• Зарегистрирован: 15.03.2010
  • Сообщений: 5
  • Репутация : [ 0 | 0 ]

Добрый день, возникла такая проблема - поставил на нетбук с флэшки debian netinstal с базовой системой...проблема в том что система загружается около 10 минут... особенно долго приходится ждать после надписи INIT: version 2.86 booting ... сгачала думал что подвис бук, даже индикатор винта не моргал, но через некоторое время продолжилась загрузка (минут через 5-7  ac  ) так же пару минут уходит на загрузку /script/local-bottom и /script/init-bottom ... Подскажите куда копать, я пока начинающий. :cool:

2 Ответ от Nightwolf_ng

  • Зарегистрирован: 20.02.2010
  • Сообщений: 1,545
  • Репутация : [ 15 | 0 ]

Копать видимо в логи. Выкладывать их сюда, будем курить вместе.
/var/log/messages
/var/log/dmesg

3 Ответ от xasan_marabu

  • Зарегистрирован: 15.03.2010
  • Сообщений: 5
  • Репутация : [ 0 | 0 ]

/var/log/messages

Mar 15 11:56:30 localhost kernel: imklog 3.18.6, log source = /proc/kmsg started.
Mar 15 11:56:30 localhost kernel: [    0.000000] Initializing cgroup subsys cpuset
Mar 15 11:56:30 localhost kernel: [    0.000000] Initializing cgroup subsys cpu
Mar 15 11:56:30 localhost kernel: [    0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sat Dec 26 09:01:51 UTC 2009
Mar 15 11:56:30 localhost kernel: [    0.000000] BIOS-provided physical RAM map:
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 000000007f6d0000 - 000000007f6e2000 (ACPI data)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 000000007f6e2000 - 000000007f6e3000 (ACPI NVS)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Mar 15 11:56:30 localhost kernel: [    0.000000] 1142MB HIGHMEM available.
Mar 15 11:56:30 localhost kernel: [    0.000000] 896MB LOWMEM available.
Mar 15 11:56:30 localhost kernel: [    0.000000] found SMP MP-table at [c00f7d50] 000f7d50
Mar 15 11:56:30 localhost kernel: [    0.000000] Zone PFN ranges:
Mar 15 11:56:30 localhost kernel: [    0.000000]   DMA             0 ->     4096
Mar 15 11:56:30 localhost kernel: [    0.000000]   Normal       4096 ->   229376
Mar 15 11:56:30 localhost kernel: [    0.000000]   HighMem    229376 ->   521936
Mar 15 11:56:30 localhost kernel: [    0.000000] Movable zone start PFN for each node
Mar 15 11:56:30 localhost kernel: [    0.000000] early_node_map[1] active PFN ranges
Mar 15 11:56:30 localhost kernel: [    0.000000]     0:        0 ->   521936
Mar 15 11:56:30 localhost kernel: [    0.000000] DMI present.
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: RSDP 000F7C70, 0024 (r2 LENOVO)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: XSDT 7F6DAAB3, 0074 (r1 LENOVO CB-01     6040000  LTP        0)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: FACP 7F6E1C3A, 00F4 (r3 INTEL  CALISTGA  6040000 ALAN        1)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: DSDT 7F6DBBE0, 5FE6 (r1 LENOVO CB-01     6040000 MSFT  3000000)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: FACS 7F6E2FC0, 0040
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: HPET 7F6E1D2E, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: MCFG 7F6E1D66, 003C (r1 INTEL  CALISTGA  6040000 LOHR       5A)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: TCPA 7F6E1DA2, 0032 (r1 PTLTD  CALISTGA  6040000  PTL        1)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: TMOR 7F6E1DD4, 0026 (r1 PTLTD            6040000 PTL         3)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: SLIC 7F6E1DFA, 0176 (r1 LENOVO CB-01     6040000 LNVO        1)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: APIC 7F6E1F70, 0068 (r1 PTLTD       APIC    6040000  LTP        0)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: BOOT 7F6E1FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: SSDT 7F6DB9D6, 020A (r1 SataRe SataAhci     1000 INTL 20050624)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: SSDT 7F6DAB27, 04F6 (r2  PmRef    CpuPm     3000 INTL 20050624)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar 15 11:56:30 localhost kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 15 11:56:30 localhost kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Mar 15 11:56:30 localhost kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Mar 15 11:56:30 localhost kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Mar 15 11:56:30 localhost kernel: [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Mar 15 11:56:30 localhost kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 15 11:56:30 localhost kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
Mar 15 11:56:30 localhost kernel: [    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
Mar 15 11:56:30 localhost kernel: [    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
Mar 15 11:56:30 localhost kernel: [    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Mar 15 11:56:30 localhost kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Mar 15 11:56:30 localhost kernel: [    0.000000] PERCPU: Allocating 37992 bytes of per cpu data
Mar 15 11:56:30 localhost kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517858
Mar 15 11:56:30 localhost kernel: [    0.000000] Kernel command line: root=/dev/sda3 ro 
Mar 15 11:56:30 localhost kernel: [    0.000000] Enabling fast FPU save and restore... done.
Mar 15 11:56:30 localhost kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Mar 15 11:56:30 localhost kernel: [    0.000000] Initializing CPU#0
Mar 15 11:56:30 localhost kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Mar 15 11:56:30 localhost kernel: [    0.000000] Extended CMOS year: 2000
Mar 15 11:56:30 localhost kernel: [    0.000000] Detected 1596.038 MHz processor.
Mar 15 11:56:30 localhost kernel: [    0.004000] Console: colour VGA+ 80x25
Mar 15 11:56:30 localhost kernel: [    0.004000] console [tty0] enabled
Mar 15 11:56:30 localhost kernel: [    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 15 11:56:30 localhost kernel: [    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 15 11:56:30 localhost kernel: [    0.004000] Memory: 2060004k/2087744k available (1770k kernel code, 26528k reserved, 750k data, 244k init, 1170240k highmem)
Mar 15 11:56:30 localhost kernel: [    0.004000] virtual kernel memory layout:
Mar 15 11:56:30 localhost kernel: [    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
Mar 15 11:56:30 localhost kernel: [    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Mar 15 11:56:30 localhost kernel: [    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Mar 15 11:56:30 localhost kernel: [    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Mar 15 11:56:30 localhost kernel: [    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
Mar 15 11:56:30 localhost kernel: [    0.004000]       .data : 0xc02baba9 - 0xc0376620   ( 750 kB)
Mar 15 11:56:30 localhost kernel: [    0.004000]       .text : 0xc0100000 - 0xc02baba9   (1770 kB)
Mar 15 11:56:30 localhost kernel: [    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Mar 15 11:56:30 localhost kernel: [    0.083910] Calibrating delay using timer specific routine.. 3198.44 BogoMIPS (lpj=6396897)
Mar 15 11:56:30 localhost kernel: [    0.084005] Security Framework initialized
Mar 15 11:56:30 localhost kernel: [    0.084005] SELinux:  Disabled at boot.
Mar 15 11:56:30 localhost kernel: [    0.084005] Capability LSM initialized
Mar 15 11:56:30 localhost kernel: [    0.084005] Mount-cache hash table entries: 512
Mar 15 11:56:30 localhost kernel: [    0.084005] Initializing cgroup subsys ns
Mar 15 11:56:30 localhost kernel: [    0.084005] Initializing cgroup subsys cpuacct
