (**) NVIDIA(0): Option "MultiGPU" "Off"
[    14.609] (**) NVIDIA(0): Option "BaseMosaic" "off"
[    14.609] (**) NVIDIA(0): Stereo disabled by request
[    14.609] (**) NVIDIA(0): NVIDIA SLI disabled.
[    14.609] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[    14.609] (**) NVIDIA(0): Enabling 2D acceleration
[    15.980] (WW) NVIDIA(0): The EDID read for display device CRT-1 is invalid: the
[    15.980] (WW) NVIDIA(0):     checksum for EDID version 1 is invalid.
[    15.980] (--) NVIDIA(0):
[    15.980] (--) NVIDIA(0): Raw EDID bytes:
[    15.980] (--) NVIDIA(0):
[    15.980] (--) NVIDIA(0):   00 ff ff ff ff ff ff 00  04 72 2f 00 66 3c 10 82
[    15.980] (--) NVIDIA(0):   15 12 01 03 6c 22 1b 78  f2 3d 85 a6 56 4a 9a 24
[    15.980] (--) NVIDIA(0):   12 50 e5 bf ef 00 61 46  71 40 71 4f 81 00 81 40
[    15.980] (--) NVIDIA(0):   81 4a 81 4f 81 80 30 2a  00 e4 51 00 2a 40 30 70
[    15.980] (--) NVIDIA(0):   13 00 52 0e 11 00 00 1e  00 e4 03 fd 00 31 4b 1e
[    15.980] (--) NVIDIA(0):   50 0e e4 0a 20 20 20 20  20 20 00 00 00 fc 00 41
[    15.980] (--) NVIDIA(0):   63 65 72 20 54 31 37 33  0a 20 20 20 00 00 00 ff
[    15.980] (--) NVIDIA(0):   00 4c 03 41 30 32 30 3e  31 34 31 30 31 0a 00 ef
[    15.980] (--) NVIDIA(0):
[    15.980] (--) NVIDIA(0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    15.980] (--) NVIDIA(0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    15.980] (--) NVIDIA(0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    15.980] (--) NVIDIA(0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    15.980] (--) NVIDIA(0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    15.980] (--) NVIDIA(0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    15.980] (--) NVIDIA(0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    15.980] (--) NVIDIA(0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    15.980] (--) NVIDIA(0):
[    16.047] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[    16.047] (--) NVIDIA(0): Memory: 524288 kBytes
[    16.047] (--) NVIDIA(0): VideoBIOS: 62.94.82.00.00
[    16.047] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    16.050] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
[    16.050] (--) NVIDIA(0):     CRT-0
[    16.050] (--) NVIDIA(0):     CRT-1 (boot, connected)
[    16.050] (--) NVIDIA(0):     DFP-0
[    16.050] (--) NVIDIA(0):     DFP-1
[    16.050] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    16.050] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    16.050] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    16.050] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    16.050] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    16.050] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    16.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    16.050] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[    16.050] (**) NVIDIA(0):     all display devices.)
[    16.052] (==) NVIDIA(0):
[    16.052] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    16.052] (==) NVIDIA(0):     will be used as the requested mode.
[    16.052] (==) NVIDIA(0):
[    16.052] (II) NVIDIA(0): Validated MetaModes:
[    16.052] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
[    16.052] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    16.074] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[    16.074] (WW) NVIDIA(0):     from CRT-1's EDID.
[    16.074] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    16.074] (--) Depth 24 pixmap format is 32 bpp
[    16.074] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    16.077] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    16.077] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    16.077] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    16.077] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    16.077] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    16.077] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    16.077] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    16.077] (II) NVIDIA(0):     Config Options in the README.
[    16.079] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[    16.110] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[    16.110] Loading extension NV-GLX
[    16.119] (==) NVIDIA(0): Disabling shared memory pixmaps
[    16.119] (==) NVIDIA(0): Backing store disabled
[    16.119] (==) NVIDIA(0): Silken mouse enabled
[    16.119] (**) NVIDIA(0): DPMS enabled
[    16.119] Loading extension NV-CONTROL
[    16.119] Loading extension XINERAMA
[    16.119] (II) Loading sub module "dri2"
[    16.119] (II) LoadModule: "dri2"
[    16.119] (II) Module "dri2" already built-in
[    16.119] (II) NVIDIA(0): [DRI2] Setup complete
[    16.119] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    16.119] (--) RandR disabled
[    16.127] (II) Initializing extension GLX
[    16.206] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    16.206] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.206] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.206] (**) Power Button: Applying InputClass "LocalKeyboard"
