Уважаемые посетители!

-regent- · 23.09.2011 17:41:11

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Все тот же результат:

Консоль:

rc-update add udevd sysinit
* rc-update: service `udevd' does not exist

-regent- · 23.09.2011 17:45:12

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

У меня в init.d такой набор:

Консоль:

coder13-LaptopN130 / # cd /etc/init.d
coder13-LaptopN130 init.d # ls
alsasound dmeventd mdev pydoc-3.1 syslog-ng
bluetooth fsck modules reboot.sh termencoding
bootmisc functions.sh mount-ro root udev
consolefont git-daemon mtab rsyncd udev-dev-tarball
consolekit gpm net.lo saslauthd udev-mount
consoletrans hostname netmount savecache udev-postmount
crypto-loop hwclock network shutdown.sh urandom
cupsd keymaps nscd sshd wicd
dbus killprocs numlock staticroute wpa_supplicant
devfs local pciparm swap xdm
device-mapper localmount procfs swclock xdm-setup
dhcpcd lvm pwcheck sysctl
dmesg lvm-monitoring pydoc-2.7 sysfs

Lupo Alberto · 23.09.2011 17:50:07

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

-regent-, вы правы — я сейчас на машине с Funtoo и там это udevd, подключился к Gentoo — там это udev oO

Был, был и весь вышел...

-regent- · 23.09.2011 17:54:28

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Ясно) Ну тогда все добавил в автозапуск... Сейчас проверю, помогло ли... )

-regent- · 23.09.2011 18:09:16

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Нет... 0 реакции... Как не видел сетей, так и не видит...

-regent- · 23.09.2011 19:12:50

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Залез под капот ноута, убедился. что Wi-Fi карточка подключена через miniPCI-E, а не встроена.. Может проблема как-то с этим связана?..

Lupo Alberto · 23.09.2011 19:48:41

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

-regent- пишет:

Может проблема как-то с этим связана?..

Возможно. Включите и опцию CONFIG_ATH9K_PCI
Покажите вывод команд

Консоль:

lspci -k | grep Wireless -A 3

Консоль:

egrep ATH9 /usr/src/linux/.config

Консоль:

find /lib/modules/`uname -r` -name 'ath9*'

Был, был и весь вышел...

-regent- · 25.09.2011 14:19:28

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Пересобрал ядро, включив поддержку PCI, теперь карточка видна в системе, но сети всеравно не находятся... Повторяю все отчеты с новым ядром:
lspci -k:

+ открыть спойлер

00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device c05d
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c05d
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c05d
Kernel driver in use: i801_smbus
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e025
Kernel driver in use: ath9k
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c04d
Kernel driver in use: r8169

iwconfig:

+ открыть спойлер

lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=off
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

sit0 no wireless extensions.

ifconfig:

+ открыть спойлер

eth0 Link encap:Ethernet HWaddr 00:24:54:85:e7:4e
inet addr:192.168.0.101 Bcast:255.255.255.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:576 Metric:1
RX packets:7508 errors:0 dropped:0 overruns:0 frame:0
TX packets:6950 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2177518 (2.0 MiB) TX bytes:539085 (526.4 KiB)
Interrupt:42

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:24 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1872 (1.8 KiB) TX bytes:1872 (1.8 KiB)

sit0 Link encap:IPv6-in-IPv4
inet6 addr: ::127.0.0.1/96 Scope:Unknown
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

-regent- · 25.09.2011 14:23:13

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

lspci -k | grep Wireless -A 3:

+ открыть спойлер

02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e025
Kernel driver in use: ath9k
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

egrep ATH9 /usr/src/linux/.config:

+ открыть спойлер

CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_RATE_CONTROL=y
# CONFIG_ATH9K_HTC is not set

А вот на

Консоль:

find /lib/modules/`uname -r` -name 'ath9*'

ноль реакции...

-regent- · 25.09.2011 14:54:45

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Нет, ошибся, в системе она так и не видна... Захожу в WPA SUPLICANT ADMINISTRATION GUI - в раскрывающемся меню Adapter не видно ни одного устройства... Что же делать, друзья?

Lupo Alberto · 25.09.2011 16:17:26

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

-regent- пишет:

Что же делать, друзья?

Правильно собирать ядро.
P.S.
Команда

Консоль:

modprobe ath9k

выполняется?

Виден ли загруженный модуль?

Консоль:

lsmod | grep ath9

Был, был и весь вышел...

Lupo Alberto · 25.09.2011 16:21:34

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

-regent- пишет:

Нет, ошибся, в системе она так и не видна... Захожу в WPA SUPLICANT ADMINISTRATION GUI - в раскрывающемся меню Adapter не видно ни одного устройства...

Я уже сам запутался.
Удалите (переместите) файл /etc/udev/rules.d/70-persistent-net.rules, перегрузитесь и покажите вывод команды dmesg

Был, был и весь вышел...

-regent- · 25.09.2011 16:28:38

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Удалил... Вот dmesg (первая половина; все не влезло в сообщение):