Mar 15 11:56:30 localhost kernel: [    0.084005] Initializing cgroup subsys devices
Mar 15 11:56:30 localhost kernel: [    0.084005] CPU: L1 I cache: 32K, L1 D cache: 24K
Mar 15 11:56:30 localhost kernel: [    0.084005] CPU: L2 cache: 512K
Mar 15 11:56:30 localhost kernel: [    0.084005] CPU: Physical Processor ID: 0
Mar 15 11:56:30 localhost kernel: [    0.084005] Intel machine check architecture supported.
Mar 15 11:56:30 localhost kernel: [    0.084005] Intel machine check reporting enabled on CPU#0.
Mar 15 11:56:30 localhost kernel: [    0.084005] using mwait in idle threads.
Mar 15 11:56:30 localhost kernel: [    0.084005] Checking 'hlt' instruction... OK.
Mar 15 11:56:30 localhost kernel: [    0.100006] ACPI: Core revision 20080321
Mar 15 11:56:30 localhost kernel: [    0.116007] ENABLING IO-APIC IRQs
Mar 15 11:56:30 localhost kernel: [    0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 15 11:56:30 localhost kernel: [    0.155811] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Mar 15 11:56:30 localhost kernel: [    0.156009] Booting processor 1/1 ip 6000
Mar 15 11:56:30 localhost kernel: [    0.164010] Initializing CPU#1
Mar 15 11:56:30 localhost kernel: [    0.164010] Calibrating delay using timer specific routine.. 3191.94 BogoMIPS (lpj=6383890)
Mar 15 11:56:30 localhost kernel: [    0.164010] CPU: L1 I cache: 32K, L1 D cache: 24K
Mar 15 11:56:30 localhost kernel: [    0.164010] CPU: L2 cache: 512K
Mar 15 11:56:30 localhost kernel: [    0.164010] CPU: Physical Processor ID: 0
Mar 15 11:56:30 localhost kernel: [    0.164010] Intel machine check architecture supported.
Mar 15 11:56:30 localhost kernel: [    0.164010] Intel machine check reporting enabled on CPU#1.
Mar 15 11:56:30 localhost kernel: [    0.243962] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Mar 15 11:56:30 localhost kernel: [    0.244015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Mar 15 11:56:30 localhost kernel: [    0.248015] Brought up 2 CPUs
Mar 15 11:56:30 localhost kernel: [    0.248015] Total of 2 processors activated (6390.39 BogoMIPS).
Mar 15 11:56:30 localhost kernel: [    0.248015] net_namespace: 660 bytes
Mar 15 11:56:30 localhost kernel: [    0.248015] Booting paravirtualized kernel on bare hardware
Mar 15 11:56:30 localhost kernel: [    0.248015] NET: Registered protocol family 16
Mar 15 11:56:30 localhost kernel: [    0.248015] ACPI: bus type pci registered
Mar 15 11:56:30 localhost kernel: [    0.248015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Mar 15 11:56:30 localhost kernel: [    0.248015] PCI: MCFG area at e0000000 reserved in E820
Mar 15 11:56:30 localhost kernel: [    0.248015] PCI: Using MMCONFIG for extended config space
Mar 15 11:56:30 localhost kernel: [    0.248015] PCI: Using configuration type 1 for base access
Mar 15 11:56:30 localhost kernel: [    0.248015] Setting up standard PCI resources
Mar 15 11:56:30 localhost kernel: [    0.260016] ACPI: BIOS _OSI(Linux) query ignored
Mar 15 11:56:30 localhost kernel: [    0.260016] ACPI: DMI System Vendor: LENOVO
Mar 15 11:56:30 localhost kernel: [    0.260016] ACPI: DMI Product Name: 20021,2959
Mar 15 11:56:30 localhost kernel: [    0.260016] ACPI: DMI Product Version: Lenovo Ideapad S12
Mar 15 11:56:30 localhost kernel: [    0.260016] ACPI: DMI Board Name: MoutCook
Mar 15 11:56:30 localhost kernel: [    0.260016] ACPI: DMI BIOS Vendor: LENOVO
Mar 15 11:56:30 localhost kernel: [    0.260016] ACPI: DMI BIOS Date: 07/17/2009
Mar 15 11:56:30 localhost kernel: [    0.260016] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
Mar 15 11:56:30 localhost kernel: [    0.260016] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
Mar 15 11:56:30 localhost kernel: [    0.263591] ACPI: Interpreter enabled
Mar 15 11:56:30 localhost kernel: [    0.263673] ACPI: (supports S0 S3 S4 S5)
Mar 15 11:56:30 localhost kernel: [    0.263952] ACPI: Using IOAPIC for interrupt routing
Mar 15 11:56:30 localhost kernel: [    0.266323] ACPI: EC: non-query interrupt received, switching to interrupt mode
Mar 15 11:56:30 localhost kernel: [    0.322371] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Mar 15 11:56:30 localhost kernel: [    0.322371] ACPI: EC: driver started in interrupt mode
Mar 15 11:56:30 localhost kernel: [    0.322371] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 15 11:56:30 localhost kernel: [    0.323452] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Mar 15 11:56:30 localhost kernel: [    0.323556] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
Mar 15 11:56:30 localhost kernel: [    0.326185] PCI: Transparent bridge - 0000:00:1e.0
Mar 15 11:56:30 localhost kernel: [    0.347467] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
Mar 15 11:56:30 localhost kernel: [    0.347467] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
Mar 15 11:56:30 localhost kernel: [    0.347467] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
Mar 15 11:56:30 localhost kernel: [    0.347467] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
Mar 15 11:56:30 localhost kernel: [    0.347467] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
Mar 15 11:56:30 localhost kernel: [    0.347467] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
Mar 15 11:56:30 localhost kernel: [    0.347467] ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
Mar 15 11:56:30 localhost kernel: [    0.347932] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
Mar 15 11:56:30 localhost kernel: [    0.351467] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 15 11:56:30 localhost kernel: [    0.351467] pnp: PnP ACPI init
Mar 15 11:56:30 localhost kernel: [    0.351467] ACPI: bus type pnp registered
Mar 15 11:56:30 localhost kernel: [    0.355467] pnp: PnP ACPI: found 10 devices
Mar 15 11:56:30 localhost kernel: [    0.355467] ACPI: ACPI bus type pnp unregistered
Mar 15 11:56:30 localhost kernel: [    0.355467] PnPBIOS: Disabled by ACPI PNP
Mar 15 11:56:30 localhost kernel: [    0.359467] PCI: Using ACPI for IRQ routing
Mar 15 11:56:30 localhost kernel: [    0.361979] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Mar 15 11:56:30 localhost kernel: [    0.362259] hpet0: 3 64-bit timers, 14318180 Hz
Mar 15 11:56:30 localhost kernel: [    0.363451] ACPI: RTC can wake from S4
Mar 15 11:56:30 localhost kernel: [    0.365960] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.366075] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.366186] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.367417] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.367519] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.367620] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.367721] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.367823] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.367934] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.368042] system 00:06: ioport range 0x800-0x80f has been reserved
Mar 15 11:56:30 localhost kernel: [    0.368123] system 00:06: ioport range 0x1000-0x107f has been reserved
Mar 15 11:56:30 localhost kernel: [    0.368203] system 00:06: ioport range 0x1180-0x11bf has been reserved
Mar 15 11:56:30 localhost kernel: [    0.368284] system 00:06: iomem range 0xff800000-0xff800fff could not be reserved
Mar 15 11:56:30 localhost kernel: [    0.401127] PCI: Bridge: 0000:00:1c.0
Mar 15 11:56:30 localhost kernel: [    0.401206]   IO window: 2000-2fff
Mar 15 11:56:30 localhost kernel: [    0.401284]   MEM window: 0xf6000000-0xf7ffffff
