внезапно пропал HDD на 320 гигабайт
dmesg
[root@localhost userdm]# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33.7-server-2mnb (qateam@titan.mandriva.com) (gcc version 4.4.3 (GCC) ) #1 SMP Mon Sep 20 19:34:25 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7ffb0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 00e00000
found SMP MP-table at [c00ff780] ff780
init_memory_mapping: 0000000000000000-00000000371fe000
0000000000 - 0000200000 page 4k
0000200000 - 0037000000 page 2M
0037000000 - 00371fe000 page 4k
kernel direct mapping tables up to 371fe000 @ 15000-1f000
RAMDISK: 37af3000 - 37fef5e7
Allocated new RAMDISK: 008ef000 - 00deb5e7
Move RAMDISK from 0000000037af3000 - 0000000037fef5e6 to 008ef000 - 00deb5e6
ACPI: RSDP 000fabb0 00014 (v00 ACPIAM)
ACPI: RSDT 7ffb0000 0003C (v01 A_M_I OEMRSDT 09000921 MSFT 00000097)
ACPI: FACP 7ffb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT 7ffb0450 04714 (v01 AS217 AS217154 00000154 INTL 20051117)
ACPI: FACS 7ffc0000 00040
ACPI: APIC 7ffb0390 00080 (v01 A_M_I OEMAPIC 09000921 MSFT 00000097)
ACPI: MCFG 7ffb0410 0003C (v01 A_M_I OEMMCFG 09000921 MSFT 00000097)
ACPI: OEMB 7ffc0040 00060 (v01 A_M_I AMI_OEM 09000921 MSFT 00000097)
ACPI: AAFT 7ffb4b70 00027 (v01 A_M_I OEMAAFT 09000921 MSFT 00000097)
ACPI: SSDT 7ffb4ba0 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
1165MB HIGHMEM available.
881MB LOWMEM available.
mapped low ram: 0 - 371fe000
low ram: 0 - 371fe000
node 0 low ram: 00000000 - 371fe000
node 0 bootmap 0001b000 - 00021e40
(14 early reservations) ==> bootmem [0000000000 - 00371fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000100000 - 00008e6124] TEXT DATA BSS ==> [0000100000 - 00008e6124]
#3 [00008e7000 - 00008ee12b] BRK ==> [00008e7000 - 00008ee12b]
#4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
#5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
#6 [000009f800 - 00000fcb90] BIOS reserved ==> [000009f800 - 00000fcb90]
#7 [00000fccdc - 00000ff780] BIOS reserved ==> [00000fccdc - 00000ff780]
#8 [00000fcb90 - 00000fccdc] MP-table mpc ==> [00000fcb90 - 00000fccdc]
#9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#11 [0000015000 - 000001b000] PGTABLE ==> [0000015000 - 000001b000]
#12 [00008ef000 - 0000deb5e7] NEW RAMDISK ==> [00008ef000 - 0000deb5e7]
#13 [000001b000 - 0000022000] BOOTMAP ==> [000001b000 - 0000022000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000371fe
HighMem 0x000371fe -> 0x0007ffb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffb0
On node 0 totalpages: 524095
free_area_init_node: node 0, pgdat c06786c0, node_mem_map c1001200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1732 pages used for memmap
Normal zone: 219962 pages, LIFO batch:31
HighMem zone: 2332 pages used for memmap
HighMem zone: 296086 pages, LIFO batch:31
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c2200000 s39064 r0 d22376 u524288
pcpu-alloc: s39064 r0 d22376 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999
Kernel command line: BOOT_IMAGE=linux root=UUID=5c89afdb-6776-4998-bca4-83ec17daf038 lapic resume=UUID=a9649327-8e0b-46d2-8c39-5aea4de23dde splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000371fe:0007ffb0)
Memory: 2064524k/2096832k available (3408k kernel code, 30740k reserved, 2333k data, 544k init, 1193672k highmem)
virtual kernel memory layout:
fixmap : 0xff635000 - 0xfffff000 (10024 kB)
pkmap : 0xff200000 - 0xff400000 (2048 kB)
vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
.init : 0xc069c000 - 0xc0724000 ( 544 kB)
.data : 0xc04543ef - 0xc069bb48 (2333 kB)
.text : 0xc0100000 - 0xc04543ef (3408 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2712.435 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.87 BogoMIPS (lpj=27124350)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 15804 entries in 31 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) II X2 215 Processor stepping 02
Booting Node 0, Processors #1
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (10849.67 BogoMIPS).
