1

На windows всё работало без проблем. Сейчас windows на пк уже нету и ставить не буду.
Вот лог из dmesg

+ открыть спойлер

 Консоль:
[    0.000000] Linux version 4.7.0-0.bpo.1-amd64 (stevep@mxlinux.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP MX 4.7.8-1mx16+2 (2016-12-08)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-0.bpo.1-amd64 root=UUID=5b1a3183-73a2-43e4-9671-68d22a74c690 ro
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffbffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffc0000-0x000000003ffcdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ffce000-0x000000003ffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: ECS 761GX-M754/761GX-M754-964, BIOS 080012  02/27/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: pci 0000:00:00:00: AGP bridge
[    0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf0000000-0xf1ffffff] (old size 32MB)
[    0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf0000000-0xf3ffffff] (64MB, APSIZE 0xf30)
[    0.000000] e820: last_pfn = 0x3ffc0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x2a14e000, 0x2a14efff] PGTABLE
[    0.000000] BRK [0x2a14f000, 0x2a14ffff] PGTABLE
[    0.000000] BRK [0x2a150000, 0x2a150fff] PGTABLE
[    0.000000] BRK [0x2a151000, 0x2a151fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3546e000-0x36a2efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F93B0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x000000003FFC0000 000034 (v01 A M I  OEMRSDT  02000727 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000003FFC0200 000084 (v02 A M I  OEMFACP  02000727 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x000000003FFC0430 00432D (v01 761GX  761GX964 00000000 INTL 02002026)
[    0.000000] ACPI: FACS 0x000000003FFCE000 000040
[    0.000000] ACPI: APIC 0x000000003FFC0390 000054 (v01 A M I  OEMAPIC  02000727 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x000000003FFC03F0 00003C (v01 A M I  OEMMCFG  02000727 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x000000003FFCE040 000047 (v01 A M I  AMI_OEM  02000727 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000003ffbffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x3ffbb000-0x3ffbffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000003ffbffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffbffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffbffff]
[    0.000000] On node 0 totalpages: 261982
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 4031 pages used for memmap
[    0.000000]   DMA32 zone: 257984 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xff77ffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 34 pages/cpu @ffff88003fc00000 s99608 r8192 d31464 u2097152
[    0.000000] pcpu-alloc: s99608 r8192 d31464 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 257866
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-0.bpo.1-amd64 root=UUID=5b1a3183-73a2-43e4-9671-68d22a74c690 ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: pci 0000:00:00:00: AGP bridge
[    0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf0000000-0xf1ffffff] (old size 32MB)
[    0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf0000000-0xf3ffffff] (64MB, APSIZE 0xf30)
[    0.000000] AGP: Node 0: aperture [bus addr 0x2120000000-0x2121ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 995128K/1047928K available (6032K kernel code, 1169K rwdata, 2816K rodata, 1368K init, 808K bss, 52800K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.000000] NR_IRQS:33024 nr_irqs:256 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1800.038 MHz processor
[    0.001014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.07 BogoMIPS (lpj=1800038)
[    0.001117] pid_max: default: 32768 minimum: 301
[    0.001186] ACPI: Core revision 20160422
[    0.006745] ACPI: 1 ACPI AML tables successfully acquired and loaded