Mar 15 11:56:30 localhost kernel: [    0.401361]   PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
Mar 15 11:56:30 localhost kernel: [    0.401449] PCI: Bridge: 0000:00:1c.1
Mar 15 11:56:30 localhost kernel: [    0.401522]   IO window: 3000-3fff
Mar 15 11:56:30 localhost kernel: [    0.401600]   MEM window: 0xf8000000-0xf9ffffff
Mar 15 11:56:30 localhost kernel: [    0.401678]   PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
Mar 15 11:56:30 localhost kernel: [    0.401763] PCI: Bridge: 0000:00:1c.2
Mar 15 11:56:30 localhost kernel: [    0.401835]   IO window: disabled.
Mar 15 11:56:30 localhost kernel: [    0.401911]   MEM window: disabled.
Mar 15 11:56:30 localhost kernel: [    0.401986]   PREFETCH window: disabled.
Mar 15 11:56:30 localhost kernel: [    0.402065] PCI: Bridge: 0000:00:1c.3
Mar 15 11:56:30 localhost kernel: [    0.402138]   IO window: 4000-4fff
Mar 15 11:56:30 localhost kernel: [    0.402213]   MEM window: 0xfa000000-0xfbffffff
Mar 15 11:56:30 localhost kernel: [    0.402292]   PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff
Mar 15 11:56:30 localhost kernel: [    0.402376] PCI: Bridge: 0000:00:1e.0
Mar 15 11:56:30 localhost kernel: [    0.402448]   IO window: disabled.
Mar 15 11:56:30 localhost kernel: [    0.403636]   MEM window: disabled.
Mar 15 11:56:30 localhost kernel: [    0.403636]   PREFETCH window: disabled.
Mar 15 11:56:30 localhost kernel: [    0.403636] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 15 11:56:30 localhost kernel: [    0.403636] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
Mar 15 11:56:30 localhost kernel: [    0.403636] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Mar 15 11:56:30 localhost kernel: [    0.403636] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Mar 15 11:56:30 localhost kernel: [    0.403636] NET: Registered protocol family 2
Mar 15 11:56:30 localhost kernel: [    0.415976] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 15 11:56:30 localhost kernel: [    0.416582] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Mar 15 11:56:30 localhost kernel: [    0.417602] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Mar 15 11:56:30 localhost kernel: [    0.418174] TCP: Hash tables configured (established 131072 bind 65536)
Mar 15 11:56:30 localhost kernel: [    0.418257] TCP reno registered
Mar 15 11:56:30 localhost kernel: [    0.420075] NET: Registered protocol family 1
Mar 15 11:56:30 localhost kernel: [    0.420363] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
Mar 15 11:56:30 localhost kernel: [    0.787435]  it is
Mar 15 11:56:30 localhost kernel: [    1.187445] Freeing initrd memory: 6041k freed
Mar 15 11:56:30 localhost kernel: [    1.191386] Simple Boot Flag at 0x36 set to 0x1
Mar 15 11:56:30 localhost kernel: [    1.191439] audit: initializing netlink socket (disabled)
Mar 15 11:56:30 localhost kernel: [    1.191439] type=2000 audit(1268654054.176:1): initialized
Mar 15 11:56:30 localhost kernel: [    1.191439] highmem bounce pool size: 64 pages
Mar 15 11:56:30 localhost kernel: [    1.191439] Total HugeTLB memory allocated, 0
Mar 15 11:56:30 localhost kernel: [    1.191439] VFS: Disk quotas dquot_6.5.1
Mar 15 11:56:30 localhost kernel: [    1.191439] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 15 11:56:30 localhost kernel: [    1.191439] msgmni has been set to 1751
Mar 15 11:56:30 localhost kernel: [    1.191439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 15 11:56:30 localhost kernel: [    1.191439] io scheduler noop registered
Mar 15 11:56:30 localhost kernel: [    1.191439] io scheduler anticipatory registered
Mar 15 11:56:30 localhost kernel: [    1.191439] io scheduler deadline registered
Mar 15 11:56:30 localhost kernel: [    1.191439] io scheduler cfq registered (default)
Mar 15 11:56:30 localhost kernel: [    1.192053] assign_interrupt_mode Found MSI capability
Mar 15 11:56:30 localhost kernel: [    1.192053] assign_interrupt_mode Found MSI capability
Mar 15 11:56:30 localhost kernel: [    1.195841] assign_interrupt_mode Found MSI capability
Mar 15 11:56:30 localhost kernel: [    1.195841] assign_interrupt_mode Found MSI capability
Mar 15 11:56:30 localhost kernel: [    1.195841] isapnp: Scanning for PnP cards...
Mar 15 11:56:30 localhost kernel: [    1.549156] isapnp: No Plug & Play device found
Mar 15 11:56:30 localhost kernel: [    1.549195] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Mar 15 11:56:30 localhost kernel: [    1.559841] brd: module loaded
Mar 15 11:56:30 localhost kernel: [    1.559841] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Mar 15 11:56:30 localhost kernel: [    1.572981] i8042.c: Detected active multiplexing controller, rev 1.1.
Mar 15 11:56:30 localhost kernel: [    1.580329] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 15 11:56:30 localhost kernel: [    1.580329] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Mar 15 11:56:30 localhost kernel: [    1.580329] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Mar 15 11:56:30 localhost kernel: [    1.580329] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Mar 15 11:56:30 localhost kernel: [    1.580329] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Mar 15 11:56:30 localhost kernel: [    1.580329] mice: PS/2 mouse device common for all mice
Mar 15 11:56:30 localhost kernel: [    1.583872] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Mar 15 11:56:30 localhost kernel: [    1.583872] rtc0: alarms up to one month, y3k
Mar 15 11:56:30 localhost kernel: [    1.583872] cpuidle: using governor ladder
Mar 15 11:56:30 localhost kernel: [    1.583872] cpuidle: using governor menu
Mar 15 11:56:30 localhost kernel: [    1.583953] No iBFT detected.
Mar 15 11:56:30 localhost kernel: [    1.583953] TCP cubic registered
Mar 15 11:56:30 localhost kernel: [    1.583953] NET: Registered protocol family 17
Mar 15 11:56:30 localhost kernel: [    1.583953] Using IPI No-Shortcut mode
Mar 15 11:56:30 localhost kernel: [    1.583953] registered taskstats version 1
Mar 15 11:56:30 localhost kernel: [    1.583953] rtc_cmos 00:07: setting system clock to 2010-03-15 11:54:15 UTC (1268654055)
Mar 15 11:56:30 localhost kernel: [    1.583953] Freeing unused kernel memory: 244k freed
Mar 15 11:56:30 localhost kernel: [    1.775448] ACPI: SSDT 7F6DB6BD, 0245 (r2  PmRef  Cpu0Ist     3000 INTL 20050624)
Mar 15 11:56:30 localhost kernel: [    1.775448] ACPI: SSDT 7F6DB01D, 061B (r2  PmRef  Cpu0Cst     3001 INTL 20050624)
Mar 15 11:56:30 localhost kernel: [    1.779448] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Mar 15 11:56:30 localhost kernel: [    1.779448] ACPI: ACPI0007:00 is registered as cooling_device0
Mar 15 11:56:30 localhost kernel: [    1.779448] ACPI: SSDT 7F6DB902, 00D4 (r2  PmRef  Cpu1Ist     3000 INTL 20050624)
Mar 15 11:56:30 localhost kernel: [    1.779448] ACPI: SSDT 7F6DB638, 0085 (r2  PmRef  Cpu1Cst     3000 INTL 20050624)
Mar 15 11:56:30 localhost kernel: [    1.783505] Marking TSC unstable due to: TSC halts in idle.
Mar 15 11:56:30 localhost kernel: [    1.785452] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Mar 15 11:56:30 localhost kernel: [    1.787501] ACPI: ACPI0007:01 is registered as cooling_device1
Mar 15 11:56:30 localhost kernel: [    1.865918] input: AT Translated Set 2 keyboard as /class/input/input0
Mar 15 11:56:30 localhost kernel: [    2.001300] ACPI: LNXTHERM:01 is registered as thermal_zone0
Mar 15 11:56:30 localhost kernel: [    2.015918] Clocksource tsc unstable (delta = -135154603 ns)
Mar 15 11:56:30 localhost kernel: [    2.254528] ACPI: Thermal Zone [TZS0] (58 C)
