127.0.0.1       localhost

# special IPv6 addresses
#::1             localhost ipv6-localhost ipv6-loopback

fe00::0         ipv6-localnet

ff00::0         ipv6-mcastprefix
ff02::1         ipv6-allnodes
ff02::2         ipv6-allrouters
ff02::3         ipv6-allhosts
127.0.0.2       1.myhost.ru
192.168.10.7    1.myhost.ru
194.186.251.138 1.myhost.ru

# The following options will be passed to all MySQL clients
[client]
#password       = your_password
port            = 3306
socket          = /var/lib/mysql/mysql.sock
default-character-set=utf8

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port            = 3306
socket          = /var/lib/mysql/mysql.sock
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
default-character-set=utf8

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
# log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id       = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir         = /tmp/
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/lib/mysql/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /var/lib/mysql/
#innodb_log_arch_dir = /var/lib/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

# The safe_mysqld script
[safe_mysqld]
log-error=/var/lib/mysql/mysqld.log

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
default-character-set=utf8
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld_multi]
mysqld     = /usr/bin/mysqld_safe
mysqladmin = /usr/bin/mysqladmin
log        = /var/log/mysqld_multi.log
# user       = multi_admin
# password   = secret

# If you want to use mysqld_multi uncomment 1 or more mysqld sections
# below or add your own ones.

# WARNING
# --------
# If you uncomment mysqld1 than make absolutely sure, that database mysql,
# configured above, is not started.  This may result in corrupted data!
# [mysqld1]
# port       = 3306
# datadir    = /var/lib/mysql
# pid-file   = /var/lib/mysql/mysqld.pid
# socket     = /var/lib/mysql/mysql.sock
# user       = mysql

# [mysqld2]
# port       = 3307
# datadir    = /var/lib/mysql-databases/mysqld2
# pid-file   = /var/lib/mysql-databases/mysqld2/mysql.pid
# socket     = /var/lib/mysql-databases/mysqld2/mysql.sock
# user       = mysql

# [mysqld3]
# port       = 3308
# datadir    = /var/lib/mysql-databases/mysqld3
# pid-file   = /var/lib/mysql-databases/mysqld3/mysql.pid
# socket     = /var/lib/mysql-databases/mysqld3/mysql.sock
# user       = mysql

# [mysqld6]
# port       = 3309
# datadir    = /var/lib/mysql-databases/mysqld6
# pid-file   = /var/lib/mysql-databases/mysqld6/mysql.pid
# socket     = /var/lib/mysql-databases/mysqld6/mysql.sock
# user       = mysql