1 Тема от Dee

  • Dee
  • Посетитель
  • Неактивен
  • Зарегистрирован: 09.11.2011
  • Сообщений: 8
  • Репутация : [ 0 | 0 ]

Здравствуйте! Недавно столкнулся с тем, что при копировании файлов с виндовой(XP...) машины по сети на линукс (CentOS) - а точнее файлы образов акрониса, они повреждаются (контрольная сумма не совпадает). Установлен Centos 5.6_x86 (рейд1 из 2х SATA500 гб самсунгов-одиноаковых). Винты заведомо целые, проверял. Шлейфы тоже в норме, т.к в Пк стоят вообщето 4 винта, т.е md3 и md4 - оба зеркала из 2х винтов каждый. Файлы бьются на обоих рейдах..(. Что может быть проблемой, какие данные необходимо еще указать? Пробовал переписать с 1го массива на другой - итог тот же- контр. сумма не совпадает((

Дополнение: Проверил винты на повреждения - их нет, тестил локально копирование, мелкие файлы при копировании не бьются, с увеличением размера вероятность повышается, как то раз скопировал 350 мб и не побился, затем повторил с аналогичным размером - увы.. опять 25.. Очень прошу откликнуться, надеюсь на ваше понимание.

2 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

Рейд софтовый?
В mdadm всё нормально с винтами?

Чем контрольную сумму проверяешь?

Сайт Vascom

3 Ответ от Dee

  • Dee
  • Посетитель
  • Неактивен
  • Зарегистрирован: 09.11.2011
  • Сообщений: 8
  • Репутация : [ 0 | 0 ]

Vascom,  да софтовый, контрльную проверяю командой md5sum. В mdadm все ок, актив синк итд..

4 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

Процессор и память разогнаны?
Проверь память мемтестом.

Сайт Vascom

5 Ответ от i2ks

  • i2ks
  • Участник Форума
  • Неактивен
  • Зарегистрирован: 20.02.2010
  • Сообщений: 6,983
  • Репутация : [ 101 | 1 ]

Dee, по сети? cifs, scp, ftp? если файл поместить в архив, такая же ситуация?

It is good day to die ...
MS Windows 10
Заметки о главном...

6 Ответ от Dee

  • Dee
  • Посетитель
  • Неактивен
  • Зарегистрирован: 09.11.2011
  • Сообщений: 8
  • Репутация : [ 0 | 0 ]

Vascom, нет, разгона нет, память проверить смогу только завтра.
i2ks, бьются любые файлы, не зависит от расширения, локально тоже самое, пробовал копировать внутри этого же рейда..

7 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

По моему выглядит как аппаратная проблема с процессором или памятью.
В dmesg нет ошибок?

Сайт Vascom

8 Ответ от beza2000

  • beza2000
  • Посетитель
  • Неактивен
  • Зарегистрирован: 07.06.2011
  • Сообщений: 3
  • Репутация : [ 0 | 0 ]

Так по какому протоколу копируются файлы?

9 Ответ от Dee

  • Dee
  • Посетитель
  • Неактивен
  • Зарегистрирован: 09.11.2011
  • Сообщений: 8
  • Репутация : [ 0 | 0 ]

Vascom, я особо не разбираюсь в логах, как тут вложить файли, возможно это сделать? В том то и дело, заодно хотелось бы понять как распозновать ошибки в dmesg..

10 Ответ от Dee

  • Dee
  • Посетитель
  • Неактивен
  • Зарегистрирован: 09.11.2011
  • Сообщений: 8
  • Репутация : [ 0 | 0 ]

beza2000, даже не знаю как ответить, копировать пробовал через mc, консоль, когда по сети поднята самба..

11 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

Ну ошибки распознаются по слову error (может быть в любом регистре). Логи тут можно прикладывать или выкладывать их в тег code например.

Сайт Vascom

12 Ответ от i2ks (09.11.2011 12:34:05 отредактировано i2ks)

  • i2ks
  • Участник Форума
  • Неактивен
  • Зарегистрирован: 20.02.2010
  • Сообщений: 6,983
  • Репутация : [ 101 | 1 ]

Dee, тогда необходимо смотреть на вывод команды iostat и sar, возможно есnь ошибки чтения/записи на диски.

It is good day to die ...
MS Windows 10
Заметки о главном...

13 Ответ от Dee (09.11.2011 14:07:27 отредактировано Dee)

  • Dee
  • Посетитель
  • Неактивен
  • Зарегистрирован: 09.11.2011
  • Сообщений: 8
  • Репутация : [ 0 | 0 ]

Vascom, спасибо 
вот dmesg

+ открыть спойлер
Linux version 2.6.18-238.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jan 13 15:51:15 EST 2011
Command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
 BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
 BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
 BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.4 present.
ACPI: RSDP (v002 ACPIAM                                ) @ 0x00000000000fbc10
ACPI: XSDT (v001 A_M_I_ OEMXSDT  0x12000816 MSFT 0x00000097) @ 0x000000007ff80100
ACPI: FADT (v003 A_M_I_ OEMFACP  0x12000816 MSFT 0x00000097) @ 0x000000007ff80290
ACPI: MADT (v001 A_M_I_ OEMAPIC  0x12000816 MSFT 0x00000097) @ 0x000000007ff80390
ACPI: MCFG (v001 A_M_I_ OEMMCFG  0x12000816 MSFT 0x00000097) @ 0x000000007ff80400
ACPI: OEMB (v001 A_M_I_ AMI_OEM  0x12000816 MSFT 0x00000097) @ 0x000000007ff8e040
ACPI: HPET (v001 A_M_I_ OEMHPET  0x12000816 MSFT 0x00000097) @ 0x000000007ff88f80
ACPI: OSFR (v001 A_M_I_ OEMOSFR  0x12000816 MSFT 0x00000097) @ 0x000000007ff88fc0
ACPI: DSDT (v001  A0916 A0916041 0x00000041 INTL 0x20060113) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-000000007ff80000
Bootmem setup node 0 0000000000000000-000000007ff80000
On node 0 totalpages: 515389
  DMA zone: 2435 pages, LIFO batch:0
  DMA32 zone: 512954 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009d000 - 000000000009e000
Nosave address range: 000000000009e000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
Built 1 zonelists.  Total pages: 515389
Kernel command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
ACPI: DMAR not present
Memory: 1924332k/2096640k available (2592k kernel code, 171848k reserved, 1649k data, 224k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.45 BogoMIPS (lpj=2672727)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 16.704 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5345.41 BogoMIPS (lpj=2672705)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Duo CPU     E7300  @ 2.66GHz stepping 06
Brought up 2 CPUs
CPU#0: NMI watchdog performance counter calibration - 120->140
CPU#1: NMI watchdog performance counter calibration - 60->80
NMI watchdog testing PASSED.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2672.727 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=10
checking if image is initramfs... it is
Freeing initrd memory: 2619k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
pnp: 00:06: ioport range 0x290-0x297 has been reserved
pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
pnp: 00:07: iomem range 0xffa00000-0xffafffff has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: fe900000-fe9fffff
  PREFETCH window 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window 0x00000000fdf00000-0x00000000fdffffff
PCI: Bridge: 0000:00:1c.4
  IO window: e000-efff
  MEM window: feb00000-febfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: d000-dfff
  MEM window: fea00000-feafffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1320763533.436:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key C099FB4D84A418B6
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1c.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 519k
input: AT Translated Set 2 keyboard as /class/input/input0
GSI 18 sharing vector 0xE1 and IRQ 18
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 225, io mem 0xfe8ffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
GSI 19 sharing vector 0xE9 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfe8ff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 20 sharing vector 0x32 and IRQ 20
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 50, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 225, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
GSI 21 sharing vector 0x3A and IRQ 21
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 58, io base 0x0000b400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000b480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
md: raid1 personality registered for level 1
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
GSI 22 sharing vector 0x42 and IRQ 22
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 22 (level, low) -> IRQ 66
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 66
ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 66
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
  Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
  Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
sd 1:0:0:0: Attached scsi disk sdb
ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 22 (level, low) -> IRQ 66
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 66
ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 66
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
  Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
 sdc: sdc1
sd 2:0:0:0: Attached scsi disk sdc
  Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
 sdd: sdd1
sd 3:0:0:0: Attached scsi disk sdd
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 169
ata6: DUMMY
ata5.00: ATAPI: Optiarc DVD RW AD-5200A, 1.09, max UDMA/66
ata5.00: configured for UDMA/66
  Vendor: Optiarc   Model: DVD RW AD-5200A   Rev: 1.09
  Type:   CD-ROM                             ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdd1 ...
md:  adding sdd1 ...
md:  adding sdc1 ...
md: sdb5 has different UUID to sdd1
md: sdb3 has different UUID to sdd1
md: sdb2 has different UUID to sdd1
md: sdb1 has different UUID to sdd1
md: sda5 has different UUID to sdd1
md: sda3 has different UUID to sdd1
md: sda2 has different UUID to sdd1
md: sda1 has different UUID to sdd1
md: created md4
md: bind<sdc1>
md: bind<sdd1>
md: running: <sdd1><sdc1>
raid1: raid set md4 active with 2 out of 2 mirrors
md: considering sdb5 ...
md:  adding sdb5 ...
md: sdb3 has different UUID to sdb5
md: sdb2 has different UUID to sdb5
md: sdb1 has different UUID to sdb5
md:  adding sda5 ...
md: sda3 has different UUID to sdb5
md: sda2 has different UUID to sdb5
md: sda1 has different UUID to sdb5
md: created md3
md: bind<sda5>
md: bind<sdb5>
md: running: <sdb5><sda5>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering sdb3 ...
md:  adding sdb3 ...
md: sdb2 has different UUID to sdb3
md: sdb1 has different UUID to sdb3
md:  adding sda3 ...
md: sda2 has different UUID to sdb3
md: sda1 has different UUID to sdb3
md: created md1
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb2 ...
md:  adding sdb2 ...
md: sdb1 has different UUID to sdb2
md:  adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md2
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md2 active with 2 out of 2 mirrors
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1320763558.763:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input2
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
scsi 4:0:0:0: Attached scsi generic sg4 type 5
sky2 driver version 1.22
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.22 addr 0xfeafc000 irq 177 Yukon-2 EC Ultra rev 3
sky2 eth0: addr 00:1f:c6:1e:c8:d3
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 225
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: ALC883: BIOS auto-probing.
ACPI: PCI Interrupt 0000:01:00.1[b] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:01:00.1 to 64
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
floppy0: no floppy controllers found
work still pending
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
EXT3 FS on md2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020024k swap on /dev/md1.  Priority:-1 extents:1 across:1020024k

А тут  messages - не полный (ограничение на размер, ниже продолжение лога)

+ открыть спойлер
Nov  8 08:07:59 fileserv2 syslogd 1.4.1: restart.
Nov  8 08:08:00 fileserv2 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov  8 08:08:00 fileserv2 kernel: Linux version 2.6.18-238.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jan 13 15:51:15 EST 2011
Nov  8 08:08:00 fileserv2 kernel: Command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov  8 08:08:00 fileserv2 kernel: BIOS-provided physical RAM map:
Nov  8 08:08:00 fileserv2 kernel:  BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
Nov  8 08:08:00 fileserv2 kernel:  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Nov  8 08:08:00 fileserv2 kernel:  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov  8 08:08:00 fileserv2 kernel:  BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
Nov  8 08:08:00 fileserv2 kernel:  BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
Nov  8 08:08:00 fileserv2 kernel:  BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
Nov  8 08:08:00 fileserv2 kernel:  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
Nov  8 08:08:00 fileserv2 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov  8 08:08:00 fileserv2 kernel:  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Nov  8 08:08:00 fileserv2 kernel: DMI 2.4 present.
Nov  8 08:08:00 fileserv2 cpuspeed: Enabling ondemand cpu frequency scaling governor
Nov  8 08:08:00 fileserv2 kernel: No NUMA configuration found
Nov  8 08:08:00 fileserv2 kernel: Faking a node at 0000000000000000-000000007ff80000
Nov  8 08:08:00 fileserv2 kernel: Bootmem setup node 0 0000000000000000-000000007ff80000
Nov  8 08:08:00 fileserv2 kernel: ACPI: PM-Timer IO Port: 0x808
Nov  8 08:08:00 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov  8 08:08:00 fileserv2 kernel: Processor #0 7:7 APIC version 20
Nov  8 08:08:00 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov  8 08:08:00 fileserv2 kernel: Processor #1 7:7 APIC version 20
Nov  8 08:08:00 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov  8 08:08:00 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov  8 08:08:00 fileserv2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov  8 08:08:00 fileserv2 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov  8 08:08:00 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov  8 08:08:00 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov  8 08:08:00 fileserv2 kernel: Setting APIC routing to physical flat
Nov  8 08:08:00 fileserv2 kernel: ACPI: HPET id: 0x8086a301 base: 0xfed00000
Nov  8 08:08:00 fileserv2 kernel: Using ACPI (MADT) for SMP configuration information
Nov  8 08:08:00 fileserv2 kernel: Nosave address range: 000000000009d000 - 000000000009e000
Nov  8 08:08:00 fileserv2 kernel: Nosave address range: 000000000009e000 - 00000000000a0000
Nov  8 08:08:00 fileserv2 kernel: Nosave address range: 00000000000a0000 - 00000000000e4000
Nov  8 08:08:00 fileserv2 kernel: Nosave address range: 00000000000e4000 - 0000000000100000
Nov  8 08:08:00 fileserv2 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
Nov  8 08:08:00 fileserv2 kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Nov  8 08:08:00 fileserv2 kernel: Built 1 zonelists.  Total pages: 515389
Nov  8 08:08:00 fileserv2 kernel: Kernel command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov  8 08:08:00 fileserv2 kernel: Initializing CPU#0
Nov  8 08:08:00 fileserv2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Nov  8 08:08:00 fileserv2 kernel: Console: colour VGA+ 80x25
Nov  8 08:08:00 fileserv2 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov  8 08:08:00 fileserv2 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov  8 08:08:00 fileserv2 kernel: Checking aperture...
Nov  8 08:08:00 fileserv2 kernel: ACPI: DMAR not present
Nov  8 08:08:00 fileserv2 kernel: Memory: 1924332k/2096640k available (2592k kernel code, 171848k reserved, 1649k data, 224k init)
Nov  8 08:08:00 fileserv2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.45 BogoMIPS (lpj=2672728)
Nov  8 08:08:00 fileserv2 kernel: Security Framework v1.0.0 initialized
Nov  8 08:08:00 fileserv2 rpc.statd[2847]: Version 1.0.9 Starting
Nov  8 08:08:00 fileserv2 kernel: SELinux:  Initializing.
Nov  8 08:08:00 fileserv2 kernel: selinux_register_security:  Registering secondary module capability
Nov  8 08:08:00 fileserv2 kernel: Capability LSM initialized as secondary
Nov  8 08:08:00 fileserv2 kernel: Mount-cache hash table entries: 256
Nov  8 08:08:00 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov  8 08:08:00 fileserv2 kernel: CPU: L2 cache: 3072K
Nov  8 08:08:00 fileserv2 kernel: using mwait in idle threads.
Nov  8 08:08:00 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov  8 08:08:00 fileserv2 kernel: CPU: Processor Core ID: 0
Nov  8 08:08:00 fileserv2 kernel: CPU0: Thermal monitoring enabled (TM2)
Nov  8 08:08:00 fileserv2 kernel: SMP alternatives: switching to UP code
Nov  8 08:08:00 fileserv2 kernel: ACPI: Core revision 20060707
Nov  8 08:08:00 fileserv2 kernel: Using local APIC timer interrupts.
Nov  8 08:08:00 fileserv2 kernel: Detected 16.704 MHz APIC timer.
Nov  8 08:08:00 fileserv2 kernel: SMP alternatives: switching to SMP code
Nov  8 08:08:00 fileserv2 kernel: Booting processor 1/2 APIC 0x1
Nov  8 08:08:00 fileserv2 rpc.statd[2847]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user 
Nov  8 08:08:00 fileserv2 kernel: Initializing CPU#1
Nov  8 08:08:01 fileserv2 kernel: Calibrating delay using timer specific routine.. 5345.41 BogoMIPS (lpj=2672705)
Nov  8 08:08:01 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov  8 08:08:01 fileserv2 kernel: CPU: L2 cache: 3072K
Nov  8 08:08:01 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov  8 08:08:01 fileserv2 kernel: CPU: Processor Core ID: 1
Nov  8 08:08:01 fileserv2 kernel: CPU1: Thermal monitoring enabled (TM2)
Nov  8 08:08:01 fileserv2 kernel: Intel(R) Core(TM)2 Duo CPU     E7300  @ 2.66GHz stepping 06
Nov  8 08:08:01 fileserv2 kernel: Brought up 2 CPUs
Nov  8 08:08:01 fileserv2 kernel: NMI watchdog testing PASSED.
Nov  8 08:08:01 fileserv2 kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
Nov  8 08:08:01 fileserv2 kernel: time.c: Detected 2672.728 MHz processor.
Nov  8 08:08:01 fileserv2 kernel: migration_cost=13
Nov  8 08:08:01 fileserv2 kernel: checking if image is initramfs... it is
Nov  8 08:08:01 fileserv2 kernel: Freeing initrd memory: 2619k freed
Nov  8 08:08:01 fileserv2 kernel: NET: Registered protocol family 16
Nov  8 08:08:01 fileserv2 kernel: ACPI: bus type pci registered
Nov  8 08:08:01 fileserv2 kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Nov  8 08:08:01 fileserv2 kernel: PCI: Not using MMCONFIG.
Nov  8 08:08:01 fileserv2 kernel: PCI: Using configuration type 1
Nov  8 08:08:01 fileserv2 kernel: ACPI: Interpreter enabled
Nov  8 08:08:01 fileserv2 kernel: ACPI: Using IOAPIC for interrupt routing
Nov  8 08:08:01 fileserv2 kernel: ACPI: No dock devices found.
Nov  8 08:08:01 fileserv2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov  8 08:08:01 fileserv2 kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov  8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov  8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov  8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov  8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Nov  8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov  8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
Nov  8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Nov  8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Nov  8 08:08:01 fileserv2 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov  8 08:08:01 fileserv2 kernel: pnp: PnP ACPI init
Nov  8 08:08:01 fileserv2 kernel: pnp: PnP ACPI: found 15 devices
Nov  8 08:08:01 fileserv2 kernel: usbcore: registered new driver usbfs
Nov  8 08:08:01 fileserv2 kernel: usbcore: registered new driver hub
Nov  8 08:08:01 fileserv2 kernel: PCI: Using ACPI for IRQ routing
Nov  8 08:08:01 fileserv2 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Nov  8 08:08:01 fileserv2 kernel: NetLabel: Initializing
Nov  8 08:08:01 fileserv2 kernel: NetLabel:  domain hash size = 128
Nov  8 08:08:01 fileserv2 kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Nov  8 08:08:01 fileserv2 kernel: NetLabel:  unlabeled traffic allowed by default
Nov  8 08:08:01 fileserv2 kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
Nov  8 08:08:01 fileserv2 kernel: hpet0: 4 64-bit timers, 14318180 Hz
Nov  8 08:08:01 fileserv2 kernel: ACPI: DMAR not present
Nov  8 08:08:01 fileserv2 kernel: PCI-GART: No AMD northbridge found.
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:06: ioport range 0x290-0x297 has been reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:07: iomem range 0xffa00000-0xffafffff has been reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
Nov  8 08:08:01 fileserv2 kernel: pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
Nov  8 08:08:01 fileserv2 kernel: PCI: Bridge: 0000:00:01.0
Nov  8 08:08:01 fileserv2 kernel:   IO window: c000-cfff
Nov  8 08:08:01 fileserv2 kernel:   MEM window: fe900000-fe9fffff
Nov  8 08:08:01 fileserv2 kdump: kexec: loaded kdump kernel
Nov  8 08:08:01 fileserv2 kernel:   PREFETCH window 0x00000000d0000000-0x00000000dfffffff
Nov  8 08:08:01 fileserv2 kdump: started up
Nov  8 08:08:01 fileserv2 kernel: PCI: Bridge: 0000:00:1c.0
Nov  8 08:08:01 fileserv2 kernel:   IO window: disabled.
Nov  8 08:08:01 fileserv2 kernel:   MEM window: disabled.
Nov  8 08:08:01 fileserv2 kernel:   PREFETCH window 0x00000000fdf00000-0x00000000fdffffff
Nov  8 08:08:01 fileserv2 kernel: PCI: Bridge: 0000:00:1c.4
Nov  8 08:08:01 fileserv2 kernel:   IO window: e000-efff
Nov  8 08:08:01 fileserv2 kernel:   MEM window: feb00000-febfffff
Nov  8 08:08:01 fileserv2 kernel:   PREFETCH window: disabled.
Nov  8 08:08:01 fileserv2 kernel: PCI: Bridge: 0000:00:1c.5
Nov  8 08:08:02 fileserv2 kernel:   IO window: d000-dfff
Nov  8 08:08:02 fileserv2 kernel:   MEM window: fea00000-feafffff
Nov  8 08:08:02 fileserv2 kernel:   PREFETCH window: disabled.
Nov  8 08:08:02 fileserv2 kernel: PCI: Bridge: 0000:00:1e.0
Nov  8 08:08:02 fileserv2 kernel:   IO window: disabled.
Nov  8 08:08:02 fileserv2 kernel:   MEM window: disabled.
Nov  8 08:08:02 fileserv2 kernel:   PREFETCH window: disabled.
Nov  8 08:08:02 fileserv2 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Nov  8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov  8 08:08:02 fileserv2 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Nov  8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
Nov  8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
Nov  8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 16 (level, low) -> IRQ 169
Nov  8 08:08:02 fileserv2 kernel: NET: Registered protocol family 2
Nov  8 08:08:02 fileserv2 hcid[3006]: Bluetooth HCI daemon
Nov  8 08:08:02 fileserv2 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov  8 08:08:02 fileserv2 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Nov  8 08:08:02 fileserv2 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov  8 08:08:02 fileserv2 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Nov  8 08:08:02 fileserv2 sdpd[3010]: Bluetooth SDP daemon 
Nov  8 08:08:02 fileserv2 kernel: TCP reno registered
Nov  8 08:08:02 fileserv2 kernel: audit: initializing netlink socket (disabled)
Nov  8 08:08:02 fileserv2 kernel: type=2000 audit(1320739636.512:1): initialized
Nov  8 08:08:02 fileserv2 kernel: Total HugeTLB memory allocated, 0
Nov  8 08:08:02 fileserv2 kernel: VFS: Disk quotas dquot_6.5.1
Nov  8 08:08:02 fileserv2 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov  8 08:08:02 fileserv2 hcid[3006]: Register path:/org/bluez fallback:1
Nov  8 08:08:02 fileserv2 kernel: Initializing Cryptographic API
Nov  8 08:08:02 fileserv2 kernel: alg: No test for crc32c (crc32c-generic)
Nov  8 08:08:02 fileserv2 kernel: ksign: Installing public key data
Nov  8 08:08:02 fileserv2 kernel: Loading keyring
Nov  8 08:08:02 fileserv2 kernel: - Added public key C099FB4D84A418B6
Nov  8 08:08:02 fileserv2 kernel: - User ID: CentOS (Kernel Module GPG key)
Nov  8 08:08:02 fileserv2 kernel: io scheduler noop registered
Nov  8 08:08:02 fileserv2 kernel: io scheduler anticipatory registered
Nov  8 08:08:02 fileserv2 pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
Nov  8 08:08:02 fileserv2 kernel: io scheduler deadline registered
Nov  8 08:08:02 fileserv2 kernel: io scheduler cfq registered (default)
Nov  8 08:08:02 fileserv2 pcscd: hotplug_libusb.c:402:HPEstablishUSBNotifications() Driver ifd-egate.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
Nov  8 08:08:02 fileserv2 pcscd: hotplug_libusb.c:411:HPEstablishUSBNotifications() Polling forced every 1 second(s)
Nov  8 08:08:02 fileserv2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov  8 08:08:02 fileserv2 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
Nov  8 08:08:02 fileserv2 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
Nov  8 08:08:02 fileserv2 kernel: Real Time Clock Driver v1.12ac
Nov  8 08:08:02 fileserv2 kernel: Non-volatile memory driver v1.2
Nov  8 08:08:02 fileserv2 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov  8 08:08:02 fileserv2 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov  8 08:08:02 fileserv2 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov  8 08:08:02 fileserv2 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov  8 08:08:02 fileserv2 kernel: brd: module loaded
Nov  8 08:08:02 fileserv2 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov  8 08:08:02 fileserv2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov  8 08:08:02 fileserv2 kernel: ide-floppy driver 0.99.newide
Nov  8 08:08:02 fileserv2 kernel: usbcore: registered new driver hiddev
Nov  8 08:08:02 fileserv2 kernel: usbcore: registered new driver usbhid
Nov  8 08:08:02 fileserv2 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Nov  8 08:08:02 fileserv2 kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Nov  8 08:08:02 fileserv2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov  8 08:08:02 fileserv2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov  8 08:08:02 fileserv2 kernel: mice: PS/2 mouse device common for all mice
Nov  8 08:08:02 fileserv2 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov  8 08:08:02 fileserv2 kernel: md: bitmap version 4.39
Nov  8 08:08:02 fileserv2 kernel: TCP bic registered
Nov  8 08:08:02 fileserv2 kernel: Initializing IPsec netlink socket
Nov  8 08:08:02 fileserv2 kernel: NET: Registered protocol family 1
Nov  8 08:08:02 fileserv2 kernel: NET: Registered protocol family 17
Nov  8 08:08:02 fileserv2 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov  8 08:08:02 fileserv2 kernel: Initalizing network drop monitor service
Nov  8 08:08:02 fileserv2 kernel: Freeing unused kernel memory: 224k freed
Nov  8 08:08:02 fileserv2 kernel: Write protecting the kernel read-only data: 519k
Nov  8 08:08:02 fileserv2 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Nov  8 08:08:02 fileserv2 kernel: GSI 18 sharing vector 0xE1 and IRQ 18
Nov  8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: debug port 1
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: irq 225, io mem 0xfe8ffc00
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov  8 08:08:03 fileserv2 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov  8 08:08:03 fileserv2 kernel: hub 1-0:1.0: USB hub found
Nov  8 08:08:03 fileserv2 kernel: hub 1-0:1.0: 6 ports detected
Nov  8 08:08:03 fileserv2 kernel: GSI 19 sharing vector 0xE9 and IRQ 19
Nov  8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfe8ff800
Nov  8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov  8 08:08:03 fileserv2 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov  8 08:08:03 fileserv2 kernel: hub 2-0:1.0: USB hub found
Nov  8 08:08:03 fileserv2 kernel: hub 2-0:1.0: 6 ports detected
Nov  8 08:08:03 fileserv2 kernel: USB Universal Host Controller Interface driver v3.0
Nov  8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000b800
Nov  8 08:08:03 fileserv2 kernel: usb usb3: configuration #1 chosen from 1 choice
Nov  8 08:08:03 fileserv2 kernel: hub 3-0:1.0: USB hub found
Nov  8 08:08:03 fileserv2 kernel: hub 3-0:1.0: 2 ports detected
Nov  8 08:08:03 fileserv2 kernel: GSI 20 sharing vector 0x32 and IRQ 20
Nov  8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 50
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.1: irq 50, io base 0x0000b880
Nov  8 08:08:03 fileserv2 kernel: usb usb4: configuration #1 chosen from 1 choice
Nov  8 08:08:03 fileserv2 kernel: hub 4-0:1.0: USB hub found
Nov  8 08:08:03 fileserv2 kernel: hub 4-0:1.0: 2 ports detected
Nov  8 08:08:03 fileserv2 kernel: input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Nov  8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 225
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.2: irq 225, io base 0x0000bc00
Nov  8 08:08:03 fileserv2 kernel: usb usb5: configuration #1 chosen from 1 choice
Nov  8 08:08:03 fileserv2 kernel: hub 5-0:1.0: USB hub found
Nov  8 08:08:03 fileserv2 kernel: hub 5-0:1.0: 2 ports detected
Nov  8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000b080
Nov  8 08:08:03 fileserv2 kernel: usb usb6: configuration #1 chosen from 1 choice
Nov  8 08:08:03 fileserv2 kernel: hub 6-0:1.0: USB hub found
Nov  8 08:08:03 fileserv2 kernel: hub 6-0:1.0: 2 ports detected
Nov  8 08:08:03 fileserv2 kernel: GSI 21 sharing vector 0x3A and IRQ 21
Nov  8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 58
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.1: irq 58, io base 0x0000b400
Nov  8 08:08:03 fileserv2 kernel: usb usb7: configuration #1 chosen from 1 choice
Nov  8 08:08:03 fileserv2 kernel: hub 7-0:1.0: USB hub found
Nov  8 08:08:03 fileserv2 kernel: hub 7-0:1.0: 2 ports detected
Nov  8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Nov  8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000b480
Nov  8 08:08:03 fileserv2 kernel: usb usb8: configuration #1 chosen from 1 choice
Nov  8 08:08:03 fileserv2 kernel: hub 8-0:1.0: USB hub found
Nov  8 08:08:03 fileserv2 kernel: hub 8-0:1.0: 2 ports detected
Nov  8 08:08:03 fileserv2 kernel: md: raid1 personality registered for level 1
Nov  8 08:08:03 fileserv2 kernel: SCSI subsystem initialized
Nov  8 08:08:03 fileserv2 kernel: GSI 22 sharing vector 0x42 and IRQ 22
Nov  8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 22 (level, low) -> IRQ 66
Nov  8 08:08:03 fileserv2 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Nov  8 08:08:03 fileserv2 kernel: scsi0 : ata_piix
Nov  8 08:08:03 fileserv2 kernel: scsi1 : ata_piix
Nov  8 08:08:03 fileserv2 kernel: ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 66
Nov  8 08:08:03 fileserv2 kernel: ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 66
Nov  8 08:08:03 fileserv2 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  8 08:08:03 fileserv2 kernel: ata1.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov  8 08:08:03 fileserv2 kernel: ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov  8 08:08:03 fileserv2 kernel: ata1.00: configured for UDMA/133
Nov  8 08:08:03 fileserv2 kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  8 08:08:03 fileserv2 kernel: ata2.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov  8 08:08:03 fileserv2 kernel: ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov  8 08:08:03 fileserv2 kernel: ata2.00: configured for UDMA/133
Nov  8 08:08:03 fileserv2 kernel:   Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
Nov  8 08:08:03 fileserv2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov  8 08:08:03 fileserv2 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 08:08:03 fileserv2 kernel: sda: Write Protect is off
Nov  8 08:08:04 fileserv2 kernel: SCSI device sda: drive cache: write back
Nov  8 08:08:04 fileserv2 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 08:08:04 fileserv2 kernel: sda: Write Protect is off
Nov  8 08:08:04 fileserv2 kernel: SCSI device sda: drive cache: write back
Nov  8 08:08:04 fileserv2 kernel:  sda: sda1 sda2 sda3 sda4 < sda5 >
Nov  8 08:08:04 fileserv2 kernel: sd 0:0:0:0: Attached scsi disk sda
Nov  8 08:08:04 fileserv2 kernel:   Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
Nov  8 08:08:04 fileserv2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 08:08:04 fileserv2 kernel: sdb: Write Protect is off
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdb: drive cache: write back
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 08:08:04 fileserv2 kernel: sdb: Write Protect is off
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdb: drive cache: write back
Nov  8 08:08:04 fileserv2 kernel:  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
Nov  8 08:08:04 fileserv2 kernel: sd 1:0:0:0: Attached scsi disk sdb
Nov  8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 22 (level, low) -> IRQ 66
Nov  8 08:08:04 fileserv2 kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Nov  8 08:08:04 fileserv2 kernel: scsi2 : ata_piix
Nov  8 08:08:04 fileserv2 kernel: scsi3 : ata_piix
Nov  8 08:08:04 fileserv2 kernel: ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 66
Nov  8 08:08:04 fileserv2 kernel: ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 66
Nov  8 08:08:04 fileserv2 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  8 08:08:04 fileserv2 kernel: ata3.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov  8 08:08:04 fileserv2 kernel: ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov  8 08:08:04 fileserv2 kernel: ata3.00: configured for UDMA/133
Nov  8 08:08:04 fileserv2 kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  8 08:08:04 fileserv2 kernel: ata4.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov  8 08:08:04 fileserv2 kernel: ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov  8 08:08:04 fileserv2 kernel: ata4.00: configured for UDMA/133
Nov  8 08:08:04 fileserv2 kernel:   Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
Nov  8 08:08:04 fileserv2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 08:08:04 fileserv2 kernel: sdc: Write Protect is off
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdc: drive cache: write back
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 08:08:04 fileserv2 kernel: sdc: Write Protect is off
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdc: drive cache: write back
Nov  8 08:08:04 fileserv2 kernel:  sdc: sdc1
Nov  8 08:08:04 fileserv2 kernel: sd 2:0:0:0: Attached scsi disk sdc
Nov  8 08:08:04 fileserv2 kernel:   Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
Nov  8 08:08:04 fileserv2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 08:08:04 fileserv2 kernel: sdd: Write Protect is off
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdd: drive cache: write back
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 08:08:04 fileserv2 kernel: sdd: Write Protect is off
Nov  8 08:08:04 fileserv2 kernel: SCSI device sdd: drive cache: write back
Nov  8 08:08:04 fileserv2 kernel:  sdd: sdd1
Nov  8 08:08:04 fileserv2 kernel: sd 3:0:0:0: Attached scsi disk sdd
Nov  8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov  8 08:08:04 fileserv2 kernel: scsi4 : pata_marvell
Nov  8 08:08:04 fileserv2 kernel: scsi5 : pata_marvell
Nov  8 08:08:04 fileserv2 kernel: ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 169
Nov  8 08:08:04 fileserv2 kernel: ata6: DUMMY
Nov  8 08:08:04 fileserv2 kernel: ata5.00: ATAPI: Optiarc DVD RW AD-5200A, 1.09, max UDMA/66
Nov  8 08:08:04 fileserv2 kernel: ata5.00: configured for UDMA/66
Nov  8 08:08:04 fileserv2 kernel:   Vendor: Optiarc   Model: DVD RW AD-5200A   Rev: 1.09
Nov  8 08:08:04 fileserv2 kernel:   Type:   CD-ROM                             ANSI SCSI revision: 05
Nov  8 08:08:04 fileserv2 kernel: device-mapper: uevent: version 1.0.3
Nov  8 08:08:04 fileserv2 kernel: device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
Nov  8 08:08:04 fileserv2 kernel: device-mapper: dm-raid45: initialized v0.2594l
Nov  8 08:08:04 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov  8 08:08:04 fileserv2 kernel: md: autorun ...
Nov  8 08:08:04 fileserv2 kernel: md: considering sdd1 ...
Nov  8 08:08:04 fileserv2 kernel: md:  adding sdd1 ...
Nov  8 08:08:04 fileserv2 kernel: md:  adding sdc1 ...
Nov  8 08:08:04 fileserv2 kernel: md: sdb5 has different UUID to sdd1
Nov  8 08:08:04 fileserv2 kernel: md: sdb3 has different UUID to sdd1
Nov  8 08:08:04 fileserv2 kernel: md: sdb2 has different UUID to sdd1
Nov  8 08:08:04 fileserv2 kernel: md: sdb1 has different UUID to sdd1
Nov  8 08:08:04 fileserv2 kernel: md: sda5 has different UUID to sdd1
Nov  8 08:08:04 fileserv2 kernel: md: sda3 has different UUID to sdd1
Nov  8 08:08:04 fileserv2 kernel: md: sda2 has different UUID to sdd1
Nov  8 08:08:04 fileserv2 kernel: md: sda1 has different UUID to sdd1
Nov  8 08:08:04 fileserv2 kernel: md: created md4
Nov  8 08:08:04 fileserv2 kernel: md: bind<sdc1>
Nov  8 08:08:04 fileserv2 kernel: md: bind<sdd1>
Nov  8 08:08:04 fileserv2 kernel: md: running: <sdd1><sdc1>
Nov  8 08:08:04 fileserv2 kernel: raid1: raid set md4 active with 2 out of 2 mirrors
Nov  8 08:08:04 fileserv2 kernel: md: considering sdb5 ...
Nov  8 08:08:04 fileserv2 kernel: md:  adding sdb5 ...
Nov  8 08:08:04 fileserv2 kernel: md: sdb3 has different UUID to sdb5
Nov  8 08:08:04 fileserv2 kernel: md: sdb2 has different UUID to sdb5
Nov  8 08:08:04 fileserv2 kernel: md: sdb1 has different UUID to sdb5
Nov  8 08:08:04 fileserv2 kernel: md:  adding sda5 ...
Nov  8 08:08:04 fileserv2 kernel: md: sda3 has different UUID to sdb5
Nov  8 08:08:04 fileserv2 kernel: md: sda2 has different UUID to sdb5
Nov  8 08:08:04 fileserv2 kernel: md: sda1 has different UUID to sdb5
Nov  8 08:08:04 fileserv2 kernel: md: created md3
Nov  8 08:08:04 fileserv2 kernel: md: bind<sda5>
Nov  8 08:08:04 fileserv2 kernel: md: bind<sdb5>
Nov  8 08:08:04 fileserv2 kernel: md: running: <sdb5><sda5>
Nov  8 08:08:04 fileserv2 kernel: raid1: raid set md3 active with 2 out of 2 mirrors
Nov  8 08:08:04 fileserv2 kernel: md: considering sdb3 ...
Nov  8 08:08:04 fileserv2 kernel: md:  adding sdb3 ...
Nov  8 08:08:04 fileserv2 kernel: md: sdb2 has different UUID to sdb3
Nov  8 08:08:04 fileserv2 kernel: md: sdb1 has different UUID to sdb3
Nov  8 08:08:04 fileserv2 hidd[3170]: Bluetooth HID daemon
Nov  8 08:08:04 fileserv2 kernel: md:  adding sda3 ...
Nov  8 08:08:04 fileserv2 kernel: md: sda2 has different UUID to sdb3
Nov  8 08:08:04 fileserv2 kernel: md: sda1 has different UUID to sdb3
Nov  8 08:08:04 fileserv2 kernel: md: created md1
Nov  8 08:08:04 fileserv2 kernel: md: bind<sda3>
Nov  8 08:08:04 fileserv2 kernel: md: bind<sdb3>
Nov  8 08:08:04 fileserv2 kernel: md: running: <sdb3><sda3>
Nov  8 08:08:04 fileserv2 kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Nov  8 08:08:04 fileserv2 kernel: md: considering sdb2 ...
Nov  8 08:08:04 fileserv2 kernel: md:  adding sdb2 ...
Nov  8 08:08:04 fileserv2 kernel: md: sdb1 has different UUID to sdb2
Nov  8 08:08:04 fileserv2 kernel: md:  adding sda2 ...
Nov  8 08:08:04 fileserv2 kernel: md: sda1 has different UUID to sdb2
Nov  8 08:08:04 fileserv2 kernel: md: created md2
Nov  8 08:08:04 fileserv2 kernel: md: bind<sda2>
Nov  8 08:08:04 fileserv2 kernel: md: bind<sdb2>
Nov  8 08:08:04 fileserv2 kernel: md: running: <sdb2><sda2>
Nov  8 08:08:04 fileserv2 kernel: raid1: raid set md2 active with 2 out of 2 mirrors
Nov  8 08:08:04 fileserv2 kernel: md: considering sdb1 ...
Nov  8 08:08:04 fileserv2 kernel: md:  adding sdb1 ...
Nov  8 08:08:04 fileserv2 kernel: md:  adding sda1 ...
Nov  8 08:08:04 fileserv2 kernel: md: created md0
Nov  8 08:08:04 fileserv2 kernel: md: bind<sda1>
Nov  8 08:08:04 fileserv2 kernel: md: bind<sdb1>
Nov  8 08:08:04 fileserv2 kernel: md: running: <sdb1><sda1>
Nov  8 08:08:04 fileserv2 kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Nov  8 08:08:04 fileserv2 kernel: md: ... autorun DONE.
Nov  8 08:08:04 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov  8 08:08:04 fileserv2 kernel: md: autorun ...
Nov  8 08:08:04 fileserv2 kernel: md: ... autorun DONE.
Nov  8 08:08:04 fileserv2 kernel: kjournald starting.  Commit interval 5 seconds
Nov  8 08:08:04 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov  8 08:08:04 fileserv2 kernel: SELinux:  Disabled at runtime.
Nov  8 08:08:04 fileserv2 kernel: type=1404 audit(1320739661.840:2): selinux=0 auid=4294967295 ses=4294967295
Nov  8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 225
Nov  8 08:08:04 fileserv2 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov  8 08:08:04 fileserv2 kernel: input: PC Speaker as /class/input/input2
Nov  8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 66
Nov  8 08:08:04 fileserv2 kernel: hda_codec: ALC883: BIOS auto-probing.
Nov  8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:01:00.1[b] -> GSI 17 (level, low) -> IRQ 177
Nov  8 08:08:04 fileserv2 kernel: sky2 driver version 1.22
Nov  8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Nov  8 08:08:05 fileserv2 kernel: sky2 0000:02:00.0: v1.22 addr 0xfeafc000 irq 177 Yukon-2 EC Ultra rev 3
Nov  8 08:08:05 fileserv2 kernel: sky2 eth0: addr 00:1f:c6:1e:c8:d3
Nov  8 08:08:05 fileserv2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov  8 08:08:05 fileserv2 kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Nov  8 08:08:05 fileserv2 kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Nov  8 08:08:05 fileserv2 kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0
Nov  8 08:08:05 fileserv2 kernel: scsi 4:0:0:0: Attached scsi generic sg4 type 5
Nov  8 08:08:05 fileserv2 kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Nov  8 08:08:05 fileserv2 kernel: Uniform CD-ROM driver Revision: 3.20
Nov  8 08:08:05 fileserv2 kernel: floppy0: no floppy controllers found
Nov  8 08:08:05 fileserv2 kernel: work still pending
Nov  8 08:08:05 fileserv2 kernel: lp: driver loaded but no devices found
Nov  8 08:08:05 fileserv2 kernel: ACPI: Power Button (FF) [PWRF]
Nov  8 08:08:05 fileserv2 kernel: ACPI: Power Button (CM) [PWRB]
Nov  8 08:08:05 fileserv2 kernel: ACPI: Mapper loaded
Nov  8 08:08:05 fileserv2 kernel: dell-wmi: No known WMI GUID found
Nov  8 08:08:05 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov  8 08:08:05 fileserv2 kernel: md: autorun ...
Nov  8 08:08:05 fileserv2 kernel: md: ... autorun DONE.
Nov  8 08:08:05 fileserv2 kernel: device-mapper: multipath: version 1.0.5 loaded
Nov  8 08:08:05 fileserv2 kernel: device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Nov  8 08:08:05 fileserv2 kernel: device-mapper: ioctl: error adding target to table
Nov  8 08:08:05 fileserv2 kernel: device-mapper: ioctl: device doesn't appear to be in the dev hash table.

i2ks, постараюсь добраться до моего сервака сегодня и опробовать.

14 Ответ от Dee

  • Dee
  • Посетитель
  • Неактивен
  • Зарегистрирован: 09.11.2011
  • Сообщений: 8
  • Репутация : [ 0 | 0 ]

Продолжение messages. Лог, опять неполный, если необходимо дополню...

+ открыть спойлер
Nov  8 08:08:05 fileserv2 kernel: EXT3 FS on md2, internal journal
Nov  8 08:08:05 fileserv2 kernel: kjournald starting.  Commit interval 5 seconds
Nov  8 08:08:05 fileserv2 kernel: EXT3 FS on md4, internal journal
Nov  8 08:08:05 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov  8 08:08:05 fileserv2 kernel: kjournald starting.  Commit interval 5 seconds
Nov  8 08:08:05 fileserv2 kernel: EXT3 FS on md3, internal journal
Nov  8 08:08:05 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov  8 08:08:05 fileserv2 kernel: kjournald starting.  Commit interval 5 seconds
Nov  8 08:08:05 fileserv2 kernel: EXT3 FS on md0, internal journal
Nov  8 08:08:05 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov  8 08:08:05 fileserv2 kernel: Adding 1020024k swap on /dev/md1.  Priority:-1 extents:1 across:1020024k
Nov  8 08:08:05 fileserv2 kernel: IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
Nov  8 08:08:05 fileserv2 kernel: microcode: CPU1 updated from revision 0x60c to 0x60f, date = 09292010 
Nov  8 08:08:05 fileserv2 kernel: microcode: CPU0 updated from revision 0x60c to 0x60f, date = 09292010 
Nov  8 08:08:05 fileserv2 kernel: Loading iSCSI transport class v2.0-871.
Nov  8 08:08:05 fileserv2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Nov  8 08:08:05 fileserv2 kernel: All bugs added by David S. Miller <davem@redhat.com>
Nov  8 08:08:05 fileserv2 kernel: cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
Nov  8 08:08:05 fileserv2 kernel: iscsi: registered transport (cxgb3i)
Nov  8 08:08:05 fileserv2 kernel: NET: Registered protocol family 10
Nov  8 08:08:05 fileserv2 kernel: lo: Disabled Privacy Extensions
Nov  8 08:08:05 fileserv2 kernel: IPv6 over IPv4 tunneling driver
Nov  8 08:08:05 fileserv2 kernel: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
Nov  8 08:08:05 fileserv2 kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
Nov  8 08:08:05 fileserv2 kernel: iscsi: registered transport (bnx2i)
Nov  8 08:08:05 fileserv2 kernel: iscsi: registered transport (tcp)
Nov  8 08:08:05 fileserv2 kernel: iscsi: registered transport (iser)
Nov  8 08:08:05 fileserv2 kernel: iscsi: registered transport (be2iscsi)
Nov  8 08:08:05 fileserv2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov  8 08:08:05 fileserv2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov  8 08:08:05 fileserv2 kernel: Netfilter messages via NETLINK v0.30.
Nov  8 08:08:05 fileserv2 kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
Nov  8 08:08:05 fileserv2 kernel: sky2 eth0: enabling interface
Nov  8 08:08:05 fileserv2 kernel: sky2 eth0: ram buffer 0K
Nov  8 08:08:05 fileserv2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov  8 08:08:05 fileserv2 kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Nov  8 08:08:05 fileserv2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov  8 08:08:05 fileserv2 kernel: Bluetooth: Core ver 2.10
Nov  8 08:08:05 fileserv2 kernel: NET: Registered protocol family 31
Nov  8 08:08:05 fileserv2 kernel: Bluetooth: HCI device and connection manager initialized
Nov  8 08:08:05 fileserv2 kernel: Bluetooth: HCI socket layer initialized
Nov  8 08:08:05 fileserv2 kernel: Bluetooth: L2CAP ver 2.8
Nov  8 08:08:05 fileserv2 kernel: Bluetooth: L2CAP socket layer initialized
Nov  8 08:08:05 fileserv2 kernel: Bluetooth: RFCOMM socket layer initialized
Nov  8 08:08:05 fileserv2 kernel: Bluetooth: RFCOMM TTY layer initialized
Nov  8 08:08:05 fileserv2 kernel: Bluetooth: RFCOMM ver 1.8
Nov  8 08:08:05 fileserv2 kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Nov  8 08:08:06 fileserv2 automount[3213]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
Nov  8 08:08:06 fileserv2 hpiod: 1.6.7 accepting connections at 2208... 
Nov  8 08:08:07 fileserv2 xinetd[3291]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Nov  8 08:08:07 fileserv2 xinetd[3291]: Started working: 0 available services
Nov  8 08:08:08 fileserv2 gpm[3337]: *** info [startup.c(95)]: 
Nov  8 08:08:08 fileserv2 gpm[3337]: Started gpm successfully. Entered daemon mode.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Successfully dropped root privileges.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: avahi-daemon 0.6.16 starting up.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Successfully called chroot().
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Successfully dropped remaining capabilities.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: No service found in /etc/avahi/services.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: New relevant interface eth0.IPv6 for mDNS.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21f:c6ff:fe1e:c8d3.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: New relevant interface eth0.IPv4 for mDNS.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.208.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Network interface enumeration completed.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Registering new address record for fe80::21f:c6ff:fe1e:c8d3 on eth0.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Registering new address record for 192.168.0.208 on eth0.
Nov  8 08:08:09 fileserv2 avahi-daemon[3464]: Registering HINFO record with values 'X86_64'/'LINUX'.
Nov  8 08:08:09 fileserv2 smartd[3494]: smartd version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen 
Nov  8 08:08:09 fileserv2 smartd[3494]: Home page is http://smartmontools.sourceforge.net/  
Nov  8 08:08:09 fileserv2 smartd[3494]: Opened configuration file /etc/smartd.conf 
Nov  8 08:08:09 fileserv2 smartd[3494]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices 
Nov  8 08:08:09 fileserv2 smartd[3494]: Problem creating device name scan list 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sda, opened 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sda, opened 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sda, found in smartd database. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdb, opened 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device /dev/sdb: using '-d sat' for ATA disk behind SAT layer. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdb, opened 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdb, found in smartd database. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdc, opened 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device /dev/sdc: using '-d sat' for ATA disk behind SAT layer. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdc, opened 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdc, found in smartd database. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdd, opened 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device /dev/sdd: using '-d sat' for ATA disk behind SAT layer. 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdd, opened 
Nov  8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdd, found in smartd database. 
Nov  8 08:08:10 fileserv2 smartd[3494]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list. 
Nov  8 08:08:10 fileserv2 smartd[3494]: Monitoring 0 ATA and 4 SCSI devices 
Nov  8 08:08:10 fileserv2 avahi-daemon[3464]: Server startup complete. Host name is fileserv2.local. Local service cookie is 1606065196.
Nov  8 08:08:10 fileserv2 smartd[3496]: smartd has fork()ed into background mode. New PID=3496. 
Nov  8 08:15:27 fileserv2 smbd[3599]: [2011/11/08 08:15:27, 0] lib/util_sock.c:get_peer_addr(1224) 
Nov  8 08:15:27 fileserv2 smbd[3599]:   getpeername failed. Error was Конечная точка передачи не подсоединена 
Nov  8 08:15:27 fileserv2 smbd[3599]: [2011/11/08 08:15:27, 0] lib/util_sock.c:write_data(562) 
Nov  8 08:15:27 fileserv2 smbd[3599]:   write_data: write failure in writing to client 192.168.0.68. Error Соединение сброшено другой стороной 
Nov  8 08:15:27 fileserv2 smbd[3599]: [2011/11/08 08:15:27, 0] lib/util_sock.c:send_smb(761) 
Nov  8 08:15:27 fileserv2 smbd[3599]:   Error writing 4 bytes to client. -1. (Соединение сброшено другой стороной) 
Nov  8 08:35:50 fileserv2 shutdown[3633]: shutting down for system reboot
Nov  8 08:35:51 fileserv2 smartd[3496]: smartd received signal 15: Terminated 
Nov  8 08:35:51 fileserv2 smartd[3496]: smartd is exiting (exit status 0) 
Nov  8 08:35:51 fileserv2 avahi-daemon[3464]: Got SIGTERM, quitting.
Nov  8 08:35:51 fileserv2 avahi-daemon[3464]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21f:c6ff:fe1e:c8d3.
Nov  8 08:35:51 fileserv2 avahi-daemon[3464]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.208.
Nov  8 08:35:53 fileserv2 nmbd[3408]: [2011/11/08 08:35:53, 0] nmbd/nmbd.c:terminate(58) 
Nov  8 08:35:53 fileserv2 nmbd[3408]:   Got SIGTERM: going down... 
Nov  8 08:35:53 fileserv2 xinetd[3291]: Exiting...
Nov  8 08:35:57 fileserv2 hcid[3006]: Got disconnected from the system message bus
Nov  8 08:35:57 fileserv2 rpc.statd[2847]: Caught signal 15, un-registering and exiting.
Nov  8 08:35:57 fileserv2 auditd[2674]: The audit daemon is exiting.
Nov  8 08:35:57 fileserv2 kernel: audit(1320723357.542:17): audit_pid=0 old=2674 by auid=4294967295
Nov  8 08:35:57 fileserv2 pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide
Nov  8 08:35:57 fileserv2 pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped
Nov  8 08:35:58 fileserv2 pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function
Nov  8 08:35:58 fileserv2 pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run
Nov  8 08:35:58 fileserv2 kernel: Kernel logging (proc) stopped.
Nov  8 08:35:58 fileserv2 kernel: Kernel log daemon terminating.
Nov  8 08:35:59 fileserv2 exiting on signal 15
Nov  8 10:34:05 fileserv2 syslogd 1.4.1: restart.
Nov  8 10:34:05 fileserv2 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov  8 10:34:05 fileserv2 kernel: Linux version 2.6.18-238.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jan 13 15:51:15 EST 2011
Nov  8 10:34:05 fileserv2 kernel: Command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov  8 10:34:05 fileserv2 kernel: BIOS-provided physical RAM map:
Nov  8 10:34:05 fileserv2 kernel:  BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
Nov  8 10:34:05 fileserv2 kernel:  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Nov  8 10:34:05 fileserv2 kernel:  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov  8 10:34:05 fileserv2 kernel:  BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
Nov  8 10:34:05 fileserv2 kernel:  BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
Nov  8 10:34:05 fileserv2 kernel:  BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
Nov  8 10:34:05 fileserv2 kernel:  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
Nov  8 10:34:05 fileserv2 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov  8 10:34:05 fileserv2 kernel:  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Nov  8 10:34:05 fileserv2 kernel: DMI 2.4 present.
Nov  8 10:34:05 fileserv2 kernel: No NUMA configuration found
Nov  8 10:34:05 fileserv2 cpuspeed: Enabling ondemand cpu frequency scaling governor
Nov  8 10:34:05 fileserv2 kernel: Faking a node at 0000000000000000-000000007ff80000
Nov  8 10:34:05 fileserv2 kernel: Bootmem setup node 0 0000000000000000-000000007ff80000
Nov  8 10:34:05 fileserv2 kernel: ACPI: PM-Timer IO Port: 0x808
Nov  8 10:34:05 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov  8 10:34:05 fileserv2 kernel: Processor #0 7:7 APIC version 20
Nov  8 10:34:05 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov  8 10:34:05 fileserv2 kernel: Processor #1 7:7 APIC version 20
Nov  8 10:34:05 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov  8 10:34:05 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov  8 10:34:05 fileserv2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov  8 10:34:05 fileserv2 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov  8 10:34:05 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov  8 10:34:05 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov  8 10:34:05 fileserv2 kernel: Setting APIC routing to physical flat
Nov  8 10:34:05 fileserv2 kernel: ACPI: HPET id: 0x8086a301 base: 0xfed00000
Nov  8 10:34:05 fileserv2 kernel: Using ACPI (MADT) for SMP configuration information
Nov  8 10:34:05 fileserv2 kernel: Nosave address range: 000000000009d000 - 000000000009e000
Nov  8 10:34:05 fileserv2 kernel: Nosave address range: 000000000009e000 - 00000000000a0000
Nov  8 10:34:05 fileserv2 kernel: Nosave address range: 00000000000a0000 - 00000000000e4000
Nov  8 10:34:05 fileserv2 kernel: Nosave address range: 00000000000e4000 - 0000000000100000
Nov  8 10:34:05 fileserv2 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
Nov  8 10:34:05 fileserv2 kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Nov  8 10:34:05 fileserv2 kernel: Built 1 zonelists.  Total pages: 515389
Nov  8 10:34:05 fileserv2 kernel: Kernel command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov  8 10:34:05 fileserv2 kernel: Initializing CPU#0
Nov  8 10:34:05 fileserv2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Nov  8 10:34:05 fileserv2 kernel: Console: colour VGA+ 80x25
Nov  8 10:34:05 fileserv2 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov  8 10:34:05 fileserv2 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov  8 10:34:05 fileserv2 kernel: Checking aperture...
Nov  8 10:34:05 fileserv2 kernel: ACPI: DMAR not present
Nov  8 10:34:05 fileserv2 kernel: Memory: 1924332k/2096640k available (2592k kernel code, 171848k reserved, 1649k data, 224k init)
Nov  8 10:34:05 fileserv2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.45 BogoMIPS (lpj=2672725)
Nov  8 10:34:05 fileserv2 kernel: Security Framework v1.0.0 initialized
Nov  8 10:34:05 fileserv2 kernel: SELinux:  Initializing.
Nov  8 10:34:05 fileserv2 kernel: selinux_register_security:  Registering secondary module capability
Nov  8 10:34:05 fileserv2 kernel: Capability LSM initialized as secondary
Nov  8 10:34:05 fileserv2 kernel: Mount-cache hash table entries: 256
Nov  8 10:34:05 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov  8 10:34:05 fileserv2 kernel: CPU: L2 cache: 3072K
Nov  8 10:34:05 fileserv2 kernel: using mwait in idle threads.
Nov  8 10:34:05 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov  8 10:34:05 fileserv2 kernel: CPU: Processor Core ID: 0
Nov  8 10:34:05 fileserv2 kernel: CPU0: Thermal monitoring enabled (TM2)
Nov  8 10:34:05 fileserv2 kernel: SMP alternatives: switching to UP code
Nov  8 10:34:05 fileserv2 kernel: ACPI: Core revision 20060707
Nov  8 10:34:05 fileserv2 kernel: Using local APIC timer interrupts.
Nov  8 10:34:05 fileserv2 kernel: Detected 16.704 MHz APIC timer.
Nov  8 10:34:05 fileserv2 kernel: SMP alternatives: switching to SMP code
Nov  8 10:34:05 fileserv2 kernel: Booting processor 1/2 APIC 0x1
Nov  8 10:34:05 fileserv2 kernel: Initializing CPU#1
Nov  8 10:34:05 fileserv2 kernel: Calibrating delay using timer specific routine.. 5345.41 BogoMIPS (lpj=2672705)
Nov  8 10:34:05 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov  8 10:34:05 fileserv2 kernel: CPU: L2 cache: 3072K
Nov  8 10:34:05 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov  8 10:34:05 fileserv2 kernel: CPU: Processor Core ID: 1
Nov  8 10:34:05 fileserv2 kernel: CPU1: Thermal monitoring enabled (TM2)
Nov  8 10:34:05 fileserv2 kernel: Intel(R) Core(TM)2 Duo CPU     E7300  @ 2.66GHz stepping 06
Nov  8 10:34:05 fileserv2 kernel: Brought up 2 CPUs
Nov  8 10:34:05 fileserv2 kernel: NMI watchdog testing PASSED.
Nov  8 10:34:05 fileserv2 kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
Nov  8 10:34:05 fileserv2 kernel: time.c: Detected 2672.725 MHz processor.
Nov  8 10:34:05 fileserv2 kernel: migration_cost=15
Nov  8 10:34:05 fileserv2 kernel: checking if image is initramfs... it is
Nov  8 10:34:05 fileserv2 kernel: Freeing initrd memory: 2619k freed
Nov  8 10:34:05 fileserv2 kernel: NET: Registered protocol family 16
Nov  8 10:34:05 fileserv2 kernel: ACPI: bus type pci registered
Nov  8 10:34:05 fileserv2 kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Nov  8 10:34:05 fileserv2 kernel: PCI: Not using MMCONFIG.
Nov  8 10:34:05 fileserv2 kernel: PCI: Using configuration type 1
Nov  8 10:34:05 fileserv2 kernel: ACPI: Interpreter enabled
Nov  8 10:34:05 fileserv2 kernel: ACPI: Using IOAPIC for interrupt routing
Nov  8 10:34:05 fileserv2 kernel: ACPI: No dock devices found.
Nov  8 10:34:05 fileserv2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov  8 10:34:05 fileserv2 kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Nov  8 10:34:06 fileserv2 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov  8 10:34:06 fileserv2 kernel: pnp: PnP ACPI init
Nov  8 10:34:06 fileserv2 kernel: pnp: PnP ACPI: found 15 devices
Nov  8 10:34:06 fileserv2 kernel: usbcore: registered new driver usbfs
Nov  8 10:34:06 fileserv2 kernel: usbcore: registered new driver hub
Nov  8 10:34:06 fileserv2 kernel: PCI: Using ACPI for IRQ routing
Nov  8 10:34:06 fileserv2 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Nov  8 10:34:06 fileserv2 kernel: NetLabel: Initializing
Nov  8 10:34:06 fileserv2 kernel: NetLabel:  domain hash size = 128
Nov  8 10:34:06 fileserv2 kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Nov  8 10:34:06 fileserv2 kernel: NetLabel:  unlabeled traffic allowed by default
Nov  8 10:34:06 fileserv2 kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
Nov  8 10:34:06 fileserv2 kernel: hpet0: 4 64-bit timers, 14318180 Hz
Nov  8 10:34:06 fileserv2 kernel: ACPI: DMAR not present
Nov  8 10:34:06 fileserv2 kernel: PCI-GART: No AMD northbridge found.
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:06: ioport range 0x290-0x297 has been reserved
Nov  8 10:34:06 fileserv2 rpc.statd[2850]: Version 1.0.9 Starting
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
Nov  8 10:34:06 fileserv2 rpc.statd[2850]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user 
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:07: iomem range 0xffa00000-0xffafffff has been reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
Nov  8 10:34:06 fileserv2 kernel: pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
Nov  8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:01.0
Nov  8 10:34:06 fileserv2 kernel:   IO window: c000-cfff
Nov  8 10:34:06 fileserv2 kernel:   MEM window: fe900000-fe9fffff
Nov  8 10:34:06 fileserv2 kernel:   PREFETCH window 0x00000000d0000000-0x00000000dfffffff
Nov  8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:1c.0
Nov  8 10:34:06 fileserv2 kernel:   IO window: disabled.
Nov  8 10:34:06 fileserv2 kernel:   MEM window: disabled.
Nov  8 10:34:06 fileserv2 kernel:   PREFETCH window 0x00000000fdf00000-0x00000000fdffffff
Nov  8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:1c.4
Nov  8 10:34:06 fileserv2 kernel:   IO window: e000-efff
Nov  8 10:34:06 fileserv2 kernel:   MEM window: feb00000-febfffff
Nov  8 10:34:06 fileserv2 kernel:   PREFETCH window: disabled.
Nov  8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:1c.5
Nov  8 10:34:06 fileserv2 kernel:   IO window: d000-dfff
Nov  8 10:34:06 fileserv2 kernel:   MEM window: fea00000-feafffff
Nov  8 10:34:06 fileserv2 kernel:   PREFETCH window: disabled.
Nov  8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:1e.0
Nov  8 10:34:06 fileserv2 kernel:   IO window: disabled.
Nov  8 10:34:06 fileserv2 kernel:   MEM window: disabled.
Nov  8 10:34:06 fileserv2 kernel:   PREFETCH window: disabled.
Nov  8 10:34:06 fileserv2 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov  8 10:34:06 fileserv2 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 16 (level, low) -> IRQ 169
Nov  8 10:34:06 fileserv2 kernel: NET: Registered protocol family 2
Nov  8 10:34:06 fileserv2 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov  8 10:34:06 fileserv2 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Nov  8 10:34:06 fileserv2 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov  8 10:34:06 fileserv2 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Nov  8 10:34:06 fileserv2 kernel: TCP reno registered
Nov  8 10:34:06 fileserv2 kernel: audit: initializing netlink socket (disabled)
Nov  8 10:34:06 fileserv2 kernel: type=2000 audit(1320748401.436:1): initialized
Nov  8 10:34:06 fileserv2 kernel: Total HugeTLB memory allocated, 0
Nov  8 10:34:06 fileserv2 kernel: VFS: Disk quotas dquot_6.5.1
Nov  8 10:34:06 fileserv2 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov  8 10:34:06 fileserv2 kernel: Initializing Cryptographic API
Nov  8 10:34:06 fileserv2 kernel: alg: No test for crc32c (crc32c-generic)
Nov  8 10:34:06 fileserv2 kernel: ksign: Installing public key data
Nov  8 10:34:06 fileserv2 kernel: Loading keyring
Nov  8 10:34:06 fileserv2 kernel: - Added public key C099FB4D84A418B6
Nov  8 10:34:06 fileserv2 kernel: - User ID: CentOS (Kernel Module GPG key)
Nov  8 10:34:06 fileserv2 kernel: io scheduler noop registered
Nov  8 10:34:06 fileserv2 kernel: io scheduler anticipatory registered
Nov  8 10:34:06 fileserv2 kernel: io scheduler deadline registered
Nov  8 10:34:06 fileserv2 kernel: io scheduler cfq registered (default)
Nov  8 10:34:06 fileserv2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov  8 10:34:06 fileserv2 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
Nov  8 10:34:06 fileserv2 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
Nov  8 10:34:06 fileserv2 kernel: Real Time Clock Driver v1.12ac
Nov  8 10:34:06 fileserv2 kernel: Non-volatile memory driver v1.2
Nov  8 10:34:06 fileserv2 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov  8 10:34:06 fileserv2 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov  8 10:34:06 fileserv2 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov  8 10:34:06 fileserv2 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov  8 10:34:06 fileserv2 kernel: brd: module loaded
Nov  8 10:34:06 fileserv2 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov  8 10:34:06 fileserv2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov  8 10:34:06 fileserv2 kernel: ide-floppy driver 0.99.newide
Nov  8 10:34:06 fileserv2 kernel: usbcore: registered new driver hiddev
Nov  8 10:34:06 fileserv2 kernel: usbcore: registered new driver usbhid
Nov  8 10:34:06 fileserv2 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Nov  8 10:34:06 fileserv2 kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Nov  8 10:34:06 fileserv2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov  8 10:34:06 fileserv2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov  8 10:34:06 fileserv2 kernel: mice: PS/2 mouse device common for all mice
Nov  8 10:34:06 fileserv2 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov  8 10:34:06 fileserv2 kernel: md: bitmap version 4.39
Nov  8 10:34:06 fileserv2 kernel: TCP bic registered
Nov  8 10:34:06 fileserv2 kernel: Initializing IPsec netlink socket
Nov  8 10:34:06 fileserv2 kernel: NET: Registered protocol family 1
Nov  8 10:34:06 fileserv2 kernel: NET: Registered protocol family 17
Nov  8 10:34:06 fileserv2 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov  8 10:34:06 fileserv2 kernel: Initalizing network drop monitor service
Nov  8 10:34:06 fileserv2 kernel: Freeing unused kernel memory: 224k freed
Nov  8 10:34:06 fileserv2 kernel: Write protecting the kernel read-only data: 519k
Nov  8 10:34:06 fileserv2 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Nov  8 10:34:06 fileserv2 kernel: GSI 18 sharing vector 0xE1 and IRQ 18
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: debug port 1
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: irq 225, io mem 0xfe8ffc00
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov  8 10:34:06 fileserv2 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov  8 10:34:06 fileserv2 kernel: hub 1-0:1.0: USB hub found
Nov  8 10:34:06 fileserv2 kernel: hub 1-0:1.0: 6 ports detected
Nov  8 10:34:06 fileserv2 kernel: GSI 19 sharing vector 0xE9 and IRQ 19
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfe8ff800
Nov  8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov  8 10:34:06 fileserv2 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov  8 10:34:06 fileserv2 kernel: hub 2-0:1.0: USB hub found
Nov  8 10:34:06 fileserv2 kernel: hub 2-0:1.0: 6 ports detected
Nov  8 10:34:06 fileserv2 kernel: USB Universal Host Controller Interface driver v3.0
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov  8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Nov  8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Nov  8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000b800
Nov  8 10:34:06 fileserv2 kernel: usb usb3: configuration #1 chosen from 1 choice
Nov  8 10:34:06 fileserv2 kernel: hub 3-0:1.0: USB hub found
Nov  8 10:34:06 fileserv2 kernel: hub 3-0:1.0: 2 ports detected
Nov  8 10:34:06 fileserv2 kernel: GSI 20 sharing vector 0x32 and IRQ 20
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 50
Nov  8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Nov  8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Nov  8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.1: irq 50, io base 0x0000b880
Nov  8 10:34:06 fileserv2 kernel: usb usb4: configuration #1 chosen from 1 choice
Nov  8 10:34:06 fileserv2 kernel: hub 4-0:1.0: USB hub found
Nov  8 10:34:06 fileserv2 kernel: hub 4-0:1.0: 2 ports detected
Nov  8 10:34:06 fileserv2 kdump: kexec: loaded kdump kernel
Nov  8 10:34:06 fileserv2 kernel: input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Nov  8 10:34:06 fileserv2 kdump: started up
Nov  8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 225
Nov  8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Nov  8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1a.2: irq 225, io base 0x0000bc00
Nov  8 10:34:07 fileserv2 kernel: usb usb5: configuration #1 chosen from 1 choice
Nov  8 10:34:07 fileserv2 kernel: hub 5-0:1.0: USB hub found
Nov  8 10:34:07 fileserv2 kernel: hub 5-0:1.0: 2 ports detected
Nov  8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000b080
Nov  8 10:34:07 fileserv2 kernel: usb usb6: configuration #1 chosen from 1 choice
Nov  8 10:34:07 fileserv2 kernel: hub 6-0:1.0: USB hub found
Nov  8 10:34:07 fileserv2 kernel: hub 6-0:1.0: 2 ports detected
Nov  8 10:34:07 fileserv2 kernel: GSI 21 sharing vector 0x3A and IRQ 21
Nov  8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 58
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.1: irq 58, io base 0x0000b400
Nov  8 10:34:07 fileserv2 kernel: usb usb7: configuration #1 chosen from 1 choice
Nov  8 10:34:07 fileserv2 kernel: hub 7-0:1.0: USB hub found
Nov  8 10:34:07 fileserv2 kernel: hub 7-0:1.0: 2 ports detected
Nov  8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Nov  8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000b480
Nov  8 10:34:07 fileserv2 kernel: usb usb8: configuration #1 chosen from 1 choice
Nov  8 10:34:07 fileserv2 kernel: hub 8-0:1.0: USB hub found
Nov  8 10:34:07 fileserv2 kernel: hub 8-0:1.0: 2 ports detected
Nov  8 10:34:07 fileserv2 kernel: md: raid1 personality registered for level 1
Nov  8 10:34:07 fileserv2 kernel: SCSI subsystem initialized
Nov  8 10:34:07 fileserv2 kernel: GSI 22 sharing vector 0x42 and IRQ 22
Nov  8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 22 (level, low) -> IRQ 66
Nov  8 10:34:07 fileserv2 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Nov  8 10:34:07 fileserv2 kernel: scsi0 : ata_piix
Nov  8 10:34:07 fileserv2 kernel: scsi1 : ata_piix
Nov  8 10:34:07 fileserv2 hcid[3009]: Bluetooth HCI daemon
Nov  8 10:34:07 fileserv2 kernel: ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 66
Nov  8 10:34:07 fileserv2 kernel: ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 66
Nov  8 10:34:07 fileserv2 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  8 10:34:07 fileserv2 kernel: ata1.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov  8 10:34:07 fileserv2 sdpd[3013]: Bluetooth SDP daemon 
Nov  8 10:34:07 fileserv2 kernel: ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov  8 10:34:07 fileserv2 hcid[3009]: Register path:/org/bluez fallback:1
Nov  8 10:34:07 fileserv2 kernel: ata1.00: configured for UDMA/133
Nov  8 10:34:07 fileserv2 kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  8 10:34:07 fileserv2 kernel: ata2.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov  8 10:34:07 fileserv2 kernel: ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov  8 10:34:07 fileserv2 kernel: ata2.00: configured for UDMA/133
Nov  8 10:34:07 fileserv2 kernel:   Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
Nov  8 10:34:07 fileserv2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov  8 10:34:07 fileserv2 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 10:34:07 fileserv2 kernel: sda: Write Protect is off
Nov  8 10:34:07 fileserv2 kernel: SCSI device sda: drive cache: write back
Nov  8 10:34:07 fileserv2 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 10:34:07 fileserv2 kernel: sda: Write Protect is off
Nov  8 10:34:07 fileserv2 kernel: SCSI device sda: drive cache: write back
Nov  8 10:34:07 fileserv2 kernel:  sda: sda1 sda2 sda3 sda4 < sda5 >
Nov  8 10:34:07 fileserv2 kernel: sd 0:0:0:0: Attached scsi disk sda
Nov  8 10:34:07 fileserv2 kernel:   Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
Nov  8 10:34:07 fileserv2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 10:34:07 fileserv2 kernel: sdb: Write Protect is off
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdb: drive cache: write back
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 10:34:07 fileserv2 kernel: sdb: Write Protect is off
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdb: drive cache: write back
Nov  8 10:34:07 fileserv2 kernel:  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
Nov  8 10:34:07 fileserv2 kernel: sd 1:0:0:0: Attached scsi disk sdb
Nov  8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 22 (level, low) -> IRQ 66
Nov  8 10:34:07 fileserv2 kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Nov  8 10:34:07 fileserv2 kernel: scsi2 : ata_piix
Nov  8 10:34:07 fileserv2 kernel: scsi3 : ata_piix
Nov  8 10:34:07 fileserv2 kernel: ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 66
Nov  8 10:34:07 fileserv2 kernel: ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 66
Nov  8 10:34:07 fileserv2 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  8 10:34:07 fileserv2 kernel: ata3.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov  8 10:34:07 fileserv2 kernel: ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov  8 10:34:07 fileserv2 kernel: ata3.00: configured for UDMA/133
Nov  8 10:34:07 fileserv2 kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  8 10:34:07 fileserv2 pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
Nov  8 10:34:07 fileserv2 kernel: ata4.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov  8 10:34:07 fileserv2 kernel: ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov  8 10:34:07 fileserv2 kernel: ata4.00: configured for UDMA/133
Nov  8 10:34:07 fileserv2 kernel:   Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
Nov  8 10:34:07 fileserv2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 10:34:07 fileserv2 kernel: sdc: Write Protect is off
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdc: drive cache: write back
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 10:34:07 fileserv2 kernel: sdc: Write Protect is off
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdc: drive cache: write back
Nov  8 10:34:07 fileserv2 kernel:  sdc: sdc1
Nov  8 10:34:07 fileserv2 kernel: sd 2:0:0:0: Attached scsi disk sdc
Nov  8 10:34:07 fileserv2 kernel:   Vendor: ATA       Model: SAMSUNG HD502HI   Rev: 1AG0
Nov  8 10:34:07 fileserv2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 10:34:07 fileserv2 kernel: sdd: Write Protect is off
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdd: drive cache: write back
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
Nov  8 10:34:07 fileserv2 kernel: sdd: Write Protect is off
Nov  8 10:34:07 fileserv2 kernel: SCSI device sdd: drive cache: write back
Nov  8 10:34:07 fileserv2 kernel:  sdd: sdd1
Nov  8 10:34:07 fileserv2 kernel: sd 3:0:0:0: Attached scsi disk sdd
Nov  8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov  8 10:34:07 fileserv2 kernel: scsi4 : pata_marvell
Nov  8 10:34:07 fileserv2 kernel: scsi5 : pata_marvell
Nov  8 10:34:07 fileserv2 kernel: ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 169
Nov  8 10:34:07 fileserv2 kernel: ata6: DUMMY
Nov  8 10:34:07 fileserv2 kernel: ata5.00: ATAPI: Optiarc DVD RW AD-5200A, 1.09, max UDMA/66
Nov  8 10:34:07 fileserv2 kernel: ata5.00: configured for UDMA/66
Nov  8 10:34:07 fileserv2 pcscd: hotplug_libusb.c:402:HPEstablishUSBNotifications() Driver ifd-egate.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
Nov  8 10:34:07 fileserv2 kernel:   Vendor: Optiarc   Model: DVD RW AD-5200A   Rev: 1.09
Nov  8 10:34:07 fileserv2 pcscd: hotplug_libusb.c:411:HPEstablishUSBNotifications() Polling forced every 1 second(s)
Nov  8 10:34:07 fileserv2 kernel:   Type:   CD-ROM                             ANSI SCSI revision: 05
Nov  8 10:34:07 fileserv2 kernel: device-mapper: uevent: version 1.0.3
Nov  8 10:34:07 fileserv2 kernel: device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
Nov  8 10:34:07 fileserv2 kernel: device-mapper: dm-raid45: initialized v0.2594l
Nov  8 10:34:07 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov  8 10:34:07 fileserv2 kernel: md: autorun ...
Nov  8 10:34:07 fileserv2 kernel: md: considering sdd1 ...
Nov  8 10:34:07 fileserv2 kernel: md:  adding sdd1 ...
Nov  8 10:34:07 fileserv2 kernel: md:  adding sdc1 ...
Nov  8 10:34:07 fileserv2 kernel: md: sdb5 has different UUID to sdd1
Nov  8 10:34:07 fileserv2 kernel: md: sdb3 has different UUID to sdd1
Nov  8 10:34:07 fileserv2 kernel: md: sdb2 has different UUID to sdd1
Nov  8 10:34:08 fileserv2 kernel: md: sdb1 has different UUID to sdd1
Nov  8 10:34:08 fileserv2 kernel: md: sda5 has different UUID to sdd1
Nov  8 10:34:08 fileserv2 kernel: md: sda3 has different UUID to sdd1
Nov  8 10:34:08 fileserv2 kernel: md: sda2 has different UUID to sdd1
Nov  8 10:34:08 fileserv2 kernel: md: sda1 has different UUID to sdd1
Nov  8 10:34:08 fileserv2 kernel: md: created md4
Nov  8 10:34:08 fileserv2 kernel: md: bind<sdc1>
Nov  8 10:34:08 fileserv2 kernel: md: bind<sdd1>
Nov  8 10:34:08 fileserv2 kernel: md: running: <sdd1><sdc1>
Nov  8 10:34:08 fileserv2 kernel: raid1: raid set md4 active with 2 out of 2 mirrors
Nov  8 10:34:08 fileserv2 kernel: md: considering sdb5 ...
Nov  8 10:34:08 fileserv2 kernel: md:  adding sdb5 ...
Nov  8 10:34:08 fileserv2 kernel: md: sdb3 has different UUID to sdb5
Nov  8 10:34:08 fileserv2 kernel: md: sdb2 has different UUID to sdb5
Nov  8 10:34:08 fileserv2 kernel: md: sdb1 has different UUID to sdb5
Nov  8 10:34:08 fileserv2 kernel: md:  adding sda5 ...
Nov  8 10:34:08 fileserv2 kernel: md: sda3 has different UUID to sdb5
Nov  8 10:34:08 fileserv2 kernel: md: sda2 has different UUID to sdb5
Nov  8 10:34:08 fileserv2 kernel: md: sda1 has different UUID to sdb5
Nov  8 10:34:08 fileserv2 kernel: md: created md3
Nov  8 10:34:08 fileserv2 kernel: md: bind<sda5>
Nov  8 10:34:08 fileserv2 kernel: md: bind<sdb5>
Nov  8 10:34:08 fileserv2 kernel: md: running: <sdb5><sda5>
Nov  8 10:34:08 fileserv2 kernel: raid1: raid set md3 active with 2 out of 2 mirrors
Nov  8 10:34:08 fileserv2 kernel: md: considering sdb3 ...
Nov  8 10:34:08 fileserv2 kernel: md:  adding sdb3 ...
Nov  8 10:34:08 fileserv2 kernel: md: sdb2 has different UUID to sdb3
Nov  8 10:34:08 fileserv2 kernel: md: sdb1 has different UUID to sdb3
Nov  8 10:34:08 fileserv2 kernel: md:  adding sda3 ...
Nov  8 10:34:08 fileserv2 kernel: md: sda2 has different UUID to sdb3
Nov  8 10:34:08 fileserv2 kernel: md: sda1 has different UUID to sdb3
Nov  8 10:34:08 fileserv2 kernel: md: created md1
Nov  8 10:34:08 fileserv2 kernel: md: bind<sda3>
Nov  8 10:34:08 fileserv2 kernel: md: bind<sdb3>
Nov  8 10:34:08 fileserv2 kernel: md: running: <sdb3><sda3>
Nov  8 10:34:08 fileserv2 kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Nov  8 10:34:08 fileserv2 kernel: md: considering sdb2 ...
Nov  8 10:34:08 fileserv2 kernel: md:  adding sdb2 ...
Nov  8 10:34:08 fileserv2 kernel: md: sdb1 has different UUID to sdb2
Nov  8 10:34:08 fileserv2 kernel: md:  adding sda2 ...
Nov  8 10:34:08 fileserv2 kernel: md: sda1 has different UUID to sdb2
Nov  8 10:34:08 fileserv2 kernel: md: created md2
Nov  8 10:34:08 fileserv2 kernel: md: bind<sda2>
Nov  8 10:34:08 fileserv2 kernel: md: bind<sdb2>
Nov  8 10:34:08 fileserv2 kernel: md: running: <sdb2><sda2>
Nov  8 10:34:08 fileserv2 kernel: raid1: raid set md2 active with 2 out of 2 mirrors
Nov  8 10:34:08 fileserv2 kernel: md: considering sdb1 ...
Nov  8 10:34:08 fileserv2 kernel: md:  adding sdb1 ...
Nov  8 10:34:08 fileserv2 kernel: md:  adding sda1 ...
Nov  8 10:34:08 fileserv2 kernel: md: created md0
Nov  8 10:34:08 fileserv2 kernel: md: bind<sda1>
Nov  8 10:34:08 fileserv2 kernel: md: bind<sdb1>
Nov  8 10:34:08 fileserv2 kernel: md: running: <sdb1><sda1>
Nov  8 10:34:08 fileserv2 kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Nov  8 10:34:08 fileserv2 kernel: md: ... autorun DONE.
Nov  8 10:34:08 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov  8 10:34:08 fileserv2 kernel: md: autorun ...
Nov  8 10:34:08 fileserv2 kernel: md: ... autorun DONE.
Nov  8 10:34:08 fileserv2 kernel: kjournald starting.  Commit interval 5 seconds
Nov  8 10:34:08 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov  8 10:34:08 fileserv2 kernel: SELinux:  Disabled at runtime.
Nov  8 10:34:08 fileserv2 kernel: type=1404 audit(1320748426.753:2): selinux=0 auid=4294967295 ses=4294967295
Nov  8 10:34:08 fileserv2 kernel: input: PC Speaker as /class/input/input2
Nov  8 10:34:08 fileserv2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov  8 10:34:08 fileserv2 kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Nov  8 10:34:08 fileserv2 kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Nov  8 10:34:08 fileserv2 kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0
Nov  8 10:34:08 fileserv2 kernel: scsi 4:0:0:0: Attached scsi generic sg4 type 5
Nov  8 10:34:08 fileserv2 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov  8 10:34:08 fileserv2 kernel: sky2 driver version 1.22
Nov  8 10:34:08 fileserv2 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Nov  8 10:34:08 fileserv2 kernel: sky2 0000:02:00.0: v1.22 addr 0xfeafc000 irq 177 Yukon-2 EC Ultra rev 3
Nov  8 10:34:08 fileserv2 kernel: sky2 eth0: addr 00:1f:c6:1e:c8:d3
Nov  8 10:34:08 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 225
Nov  8 10:34:08 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 66
Nov  8 10:34:08 fileserv2 kernel: hda_codec: ALC883: BIOS auto-probing.
Nov  8 10:34:08 fileserv2 kernel: ACPI: PCI Interrupt 0000:01:00.1[b] -> GSI 17 (level, low) -> IRQ 177
Nov  8 10:34:08 fileserv2 kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Nov  8 10:34:08 fileserv2 kernel: Uniform CD-ROM driver Revision: 3.20
Nov  8 10:34:08 fileserv2 kernel: floppy0: no floppy controllers found
Nov  8 10:34:08 fileserv2 kernel: work still pending
Nov  8 10:34:08 fileserv2 kernel: lp: driver loaded but no devices found
Nov  8 10:34:08 fileserv2 kernel: ACPI: Power Button (FF) [PWRF]
Nov  8 10:34:08 fileserv2 kernel: ACPI: Power Button (CM) [PWRB]
Nov  8 10:34:08 fileserv2 kernel: ACPI: Mapper loaded
Nov  8 10:34:08 fileserv2 kernel: dell-wmi: No known WMI GUID found
Nov  8 10:34:08 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov  8 10:34:08 fileserv2 kernel: md: autorun ...
Nov  8 10:34:08 fileserv2 kernel: md: ... autorun DONE.
Nov  8 10:34:08 fileserv2 kernel: device-mapper: multipath: version 1.0.5 loaded
Nov  8 10:34:08 fileserv2 kernel: device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Nov  8 10:34:08 fileserv2 kernel: device-mapper: ioctl: error adding target to table
Nov  8 10:34:08 fileserv2 kernel: device-mapper: ioctl: device doesn't appear to be in the dev hash table.
Nov  8 10:34:08 fileserv2 kernel: EXT3 FS on md2, internal journal
Nov  8 10:34:08 fileserv2 kernel: kjournald starting.  Commit interval 5 seconds
Nov  8 10:34:08 fileserv2 kernel: EXT3 FS on md4, internal journal
Nov  8 10:34:08 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov  8 10:34:08 fileserv2 kernel: kjournald starting.  Commit interval 5 seconds
Nov  8 10:34:08 fileserv2 kernel: EXT3 FS on md3, internal journal
Nov  8 10:34:08 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov  8 10:34:08 fileserv2 kernel: kjournald starting.  Commit interval 5 seconds
Nov  8 10:34:08 fileserv2 kernel: EXT3 FS on md0, internal journal
Nov  8 10:34:08 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov  8 10:34:08 fileserv2 kernel: Adding 1020024k swap on /dev/md1.  Priority:-1 extents:1 across:1020024k
Nov  8 10:34:08 fileserv2 kernel: IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
Nov  8 10:34:08 fileserv2 kernel: microcode: CPU1 updated from revision 0x60c to 0x60f, date = 09292010 
Nov  8 10:34:08 fileserv2 kernel: microcode: CPU0 updated from revision 0x60c to 0x60f, date = 09292010 
Nov  8 10:34:08 fileserv2 kernel: Loading iSCSI transport class v2.0-871.
Nov  8 10:34:08 fileserv2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Nov  8 10:34:08 fileserv2 kernel: All bugs added by David S. Miller <davem@redhat.com>
Nov  8 10:34:08 fileserv2 kernel: cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
Nov  8 10:34:08 fileserv2 kernel: iscsi: registered transport (cxgb3i)
Nov  8 10:34:08 fileserv2 kernel: NET: Registered protocol family 10
Nov  8 10:34:08 fileserv2 kernel: lo: Disabled Privacy Extensions
Nov  8 10:34:08 fileserv2 kernel: IPv6 over IPv4 tunneling driver
Nov  8 10:34:08 fileserv2 kernel: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
Nov  8 10:34:08 fileserv2 kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
Nov  8 10:34:08 fileserv2 kernel: iscsi: registered transport (bnx2i)
Nov  8 10:34:08 fileserv2 kernel: iscsi: registered transport (tcp)
Nov  8 10:34:08 fileserv2 kernel: iscsi: registered transport (iser)
Nov  8 10:34:08 fileserv2 kernel: iscsi: registered transport (be2iscsi)
Nov  8 10:34:09 fileserv2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov  8 10:34:09 fileserv2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov  8 10:34:09 fileserv2 kernel: Netfilter messages via NETLINK v0.30.
Nov  8 10:34:09 fileserv2 kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
Nov  8 10:34:09 fileserv2 kernel: sky2 eth0: enabling interface
Nov  8 10:34:09 fileserv2 kernel: sky2 eth0: ram buffer 0K
Nov  8 10:34:09 fileserv2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov  8 10:34:09 fileserv2 kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Nov  8 10:34:09 fileserv2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov  8 10:34:09 fileserv2 kernel: Bluetooth: Core ver 2.10
Nov  8 10:34:09 fileserv2 kernel: NET: Registered protocol family 31
Nov  8 10:34:09 fileserv2 kernel: Bluetooth: HCI device and connection manager initialized
Nov  8 10:34:09 fileserv2 kernel: Bluetooth: HCI socket layer initialized
Nov  8 10:34:09 fileserv2 kernel: Bluetooth: L2CAP ver 2.8
Nov  8 10:34:09 fileserv2 kernel: Bluetooth: L2CAP socket layer initialized
Nov  8 10:34:09 fileserv2 kernel: Bluetooth: RFCOMM socket layer initialized
Nov  8 10:34:09 fileserv2 kernel: Bluetooth: RFCOMM TTY layer initialized
Nov  8 10:34:09 fileserv2 kernel: Bluetooth: RFCOMM ver 1.8
Nov  8 10:34:09 fileserv2 kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Nov  8 10:34:09 fileserv2 hidd[3170]: Bluetooth HID daemon
Nov  8 10:34:11 fileserv2 automount[3214]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
Nov  8 10:34:11 fileserv2 hpiod: 1.6.7 accepting connections at 2208... 
Nov  8 10:34:12 fileserv2 xinetd[3292]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Nov  8 10:34:12 fileserv2 xinetd[3292]: Started working: 0 available services
Nov  8 10:34:13 fileserv2 gpm[3338]: *** info [startup.c(95)]: 
Nov  8 10:34:13 fileserv2 gpm[3338]: Started gpm successfully. Entered daemon mode.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Successfully dropped root privileges.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: avahi-daemon 0.6.16 starting up.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Successfully called chroot().
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Successfully dropped remaining capabilities.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: No service found in /etc/avahi/services.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: New relevant interface eth0.IPv6 for mDNS.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21f:c6ff:fe1e:c8d3.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: New relevant interface eth0.IPv4 for mDNS.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.208.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Network interface enumeration completed.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Registering new address record for fe80::21f:c6ff:fe1e:c8d3 on eth0.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Registering new address record for 192.168.0.208 on eth0.
Nov  8 10:34:14 fileserv2 avahi-daemon[3465]: Registering HINFO record with values 'X86_64'/'LINUX'.
Nov  8 10:34:14 fileserv2 smartd[3495]: smartd version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen 
Nov  8 10:34:14 fileserv2 smartd[3495]: Home page is http://smartmontools.sourceforge.net/  
Nov  8 10:34:14 fileserv2 smartd[3495]: Opened configuration file /etc/smartd.conf 
Nov  8 10:34:14 fileserv2 smartd[3495]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices 
Nov  8 10:34:14 fileserv2 smartd[3495]: Problem creating device name scan list 
Nov  8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sda, opened 
Nov  8 10:34:14 fileserv2 smartd[3495]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. 
Nov  8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sda, opened 
Nov  8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sda, found in smartd database. 
Nov  8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
Nov  8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sdb, opened 
Nov  8 10:34:14 fileserv2 smartd[3495]: Device /dev/sdb: using '-d sat' for ATA disk behind SAT layer. 
Nov  8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sdb, opened 
Nov  8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sdb, found in smartd database. 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdc, opened 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device /dev/sdc: using '-d sat' for ATA disk behind SAT layer. 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdc, opened 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdc, found in smartd database. 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list. 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdd, opened 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device /dev/sdd: using '-d sat' for ATA disk behind SAT layer. 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdd, opened 
Nov  8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdd, found in smartd database. 
Nov  8 10:34:15 fileserv2 avahi-daemon[3465]: Server startup complete. Host name is fileserv2.local. Local service cookie is 3859607675.
Nov  8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list. 
Nov  8 10:34:15 fileserv2 smartd[3495]: Monitoring 0 ATA and 4 SCSI devices 
Nov  8 10:34:15 fileserv2 smartd[3497]: smartd has fork()ed into background mode. New PID=3497. 
Nov  8 10:52:28 fileserv2 smbd[3406]: [2011/11/08 10:52:28, 0] lib/util_sock.c:get_peer_addr(1224) 
Nov  8 10:52:28 fileserv2 smbd[3406]:   getpeername failed. Error was Конечная точка передачи не подсоединена 
Nov  8 10:52:28 fileserv2 smbd[3817]: [2011/11/08 10:52:28, 0] lib/util_sock.c:get_peer_addr(1224) 
Nov  8 10:52:28 fileserv2 smbd[3817]:   getpeername failed. Error was Конечная точка передачи не подсоединена 
Nov  8 10:52:28 fileserv2 smbd[3817]: [2011/11/08 10:52:28, 0] lib/util_sock.c:write_data(562) 
Nov  8 10:52:28 fileserv2 smbd[3817]:   write_data: write failure in writing to client 0.0.0.0. Error Соединение сброшено другой стороной 
Nov  8 10:52:28 fileserv2 smbd[3817]: [2011/11/08 10:52:28, 0] lib/util_sock.c:send_smb(761) 
Nov  8 10:52:28 fileserv2 smbd[3817]:   Error writing 4 bytes to client. -1. (Соединение сброшено другой стороной) 
Nov  8 10:55:18 fileserv2 shutdown[3833]: shutting down for system reboot
Nov  8 10:55:19 fileserv2 smartd[3497]: smartd received signal 15: Terminated 
Nov  8 10:55:19 fileserv2 smartd[3497]: smartd is exiting (exit status 0) 
Nov  8 10:55:19 fileserv2 avahi-daemon[3465]: Got SIGTERM, quitting.
Nov  8 10:55:19 fileserv2 avahi-daemon[3465]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21f:c6ff:fe1e:c8d3.
Nov  8 10:55:19 fileserv2 avahi-daemon[3465]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.208.
Nov  8 10:55:23 fileserv2 nmbd[3409]: [2011/11/08 10:55:23, 0] nmbd/nmbd.c:terminate(58) 
Nov  8 10:55:23 fileserv2 nmbd[3409]:   Got SIGTERM: going down... 
Nov  8 10:55:23 fileserv2 xinetd[3292]: Exiting...
Nov  8 10:55:27 fileserv2 hcid[3009]: Got disconnected from the system message bus
Nov  8 10:55:27 fileserv2 rpc.statd[2850]: Caught signal 15, un-registering and exiting.
Nov  8 10:55:27 fileserv2 auditd[2677]: The audit daemon is exiting.
Nov  8 10:55:27 fileserv2 kernel: audit(1320731727.840:35): audit_pid=0 old=2677 by auid=4294967295
Nov  8 10:55:28 fileserv2 pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide
Nov  8 10:55:28 fileserv2 pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped
Nov  8 10:55:29 fileserv2 pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function
Nov  8 10:55:29 fileserv2 pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run
Nov  8 10:55:29 fileserv2 kernel: Kernel logging (proc) stopped.
Nov  8 10:55:29 fileserv2 kernel: Kernel log daemon terminating.
Nov  8 10:55:30 fileserv2 exiting on signal 15
Nov  8 10:57:02 fileserv2 syslogd 1.4.1: restart.
Nov  8 10:57:02 fileserv2 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov  8 10:57:02 fileserv2 kernel: Linux version 2.6.18-238.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jan 13 15:51:15 EST 2011
Nov  8 10:57:02 fileserv2 kernel: Command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov  8 10:57:02 fileserv2 kernel: BIOS-provided physical RAM map:
Nov  8 10:57:02 fileserv2 kernel:  BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
Nov  8 10:57:02 fileserv2 kernel:  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Nov  8 10:57:02 fileserv2 kernel:  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov  8 10:57:02 fileserv2 kernel:  BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
Nov  8 10:57:02 fileserv2 kernel:  BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
Nov  8 10:57:02 fileserv2 kernel:  BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
Nov  8 10:57:02 fileserv2 kernel:  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
Nov  8 10:57:02 fileserv2 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov  8 10:57:02 fileserv2 kernel:  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Nov  8 10:57:02 fileserv2 kernel: DMI 2.4 present.
Nov  8 10:57:02 fileserv2 kernel: No NUMA configuration found
Nov  8 10:57:02 fileserv2 cpuspeed: Enabling ondemand cpu frequency scaling governor
Nov  8 10:57:02 fileserv2 kernel: Faking a node at 0000000000000000-000000007ff80000
Nov  8 10:57:02 fileserv2 kernel: Bootmem setup node 0 0000000000000000-000000007ff80000
Nov  8 10:57:02 fileserv2 kernel: ACPI: PM-Timer IO Port: 0x808
Nov  8 10:57:02 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov  8 10:57:02 fileserv2 kernel: Processor #0 7:7 APIC version 20
Nov  8 10:57:02 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov  8 10:57:02 fileserv2 kernel: Processor #1 7:7 APIC version 20
Nov  8 10:57:02 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov  8 10:57:02 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov  8 10:57:02 fileserv2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov  8 10:57:02 fileserv2 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov  8 10:57:02 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov  8 10:57:02 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov  8 10:57:02 fileserv2 kernel: Setting APIC routing to physical flat
Nov  8 10:57:02 fileserv2 kernel: ACPI: HPET id: 0x8086a301 base: 0xfed00000
Nov  8 10:57:02 fileserv2 kernel: Using ACPI (MADT) for SMP configuration information
Nov  8 10:57:02 fileserv2 kernel: Nosave address range: 000000000009d000 - 000000000009e000
Nov  8 10:57:02 fileserv2 kernel: Nosave address range: 000000000009e000 - 00000000000a0000
Nov  8 10:57:02 fileserv2 kernel: Nosave address range: 00000000000a0000 - 00000000000e4000
Nov  8 10:57:02 fileserv2 kernel: Nosave address range: 00000000000e4000 - 0000000000100000
Nov  8 10:57:02 fileserv2 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
Nov  8 10:57:02 fileserv2 kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Nov  8 10:57:02 fileserv2 kernel: Built 1 zonelists.  Total pages: 515389
Nov  8 10:57:02 fileserv2 kernel: Kernel command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov  8 10:57:02 fileserv2 kernel: Initializing CPU#0
Nov  8 10:57:02 fileserv2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Nov  8 10:57:02 fileserv2 kernel: Console: colour VGA+ 80x25
Nov  8 10:57:02 fileserv2 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov  8 10:57:02 fileserv2 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov  8 10:57:02 fileserv2 kernel: Checking aperture...
Nov  8 10:57:02 fileserv2 kernel: ACPI: DMAR not present
Nov  8 10:57:02 fileserv2 kernel: Memory: 1924332k/2096640k available (2592k kernel code, 171848k reserved, 1649k data, 224k init)
Nov  8 10:57:02 fileserv2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.45 BogoMIPS (lpj=2672726)
Nov  8 10:57:02 fileserv2 kernel: Security Framework v1.0.0 initialized
Nov  8 10:57:02 fileserv2 kernel: SELinux:  Initializing.
Nov  8 10:57:02 fileserv2 kernel: selinux_register_security:  Registering secondary module capability
Nov  8 10:57:02 fileserv2 kernel: Capability LSM initialized as secondary
Nov  8 10:57:02 fileserv2 kernel: Mount-cache hash table entries: 256
Nov  8 10:57:02 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov  8 10:57:02 fileserv2 kernel: CPU: L2 cache: 3072K
Nov  8 10:57:02 fileserv2 kernel: using mwait in idle threads.
Nov  8 10:57:02 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov  8 10:57:02 fileserv2 kernel: CPU: Processor Core ID: 0
Nov  8 10:57:02 fileserv2 kernel: CPU0: Thermal monitoring enabled (TM2)
Nov  8 10:57:02 fileserv2 kernel: SMP alternatives: switching to UP code
Nov  8 10:57:02 fileserv2 kernel: ACPI: Core revision 20060707
Nov  8 10:57:02 fileserv2 kernel: Using local APIC timer interrupts.
Nov  8 10:57:02 fileserv2 kernel: Detected 16.704 MHz APIC timer.
Nov  8 10:57:02 fileserv2 kernel: SMP alternatives: switching to SMP code
Nov  8 10:57:02 fileserv2 kernel: Booting processor 1/2 APIC 0x1
Nov  8 10:57:02 fileserv2 kernel: Initializing CPU#1
Nov  8 10:57:02 fileserv2 kernel: Calibrating delay using timer specific routine.. 5345.41 BogoMIPS (lpj=2672708)
Nov  8 10:57:02 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov  8 10:57:02 fileserv2 kernel: CPU: L2 cache: 3072K
Nov  8 10:57:02 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov  8 10:57:03 fileserv2 kernel: CPU: Processor Core ID: 1
Nov  8 10:57:03 fileserv2 kernel: CPU1: Thermal monitoring enabled (TM2)
Nov  8 10:57:03 fileserv2 rpc.statd[2849]: Version 1.0.9 Starting
Nov  8 10:57:03 fileserv2 kernel: Intel(R) Core(TM)2 Duo CPU     E7300  @ 2.66GHz stepping 06
Nov  8 10:57:03 fileserv2 kernel: Brought up 2 CPUs
Nov  8 10:57:03 fileserv2 kernel: NMI watchdog testing PASSED.
Nov  8 10:57:03 fileserv2 kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
Nov  8 10:57:03 fileserv2 kernel: time.c: Detected 2672.726 MHz processor.
Nov  8 10:57:03 fileserv2 rpc.statd[2849]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user

15 Ответ от i2ks

  • i2ks
  • Участник Форума
  • Неактивен
  • Зарегистрирован: 20.02.2010
  • Сообщений: 6,983
  • Репутация : [ 101 | 1 ]
Dee пишет:

Nov  8 08:08:05 fileserv2 kernel: device-mapper: multipath: version 1.0.5 loaded
Nov  8 08:08:05 fileserv2 kernel: device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Nov  8 08:08:05 fileserv2 kernel: device-mapper: ioctl: error adding target to table
Nov  8 08:08:05 fileserv2 kernel: device-mapper: ioctl: device doesn't appear to be in the dev hash table.

О как, что то с дисками, надо гуглить

It is good day to die ...
MS Windows 10
Заметки о главном...

16 Ответ от Dee

  • Dee
  • Посетитель
  • Неактивен
  • Зарегистрирован: 09.11.2011
  • Сообщений: 8
  • Репутация : [ 0 | 0 ]

Увы, замена памяти не помогла!!!( Также заменил БП - тоже без результата. Попробовал подключить обычный 160 гб Sata Samsung - отформатил как обычный линукс раздел с файловой EXT3, с рейда копирование на этот винт в 95% давало битый фаил, а вот манипуляции копирования на самсунге проходят успешно, битые файлы не появляются. Стоит только опять начать копировать внутри рейда - файлы с тем же успехом повреждаются (мелкие файлы до 200 мб копируются нормально). Пробовал копировать большие файлы забитые нулями размера 3гб - копирование внутри рейда проходит без повреждений, контр. сумма - совпадает. Непойму что за мистика, помогите разобраться..((

17 Ответ от Vadimsky

  • Vadimsky
  • Vadimsky
  • Философ
  • Неактивен
  • Откуда: Тула
  • Зарегистрирован: 21.02.2010
  • Сообщений: 2,913
  • Репутация : [ 61 | 2 ]

Как вариант попробуйте в каждом рейде выдернуть сначала по одному диску (скажем 1 и 3) и попробовать что то скопировать с одного рейда (точнее того что от него останется) на другой, потом эти диски вставить и выдернуть другие (2 и 4) и повторить операцию.
Если проблема в винтах так вы её найдёте, если проблема в рейде - тоже сразу будет видно.

Истина ускользает от тех кто отказывается её видеть обоими глазами.
Талантам нужно помогать, бездарности пробьются сами.
В Туле настолько суровые парни, что вместо пены для бритья, используют пену монтажную.
cat /broken/hands > /dev/null

18 Ответ от beza2000

  • beza2000
  • Посетитель
  • Неактивен
  • Зарегистрирован: 07.06.2011
  • Сообщений: 3
  • Репутация : [ 0 | 0 ]

И всё таки поменять шлейфы к дискам - на новые.