Mar 15 11:56:30 localhost kernel: [    2.261868] ACPI: LNXTHERM:02 is registered as thermal_zone1
Mar 15 11:56:30 localhost kernel: [    2.263394] ACPI: Thermal Zone [TZS1] (58 C)
Mar 15 11:56:30 localhost kernel: [    2.961913] tg3.c:v3.92.1 (June 9, 2008)
Mar 15 11:56:30 localhost kernel: [    2.962086] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 15 11:56:30 localhost kernel: [    3.120953] usbcore: registered new interface driver usbfs
Mar 15 11:56:30 localhost kernel: [    3.121135] usbcore: registered new interface driver hub
Mar 15 11:56:30 localhost kernel: [    3.123320] usbcore: registered new device driver usb
Mar 15 11:56:30 localhost kernel: [    3.134426] USB Universal Host Controller Interface driver v3.0
Mar 15 11:56:30 localhost kernel: [    3.224953] No dock devices found.
Mar 15 11:56:30 localhost kernel: [    3.274175] SCSI subsystem initialized
Mar 15 11:56:30 localhost kernel: [    3.320953] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1f:16:2a:15:4e
Mar 15 11:56:30 localhost kernel: [    3.320953] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
Mar 15 11:56:30 localhost kernel: [    3.320953] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Mar 15 11:56:30 localhost kernel: [    3.320953] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Mar 15 11:56:30 localhost kernel: [    3.321129] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.321434] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Mar 15 11:56:30 localhost kernel: [    3.321587] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
Mar 15 11:56:30 localhost kernel: [    3.321832] usb usb1: configuration #1 chosen from 1 choice
Mar 15 11:56:30 localhost kernel: [    3.321832] hub 1-0:1.0: USB hub found
Mar 15 11:56:30 localhost kernel: [    3.321832] hub 1-0:1.0: 2 ports detected
Mar 15 11:56:30 localhost kernel: [    3.425442] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Mar 15 11:56:30 localhost kernel: [    3.425541] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 15 11:56:30 localhost kernel: [    3.425650] usb usb1: Product: UHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.425735] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Mar 15 11:56:30 localhost kernel: [    3.425823] usb usb1: SerialNumber: 0000:00:1d.0
Mar 15 11:56:30 localhost kernel: [    3.425856] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
Mar 15 11:56:30 localhost kernel: [    3.425856] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.425856] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Mar 15 11:56:30 localhost kernel: [    3.425856] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
Mar 15 11:56:30 localhost kernel: [    3.425856] usb usb2: configuration #1 chosen from 1 choice
Mar 15 11:56:30 localhost kernel: [    3.425856] hub 2-0:1.0: USB hub found
Mar 15 11:56:30 localhost kernel: [    3.425856] hub 2-0:1.0: 2 ports detected
Mar 15 11:56:30 localhost kernel: [    3.530231] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Mar 15 11:56:30 localhost kernel: [    3.530231] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 15 11:56:30 localhost kernel: [    3.530231] usb usb2: Product: UHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.530231] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Mar 15 11:56:30 localhost kernel: [    3.530231] usb usb2: SerialNumber: 0000:00:1d.1
Mar 15 11:56:30 localhost kernel: [    3.530300] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Mar 15 11:56:30 localhost kernel: [    3.530465] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.530592] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Mar 15 11:56:30 localhost kernel: [    3.530735] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
Mar 15 11:56:30 localhost kernel: [    3.530963] usb usb3: configuration #1 chosen from 1 choice
Mar 15 11:56:30 localhost kernel: [    3.531095] hub 3-0:1.0: USB hub found
Mar 15 11:56:30 localhost kernel: [    3.531121] hub 3-0:1.0: 2 ports detected
Mar 15 11:56:30 localhost kernel: [    3.634741] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Mar 15 11:56:30 localhost kernel: [    3.634741] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 15 11:56:30 localhost kernel: [    3.634741] usb usb3: Product: UHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.634750] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Mar 15 11:56:30 localhost kernel: [    3.634830] usb usb3: SerialNumber: 0000:00:1d.2
Mar 15 11:56:30 localhost kernel: [    3.634994] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
Mar 15 11:56:30 localhost kernel: [    3.635160] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.635288] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Mar 15 11:56:30 localhost kernel: [    3.635433] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
Mar 15 11:56:30 localhost kernel: [    3.635664] usb usb4: configuration #1 chosen from 1 choice
Mar 15 11:56:30 localhost kernel: [    3.635797] hub 4-0:1.0: USB hub found
Mar 15 11:56:30 localhost kernel: [    3.635883] hub 4-0:1.0: 2 ports detected
Mar 15 11:56:30 localhost kernel: [    3.738742] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Mar 15 11:56:30 localhost kernel: [    3.738742] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 15 11:56:30 localhost kernel: [    3.738742] usb usb4: Product: UHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.738742] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Mar 15 11:56:30 localhost kernel: [    3.738742] usb usb4: SerialNumber: 0000:00:1d.3
Mar 15 11:56:30 localhost kernel: [    3.738952] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Mar 15 11:56:30 localhost kernel: [    3.739125] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.739252] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Mar 15 11:56:30 localhost kernel: [    3.743626] ehci_hcd 0000:00:1d.7: debug port 1
Mar 15 11:56:30 localhost kernel: [    3.743626] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc344000
Mar 15 11:56:30 localhost kernel: [    3.756870] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar 15 11:56:30 localhost kernel: [    3.757245] usb usb5: configuration #1 chosen from 1 choice
Mar 15 11:56:30 localhost kernel: [    3.757383] hub 5-0:1.0: USB hub found
Mar 15 11:56:30 localhost kernel: [    3.757468] hub 5-0:1.0: 8 ports detected
Mar 15 11:56:30 localhost kernel: [    3.862686] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Mar 15 11:56:30 localhost kernel: [    3.862686] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 15 11:56:30 localhost kernel: [    3.862686] usb usb5: Product: EHCI Host Controller
Mar 15 11:56:30 localhost kernel: [    3.862686] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
Mar 15 11:56:30 localhost kernel: [    3.862686] usb usb5: SerialNumber: 0000:00:1d.7
Mar 15 11:56:30 localhost kernel: [    3.863614] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
Mar 15 11:56:30 localhost kernel: [    4.105573] usb 5-7: new high speed USB device using ehci_hcd and address 2
Mar 15 11:56:30 localhost kernel: [    4.417050] usb 5-7: configuration #1 chosen from 1 choice
Mar 15 11:56:30 localhost kernel: [    4.445564] usb 5-7: New USB device found, idVendor=5986, idProduct=0241
Mar 15 11:56:30 localhost kernel: [    4.445657] usb 5-7: New USB device strings: Mfr=3, Product=1, SerialNumber=0
Mar 15 11:56:30 localhost kernel: [    4.445744] usb 5-7: Product: Lenovo EasyCamera
Mar 15 11:56:30 localhost kernel: [    4.445823] usb 5-7: Manufacturer: BISON Corporation
