• Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

Всем хороших выходных!
Посоветуйте ,может кто подскажет как заставить работать сканер в МФУ Xerox workcentre pe 220.
Принтер работает без проблем, а вот сканер не хочет даже засвечиваться (мандрива 2011). Линуксоидные проги на официальном сайте для сканера нет. Может можно как-то по другому решить эту проблему?
Благодарю заранее всех кто откликнется.

2 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

Покажите вывод команд при подключенном устройстве:

dmesg
lsusb
ls -l /dev/video*
id

P.S. Последняя команда должна быть дана от обычного пользователя.

Был, был и весь вышел...

3 Ответ от Gnom

  • Gnom
  • Gnom
  • Пользователь
  • Неактивен
  • Зарегистрирован: 02.03.2010
  • Сообщений: 4,928
  • Репутация : [ 65 | 2 ]

Andrey271064, драйвера качал с оф.сайта? Если да, то там есть еще фирмварник для мфу, возможно его нужно то же установить.

Mageia4, KDE  4.11.4.

4 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

да,есть такой   подскажите как?

5 Ответ от Gnom

  • Gnom
  • Gnom
  • Пользователь
  • Неактивен
  • Зарегистрирован: 02.03.2010
  • Сообщений: 4,928
  • Репутация : [ 65 | 2 ]

Andrey271064, покажи сначала вывод команд, те что просил Lupo Alberto.

Mageia4, KDE  4.11.4.

6 Ответ от Andrey271064 (13.02.2012 09:37:13 отредактировано Andrey271064)