+ открыть спойлер

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.1 (root@coder13-N130) (gcc version 4.4.5 (Gentoo 4.4.5 p1.3, pie-0.4.5) ) #1 SMP Fri Sep 23 23:58:19 MSK 2011
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6c0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6c0000 - 000000007f6d1000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6d1000 - 000000007f6d2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6d2000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. N130 /N130 , BIOS 06CM.M021.20100108.JIP 01/08/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6c0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f7140] f7140
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1f1f000-2000000
[ 0.000000] ACPI: RSDP 000f7110 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7f6ca494 00084 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6d0bd2 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 7f6cc13c 04A22 (v01 INTEL CALISTGA 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 7f6d1fc0 00040
[ 0.000000] ACPI: APIC 7f6d0cc6 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 7f6d0d2e 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7f6d0d66 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 7f6d0da2 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: TMOR 7f6d0dd4 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 7f6d0dfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7f6d0e62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 7f6d0e8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 7f6cbaed 0064F (v01 SataRe SataPri 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6cb451 0069C (v01 SataRe SataSec 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6ca518 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f6c0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6c0
[ 0.000000] On node 0 totalpages: 521807
[ 0.000000] free_area_init_node: node 0, pgdat c19347c0, node_mem_map f680d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292292 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f67e9000 s24640 r0 d24512 u49152
[ 0.000000] pcpu-alloc: s24640 r0 d24512 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517729
[ 0.000000] Kernel command line: root=/dev/sda4 i915.modeset=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6c0)
[ 0.000000] Memory: 2058424k/2087680k available (6763k kernel code, 28804k reserved, 2709k data, 452k init, 1178376k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1941000 - 0xc19b2000 ( 452 kB)
[ 0.000000] .data : 0xc169ac70 - 0xc19401c0 (2709 kB)
[ 0.000000] .text : 0xc1000000 - 0xc169ac70 (6763 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 1595.978 MHz processor.
[ 0.003006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.95 BogoMIPS (lpj=1595978)
[ 0.003229] pid_max: default: 32768 minimum: 301
[ 0.003392] Security Framework initialized
[ 0.003503] SELinux: Initializing.
[ 0.003617] SELinux: Starting in permissive mode
[ 0.003653] Mount-cache hash table entries: 512
[ 0.004115] Initializing cgroup subsys cpuacct
[ 0.004234] Initializing cgroup subsys freezer
[ 0.004378] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.004496] CPU: Physical Processor ID: 0
[ 0.004604] CPU: Processor Core ID: 0
[ 0.004709] mce: CPU supports 5 MCE banks
[ 0.004827] CPU0: Thermal monitoring enabled (TM1)
[ 0.004939] using mwait in idle threads.
[ 0.005140] ACPI: Core revision 20110413
[ 0.012139] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012655] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.022840] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.023998] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.023998] ... version: 3
[ 0.023998] ... bit width: 40
[ 0.023998] ... generic registers: 2
[ 0.023998] ... value mask: 000000ffffffffff
[ 0.023998] ... max period: 000000007fffffff
[ 0.023998] ... fixed-purpose events: 3
[ 0.023998] ... event mask: 0000000700000003
[ 0.024574] CPU 1 irqstacks, hard=f6090000 soft=f6092000
[ 0.024581] Booting Node 0, Processors #1 Ok.
[ 0.024737] smpboot cpu 1: start_ip = 9b000
[ 0.003999] Initializing CPU#1
[ 0.003999] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.096017] Brought up 2 CPUs
[ 0.096343] Total of 2 processors activated (6383.79 BogoMIPS).
[ 0.097156] kworker/u:0 used greatest stack depth: 7196 bytes left
[ 0.097359] PM: Registering ACPI NVS region at 7f6d1000 (4096 bytes)
[ 0.098169] Time: 10:40:29 Date: 09/25/11
[ 0.098367] NET: Registered protocol family 16
[ 0.099087] ACPI: bus type pci registered
[ 0.099216] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.100018] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.100135] PCI: Using MMCONFIG for extended config space
[ 0.100246] PCI: Using configuration type 1 for base access
[ 0.101065] kworker/u:0 used greatest stack depth: 7076 bytes left
[ 0.129196] bio: create slab <bio-0> at 0
[ 0.132271] ACPI: EC: Look up EC in DSDT
[ 0.135973] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.139291] ACPI: SSDT 7f6cb138 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.140012] ACPI: Dynamic OEM Table Load:
[ 0.140214] ACPI: SSDT (null) 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.140814] ACPI: SSDT 7f6caa0e 006A5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.141388] ACPI: Dynamic OEM Table Load:
[ 0.141585] ACPI: SSDT (null) 006A5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.142531] ACPI: SSDT 7f6cb37d 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.143230] ACPI: Dynamic OEM Table Load:
[ 0.143429] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.143894] ACPI: SSDT 7f6cb0b3 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.144486] ACPI: Dynamic OEM Table Load:
[ 0.144683] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.146102] ACPI: Interpreter enabled
[ 0.146221] ACPI: (supports S0 S3 S4 S5)
[ 0.146541] ACPI: Using IOAPIC for interrupt routing
[ 0.164212] ACPI: Power Resource [FN00] (off)
[ 0.165223] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.166356] ACPI: No dock devices found.
[ 0.166469] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.168791] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.170593] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.170712] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.170829] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.170991] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.171160] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.171329] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.171496] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.171669] pci_bus 0000:00: scanning bus
[ 0.171690] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.171707] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.171741] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x14b
[ 0.171751] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.171785] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.171796] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.171810] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf007ffff]
[ 0.171821] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.171832] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.171844] pci 0000:00:02.0: reg 1c: [mem 0xf0200000-0xf023ffff]
[ 0.171868] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x14b
[ 0.171876] pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.171909] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.171920] pci 0000:00:02.1: calling quirk_mmio_always_on+0x0/0x17
[ 0.171932] pci 0000:00:02.1: reg 10: [mem 0xf0080000-0xf00fffff]
[ 0.171994] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x14b
[ 0.172003] pci 0000:00:02.1: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.172098] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.172110] pci 0000:00:1b.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.172141] pci 0000:00:1b.0: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.172212] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x14b
[ 0.172221] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.172260] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.172269] pci 0000:00:1b.0: PME# disabled
[ 0.172307] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.172316] pci 0000:00:1c.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.172382] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x14b
[ 0.172391] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.172436] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.172444] pci 0000:00:1c.0: PME# disabled
[ 0.172491] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.172501] pci 0000:00:1c.2: calling quirk_mmio_always_on+0x0/0x17
[ 0.172566] pci 0000:00:1c.2: calling quirk_resource_alignment+0x0/0x14b
[ 0.172574] pci 0000:00:1c.2: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.172618] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.172627] pci 0000:00:1c.2: PME# disabled
[ 0.172670] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.172679] pci 0000:00:1d.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.172748] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.172784] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x14b
[ 0.172793] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.172819] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.172828] pci 0000:00:1d.1: calling quirk_mmio_always_on+0x0/0x17
[ 0.172896] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.172932] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x14b
[ 0.172940] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.172967] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.172976] pci 0000:00:1d.2: calling quirk_mmio_always_on+0x0/0x17
[ 0.173051] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.173088] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x14b
[ 0.173096] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.173128] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.173138] pci 0000:00:1d.3: calling quirk_mmio_always_on+0x0/0x17
[ 0.173207] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.173243] pci 0000:00:1d.3: calling quirk_resource_alignment+0x0/0x14b
[ 0.173251] pci 0000:00:1d.3: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.173291] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.173309] pci 0000:00:1d.7: calling quirk_mmio_always_on+0x0/0x17
[ 0.173332] pci 0000:00:1d.7: reg 10: [mem 0xf0444000-0xf04443ff]
[ 0.173416] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x14b
[ 0.173424] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.173458] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.173468] pci 0000:00:1d.7: PME# disabled