Mar 15 11:56:30 localhost kernel: [    4.870140] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
Mar 15 11:56:30 localhost kernel: [    4.870267] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
Mar 15 11:56:30 localhost kernel: [    4.873157] scsi0 : ahci
Mar 15 11:56:30 localhost kernel: [    4.873157] scsi1 : ahci
Mar 15 11:56:30 localhost kernel: [    4.873157] scsi2 : ahci
Mar 15 11:56:30 localhost kernel: [    4.873157] scsi3 : ahci
Mar 15 11:56:30 localhost kernel: [    4.873157] ata1: SATA max UDMA/133 abar m1024@0xfc344400 port 0xfc344500 irq 219
Mar 15 11:56:30 localhost kernel: [    4.873157] ata2: DUMMY
Mar 15 11:56:30 localhost kernel: [    4.873157] ata3: SATA max UDMA/133 abar m1024@0xfc344400 port 0xfc344600 irq 219
Mar 15 11:56:30 localhost kernel: [    4.873157] ata4: DUMMY
Mar 15 11:56:30 localhost kernel: [    5.190241] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 15 11:56:30 localhost kernel: [    5.219969] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Mar 15 11:56:30 localhost kernel: [    5.269273] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
Mar 15 11:56:30 localhost kernel: [    5.269273] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
Mar 15 11:56:30 localhost kernel: [    5.318843] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Mar 15 11:56:30 localhost kernel: [    5.321571] ata1.00: configured for UDMA/133
Mar 15 11:56:30 localhost kernel: [    5.660867] ata3: SATA link down (SStatus 0 SControl 300)
Mar 15 11:56:30 localhost kernel: [    5.676684] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
Mar 15 11:56:30 localhost kernel: [    5.691424] Uniform Multi-Platform E-IDE driver
Mar 15 11:56:30 localhost kernel: [    5.691424] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 15 11:56:30 localhost kernel: [    5.695366] ICH7: IDE controller (0x8086:0x27df rev 0x02) at  PCI slot 0000:00:1f.1
Mar 15 11:56:30 localhost kernel: [    5.695428] ACPI: PCI Interrupt 0000:00:1f.1[b] -> GSI 19 (level, low) -> IRQ 19
Mar 15 11:56:30 localhost kernel: [    5.695428] ICH7: not 100% native mode: will probe irqs later
Mar 15 11:56:30 localhost kernel: [    5.695428] ICH7: IDE port disabled
Mar 15 11:56:30 localhost kernel: [    5.695428]     ide0: BM-DMA at 0x1810-0x1817
Mar 15 11:56:30 localhost kernel: [    5.730147] Driver 'sd' needs updating - please use bus_type methods
Mar 15 11:56:30 localhost kernel: [    5.731970] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
Mar 15 11:56:30 localhost kernel: [    5.732122] sd 0:0:0:0: [sda] Write Protect is off
Mar 15 11:56:30 localhost kernel: [    5.734154] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 15 11:56:30 localhost kernel: [    5.734162] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
Mar 15 11:56:30 localhost kernel: [    5.734415] sd 0:0:0:0: [sda] Write Protect is off
Mar 15 11:56:30 localhost kernel: [    5.734447] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 15 11:56:30 localhost kernel: [    5.734572]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
Mar 15 11:56:30 localhost kernel: [    5.905709] sd 0:0:0:0: [sda] Attached SCSI disk
Mar 15 11:56:30 localhost kernel: [    6.263749] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 15 11:56:30 localhost kernel: [    7.597587] PM: Starting manual resume from disk
Mar 15 11:56:30 localhost kernel: [    8.066171] kjournald starting.  Commit interval 5 seconds
Mar 15 11:56:30 localhost kernel: [    8.066417] EXT3-fs: mounted filesystem with ordered data mode.
Mar 15 11:56:30 localhost kernel: [   88.101165] CE: hpet increasing min_delta_ns to 15000 nsec
Mar 15 11:56:30 localhost kernel: [   90.912485] udevd version 125 started
Mar 15 11:56:30 localhost kernel: [   97.903993] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
Mar 15 11:56:30 localhost kernel: [   97.935998] hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
Mar 15 11:56:30 localhost kernel: [   98.869558] Linux video capture interface: v2.00
Mar 15 11:56:30 localhost kernel: [   98.969635] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
Mar 15 11:56:30 localhost kernel: [   98.986876] input: Lenovo EasyCamera as /class/input/input1
Mar 15 11:56:30 localhost kernel: [   99.003131] usbcore: registered new interface driver uvcvideo
Mar 15 11:56:30 localhost kernel: [   99.003226] USB Video Class driver (v0.1.0)
Mar 15 11:56:30 localhost kernel: [   99.367704] Linux agpgart interface v0.103
Mar 15 11:56:30 localhost kernel: [   99.382885] agpgart: Detected an Intel 945GME Chipset.
Mar 15 11:56:30 localhost kernel: [   99.383184] agpgart: Detected 7932K stolen memory.
Mar 15 11:56:30 localhost kernel: [   99.402001] agpgart: AGP aperture is 256M @ 0xd0000000
Mar 15 11:56:30 localhost kernel: [   99.838820] intel_rng: FWH not detected
Mar 15 11:56:30 localhost kernel: [   99.897221] input: PC Speaker as /class/input/input2
Mar 15 11:56:30 localhost kernel: [   99.942957] ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 19 (level, low) -> IRQ 19
Mar 15 11:56:30 localhost kernel: [  100.366445] input: Power Button (FF) as /class/input/input3
Mar 15 11:56:30 localhost kernel: [  100.405445] ACPI: Power Button (FF) [PWRF]
Mar 15 11:56:30 localhost kernel: [  100.405704] input: Sleep Button (CM) as /class/input/input4
Mar 15 11:56:30 localhost kernel: [  100.445264] ACPI: Sleep Button (CM) [SLPB]
Mar 15 11:56:30 localhost kernel: [  100.453929] input: Lid Switch as /class/input/input5
Mar 15 11:56:30 localhost kernel: [  100.485930] ACPI: Lid Switch [LID0]
Mar 15 11:56:30 localhost kernel: [  100.488341] ACPI: WMI: Mapper loaded
Mar 15 11:56:30 localhost kernel: [  100.645470] ACPI: device:05 is registered as cooling_device2
Mar 15 11:56:30 localhost kernel: [  100.645470] input: Video Bus as /class/input/input6
Mar 15 11:56:30 localhost kernel: [  100.658259] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000
Mar 15 11:56:30 localhost kernel: [  100.673573] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Mar 15 11:56:30 localhost kernel: [  100.713470] input: SynPS/2 Synaptics TouchPad as /class/input/input7
Mar 15 11:56:30 localhost kernel: [  101.819983] ACPI: Battery Slot [BAT0] (battery present)
Mar 15 11:56:30 localhost kernel: [  101.900185] ACPI: AC Adapter [ADP1] (on-line)
Mar 15 11:56:30 localhost kernel: [  105.608713] Adding 979924k swap on /dev/sda5.  Priority:-1 extents:1 across:979924k
Mar 15 11:56:30 localhost kernel: [  109.646334] EXT3 FS on sda3, internal journal
Mar 15 11:56:30 localhost kernel: [  110.761167] loop: module loaded
Mar 15 11:56:30 localhost kernel: [  130.160061] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
Mar 15 11:56:30 localhost kernel: [  130.160061] ReiserFS: sda6: using ordered data mode
Mar 15 11:56:30 localhost kernel: [  130.172262] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Mar 15 11:56:30 localhost kernel: [  130.173430] ReiserFS: sda6: checking transaction log (sda6)
Mar 15 11:56:30 localhost kernel: [  130.372239] ReiserFS: sda6: Using r5 hash to sort names
Mar 15 11:56:30 localhost kernel: [  131.007608] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
Mar 15 11:56:30 localhost kernel: [  131.011821] SGI XFS Quota Management subsystem
Mar 15 11:56:30 localhost kernel: [  131.276388] XFS mounting filesystem sda7
Mar 15 11:56:30 localhost kernel: [  132.478063] kjournald starting.  Commit interval 5 seconds
Mar 15 11:56:30 localhost kernel: [  132.479924] EXT3 FS on sda8, internal journal
Mar 15 11:56:30 localhost kernel: [  132.479924] EXT3-fs: mounted filesystem with ordered data mode.