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

попробую

dmesg

+ открыть спойлер
andrey@localhost ~]$ dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.7-desktop-1mnb2 (thomas@n3.mandriva.com) (gcc version 4.6.0 20110513 (prerelease) (GCC) ) #1 SMP Sun May 22 21:09:18 UTC 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003dce0000 (usable)
 BIOS-e820: 000000003dce0000 - 000000003dce3000 (ACPI NVS)
 BIOS-e820: 000000003dce3000 - 000000003dcf0000 (ACPI data)
 BIOS-e820: 000000003dcf0000 - 000000003dd00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. EG41MFT-US2H/EG41MFT-US2H, BIOS F7 11/04/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3dce0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 03E000000 mask FFE000000 uncachable
  2 base 03DE00000 mask FFFE00000 uncachable
  3 base 03DD00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00f5360] f5360
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000373fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037000000 page 2M
 0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ bfa000-c00000
RAMDISK: 362d1000 - 37ff0000
Allocated new RAMDISK: 345b2000 - 362d0a0c
Move RAMDISK from 00000000362d1000 - 0000000037fefa0b to 345b2000 - 362d0a0b
ACPI: RSDP 000f6d70 00014 (v00 GBT   )
ACPI: RSDT 3dce3040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 3dce30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 3dce3180 03E8A (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 3dce0000 00040
ACPI: HPET 3dce7180 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 3dce7200 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG 3dce7240 06442 (v01 GBT    GBT   B0 5455312E BG?? 00020101)
ACPI: APIC 3dce7080 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
104MB HIGHMEM available.
883MB LOWMEM available.
  mapped low ram: 0 - 373fe000
  low ram: 0 - 373fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000373fe
  HighMem  0x000373fe -> 0x0003dce0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003dce0
On node 0 totalpages: 253039
free_area_init_node: node 0, pgdat c0698f00, node_mem_map f6c3d200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1736 pages used for memmap
  Normal zone: 220470 pages, LIFO batch:31
  HighMem zone: 210 pages used for memmap
  HighMem zone: 26640 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 3 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 3dd00000 (gap: 3dd00000:a2300000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f6800000 s27840 r0 d21312 u1048576
pcpu-alloc: s27840 r0 d21312 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 251061
Kernel command line: BOOT_IMAGE=linux root=UUID=3049c443-0fee-4e4e-83df-01fd37f88811 logo.nologo quiet resume=UUID=64f43c11-c6e2-4a8a-8529-11be0f9edb88 splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 5062720 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0003dce0)
Memory: 961432k/1012608k available (3539k kernel code, 50724k reserved, 2231k data, 552k init, 107400k highmem)
virtual kernel memory layout:
    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
      .init : 0xc06a3000 - 0xc072d000   ( 552 kB)
      .data : 0xc0474fcc - 0xc06a2dc0   (2231 kB)
      .text : 0xc0100000 - 0xc0474fcc   (3539 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
CPU 0 irqstacks, hard=f4020000 soft=f4022000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2833.528 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5667.05 BogoMIPS (lpj=2833528)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
SMP alternatives: switching to UP code
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110112
ftrace: allocating 15835 entries in 31 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 01
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
Brought up 1 CPUs
Total of 1 processors activated (5667.05 BogoMIPS).
devtmpfs: initialized
Time:  8:26:11  Date: 02/13/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TAMG] - 0x07, should be 0x06 (20110112/tbutils-314)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x3dd00000-0xfebfffff]
pci 0000:00:00.0: [8086:2e30] type 0 class 0x000600
pci 0000:00:02.0: [8086:2e32] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xfd800000-0xfdbfffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xff00-0xff07]
pci 0000:00:02.1: [8086:2e33] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0xfdc00000-0xfdcfffff 64bit]
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0xfe00-0xfe1f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0xfd00-0xfd1f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0xfc00-0xfc1f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0xfb00-0xfb1f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io  0xf800-0xf80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io  0xce00-0xceff]
pci 0000:02:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xfddf8000-0xfddfbfff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.1:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:03:01.0: [10ec:8029] type 0 class 0x000200
pci 0000:03:01.0: reg 10: [io  0xdf00-0xdf1f]
pci 0000:03:07.0: [104c:8024] type 0 class 0x000c00
pci 0000:03:07.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
pci 0000:03:07.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
pci 0000:03:07.0: supports D1 D2
pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:07.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x3dd00000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 000000003dce0000 - 000000003fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x3dd00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x005f]
pnp 00:01: [io  0x0062-0x0063]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0074-0x007f]
pnp 00:01: [io  0x0091-0x0093]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0290-0x029f]
pnp 00:01: [io  0x0800-0x087f]
pnp 00:01: [io  0x0290-0x0294]
pnp 00:01: [io  0x0880-0x088f]
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0080-0x0090]
pnp 00:02: [io  0x0094-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [io  0x0400-0x047f]
system 00:09: [io  0x0400-0x047f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000cc800-0x000cffff]
pnp 00:0b: [mem 0x000f0000-0x000f7fff]
pnp 00:0b: [mem 0x000f8000-0x000fbfff]
pnp 00:0b: [mem 0x000fc000-0x000fffff]
pnp 00:0b: [mem 0x3dce0000-0x3dceffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0x3dcdffff]
pnp 00:0b: [mem 0x3dcf0000-0x3dcfffff]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfed13000-0xfed1dfff]
pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
pnp 00:0b: [mem 0xfff00000-0xffffffff]
pnp 00:0b: [mem 0x000e0000-0x000effff]
system 00:0b: [mem 0x000cc800-0x000cffff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0x3dce0000-0x3dceffff] could not be reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0x3dcdffff] could not be reserved
system 00:0b: [mem 0x3dcf0000-0x3dcfffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfed13000-0xfed1dfff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0c: [mem 0xffb80000-0xffbfffff]
pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
pci 0000:00:1c.0: BAR 14: assigned [mem 0x3dd00000-0x3defffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x3df00000-0x3e0fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0x3e100000-0x3e4fffff]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x3dd00000-0x3defffff]
pci 0000:00:1c.0:   bridge window [mem 0x3df00000-0x3e0fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0x3e100000-0x3e4fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x3dd00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x3dd00000-0x3defffff]
pci_bus 0000:01: resource 2 [mem 0x3df00000-0x3e0fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0x3e100000-0x3e4fffff]
pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0x3dd00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 4 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29820k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1329121571.248:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1726
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xf7c80000, using 1875k, total 32704k
vesafb: mode is 800x600x16, linelength=1600, pages=33
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isapnp: Scanning for PnP cards...
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel G41 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Checking hibernation image partition UUID=64f43c11-c6e2-4a8a-8529-11be0f9edb88
isapnp: No Plug & Play device found
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 0:173:422