[    0.006982] Security Framework initialized
[    0.007006] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.007069] AppArmor: AppArmor disabled by boot time parameter
[    0.007259] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.008375] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.008944] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.009010] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.009576] mce: CPU supports 5 MCE banks
[    0.009643] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.009694] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.016909] Freeing SMP alternatives memory: 24K (ffffffffaa07c000 - ffffffffaa082000)
[    0.018788] ftrace: allocating 24780 entries in 97 pages
[    0.028107] smpboot: Max logical packages: 1
[    0.028164] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.028533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.039000] smpboot: CPU0: AMD Sempron(tm) Processor 3000+ (family: 0xf, model: 0x2c, stepping: 0x2)
[    0.039000] Performance Events: AMD PMU driver.
[    0.039000] ... version:                0
[    0.039000] ... bit width:              48
[    0.039000] ... generic registers:      4
[    0.039000] ... value mask:             0000ffffffffffff
[    0.039000] ... max period:             00007fffffffffff
[    0.039000] ... fixed-purpose events:   0
[    0.039000] ... event mask:             000000000000000f
[    0.039451] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.039555] x86: Booted up 1 node, 1 CPUs
[    0.039605] smpboot: Total of 1 processors activated (3600.07 BogoMIPS)
[    0.040115] devtmpfs: initialized
[    0.040280] x86/mm: Memory block size: 128MB
[    0.046386] PM: Registering ACPI NVS region [mem 0x3ffce000-0x3ffeffff] (139264 bytes)
[    0.046549] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.046666] pinctrl core: initialized pinctrl subsystem
[    0.046959] NET: Registered protocol family 16
[    0.047268] cpuidle: using governor ladder
[    0.047320] cpuidle: using governor menu
[    0.047372] node 0 link 0: io port [1000, ffffff]
[    0.047376] TOM: 0000000040000000 aka 1024M
[    0.047425] node 0 link 0: mmio [e0000000, efffffff]
[    0.047430] node 0 link 0: mmio [a0000, bffff]
[    0.047432] node 0 link 0: mmio [40000000, ffffffff]
[    0.047436] bus: [bus 00-ff] on node 0 link 0
[    0.047438] bus: 00 [io  0x0000-0xffff]
[    0.047440] bus: 00 [mem 0x40000000-0xfcffffffff]
[    0.047441] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.047484] ACPI: bus type PCI registered
[    0.047534] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.047696] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.047762] PCI: not using MMCONFIG
[    0.047810] PCI: Using configuration type 1 for base access
[    0.049211] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.049671] ACPI: Added _OSI(Module Device)
[    0.049726] ACPI: Added _OSI(Processor Device)
[    0.049774] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.049823] ACPI: Added _OSI(Processor Aggregator Device)
[    0.050082] ACPI Error: Invalid type (Method) for target of Scope operator [PCI0] (Cannot override) (20160422/dswload2-255)
[    0.050220] ACPI Exception: AE_AML_OPERAND_TYPE, During name lookup/catalog (20160422/psobject-227)
[    0.050351] ACPI Error: Method parse/execution failed [\_SB.PCI0] (Node ffff88003e03e2a8), AE_AML_OPERAND_TYPE (20160422/psparse-542)
[    0.050642] ACPI: Executed 3 blocks of module-level executable AML code
[    0.055045] ACPI: Interpreter enabled
[    0.055126] ACPI: (supports S0 S1 S4 S5)
[    0.055175] ACPI: Using IOAPIC for interrupt routing
[    0.055277] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.058094] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.058187] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.069173] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.069238] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.069308] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.069666] PCI host bridge to bus 0000:00
[    0.069719] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.069772] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.069824] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.069887] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.069949] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff window]
[    0.070010] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.070072] pci 0000:00:00.0: [1039:0761] type 00 class 0x060000
[    0.070085] pci 0000:00:00.0: reg 0x10: [mem 0xf0000000-0xf3ffffff]
[    0.070243] pci 0000:00:01.0: [1039:0004] type 01 class 0x060400
[    0.070302] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.070416] pci 0000:00:02.0: [1039:0964] type 00 class 0x060100
[    0.070557] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
[    0.070594] pci 0000:00:02.5: reg 0x20: [io  0xffa0-0xffaf]
[    0.070608] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.070662] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.070714] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.070766] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.070835] pci 0000:00:02.5: PME# supported from D3cold
[    0.070938] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[    0.070951] pci 0000:00:02.7: reg 0x10: [io  0xe800-0xe8ff]
[    0.070958] pci 0000:00:02.7: reg 0x14: [io  0xe400-0xe47f]
[    0.071039] pci 0000:00:02.7: supports D1 D2
[    0.071042] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.071093] pci 0000:00:02.7: System wakeup disabled by ACPI
[    0.071201] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[    0.071211] pci 0000:00:03.0: reg 0x10: [mem 0xdffff000-0xdfffffff]
[    0.071297] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.071404] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[    0.071415] pci 0000:00:03.1: reg 0x10: [mem 0xdfffe000-0xdfffefff]
[    0.071498] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.071606] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
[    0.071616] pci 0000:00:03.2: reg 0x10: [mem 0xdfffd000-0xdfffdfff]
[    0.071700] pci 0000:00:03.2: System wakeup disabled by ACPI
[    0.071808] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[    0.071820] pci 0000:00:03.3: reg 0x10: [mem 0xdfffc000-0xdfffcfff]
[    0.071869] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.071917] pci 0000:00:03.3: System wakeup disabled by ACPI
[    0.072041] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
[    0.072054] pci 0000:00:04.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.072062] pci 0000:00:04.0: reg 0x14: [mem 0xdfffb000-0xdfffbfff]
[    0.072090] pci 0000:00:04.0: reg 0x30: [mem 0xdffc0000-0xdffdffff pref]
[    0.072112] pci 0000:00:04.0: supports D1 D2
[    0.072115] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.072164] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.072274] pci 0000:00:05.0: [1039:0181] type 00 class 0x010185
[    0.072285] pci 0000:00:05.0: reg 0x10: [io  0xd800-0xd807]
[    0.072293] pci 0000:00:05.0: reg 0x14: [io  0xd400-0xd403]
[    0.072300] pci 0000:00:05.0: reg 0x18: [io  0xd000-0xd007]
[    0.072307] pci 0000:00:05.0: reg 0x1c: [io  0xc800-0xc803]
[    0.072314] pci 0000:00:05.0: reg 0x20: [io  0xc400-0xc40f]
[    0.072346] pci 0000:00:05.0: PME# supported from D3cold
[    0.072463] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.072561] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.072656] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.072750] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.072919] pci 0000:01:00.0: [10de:0140] type 00 class 0x030000
[    0.072931] pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff]
[    0.072941] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.072951] pci 0000:01:00.0: reg 0x1c: [mem 0xfd000000-0xfdffffff 64bit]
[    0.072963] pci 0000:01:00.0: reg 0x30: [mem 0xfebe0000-0xfebfffff pref]
[    0.073071] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.073144] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.073199] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfebfffff]
[    0.073204] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.075698] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.076202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.076696] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.079031] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.079525] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.080021] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
[    0.080517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.081014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.081709] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.081766] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.081828] vgaarb: loaded
[    0.081875] vgaarb: bridge control possible 0000:01:00.0
[    0.082094] PCI: Using ACPI for IRQ routing
[    0.088068] PCI: pci_cache_line_size set to 64 bytes
[    0.088109] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.088113] e820: reserve RAM buffer [mem 0x3ffc0000-0x3fffffff]
[    0.088452] clocksource: Switched to clocksource refined-jiffies
[    0.102207] VFS: Disk quotas dquot_6.6.0
[    0.102305] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.102526] pnp: PnP ACPI init
[    0.102687] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.103360] pnp 00:01: [dma 0 disabled]
[    0.103495] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.105157] pnp 00:02: [dma 3]
[    0.105491] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.106295] system 00:03: [io  0x0a00-0x0a0f] has been reserved
[    0.106353] system 00:03: [io  0x0a10-0x0a1f] has been reserved
[    0.106404] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.106456] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.106510] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.106720] system 00:04: [io  0x0480-0x048f] has been reserved
[    0.106774] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.106825] system 00:04: [io  0x0800-0x08df] has been reserved
[    0.106877] system 00:04: [io  0x08e0-0x08ff] has been reserved
[    0.106930] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.106982] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
[    0.107007] system 00:04: [mem 0xffe80000-0xffefffff] has been reserved
[    0.107060] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.107115] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.107248] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.107303] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.107358] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.107447] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.107502] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.107754] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.107809] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.107862] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.107915] system 00:07: [mem 0x00100000-0x3fffffff] could not be reserved
[    0.108010] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.108190] pnp: PnP ACPI: found 8 devices
[    0.115389] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.115476] clocksource: Switched to clocksource acpi_pm
[    0.115562] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.115616] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfebfffff]
[    0.115670] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.115738] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.115741] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.115744] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.115747] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.115749] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffffffff window]
[    0.115752] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfebfffff]
[    0.115755] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.115819] NET: Registered protocol family 2
[    0.115973] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.115973] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.115973] TCP: Hash tables configured (established 8192 bind 8192)
[    0.116190] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.116263] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.116442] NET: Registered protocol family 1
[    0.116510] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.313311] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.313381] PCI: CLS 64 bytes, default 64
[    0.313473] Unpacking initramfs...
[    0.992161] Freeing initrd memory: 22276K (ffff88003546e000 - ffff880036a2f000)
[    0.992361] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0761]
[    0.994614] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[    0.995264] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.995356] audit: initializing netlink subsys (disabled)
[    0.995442] audit: type=2000 audit(1488486976.994:1): initialized
[    0.995985] Initialise system trusted keyrings
[    0.996227] workingset: timestamp_bits=37 max_order=18 bucket_order=0
[    0.996302] zbud: loaded
[    1.084313] Key type asymmetric registered
[    1.084369] Asymmetric key parser 'x509' registered
[    1.084470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.084601] io scheduler noop registered
[    1.084650] io scheduler deadline registered
[    1.084713] io scheduler cfq registered (default)
[    1.084920] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.084978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.085232] GHES: HEST is not enabled!
[    1.085384] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.106057] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.106692] Linux agpgart interface v0.103
[    1.106789] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.106839] AMD IOMMUv2 functionality not available on this system
[    1.107117] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.107511] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.107571] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.107855] mousedev: PS/2 mouse device common for all mice
[    1.107981] rtc_cmos 00:00: RTC can wake from S4
[    1.108241] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.108320] rtc_cmos 00:00: alarms up to one year, 114 bytes nvram
[    1.108393] ledtrig-cpu: registered to indicate activity on CPUs
[    1.109107] NET: Registered protocol family 10
[    1.109562] mip6: Mobile IPv6
[    1.109618] NET: Registered protocol family 17
[    1.109669] mpls_gso: MPLS GSO support
[    1.109916] microcode: AMD CPU family 0xf not supported
[    1.110211] registered taskstats version 1
[    1.110264] Loading compiled-in X.509 certificates
[    1.113791] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.114444] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.114549] zswap: loaded using pool lzo/zbud
[    1.115035] rtc_cmos 00:00: setting system clock to 2017-03-02 20:36:17 UTC (1488486977)
[    1.115178] PM: Hibernation image not present or could not be loaded.
[    1.118190] Freeing unused kernel memory: 1368K (ffffffffa9f26000 - ffffffffaa07c000)
[    1.118261] Write protecting the kernel read-only data: 10240k
[    1.118630] Freeing unused kernel memory: 96K (ffff8800299e8000 - ffff880029a00000)
[    1.124660] Freeing unused kernel memory: 1280K (ffff880029cc0000 - ffff880029e00000)
[    1.141157] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.269313] systemd-udevd[73]: starting version 215
[    1.271207] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[    1.306615] fjes: module verification failed: signature and/or required key missing - tainting kernel
[    1.307082] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.336483] SCSI subsystem initialized
[    1.339238] [Firmware Bug]: Invalid critical threshold (103)
[    1.339300] [Firmware Bug]: No valid trip found
[    1.343441] sis900.c: v1.08.10 Apr. 2 2006
[    1.354438] ACPI: bus type USB registered
[    1.354534] usbcore: registered new interface driver usbfs
[    1.354599] usbcore: registered new interface driver hub
[    1.361099] usbcore: registered new device driver usb
[    1.363340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.364197] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.364671] ehci-pci: EHCI PCI platform driver
[    1.366993] libata version 3.00 loaded.
[    1.389725] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 31.
[    1.390441] 0000:00:04.0: Using transceiver found at address 31 as default
[    1.396346] eth0: SiS 900 PCI Fast Ethernet at 0x000000000001e000, IRQ 19, 00:16:ec:07:c4:3c
[    1.397270] ehci-pci 0000:00:03.3: EHCI Host Controller
[    1.397340] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[    1.397453] ehci-pci 0000:00:03.3: cache line size of 64 is not supported
[    1.397473] ehci-pci 0000:00:03.3: irq 23, io mem 0xdfffc000
[    1.403333] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    1.403513] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.403567] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.403629] usb usb1: Product: EHCI Host Controller
[    1.403679] usb usb1: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 ehci_hcd
[    1.403730] usb usb1: SerialNumber: 0000:00:03.3
[    1.404048] hub 1-0:1.0: USB hub found
[    1.404117] hub 1-0:1.0: 8 ports detected
[    1.404472] pata_sis 0000:00:02.5: version 0.5.2
[    1.404499] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[    1.406478] ohci-pci: OHCI PCI platform driver
[    1.414387] scsi host0: pata_sis
[    1.425662] scsi host1: pata_sis
[    1.425822] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.425875] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.426208] ohci-pci 0000:00:03.0: OHCI PCI host controller
[    1.426278] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[    1.426386] ohci-pci 0000:00:03.0: irq 20, io mem 0xdffff000
[    1.479094] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.479154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.479217] usb usb2: Product: OHCI PCI host controller
[    1.479267] usb usb2: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 ohci_hcd
[    1.479319] usb usb2: SerialNumber: 0000:00:03.0
[    1.479614] hub 2-0:1.0: USB hub found
[    1.479675] hub 2-0:1.0: 3 ports detected
[    1.480128] ohci-pci 0000:00:03.1: OHCI PCI host controller
[    1.480197] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[    1.480312] ohci-pci 0000:00:03.1: irq 21, io mem 0xdfffe000
[    1.533077] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.533134] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.533196] usb usb3: Product: OHCI PCI host controller
[    1.533246] usb usb3: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 ohci_hcd
[    1.533297] usb usb3: SerialNumber: 0000:00:03.1
[    1.533790] hub 3-0:1.0: USB hub found
[    1.533859] hub 3-0:1.0: 3 ports detected
[    1.534313] ohci-pci 0000:00:03.2: OHCI PCI host controller
[    1.534380] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
[    1.534492] ohci-pci 0000:00:03.2: irq 22, io mem 0xdfffd000
[    1.590077] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.590134] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.590196] usb usb4: Product: OHCI PCI host controller
[    1.590246] usb usb4: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 ohci_hcd
[    1.590297] usb usb4: SerialNumber: 0000:00:03.2
[    1.590815] hub 4-0:1.0: USB hub found
[    1.590887] hub 4-0:1.0: 2 ports detected
[    1.728508] sata_sis 0000:00:05.0: version 1.0
[    1.728658] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[    1.730084] scsi host2: sata_sis
[    1.730475] scsi host3: sata_sis
[    1.730636] ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xc400 irq 17
[    1.730691] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xc408 irq 17
[    1.948016] usb 4-1: new low-speed USB device number 2 using ohci-pci
[    1.968012] usb 2-2: new low-speed USB device number 2 using ohci-pci
[    1.996016] tsc: Refined TSC clocksource calibration: 1800.064 MHz
[    1.996069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f26623e55, max_idle_ns: 440795282553 ns
[    2.034227] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.036832] ata3.00: ATA-7: Hitachi HDS721680PLA380, P21OABEA, max UDMA/133
[    2.036885] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.041678] ata3.00: configured for UDMA/133
[    2.041973] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDS72168 ABEA PQ: 0 ANSI: 5
[    2.138040] usb 4-1: New USB device found, idVendor=09da, idProduct=c10a
[    2.138100] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.138152] usb 4-1: Product: USB Mouse
[    2.138201] usb 4-1: Manufacturer: A4Tech
[    2.144397] hidraw: raw HID events driver (C) Jiri Kosina
[    2.152920] usbcore: registered new interface driver usbhid
[    2.152979] usbhid: USB HID core driver
[    2.155076] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0/0003:09DA:C10A.0001/input/input3
[    2.156638] hid-generic 0003:09DA:C10A.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:03.2-1/input0
[    2.162056] usb 2-2: New USB device found, idVendor=045e, idProduct=0750
[    2.162116] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.162168] usb 2-2: Product: Wired Keyboard 600
[    2.162218] usb 2-2: Manufacturer: Microsoft
[    2.184566] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/0003:045E:0750.0002/input/input4
[    2.235466] microsoft 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:03.0-2/input0
[    2.239456] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.1/0003:045E:0750.0003/input/input5
[    2.290221] microsoft 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:03.0-2/input1
[    2.355898] ata4: SATA link down (SStatus 0 SControl 300)
[    2.360419] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.360548] sd 2:0:0:0: [sda] Write Protect is off
[    2.360600] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.360627] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.416578]  sda: sda1 sda2 sda3 < sda5 > sda4
[    2.417645] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.419224] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.996101] clocksource: Switched to clocksource tsc
[    3.062619] random: nonblocking pool is initialized
[    4.392031] floppy0: no floppy controllers found
[    4.392100] work still pending
[    4.412282] device-mapper: uevent: version 1.0.3
[    4.413145] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    4.441093] raid6: sse2x1   gen()   453 MB/s
[    4.458004] raid6: sse2x1   xor()  2054 MB/s
[    4.475073] raid6: sse2x2   gen()   875 MB/s
[    4.492007] raid6: sse2x2   xor()  2316 MB/s
[    4.509039] raid6: sse2x4   gen()  1324 MB/s
[    4.526014] raid6: sse2x4   xor()  1455 MB/s
[    4.526062] raid6: using algorithm sse2x4 gen() 1324 MB/s
[    4.526112] raid6: .... xor() 1455 MB/s, rmw enabled
[    4.526161] raid6: using intx1 recovery algorithm
[    4.526977] xor: measuring software checksum speed
[    4.537004]    prefetch64-sse:  4784.000 MB/sec
[    4.547003]    generic_sse:  4788.000 MB/sec
[    4.547052] xor: using function: generic_sse (4788.000 MB/sec)
[    4.567490] Btrfs loaded, crc32c=crc32c-generic
[    4.567547] BTRFS: selftest: sectorsize: 4096  nodesize: 4096
[    4.567597] BTRFS: selftest: sectorsize: 4096  nodesize: 8192
[    4.567648] BTRFS: selftest: sectorsize: 4096  nodesize: 16384
[    4.567697] BTRFS: selftest: sectorsize: 4096  nodesize: 32768
[    4.567747] BTRFS: selftest: sectorsize: 4096  nodesize: 65536
[    4.924372] PM: Starting manual resume from disk
[    4.924435] PM: Hibernation image partition 8:4 present
[    4.924437] PM: Looking for hibernation image.
[    4.924831] PM: Image not found (code -22)
[    4.924835] PM: Hibernation image not present or could not be loaded.
[    4.930116] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[    4.930123] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[    4.930126] PM: Basic memory bitmaps created
[    4.946805] PM: Basic memory bitmaps freed
[   10.173530] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[   10.173611] REISERFS (device sda1): using ordered data mode
[   10.173661] reiserfs: using flush barriers
[   10.207995] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   10.210324] REISERFS (device sda1): checking transaction log (sda1)
[   10.253655] REISERFS (device sda1): Using r5 hash to sort names
[   12.279209] systemd-udevd[321]: starting version 215
[   12.986351] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[   12.986427] ACPI: Power Button [PWRB]
[   12.986559] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   12.986622] ACPI: Power Button [PWRF]
[   13.068433] sis630_smbus 0000:00:02.0: SIS630 compatible bus not detected, module not inserted.
[   13.093158] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.407445] parport_pc 00:02: reported by Plug and Play ACPI
[   13.407613] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   13.553801] [drm] Initialized drm 1.1.0 20060810
[   13.690524] MPU-401 device not found or device busy
[   13.824387] wmi: Mapper loaded
[   13.911031] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 50670 usecs (2438 samples)
[   13.911105] snd_intel8x0 0000:00:02.7: clocking to 48000
[   13.982736] sis900 0000:00:04.0 eth2: renamed from eth0
[   13.983066] systemd-udevd[363]: renamed network interface eth0 to eth2
[   14.118324] powernow_k8: [Firmware Bug]: No PSB or ACPI _PSS objects
[   14.118384] powernow_k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[   14.120643] powernow_k8: Found 1 AMD Sempron(tm) Processor 3000+ (1 cpu cores) (version 2.20.00)
[   14.506627] ppdev: user-space parallel port driver
[   14.870364] nouveau 0000:01:00.0: NVIDIA NV43 (043000a4)
[   14.902730] nouveau 0000:01:00.0: bios: version 05.43.02.66.00
[   14.904513] nouveau 0000:01:00.0: fb: 256 MiB GDDR3
[   15.434024] usb 1-2: new high-speed USB device number 4 using ehci-pci
[   15.549833] usb 1-2: New USB device found, idVendor=04a9, idProduct=176e
[   15.549892] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   15.549945] usb 1-2: Product: MG3500 series
[   15.549993] usb 1-2: Manufacturer: Canon
[   15.550047] usb 1-2: SerialNumber: 440642
[   15.751664] adt7475 2-002e: ADT7473 device, revision 7
[   15.751722] adt7475 2-002e: Optional features: fan4
[   15.873796] i2c i2c-2: found f75375 version: 15
[   15.894176] [TTM] Zone  kernel: Available graphics memory: 510086 kiB
[   15.894232] [TTM] Initializing pool allocator
[   15.894287] [TTM] Initializing DMA pool allocator
[   15.894360] nouveau 0000:01:00.0: DRM: VRAM: 252 MiB
[   15.894410] nouveau 0000:01:00.0: DRM: GART: 512 MiB
[   15.894463] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[   15.894514] nouveau 0000:01:00.0: DRM: DCB version 3.0
[   15.894565] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[   15.894617] nouveau 0000:01:00.0: DRM: DCB outp 01: 04011312 00000000
[   15.894669] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[   15.894720] nouveau 0000:01:00.0: DRM: DCB outp 03: 020223f1 0004c080
[   15.894772] nouveau 0000:01:00.0: DRM: DCB conn 00: 0000
[   15.894822] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130
[   15.894872] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210
[   15.894922] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211
[   15.894972] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213
[   15.895557] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[   15.949853] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.949911] [drm] Driver supports precise vblank timestamp query.
[   15.952246] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[   15.952320] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
[   16.043529] nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x9000, bo ffff88003c17e000
[   16.043864] fbcon: nouveaufb (fb0) is primary device
[   16.066884] nouveau 0000:01:00.0: DRM: 0xD576: Parsing digital output script table
[   16.117120] floppy0: no floppy controllers found
[   16.117132] work still pending
[   16.217261] Console: switching to colour frame buffer device 180x56
[   16.218757] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   16.218773] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[   16.854684] usblp 1-2:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176E
[   16.854748] usbcore: registered new interface driver usblp
[   20.303966] Adding 2148348k swap on /dev/sda4.  Priority:-1 extents:1 across:2148348k FS
[   20.547840] reiserfs: enabling write barrier flush mode
[   20.954121] lp0: using parport0 (interrupt-driven).
[   21.020369] loop: module loaded
[   21.143400] fuse init (API version 7.25)
[   23.005340] ip_tables: (C) 2000-2006 Netfilter Core Team
[   23.031539] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   23.082629] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.692851] RPC: Registered named UNIX socket transport module.
[   24.693207] RPC: Registered udp transport module.
[   24.693491] RPC: Registered tcp transport module.
[   24.693771] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   24.722836] FS-Cache: Loaded
[   24.773910] FS-Cache: Netfs 'nfs' registered for caching
[   24.830119] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   26.091905] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[   29.345108] usblp1: removed
[   29.445172] usblp 1-2:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176E
[   33.704308] systemd-logind[2248]: New seat seat0.
[   33.736312] systemd-logind[2248]: Watching system buttons on /dev/input/event4 (Power Button)
[   33.736888] systemd-logind[2248]: Watching system buttons on /dev/input/event3 (Power Button)
[   33.868662] eth2: Media Link Off
[   39.121899] systemd-logind[2248]: Failed to start user service: Unknown unit: user@1000.service
[   39.134990] systemd-logind[2248]: New session 1 of user admin.
[   45.353261] nouveau 0000:01:00.0: DRM: 0xD57D: Parsing digital output script table
[   47.880684] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   48.177399] eth2: Media Link Off
[  142.729013] usb 1-1: new high-speed USB device number 5 using ehci-pci
[  142.843862] usb 1-1: New USB device found, idVendor=0bb4, idProduct=0c03
[  142.843870] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  142.843873] usb 1-1: Product: MT65xx Android Phone
[  142.843875] usb 1-1: Manufacturer: MediaTek
[  142.843877] usb 1-1: SerialNumber: 0123456789ABCDEF
[  143.232558] usb 1-1: USB disconnect, device number 5
[  143.436732] usbcore: registered new interface driver usb-storage
[  143.443120] usbcore: registered new interface driver uas
[  143.543033] usb 1-1: new high-speed USB device number 6 using ehci-pci
[  143.657866] usb 1-1: New USB device found, idVendor=0bb4, idProduct=0004
[  143.657873] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  143.657876] usb 1-1: Product: MT65xx Android Phone
[  143.657878] usb 1-1: Manufacturer: MediaTek
[  143.657881] usb 1-1: SerialNumber: 0123456789ABCDEF
[  144.218700] usbcore: registered new interface driver cdc_ether
[  144.230352] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-0000:00:03.3-1, RNDIS device, 82:af:d1:70:b2:7f
[  144.230410] usbcore: registered new interface driver rndis_host
[  190.299636] usblp1: removed
[  190.303586] usblp 1-2:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176E
[ 1611.560965] usblp1: removed
[ 1614.267364] [UFW BLOCK] IN=usb0 OUT= MAC= SRC=fe80:0000:0000:0000:80af:d1ff:fe70:b27f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=884775 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1614.267413] [UFW BLOCK] IN=usb0 OUT= MAC= SRC=fe80:0000:0000:0000:80af:d1ff:fe70:b27f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=820120 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1614.277676] [UFW BLOCK] IN=usb0 OUT= MAC= SRC=fe80:0000:0000:0000:80af:d1ff:fe70:b27f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=884775 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1614.277737] [UFW BLOCK] IN=usb0 OUT= MAC= SRC=fe80:0000:0000:0000:80af:d1ff:fe70:b27f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=820120 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1717.840112] usblp 1-2:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176E

Пытаюсь напечатать файл командой lpr. Выполняю

 Консоль:
lpr -T "print1" -# 1 print.txt

Потом запрашиваю статус устройства
 Консоль:
lpc status
MG3500-series:
    printer is on device 'usb' speed -1
    queuing is enabled
    printing is enabled
    1 entries
    daemon present

Проверяю очередь печати
 Консоль:
lpq
MG3500-series is ready and printing
Rank    Owner   Job     File(s)                         Total Size
active  admin   11      print1                          5120 bytes

Печатать принтер начинает нормально, но потом очень долго водит картриджем, и постепенно выводит лист наружу. Лист оказывается полностью пустым.
Через libreOffice в окне печати установил параметр InkSet в Color, и всё отлично напечаталось  Просто он печатает чёрным картриджем, когда надо цветным. В чёрном картридже у меня чернил нету. Как заставить его печатать цветным картриджем через терминал?

2

Не приходилось печатать таким образом, но не поможет ли тут -o ColorModel=color?

Истинный hotplug - это обычная электрическая розетка: воткнул - работает, и никаких драйверов.
Slackware64-current/Xfce/Lenovo G580

3

yars пишет:

-o ColorModel=color?

Не работает, опять чёрным печатает.
Вот я нашёл как вывести список всех опций

+ открыть спойлер

 Консоль:
PageSize/Media Size: *Letter Legal Executive Postcard CD5Inch CD3Inch CDCustom w216h360 w252h360 w252h360J w144h432 w288h432 w288h432J w324h495 w297h421 w288h576 w360h504 w360h504J w360h576 w432h432 w432h576 w432h612 w432h648 c8x10 c8x10J Statement w576h576 w576h864 w612h864 A4 A5 A6 A7 A8 A9 A10 w609h864 ISOB5 ISOB6 ISOB7 ISOB8 ISOB9 ISOB10 B5 B6 B7 B8 B9 B10 C5 w354h918 C6 C6_l DL w229h459 w229h459_l C7 C7_l C8 C8_l C9 C9_l C10 C10_l EA5 w612h936 w535h697 w569h731 w348h527 w365h561 w391h612 w442h663 w314h504 w314h513 cw365h561 w283h425 w283h420 w420h567 w340h666 w255h581 w255h581_l w297h666 w277h538 w277h538_l COM10 w315h414 Monarch Monarch_l w288h387 w288h504 w288h512 w253h337 w155h244 w155h257 w283h566 w612h935 Custom.WIDTHxHEIGHT
ColorModel/Color Model: Gray Black *RGB CMY CMYK KCMY
StpColorPrecision/Color Precision: *Normal Best
MediaType/Media Type: *Plain PhotoPlusGloss2 PhotoProPlat PhotoProLuster PhotoProSemiGloss GlossyPaper PhotopaperMatte Coated HagakiA InkJetHagaki CanonPhotoHagakiK Hagaki TShirt Envelope PhotopaperOther
InputSlot/Media Source: *Front
StpQuality/Print Quality: None *Standard
Resolution/Resolution: *601x600dpi 600dpi 602x600dpi 603x600dpi 300dpi 604x600dpi 605x600dpi 606x600dpi 607x600dpi 608x600dpi 609x600dpi
Duplex/2-Sided Printing: *None DuplexNoTumble DuplexTumble
StpiShrinkOutput/Shrink Page If Necessary to Fit Borders: *Shrink Crop Expand
StpInkType/Ink Type: *CMYK RGB Gray
StpInkSet/Ink Set: *Both Black Color
StpFullBleed/Borderless: *False True
StpColorCorrection/Color Correction: *None Accurate Bright Hue Uncorrected Desaturated Threshold Density Raw Predithered
StpBrightness/Brightness: 0 100 200 300 400 500 600 700 800 900 *None 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Custom.REAL
StpFineBrightness/Brightness Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpContrast/Contrast: 0 100 200 300 400 500 600 700 800 900 *None 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 Custom.REAL
StpFineContrast/Contrast Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpSaturation/Saturation: 0 100 200 300 400 500 600 700 800 900 *None 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 4300 4400 4500 4600 4700 4800 4900 5000 5100 5200 5300 5400 5500 5600 5700 5800 5900 6000 6100 6200 6300 6400 6500 6600 6700 6800 6900 7000 7100 7200 7300 7400 7500 7600 7700 7800 7900 8000 8100 8200 8300 8400 8500 8600 8700 8800 8900 9000 Custom.REAL
StpFineSaturation/Saturation Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpImageType/Image Type: None Text Graphics *TextGraphics Photo LineArt
StpCyanDensity/Cyan Density: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 *None Custom.REAL
StpFineCyanDensity/Cyan Density Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpMagentaDensity/Magenta Density: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 *None Custom.REAL
StpFineMagentaDensity/Magenta Density Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpYellowDensity/Yellow Density: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 *None Custom.REAL
StpFineYellowDensity/Yellow Density Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpBlackDensity/Black Density: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 *None Custom.REAL
StpFineBlackDensity/Black Density Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpDensity/Density: 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 4300 4400 4500 4600 4700 4800 4900 5000 5100 5200 5300 5400 5500 5600 5700 5800 5900 6000 6100 6200 6300 6400 6500 6600 6700 6800 6900 7000 7100 7200 7300 7400 7500 7600 7700 7800 7900 8000 *None Custom.REAL
StpFineDensity/Density Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpDitherAlgorithm/Dither Algorithm: *None EvenTone HybridEvenTone Adaptive Ordered OrderedNew Fast VeryFast Floyd Predithered Segmented SegmentedNew
StpGamma/Composite Gamma: 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 *None Custom.REAL
StpFineGamma/Composite Gamma Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpCyanGamma/Cyan: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 *None Custom.REAL
StpFineCyanGamma/Cyan Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpMagentaGamma/Magenta: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 *None Custom.REAL
StpFineMagentaGamma/Magenta Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpYellowGamma/Yellow: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 *None Custom.REAL
StpFineYellowGamma/Yellow Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpBlackGamma/Black: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 *None Custom.REAL
StpFineBlackGamma/Black Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpCyanBalance/Cyan Balance: 0 100 200 300 400 500 600 700 800 900 1000 *None Custom.REAL
StpFineCyanBalance/Cyan Balance Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpMagentaBalance/Magenta Balance: 0 100 200 300 400 500 600 700 800 900 1000 *None Custom.REAL
StpFineMagentaBalance/Magenta Balance Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpYellowBalance/Yellow Balance: 0 100 200 300 400 500 600 700 800 900 1000 *None Custom.REAL
StpFineYellowBalance/Yellow Balance Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpLinearContrast/Linear Contrast Adjustment: *False True
StpLightCyanTrans/Light Cyan Transition: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 4300 4400 4500 4600 4700 4800 4900 5000 *None Custom.REAL
StpFineLightCyanTrans/Light Cyan Transition Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpLightMagentaTrans/Light Magenta Transition: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 4300 4400 4500 4600 4700 4800 4900 5000 *None Custom.REAL
StpFineLightMagentaTrans/Light Magenta Transition Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpLightYellowTrans/Light Yellow Transition: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 4300 4400 4500 4600 4700 4800 4900 5000 *None Custom.REAL
StpFineLightYellowTrans/Light Yellow Transition Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpInkLimit/Ink Limit: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 *None Custom.REAL
StpFineInkLimit/Ink Limit Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpBlackTrans/GCR Transition: 0 100 200 300 400 500 600 700 800 900 1000 *None Custom.REAL
StpFineBlackTrans/GCR Transition Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpGCRLower/GCR Lower Bound: 0 100 200 300 400 500 600 700 800 900 1000 *None Custom.REAL
StpFineGCRLower/GCR Lower Bound Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
StpGCRUpper/GCR Upper Bound: 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 4300 4400 4500 4600 4700 4800 4900 5000 *None Custom.REAL
StpFineGCRUpper/GCR Upper Bound Fine Adjustment: *None 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95

А вот что выводит команда lpoptions

 Консоль:
copies=1 device-uri=usb://Canon/MG3500%20series?serial=440642&interface=1 finishings=3 job-hold-until=no-hold job-priority=50 job-sheets=none,none marker-change-time=0 number-up=1 printer-commands=none printer-info='Canon MG3500 series' printer-is-accepting-jobs=true printer-is-shared=true printer-location=mx printer-make-and-model='Canon MG3500 series - CUPS+Gutenprint v5.2.10' printer-state=3 printer-state-change-time=1488557751 printer-state-reasons=none printer-type=167964 printer-uri-supported=ipp://localhost:631/printers/MG3500-series

Вот нужная мне строчка
 Консоль:
StpInkSet/Ink Set: *Both Black Color

Сейчас попробую этот параметр использовать.
*** Добавлено: 03.03.2017 19:35:57 ***

Получилось наконец-то напечатать командой

 Консоль:
lpr -T "print1" -# 1 -o StpInkSet=Color print.txt

Только вот текст слишком сильно влево уходит, табуляция в начале каждой строки помогает.

*** Добавлено: 03.03.2017 19:43:07 ***

А вот так можно этот параметр по умолчанию сделать

 Консоль:
lpoptions -o StpInkSet=Color