[    16.206] (II) LoadModule: "evdev"
[    16.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.207] (II) Module evdev: vendor="X.Org Foundation"
[    16.207]    compiled for 1.13.1, module version = 2.7.3
[    16.207]    Module class: X.Org XInput Driver
[    16.207]    ABI class: X.Org XInput driver, version 18.0
[    16.207] (II) Using input driver 'evdev' for 'Power Button'
[    16.207] (**) Power Button: always reports core events
[    16.208] (**) evdev: Power Button: Device: "/dev/input/event3"
[    16.208] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.208] (--) evdev: Power Button: Found keys
[    16.208] (II) evdev: Power Button: Configuring as keyboard
[    16.208] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    16.208] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    16.208] (**) Option "xkb_rules" "evdev"
[    16.208] (**) Option "xkb_model" "evdev"
[    16.208] (**) Option "xkb_layout" "us,ru"
[    16.208] (**) Option "xkb_variant" ",winkeys"
[    16.208] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    16.242] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    16.242] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.242] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.242] (**) Power Button: Applying InputClass "LocalKeyboard"
[    16.242] (II) Using input driver 'evdev' for 'Power Button'
[    16.242] (**) Power Button: always reports core events
[    16.242] (**) evdev: Power Button: Device: "/dev/input/event2"
[    16.242] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.242] (--) evdev: Power Button: Found keys
[    16.242] (II) evdev: Power Button: Configuring as keyboard
[    16.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    16.242] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    16.242] (**) Option "xkb_rules" "evdev"
[    16.242] (**) Option "xkb_model" "evdev"
[    16.242] (**) Option "xkb_layout" "us,ru"
[    16.242] (**) Option "xkb_variant" ",winkeys"
[    16.242] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    16.242] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10)
[    16.242] (II) No input driver specified, ignoring this device.
[    16.242] (II) This device may have been added with another device file.
[    16.243] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11)
[    16.243] (II) No input driver specified, ignoring this device.
[    16.243] (II) This device may have been added with another device file.
[    16.243] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12)
[    16.243] (II) No input driver specified, ignoring this device.
[    16.243] (II) This device may have been added with another device file.
[    16.243] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[    16.243] (II) No input driver specified, ignoring this device.
[    16.243] (II) This device may have been added with another device file.
[    16.243] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[    16.243] (II) No input driver specified, ignoring this device.
[    16.243] (II) This device may have been added with another device file.
[    16.243] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[    16.243] (II) No input driver specified, ignoring this device.
[    16.243] (II) This device may have been added with another device file.
[    16.244] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event8)
[    16.244] (II) No input driver specified, ignoring this device.
[    16.244] (II) This device may have been added with another device file.
[    16.244] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event9)
[    16.244] (II) No input driver specified, ignoring this device.
[    16.244] (II) This device may have been added with another device file.
[    16.244] (II) config/udev: Adding input device gspca_pac7302 (/dev/input/event13)
[    16.244] (**) gspca_pac7302: Applying InputClass "evdev keyboard catchall"
[    16.244] (**) gspca_pac7302: Applying InputClass "evdev keyboard catchall"
[    16.244] (**) gspca_pac7302: Applying InputClass "LocalKeyboard"
[    16.244] (II) Using input driver 'evdev' for 'gspca_pac7302'
[    16.244] (**) gspca_pac7302: always reports core events
[    16.244] (**) evdev: gspca_pac7302: Device: "/dev/input/event13"
[    16.244] (--) evdev: gspca_pac7302: Vendor 0x93a Product 0x2622
[    16.244] (--) evdev: gspca_pac7302: Found keys
[    16.244] (II) evdev: gspca_pac7302: Configuring as keyboard
[    16.244] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/input/input13/event13"
[    16.244] (II) XINPUT: Adding extended input device "gspca_pac7302" (type: KEYBOARD, id
[    16.244] (**) Option "xkb_rules" "evdev"
[    16.244] (**) Option "xkb_model" "evdev"
[    16.244] (**) Option "xkb_layout" "us,ru"
[    16.244] (**) Option "xkb_variant" ",winkeys"
[    16.244] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    16.245] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    16.245] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.245] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.245] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[    16.245] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    16.245] (**) AT Translated Set 2 keyboard: always reports core events