[ 0.173501] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.173515] pci 0000:00:1e.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.173568] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x14b
[ 0.173576] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.173627] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.173642] pci 0000:00:1f.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.173750] pci 0000:00:1f.0: calling ich_force_enable_hpet+0x0/0x190
[ 0.173759] pci 0000:00:1f.0: calling quirk_ich7_lpc+0x0/0x52
[ 0.173772] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.173947] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.174016] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x14b
[ 0.174028] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.174085] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.174099] pci 0000:00:1f.2: calling quirk_mmio_always_on+0x0/0x17
[ 0.174121] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.174139] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.174155] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.174172] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.174189] pci 0000:00:1f.2: reg 20: [io 0x1810-0x181f]
[ 0.174224] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x14b
[ 0.174233] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.174259] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.174267] pci 0000:00:1f.2: PME# disabled
[ 0.174293] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.174302] pci 0000:00:1f.3: calling quirk_mmio_always_on+0x0/0x17
[ 0.174378] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.174417] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x14b
[ 0.174425] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2c
[ 0.174446] pci_bus 0000:00: fixups for bus
[ 0.174455] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 0
[ 0.174523] pci_bus 0000:02: scanning bus
[ 0.174558] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 0.174568] pci 0000:02:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.174604] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
[ 0.174692] pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x14b
[ 0.174739] pci 0000:02:00.0: supports D1
[ 0.174744] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.174754] pci 0000:02:00.0: PME# disabled
[ 0.176014] pci_bus 0000:02: fixups for bus
[ 0.176022] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.176140] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.176151] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.176165] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.176172] pci_bus 0000:02: bus scan returning with max=02
[ 0.176182] pci 0000:00:1c.2: scanning [bus 03-03] behind bridge, pass 0
[ 0.176252] pci_bus 0000:03: scanning bus
[ 0.176286] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.176297] pci 0000:03:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.176323] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.176369] pci 0000:03:00.0: reg 18: [mem 0xf0510000-0xf0510fff 64bit pref]
[ 0.176399] pci 0000:03:00.0: reg 20: [mem 0xf0500000-0xf050ffff 64bit pref]
[ 0.176421] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.176435] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x14b
[ 0.176491] pci 0000:03:00.0: supports D1 D2
[ 0.176497] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.176507] pci 0000:03:00.0: PME# disabled
[ 0.178014] pci_bus 0000:03: fixups for bus
[ 0.178021] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.178138] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.178148] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.178162] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.178168] pci_bus 0000:03: bus scan returning with max=03
[ 0.178179] pci 0000:00:1e.0: scanning [bus 04-04] behind bridge, pass 0
[ 0.178219] pci_bus 0000:04: scanning bus
[ 0.178280] pci_bus 0000:04: fixups for bus
[ 0.178285] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.178405] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.178415] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.178428] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.178435] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.178442] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.178449] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.178456] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.178463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.178470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.178477] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.178484] pci_bus 0000:04: bus scan returning with max=04
[ 0.178494] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 1
[ 0.178507] pci 0000:00:1c.2: scanning [bus 03-03] behind bridge, pass 1
[ 0.178521] pci 0000:00:1e.0: scanning [bus 04-04] behind bridge, pass 1
[ 0.178531] pci_bus 0000:00: bus scan returning with max=04
[ 0.178536] pci_bus 0000:00: on NUMA node 0
[ 0.178545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.178912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.179053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.179226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.179706] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.179821] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.179986] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.189169] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.190432] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.191328] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.192103] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.192860] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.193738] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.194659] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.195451] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.196207] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.196214] vgaarb: loaded
[ 0.196318] vgaarb: bridge control possible 0000:00:02.0
[ 0.197191] SCSI subsystem initialized
[ 0.197191] libata version 3.00 loaded.
[ 0.198086] usbcore: registered new interface driver usbfs
[ 0.198194] usbcore: registered new interface driver hub
[ 0.199046] usbcore: registered new device driver usb
[ 0.200020] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.200020] PCI: Using ACPI for IRQ routing
[ 0.212012] PCI: pci_cache_line_size set to 64 bytes
[ 0.212037] pci 0000:00:02.0: BAR 0: reserving [mem 0xf0000000-0xf007ffff flags 0x40200] (d=0, p=0)
[ 0.212047] pci 0000:00:02.0: BAR 1: reserving [io 0x1800-0x1807 flags 0x40101] (d=0, p=0)
[ 0.212055] pci 0000:00:02.0: BAR 2: reserving [mem 0xd0000000-0xdfffffff flags 0x42208] (d=0, p=0)
[ 0.212064] pci 0000:00:02.0: BAR 3: reserving [mem 0xf0200000-0xf023ffff flags 0x40200] (d=0, p=0)
[ 0.212075] pci 0000:00:02.1: BAR 0: reserving [mem 0xf0080000-0xf00fffff flags 0x40200] (d=0, p=0)
[ 0.212087] pci 0000:00:1b.0: BAR 0: reserving [mem 0xf0440000-0xf0443fff flags 0x140204] (d=0, p=0)
[ 0.212105] pci 0000:00:1d.0: BAR 4: reserving [io 0x1820-0x183f flags 0x40101] (d=0, p=0)
[ 0.212116] pci 0000:00:1d.1: BAR 4: reserving [io 0x1840-0x185f flags 0x40101] (d=0, p=0)
[ 0.212127] pci 0000:00:1d.2: BAR 4: reserving [io 0x1860-0x187f flags 0x40101] (d=0, p=0)
[ 0.212140] pci 0000:00:1d.3: BAR 4: reserving [io 0x1880-0x189f flags 0x40101] (d=0, p=0)
[ 0.212152] pci 0000:00:1d.7: BAR 0: reserving [mem 0xf0444000-0xf04443ff flags 0x40200] (d=0, p=0)
[ 0.212168] pci 0000:00:1f.2: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[ 0.212177] pci 0000:00:1f.2: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0)
[ 0.212185] pci 0000:00:1f.2: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0)
[ 0.212193] pci 0000:00:1f.2: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0)
[ 0.212201] pci 0000:00:1f.2: BAR 4: reserving [io 0x1810-0x181f flags 0x40101] (d=0, p=0)
[ 0.212213] pci 0000:00:1f.3: BAR 4: reserving [io 0x18a0-0x18bf flags 0x40101] (d=0, p=0)
[ 0.212225] pci 0000:02:00.0: BAR 0: reserving [mem 0xf0100000-0xf010ffff flags 0x140204] (d=0, p=0)
[ 0.212237] pci 0000:03:00.0: BAR 0: reserving [io 0x2000-0x20ff flags 0x40101] (d=0, p=0)
[ 0.212246] pci 0000:03:00.0: BAR 2: reserving [mem 0xf0510000-0xf0510fff flags 0x14220c] (d=0, p=0)
[ 0.212254] pci 0000:03:00.0: BAR 4: reserving [mem 0xf0500000-0xf050ffff flags 0x14220c] (d=0, p=0)
[ 0.212310] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.212317] reserve RAM buffer: 000000007f6c0000 - 000000007fffffff
[ 0.213502] NetLabel: Initializing
[ 0.213619] NetLabel: domain hash size = 128
[ 0.213984] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.214119] NetLabel: unlabeled traffic allowed by default
[ 0.214271] cfg80211: Calling CRDA to update world regulatory domain
[ 0.214431] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.214431] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.214454] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.218008] Switching to clocksource hpet
[ 0.218705] Switched to NOHz mode on CPU #0
[ 0.218829] Switched to NOHz mode on CPU #1
[ 0.223511] pnp: PnP ACPI init
[ 0.223650] ACPI: bus type pnp registered
[ 0.224610] pnp 00:00: [bus 00-ff]
[ 0.224619] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.224626] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.224632] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.224638] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.224645] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.224651] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.224657] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.224663] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.224670] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.224676] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.224682] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.224688] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.224694] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.224701] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.224707] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.224713] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.224719] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.224726] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.224732] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.225040] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.225126] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.225132] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.225139] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.225144] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.225150] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.225156] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.225162] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.225167] pnp 00:01: [mem 0xfed45000-0xfed8ffff]

