1 Тема от riso (28.12.2011 15:27:53 отредактировано riso)

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

Всем хаюшки и с наступающим!  Проблема такова. Поствил генту, собрал иксы, делаю startx а оно мне выдает:

(EE) No devices detected. 
Fatal server error:
 no screens found

Полный Xorg.log

+ открыть спойлер
[   662.929] 
X.Org X Server 1.11.2
Release Date: 2011-11-04
[   662.936] X Protocol Version 11, Revision 0
[   662.938] Build Operating System: Linux 3.0.6-gentoo x86_64 Gentoo
[   662.939] Current Operating System: Linux localhost 3.0.6-gentoo #1 SMP Wed Dec 28 15:15:08 FET 2011 x86_64
[   662.942] Kernel command line: root=/dev/ram0 real_root=/dev/sda2 udev vga=0x318
[   662.944] Build Date: 27 December 2011  08:26:04PM
[   662.946]  
[   662.948] Current version of pixman: 0.24.0
[   662.950]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   662.954] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   662.959] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 28 15:35:12 2011
[   662.961] (++) Using config file: "xorg.conf.new"
[   662.963] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   662.965] (==) ServerLayout "X.org Configured"
[   662.965] (**) |-->Screen "Screen0" (0)
[   662.965] (**) |   |-->Monitor "Monitor0"
[   662.966] (**) |   |-->Device "Card0"
[   662.966] (**) |-->Input Device "Mouse0"
[   662.966] (**) |-->Input Device "Keyboard0"
[   662.966] (==) Automatically adding devices
[   662.966] (==) Automatically enabling devices
[   662.966] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[   662.966] (**) ModulePath set to "/usr/lib64/xorg/modules"
[   662.966] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   662.966] (WW) Disabling Mouse0
[   662.966] (WW) Disabling Keyboard0
[   662.966] (II) Loader magic: 0x7ceac0
[   662.966] (II) Module ABI versions:
[   662.966]     X.Org ANSI C Emulation: 0.4
[   662.966]     X.Org Video Driver: 11.0
[   662.966]     X.Org XInput driver : 13.0
[   662.966]     X.Org Server Extension : 6.0
[   662.967] (--) PCI:*(0:0:2:0) 8086:0042:1849:0042 rev 24, Mem @ 0xfb800000/4194304, 0xd0000000/268435456, I/O @ 0x0000cc00/8
[   662.967] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   662.967] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[   662.967] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[   662.967] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   662.967] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[   662.967] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[   662.967] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[   662.967] (II) LoadModule: "dri"
[   662.967] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[   662.968] (II) Module dri: vendor="X.Org Foundation"
[   662.968]     compiled for 1.11.2, module version = 1.0.0
[   662.968]     ABI class: X.Org Server Extension, version 6.0
[   662.968] (II) Loading extension XFree86-DRI
[   662.968] (II) LoadModule: "glx"
[   662.968] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   662.968] (II) Module glx: vendor="X.Org Foundation"
[   662.968]     compiled for 1.11.2, module version = 1.0.0
[   662.968]     ABI class: X.Org Server Extension, version 6.0
[   662.968] (==) AIGLX enabled
[   662.968] (II) Loading extension GLX
[   662.968] (II) LoadModule: "dri2"
[   662.968] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[   662.968] (II) Module dri2: vendor="X.Org Foundation"
[   662.968]     compiled for 1.11.2, module version = 1.2.0
[   662.968]     ABI class: X.Org Server Extension, version 6.0
[   662.968] (II) Loading extension DRI2
[   662.968] (II) LoadModule: "extmod"
[   662.969] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[   662.969] (II) Module extmod: vendor="X.Org Foundation"
[   662.969]     compiled for 1.11.2, module version = 1.0.0
[   662.969]     Module class: X.Org Server Extension
[   662.969]     ABI class: X.Org Server Extension, version 6.0
[   662.969] (II) Loading extension MIT-SCREEN-SAVER
[   662.969] (II) Loading extension XFree86-VidModeExtension
[   662.969] (II) Loading extension XFree86-DGA
[   662.969] (II) Loading extension DPMS
[   662.969] (II) Loading extension XVideo
[   662.969] (II) Loading extension XVideo-MotionCompensation
[   662.969] (II) Loading extension X-Resource
[   662.969] (II) LoadModule: "dbe"
[   662.969] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[   662.969] (II) Module dbe: vendor="X.Org Foundation"
[   662.969]     compiled for 1.11.2, module version = 1.0.0
[   662.969]     Module class: X.Org Server Extension
[   662.969]     ABI class: X.Org Server Extension, version 6.0
[   662.969] (II) Loading extension DOUBLE-BUFFER
[   662.969] (II) LoadModule: "record"
[   662.969] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[   662.969] (II) Module record: vendor="X.Org Foundation"
[   662.969]     compiled for 1.11.2, module version = 1.13.0
[   662.970]     Module class: X.Org Server Extension
[   662.970]     ABI class: X.Org Server Extension, version 6.0
[   662.970] (II) Loading extension RECORD
[   662.970] (II) LoadModule: "intel"
[   662.970] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[   662.970] (II) Module intel: vendor="X.Org Foundation"
[   662.970]     compiled for 1.11.2, module version = 2.17.0
[   662.970]     Module class: X.Org Video Driver
[   662.970]     ABI class: X.Org Video Driver, version 11.0
[   662.970] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[   662.971] (--) using VT number 7