[    16.245] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    16.245] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    16.245] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    16.245] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    16.245] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    16.245] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    16.245] (**) Option "xkb_rules" "evdev"
[    16.245] (**) Option "xkb_model" "evdev"
[    16.245] (**) Option "xkb_layout" "us,ru"
[    16.245] (**) Option "xkb_variant" ",winkeys"
[    16.245] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    16.245] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event1)
[    16.246] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[    16.246] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[    16.246] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "ImPS/2 Generic Wheel Mouse"
[    16.246] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[    16.246] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[    16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event1"
[    16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[    16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[    16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[    16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[    16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[    16.246] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[    16.246] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[    16.246] (**) Option "Emulate3Buttons" "on"
[    16.246] (**) Option "EmulateWheel" "on"
[    16.246] (**) Option "EmulateWheelButton" "2"
[    16.246] (**) Option "EmulateWheelTimeout" "200"
[    16.246] (**) Option "YAxisMapping" "4 5"
[    16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[    16.246] (**) Option "XAxisMapping" "6 7"
[    16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: XAxisMapping: buttons 6 and 7
[    16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.246] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[    16.246] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[    16.246] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[    16.246] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[    16.246] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[    16.246] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[    16.246] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[    16.246] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[    16.246] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "ImPS/2 Generic Wheel Mouse"
[    16.246] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[    16.246] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[    16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/mouse0"
[    16.246] (EE) ImPS/2 Generic Wheel Mouse: Couldn't open mtdev device
[    16.257] (EE) evdev: ImPS/2 Generic Wheel Mouse: ioctl EVIOCGID failed: Bad file descriptor
[    16.257] (EE) PreInit returned 8 for "ImPS/2 Generic Wheel Mouse"
[    16.257] (II) UnloadModule: "evdev"
[    16.257] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    16.257] (II) No input driver specified, ignoring this device.
[    16.257] (II) This device may have been added with another device file.
[    28.869] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-1 is invalid: the
[    28.869] (WW) NVIDIA(GPU-0):     checksum for EDID version 1 is invalid.
[    28.869] (--) NVIDIA(GPU-0):
[    28.869] (--) NVIDIA(GPU-0): Raw EDID bytes:
[    28.869] (--) NVIDIA(GPU-0):
[    28.869] (--) NVIDIA(GPU-0):   00 ff ff ff ff ff ff 00  04 72 2f 00 66 3c 10 82
[    28.869] (--) NVIDIA(GPU-0):   15 12 01 03 6c 22 1b 78  f2 3d 85 a6 56 4a 9a 24
[    28.869] (--) NVIDIA(GPU-0):   12 50 e5 bf ef 00 61 46  71 40 71 4f 81 00 81 40
[    28.869] (--) NVIDIA(GPU-0):   81 4a 81 4f 81 80 30 2a  00 e4 51 00 2a 40 30 70
[    28.869] (--) NVIDIA(GPU-0):   13 00 52 0e 11 00 00 1e  00 e4 03 fd 00 31 4b 1e
[    28.869] (--) NVIDIA(GPU-0):   50 0e e4 0a 20 20 20 20  20 20 00 00 00 fc 00 41
[    28.869] (--) NVIDIA(GPU-0):   63 65 72 20 54 31 37 33  0a 20 20 20 00 00 00 ff
[    28.869] (--) NVIDIA(GPU-0):   00 4c 03 41 30 32 30 3e  31 34 31 30 31 0a 00 ef
[    28.869] (--) NVIDIA(GPU-0):
[    28.869] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    28.869] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    28.869] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    28.869] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    28.869] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    28.869] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    28.869] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    28.869] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    28.869] (--) NVIDIA(GPU-0):
[    28.869] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    28.869] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[    28.869] (**) NVIDIA(0):     all display devices.)
