Linux Forum — мониторы в suse 13.1

Re: мониторы в suse 13.1

null@example.com (aliaksei1818) — Tue, 26 Aug 2014 14:45:42 +0000

Посмотрел я ваш лог и могу отметить следующее:
Во-первых, ваш монитор виден и как раз по HDMI. Cама же карта находится под управлением свободного драйвера nouveau. А посему вам сюда.
Во-вторых, если вас не устраивает драйвер nouveau (что в данном случае, лучший вариант), то вам нужно создать файл конфигурации xorg.conf. Короче, вам сюда . Но!!! Вы не сможете запустить два экрана одновременно. Более того, если вы переключитесь на внутренний экран ноутбука, то потухнет внешний и вы сможете задействовать его только после перезагрузки.
В-третьих, если вас не устраивает и второй вариант, тогда bumblebee . В этом случае, придется изрядно помучаться с настройкой, и не факт, что все заработает.

Re: мониторы в suse 13.1

null@example.com (Dr.Gera) — Sun, 24 Aug 2014 13:42:39 +0000

Xorg.8.log полностью

+ открыть спойлер

[  8632.058] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[  8632.058] 
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[  8632.058] X Protocol Version 11, Revision 0
[  8632.058] Build Operating System: openSUSE SUSE LINUX
[  8632.058] Current Operating System: Linux linux-s9ht.site 3.11.10-21-desktop #1 SMP PREEMPT Mon Jul 21 15:28:46 UTC 2014 (9a9565d) x86_64
[  8632.058] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-21-desktop root=UUID=fd680518-cec7-44ce-9687-d12e7e5b267b resume=/dev/disk/by-id/ata-WDC_WD6400BPVT-75HXZT3_WD-WXM1A6196440-part5 splash=silent quiet showopts
[  8632.058] Build Date: 17 April 2014  05:37:34AM
[  8632.058]  
[  8632.058] Current version of pixman: 0.30.2
[  8632.058]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  8632.058] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  8632.059] (==) Log file: "/var/log/Xorg.8.log", Time: Sun Aug 24 15:14:26 2014
[  8632.059] (++) Using config file: "/etc/bumblebee/xorg.conf.nouveau"
[  8632.059] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[  8632.059] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  8632.059] (==) ServerLayout "Layout0"
[  8632.059] (==) No screen section available. Using defaults.
[  8632.059] (**) |-->Screen "Default Screen Section" (0)
[  8632.059] (**) |   |-->Monitor ""
[  8632.059] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[  8632.059] (**) |   |-->Device "DiscreteNvidia"
[  8632.059] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[  8632.059] (**) Option "AutoAddDevices" "false"
[  8632.059] (**) Option "AutoAddGPU" "false"
[  8632.059] (**) Not automatically adding devices
[  8632.059] (==) Automatically enabling devices
[  8632.059] (**) Not automatically adding GPU devices
[  8632.059] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[  8632.059]     Entry deleted from font path.
[  8632.059] (==) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/ghostscript/,
    /usr/share/fonts/cyrillic:unscaled,
    /usr/share/fonts/truetype/,
    built-ins
[  8632.059] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[  8632.059] (==) |-->Input Device ""
[  8632.059] (==) |-->Input Device ""
[  8632.059] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
[  8632.059] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
[  8632.059] (II) Loader magic: 0x803c20
[  8632.059] (II) Module ABI versions:
[  8632.059]     X.Org ANSI C Emulation: 0.4
[  8632.059]     X.Org Video Driver: 14.1
[  8632.059]     X.Org XInput driver : 19.1
[  8632.059]     X.Org Server Extension : 7.0
[  8632.060] (II) xfree86: Adding drm device (/dev/dri/card1)
[  8632.060] setversion 1.4 failed
[  8632.060] (II) xfree86: Adding drm device (/dev/dri/card0)
[  8632.060] setversion 1.4 failed
[  8632.061] (--) PCI:*(0:1:0:0) 10de:0df5:1028:04ca rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  8632.061] Initializing built-in extension Generic Event Extension
[  8632.061] Initializing built-in extension SHAPE
[  8632.061] Initializing built-in extension MIT-SHM
[  8632.061] Initializing built-in extension XInputExtension
[  8632.061] Initializing built-in extension XTEST
[  8632.061] Initializing built-in extension BIG-REQUESTS
[  8632.061] Initializing built-in extension SYNC
[  8632.062] Initializing built-in extension XKEYBOARD
[  8632.062] Initializing built-in extension XC-MISC
[  8632.062] Initializing built-in extension SECURITY
[  8632.062] Initializing built-in extension XINERAMA
[  8632.062] Initializing built-in extension XFIXES
[  8632.062] Initializing built-in extension RENDER
[  8632.062] Initializing built-in extension RANDR
[  8632.062] Initializing built-in extension COMPOSITE
[  8632.062] Initializing built-in extension DAMAGE
[  8632.062] Initializing built-in extension MIT-SCREEN-SAVER
[  8632.062] Initializing built-in extension DOUBLE-BUFFER
[  8632.062] Initializing built-in extension RECORD
[  8632.062] Initializing built-in extension DPMS
[  8632.062] Initializing built-in extension X-Resource
[  8632.062] Initializing built-in extension XVideo
[  8632.062] Initializing built-in extension XVideo-MotionCompensation
[  8632.062] Initializing built-in extension XFree86-VidModeExtension
[  8632.062] Initializing built-in extension XFree86-DGA
[  8632.062] Initializing built-in extension XFree86-DRI
[  8632.062] Initializing built-in extension DRI2
[  8632.062] (II) LoadModule: "glx"
[  8632.062] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so
[  8632.078] (II) Module glx: vendor="NVIDIA Corporation"
[  8632.078]     compiled for 4.0.2, module version = 1.0.0
[  8632.078]     Module class: X.Org Server Extension
[  8632.078] (II) NVIDIA GLX Module  340.32  Tue Aug  5 20:32:43 PDT 2014
[  8632.078] Loading extension GLX
[  8632.078] (II) LoadModule: "nouveau"
[  8632.078] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[  8632.079] (II) Module nouveau: vendor="X.Org Foundation"
[  8632.079]     compiled for 1.14.3, module version = 1.0.9
[  8632.079]     Module class: X.Org Video Driver
[  8632.079]     ABI class: X.Org Video Driver, version 14.1
[  8632.079] (II) LoadModule: "mouse"
[  8632.079] (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so
[  8632.079] (II) Module mouse: vendor="X.Org Foundation"
[  8632.079]     compiled for 1.14.3, module version = 1.9.0
[  8632.079]     Module class: X.Org XInput Driver
[  8632.079]     ABI class: X.Org XInput driver, version 19.1
[  8632.079] (II) LoadModule: "kbd"
[  8632.079] (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so
[  8632.079] (II) Module kbd: vendor="X.Org Foundation"
[  8632.079]     compiled for 1.14.3, module version = 1.7.0
[  8632.079]     Module class: X.Org XInput Driver
[  8632.079]     ABI class: X.Org XInput driver, version 19.1
[  8632.079] (II) NOUVEAU driver 
[  8632.079] (II) NOUVEAU driver for NVIDIA chipset families :
[  8632.079]     RIVA TNT        (NV04)
[  8632.079]     RIVA TNT2       (NV05)
[  8632.079]     GeForce 256     (NV10)
[  8632.079]     GeForce 2       (NV11, NV15)
[  8632.079]     GeForce 4MX     (NV17, NV18)
[  8632.079]     GeForce 3       (NV20)
[  8632.079]     GeForce 4Ti     (NV25, NV28)
[  8632.079]     GeForce FX      (NV3x)
[  8632.079]     GeForce 6       (NV4x)
[  8632.079]     GeForce 7       (G7x)
[  8632.080]     GeForce 8       (G8x)
[  8632.080]     GeForce GTX 200 (NVA0)
[  8632.080]     GeForce GTX 400 (NVC0)
[  8632.080] (--) using VT number 7

