* WARNING: you are stopping a boot service
* Setting system clock using the hardware clock [Local Time] ...
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --debug option to see the details of our search for an access method.
* Failed to set the system clock
При загрузке тоже заметил:
Часы спешат на 4 часа вперед
# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
# Greenwich Mean Time). If that clock is set to the local time, then
# set CLOCK to "local". Note that if you dual boot with Windows, then
# you should set it to "local".
clock="local"
# If you want to set the Hardware Clock to the current System Time
# (software clock) during shutdown, then say "YES" here.
# You normally don't need to do this if you run a ntp daemon.
clock_systohc="NO"
# If you want to set the system time to the current hardware clock
# during bootup, then say "YES" here. You do not need this if you are
# running a modern kernel with CONFIG_RTC_HCTOSYS set to y.
# Also, be aware that if you set this to "NO", the system time will
# never be saved to the hardware clock unless you set
# clock_systohc="YES" above.
clock_hctosys="YES"
# If you wish to pass any other arguments to hwclock during bootup,
# you may do so here. Alpha users may wish to use --arc or --srm here.
clock_args=""
