FATAL: kernel too old
[   10.370000] Kernel panic - not syncing: Attempted to kill init!
[   10.370000] CPU1: stopping

Stage-1 Bootloader XCE_STAGE1: 1.1: Tue Feb  8 01:40:26 PST 2011
Attempting to set PLLA to 700MHz ...
  plla_ctrl0 : 0x0000000A
  plla_ctrl1 : 0x000E0000
  plla_ctrl2 : 0x001C01A0
  plla_ctrl3 : 0x00000016
PLLA Set

Setup memory, testing
Reading NAND, Image 0
  Hdr len: 0x0001C030
  Hdr CRC: 0x39F6D832
 OK


U-Boot 1.1.2 (Jul 29 2010 - 19:36:07)

U-Boot code: 60D00000 -> 60D1C030  BSS: -> 60D21800
RAM Configuration:
    Bank #0: 60000000 128 MB
SRAM Configuration:
    64KB at 0x50000000
NAND:128 MiB
In:    serial
Out:   serial
Err:   serial
Setting Linux mem= boot arg value
Hit any key to stop autoboot:  0 

Loading from device 0: 128MiB 3,3V 8-bit (offset 0x500000)
   -- Using 1bit ECC style encoding
   Image Name:   Linux-2.6.31.6_SMP_820
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2288744 Bytes =  2.2 MB
   Load Address: 60008000
   Entry Point:  60008000
## Booting image at 60500000 ...
   Image Name:   Linux-2.6.31.6_SMP_820
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2288744 Bytes =  2.2 MB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux.......................................................................................................................................... done, booting the kernel.
[    0.000000] Linux version 2.6.31.6_SMP_820 (root@hunchback) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #6 SMP Thu Jun 14 19:49:57 CDT 2012
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: Oxsemi NAS
[    0.000000] 1 memory region
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: root=/dev/sda1 ubi.mtd=2,512 rootfstype=ext3 console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 rootwait mem=128M poweroutage=yes
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 125240KB available (3904K code, 303K data, 140K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:96
[    0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[    0.010000] Console: colour dummy device 80x30
[    0.010000] console [ttyS0] enabled
[    0.020000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
[    0.260000] Security Framework initialized
[    0.260000] Mount-cache hash table entries: 512
[    0.270000] CPU: Testing write buffer coherency: ok
[    0.270000] Calibrating local timer... 349.99MHz.
[    0.340000] CPU1: Booted secondary processor
[    0.440000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
[    0.670000] Brought up 2 CPUs
[    0.680000] SMP: Total of 2 processors activated (558.69 BogoMIPS).
[    0.690000] tmpfs: No value for mount option 'mode'
[    0.690000] devtmpfs: initialized
[    0.700000] NET: Registered protocol family 16
[    0.700000] Number of DMA channels = 4, version = 4
[    0.710000] Reserving a DMA channel for DirectRAID
[    0.710000] Allocating 389 SRAM generic DMA descriptors
[    0.730000] bio: create slab <bio-0> at 0
[    0.740000] SCSI subsystem initialized
[    0.740000] usbcore: registered new interface driver usbfs
[    0.750000] usbcore: registered new interface driver hub
[    0.750000] usbcore: registered new device driver usb
[    0.780000] NET: Registered protocol family 2
[    0.780000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.790000] Switched to NOHz mode on CPU #0
[    0.790000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.790000] Switched to NOHz mode on CPU #1
[    0.800000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.810000] TCP: Hash tables configured (established 4096 bind 4096)
[    0.810000] TCP reno registered
[    0.820000] NET: Registered protocol family 1
[    0.820000] Create fragment cache
[    0.850000] fuse init (API version 7.12)
[    0.850000] msgmni has been set to 244
[    0.860000] alg: No test for stdrng (krng)
[    0.860000] io scheduler noop registered
[    0.860000] io scheduler anticipatory registered
[    0.870000] io scheduler deadline registered
[    0.870000] io scheduler cfq registered (default)
[    0.900000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.910000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
[    0.920000] brd: module loaded
[    0.930000] loop: module loaded
[    0.940000] ox820sata: OX820 sata core.
[    0.940000] scsi0 : oxnassata
[    0.940000] scsi1 : oxnassata
[    0.950000] ata1: SATA max UDMA/133 irq 50
[    0.950000] ata2: SATA max UDMA/133 irq 50
[    0.960000] ox820sata: reseting SATA core
[    1.320000] ata1: SATA link down (SStatus 0 SControl 300)
[    1.320000] ox820sata: reseting SATA core
[    1.680000] ata2: SATA link down (SStatus 0 SControl 300)
[    1.680000] tun: Universal TUN/TAP device driver, 1.6
[    1.690000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.690000] NAND: Page read time 40ms
[    1.700000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[    1.710000] Scanning device for bad blocks
[    1.780000] Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit":
[    1.790000] 0x000000000000-0x000000e00000 : "boot"
[    1.790000] 0x000000e00000-0x000008000000 : "rootfs"
[    1.800000] UBI: attaching mtd2 to ubi0
[    1.800000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    1.810000] UBI: logical eraseblock size:    129024 bytes