[    31.971] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-1 is invalid: the
[    31.971] (WW) NVIDIA(GPU-0):     checksum for EDID version 1 is invalid.
[    31.971] (--) NVIDIA(GPU-0):
[    31.971] (--) NVIDIA(GPU-0): Raw EDID bytes:
[    31.971] (--) NVIDIA(GPU-0):
[    31.971] (--) NVIDIA(GPU-0):   00 ff ff ff ff ff ff 00  04 72 2f 00 66 3c 10 82
[    31.971] (--) NVIDIA(GPU-0):   15 12 01 03 6c 22 1b 78  f2 3d 85 a6 56 4a 9a 24
[    31.971] (--) NVIDIA(GPU-0):   12 50 e5 bf ef 00 61 46  71 40 71 4f 81 00 81 40
[    31.971] (--) NVIDIA(GPU-0):   81 4a 81 4f 81 80 30 2a  00 e4 51 00 2a 40 30 70
[    31.971] (--) NVIDIA(GPU-0):   13 00 52 0e 11 00 00 1e  00 e4 03 fd 00 31 4b 1e
[    31.971] (--) NVIDIA(GPU-0):   50 0e e4 0a 20 20 20 20  20 20 00 00 00 fc 00 41
[    31.971] (--) NVIDIA(GPU-0):   63 65 72 20 54 31 37 33  0a 20 20 20 00 00 00 ff
[    31.971] (--) NVIDIA(GPU-0):   00 4c 03 41 30 32 30 3e  31 34 31 30 31 0a 00 ef
[    31.971] (--) NVIDIA(GPU-0):
[    31.971] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    31.971] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    31.971] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    31.971] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    31.971] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    31.971] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    31.971] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    31.971] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    31.971] (--) NVIDIA(GPU-0):
[    31.971] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    31.971] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[    31.971] (**) NVIDIA(0):     all display devices.)
[    42.477] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-1 is invalid: the
[    42.477] (WW) NVIDIA(GPU-0):     checksum for EDID version 1 is invalid.
[    42.477] (--) NVIDIA(GPU-0):
[    42.477] (--) NVIDIA(GPU-0): Raw EDID bytes:
[    42.477] (--) NVIDIA(GPU-0):
[    42.477] (--) NVIDIA(GPU-0):   00 ff ff ff ff ff ff 00  04 72 2f 00 66 3c 10 82
[    42.477] (--) NVIDIA(GPU-0):   15 12 01 03 6c 22 1b 78  f2 3d 85 a6 56 4a 9a 24
[    42.477] (--) NVIDIA(GPU-0):   12 50 e5 bf ef 00 61 46  71 40 71 4f 81 00 81 40
[    42.477] (--) NVIDIA(GPU-0):   81 4a 81 4f 81 80 30 2a  00 e4 51 00 2a 40 30 70
[    42.477] (--) NVIDIA(GPU-0):   13 00 52 0e 11 00 00 1e  00 e4 03 fd 00 31 4b 1e
[    42.477] (--) NVIDIA(GPU-0):   50 0e e4 0a 20 20 20 20  20 20 00 00 00 fc 00 41
[    42.477] (--) NVIDIA(GPU-0):   63 65 72 20 54 31 37 33  0a 20 20 20 00 00 00 ff
[    42.477] (--) NVIDIA(GPU-0):   00 4c 03 41 30 32 30 3e  31 34 31 30 31 0a 00 ef
[    42.477] (--) NVIDIA(GPU-0):
[    42.477] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    42.477] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    42.477] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    42.477] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    42.477] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    42.477] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    42.477] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    42.477] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    42.477] (--) NVIDIA(GPU-0):
[    42.477] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    42.477] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[    42.477] (**) NVIDIA(0):     all display devices.)
[    52.846] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-1 is invalid: the
[    52.846] (WW) NVIDIA(GPU-0):     checksum for EDID version 1 is invalid.
[    52.846] (--) NVIDIA(GPU-0):
[    52.846] (--) NVIDIA(GPU-0): Raw EDID bytes:
[    52.846] (--) NVIDIA(GPU-0):
[    52.846] (--) NVIDIA(GPU-0):   00 ff ff ff ff ff ff 00  04 72 2f 00 66 3c 10 82
[    52.846] (--) NVIDIA(GPU-0):   15 12 01 03 6c 22 1b 78  f2 3d 85 a6 56 4a 9a 24
[    52.846] (--) NVIDIA(GPU-0):   12 50 e5 bf ef 00 61 46  71 40 71 4f 81 00 81 40
[    52.846] (--) NVIDIA(GPU-0):   81 4a 81 4f 81 80 30 2a  00 e4 51 00 2a 40 30 70
[    52.846] (--) NVIDIA(GPU-0):   13 00 52 0e 11 00 00 1e  00 e4 03 fd 00 31 4b 1e
[    52.846] (--) NVIDIA(GPU-0):   50 0e e4 0a 20 20 20 20  20 20 00 00 00 fc 00 41
[    52.846] (--) NVIDIA(GPU-0):   63 65 72 20 54 31 37 33  0a 20 20 20 00 00 00 ff
[    52.846] (--) NVIDIA(GPU-0):   00 4c 03 41 30 32 30 3e  31 34 31 30 31 0a 00 ef
[    52.846] (--) NVIDIA(GPU-0):
[    52.846] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    52.846] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    52.846] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    52.846] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    52.846] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    52.846] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    52.846] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    52.846] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    52.846] (--) NVIDIA(GPU-0):
[    52.846] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    52.846] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[    52.846] (**) NVIDIA(0):     all display devices.)