[   662.976] (EE) No devices detected.
[   662.976] 
Fatal server error:
[   662.976] no screens found
[   662.976] 
Please consult the The X.Org Foundation support 
     at http://wiki.x.orgagpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
 for help. 
[   662.976] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   662.976]

Должен отметить, что intel драйвер собран у меня в ядре статически.
dmesg |egrep -i 'intel|i925'

+ открыть спойлер
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 262144K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64

lspci |grep -i intel

+ открыть спойлер
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

модуля которые подгружаются при старте, grep intel ( по ходу все касаются звука)

+ открыть спойлер
snd_hda_intel          17208  0 
snd_hda_codec          46656  3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_pcm                47056  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd                    39376  7 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc          5240  2 snd_hda_intel,snd_pcm

eix xorg-server

+ открыть спойлер
[i] x11-base/xorg-server
     Available versions:  1.9.5-r1 1.10.4-r1 ~1.11.2-r1 1.11.2-r2 ~1.11.3 [M]~1.11.99.2 {dmx doc ipv6 kdrive minimal nptl static-libs tslib +udev xnest xorg xvfb}
     Installed versions:  1.11.2-r2(20:43:50 12/27/11)(nptl udev xorg -dmx -doc -ipv6 -kdrive -minimal -static-libs -tslib -xnest -xvfb)
     Homepage:            http://xorg.freedesktop.org/
     Description:         X.Org X servers

make.conf|egrep 'USE|VIDEO|CHOST'

+ открыть спойлер
USE="-ipv6 -gtk -gnome -kde -qt truetype type1 jpeg mp3 png gif cairo svg X alsa cdr unicode dvd udev"
VIDEO_CARDS="intel"
CHOST="x86_64-pc-linux-gnu"