devtmpfs: initialized
Time: 18:39:09 Date: 11/24/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - AD, should be A8 (20091214/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff] (ignored)
pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xf7eff000-0xf7efffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xf7efec00-0xf7efecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10: [mem 0xf7ef8000-0xf7efbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:07.0: reg 10: [mem 0xf7efd000-0xf7efdfff]
pci 0000:00:07.0: reg 14: [io 0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10: [io 0xd400-0xd407]
pci 0000:00:08.0: reg 14: [io 0xd080-0xd083]
pci 0000:00:08.0: reg 18: [io 0xd000-0xd007]
pci 0000:00:08.0: reg 1c: [io 0xcc00-0xcc03]
pci 0000:00:08.0: reg 20: [io 0xc880-0xc88f]
pci 0000:00:08.0: reg 24: [mem 0xf7efc000-0xf7efcfff]
pci 0000:00:08.1: reg 10: [io 0xc800-0xc807]
pci 0000:00:08.1: reg 14: [io 0xc480-0xc483]
pci 0000:00:08.1: reg 18: [io 0xc400-0xc407]
pci 0000:00:08.1: reg 1c: [io 0xc080-0xc083]
pci 0000:00:08.1: reg 20: [io 0xc000-0xc00f]
pci 0000:00:08.1: reg 24: [mem 0xf7ef7000-0xf7ef7fff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:01:08.0: reg 10: [mem 0xf7fffc00-0xf7fffdff]
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xec00-0xec7f]
pci 0000:02:00.0: reg 30: [mem 0xfaf80000-0xfaffffff pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0580-0x05ff] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0880-0x08ff] has been reserved
system 00:06: [io 0x0d00-0x0d7f] has been reserved
system 00:06: [io 0x0d80-0x0dff] has been reserved
system 00:06: [io 0x1100-0x117f] has been reserved
system 00:06: [io 0x1180-0x11ff] has been reserved
system 00:06: [mem 0xfec80000-0x1fd93ffff] could not be reserved
system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [io 0x0280-0x028f] has been reserved
system 00:0b: [io 0x0290-0x029f] has been reserved
system 00:0c: [mem 0xfc000000-0xfdffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0d: [mem 0xff380000-0xffffffff] could not be reserved
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem disabled]
pci 0000:00:0b.0: bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem disabled]
pci 0000:00:0c.0: bridge window [mem pref disabled]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:01: resource 3 [io 0x0000-0xffff]
pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5105k freed
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1290623949.610:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1713
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
vesafb: framebuffer at 0xf9000000, mapped to 0xf7a80000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:c290
vesafb: pmi: set display start = c00cc2f3, set palette = c00cc34e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
PM: Checking image partition UUID=a9649327-8e0b-46d2-8c39-5aea4de23dde
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
isapnp: No Plug & Play device found
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 2:876:696
rtc_cmos 00:02: setting system clock to 2010-11-24 18:39:10 UTC (1290623950)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 544k freed
SCSI subsystem initialized
libata version 3.00 loaded.
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:08.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200AAKS-00L9A0, 01.03E01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: HPA detected: current 488395055, native 488397168
ata3.00: ATA-8: SAMSUNG HD252KJ, CM100-10, max UDMA7
ata3.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
ata3.00: configured for UDMA/133
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x380000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { 10B8B Dispar BadCRC }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: nv: skipping hardreset on occupied port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/100
ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata1.00: revalidation failed (errno=-5)
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD252KJ CM10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
sd 2:0:0:0: [sdb] Attached SCSI disk
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.06, max UDMA/66
ata4.00: configured for UDMA/66
scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.06 PQ: 0 ANSI: 5
ata1: hard resetting link
ata1: nv: skipping hardreset on occupied port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata1.00: revalidation failed (errno=-5)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: hard resetting link
ata1: nv: skipping hardreset on occupied port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: model number mismatch 'WDC WD3200AAKS-00L9A0' != 'C WD3200AAKS-00L9A0 �'
ata1.00: revalidation failed (errno=-19)
ata1.00: disabled
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200AAKS-00L9A0, 01.03E01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 07
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: rejecting I/O to offline device
ata1: EH complete
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
ldm_validate_partition_table(): Disk read failed.
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: [sda] READ CAPACITY(16) failed
sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: [sda] Sense not available.
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: [sda] READ CAPACITY failed
unable to read partition table
sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Sense not available.
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: [sda] Asking for cache data failed
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: detected capacity change from 320072933376 to 0
ata1.00: detaching (SCSI 0:0:0:0)
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
pata_acpi 0000:00:06.0: setting latency timer to 64
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ata6: port disabled. ignoring.
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sdb1): mounted filesystem with ordered data mode
scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
Tomoyo security MAC extension available but disabled by default. If you want to
enable and use it, ccs-tools package must be installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x380000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { 10B8B Dispar BadCRC }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: nv: skipping hardreset on occupied port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata1.00: revalidation failed (errno=-5)
ata1: hard resetting link
ata1: nv: skipping hardreset on occupied port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: model number mismatch 'WDC WD3200AAKS-00L9A0' != 'C WD3200AAKS-00L9A0 �'
ata1.00: revalidation failed (errno=-19)
ata1: limiting SATA link speed to 1.5 Gbps
ata1.00: limiting speed to UDMA/133:PIO3
ata1: hard resetting link
ata1: nv: skipping hardreset on occupied port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata1.00: revalidation failed (errno=-5)
ata1.00: disabled
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200AAKS-00L9A0, 01.03E01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: model number mismatch 'WDC WD3200AAKS-00L9A0' != 'C WD3200AAKS-00L9A0 �'
ata1.00: revalidation failed (errno=-19)
ata1: limiting SATA link speed to 1.5 Gbps
ata1.00: limiting speed to UDMA/133:PIO3
ata1: hard resetting link
ata1: nv: skipping hardreset on occupied port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: model number mismatch 'WDC WD3200AAKS-00L9A0' != 'C WD3200AAKS-00L9A0 �'
ata1.00: revalidation failed (errno=-19)
ata1.00: disabled
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 07
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: rejecting I/O to offline device
ata1: EH complete
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
ldm_validate_partition_table(): Disk read failed.