# Having multiple "Monitor" sections is known to be problematic. Make
# sure you don't have in use another one laying around e.g. in another
# xorg.conf.d file or even a generic xorg.conf file. More details can
# be found in https://bugs.freedesktop.org/show_bug.cgi?id=32430.
#
Section "Monitor"
Identifier "Default Monitor"
#
#  ## If your monitor doesn't support DDC you may override the
#  ## defaults here
  HorizSync 28-85
  VertRefresh 50-100
  DisplaySize 483 272
#
#  ## Add your mode lines here, use e.g the cvt tool
#
  Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
EndSection

# Having multiple "Screen" sections is known to be problematic. Make
# sure you don't have in use another one laying around e.g. in another
# xorg.conf.d file or even a generic xorg.conf file. More details can
# be found in https://bugs.freedesktop.org/show_bug.cgi?id=32430.
#
Section "Screen"
  Identifier  "Screen0"
#
  Device "Default Device"
Monitor "Default Monitor"
Option   "TwinView" "0"
SubSection "Display"
Modes  "1920x1080_60"

EndSubSection
#  ## Doesn't help for radeon/radeonhd drivers; use magic in
#  ## 50-device.conf instead

EndSection

fiver@home:~> uname -a
Linux home 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) i686 i686 i386 GNU/Linux
fiver@home:~> rpm -qa | grep nvidia
fiver@home:~> rpm -qa | grep kernel
kernel-desktop-devel-3.7.10-1.16.1.i686
kernel-devel-3.7.10-1.16.1.noarch
kernel-firmware-20130714git-1.9.1.noarch
kernel-desktop-3.7.10-1.1.1.i686
kernel-source-3.7.10-1.16.1.noarch
kernel-desktop-3.7.10-1.16.1.i686