-regent- · 25.09.2011 16:29:59

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Вот вторая половина dmesg:

+ открыть спойлер

[ 0.225379] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.225502] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.225618] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.225736] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.225852] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.225974] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.226119] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.226237] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.226351] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.227128] pnp 00:02: [io 0x0000-0x001f]
[ 0.227135] pnp 00:02: [io 0x0081-0x0091]
[ 0.227141] pnp 00:02: [io 0x0093-0x009f]
[ 0.227146] pnp 00:02: [io 0x00c0-0x00df]
[ 0.227152] pnp 00:02: [dma 4]
[ 0.227372] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.227404] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.227588] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.227770] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.228002] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.228146] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.228182] pnp 00:05: [io 0x00f0]
[ 0.228202] pnp 00:05: [irq 13]
[ 0.228403] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.228437] pnp 00:06: [io 0x0061]
[ 0.228443] pnp 00:06: [io 0x0063]
[ 0.228448] pnp 00:06: [io 0x0065]
[ 0.228453] pnp 00:06: [io 0x0067]
[ 0.228458] pnp 00:06: [io 0x0070]
[ 0.228463] pnp 00:06: [io 0x0080]
[ 0.228467] pnp 00:06: [io 0x0092]
[ 0.228473] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.228478] pnp 00:06: [io 0x0680-0x069f]
[ 0.228488] pnp 00:06: [io 0x0800-0x080f]
[ 0.228494] pnp 00:06: [io 0x1000-0x107f]
[ 0.228499] pnp 00:06: [io 0x1180-0x11bf]
[ 0.228504] pnp 00:06: [io 0x1640-0x164f]
[ 0.228743] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.228863] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.228976] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.229111] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.229227] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.229340] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229428] pnp 00:07: [io 0x06a0-0x06af]
[ 0.229434] pnp 00:07: [io 0x06b0-0x06ff]
[ 0.229673] system 00:07: [io 0x06a0-0x06af] has been reserved
[ 0.229789] system 00:07: [io 0x06b0-0x06ff] has been reserved
[ 0.229902] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229931] pnp 00:08: [io 0x0070-0x0077]
[ 0.229948] pnp 00:08: [irq 8]
[ 0.230169] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.230252] pnp 00:09: [io 0x0060]
[ 0.230258] pnp 00:09: [io 0x0064]
[ 0.230273] pnp 00:09: [irq 1]
[ 0.230470] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.230508] pnp 00:0a: [irq 12]
[ 0.230697] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.231083] pnp: PnP ACPI: found 11 devices
[ 0.231193] ACPI: ACPI bus type pnp unregistered
[ 0.277389] PCI: max bus depth: 1 pci_try_num: 2
[ 0.277449] pci 0000:00:1c.2: BAR 8: assigned [mem 0x80000000-0x800fffff]
[ 0.277575] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.277751] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.277864] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.277975] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.278126] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.278244] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.278416] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0520000-0xf053ffff pref]
[ 0.278580] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.278690] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.278807] pci 0000:00:1c.2: bridge window [mem 0x80000000-0x803fffff]
[ 0.278924] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.279120] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.279229] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.279341] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.279454] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.279608] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.279727] pci 0000:00:1c.0: setting latency timer to 64
[ 0.279750] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.279868] pci 0000:00:1c.2: setting latency timer to 64
[ 0.279882] pci 0000:00:1e.0: setting latency timer to 64
[ 0.279892] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.279898] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.279904] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279911] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.279917] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.279924] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.279931] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.279937] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.279944] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.279951] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.279957] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.279963] pci_bus 0000:03: resource 1 [mem 0x80000000-0x803fffff]
[ 0.279970] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.279977] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.279984] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.279990] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279996] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.280025] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.280033] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.280039] pci_bus 0000:04: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.280116] NET: Registered protocol family 2
[ 0.280344] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.281048] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.282430] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.283068] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.283195] TCP reno registered
[ 0.283313] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.283439] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.283785] NET: Registered protocol family 1
[ 0.284198] RPC: Registered named UNIX socket transport module.
[ 0.284314] RPC: Registered udp transport module.
[ 0.284421] RPC: Registered tcp transport module.
[ 0.284529] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.284661] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x147
[ 0.284674] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x40
[ 0.284683] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.284692] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x98
[ 0.284705] pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x147
[ 0.284713] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x40
[ 0.284721] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.284729] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x98
[ 0.284735] pci 0000:00:02.0: Boot video device
[ 0.284746] pci 0000:00:02.1: calling quirk_e100_interrupt+0x0/0x147
[ 0.284753] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x40
[ 0.284761] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.284769] pci 0000:00:02.1: calling pci_fixup_video+0x0/0x98
[ 0.284779] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x147
[ 0.284787] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x40
[ 0.284794] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.284802] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0x98
[ 0.284813] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x147
[ 0.284821] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x40
[ 0.284829] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.284837] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0x98
[ 0.284848] pci 0000:00:1c.2: calling quirk_e100_interrupt+0x0/0x147
[ 0.284855] pci 0000:00:1c.2: calling quirk_cardbus_legacy+0x0/0x40
[ 0.284863] pci 0000:00:1c.2: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.284871] pci 0000:00:1c.2: calling pci_fixup_video+0x0/0x98
[ 0.284882] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x147
[ 0.284890] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x40
[ 0.284898] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.284909] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b
[ 0.284915] pci 0000:00:1d.0: Performing full reset
[ 0.284935] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0x98
[ 0.284946] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x147
[ 0.284953] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x40
[ 0.284961] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.284971] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.284976] pci 0000:00:1d.1: Performing full reset
[ 0.284996] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0x98
[ 0.285037] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x147
[ 0.285048] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x40
[ 0.285058] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.285067] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.285072] pci 0000:00:1d.2: Performing full reset
[ 0.285091] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0x98
[ 0.285104] pci 0000:00:1d.3: calling quirk_e100_interrupt+0x0/0x147
[ 0.285112] pci 0000:00:1d.3: calling quirk_cardbus_legacy+0x0/0x40
[ 0.285120] pci 0000:00:1d.3: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.285130] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.285135] pci 0000:00:1d.3: Performing full reset
[ 0.285154] pci 0000:00:1d.3: calling pci_fixup_video+0x0/0x98
[ 0.285164] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x147
[ 0.285172] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x40
[ 0.285180] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.285224] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0x98
[ 0.285236] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x147
[ 0.285244] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x40
[ 0.285252] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.285259] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0x98
[ 0.285271] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x147
[ 0.285279] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x40
[ 0.285287] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.285295] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0x98
[ 0.285306] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x147
[ 0.285314] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x40
[ 0.285322] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.285329] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0x98
[ 0.285341] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x147
[ 0.285348] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x40
[ 0.285356] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.285364] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0x98
[ 0.285375] pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x40
[ 0.285383] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.285391] pci 0000:02:00.0: calling pci_fixup_video+0x0/0x98
[ 0.285402] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x40
[ 0.285410] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x5af
[ 0.285418] pci 0000:03:00.0: calling pci_fixup_video+0x0/0x98
[ 0.285427] PCI: CLS 64 bytes, default 64
[ 0.285564] Simple Boot Flag at 0x36 set to 0x1
[ 0.288282] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
[ 0.288413] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
[ 0.288664] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.289685] audit: initializing netlink socket (disabled)
[ 0.289825] type=2000 audit(1316947229.288:1): initialized
[ 0.333760] highmem bounce pool size: 64 pages
