ATTR{idVendor}=="0924", ATTR{idProduct}=="4265", ATTR{product}=="USB Scanner", MODE="664", GROUP="scanner"
LABEL="libsane_rules_end"
и
# ls -l /etc/udev/rules.d/45-libsane.rules
-rw-r--r-- 1 root root 208 Сен 5 17:51 /etc/udev/rules.d/45-libsane.rules
(xsane:3637): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
но программа нормально работает
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x0924 [Xerox], product=0x4265 [WorkCentre 3119 Series]) at libusb:005:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
а после
ls -la /dev/bus/usb/005/004
пишет
crw-rw-r-- 1 root root 189, 515 Сен 5 18:03 /dev/bus/usb/005/004
а как убрать себя группы root?
на команду
groups dmitry
пишет
dmitry root adm dialout fax cdrom floppy tape audio dip video plugdev scanner netdev lpadmin powerdev fuse
А зачем Вы себя в группу root добавили?
]]>ACTION!="add", SUBSYSTEM!="usb", DRIVER!="usb", GOTO="libsane_rules_end"
ATTR{idVendor}=="0924", ATTR{idProduct}=="4265", ATTR{product}=="USB Scanner", MODE="664", GROUP="scanner"
LABEL="libsane_rules_end"Udevinfo starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:1d.7/usb5/5-5':
KERNEL=="5-5"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{configuration}==""
ATTR{bNumInterfaces}==" 2"
ATTR{bConfigurationValue}=="1"
ATTR{bmAttributes}=="c0"
ATTR{bMaxPower}==" 2mA"
ATTR{urbnum}=="14"
ATTR{idVendor}=="0924"
ATTR{idProduct}=="4265"
ATTR{bcdDevice}=="0100"
ATTR{bDeviceClass}=="00"
ATTR{bDeviceSubClass}=="00"
ATTR{bDeviceProtocol}=="00"
ATTR{bNumConfigurations}=="1"
ATTR{bMaxPacketSize0}=="64"
ATTR{speed}=="480"
ATTR{busnum}=="5"
ATTR{devnum}=="4"
ATTR{version}==" 2.00"
ATTR{maxchild}=="0"
ATTR{quirks}=="0x0"
ATTR{authorized}=="1"
ATTR{manufacturer}=="Xerox"
ATTR{product}=="WorkCentre 3119 Series"
ATTR{serial}=="BMA383199978...."
looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb5':
KERNELS=="usb5"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="65"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0002"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="480"
ATTRS{busnum}=="5"
ATTRS{devnum}=="1"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="8"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.26-2-686 ehci_hcd"
ATTRS{product}=="EHCI Host Controller"
ATTRS{serial}=="0000:00:1d.7"
ATTRS{authorized_default}=="1"
looking at parent device '/devices/pci0000:00/0000:00:1d.7':
KERNELS=="0000:00:1d.7"
SUBSYSTEMS=="pci"
DRIVERS=="ehci_hcd"
ATTRS{vendor}=="0x8086"
ATTRS{device}=="0x24dd"
ATTRS{subsystem_vendor}=="0x1849"
ATTRS{subsystem_device}=="0x24d0"
ATTRS{class}=="0x0c0320"
ATTRS{irq}=="23"
ATTRS{local_cpus}=="ff"
ATTRS{local_cpulist}=="0-7"
ATTRS{modalias}=="pci:v00008086d000024DDsv00001849sd000024D0bc0Csc03i20"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
ввел
nano /etc/udev/rules.d/45-libsane.rules
и сохранил вот это
ACTION!="add", SUBSYSTEM!="usb", DRIVER!="usb", GOTO="libsane_rules_end"
ATTR{idVendor}=="0924", ATTR{idProduct}=="4265", ATTR{product}=="WorkCentre 3119 Series
", MODE="664", GROUP="scanner"
LABEL="libsane_rules_end"
перезагрузился