[  8632.080] (II) [drm] nouveau interface version: 1.1.1
[  8632.080] (II) Loading sub module "dri2"
[  8632.080] (II) LoadModule: "dri2"
[  8632.080] (II) Module "dri2" already built-in
[  8632.080] (EE) NOUVEAU(0): [drm] failed to set drm interface version.
[  8632.080] (EE) NOUVEAU(0): [drm] error opening the drm
[  8632.080] (EE) NOUVEAU(0): 835: 
[  8632.080] (II) UnloadModule: "nouveau"
[  8632.080] (EE) Screen(s) found, but none have a usable configuration.
[  8632.080] (EE) 
Fatal server error:
[  8632.080] (EE) no screens found(EE) 
[  8632.080] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[  8632.080] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[  8632.080] (EE) 
[  8632.080] (EE) Server terminated with error (1). Closing log file.

Re: мониторы в suse 13.1

null@example.com (Dr.Gera) — Sun, 24 Aug 2014 13:41:14 +0000

Вот совсем свежий, после очередной неудачной попытки:
Xorg.0.log .... последние строчки

+ открыть спойлер

[    24.491] (**) Option "TapButton3" "2"
[    24.491] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    24.491] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    24.500] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    24.500] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
[    24.500] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    24.500] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[    24.500] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.132
[    24.500] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    24.500] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    24.500] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    24.500] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    24.500] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    24.500] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    24.500] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    24.500] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    24.500] (II) No input driver specified, ignoring this device.
[    24.500] (II) This device may have been added with another device file.
[    24.502] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[    24.502] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    24.502] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    24.502] (**) Dell WMI hotkeys: Applying InputClass "LocalKeyboard"
[    24.502] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    24.502] (**) Dell WMI hotkeys: always reports core events
[    24.502] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event9"
[    24.502] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    24.502] (--) evdev: Dell WMI hotkeys: Found keys
[    24.502] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    24.502] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[    24.502] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[    24.502] (**) Option "xkb_rules" "evdev"
[    24.502] (**) Option "xkb_model" "pc104"
[    24.502] (**) Option "xkb_layout" "us_intl"
[    24.505] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    44.755] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    44.755] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    44.792] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)

Re: мониторы в suse 13.1

null@example.com (Dr.Gera) — Sun, 24 Aug 2014 13:23:09 +0000

Извеняюсь , что с опазданием так получилось.
Устонавливал Fedore Core 20_x64, пытался там настроить Оптимус, такие-же грабли. При первой перезагрузки чёрный экран. Но там после устоновки цепляет второй монитор. В opensuse 13.1 второй монитор просто бездействует.
Печалька.....