emerge --info

+ открыть спойлер
Portage 2.1.10.41 (default/linux/amd64/10.0, gcc-4.5.3, glibc-2.13-r4, 3.0.6-gentoo x86_64)
=================================================================
System uname: Linux-3.0.6-gentoo-x86_64-Intel-R-_Core-TM-_i3_CPU_540_@_3.07GHz-with-gentoo-2.0.3
Timestamp of tree: Tue, 27 Dec 2011 12:30:01 +0000
app-shells/bash:          4.1_p9
dev-lang/python:          2.7.2-r3, 3.1.4-r3
dev-util/pkgconfig:       0.26
sys-apps/baselayout:      2.0.3
sys-apps/openrc:          0.9.4
sys-apps/sandbox:         2.5
sys-devel/autoconf:       2.68
sys-devel/automake:       1.11.1
sys-devel/binutils:       2.21.1-r1
sys-devel/gcc:            4.5.3-r1
sys-devel/gcc-config:     1.4.1-r1
sys-devel/libtool:        2.4-r1
sys-devel/make:           3.82-r1
sys-kernel/linux-headers: 2.6.39 (virtual/os-headers)
sys-libs/glibc:           2.13-r4
Repositories: gentoo
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs distlocks ebuild-locks fixlafiles news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS=""
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LINGUAS="ru,en"
MAKEOPTS="-j6"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X acl alsa amd64 berkdb bzip2 cairo cdr cli cracklib crypt cups cxx dri dvd fortran gdbm gif gpm iconv jpeg mmx modules mp3 mudflap multilib ncurses nls nptl nptlonly openmp pam pcre png pppd readline session sse sse2 ssl svg sysfs tcpd truetype type1 udev unicode xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="ru,en" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="intel" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

Вроде бы всю инфу предоставил. В гугл ходил, в основном проблема рашается пересборкой ядра и включением поддержки intel драйверов.

— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

2 Ответ от Fat-Zer

  • Fat-Zer
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 14.10.2010
  • Сообщений: 4,977
  • Репутация : [ 256 | 6 ]

CONFIG_AGP_INTEL и (CONFIG_DRM_I915 или CONFIG_DRM_I830) включены?

95% процентов проблем находятся между клавиатурой и стулом.

3 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

Загрузиться с LiveUSB, например, SystemRescueCD и показать

lspci -k
lsmod

Проверить, чтобы в ядре были следующие опции

lupo@gentoo-laptop ~ % zegrep 'AGP|DRM' /proc/config.gz | grep -v '^#|^$'
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
Был, был и весь вышел...

4 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

lspci -k с gentoo minimal install

+ открыть спойлер
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
    Subsystem: ASRock Incorporation Device 0040
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
    Subsystem: ASRock Incorporation Device 0042
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b3c
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    Subsystem: ASRock Incorporation Device 2718
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
    Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
    Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
    Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b34
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b06
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b20
    Kernel driver in use: ata_piix
    Kernel modules: ata_generic, pata_acpi, ata_piix
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b30
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b26
    Kernel driver in use: ata_piix
    Kernel modules: ata_generic, pata_acpi, ata_piix
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    Subsystem: ASRock Incorporation Motherboard (one of many)
    Kernel driver in use: r8169
    Kernel modules: r8169
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
    Subsystem: ASRock Incorporation Device 2c61
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
    Subsystem: ASRock Incorporation Device 2c61
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
    Subsystem: ASRock Incorporation Device 2c61
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
    Subsystem: ASRock Incorporation Device 2c61
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
    Subsystem: ASRock Incorporation Device 2c61
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
    Subsystem: ASRock Incorporation Device 2c61

zegrep 'AGP|DRM' /proc/config.gz | grep -v '^#|^$'

CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_DRM_I810=y
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set

единственное что не включено CONFIG_DRM_I915_KMS , это имеете значение ?

— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

5 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]
riso пишет:

единственное что не включено CONFIG_DRM_I915_KMS , это имеете значение ?

Эта опция служит для автоматического выбора «правильного» разрешения консоли.
Я бы, на всякий случай, убрал бы «лишние» опции

CONFIG_AGP_AMD64=y
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=y
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y

...или всё это модулями.

Был, был и весь вышел...

6 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

Lupo Alberto, спасибо, завтра зделаю. Но как я понял дело не в лишних опциях. Есть еще идеи ?

— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

7 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]
riso пишет:

Есть еще идеи ?

riso пишет:

lspci -k с gentoo minimal install

Эта команда запускалась в графическом режиме?
Хотелось бы увидеть её вывод при запущенном xorg-server'е.
P.S. ...и полный вывод команды dmesg с вашим ядром.
P.S.S. ...и lscpci -n.

Был, был и весь вышел...

8 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

Эта команда запускалась в графическом режиме?

нет.

Хотелось бы увидеть её вывод при запущенном xorg-server'е.

Вывод с arch linux подойдет ?

и полный вывод команды dmesg с вашим ядром.

тоже сделаю

— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

9 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]
riso пишет:

Вывод с arch linux подойдет ?

Да.

Lupo Alberto пишет:

P.S.S. ...и lscpci -n.

Был, был и весь вышел...

10 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

dmesg 

000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 24 pages/cpu @ffff88006b400000 s69312 r8192 d20800 u262144
pcpu-alloc: s69312 r8192 d20800 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 434039
Kernel command line: root=/dev/ram0 real_root=/dev/sda2 udev vga=0x318
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1717140k/1760704k available (5441k kernel code, 452k absent, 43112k reserved, 2100k data, 480k init)
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3078.988 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6157.97 BogoMIPS (lpj=30789880)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110413
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz stepping 05
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 9a000
 #2
smpboot cpu 2: start_ip = 9a000
 #3
smpboot cpu 3: start_ip = 9a000
Brought up 4 CPUs
Total of 4 processors activated (24630.87 BogoMIPS).
PM: Registering ACPI NVS region at 6b780000 (327680 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000006b7820f0 01340 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 01340 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 000000006b783430 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x6c000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:0040] type 0 class 0x000600
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:02.0: [8086:0042] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xfb800000-0xfbbfffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xcc00-0xcc07]
pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xfbef6000-0xfbef63ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfbef8000-0xfbefbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xfbefc000-0xfbefc3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
pci 0000:00:1f.2: [8086:3b20] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io  0xff90-0xff9f]
pci 0000:00:1f.2: reg 24: [io  0xffa0-0xffaf]
pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfbeffc00-0xfbeffcff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:00:1f.5: [8086:3b26] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io  0xdc00-0xdc07]
pci 0000:00:1f.5: reg 14: [io  0xd880-0xd883]
pci 0000:00:1f.5: reg 18: [io  0xd800-0xd807]
pci 0000:00:1f.5: reg 1c: [io  0xd480-0xd483]
pci 0000:00:1f.5: reg 20: [io  0xd400-0xd40f]
pci 0000:00:1f.5: reg 24: [io  0xd080-0xd08f]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:01:00.0: reg 10: [io  0xe800-0xe8ff]
pci 0000:01:00.0: reg 18: [mem 0xfadff000-0xfadfffff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xfadf8000-0xfadfbfff 64bit pref]
pci 0000:01:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 01-01]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.5:   bridge window [mem 0xfad00000-0xfadfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x6c000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
pci 0000:ff:00.0: [8086:2c61] type 0 class 0x000600
pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 000000006b770000 - 000000006bffffff 
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x6c000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfed14000-0xfed19fff]
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x0378-0x037f]
pnp 00:06: [io  0x0778-0x077f]
pnp 00:06: [irq 7]
pnp 00:06: [dma 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: [io  0x0010-0x001f]
pnp 00:07: [io  0x0022-0x003f]
pnp 00:07: [io  0x0044-0x004d]
pnp 00:07: [io  0x0050-0x005f]
pnp 00:07: [io  0x0062-0x0063]
pnp 00:07: [io  0x0065-0x006f]
pnp 00:07: [io  0x0072-0x007f]
pnp 00:07: [io  0x0080]
pnp 00:07: [io  0x0084-0x0086]
pnp 00:07: [io  0x0088]
pnp 00:07: [io  0x008c-0x008e]
pnp 00:07: [io  0x0090-0x009f]
pnp 00:07: [io  0x00a2-0x00bf]
pnp 00:07: [io  0x00e0-0x00ef]
pnp 00:07: [io  0x04d0-0x04d1]
pnp 00:07: [io  0x0800-0x087f]
pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io  0x0500-0x057f]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed40000-0xfed8ffff]
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x0800-0x087f] has been reserved
system 00:07: [io  0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io  0x0060]
pnp 00:0a: [io  0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [io  0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io  0x0290-0x029f]
system 00:0c: [io  0x0290-0x029f] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0x6bffffff]