rtc_cmos 00:04: setting system clock to 2012-02-13 08:26:12 UTC (1329121572)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 552k freed
<30>dracut: dracut-010-6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-cd driver 5.00
<30>udevd[110]: starting version 168
Refined TSC clocksource calibration: 2833.698 MHz.
Switching to clocksource tsc
<30>dracut: Starting plymouth daemon
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8290000, 1c:6f:65:ba:2b:0a, XID 0c200000 IRQ 42
firewire_ohci 0000:03:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
firewire_ohci: Added fw-ohci device 0000:03:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
firewire_core: created device fw0: GUID 00233c34006cf049, S400
ata2.01: HPA detected: current 390719855, native 390721968
ata2.01: ATA-7: ST3200826AS, 3.03, max UDMA/133
ata2.01: 390719855 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: configured for UDMA/133
ata1.00: ATA-4: WDC AC26400R, 15.01J15, max UDMA/66
ata1.00: 12594960 sectors, multi 16: LBA 
ata1.01: ATAPI: ASUS    DRW-1608P, 1.57, max UDMA/66
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/66
scsi 0:0:0:0: Direct-Access     ATA      WDC AC26400R     15.0 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM            ASUS     DRW-1608P        1.57 PQ: 0 ANSI: 5
scsi 1:0:1:0: Direct-Access     ATA      ST3200826AS      3.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sd 1:0:1:0: [sdb] 390719855 512-byte logical blocks: (200 GB/186 GiB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 12594960 512-byte logical blocks: (6.44 GB/6.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 >
sd 1:0:1:0: [sdb] Attached SCSI disk
usb 5-8: new high speed USB device using ehci_hcd and address 5
usb 5-8: New USB device found, idVendor=046d, idProduct=0829
usb 5-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-8: Product: Webcam C110
usb 5-8: Manufacturer:  
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: New USB device found, idVendor=046d, idProduct=c05b
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-1: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input1
generic-usb 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: New USB device found, idVendor=04cc, idProduct=1122
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 2 ports detected
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=0924, idProduct=420f
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: Xerox WorkCentre PE220 Series
usb 4-1: Manufacturer: Xerox
usb 4-1: SerialNumber: 44F628626.......
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:25 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb8): mounted filesystem with ordered data mode
<30>dracut: Checking filesystems
<30>dracut: fsck -T -t noopts=_netdev -A -a
<30>dracut: /dev/sdb8: clean, 219290/479552 files, 1726416/1916452 blocks
<30>dracut: Remounting /dev/disk/by-uuid/3049c443-0fee-4e4e-83df-01fd37f88811 with -o ro,
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb8): mounted filesystem with ordered data mode
<30>dracut: Mounted root filesystem /dev/sdb8
<30>dracut: Switching root
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
<30>systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; mandriva)
NET: Registered protocol family 10
<30>systemd[1]: Set hostname to <localhost.localdomain>.
<28>systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
<27>systemd[1]: [/etc/rc.d/init.d/iptables:18] Failed to add LSB Provides name firewall.service, ignoring: File exists
EXT3-fs (sdb8): using internal journal
<30>udevd[401]: starting version 168
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:73
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:76
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:77
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:78
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:79
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:80
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:81
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:82
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:83
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:84
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:85
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:86
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:87
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:88
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:89
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:90
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:91
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:92
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:93
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:94
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:95
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:96
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:97
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:98
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:99
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:100
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:101
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:105
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:106
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:107
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:108
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:109
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:110
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:111
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:112
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:113
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:114
<27>udevd[401]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:115
<27>udevd[401]: NAME="%k" is ignored, because it breaks kernel supplied names, please remove it from /etc/udev/rules.d/51-hso-udev.rules:124
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
leds_ss4200: no LED devices found
intel_rng: FWH not detected
<14>mtp-probe[737]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1"
<14>mtp-probe[732]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1"
iTCO_vendor_support: vendor-support=0
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
ne2k-pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
<14>mtp-probe[732]: bus: 3, device: 2 was not an MTP device
<14>mtp-probe[737]: bus: 4, device: 2 was not an MTP device
eth1: RealTek RTL-8029 found at 0xdf00, IRQ 19, 00:c0:df:f7:0c:ca.
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
<27>systemd-tmpfiles[862]: [/usr/lib/tmpfiles.d/legacy.conf:22] Unknown group 'lock'.
<29>systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1
<29>systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
<14>mtp-probe[863]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1"
<14>mtp-probe[869]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1"
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<14>mtp-probe[863]: bus: 3, device: 2 was not an MTP device
<14>mtp-probe[869]: bus: 4, device: 2 was not an MTP device
Linux video capture interface: v2.00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sd 1:0:1:0: Attached scsi generic sg2 type 0
uvcvideo: Found UVC 1.00 device Webcam C110 (046d:0829)
input: Webcam C110 as /devices/pci0000:00/0000:00:1d.7/usb5/5-8/5-8:1.0/input/input4
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
usbcore: registered new interface driver snd-usb-audio
<15>udev-configure-printer[1156]: main()
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
Adding 529164k swap on /dev/sdb9.  Priority:0 extents:1 across:529164k 
<30>acpid[1397]: starting up with proc fs
<30>acpid[1397]: 2 rules loaded
<30>acpid[1397]: waiting for events: event logging is off
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<29>systemd[1]: vboxadd-timesync.service: control process exited, code=exited status=1
<29>systemd[1]: Unit vboxadd-timesync.service entered failed state.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
r8169 0000:02:00.0: eth0: link up
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link up
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
checking generic (d0000000 1ff0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 256x96
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
eth1: no IPv6 routers present
eth0: no IPv6 routers present
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/66
ata1: EH complete
ata2.01: configured for UDMA/133
ata2: EH complete
<30>mount[1707]: Завершено
fuse init (API version 7.16)
[andrey@localhost ~]$