Re: мониторы в suse 13.1

null@example.com (Dr.Gera) — Sun, 24 Aug 2014 13:19:11 +0000

+ открыть спойлер

[ 8632.058]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 8632.058]
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[ 8632.058] X Protocol Version 11, Revision 0
[ 8632.058] Build Operating System: openSUSE SUSE LINUX
[ 8632.058] Current Operating System: Linux linux-s9ht.site 3.11.10-21-desktop #1 SMP PREEMPT Mon Jul 21 15:28:46 UTC 2014 (9a9565d) x86_64
[ 8632.058] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-21-desktop root=UUID=fd680518-cec7-44ce-9687-d12e7e5b267b resume=/dev/disk/by-id/ata-WDC_WD6400BPVT-75HXZT3_WD-WXM1A6196440-part5 splash=silent quiet showopts
[ 8632.058] Build Date: 17 April 2014 05:37:34AM
[ 8632.058]
[ 8632.058] Current version of pixman: 0.30.2
[ 8632.058] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8632.058] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8632.059] (==) Log file: "/var/log/Xorg.8.log", Time: Sun Aug 24 15:14:26 2014
[ 8632.059] (++) Using config file: "/etc/bumblebee/xorg.conf.nouveau"
[ 8632.059] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 8632.059] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8632.059] (==) ServerLayout "Layout0"
[ 8632.059] (==) No screen section available. Using defaults.
[ 8632.059] (**) |-->Screen "Default Screen Section" (0)
[ 8632.059] (**) | |-->Monitor ""
[ 8632.059] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 8632.059] (**) | |-->Device "DiscreteNvidia"
[ 8632.059] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8632.059] (**) Option "AutoAddDevices" "false"
[ 8632.059] (**) Option "AutoAddGPU" "false"
[ 8632.059] (**) Not automatically adding devices
[ 8632.059] (==) Automatically enabling devices
[ 8632.059] (**) Not automatically adding GPU devices
[ 8632.059] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 8632.059] Entry deleted from font path.
[ 8632.059] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 8632.059] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[ 8632.059] (==) |-->Input Device ""
[ 8632.059] (==) |-->Input Device ""
[ 8632.059] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 8632.059] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 8632.059] (II) Loader magic: 0x803c20
[ 8632.059] (II) Module ABI versions:
[ 8632.059] X.Org ANSI C Emulation: 0.4
[ 8632.059] X.Org Video Driver: 14.1
[ 8632.059] X.Org XInput driver : 19.1
[ 8632.059] X.Org Server Extension : 7.0
[ 8632.060] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 8632.060] setversion 1.4 failed
[ 8632.060] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8632.060] setversion 1.4 failed
[ 8632.061] (--) PCI:*(0:1:0:0) 10de:0df5:1028:04ca rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 8632.061] Initializing built-in extension Generic Event Extension
[ 8632.061] Initializing built-in extension SHAPE
[ 8632.061] Initializing built-in extension MIT-SHM
[ 8632.061] Initializing built-in extension XInputExtension
[ 8632.061] Initializing built-in extension XTEST
[ 8632.061] Initializing built-in extension BIG-REQUESTS
[ 8632.061] Initializing built-in extension SYNC
[ 8632.062] Initializing built-in extension XKEYBOARD
[ 8632.062] Initializing built-in extension XC-MISC
[ 8632.062] Initializing built-in extension SECURITY
[ 8632.062] Initializing built-in extension XINERAMA
[ 8632.062] Initializing built-in extension XFIXES
[ 8632.062] Initializing built-in extension RENDER
[ 8632.062] Initializing built-in extension RANDR
[ 8632.062] Initializing built-in extension COMPOSITE
[ 8632.062] Initializing built-in extension DAMAGE
[ 8632.062] Initializing built-in extension MIT-SCREEN-SAVER
[ 8632.062] Initializing built-in extension DOUBLE-BUFFER
[ 8632.062] Initializing built-in extension RECORD
[ 8632.062] Initializing built-in extension DPMS
[ 8632.062] Initializing built-in extension X-Resource
[ 8632.062] Initializing built-in extension XVideo
[ 8632.062] Initializing built-in extension XVideo-MotionCompensation
[ 8632.062] Initializing built-in extension XFree86-VidModeExtension
[ 8632.062] Initializing built-in extension XFree86-DGA
[ 8632.062] Initializing built-in extension XFree86-DRI
[ 8632.062] Initializing built-in extension DRI2
[ 8632.062] (II) LoadModule: "glx"
[ 8632.062] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so
[ 8632.078] (II) Module glx: vendor="NVIDIA Corporation"
[ 8632.078] compiled for 4.0.2, module version = 1.0.0
[ 8632.078] Module class: X.Org Server Extension
[ 8632.078] (II) NVIDIA GLX Module 340.32 Tue Aug 5 20:32:43 PDT 2014
[ 8632.078] Loading extension GLX
[ 8632.078] (II) LoadModule: "nouveau"
[ 8632.078] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 8632.079] (II) Module nouveau: vendor="X.Org Foundation"
[ 8632.079] compiled for 1.14.3, module version = 1.0.9
[ 8632.079] Module class: X.Org Video Driver
[ 8632.079] ABI class: X.Org Video Driver, version 14.1
[ 8632.079] (II) LoadModule: "mouse"
[ 8632.079] (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so
[ 8632.079] (II) Module mouse: vendor="X.Org Foundation"
[ 8632.079] compiled for 1.14.3, module version = 1.9.0
[ 8632.079] Module class: X.Org XInput Driver
[ 8632.079] ABI class: X.Org XInput driver, version 19.1
[ 8632.079] (II) LoadModule: "kbd"
[ 8632.079] (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so
[ 8632.079] (II) Module kbd: vendor="X.Org Foundation"
[ 8632.079] compiled for 1.14.3, module version = 1.7.0
[ 8632.079] Module class: X.Org XInput Driver
[ 8632.079] ABI class: X.Org XInput driver, version 19.1
[ 8632.079] (II) NOUVEAU driver
[ 8632.079] (II) NOUVEAU driver for NVIDIA chipset families :
[ 8632.079] RIVA TNT (NV04)
[ 8632.079] RIVA TNT2 (NV05)
[ 8632.079] GeForce 256 (NV10)
[ 8632.079] GeForce 2 (NV11, NV15)
[ 8632.079] GeForce 4MX (NV17, NV18)
[ 8632.079] GeForce 3 (NV20)
[ 8632.079] GeForce 4Ti (NV25, NV28)
[ 8632.079] GeForce FX (NV3x)
[ 8632.079] GeForce 6 (NV4x)
[ 8632.079] GeForce 7 (G7x)
[ 8632.080] GeForce 8 (G8x)
[ 8632.080] GeForce GTX 200 (NVA0)
[ 8632.080] GeForce GTX 400 (NVC0)
[ 8632.080] (--) using VT number 7

[ 8632.080] (II) [drm] nouveau interface version: 1.1.1
[ 8632.080] (II) Loading sub module "dri2"
[ 8632.080] (II) LoadModule: "dri2"
[ 8632.080] (II) Module "dri2" already built-in
[ 8632.080] (EE) NOUVEAU(0): [drm] failed to set drm interface version.
[ 8632.080] (EE) NOUVEAU(0): [drm] error opening the drm
[ 8632.080] (EE) NOUVEAU(0): 835:
[ 8632.080] (II) UnloadModule: "nouveau"
[ 8632.080] (EE) Screen(s) found, but none have a usable configuration.
[ 8632.080] (EE)
Fatal server error:
[ 8632.080] (EE) no screens found(EE)
[ 8632.080] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 8632.080] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 8632.080] (EE)
[ 8632.080] (EE) Server terminated with error (1). Closing log file.