[    1.810000] UBI: smallest flash I/O unit:    2048
[    1.820000] UBI: sub-page size:              512
[    1.820000] UBI: VID header offset:          512 (aligned 512)
[    1.830000] UBI: data offset:                2048
[    2.240000] UBI: attached mtd2 to ubi0
[    2.240000] UBI: MTD device name:            "rootfs"
[    2.250000] UBI: MTD device size:            114 MiB
[    2.250000] UBI: number of good PEBs:        912
[    2.260000] UBI: number of bad PEBs:         0
[    2.260000] UBI: max. allowed volumes:       128
[    2.270000] UBI: wear-leveling threshold:    4096
[    2.270000] UBI: number of internal volumes: 1
[    2.280000] UBI: number of user volumes:     1
[    2.280000] UBI: available PEBs:             0
[    2.290000] UBI: total number of reserved PEBs: 912
[    2.290000] UBI: number of PEBs reserved for bad PEB handling: 9
[    2.300000] UBI: max/mean erase counter: 2/0
[    2.300000] UBI: image sequence number: 0
[    2.300000] UBI: background thread "ubi_bgt0d" started, PID 306
[    2.300000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.300000] oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
[    2.300000] oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
[    2.330000] oxnas-ehci oxnas-ehci.0: irq 39, io mem 0x00000000
[    2.350000] oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00
[    2.350000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.360000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.360000] usb usb1: Product: OXNAS EHCI Host Controller
[    2.370000] usb usb1: Manufacturer: Linux 2.6.31.6_SMP_820 ehci_hcd
[    2.380000] usb usb1: SerialNumber: usb
[    2.380000] usb usb1: configuration #1 chosen from 1 choice
[    2.390000] hub 1-0:1.0: USB hub found
[    2.390000] hub 1-0:1.0: 2 ports detected
[    2.400000] Initializing USB Mass Storage driver...
[    2.400000] usbcore: registered new interface driver usb-storage
[    2.410000] USB Mass Storage support registered.
[    2.410000] usbcore: registered new interface driver libusual
[    2.420000] mice: PS/2 mouse device common for all mice
[    2.420000] usbcore: registered new interface driver hiddev
[    2.430000] usbcore: registered new interface driver usbhid
[    2.440000] usbhid: v2.6:USB HID core driver
[    2.440000] TCP cubic registered
[    2.440000] NET: Registered protocol family 10
[    2.450000] lo: Disabled Privacy Extensions
[    2.450000] NET: Registered protocol family 17
[    2.460000] RPC: Registered udp transport module.
[    2.460000] RPC: Registered tcp transport module.
[    2.470000] Waiting for root device /dev/sda1...
[    2.710000] usb 1-1: new high speed USB device using oxnas-ehci and address 2
[    2.860000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.860000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.870000] usb 1-1: Product: USB2.0 Hub
[    2.880000] usb 1-1: configuration #1 chosen from 1 choice
[    2.880000] hub 1-1:1.0: USB hub found
[    2.890000] hub 1-1:1.0: 4 ports detected
[    3.170000] usb 1-1.1: new high speed USB device using oxnas-ehci and address 3
[    3.280000] usb 1-1.1: New USB device found, idVendor=13fe, idProduct=1d00
[    3.280000] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.290000] usb 1-1.1: Product: USB DISK 2.0    
[    3.300000] usb 1-1.1: Manufacturer:         
[    3.300000] usb 1-1.1: SerialNumber: 077A1D061558
[    3.310000] usb 1-1.1: configuration #1 chosen from 1 choice
[    3.310000] scsi2 : SCSI emulation for USB Mass Storage devices
[    8.320000] scsi 2:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
[    9.420000] sd 2:0:0:0: [sda] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[    9.430000] sd 2:0:0:0: [sda] Write Protect is off
[    9.430000] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    9.440000] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    9.440000]  sda: sda1
[    9.450000] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    9.460000] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    9.510000] kjournald starting.  Commit interval 5 seconds
[    9.510000] EXT3 FS on sda1, internal journal
[    9.510000] EXT3-fs: mounted filesystem with writeback data mode.
[    9.510000] VFS: Mounted root (ext3 filesystem) on device 8:1.
[    9.510000] devtmpfs: mounted
[    9.510000] Freeing init memory: 140K
FATAL: kernel too old
[   10.370000] Kernel panic - not syncing: Attempted to kill init!
[   10.370000] CPU1: stopping
[   10.370000] [<c00305e4>] (unwind_backtrace+0x0/0xe0) from [<c002b39c>] (do_IPI+0xe8/0x154)
[   10.380000] [<c002b39c>] (do_IPI+0xe8/0x154) from [<c03239d8>] (__irq_svc+0x38/0xc0)
[   10.390000] Exception stack(0xc7843f90 to 0xc7843fd8)
[   10.390000] 3f80:                                     009b3c48 00000000 c7843fd8 00000000 
[   10.400000] 3fa0: c7842000 c7842000 c043d0c4 c041c02c 00000000 410fb025 60022f14 00000000 
[   10.410000] 3fc0: 7fffffff c7843fd8 c002c53c c002c540 60000013 ffffffff                   
[   10.420000] [<c03239d8>] (__irq_svc+0x38/0xc0) from [<c002c540>] (default_idle+0x24/0x28)
[   10.430000] [<c002c540>] (default_idle+0x24/0x28) from [<c002c6f0>] (cpu_idle+0x58/0x94)
[   10.440000] [<c002c6f0>] (cpu_idle+0x58/0x94) from [<60008084>] (0x60008084)