4 Ответ от xasan_marabu (15.03.2010 19:35:01 отредактировано )

  • Зарегистрирован: 15.03.2010
  • Сообщений: 5
  • Репутация : [ 0 | 0 ]

/var/log/dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sat Dec 26 09:01:51 UTC 2009
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[    0.000000]  BIOS-e820: 000000007f6d0000 - 000000007f6e2000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f6e2000 - 000000007f6e3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 1142MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at [c00f7d50] 000f7d50
[    0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   521936
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   521936
[    0.000000] On node 0 totalpages: 521936
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2286 pages used for memmap
[    0.000000]   HighMem zone: 290274 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F7C70, 0024 (r2 LENOVO)
[    0.000000] ACPI: XSDT 7F6DAAB3, 0074 (r1 LENOVO CB-01     6040000  LTP        0)
[    0.000000] ACPI: FACP 7F6E1C3A, 00F4 (r3 INTEL  CALISTGA  6040000 ALAN        1)
[    0.000000] ACPI: DSDT 7F6DBBE0, 5FE6 (r1 LENOVO CB-01     6040000 MSFT  3000000)
[    0.000000] ACPI: FACS 7F6E2FC0, 0040
[    0.000000] ACPI: HPET 7F6E1D2E, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
[    0.000000] ACPI: MCFG 7F6E1D66, 003C (r1 INTEL  CALISTGA  6040000 LOHR       5A)
[    0.000000] ACPI: TCPA 7F6E1DA2, 0032 (r1 PTLTD  CALISTGA  6040000  PTL        1)
[    0.000000] ACPI: TMOR 7F6E1DD4, 0026 (r1 PTLTD            6040000 PTL         3)
[    0.000000] ACPI: SLIC 7F6E1DFA, 0176 (r1 LENOVO CB-01     6040000 LNVO        1)
[    0.000000] ACPI: APIC 7F6E1F70, 0068 (r1 PTLTD       APIC    6040000  LTP        0)
[    0.000000] ACPI: BOOT 7F6E1FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: SSDT 7F6DB9D6, 020A (r1 SataRe SataAhci     1000 INTL 20050624)
[    0.000000] ACPI: SSDT 7F6DAB27, 04F6 (r2  PmRef    CpuPm     3000 INTL 20050624)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517858
[    0.000000] Kernel command line: root=/dev/sda3 ro 
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Detected 1596.142 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 2060004k/2087744k available (1770k kernel code, 26528k reserved, 750k data, 244k init, 1170240k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
[    0.004000]       .data : 0xc02baba9 - 0xc0376620   ( 750 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02baba9   (1770 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] hpet clockevent registered
[    0.083913] Calibrating delay using timer specific routine.. 3196.78 BogoMIPS (lpj=6393562)
[    0.084005] Security Framework initialized
[    0.084005] SELinux:  Disabled at boot.
[    0.084005] Capability LSM initialized
[    0.084005] Mount-cache hash table entries: 512
[    0.084005] Initializing cgroup subsys ns
[    0.084005] Initializing cgroup subsys cpuacct
[    0.084005] Initializing cgroup subsys devices
[    0.084005] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.084005] CPU: L2 cache: 512K
[    0.084005] CPU: Physical Processor ID: 0
[    0.084005] Intel machine check architecture supported.
[    0.084005] Intel machine check reporting enabled on CPU#0.
[    0.084005] using mwait in idle threads.
[    0.084005] Checking 'hlt' instruction... OK.
[    0.100006] ACPI: Core revision 20080321
[    0.116007] ENABLING IO-APIC IRQs
[    0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.156009] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.156009] Booting processor 1/1 ip 6000
[    0.164010] Initializing CPU#1
[    0.164010] Calibrating delay using timer specific routine.. 3191.95 BogoMIPS (lpj=6383901)
[    0.164010] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.164010] CPU: L2 cache: 512K
[    0.164010] CPU: Physical Processor ID: 0
[    0.164010] Intel machine check architecture supported.
[    0.164010] Intel machine check reporting enabled on CPU#1.
[    0.243933] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.244015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.248015] Brought up 2 CPUs
[    0.248015] Total of 2 processors activated (6388.73 BogoMIPS).
[    0.248015] CPU0 attaching sched-domain:
[    0.248015]  domain 0: span 0-1
[    0.248015]   groups: 0 1
[    0.248015]   domain 1: span 0-1
[    0.248015]    groups: 0-1
[    0.248015] CPU1 attaching sched-domain:
[    0.248015]  domain 0: span 0-1
[    0.248015]   groups: 1 0
[    0.248015]   domain 1: span 0-1
[    0.248015]    groups: 0-1
[    0.248015] net_namespace: 660 bytes
[    0.248015] Booting paravirtualized kernel on bare hardware
[    0.248015] NET: Registered protocol family 16
[    0.248015] ACPI: bus type pci registered
[    0.248015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.248015] PCI: MCFG area at e0000000 reserved in E820
[    0.248015] PCI: Using MMCONFIG for extended config space
[    0.248015] PCI: Using configuration type 1 for base access
[    0.248015] Setting up standard PCI resources
[    0.256330] ACPI: EC: Look up EC in DSDT
[    0.260330] ACPI: BIOS _OSI(Linux) query ignored
[    0.260330] ACPI: DMI System Vendor: LENOVO
[    0.260330] ACPI: DMI Product Name: 20021,2959
[    0.260330] ACPI: DMI Product Version: Lenovo Ideapad S12
[    0.260330] ACPI: DMI Board Name: MoutCook
[    0.260330] ACPI: DMI BIOS Vendor: LENOVO
[    0.260330] ACPI: DMI BIOS Date: 07/17/2009
[    0.260330] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[    0.260330] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[    0.262158] ACPI: Interpreter enabled
[    0.262242] ACPI: (supports S0 S3 S4 S5)
[    0.262522] ACPI: Using IOAPIC for interrupt routing
[    0.264016] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.324135] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.324135] ACPI: EC: driver started in interrupt mode
[    0.324135] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.324135] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.324135] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.324135] PCI: Transparent bridge - 0000:00:1e.0
[    0.324135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.324767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.325024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.325273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.325521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.344136] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[    0.344136] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[    0.344136] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[    0.344136] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[    0.344136] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.344692] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.345237] ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
[    0.351667] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[    0.354107] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.354107] pnp: PnP ACPI init
[    0.354107] ACPI: bus type pnp registered
[    0.358108] pnp: PnP ACPI: found 10 devices
[    0.358108] ACPI: ACPI bus type pnp unregistered
[    0.358108] PnPBIOS: Disabled by ACPI PNP
[    0.358108] PCI: Using ACPI for IRQ routing
[    0.362438] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.362719] hpet0: 3 64-bit timers, 14318180 Hz
[    0.363913] ACPI: RTC can wake from S4
[    0.370530] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[    0.370646] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[    0.370757] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[    0.371981] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[    0.372083] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[    0.372183] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[    0.372286] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[    0.372387] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[    0.372499] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[    0.372609] system 00:06: ioport range 0x800-0x80f has been reserved
[    0.372692] system 00:06: ioport range 0x1000-0x107f has been reserved
[    0.372773] system 00:06: ioport range 0x1180-0x11bf has been reserved
[    0.372854] system 00:06: iomem range 0xff800000-0xff800fff could not be reserved
[    0.405317] PCI: Bridge: 0000:00:1c.0
[    0.405397]   IO window: 2000-2fff
[    0.405476]   MEM window: 0xf6000000-0xf7ffffff
[    0.405556]   PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
[    0.405642] PCI: Bridge: 0000:00:1c.1
[    0.405716]   IO window: 3000-3fff
[    0.405794]   MEM window: 0xf8000000-0xf9ffffff
[    0.405873]   PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
[    0.405957] PCI: Bridge: 0000:00:1c.2
[    0.406029]   IO window: disabled.
[    0.406106]   MEM window: disabled.
[    0.406180]   PREFETCH window: disabled.
[    0.406261] PCI: Bridge: 0000:00:1c.3
[    0.406335]   IO window: 4000-4fff
[    0.406413]   MEM window: 0xfa000000-0xfbffffff
[    0.406491]   PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff
[    0.406576] PCI: Bridge: 0000:00:1e.0
[    0.406648]   IO window: disabled.
[    0.406725]   MEM window: disabled.
[    0.406800]   PREFETCH window: disabled.
[    0.406917] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.407067] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.407100] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[    0.407247] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.407265] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.407265] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.407265] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[    0.407265] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.407265] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.407265] NET: Registered protocol family 2
[    0.419626] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.420235] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.421420] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.421990] TCP: Hash tables configured (established 131072 bind 65536)
[    0.422075] TCP reno registered
[    0.427904] NET: Registered protocol family 1
[    0.428201] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[    0.511603] Switched to high resolution mode on CPU 0
[    0.795360]  it is
[    1.198576] Freeing initrd memory: 6041k freed
[    1.199370] Simple Boot Flag at 0x36 set to 0x1
[    1.199606] audit: initializing netlink socket (disabled)
[    1.199606] type=2000 audit(1268674266.188:1): initialized
[    1.199606] highmem bounce pool size: 64 pages
[    1.199606] Total HugeTLB memory allocated, 0
[    1.203366] VFS: Disk quotas dquot_6.5.1
[    1.203366] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.203366] msgmni has been set to 1751
[    1.203366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.203366] io scheduler noop registered
[    1.203366] io scheduler anticipatory registered
[    1.203366] io scheduler deadline registered
[    1.203366] io scheduler cfq registered (default)
[    1.203366] pci 0000:00:02.0: Boot video device
[    1.203366] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.203366] assign_interrupt_mode Found MSI capability
[    1.203366] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.203366] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.203366] Allocate Port Service[0000:00:1c.0:pcie03]
[    1.203366] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.203366] assign_interrupt_mode Found MSI capability
[    1.203366] Allocate Port Service[0000:00:1c.1:pcie00]
[    1.203366] Allocate Port Service[0000:00:1c.1:pcie02]
[    1.203366] Allocate Port Service[0000:00:1c.1:pcie03]
[    1.203366] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.203366] assign_interrupt_mode Found MSI capability
[    1.203366] Allocate Port Service[0000:00:1c.2:pcie00]
[    1.203366] Allocate Port Service[0000:00:1c.2:pcie02]
[    1.203366] Allocate Port Service[0000:00:1c.2:pcie03]
[    1.203366] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    1.203366] assign_interrupt_mode Found MSI capability
[    1.203366] Allocate Port Service[0000:00:1c.3:pcie00]
[    1.203366] Allocate Port Service[0000:00:1c.3:pcie02]
[    1.203366] Allocate Port Service[0000:00:1c.3:pcie03]
[    1.207365] isapnp: Scanning for PnP cards...
[    1.563323] isapnp: No Plug & Play device found
[    1.571326] hpet_resources: 0xfed00000 is busy
[    1.571326] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.575326] brd: module loaded