Re: мониторы в suse 13.1

null@example.com (Dr.Gera) — Sun, 24 Aug 2014 13:18:40 +0000

+ открыть спойлер

[    25.014] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    25.014] 
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[    25.014] X Protocol Version 11, Revision 0
[    25.014] Build Operating System: openSUSE SUSE LINUX
[    25.014] Current Operating System: Linux linux-s9ht.site 3.11.10-21-desktop #1 SMP PREEMPT Mon Jul 21 15:28:46 UTC 2014 (9a9565d) x86_64
[    25.015] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-21-desktop root=UUID=fd680518-cec7-44ce-9687-d12e7e5b267b resume=/dev/disk/by-id/ata-WDC_WD6400BPVT-75HXZT3_WD-WXM1A6196440-part5 splash=silent quiet showopts
[    25.015] Build Date: 17 April 2014  05:37:34AM
[    25.015]  
[    25.015] Current version of pixman: 0.30.2
[    25.015]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    25.015] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.015] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 24 16:50:59 2014
[    25.015] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    25.015] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.052] (==) No Layout section.  Using the first Screen section.
[    25.052] (==) No screen section available. Using defaults.
[    25.052] (**) |-->Screen "Default Screen Section" (0)
[    25.052] (**) |   |-->Monitor ""
[    25.053] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    25.053] (==) Automatically adding devices
[    25.053] (==) Automatically enabling devices
[    25.053] (==) Automatically adding GPU devices
[    25.063] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    25.063]     Entry deleted from font path.
[    25.063] (==) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/ghostscript/,
    /usr/share/fonts/cyrillic:unscaled,
    /usr/share/fonts/truetype/,
    built-ins
[    25.063] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[    25.063] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.064] (II) Loader magic: 0x803c20
[    25.064] (II) Module ABI versions:
[    25.064]     X.Org ANSI C Emulation: 0.4
[    25.064]     X.Org Video Driver: 14.1
[    25.064]     X.Org XInput driver : 19.1
[    25.064]     X.Org Server Extension : 7.0
[    25.064] (II) xfree86: Adding drm device (/dev/dri/card1)
[    25.064] (II) xfree86: Adding drm device (/dev/dri/card0)
[    25.066] (--) PCI:*(0:0:2:0) 8086:0116:1028:04ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    25.066] (--) PCI: (0:1:0:0) 10de:0df5:1028:04ca rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    25.067] Initializing built-in extension Generic Event Extension
[    25.067] Initializing built-in extension SHAPE
[    25.067] Initializing built-in extension MIT-SHM
[    25.067] Initializing built-in extension XInputExtension
[    25.067] Initializing built-in extension XTEST
[    25.067] Initializing built-in extension BIG-REQUESTS
[    25.067] Initializing built-in extension SYNC
[    25.067] Initializing built-in extension XKEYBOARD
[    25.067] Initializing built-in extension XC-MISC
[    25.067] Initializing built-in extension SECURITY
[    25.067] Initializing built-in extension XINERAMA
[    25.067] Initializing built-in extension XFIXES
[    25.067] Initializing built-in extension RENDER
[    25.067] Initializing built-in extension RANDR
[    25.067] Initializing built-in extension COMPOSITE
[    25.067] Initializing built-in extension DAMAGE
[    25.067] Initializing built-in extension MIT-SCREEN-SAVER
[    25.067] Initializing built-in extension DOUBLE-BUFFER
[    25.067] Initializing built-in extension RECORD
[    25.067] Initializing built-in extension DPMS
[    25.067] Initializing built-in extension X-Resource
[    25.067] Initializing built-in extension XVideo
[    25.067] Initializing built-in extension XVideo-MotionCompensation
[    25.067] Initializing built-in extension XFree86-VidModeExtension
[    25.067] Initializing built-in extension XFree86-DGA
[    25.067] Initializing built-in extension XFree86-DRI
[    25.067] Initializing built-in extension DRI2
[    25.067] (II) "glx" will be loaded by default.
[    25.067] (II) LoadModule: "dri2"
[    25.067] (II) Module "dri2" already built-in
[    25.067] (II) LoadModule: "glamoregl"
[    25.091] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[    25.190] (II) Module glamoregl: vendor="X.Org Foundation"
[    25.190]     compiled for 1.14.3.901, module version = 0.5.1
[    25.190]     ABI class: X.Org ANSI C Emulation, version 0.4
[    25.190] (II) LoadModule: "glx"
[    25.191] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    25.210] (II) Module glx: vendor="X.Org Foundation"
[    25.210]     compiled for 1.14.3.901, module version = 1.0.0
[    25.210]     ABI class: X.Org Server Extension, version 7.0
[    25.210] (==) AIGLX enabled
[    25.211] Loading extension GLX
[    25.211] (==) Matched intel as autoconfigured driver 0
[    25.211] (==) Matched nvidia as autoconfigured driver 1
[    25.211] (==) Matched nouveau as autoconfigured driver 2
[    25.211] (==) Matched nv as autoconfigured driver 3
[    25.211] (==) Matched intel as autoconfigured driver 4
[    25.211] (==) Matched modesetting as autoconfigured driver 5
[    25.211] (==) Matched fbdev as autoconfigured driver 6
[    25.211] (==) Matched vesa as autoconfigured driver 7
[    25.211] (==) Assigned the driver to the xf86ConfigLayout
[    25.211] (II) LoadModule: "intel"
[    25.212] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[    25.250] (II) Module intel: vendor="X.Org Foundation"
[    25.250]     compiled for 1.14.3.901, module version = 2.99.906
[    25.250]     Module class: X.Org Video Driver
[    25.250]     ABI class: X.Org Video Driver, version 14.1
[    25.250] (II) LoadModule: "nvidia"
[    25.251] (WW) Warning, couldn't open module nvidia
[    25.251] (II) UnloadModule: "nvidia"
[    25.251] (II) Unloading nvidia
[    25.251] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    25.251] (II) LoadModule: "nouveau"
[    25.251] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[    25.251] (II) Module nouveau: vendor="X.Org Foundation"
[    25.251]     compiled for 1.14.3, module version = 1.0.9
[    25.251]     Module class: X.Org Video Driver
[    25.251]     ABI class: X.Org Video Driver, version 14.1
[    25.251] (II) LoadModule: "nv"
[    25.252] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
[    25.252] (II) Module nv: vendor="X.Org Foundation"
[    25.252]     compiled for 1.14.3, module version = 2.1.20
[    25.252]     Module class: X.Org Video Driver
[    25.252]     ABI class: X.Org Video Driver, version 14.1
[    25.252] (II) LoadModule: "modesetting"
[    25.252] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    25.261] (II) Module modesetting: vendor="X.Org Foundation"
[    25.261]     compiled for 1.14.3.901, module version = 0.8.0
[    25.261]     Module class: X.Org Video Driver
[    25.261]     ABI class: X.Org Video Driver, version 14.1
[    25.261] (II) LoadModule: "fbdev"
[    25.262] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    25.262] (II) Module fbdev: vendor="X.Org Foundation"
[    25.262]     compiled for 1.14.3, module version = 0.4.3
[    25.262]     Module class: X.Org Video Driver
[    25.262]     ABI class: X.Org Video Driver, version 14.1
[    25.262] (II) LoadModule: "vesa"
[    25.262] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    25.262] (II) Module vesa: vendor="X.Org Foundation"
[    25.262]     compiled for 1.14.3, module version = 2.3.3
[    25.262]     Module class: X.Org Video Driver
[    25.262]     ABI class: X.Org Video Driver, version 14.1
[    25.262] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    25.263] (II) NOUVEAU driver 
[    25.263] (II) NOUVEAU driver for NVIDIA chipset families :
[    25.263]     RIVA TNT        (NV04)
[    25.263]     RIVA TNT2       (NV05)
[    25.263]     GeForce 256     (NV10)
[    25.263]     GeForce 2       (NV11, NV15)
[    25.263]     GeForce 4MX     (NV17, NV18)
[    25.263]     GeForce 3       (NV20)
[    25.263]     GeForce 4Ti     (NV25, NV28)
[    25.263]     GeForce FX      (NV3x)
[    25.263]     GeForce 6       (NV4x)
[    25.263]     GeForce 7       (G7x)
[    25.263]     GeForce 8       (G8x)
[    25.263]     GeForce GTX 200 (NVA0)
[    25.263]     GeForce GTX 400 (NVC0)
[    25.263] (II) NOUVEAU driver 
[    25.263] (II) NOUVEAU driver for NVIDIA chipset families :
[    25.263]     RIVA TNT        (NV04)
[    25.263]     RIVA TNT2       (NV05)
[    25.263]     GeForce 256     (NV10)
[    25.263]     GeForce 2       (NV11, NV15)
[    25.263]     GeForce 4MX     (NV17, NV18)
[    25.263]     GeForce 3       (NV20)
[    25.263]     GeForce 4Ti     (NV25, NV28)
[    25.263]     GeForce FX      (NV3x)
[    25.263]     GeForce 6       (NV4x)
[    25.263]     GeForce 7       (G7x)
[    25.264]     GeForce 8       (G8x)
[    25.264]     GeForce GTX 200 (NVA0)
[    25.264]     GeForce GTX 400 (NVC0)
[    25.264] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    25.264] (II) FBDEV: driver for framebuffer: fbdev
[    25.264] (II) VESA: driver for VESA chipsets: vesa
[    25.264] (++) using VT number 7