[ 0.333879] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.337046] kworker/u:0 used greatest stack depth: 7016 bytes left
[ 0.345232] VFS: Disk quotas dquot_6.5.2
[ 0.345612] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.350178] msgmni has been set to 1718
[ 0.350579] SELinux: Registering netfilter hooks
[ 0.351716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.351889] io scheduler noop registered
[ 0.351994] io scheduler deadline registered
[ 0.352222] io scheduler cfq registered (default)
[ 0.352600] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.352683] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.352892] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.352964] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.353583] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.353962] intel_idle: MWAIT substates: 0x20220
[ 0.353981] intel_idle: v0.4 model 0x1C
[ 0.353985] intel_idle: lapic_timer_reliable_states 0x2
[ 0.353999] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.355266] ACPI: AC Adapter [ADP1] (on-line)
[ 0.356073] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.356303] ACPI: Lid Switch [LID0]
[ 0.356604] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.356777] ACPI: Power Button [PWRB]
[ 0.357088] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.357258] ACPI: Sleep Button [SLPB]
[ 0.357551] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.357717] ACPI: Power Button [PWRF]
[ 0.358208] ACPI: Fan [FAN0] (off)
[ 0.362090] acpi device:04: registered as cooling_device1
[ 0.362531] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.362708] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.362969] ACPI: acpi_idle yielding to intel_idle
[ 0.368323] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.368441] ACPI: Thermal Zone [TZ00] (49 C)
[ 0.369076] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.375080] ACPI: Battery Slot [BAT1] (battery present)
[ 0.390382] Non-volatile memory driver v1.3
[ 0.390558] intel_rng: FWH not detected
[ 0.390675] Linux agpgart interface v0.103
[ 0.391099] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 0.391379] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.391699] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.392146] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.392559] [drm] Initialized drm 1.1.0 20060810
[ 0.392725] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.392843] i915 0000:00:02.0: setting latency timer to 64
[ 0.432671] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.432792] [drm] Driver supports precise vblank timestamp query.
[ 0.433121] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.752851] [drm] initialized overlay support
[ 0.770899] fbcon: inteldrmfb (fb0) is primary device
[ 0.820886] Console: switching to colour frame buffer device 128x37
[ 0.827649] fb0: inteldrmfb frame buffer device
[ 0.827744] drm: registered panic notifier
[ 0.827849] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 0.834139] brd: module loaded
[ 0.837234] loop: module loaded
[ 0.838339] ata_piix 0000:00:1f.2: version 2.13
[ 0.838395] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.838546] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.992052] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.993427] scsi0 : ata_piix
[ 0.996460] scsi1 : ata_piix
[ 1.000874] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.003520] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.006313] ata2: port disabled. ignoring.
[ 1.006880] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.009781] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.012791] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 1.015721] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.018751] CAN device driver interface
[ 1.021746] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.024679] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.027936] sky2: driver version 1.28
[ 1.031191] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.034089] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.036963] r8169 0000:03:00.0: enabling Mem-Wr-Inval
[ 1.037035] r8169 0000:03:00.0: setting latency timer to 64
[ 1.037126] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[ 1.037932] r8169 0000:03:00.0: eth0: RTL8102e at 0xf8010000, 00:24:54:85:e7:4e, XID 04c00000 IRQ 42
[ 1.040897] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.043605] ath9k 0000:02:00.0: setting latency timer to 64
[ 1.095154] ath: EEPROM regdomain: 0x65
[ 1.095159] ath: EEPROM indicates we should expect a direct regpair map
[ 1.095166] ath: Country alpha2 being used: 00
[ 1.095170] ath: Regpair used: 0x65
[ 1.097497] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 1.099226] Registered led device: ath9k-phy0
[ 1.099244] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8120000, irq=16
[ 1.102213] console [netcon0] enabled
[ 1.104922] netconsole: network logging started
[ 1.108139] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.110834] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.110916] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.113642] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.113651] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.116348] drivers/usb/core/inode.c: creating file 'devices'
[ 1.116359] drivers/usb/core/inode.c: creating file '001'
[ 1.116555] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.119492] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 1.119502] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 1.119536] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.122412] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.125206] ehci_hcd 0000:00:1d.7: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 1.129099] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.129106] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 1.129145] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[ 1.131956] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.135838] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.141028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.143825] usb usb1: default language 0x0409
[ 1.143840] usb usb1: udev 1, busnum 1, minor = 0
[ 1.143846] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.146606] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.149405] usb usb1: Product: EHCI Host Controller
[ 1.152144] usb usb1: Manufacturer: Linux 3.0.1 ehci_hcd
[ 1.154883] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.157861] usb usb1: usb_probe_device
[ 1.157870] usb usb1: configuration #1 chosen from 1 choice
[ 1.157889] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.158046] kworker/u:2 used greatest stack depth: 6976 bytes left
[ 1.160499] ata1.00: ATA-8: Hitachi HTS545016B9A300, PBBOC66G, max UDMA/133
[ 1.160508] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.166480] ata1.00: configured for UDMA/133
[ 1.166760] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54501 PBBO PQ: 0 ANSI: 5
[ 1.167533] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.167733] sd 0:0:0:0: [sda] Write Protect is off
[ 1.167742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.167834] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.180464] hub 1-0:1.0: usb_probe_interface
[ 1.180473] hub 1-0:1.0: usb_probe_interface - got id
[ 1.180481] hub 1-0:1.0: USB hub found
[ 1.181683] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.186332] hub 1-0:1.0: 8 ports detected
[ 1.189074] hub 1-0:1.0: standalone hub
[ 1.189080] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.189085] hub 1-0:1.0: individual port over-current protection
[ 1.189091] hub 1-0:1.0: power on to power good time: 20ms
[ 1.189103] hub 1-0:1.0: local power source is good
[ 1.189109] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.189179] drivers/usb/core/inode.c: creating file '001'
[ 1.189401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.192188] ohci_hcd: block sizes: ed 64 td 64
[ 1.192352] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.195227] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.198031] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.198040] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.200731] drivers/usb/core/inode.c: creating file '002'
[ 1.200953] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.203663] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.206293] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.206301] uhci_hcd 0000:00:1d.0: Performing full reset
[ 1.206345] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.209110] usb usb2: default language 0x0409
[ 1.209127] usb usb2: udev 1, busnum 2, minor = 128
[ 1.209133] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.211765] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.214396] usb usb2: Product: UHCI Host Controller
[ 1.216988] usb usb2: Manufacturer: Linux 3.0.1 uhci_hcd
[ 1.219573] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.220932] sda: sda1 sda2 sda3 sda4
[ 1.225414] usb usb2: usb_probe_device
[ 1.225426] usb usb2: configuration #1 chosen from 1 choice
[ 1.225453] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.225686] hub 2-0:1.0: usb_probe_interface
[ 1.225695] hub 2-0:1.0: usb_probe_interface - got id
[ 1.225703] hub 2-0:1.0: USB hub found
[ 1.226393] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.231026] hub 2-0:1.0: 2 ports detected
[ 1.233580] hub 2-0:1.0: standalone hub
[ 1.233585] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.233590] hub 2-0:1.0: individual port over-current protection
[ 1.233596] hub 2-0:1.0: power on to power good time: 2ms
[ 1.233608] hub 2-0:1.0: local power source is good
[ 1.233614] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.233661] drivers/usb/core/inode.c: creating file '001'
[ 1.233737] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 1.233779] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.236443] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.236451] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.239042] drivers/usb/core/inode.c: creating file '003'
[ 1.239264] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.242134] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.244961] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.244967] uhci_hcd 0000:00:1d.1: Performing full reset
[ 1.245042] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.247918] usb usb3: default language 0x0409
[ 1.247934] usb usb3: udev 1, busnum 3, minor = 256
[ 1.247940] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.250746] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.253542] usb usb3: Product: UHCI Host Controller
[ 1.256302] usb usb3: Manufacturer: Linux 3.0.1 uhci_hcd
[ 1.259021] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.261909] usb usb3: usb_probe_device
[ 1.261917] usb usb3: configuration #1 chosen from 1 choice
[ 1.261937] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.262112] hub 3-0:1.0: usb_probe_interface
[ 1.262118] hub 3-0:1.0: usb_probe_interface - got id
[ 1.262123] hub 3-0:1.0: USB hub found
[ 1.264748] hub 3-0:1.0: 2 ports detected
[ 1.267288] hub 3-0:1.0: standalone hub
[ 1.267294] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.267299] hub 3-0:1.0: individual port over-current protection
[ 1.267304] hub 3-0:1.0: power on to power good time: 2ms
[ 1.267316] hub 3-0:1.0: local power source is good
[ 1.267322] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.267359] drivers/usb/core/inode.c: creating file '001'