[    1.575336] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.591317] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.599159] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.599159] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.599159] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.599159] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.599159] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.599159] mice: PS/2 mouse device common for all mice
[    1.599159] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.599159] rtc0: alarms up to one month, y3k
[    1.599159] cpuidle: using governor ladder
[    1.599159] cpuidle: using governor menu
[    1.599159] No iBFT detected.
[    1.599159] TCP cubic registered
[    1.599159] NET: Registered protocol family 17
[    1.599159] Using IPI No-Shortcut mode
[    1.603030] registered taskstats version 1
[    1.603030] rtc_cmos 00:07: setting system clock to 2010-03-15 17:31:07 UTC (1268674267)
[    1.603030] Freeing unused kernel memory: 244k freed
[    1.790591] ACPI: SSDT 7F6DB6BD, 0245 (r2  PmRef  Cpu0Ist     3000 INTL 20050624)
[    1.792710] ACPI: SSDT 7F6DB01D, 061B (r2  PmRef  Cpu0Cst     3001 INTL 20050624)
[    1.793867] Monitor-Mwait will be used to enter C-1 state
[    1.793877] Monitor-Mwait will be used to enter C-2 state
[    1.793882] Monitor-Mwait will be used to enter C-3 state
[    1.794965] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.794965] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.794965] ACPI: SSDT 7F6DB902, 00D4 (r2  PmRef  Cpu1Ist     3000 INTL 20050624)
[    1.795691] ACPI: SSDT 7F6DB638, 0085 (r2  PmRef  Cpu1Cst     3000 INTL 20050624)
[    1.798963] Marking TSC unstable due to: TSC halts in idle.
[    1.799027] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.799027] ACPI: ACPI0007:01 is registered as cooling_device1
[    1.874543] input: AT Translated Set 2 keyboard as /class/input/input0
[    2.010783] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    2.015324] Clocksource tsc unstable (delta = -179900662 ns)
[    2.268156] ACPI: Thermal Zone [TZS0] (56 C)
[    2.274498] ACPI: LNXTHERM:02 is registered as thermal_zone1
[    2.283513] ACPI: Thermal Zone [TZS1] (56 C)
[    2.595353] tg3.c:v3.92.1 (June 9, 2008)
[    2.595529] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[    2.595731] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    2.925688] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1f:16:2a:15:4e
[    2.925810] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[    2.925915] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    3.211235] usbcore: registered new interface driver usbfs
[    3.211387] usbcore: registered new interface driver hub
[    3.212094] usbcore: registered new device driver usb
[    3.216936] USB Universal Host Controller Interface driver v3.0
[    3.216936] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    3.217100] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.217110] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.217401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.217552] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    3.217844] usb usb1: configuration #1 chosen from 1 choice
[    3.217997] hub 1-0:1.0: USB hub found
[    3.218090] hub 1-0:1.0: 2 ports detected
[    3.250823] No dock devices found.
[    3.322205] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    3.322301] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.322406] usb usb1: Product: UHCI Host Controller
[    3.322486] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    3.322569] usb usb1: SerialNumber: 0000:00:1d.0
[    3.322698] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
[    3.322862] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.322871] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.323006] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.323158] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    3.323438] usb usb2: configuration #1 chosen from 1 choice
[    3.323591] hub 2-0:1.0: USB hub found
[    3.323680] hub 2-0:1.0: 2 ports detected
[    3.351151] SCSI subsystem initialized
[    3.426193] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.426287] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.426391] usb usb2: Product: UHCI Host Controller
[    3.426471] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    3.426554] usb usb2: SerialNumber: 0000:00:1d.1
[    3.426687] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.426850] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.426860] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.427000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.427151] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    3.427430] usb usb3: configuration #1 chosen from 1 choice
[    3.427584] hub 3-0:1.0: USB hub found
[    3.427674] hub 3-0:1.0: 2 ports detected
[    3.461904] libata version 3.00 loaded.
[    3.534175] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.534175] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.534175] usb usb3: Product: UHCI Host Controller
[    3.534183] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    3.534263] usb usb3: SerialNumber: 0000:00:1d.2
[    3.535904] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    3.535904] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.535904] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.535904] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.535904] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    3.535904] usb usb4: configuration #1 chosen from 1 choice
[    3.535904] hub 4-0:1.0: USB hub found
[    3.535904] hub 4-0:1.0: 2 ports detected
[    3.638138] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.638138] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.638138] usb usb4: Product: UHCI Host Controller
[    3.638138] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    3.638138] usb usb4: SerialNumber: 0000:00:1d.3
[    3.639031] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    3.639031] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.639031] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.639031] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.643031] ehci_hcd 0000:00:1d.7: debug port 1
[    3.643031] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.643031] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc344000
[    3.658487] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.658790] usb usb5: configuration #1 chosen from 1 choice
[    3.658946] hub 5-0:1.0: USB hub found
[    3.659037] hub 5-0:1.0: 8 ports detected
[    3.765123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.765212] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.765313] usb usb5: Product: EHCI Host Controller
[    3.765390] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[    3.765469] usb usb5: SerialNumber: 0000:00:1d.7
[    3.767759] ahci 0000:00:1f.2: version 3.0
[    3.767759] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
[    4.032333] usb 5-7: new high speed USB device using ehci_hcd and address 2
[    4.345715] usb 5-7: configuration #1 chosen from 1 choice
[    4.371288] usb 5-7: New USB device found, idVendor=5986, idProduct=0241
[    4.371288] usb 5-7: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    4.371288] usb 5-7: Product: Lenovo EasyCamera
[    4.371288] usb 5-7: Manufacturer: BISON Corporation
[    4.766387] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    4.766512] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    4.766610] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.770339] scsi0 : ahci
[    4.770339] scsi1 : ahci
[    4.770339] scsi2 : ahci
[    4.775853] scsi3 : ahci
[    4.775853] ata1: SATA max UDMA/133 abar m1024@0xfc344400 port 0xfc344500 irq 219
[    4.775853] ata2: DUMMY
[    4.775853] ata3: SATA max UDMA/133 abar m1024@0xfc344400 port 0xfc344600 irq 219
[    4.775853] ata4: DUMMY
[    5.090907] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.123155] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    5.179629] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[    5.179629] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.183243] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    5.187206] ata1.00: configured for UDMA/133
[    5.525868] ata3: SATA link down (SStatus 0 SControl 300)
[    5.541638] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[    5.560783] Uniform Multi-Platform E-IDE driver
[    5.560783] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    5.589796] ICH7: IDE controller (0x8086:0x27df rev 0x02) at  PCI slot 0000:00:1f.1
[    5.589796] ACPI: PCI Interrupt 0000:00:1f.1[b] -> GSI 19 (level, low) -> IRQ 19
[    5.589796] ICH7: not 100% native mode: will probe irqs later
[    5.589796] ICH7: IDE port disabled
[    5.589796]     ide0: BM-DMA at 0x1810-0x1817
[    5.589796] Probing IDE interface ide0...
[    5.668293] Driver 'sd' needs updating - please use bus_type methods
[    5.668293] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[    5.668293] sd 0:0:0:0: [sda] Write Protect is off
[    5.668293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.668293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.668293] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[    5.668293] sd 0:0:0:0: [sda] Write Protect is off
[    5.668293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.668293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.668293]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    5.789188] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.160967] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    6.748175] CE: hpet increasing min_delta_ns to 15000 nsec
[    7.052722] PM: Starting manual resume from disk
[    8.066855] kjournald starting.  Commit interval 5 seconds
[    8.066855] EXT3-fs: mounted filesystem with ordered data mode.
[  102.892483] udevd version 125 started
[  110.599842] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[  110.599842] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  110.631839] hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
[  110.872765] Linux agpgart interface v0.103
[  110.901868] agpgart: Detected an Intel 945GME Chipset.
[  110.902167] agpgart: Detected 7932K stolen memory.
[  110.919839] agpgart: AGP aperture is 256M @ 0xd0000000
[  111.217868] input: Power Button (FF) as /class/input/input1
[  111.257190] ACPI: Power Button (FF) [PWRF]
[  111.257190] input: Sleep Button (CM) as /class/input/input2
[  111.281968] ACPI: Sleep Button (CM) [SLPB]
[  111.282223] input: Lid Switch as /class/input/input3
[  111.308058] ACPI: Lid Switch [LID0]
[  111.377748] ACPI: WMI: Mapper loaded
[  111.977204] ACPI: device:05 is registered as cooling_device2
[  111.977883] input: Video Bus as /class/input/input4
[  112.035564] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  112.808842] ACPI: AC Adapter [ADP1] (on-line)
[  113.005756] intel_rng: FWH not detected
[  113.166105] input: PC Speaker as /class/input/input5
[  113.220268] Linux video capture interface: v2.00
[  113.248269] ACPI: Battery Slot [BAT0] (battery present)
[  113.270935] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
[  113.275297] input: Lenovo EasyCamera as /class/input/input6
[  113.306681] usbcore: registered new interface driver uvcvideo
[  113.306778] USB Video Class driver (v0.1.0)
[  113.471792] ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 19 (level, low) -> IRQ 19
[  114.165345] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000
[  114.214257] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[  118.980026] Adding 979924k swap on /dev/sda5.  Priority:-1 extents:1 across:979924k
[  122.959997] EXT3 FS on sda3, internal journal
[  123.669787] loop: module loaded
[  145.169873] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
[  145.169873] ReiserFS: sda6: using ordered data mode
[  145.181138] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[  145.181921] ReiserFS: sda6: checking transaction log (sda6)
[  145.380862] ReiserFS: sda6: Using r5 hash to sort names
[  146.268281] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[  146.271727] SGI XFS Quota Management subsystem
[  146.585259] XFS mounting filesystem sda7
[  147.472415] Ending clean XFS mount for filesystem: sda7
[  147.890643] kjournald starting.  Commit interval 5 seconds
[  147.892722] EXT3 FS on sda8, internal journal
[  147.892722] EXT3-fs: mounted filesystem with ordered data mode.