pnp 00:0e: [mem 0xfed90000-0xffffffff]
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0x6bffffff] could not be reserved
system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.4: BAR 8: assigned [mem 0x80000000-0x803fffff]
pci 0000:00:1c.4: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0:   bridge window [io  disabled]
pci 0000:00:1c.0:   bridge window [mem disabled]
pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.4:   bridge window [mem 0x80000000-0x803fffff]
pci 0000:00:1c.4:   bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 01-01]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.5:   bridge window [mem 0xfad00000-0xfadfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: enabling device (0106 -> 0107)
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x6c000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:03: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x80000000-0x803fffff]
pci_bus 0000:02: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xfad00000-0xfadfffff 64bit pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0x6c000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
Freeing initrd memory: 3688k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1325151057.749:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
GFS2 installed
msgmni has been set to 3360
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 262144K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
vesafb: mode is 1024x768x32, linelength=4096, pages=84
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010480000, using 6144k, total 262080k
Refined TSC clocksource calibration: 3078.754 MHz.
Switching to clocksource tsc
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
drm/i810 does not support SMP
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.0: irq 40 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 480k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100
ata2.00: ATA-7: ExcelStor Technology J8160S, P22OABEA, max UDMA/133
ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATA-8: ST3500413AS, JC45, max UDMA/133
ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: configured for UDMA/100
scsi 0:0:1:0: CD-ROM            Optiarc  DVD RW AD-5260S  1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      ExcelStor Techno P22O PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:1:0: Direct-Access     ATA      ST3500413AS      JC45 PQ: 0 ANSI: 5
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 1:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:1:0: [sdb] Attached SCSI disk
sr 0:0:1:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:1:0: Attached scsi generic sg2 type 0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
imm: Version 2.05 (for Linux 2.4.0)
Fusion MPT base driver 3.04.19
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.19
Fusion MPT FC Host driver 3.04.19
Fusion MPT SAS Host driver 3.04.19
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.1-7[28000]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011
QLogic Fibre Channel HBA Driver: 8.03.07.03-k
Emulex LightPulse Fibre Channel SCSI driver 8.3.23
Copyright(c) 2004-2009 Emulex.  All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbef6000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.0.6-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbefc000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.0.6-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
usb 2-1.5: new low speed USB device number 3 using ehci_hcd
usb 2-1.5: New USB device found, idVendor=093a, idProduct=2510
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: USB OPTICAL MOUSE
usb 2-1.5: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input3
generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.5/input0
raid6: int64x1   3099 MB/s
raid6: int64x2   3282 MB/s
raid6: int64x4   2608 MB/s
raid6: int64x8   1985 MB/s
raid6: sse2x1    7506 MB/s
raid6: sse2x2    8809 MB/s
raid6: sse2x4   10010 MB/s
raid6: using algorithm sse2x4 (10010 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
   generic_sse: 11665.600 MB/sec
xor: using function: generic_sse (11665.600 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.16)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
Loading iSCSI transport class v2.0-870.
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
udev[15855]: starting version 164
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
input: PC Speaker as /devices/platform/pcspkr/input/input4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: irq 41 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc90010f7e000, 00:25:22:71:e3:ed, XID 081000c0 IRQ 41
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ppdev: user-space parallel port driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
HDMI status: Pin=4 Presence_Detect=0 ELD_Valid=0
HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Adding 1060284k swap on /dev/sda3.  Priority:-1 extents:1 across:1060284k 
r8169 0000:01:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
r8169 0000:01:00.0: eth0: link down
r8169 0000:01:00.0: eth0: link up
NET: Registered protocol family 10
eth0: no IPv6 routers present
EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)

lspci -k 

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
    Subsystem: ASRock Incorporation Device 0040
    Kernel driver in use: agpgart-intel
    Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
    Subsystem: ASRock Incorporation Device 0042
    Kernel driver in use: i915
    Kernel modules: i915
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b3c
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    Subsystem: ASRock Incorporation Device 2718
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b34
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b06
    Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b20
    Kernel driver in use: ata_piix
    Kernel modules: ata_piix
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b30
    Kernel driver in use: i801_smbus
    Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
    Subsystem: ASRock Incorporation Device 3b26
    Kernel driver in use: ata_piix
    Kernel modules: ata_piix
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    Subsystem: ASRock Incorporation Motherboard (one of many)
    Kernel driver in use: r8169
    Kernel modules: r8169

lspci -n

00:00.0 0600: 8086:0040 (rev 18)
00:02.0 0300: 8086:0042 (rev 18)
00:1a.0 0c03: 8086:3b3c (rev 06)
00:1b.0 0403: 8086:3b56 (rev 06)
00:1c.0 0604: 8086:3b42 (rev 06)
00:1c.4 0604: 8086:3b4a (rev 06)
00:1c.5 0604: 8086:3b4c (rev 06)
00:1d.0 0c03: 8086:3b34 (rev 06)
00:1e.0 0604: 8086:244e (rev a6)
00:1f.0 0601: 8086:3b06 (rev 06)
00:1f.2 0101: 8086:3b20 (rev 06)
00:1f.3 0c05: 8086:3b30 (rev 06)
00:1f.5 0101: 8086:3b26 (rev 06)
01:00.0 0200: 10ec:8168 (rev 03)
— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

11 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

Покажите ещё 

zegrep FB_ /proc/config.gz | grep -v '^#'

или

grep FB_ /usr/src/linux/.config | grep -v '^#'

...и всё же уберите «лишние» опции из ядра — http://linuxforum.ru/viewtopic.php?pid=238220#p238220

Был, был и весь вышел...

12 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

zegrep FB_ /proc/config.gz | grep -v '^#'

CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_VESA=y
CONFIG_FB_CON_DECOR=y

Пересобрал ядро, теперь так: zegrep 'AGP|DRM' /proc/config.gz |grep '^#'

CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_I915=y
— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

13 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

Покажите

 qlist -I -C x11-drivers/
Был, был и весь вышел...

14 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

qlist -I -C x11-drivers/

x11-drivers/xf86-input-evdev
x11-drivers/xf86-video-intel
— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

15 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

?

emerge -pv x11-drivers/xf86-video-intel
cat /etc/X11/xorg.conf
Был, был и весь вышел...

16 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

emerge -pv x11-drivers/xf86-video-intel

[ebuild   R    ] x11-drivers/xf86-video-intel-2.17.0-r3  USE="dri -sna" 0 kB

xorg.conf у меня нет. Читал, что в новых иксах не нужен. Кстати почему-то нет директории xorg.conf.d или она создается при первом старте иксов ?
Еще я делал так 

Xorg -configure ; Xorg -config ~/xorg.conf.new

результат тот же.

— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

17 Ответ от Fat-Zer

  • Fat-Zer
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 14.10.2010
  • Сообщений: 4,977
  • Репутация : [ 256 | 6 ]
riso пишет:

xorg.conf.d или она создается при первом старте иксов ?

она создаётся пользователем, когда ему надо что-то сконфигурировать...

попробуйте по старинке: Xorg -configure && X -config /root/xorg.conf.new; sleep 60 && killall X
всё от root'а

95% процентов проблем находятся между клавиатурой и стулом.