[ 1.267430] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 1.267487] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 1.270066] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.270075] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.272622] drivers/usb/core/inode.c: creating file '004'
[ 1.272835] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.275232] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.277553] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.277558] uhci_hcd 0000:00:1d.2: Performing full reset
[ 1.277610] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
[ 1.279993] usb usb4: default language 0x0409
[ 1.280026] usb usb4: udev 1, busnum 4, minor = 384
[ 1.280032] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.282374] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.284709] usb usb4: Product: UHCI Host Controller
[ 1.287017] usb usb4: Manufacturer: Linux 3.0.1 uhci_hcd
[ 1.289327] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.291671] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001403 0 ACK POWER sig=k CSC CONNECT
[ 1.291680] hub 1-0:1.0: port 7: status 0501 change 0001
[ 1.291697] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.291705] hub 1-0:1.0: port 8: status 0501 change 0001
[ 1.291964] usb usb4: usb_probe_device
[ 1.291972] usb usb4: configuration #1 chosen from 1 choice
[ 1.291992] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.292190] hub 4-0:1.0: usb_probe_interface
[ 1.292197] hub 4-0:1.0: usb_probe_interface - got id
[ 1.292202] hub 4-0:1.0: USB hub found
[ 1.294488] hub 4-0:1.0: 2 ports detected
[ 1.296705] hub 4-0:1.0: standalone hub
[ 1.296710] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.296715] hub 4-0:1.0: individual port over-current protection
[ 1.296720] hub 4-0:1.0: power on to power good time: 2ms
[ 1.296732] hub 4-0:1.0: local power source is good
[ 1.296737] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.296775] drivers/usb/core/inode.c: creating file '001'
[ 1.296839] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 1.296878] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.299178] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.299187] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.301469] drivers/usb/core/inode.c: creating file '005'
[ 1.301678] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.304028] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.306315] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.306321] uhci_hcd 0000:00:1d.3: Performing full reset
[ 1.306354] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.308734] usb usb5: default language 0x0409
[ 1.308750] usb usb5: udev 1, busnum 5, minor = 512
[ 1.308756] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.311125] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.313496] usb usb5: Product: UHCI Host Controller
[ 1.315811] usb usb5: Manufacturer: Linux 3.0.1 uhci_hcd
[ 1.318121] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.320648] usb usb5: usb_probe_device
[ 1.320656] usb usb5: configuration #1 chosen from 1 choice
[ 1.320675] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.320836] hub 5-0:1.0: usb_probe_interface
[ 1.320842] hub 5-0:1.0: usb_probe_interface - got id
[ 1.320847] hub 5-0:1.0: USB hub found
[ 1.323135] hub 5-0:1.0: 2 ports detected
[ 1.325383] hub 5-0:1.0: standalone hub
[ 1.325388] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.325393] hub 5-0:1.0: individual port over-current protection
[ 1.325399] hub 5-0:1.0: power on to power good time: 2ms
[ 1.325410] hub 5-0:1.0: local power source is good
[ 1.325416] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.325462] drivers/usb/core/inode.c: creating file '001'
[ 1.325536] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[ 1.325844] usbcore: registered new interface driver usblp
[ 1.328109] Initializing USB Mass Storage driver...
[ 1.330538] usbcore: registered new interface driver usb-storage
[ 1.332820] USB Mass Storage support registered.
[ 1.335131] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.335309] usbcore: registered new interface driver libusual
[ 1.338147] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.343138] i8042: Detected active multiplexing controller, rev 1.1
[ 1.347382] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.350036] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.352694] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.355338] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.357898] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.360743] mousedev: PS/2 mouse device common for all mice
[ 1.364444] rtc_cmos 00:08: RTC can wake from S4
[ 1.367136] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.367255] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.369553] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.372051] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.375381] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.379042] cpuidle: using governor ladder
[ 1.383373] cpuidle: using governor menu
[ 1.385758] EFI Variables Facility v0.08 2004-May-17
[ 1.391072] hub 1-0:1.0: state 7 ports 8 chg 0180 evt 0000
[ 1.391100] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
[ 1.391120] ehci_hcd 0000:00:1d.7: port 7 low speed --> companion
[ 1.391549] usbcore: registered new interface driver usbhid
[ 1.394174] usbhid: USB HID core driver
[ 1.398460] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.401305] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 1.401355] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1.404292] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.415928] hda_codec: ALC269: BIOS auto-probing.
[ 1.423216] ALSA device list:
[ 1.425895] #0: HDA Intel at 0xf0440000 irq 43
[ 1.428779] Netfilter messages via NETLINK v0.30.
[ 1.431515] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.434480] uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00
[ 1.434496] hub 5-0:1.0: port 1: status 0301 change 0001
[ 1.434517] uhci_hcd 0000:00:1d.3: port 2 portsc 0082,00
[ 1.435041] ctnetlink v0.93: registering with nfnetlink.
[ 1.438836] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.441541] TCP cubic registered
[ 1.444107] Initializing XFRM netlink socket
[ 1.444149] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 1.444198] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
[ 1.447595] NET: Registered protocol family 10
[ 1.452915] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.455958] IPv6 over IPv4 tunneling driver
[ 1.460499] NET: Registered protocol family 17
[ 1.462937] can: controller area network core (rev 20090105 abi
[ 1.465463] NET: Registered protocol family 29
[ 1.467955] Registering the dns_resolver key type
[ 1.470504] Using IPI No-Shortcut mode
[ 1.473580] PM: Hibernation image not present or could not be loaded.
[ 1.473611] registered taskstats version 1
[ 1.477317] Magic number: 11:90:680
[ 1.495374] ehci_hcd 0000:00:1d.7: port 8 high speed
[ 1.495403] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.546113] usb 1-8: new high speed USB device number 3 using ehci_hcd
[ 1.600375] ehci_hcd 0000:00:1d.7: port 8 high speed
[ 1.600403] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.677034] usb 1-8: skipped 1 descriptor after configuration
[ 1.677044] usb 1-8: skipped 5 descriptors after interface
[ 1.677054] usb 1-8: skipped 1 descriptor after endpoint
[ 1.677062] usb 1-8: skipped 7 descriptors after interface
[ 1.677414] usb 1-8: default language 0x0409
[ 1.678305] usb 1-8: udev 3, busnum 1, minor = 2
[ 1.678313] usb 1-8: New USB device found, idVendor=0ac8, idProduct=c33f
[ 1.680990] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.683632] usb 1-8: Product: WebCam SCB-0340N
[ 1.686226] usb 1-8: Manufacturer: Namuga.
[ 1.689050] usb 1-8: usb_probe_device
[ 1.689062] usb 1-8: configuration #1 chosen from 1 choice
[ 1.689315] usb 1-8: adding 1-8:1.0 (config #1, interface 0)
[ 1.690283] usb 1-8: adding 1-8:1.1 (config #1, interface 1)
[ 1.690468] drivers/usb/core/inode.c: creating file '003'
[ 1.690523] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
[ 1.690540] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.690547] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 1.690562] hub 5-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
[ 1.792097] usb 5-1: new low speed USB device number 2 using uhci_hcd
[ 1.936828] usb 5-1: skipped 1 descriptor after interface
[ 1.941809] usb 5-1: default language 0x0409
[ 1.950823] usb 5-1: udev 2, busnum 5, minor = 513
[ 1.950838] usb 5-1: New USB device found, idVendor=1bcf, idProduct=0007
[ 1.953734] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.956295] usb 5-1: Product: USB Optical Mouse
[ 1.959168] usb 5-1: usb_probe_device
[ 1.959177] usb 5-1: configuration #1 chosen from 1 choice
[ 1.961855] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 1.962196] usbhid 5-1:1.0: usb_probe_interface
[ 1.962204] usbhid 5-1:1.0: usb_probe_interface - got id
[ 1.982631] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input6
[ 1.985884] usbhid 5-1:1.0: looking for a minor, starting at 96
[ 1.986250] generic-usb 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.3-1/input0
[ 1.991694] drivers/usb/core/inode.c: creating file '002'
[ 2.370445] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[ 2.414491] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 2.420399] md: Waiting for all devices to be available before autodetect
[ 2.423548] md: If you don't use raid, use raid=noautodetect
[ 2.427287] md: Autodetecting RAID arrays.
[ 2.430156] md: Scanned 0 and added 0 devices.
[ 2.432976] md: autorun ...
[ 2.435744] md: ... autorun DONE.
[ 2.454067] usb usb2: suspend_rh (auto-stop)
[ 2.454108] usb usb3: suspend_rh (auto-stop)
[ 2.454144] usb usb4: suspend_rh (auto-stop)
[ 2.454651] EXT3-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[ 2.462445] EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[ 2.505537] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.508464] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[ 2.511414] Freeing unused kernel memory: 452k freed
[ 2.514746] Write protecting the kernel text: 6764k
[ 2.517741] Write protecting the kernel read-only data: 2380k
[ 3.552282] cat used greatest stack depth: 6292 bytes left
[ 3.826240] init-early.sh used greatest stack depth: 6008 bytes left
[ 5.613353] udev[1144]: starting version 164
[ 7.384898] udevd used greatest stack depth: 6000 bytes left
[ 8.834068] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 8.929822] runscript.sh used greatest stack depth: 5932 bytes left
[ 9.084934] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.637714] find used greatest stack depth: 5900 bytes left
[ 9.809523] dmesg used greatest stack depth: 5832 bytes left
[ 10.240096] r8169 0000:03:00.0: eth0: link down
[ 10.240111] r8169 0000:03:00.0: eth0: link down
[ 10.240575] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.970685] r8169 0000:03:00.0: eth0: link up
[ 11.971205] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.504823] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k
[ 39.910060] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 112 us
[ 55.535789] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 55.782845] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 73.414789] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 112 us
[ 92.002103] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 112 us
[ 122.360917] nautilus used greatest stack depth: 5588 bytes left
[ 148.728804] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 112 us
[ 165.514343] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 112 us
[ 1573.302301] sed used greatest stack depth: 5512 bytes left