на зарубежных форумах нашёл упоминание похожей проблемы... советуют либо переустановить инитскрипт (я сделал и безрезультатно) или собрать с gcc 4.2 ... пока не пробовал, буду пробовать если не подскажите ничего другого...

5 Ответ от Mozil

  • Mozil
  • Посетитель
  • Неактивен
  • Зарегистрирован: 15.03.2010
  • Сообщений: 5
  • Репутация : [ 0 | 0 ]

А еще такое бывает: надо дописать (явно)  имя хоста и IP сети в  /etc/hosts, например -
10.0.0.30  devel devel.domain

look at the  /etc/hosts
Mozil

6 Ответ от xasan_marabu (16.03.2010 11:35:53 отредактировано xasan_marabu)

  • Зарегистрирован: 15.03.2010
  • Сообщений: 5
  • Репутация : [ 0 | 0 ]

эмм...а какое это имеет отношение к сабжу? на сколько я  знаю, в hosts обязательно наличие "петли"...

7 Ответ от Mozil (16.03.2010 14:45:15 отредактировано )

  • Mozil
  • Посетитель
  • Неактивен
  • Зарегистрирован: 15.03.2010
  • Сообщений: 5
  • Репутация : [ 0 | 0 ]

Бывает в инстоле гдюк. У вас же Нетбук.  Ему нужно четкое имя для ресолвера.
Разумеется, если вы в сети, ну хотя бы лупбэк в хостах должен быть:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
Ну и IPv6. Если поддержка не отключена, он тоже будет думать:
: : 1            localhost localhost.localdomain localhost6 localhost6.localdomain6

Чё, вам долго глянуть? Под рутом, конечно.
Mozil

Кстати, MC у вас должен долго открываться, если нет хостов.
Mozil

8 Ответ от xasan_marabu

  • Зарегистрирован: 15.03.2010
  • Сообщений: 5
  • Репутация : [ 0 | 0 ]

Тему можно закрывать, спасибо. Проблема оказалась в нетинсталовском образе с которого устанавливалась базовая система. Поставил с с жёсткого, из полного образа  - загрузка пошла норм.