[    25.266] (II) [drm] nouveau interface version: 1.1.1
[    25.266] (WW) Falling back to old probe method for modesetting
[    25.266] (WW) Falling back to old probe method for fbdev
[    25.266] (II) Loading sub module "fbdevhw"
[    25.266] (II) LoadModule: "fbdevhw"
[    25.267] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    25.274] (II) Module fbdevhw: vendor="X.Org Foundation"
[    25.274]     compiled for 1.14.3.901, module version = 0.0.2
[    25.274]     ABI class: X.Org Video Driver, version 14.1
[    25.274] (WW) Falling back to old probe method for vesa
[    25.275] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    25.275] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    25.275] (==) intel(0): RGB weight 888
[    25.275] (==) intel(0): Default visual is TrueColor
[    25.276] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[    25.276] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[    25.276] (**) intel(0): Framebuffer tiled
[    25.276] (**) intel(0): Pixmaps tiled
[    25.276] (**) intel(0): "Tear free" disabled
[    25.276] (**) intel(0): Forcing per-crtc-pixmaps? no
[    25.276] (II) intel(0): Output LVDS1 has no monitor section
[    25.276] (--) intel(0): found backlight control interface acpi_video1 (type 'firmware')
[    25.276] (II) intel(0): Output VGA1 has no monitor section
[    25.276] (II) intel(0): Output VIRTUAL1 has no monitor section
[    25.276] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[    25.276] (==) intel(0): DPI set to (96, 96)
[    25.276] (II) Loading sub module "dri2"
[    25.276] (II) LoadModule: "dri2"
[    25.276] (II) Module "dri2" already built-in
[    25.276] (II) Loading sub module "dri2"
[    25.276] (II) LoadModule: "dri2"
[    25.276] (II) Module "dri2" already built-in
[    25.276] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[    25.276] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    25.276] (==) NOUVEAU(G0): RGB weight 888
[    25.276] (==) NOUVEAU(G0): Default visual is TrueColor
[    25.276] (==) NOUVEAU(G0): Using HW cursor
[    25.276] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[    25.276] (==) NOUVEAU(G0): Page flipping enabled
[    25.276] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[    25.291] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[    25.352] (II) NOUVEAU(G0): Output HDMI-1-1 has no monitor section
[    25.363] (II) NOUVEAU(G0): EDID for output VGA-1-2
[    25.363] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[    25.363] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.363] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.363] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    25.363] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    25.363] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    25.424] (II) NOUVEAU(G0): EDID for output HDMI-1-1
[    25.424] (II) NOUVEAU(G0): Manufacturer: HWP  Model: 3032  Serial#: 16843009
[    25.424] (II) NOUVEAU(G0): Year: 2013  Week: 49
[    25.424] (II) NOUVEAU(G0): EDID Version: 1.3
[    25.424] (II) NOUVEAU(G0): Digital Display Input
[    25.424] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    25.424] (II) NOUVEAU(G0): Gamma: 2.20
[    25.424] (II) NOUVEAU(G0): DPMS capabilities: Off
[    25.424] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    25.424] (II) NOUVEAU(G0): First detailed timing is preferred mode
[    25.424] (II) NOUVEAU(G0): redX: 0.636 redY: 0.334   greenX: 0.309 greenY: 0.623
[    25.424] (II) NOUVEAU(G0): blueX: 0.150 blueY: 0.067   whiteX: 0.313 whiteY: 0.329
[    25.424] (II) NOUVEAU(G0): Supported established timings:
[    25.424] (II) NOUVEAU(G0): 720x400@70Hz
[    25.424] (II) NOUVEAU(G0): 640x480@60Hz
[    25.424] (II) NOUVEAU(G0): 800x600@60Hz
[    25.424] (II) NOUVEAU(G0): 1024x768@60Hz
[    25.424] (II) NOUVEAU(G0): Manufacturer's mask: 0
[    25.424] (II) NOUVEAU(G0): Supported standard timings:
[    25.424] (II) NOUVEAU(G0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    25.424] (II) NOUVEAU(G0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    25.424] (II) NOUVEAU(G0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    25.424] (II) NOUVEAU(G0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    25.424] (II) NOUVEAU(G0): #4: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    25.424] (II) NOUVEAU(G0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    25.424] (II) NOUVEAU(G0): Supported detailed timing:
[    25.424] (II) NOUVEAU(G0): clock: 148.5 MHz   Image Size:  509 x 286 mm
[    25.424] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    25.424] (II) NOUVEAU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    25.424] (II) NOUVEAU(G0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 94 kHz, PixClock max 175 MHz
[    25.424] (II) NOUVEAU(G0): Monitor name: HP 23xi
[    25.424] (II) NOUVEAU(G0): Serial No: 3CM34903Y2
[    25.424] (II) NOUVEAU(G0): Supported detailed timing:
[    25.424] (II) NOUVEAU(G0): clock: 148.5 MHz   Image Size:  509 x 286 mm
[    25.424] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    25.424] (II) NOUVEAU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    25.424] (II) NOUVEAU(G0): Supported detailed timing:
[    25.424] (II) NOUVEAU(G0): clock: 148.5 MHz   Image Size:  509 x 286 mm
[    25.424] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    25.424] (II) NOUVEAU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    25.424] (II) NOUVEAU(G0): Supported detailed timing:
[    25.424] (II) NOUVEAU(G0): clock: 74.2 MHz   Image Size:  509 x 286 mm
[    25.424] (II) NOUVEAU(G0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    25.424] (II) NOUVEAU(G0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    25.424] (II) NOUVEAU(G0): Supported detailed timing:
[    25.424] (II) NOUVEAU(G0): clock: 74.2 MHz   Image Size:  509 x 286 mm
[    25.424] (II) NOUVEAU(G0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    25.424] (II) NOUVEAU(G0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    25.424] (II) NOUVEAU(G0): Supported detailed timing:
[    25.424] (II) NOUVEAU(G0): clock: 27.0 MHz   Image Size:  509 x 286 mm
[    25.424] (II) NOUVEAU(G0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    25.424] (II) NOUVEAU(G0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    25.424] (II) NOUVEAU(G0): Number of EDID sections to follow: 1
[    25.424] (II) NOUVEAU(G0): EDID (in hex):
[    25.424] (II) NOUVEAU(G0):     00ffffffffffff0022f0323001010101
[    25.424] (II) NOUVEAU(G0):     3117010380331d782ae295a2554f9f26
[    25.424] (II) NOUVEAU(G0):     115054a10800d1c081c081809500a9c0
[    25.424] (II) NOUVEAU(G0):     b30001010101023a801871382d40582c
[    25.424] (II) NOUVEAU(G0):     4500fd1e1100001a000000fd00324c18
[    25.424] (II) NOUVEAU(G0):     5e11000a202020202020000000fc0048
[    25.424] (II) NOUVEAU(G0):     5020323378690a2020202020000000ff
[    25.424] (II) NOUVEAU(G0):     0033434d333439303359320a20200164
[    25.424] (II) NOUVEAU(G0):     020314b249909f041303021211016503
[    25.424] (II) NOUVEAU(G0):     0c001000023a801871382d40582c4500
[    25.424] (II) NOUVEAU(G0):     fd1e1100001e023a80d072382d40102c
[    25.424] (II) NOUVEAU(G0):     4580fd1e1100001e011d007251d01e20
[    25.424] (II) NOUVEAU(G0):     6e285500fd1e1100001e011d00bc52d0
[    25.424] (II) NOUVEAU(G0):     1e20b8285540fd1e1100001e8c0ad08a
[    25.424] (II) NOUVEAU(G0):     20e02d10103e9600fd1e110000180000
[    25.424] (II) NOUVEAU(G0):     0000000000000000000000000000009c
[    25.424] (II) NOUVEAU(G0): Printing probed modes for output HDMI-1-1
[    25.424] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
[    25.424] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "1600x900"x60.0  118.96  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[    25.424] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.424] (II) NOUVEAU(G0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.424] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    25.424] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    25.424] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    25.424] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.424] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    25.424] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.424] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    25.424] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    25.424] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    25.424] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    25.424] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    25.424] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    25.424] (==) NOUVEAU(G0): DPI set to (96, 96)
[    25.424] (II) Loading sub module "fb"
[    25.424] (II) LoadModule: "fb"
[    25.425] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    25.434] (II) Module fb: vendor="X.Org Foundation"
[    25.434]     compiled for 1.14.3.901, module version = 1.0.0
[    25.434]     ABI class: X.Org ANSI C Emulation, version 0.4
[    25.434] (II) Loading sub module "exa"
[    25.434] (II) LoadModule: "exa"
[    25.434] (II) Loading /usr/lib64/xorg/modules/libexa.so
[    25.443] (II) Module exa: vendor="X.Org Foundation"
[    25.443]     compiled for 1.14.3.901, module version = 2.6.0
[    25.443]     ABI class: X.Org Video Driver, version 14.1
[    25.443] (II) Loading sub module "shadowfb"