fiver@home:~> cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 331.20  (buildmeister@swio-display-x64-rhel04-06)  Wed Oct 30 18:38:00 PDT 2013

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 331.20  (buildmeister@swio-display-x64-rhel04-06)  Wed Oct 30 18:37:41 PDT 2013

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CRT-1"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9600 GT"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

fiver@home:~> cat /etc/group | grep video
video:x:33:fiver
fiver@home:~> cat /etc/modprobe.d/50-blacklist.conf | grep nouveau
blacklist nouveau
fiver@home:~> cat /etc/sysconfig/kernel | grep NO_KMS_IN_INITRD
NO_KMS_IN_INITRD="yes"
fiver@home:~> nvidia-settings -v

nvidia-settings:  version 331.20  (buildmeister@swio-display-x64-rhel04-06)  Wed Oct
30 18:37:41 PDT 2013
  The NVIDIA X Server Settings tool.

  This program is used to configure the NVIDIA Linux graphics driver.
  For more detail, please see the nvidia-settings(1) man page.

  Copyright (C) 2004 - 2010 NVIDIA Corporation.

fiver@home:~> grep -i driver /var/log/Xorg.0.log
[    12.225] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    12.225]    X.Org Video Driver: 13.1
[    12.225]    X.Org XInput driver : 18.0
[    12.855] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    12.912]    Module class: X.Org Video Driver
[    12.927] (II) NVIDIA dlloader X Driver  331.20  Wed Oct 30 17:32:26 PDT 2013
[    12.927] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    14.398] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    14.467] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    14.868]    Module class: X.Org XInput Driver
[    14.868]    ABI class: X.Org XInput driver, version 18.0
[    14.868] (II) Using input driver 'evdev' for 'Power Button'
[    14.902] (II) Using input driver 'evdev' for 'Power Button'
[    14.903] (II) No input driver specified, ignoring this device.
[    14.903] (II) No input driver specified, ignoring this device.
[    14.904] (II) No input driver specified, ignoring this device.
[    14.904] (II) No input driver specified, ignoring this device.
[    14.905] (II) No input driver specified, ignoring this device.
[    14.906] (II) No input driver specified, ignoring this device.
[    14.906] (II) No input driver specified, ignoring this device.
[    14.906] (II) No input driver specified, ignoring this device.
[    14.906] (II) Using input driver 'evdev' for 'gspca_pac7302'
[    14.907] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    14.908] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[    14.909] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[    14.918] (II) No input driver specified, ignoring this device.

fiver@home:~> glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: GeForce 9600 GT/PCIe/SSE2
    GL_NV_blend_square, GL_NV_conditional_render, GL_NV_copy_depth_to_color,
    GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
    GL_NVX_conditional_render, GL_NVX_gpu_memory_info,

home:/home/fiver # cat /etc/default/grub | grep GRUB_CMDLINE_LINUX_DEFAULT
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts"