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: [sda] READ CAPACITY(16) failed
sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: [sda] Sense not available.
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: [sda] READ CAPACITY failed
sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Sense not available.
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
unable to read partition table
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: [sda] Asking for cache data failed
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: detected capacity change from 320072933376 to 0
ata1.00: detaching (SCSI 0:0:0:0)
sd 0:0:0:0: [sda] READ CAPACITY(16) failed
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Sense not available.
sd 0:0:0:0: [sda] READ CAPACITY failed
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Sense not available.
sd 0:0:0:0: [sda] Asking for cache data failed
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: [sda] Stopping disk
sd 0:0:0:0: [sda] START_STOP FAILED
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
udev: starting version 153
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 21, io mem 0xf7eff000
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.7-server-2mnb ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 20, io mem 0xf7efec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.7-server-2mnb ehci_hcd
usb usb2: SerialNumber: 0000:00:02.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:07.0: setting latency timer to 64
scsi 1:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
scsi 3:0:0:0: Attached scsi generic sg2 type 5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr1
ppdev: user-space parallel port driver
usb 2-5: new high speed USB device using ehci_hcd and address 4
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:e9:b6:4d
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
i2c i2c-0: nForce2 SMBus adapter at 0x600
i2c i2c-1: nForce2 SMBus adapter at 0x700
usb 2-5: New USB device found, idVendor=058f, idProduct=6362
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: Mass Storage Device
usb 2-5: Manufacturer: Generic
usb 2-5: SerialNumber: 058F312D81B
Initializing USB Mass Storage driver...
scsi6 : usb-storage 2-5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:05.0: setting latency timer to 64
saa7146: register extension 'budget dvb'.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
budget dvb 0000:01:08.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
IRQ 19/: IRQF_DISABLED is not guaranteed on shared IRQs
saa7146: found saa7146 @ mem f83fcc00 (revision 1, irq 19) (0x13c2,0x1018).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget-S-1401 PCI)
adapter has MAC addr = 00:d0:5c:c6:93:91
LNBx2x attached on addr=8
DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)...
usb 1-3: new full speed USB device using ohci_hcd and address 2
usb 1-3: New USB device found, idVendor=0a12, idProduct=0001
usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3: Product: BT2.0
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0)
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs: mic=0x1a, fmic=0x1e, line=0x1b, fline=0x0, cd=0x1f, aux=0x0
usb 1-4: new low speed USB device using ohci_hcd and address 3
usb 1-4: New USB device found, idVendor=09da, idProduct=000a
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Mouse
usb 1-4: Manufacturer: A4Tech
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input3
a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:02.0-4/input0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.21 Thu Nov 4 20:24:24 PDT 2010
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 6:0:0:2: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sda] Attached SCSI removable disk
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 6:0:0:3: Attached scsi generic sg6 type 0
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
EXT4-fs (dm-0): mounted filesystem with ordered data mode
loop: module loaded
Adding 4095464k swap on /dev/sdb5. Priority:-1 extents:1 across:4095464k
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
vboxdrv: counter framework which can generate NMIs is active. You have to prevent
vboxdrv: the usage of hardware performance counters by
vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x4b3 offMax=0x2bb0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.10_OSE (interface 0x00140001).
IPv6: Loaded, but administratively disabled, reboot required to enable
forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
NET: Registered protocol family 17
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_set version 4 loaded
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
xt_time: kernel timezone is +0600
u32 classifier
Actions configured
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
fuse init (API version 7.13)
[root@localhost userdm]#fdisk -l
[root@localhost userdm]# fdisk -l
Диск /dev/sdb: 250.1 ГБ, 250058268160 байт
16 heads, 63 sectors/track, 484518 cylinders
Units = цилиндры of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xa8a8a8a8
Устр-во Загр Начало Конец Блоки Id Система
/dev/sdb1 * 1 62006 31250992+ 83 Linux
/dev/sdb2 62007 484518 212946048 5 Расширенный
/dev/sdb5 62007 70132 4095472+ 82 Linux своп / Solaris
/dev/sdb6 70133 273623 102559432+ 83 Linux
/dev/sdb7 273624 327683 27246208+ 83 Linux
/dev/sdb8 327684 484518 79044808+ 83 Linux
Диск /dev/dm-0: 105.0 ГБ, 105020330496 байт
255 heads, 63 sectors/track, 12767 cylinders
Units = цилиндры of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
На диске /dev/dm-0 отсутствует верная таблица разделов
[root@localhost userdm]# был и не стало (((
диск был в ext4