lsusb

[root@localhost ~]# lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c05b Logitech, Inc. 
Bus 003 Device 003: ID 04cc:1122 ST-Ericsson Hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0924:420f Xerox WorkCentre PE220 Series
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 005: ID 046d:0829 Logitech, Inc. 
[root@localhost ~]#

ls -l /dev/video*

[root@localhost ~]# ls -l /dev/video*
crw-rw----+ 1 root video 81, 0 Фев 13 08:26 /dev/video0
[root@localhost ~]#

id

[root@localhost ~]# id
uid=0(root) gid=0(root) группы=0(root)
[root@localhost ~]#

Пользуйтесь тегами.
verg

7 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

все-таки подскажите как установить фирмварник, может заработает :o  :o

8 Ответ от Gnom

  • Gnom
  • Gnom
  • Пользователь
  • Неактивен
  • Зарегистрирован: 02.03.2010
  • Сообщений: 4,928
  • Репутация : [ 65 | 2 ]

Фирмварник наверно не нужен, почитай для чего он.
Как пытался настроить сканер? Через Настройку компьютера - Оборудование - Настройка сканера?
Или попробуй через консоль, от root

 Консоль:
scannerdrake

Ищи там производителя и модель.
При настройки необходимые пакеты для сканирования установятся.

Mageia4, KDE  4.11.4.

9 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

Я всяко пробовал, не получается все равно. Я так думаю,что раз его просто нет в перечне оборудования и нет в репах,поэтому он выдает мне следующее при устаноке :

[root@localhost ~]# scannerdrake
insmod: can't read '/lib/modules/2.6.38.7-desktop-1mnb2/kernel/drivers/mfpportctrl/mfpport.ko': No such file or directory
insmod: can't read '/lib/modules/2.6.38.7-desktop-1mnb2/kernel/drivers/mfpportctrl/mfpport.ko': No such file or directory

Note: This output shows SysV services only and does not include native
      systemd services. SysV configuration data might be overriden by native
      systemd configuration.

Restarting xinetd (via systemctl):                              [  OK  ]

после чего выводится панель, с предложением выбрать сканер...