zenon · 25.09.2011 17:33:56

zenon
Пользователь
Неактивен

Откуда: Волгоград
Зарегистрирован: 04.05.2010
Сообщений: 8,794
Репутация : [ 315 | 3 ]

-regent-, чтобы все полотно не выводить делай так:

Консоль:

$ dmesg | grep ath9k

История показывает, что во всем новом обычно кроется какой-то подвох.
Классическая ошибка, которую совершают проектировщики
абсолютно надежных систем, - недооценка изобретательности клинических идиотов.

-regent- · 25.09.2011 17:37:30

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Хорошо, учту)

-regent- · 25.09.2011 17:38:47

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

В таком случае результат такой:

Консоль:

[ 1.053783] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.056490] ath9k 0000:02:00.0: setting latency timer to 64
[ 1.110473] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 1.112209] Registered led device: ath9k-phy0

-regent- · 25.09.2011 17:40:55

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Lupo Alberto пишет:

-regent- пишет:
Что же делать, друзья?
Правильно собирать ядро.
P.S.
Команда
Консоль:

modprobe ath9k

выполняется?
Виден ли загруженный модуль?
Консоль:

lsmod | grep ath9

Нет, ни на то ни на другое никакой реакции... Что же я включить в ядре забыл??? Вроде перелопатил весь конфиг...

zenon · 25.09.2011 17:45:50

zenon
Пользователь
Неактивен

Откуда: Волгоград
Зарегистрирован: 04.05.2010
Сообщений: 8,794
Репутация : [ 315 | 3 ]

Если на команду # modprobe ath9k - никакой реакции - то все Ок, вот у меня например этого модуля нет:

Консоль:

# modprobe ath9k
FATAL: Module ath9k not found.

История показывает, что во всем новом обычно кроется какой-то подвох.
Классическая ошибка, которую совершают проектировщики
абсолютно надежных систем, - недооценка изобретательности клинических идиотов.