home:/home/fiver # cat /boot/grub2/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="${saved_entry}"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1'  64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
else
  search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
fi
    font="/usr/share/grub2/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=ru_RU
  insmod gettext
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1'  64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
else
  search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
fi
insmod gfxmenu
loadfont ($root)/boot/grub2/themes/openSUSE/ascii.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans10.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans12.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans-Bold14.pf2
insmod png
set theme=($root)/boot/grub2/themes/openSUSE/theme.txt
export theme
if [ x${boot_once} = xtrue ]; then
  set timeout=0
elif sleep --interruptible 0 ; then
  set timeout=8
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'openSUSE 12.3' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
        load_video
        set gfxpayload=keep
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos1'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1'  64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
        else
          search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
        fi
        echo    'Загружается Linux 3.7.10-1.16-desktop …'
        linux   /boot/vmlinuz-3.7.10-1.16-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1  nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts
        echo    'Загружается начальный виртуальный диск …'
        initrd  /boot/initrd-3.7.10-1.16-desktop
}
submenu 'Дополнительные параметры для openSUSE 12.3' $menuentry_id_option 'gnulinux-advanced-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
        menuentry 'openSUSE 12.3, с Linux 3.7.10-1.16-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.16-desktop-advanced-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
                load_video
                set gfxpayload=keep
                insmod gzio
                insmod part_msdos
                insmod ext2
                set root='hd0,msdos1'
                if [ x$feature_platform_search_hint = xy ]; then
                  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1'  64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
                else
                  search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
                fi
                echo    'Загружается Linux 3.7.10-1.16-desktop …'
                linux   /boot/vmlinuz-3.7.10-1.16-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1  nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts
                echo    'Загружается начальный виртуальный диск …'
                initrd  /boot/initrd-3.7.10-1.16-desktop
        }
        menuentry 'openSUSE 12.3, с Linux 3.7.10-1.16-desktop (режим восстановления)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.16-desktop-recovery-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
                load_video
                set gfxpayload=keep
                insmod gzio
                insmod part_msdos
                insmod ext2
                set root='hd0,msdos1'
                if [ x$feature_platform_search_hint = xy ]; then
                  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1'  64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
                else
                  search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
                fi
                echo    'Загружается Linux 3.7.10-1.16-desktop …'
                linux   /boot/vmlinuz-3.7.10-1.16-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1  showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
                echo    'Загружается начальный виртуальный диск …'
                initrd  /boot/initrd-3.7.10-1.16-desktop
        }
        menuentry 'openSUSE 12.3, с Linux 3.7.10-1.1-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.1-desktop-advanced-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
                load_video
                set gfxpayload=keep
                insmod gzio
                insmod part_msdos
                insmod ext2
                set root='hd0,msdos1'
                if [ x$feature_platform_search_hint = xy ]; then
                  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1'  64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
                else
                  search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
                fi
                echo    'Загружается Linux 3.7.10-1.1-desktop …'
                linux   /boot/vmlinuz-3.7.10-1.1-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1  nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts
                echo    'Загружается начальный виртуальный диск …'
                initrd  /boot/initrd-3.7.10-1.1-desktop
        }
        menuentry 'openSUSE 12.3, с Linux 3.7.10-1.1-desktop (режим восстановления)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.1-desktop-recovery-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
                load_video
                set gfxpayload=keep
                insmod gzio
                insmod part_msdos
                insmod ext2
                set root='hd0,msdos1'
                if [ x$feature_platform_search_hint = xy ]; then
                  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1'  64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
                else
                  search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
                fi
                echo    'Загружается Linux 3.7.10-1.1-desktop …'
                linux   /boot/vmlinuz-3.7.10-1.1-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1  showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
                echo    'Загружается начальный виртуальный диск …'
                initrd  /boot/initrd-3.7.10-1.1-desktop
        }
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/20_ppc_terminfo ###
### END /etc/grub.d/20_ppc_terminfo ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

### BEGIN /etc/grub.d/90_persistent ###
### END /etc/grub.d/90_persistent ###

fiver@home:~> cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 331.20  (buildmeister@swio-display-x64-rhel04-06)  Wed Oct 30 18:38:00 PDT 2013

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 331.20  (buildmeister@swio-display-x64-rhel04-06)  Wed Oct 30 18:37:41 PDT 2013

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CRT-1"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9600 GT"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection