ну ненаю блин чё делать
можно конечно из бинарников собрать
всмысле установить бинарники но они криво работаютс усб переходником(((
а с разработчиком связаться без знания английского сложновато будит
на всякий случай выкину файл Сonfig.mk мож кто подправит мои ошибки
#===============================================================
# V Make Configuration file - Version 1.24 - 3/3/2000
#
# Copyright (C) 1995-2000 Bruce E. Wampler
# date:
#
# THIS IS THE Config.mk FILE FOR THE X Athena VERSION OF V
#
# To build an X version, set the TOOLKIT variable to Athena
# for the generic Athena version, or to Motif
# for the Lesstif/Motif version. (See comment below)
#
# This file is part of the V C++ GUI Framework, and is covered
# under the terms of the GNU Lesser General Public License,
# Version 2.1. This library has NO WARRANTY. See the source file
# vapp.cxx for more complete information about license terms.
#===============================================================
#---------------------------------------------------------------------
# Version info
#---------------------------------------------------------------------
VV = 1.25
VVW = 125
#---------------------------------------------------------------------
# HOMEV info
#---------------------------------------------------------------------
#HOMEV = $(HOME)/v
#HOMEV = ..
HOMEV = $(HOME)/PonyProg2000-2.07c/v
LINUX_HEADERS = /usr/src/kernels/2.6.38.6-27.fc15.i686/include/
INSTALL_PREFIX = /usr/local
#---------------------------------------------------------------------
# Tools used in the makefile execution
#---------------------------------------------------------------------
#CC = gcc
#CXX = g++
CC = gcc
CXX = g++
#---------------------------------------------------------------------
# VPATH for dependencies on header files
#---------------------------------------------------------------------
VPATH=$(HOMEV)/PonyProg2000-2.07c/v
#---------------------------------------------------------------------
# Select the architecture of your system.
# These are the architectures that V has been extensively tested with:
# linux, linuelf, sun4, mips, sgi
#
# User contributed definitions are available for:
# hpux, aix, solaris, bsd
#---------------------------------------------------------------------
ARCH = linux
#ARCH = linuxelf
#ARCH = sun4
#ARCH = mips
#ARCH = sgi
#ARCH = hpux
#ARCH = aix
#ARCH = solaris
#ARCH = bsd
Arch = $(ARCH)
#---------------------------------------------------------------------
# Select Athena or Motif TOOLKIT option.
#---------------------------------------------------------------------
TOOLKIT = Athena
#TOOLKIT = Motif
#---------------------------------------------------------------------
# Use this define for NO 3D on Athena Widgets
# For Motif use NO 3D i.e. USE_3D=no.
#---------------------------------------------------------------------
ifeq ($(TOOLKIT),Motif)
USE_3D = no
else
USE_3D = yes
endif
#---------------------------------------------------------------------
# Select X11R-version
#---------------------------------------------------------------------
#X11RV = X11R5
X11RV = X11R6
# where X11 files are
Xdir11 = X11R6
#Xdir11 = X11
#---------------------------------------------------------------------
# Select Debug or no Debug
#---------------------------------------------------------------------
#DEBUG = yes
DEBUG = no
#---------------------------------------------------------------------
# Select Develop or not - used for original development
#---------------------------------------------------------------------
#DEVEL = yes
DEVEL = no
#---------------------------------------------------------------------
# Define filename extensions that are targeted by cleanup's
#---------------------------------------------------------------------
CLEANEXTS= *.bak *~ *.tmp core *.o *.obj
#---------------------------------------------------------------------
# Architecture dependent directory locations
#---------------------------------------------------------------------
VLibDir = $(HOMEV)/lib
ifeq ($(TOOLKIT),Motif)
oDir = $(HOMEV)/obj
endif
ifeq ($(TOOLKIT),Athena)
oDir = $(HOMEV)/objx
endif
LibDir = $(HOMEV)/lib
Bin = $(HOMEV)/bin
#---------------------------------------------------------------------
# Architecture independent
#---------------------------------------------------------------------
INCDIR = -I$(HOMEV)/includex
LIBDIR = -L$(LibDir)
ifeq ($(TOOLKIT),Athena)
LIBNAME = libVx
V1NAME = v1x
LIBS = -lVx -lXaw
endif
ifeq ($(TOOLKIT),Motif)
LIBNAME = libV
V1NAME = v1
LIBS = -lV -lXm -lXp
endif
#---------------------------------------------------------------------
# Linux
#---------------------------------------------------------------------
ifeq ($(Arch),linux)
INCDIR += -I/usr/$(X11RV)/include
LIBDIR += -L/usr/$(X11RV)/lib
LIBS += -lXmu -lXt -lXext -lX11
TARZ = z
RANLIB = ranlib
VGPATH = LINUX
endif
#---------------------------------------------------------------------
# Linux ELF shared library
#---------------------------------------------------------------------
ifeq ($(Arch),linuxelf)
INCDIR += -I/usr/$(X11RV)/include
LIBDIR += -L/usr/$(X11RV)/lib
LIBS += -lXmu -lXt -lXext -lX11
TARZ = z
RANLIB = ranlib
VGPATH = LINUX
endif
#---------------------------------------------------------------------
# Sun4 - unm
#---------------------------------------------------------------------
ifeq ($(TOOLKIT),Athena)
ifeq ($(Arch),sun4)
INCDIR += -I/usr/local/X11/include
LIBDIR += -L/usr/local/X11/lib
LIBS += -lXaw -lXmu -lXt -lXext -lX11
TARZ =
RANLIB = ranlib
VGPATH = UNIX
endif
endif
#----------------------------------------------------------------------
# solaris - shared Motif/CDE libraries
#----------------------------------------------------------------------
ifeq ($(TOOLKIT),Motif)
ifeq ($(Arch),solaris)
INCDIR += -I/usr/openwin/include -I/usr/dt/share/include -I$(HOMEV)/includex
LIBDIR += -R/usr/dt/lib:/usr/openwin/lib -L/usr/dt/lib
LIBS += -lXmu -lXt -lXext -lX11 -lnsl -lsocket
TARZ =
RANLIB = true
VGPATH = UNIX
endif
endif
#---------------------------------------------------------------------
# mips - unm
#---------------------------------------------------------------------
ifeq ($(Arch),mips)
INCDIR += -I/usr/local/X11/include
LIBDIR += -L/usr/local/X11/lib
LIBS += -lXaw -lXmu -lXt -lXext -lX11
TARZ =
RANLIB = ranlib
VGPATH = UNIX
endif
#---------------------------------------------------------------------
# sgi
# - the native compiler on IRIX 5.3 complains ad nauseam
# about parameters that are declared but not referenced
# in virtual functions; the -woff turns that warning off
#---------------------------------------------------------------------
ifeq ($(Arch),sgi)
INCDIR += -I/usr/include
LIBDIR += -L/usr/lib
LIBS += -lXmu -lXt -lXext -lX11 -lm
TARZ =
RANLIB = true
VGPATH = UNIX
ifneq ($(CXX),g++)
CFLAGS += -woff 3262
endif
endif
#---------------------------------------------------------------------
# hpux:
# - /usr/include is included explicitly because on HP-UX 10.20
# mixing of GNU supplied and system supplied includes leads to
# problems
# - X11 is available either in /usr/contrib or /usr/local
# listing both can not hurt
#----------------------------------------------------------------------
ifeq ($(Arch),hpux)
INCDIR += -I/usr/include -I/usr/include/$(X11RV) \
-I/usr/contrib/$(X11RV)/include \
-I/usr/local/$(X11RV)/include
LIBDIR += -L/usr/lib/$(X11RV) -L/usr/contrib/$(X11RV)/lib \
-L/usr/local/$(X11RV)/lib
LIBS += -lXmu -lXt -lSM -lICE -lXext -lX11
TARZ =
RANLIB = true
VGPATH = UNIX
endif
#----------------------------------------------------------------------
# solaris - unm
#----------------------------------------------------------------------
# Note: For Solaris CC Workshop comiplers and OpenWindows linking:
#LIBDIR += -L/usr/openwin/lib -R/usr/openwin/lib
ifeq ($(Arch),solaris)
INCDIR += -I/usr/local/X11/include -I$(HOMEV)/includex
LIBDIR += -L/usr/local/X11/lib
LIBS += -lXmu -lXt -lXext -lX11 -lnsl -lsocket
TARZ =
RANLIB = true
VGPATH = UNIX
endif
#----------------------------------------------------------------------
# FreeBSD with gcc
#----------------------------------------------------------------------
ifeq ($(Arch),bsd)
INCDIR += -I/usr/$(X11RV)/include
LIBDIR += -L/usr/$(X11RV)/lib
LIBS += -lV -lXmu -lXt -lXext -lX11 -lxm
TARZ =
RANLIB = ranlib
VGPATH = UNIX
endif
#---------------------------------------------------------------------
# C/C++ compile options
#---------------------------------------------------------------------
#CFLAGS += -v $(INCDIR)
CFLAGS += $(INCDIR)
ifeq ($(DEBUG),no)
CFLAGS += -O2
endif
ifeq ($(DEBUG),yes)
CFLAGS += -g
endif
ifeq ($(TOOLKIT),Athena)
CFLAGS += -DAthena
endif
ifeq ($(DEVEL),yes)
CFLAGS += -DDEVEL
endif
#---------------------------------------------------------------------
# LINK/LOAD options
#---------------------------------------------------------------------
LDFLAGS = $(LIBDIR) $(LIBS)