[    25.443] (II) LoadModule: "shadowfb"
[    25.444] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[    25.451] (II) Module shadowfb: vendor="X.Org Foundation"
[    25.451]     compiled for 1.14.3.901, module version = 1.0.0
[    25.451]     ABI class: X.Org ANSI C Emulation, version 0.4
[    25.451] (II) UnloadModule: "nv"
[    25.451] (II) Unloading nv
[    25.451] (II) UnloadModule: "modesetting"
[    25.451] (II) Unloading modesetting
[    25.451] (II) UnloadModule: "fbdev"
[    25.451] (II) Unloading fbdev
[    25.451] (II) UnloadSubModule: "fbdevhw"
[    25.451] (II) Unloading fbdevhw
[    25.451] (II) UnloadModule: "vesa"
[    25.451] (II) Unloading vesa
[    25.451] (==) Depth 24 pixmap format is 32 bpp
[    25.453] (II) NOUVEAU(G0): Opened GPU channel 0
[    25.458] (II) NOUVEAU(G0): [DRI2] Setup complete
[    25.458] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    25.458] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    25.459] (II) EXA(256): Driver allocated offscreen pixmaps
[    25.459] (II) EXA(256): Driver registered support for the following operations:
[    25.459] (II)         Solid
[    25.459] (II)         Copy
[    25.459] (II)         Composite (RENDER acceleration)
[    25.459] (II)         UploadToScreen
[    25.459] (II)         DownloadFromScreen
[    25.459] (==) NOUVEAU(G0): Backing store disabled
[    25.459] (==) NOUVEAU(G0): Silken mouse enabled
[    25.459] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    25.459] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    25.459] (==) NOUVEAU(G0): DPMS enabled
[    25.459] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    25.462] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[    25.462] (==) intel(0): Backing store disabled
[    25.462] (==) intel(0): Silken mouse enabled
[    25.462] (II) intel(0): HW Cursor enabled
[    25.462] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    25.462] (==) intel(0): DPMS enabled
[    25.462] (II) intel(0): [DRI2] Setup complete
[    25.462] (II) intel(0): [DRI2]   DRI driver: i965
[    25.462] (II) intel(0): direct rendering: DRI2 Enabled
[    25.462] (==) intel(0): hotplug detection: "enabled"
[    25.462] (--) RandR disabled
[    25.606] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    25.606] (II) AIGLX: enabled GLX_INTEL_swap_event
[    25.606] (II) AIGLX: enabled GLX_ARB_create_context
[    25.606] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    25.606] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    25.606] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    25.606] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    25.606] (II) AIGLX: Loaded and initialized i965
[    25.606] (II) GLX: Initialized DRI2 GL provider for screen 0
[    25.608] (II) NOUVEAU(G0): NVEnterVT is called.
[    25.611] (II) intel(0): switch to mode 1366x768@60.0 on pipe 0 using LVDS1, position (0, 0), rotation normal
[    25.633] (II) intel(0): Setting screen physical size to 361 x 203
[    25.732] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    25.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.733] (**) Power Button: Applying InputClass "LocalKeyboard"
[    25.733] (II) LoadModule: "evdev"
[    25.733] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    25.733] (II) Module evdev: vendor="X.Org Foundation"
[    25.733]     compiled for 1.14.3, module version = 2.8.2
[    25.733]     Module class: X.Org XInput Driver
[    25.733]     ABI class: X.Org XInput driver, version 19.1
[    25.733] (II) Using input driver 'evdev' for 'Power Button'
[    25.733] (**) Power Button: always reports core events
[    25.733] (**) evdev: Power Button: Device: "/dev/input/event6"
[    25.733] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.733] (--) evdev: Power Button: Found keys
[    25.733] (II) evdev: Power Button: Configuring as keyboard
[    25.733] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[    25.733] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    25.733] (**) Option "xkb_rules" "evdev"
[    25.733] (**) Option "xkb_model" "pc104"
[    25.733] (**) Option "xkb_layout" "us_intl"
[    25.763] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    25.763] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    25.763] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    25.763] (**) Video Bus: Applying InputClass "LocalKeyboard"
[    25.763] (II) Using input driver 'evdev' for 'Video Bus'
[    25.763] (**) Video Bus: always reports core events
[    25.763] (**) evdev: Video Bus: Device: "/dev/input/event9"
[    25.763] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    25.763] (--) evdev: Video Bus: Found keys
[    25.763] (II) evdev: Video Bus: Configuring as keyboard
[    25.763] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9"
[    25.763] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    25.763] (**) Option "xkb_rules" "evdev"
[    25.764] (**) Option "xkb_model" "pc104"
[    25.764] (**) Option "xkb_layout" "us_intl"
[    25.764] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    25.764] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    25.764] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    25.764] (**) Video Bus: Applying InputClass "LocalKeyboard"
[    25.764] (II) Using input driver 'evdev' for 'Video Bus'
[    25.764] (**) Video Bus: always reports core events
[    25.764] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    25.764] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    25.764] (--) evdev: Video Bus: Found keys
[    25.764] (II) evdev: Video Bus: Configuring as keyboard
[    25.764] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/LNXVIDEO:00/input/input8/event8"
[    25.764] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    25.764] (**) Option "xkb_rules" "evdev"
[    25.764] (**) Option "xkb_model" "pc104"
[    25.764] (**) Option "xkb_layout" "us_intl"
[    25.765] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    25.765] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.765] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.765] (**) Power Button: Applying InputClass "LocalKeyboard"
[    25.765] (II) Using input driver 'evdev' for 'Power Button'
[    25.765] (**) Power Button: always reports core events
[    25.765] (**) evdev: Power Button: Device: "/dev/input/event4"
[    25.765] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.765] (--) evdev: Power Button: Found keys
[    25.765] (II) evdev: Power Button: Configuring as keyboard
[    25.765] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[    25.765] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    25.765] (**) Option "xkb_rules" "evdev"
[    25.765] (**) Option "xkb_model" "pc104"
[    25.765] (**) Option "xkb_layout" "us_intl"
[    25.765] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    25.765] (II) No input driver specified, ignoring this device.
[    25.765] (II) This device may have been added with another device file.
[    25.766] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    25.766] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    25.766] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    25.766] (**) Sleep Button: Applying InputClass "LocalKeyboard"
[    25.766] (II) Using input driver 'evdev' for 'Sleep Button'
[    25.766] (**) Sleep Button: always reports core events
[    25.766] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[    25.766] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    25.766] (--) evdev: Sleep Button: Found keys
[    25.766] (II) evdev: Sleep Button: Configuring as keyboard
[    25.766] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[    25.766] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    25.766] (**) Option "xkb_rules" "evdev"
[    25.766] (**) Option "xkb_model" "pc104"
[    25.766] (**) Option "xkb_layout" "us_intl"
[    25.766] (II) config/udev: Adding drm device (/dev/dri/card1)
[    25.766] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[    25.766] (II) No input driver specified, ignoring this device.
[    25.766] (II) This device may have been added with another device file.
[    25.767] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[    25.767] (II) No input driver specified, ignoring this device.
[    25.767] (II) This device may have been added with another device file.
[    25.767] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[    25.767] (II) No input driver specified, ignoring this device.
[    25.767] (II) This device may have been added with another device file.
[    25.767] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[    25.767] (II) No input driver specified, ignoring this device.
[    25.767] (II) This device may have been added with another device file.
[    25.767] (II) config/udev: Adding drm device (/dev/dri/card0)
[    25.768] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event19)
[    25.768] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    25.768] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    25.768] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "LocalKeyboard"
[    25.768] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[    25.768] (**) Laptop_Integrated_Webcam_HD: always reports core events
[    25.768] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event19"
[    25.768] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xc45 Product 0x6442
