Nov 24 15:01:01 localhost crond(pam_unix)[2679]: session opened for user root by (uid=0)
Nov 24 15:01:01 localhost crond(pam_unix)[2679]: session closed for user root
Nov 24 15:01:47 localhost xinetd[2023]: Exiting...
Nov 24 15:01:47 localhost xinetd: xinetd shutdown succeeded
Nov 24 15:12:21 localhost xinetd[2743]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Nov 24 15:12:21 localhost xinetd[2743]: Started working: 0 available services
Nov 24 15:12:21 localhost xinetd: xinetd startup succeeded
Nov 24 15:12:33 localhost vsftpd: vsftpd shutdown failed
Nov 24 15:12:33 localhost vsftpd: vsftpd vsftpd succeeded
Nov 24 15:23:11 localhost xinetd[2743]: Exiting...
Nov 24 15:23:11 localhost xinetd: xinetd shutdown succeeded
Nov 24 15:40:02 localhost xinetd: xinetd startup succeeded
Nov 24 15:40:02 localhost xinetd[2841]: Bad log_on_failure flag: RECORD [file=/etc/xinetd.conf] [line=25]
Nov 24 15:40:02 localhost xinetd[2841]: Error parsing attribute log_on_failure - DISABLING SERVICE [file=/etc/xinetd.conf] [line=25]
Nov 24 15:40:02 localhost xinetd[2841]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Nov 24 15:40:02 localhost xinetd[2841]: Started working: 0 available services
Nov 24 15:40:08 localhost vsftpd: vsftpd shutdown failed
Nov 24 15:40:08 localhost vsftpd: vsftpd vsftpd succeeded
Nov 24 15:41:06 localhost sshd(pam_unix)[2863]: session opened for user ftpuser by (uid=0)
Nov 24 15:41:06 localhost sshd(pam_unix)[2863]: session closed for user ftpuser
Nov 24 15:41:12 localhost sshd(pam_unix)[2867]: session opened for user ftpuser by (uid=0)
Nov 24 15:41:12 localhost sshd(pam_unix)[2867]: session closed for user ftpuser

Nov 24 14:47:55 localhost sshd[2012]: Server listening on :: port 22.
Nov 24 14:47:55 localhost sshd[2012]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
Nov 24 14:55:03 localhost sshd[2605]: Accepted password for root from ::ffff:192.168.54.1 port 1118 ssh2
Nov 24 15:41:06 localhost sshd[2861]: Accepted password for ftpuser from ::ffff:192.168.54.1 port 1330 ssh2
Nov 24 15:41:06 localhost sshd[2863]: subsystem request for sftp
Nov 24 15:41:12 localhost sshd[2865]: Accepted password for ftpuser from ::ffff:192.168.54.1 port 1331 ssh2
Nov 24 15:41:12 localhost sshd[2867]: subsystem request for sftp

# Simple configuration file for xinetd
#
# Some defaults, and include /etc/xinetd.d/

defaults
{
        instances               = 60
        log_type                = SYSLOG authpriv
        log_on_success          = HOST PID
        log_on_failure          = HOST
        cps                     = 25 30
}

includedir /etc/xinetd.d

service vsftpd
{
socket_type             = stream
wait                    = no
user                    = root
server                  = /etc/rc.d/init.d/vsftpd
instances               = UNLIMITED
log_on_success  = DURATION USERID HOST EXIT
log_on_failure = USERID ATTEMPT RECORD HOST
nice                            = 10

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
#anonymous_enable=YES
#anon_root=/tmp/ftp
#no_anon_password=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES
#
one_process_model=NO
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to VSFTPD service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES

pam_service_name=vsftpd
userlist_enable=YES
#enable for standalone mode
listen=YES
tcp_wrappers=YES
#user_config_dir=/etc/vsftpd/userconf
dirmessage_enable=YES
hide_ids=YES
log_ftp_protocol=YES
#passwd_chroot_enable=YES
syslog_enable=YES
cmds_allowed=ABOR,CDUP,CWD,HELP,LIST,MDTM,MKD,NLST,NOOP,PASV,PORT,PWD,QUIT,REIN,REST,RETR,SIZE,STOR,APPE,SYST,TYPE
#guest_enable=YES
#guest_username=ftpuser
#no_log_lock=YES
dual_log_enable=YES
#pasv_enable=YES
ssl_enable=YES
ssl_tlsv1=YES
ssl_sslv2=NO
ssl_sslv3=NO
rsa_cert_file=/etc/vsftpd/vsftpd.pem
force_local_data_ssl=NO
force_local_logins_ssl=YES
#rsa_private_key_file=/etc/vsftpd/vsftpd.pem