18 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

Fat-Zer, пробовал конечно же, результат тот же.

— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

19 Ответ от Fat-Zer

  • Fat-Zer
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 14.10.2010
  • Сообщений: 4,977
  • Репутация : [ 256 | 6 ]

[на всякий пожарный] lspci -k для видео сейчас совпадает с тем, что на арче?
и udev запущен?

95% процентов проблем находятся между клавиатурой и стулом.

20 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

с gentoo

00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
    Subsystem: ASRock Incorporation Device 0042

с  arch'a

00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
    Subsystem: ASRock Incorporation Device 0042
    Kernel driver in use: i915
    Kernel modules: i915

не совпадает. Драйвер не подхватывает что ли.

и rc-status покажите...

Если вы про udev, то он стартует в sysinit

— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

21 Ответ от Fat-Zer

  • Fat-Zer
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 14.10.2010
  • Сообщений: 4,977
  • Репутация : [ 256 | 6 ]

ИМХО остаётся только одно - собрать модулями всё, что с интеловским видео связано...
если видео модуль не подгрузится, то попробовать ручками и посмотреть, что dmesg скажет.

ещё хотелось бы эту строчку в контексте увидеть...

riso пишет:

[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

95% процентов проблем находятся между клавиатурой и стулом.

22 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]
riso пишет:

не совпадает. Драйвер не подхватывает что ли.

В Arch'е он модулем, в Gentoo — встроен в ядро.

Был, был и весь вышел...

23 Ответ от Fat-Zer

  • Fat-Zer
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 14.10.2010
  • Сообщений: 4,977
  • Репутация : [ 256 | 6 ]
Lupo Alberto пишет:

В Arch'е он модулем, в Gentoo — встроен в ядро.

в lspci -k всё равно должен показываться, как драйвер...

95% процентов проблем находятся между клавиатурой и стулом.

24 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]
Fat-Zer пишет:

в lspci -k всё равно должен показываться, как драйвер...

Да, точно...
riso, покажите

zcat /proc/config.gz
Был, был и весь вышел...

25 Ответ от riso

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

zcat /proc/config.gz

http://codepad.org/tX8LrZSt

— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст

26 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

Включите на всякий случай

# CONFIG_DRM_I915_KMS is not set
Был, был и весь вышел...
+ riso

27 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

...и вопрос, напрямую неотносящийся к теме: «А какую файловую систему вы используете?»
Покажите вывод команды

zegrep _FS /proc/config.gz | egrep -v '^#'

...или

egrep _FS /usr/src/linux/.config | egrep -v '^#'

P.S. Не весь конфигурационный файл ac

Был, был и весь вышел...

28 Ответ от riso (30.12.2011 14:01:28 отредактировано riso)

  • riso
  • riso
  • Пользователь
  • Неактивен
  • Откуда: Украина г.Луганск
  • Зарегистрирован: 26.01.2011
  • Сообщений: 758
  • Репутация : [ 23 | 1 ]

Включите на всякий случай

# CONFIG_DRM_I915_KMS is not set

Помогло! Спасибо за ваши труды и подсказки!

какую файловую систему вы используете?

/dev/BOOT ext3
/dev/ROOT ext4
/dev/home ext4
ну и еще монтирую диск с reiserfs.

grep _FS logs/kernel |grep -v '^#'
CONFIG_IDE_PROC_FS=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SENSORS_FSCHMD=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_XFS_FS=y
CONFIG_GFS2_FS=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_FS_POSIX_ACL=y
CONFIG_FSNOTIFY=y
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=y
CONFIG_UDF_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_CONFIGFS_FS=y
CONFIG_ECRYPT_FS=m
CONFIG_NFS_FS=m
CONFIG_TEXTSEARCH_FSM=m
— Ты кто?
— Часть силы той, что без числа
Творит добро, всему желая зла. © Фауст