[    25.768] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[    25.768] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[    25.768] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input19/event19"
[    25.768] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[    25.768] (**) Option "xkb_rules" "evdev"
[    25.768] (**) Option "xkb_model" "pc104"
[    25.768] (**) Option "xkb_layout" "us_intl"
[    25.768] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[    25.768] (II) No input driver specified, ignoring this device.
[    25.768] (II) This device may have been added with another device file.
[    25.768] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    25.768] (II) No input driver specified, ignoring this device.
[    25.768] (II) This device may have been added with another device file.
[    25.769] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[    25.769] (II) No input driver specified, ignoring this device.
[    25.769] (II) This device may have been added with another device file.
[    25.769] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/event7)
[    25.769] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[    25.769] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[    25.769] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[    25.769] (**)  USB OPTICAL MOUSE: always reports core events
[    25.769] (**) evdev:  USB OPTICAL MOUSE: Device: "/dev/input/event7"
[    25.769] (--) evdev:  USB OPTICAL MOUSE: Vendor 0x2188 Product 0xae1
[    25.769] (--) evdev:  USB OPTICAL MOUSE: Found 3 mouse buttons
[    25.769] (--) evdev:  USB OPTICAL MOUSE: Found scroll wheel(s)
[    25.769] (--) evdev:  USB OPTICAL MOUSE: Found relative axes
[    25.769] (--) evdev:  USB OPTICAL MOUSE: Found x and y relative axes
[    25.769] (II) evdev:  USB OPTICAL MOUSE: Configuring as mouse
[    25.769] (II) evdev:  USB OPTICAL MOUSE: Adding scrollwheel support
[    25.769] (**) evdev:  USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[    25.769] (**) evdev:  USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.769] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-2/3-2:1.0/input/input7/event7"
[    25.769] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 12)
[    25.769] (II) evdev:  USB OPTICAL MOUSE: initialized for relative axes.
[    25.769] (**)  USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[    25.769] (**)  USB OPTICAL MOUSE: (accel) acceleration profile 0
[    25.770] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[    25.770] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[    25.770] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/mouse2)
[    25.770] (II) No input driver specified, ignoring this device.
[    25.770] (II) This device may have been added with another device file.
[    25.770] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    25.770] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    25.770] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    25.770] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[    25.770] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    25.770] (**) AT Translated Set 2 keyboard: always reports core events
[    25.770] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    25.770] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    25.770] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    25.770] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    25.770] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    25.770] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    25.770] (**) Option "xkb_rules" "evdev"
[    25.770] (**) Option "xkb_model" "pc104"
[    25.770] (**) Option "xkb_layout" "us_intl"
[    25.771] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event1)
[    25.771] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    25.771] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    25.771] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    25.771] (**) PS/2 Mouse: always reports core events
[    25.771] (**) evdev: PS/2 Mouse: Device: "/dev/input/event1"
[    25.771] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    25.771] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    25.771] (--) evdev: PS/2 Mouse: Found relative axes
[    25.771] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    25.771] (II) evdev: PS/2 Mouse: Configuring as mouse
[    25.771] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    25.771] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.771] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[    25.771] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 14)
[    25.771] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    25.771] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    25.771] (**) PS/2 Mouse: (accel) acceleration profile 0
[    25.771] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    25.771] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    25.771] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[    25.771] (II) No input driver specified, ignoring this device.
[    25.771] (II) This device may have been added with another device file.
[    25.771] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event2)
[    25.772] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    25.772] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    25.772] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    25.772] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[    25.772] (II) LoadModule: "synaptics"
[    25.772] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    25.772] (II) Module synaptics: vendor="X.Org Foundation"
[    25.772]     compiled for 1.14.3, module version = 1.7.1
[    25.772]     Module class: X.Org XInput Driver
[    25.772]     ABI class: X.Org XInput driver, version 19.1
[    25.772] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    25.772] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    25.772] (**) Option "Device" "/dev/input/event2"
[    25.791] (II) synaptics: AlpsPS/2 ALPS GlidePoint: ignoring touch events for semi-multitouch device
[    25.791] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1360 (res 0)
[    25.791] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 660 (res 0)
[    25.791] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    25.791] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    25.791] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle double triple
[    25.791] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    25.791] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    25.791] (**) Option "HorizScrollDelta" "0"
[    25.791] (**) Option "TapButton1" "1"
[    25.791] (**) Option "TapButton2" "3"
[    25.791] (**) Option "TapButton3" "2"
[    25.791] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    25.791] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    25.800] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    25.800] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 15)
[    25.800] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    25.800] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[    25.800] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.132
[    25.800] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    25.800] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    25.800] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    25.800] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    25.801] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    25.801] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    25.801] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    25.801] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[    25.801] (II) No input driver specified, ignoring this device.
[    25.801] (II) This device may have been added with another device file.
[    25.804] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event11)
[    25.804] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    25.804] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    25.804] (**) Dell WMI hotkeys: Applying InputClass "LocalKeyboard"
[    25.804] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    25.804] (**) Dell WMI hotkeys: always reports core events
[    25.804] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event11"
[    25.804] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    25.804] (--) evdev: Dell WMI hotkeys: Found keys
[    25.804] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    25.804] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11"
[    25.804] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[    25.804] (**) Option "xkb_rules" "evdev"
[    25.804] (**) Option "xkb_model" "pc104"
[    25.804] (**) Option "xkb_layout" "us_intl"
[    41.905] (II) intel(0): EDID vendor "AUO", prod id 8940
[    41.905] (II) intel(0): Printing DDC gathered Modelines:
[    41.905] (II) intel(0): Modeline "1366x768"x0.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz eP)
[  1410.224] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card2 /dev/dri/card2
[  1410.224] (II) config/udev: Adding drm device (/dev/dri/card2)
[  1410.224] (II) xfree86: Adding drm device (/dev/dri/card2)
[  1410.367] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card2 /dev/dri/card2