-regent- · 25.09.2011 17:52:04

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

А! Понял. Ну хорошо) Но карта-то не работает... Почему же так?..

Lupo Alberto · 25.09.2011 17:53:42

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

-regent- пишет:

Нет, ни на то ни на другое никакой реакции... Что же я включить в ядре забыл??? Вроде перелопатил весь конфиг...

Покажите

Консоль:

lsmod

Консоль:

cat /etc/udev/rules.d/70-persistent-net.rules

Консоль:

uname -r

Консоль:

find /lib/modules/ -name 'ath9*'

Был, был и весь вышел...

-regent- · 25.09.2011 17:59:03

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

В lsmod пусто...

Консоль:

Module Size Used by

cat /etc/udev/rules.d/70-persistent-net.rules:

+ открыть спойлер

# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x10ec:0x8136 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:24:54:85:e7:4e", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x168c:0x002b (ath9k)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="f0:7b:cb:75:2e:3b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"

uname -r:

Консоль:

3.0.1

find /lib/modules/ -name 'ath9*' никакой реакции.

Lupo Alberto · 25.09.2011 18:02:03

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

-regent- пишет:

В lsmod пусто...

Подробно опишите свой порядок пересборки ядра. А вообще каталог /lib/modules/3.0.1/ у вас есть?

Был, был и весь вышел...

-regent- · 25.09.2011 18:05:55

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Да, каталог есть. Причем даже не пустой)

Извините, не понял вопроса... Расписать, что я включал в ядро? Или просто по какому алгоритму собирал?

zenon · 25.09.2011 18:12:09

zenon
Пользователь
Неактивен

Откуда: Волгоград
Зарегистрирован: 04.05.2010
Сообщений: 8,794
Репутация : [ 315 | 3 ]

Чтой-то я не пойму ничего, по хэндбуку пробовал? http://www.gentoo.org/doc/ru/handbook/h … amp;chap=4
Вроде модуль загружен, в /etc/udev/rules.d/70-persistent-net.rules - wlan0 присутствует, мне кажется просто настроить надо в соответствии с net.example?

История показывает, что во всем новом обычно кроется какой-то подвох.
Классическая ошибка, которую совершают проектировщики
абсолютно надежных систем, - недооценка изобретательности клинических идиотов.

-regent- · 25.09.2011 18:15:30

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Да, пробывал... Правда, еще с прежним ядром. Извините, если я бред несу, но там вроде про настройку wpa_suplicant, а у меня wicd стоит... Или wicd работает на основе wpa_suplicant?

-regent- · 25.09.2011 18:21:30

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Нет, попробовал еще раз по хендбуку - результат прежний... Причем, что странно, WPA Suplicant Administration GUI карточку не видит (пустой список у пункта Adapter)...

zenon · 25.09.2011 18:33:00

zenon
Пользователь
Неактивен

Откуда: Волгоград
Зарегистрирован: 04.05.2010
Сообщений: 8,794
Репутация : [ 315 | 3 ]

wlan0 настроить надо в соответствии с net.example.

ы. /usr/share/doc/openrc-НОМЕР_ВЕРСИИ/net.example.bz2

История показывает, что во всем новом обычно кроется какой-то подвох.
Классическая ошибка, которую совершают проектировщики
абсолютно надежных систем, - недооценка изобретательности клинических идиотов.

Lupo Alberto · 25.09.2011 19:03:30

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

newzenon пишет:

wlan0 настроить надо в соответствии с net.example.

Если используется wicd, все настройки подключения к сети, в том числе и wifi, настраиваются с её помощью.
Стоит убедиться, что сервис wicd добавлен в уровень запуска default.
Раньше одним из требований было также, чтобы в /etc/init.d не было ссылок с именем интерфейса (net.wlan0 в данном случае) на net.lo. И, соответственно, не должно быть /etc/init.d/net.wan0 в загрузке.

P.S. Покажите на всякий случай вывод команды

Консоль:

grep rc_hotplug /etc/rc.conf | grep -v '^#'

Был, был и весь вышел...

-regent- · 25.09.2011 19:25:44

-regent-
Пользователь
Неактивен

Откуда: Санкт-Петербург
Зарегистрирован: 06.12.2010
Сообщений: 123
Репутация : [ 0 | 0 ]

Показал бы, но нет никакого результата... Тоже ничего не происходит.

Уважаемые посетители!

Настройка WI-FI (Страница 2 из 3)

Сообщений с 31 по 60 из 80

31 Ответ от -regent- 23.09.2011 17:41:11

32 Ответ от -regent- 23.09.2011 17:45:12

33 Ответ от Lupo Alberto 23.09.2011 17:50:07

34 Ответ от -regent- 23.09.2011 17:54:28

35 Ответ от -regent- 23.09.2011 18:09:16

36 Ответ от -regent- 23.09.2011 19:12:50

37 Ответ от Lupo Alberto 23.09.2011 19:48:41

38 Ответ от -regent- 25.09.2011 14:19:28

39 Ответ от -regent- 25.09.2011 14:23:13

40 Ответ от -regent- 25.09.2011 14:54:45

41 Ответ от Lupo Alberto 25.09.2011 16:17:26

42 Ответ от Lupo Alberto 25.09.2011 16:21:34

43 Ответ от -regent- 25.09.2011 16:28:38

44 Ответ от -regent- 25.09.2011 16:29:59

45 Ответ от zenon 25.09.2011 17:33:56

46 Ответ от -regent- 25.09.2011 17:37:30

47 Ответ от -regent- 25.09.2011 17:38:47

48 Ответ от -regent- 25.09.2011 17:40:55

49 Ответ от zenon 25.09.2011 17:45:50

50 Ответ от -regent- 25.09.2011 17:52:04

51 Ответ от Lupo Alberto 25.09.2011 17:53:42

52 Ответ от -regent- 25.09.2011 17:59:03

53 Ответ от Lupo Alberto 25.09.2011 18:02:03

54 Ответ от -regent- 25.09.2011 18:05:55

55 Ответ от zenon 25.09.2011 18:12:09

56 Ответ от -regent- 25.09.2011 18:15:30

57 Ответ от -regent- 25.09.2011 18:21:30

58 Ответ от zenon 25.09.2011 18:33:00 (25.09.2011 18:34:32 отредактировано zenon)

59 Ответ от Lupo Alberto 25.09.2011 19:03:30

60 Ответ от -regent- 25.09.2011 19:25:44

Сообщений с 31 по 60 из 80

Просматривают тему: 1 гость, 0 пользователей