Re: мониторы в suse 13.1

null@example.com (aliaksei1818) — Tue, 05 Aug 2014 14:46:55 +0000

Покажите логи:
/var/log/Xorg.0.log
/var/log/Xorg.8.log

Re: мониторы в suse 13.1

null@example.com (Dr.Gera) — Mon, 04 Aug 2014 20:04:45 +0000

Всем доброго времени суток. Скажите тема ещё жива. Аналогичная ситуация, такой же ноутбук вот монитор другой HP. Но у меня он обсалютно монитор не видит, не по HDMI, не по VDI .
Я все страницы читал, всё проделывал один в один. Но дело в том, что Nvidia-seting пустой, не отображает мой монитор HP
http://s019.radikal.ru/i622/1408/e9/b8f8fbe1896c.png
http://s019.radikal.ru/i604/1408/f1/064a3d53642d.png
Спасибо может будет у кого время свободное , готов выслушать инструкции.
З.Ы. В Windows 7 работает нормально по HDMI

Re: мониторы в suse 13.1

null@example.com (aliaksei1818) — Tue, 28 Jan 2014 20:55:51 +0000

Необходимо написать простенький скрипт определяющий статус монитора по HDMI-порту (где-то в директории /sys/class/*) и если условие не выполняется, то должна выполняться команда:

xrandr --setprovideroutputsource Intel NVIDIA-0

В общем как-то так…

Re: мониторы в suse 13.1

null@example.com (Toha821) — Tue, 28 Jan 2014 19:24:10 +0000

тыц тыц

Re: мониторы в suse 13.1

null@example.com (Toha821) — Sat, 18 Jan 2014 10:08:49 +0000

все конечно замечательно)) Но тут недавно взял бук на работу. запускаю сюську а она мне средний палец в ответ. вместо рабочего стола я вижу консоль)) то есть сюся тупо не работает без плазмы))

Re: мониторы в suse 13.1

null@example.com (verg) — Tue, 17 Dec 2013 08:03:39 +0000

Toha821 пишет:

прикольно. теперь реп nvidia именно 13.1 не работает. снесли его. остался реп 12.2 и 12.3. как теперь дрова ставить? нвидиа там с ума посходили чтоли

Репа вернулась на место.

Re: мониторы в suse 13.1

null@example.com (Toha821) — Sun, 15 Dec 2013 19:26:47 +0000

aliaksei1818 пишет:

Со звуком создайте отдельную тему, но по HDMI можем и не завести.

Хорошо. И спасибо вам большое за помощь. Чесно. ЕСли даже со звуком вдруг и не решим,я динамики подключу.

Вопрос решен.

Re: мониторы в suse 13.1

null@example.com (aliaksei1818) — Sun, 15 Dec 2013 19:22:33 +0000

Со звуком создайте отдельную тему, но по HDMI можем и не завести.

Re: мониторы в suse 13.1

null@example.com (Toha821) — Sun, 15 Dec 2013 19:15:47 +0000

aliaksei1818 пишет:

+ открыть спойлер
Section "ServerLayout"
Identifier "layout"
Screen 0 "nvidia"
Inactive "intel"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "UseDisplayDevice" "DFP-0"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
Option "ModeValidation" "DFP-0: ObeyEdidContradictions"
Option "IgnoreDisplayDevices" "CRT-0"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
DefaultDepth 24
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "intel"
Device "intel"
EndSection

все. все зашибись. красава. осталась проблема это звук. его нету почему то