И у меня по умолчанию при запуске программы xSane выводит сканером webcamеру которая стоит на компе

10 Ответ от Gnom

  • Gnom
  • Gnom
  • Пользователь
  • Неактивен
  • Зарегистрирован: 02.03.2010
  • Сообщений: 4,928
  • Репутация : [ 65 | 2 ]

Есть ли в архиве текстовый файл readme или install? Возможно надо еще что то установить.

Mageia4, KDE  4.11.4.

11 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

readme или install таких файлов нет, есть install.sh через который я устанавливал МФУшку и все.

12 Ответ от Andrey271064 (16.02.2012 12:52:27 отредактировано Andrey271064)

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

может быть кто подскажет где можно еще порыть в инете в поиске возможности установки и запуска этого сканера...припоминается мне,что когда я ставил Мандриву 2007(это года четыре назад), каким то образхом у меня работал сканер...но вотчто я делал, уже не помню...но тоже пляски с бубном были не слабые :cool:

при установке драйверов  с диска через панель drivers.sh выводится следующее

+ открыть спойлер

[root@localhost pe220]# ./drivers.sh
MFPLDSteps=3
MFPLDStep=Installing common files...
#########################################################################################
1.0.164
1.0.164
Installing mfpcommon...
Copyright Xerox (c)
Software license silently accepted via command-line option.
Backing up old versions of non-shared files to be installed...
Backing up old versions of shared files to be installed...
Creating installation directories...
Installing software...
Running post-install commands...
MFPLDProgress=100
MFPLDStep=Running scripts...
cp: не удалось выполнить stat для «/usr/bin/lpr.cups»: Нет такого файла или каталога
WARNING: Unsupported kernel. Scanner connected to parallel port may not work
ERROR: Module mfpportprobe does not exist in /proc/modules
ERROR: Module mfpport does not exist in /proc/modules
Updating module dependencies. Please wait...
Initializing CUPS drivers (Please wait. This can take several minutes)...
done.
Installation is complete.
MFPLDProgress=100
MFPLDStep=Installing MFP drivers...
#########################################################################################
Installing MFP drivers package...
Copyright Xerox (c)
Software license silently accepted via command-line option.
Removing old versions of pe220 software...
Copyright Xerox (c)
Removing/restoring installed files...
Checking configuration files...
Running post-remove commands...
Removing drivers...
/etc/software/pe220.remove: строка 121: cd: /usr/lib64/sane: Нет такого файла или каталога
DEBUG pe220.postun.sh: point 6
DEBUG: PRINTER_NAME=pe220
DEBUG: DRIVERS_REG_FILE=/usr/local/bin/xerox/drivers/installed_software
DEBUG pe220.postun.sh: point 7
DEBUG pe220.postun.sh: point 9
Removal is complete.
Backing up old versions of shared files to be installed...
Installing software...
Running post-install commands...
Adding printer...
DEBUG: pe220.post.sh: DEVICE_LINE=
DEBUG: pe220.post.sh: DEVICE_PORT=
DEBUG: Printer install string=lpadmin -p pe220 -m xerox/pe220.ppd.gz -v mfp:/dev/mfp0
DEBUG: Setting SCALING option to printer=pe220
Initializing CUPS drivers...
DEBUG: CUPS_SCRIPT=/etc/rc.d/init.d/cups
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/usr/share/applnk - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/usr/share/applnk-mdk - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/etc/X11/applnk - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/opt/kde/share/applnk - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/opt/kde/share/applnk-mdk - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/opt/kde2/share/applnk - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/opt/kde2/share/applnk-mdk - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/opt/kde3/share/applnk - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/opt/kde3/share/applnk-mdk - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/etc/opt/kde/share/applnk/SuSE - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/etc/opt/kde2/share/applnk/SuSE - menu to be installed
DEBUG: pe220.post.sh: MENU dir: MFP_APPLNKS_DIR=/etc/opt/kde3/share/applnk/SuSE - menu to be installed
Installation is complete.
MFP driver package installation succedded.
MFPLDProgress=100
[root@localhost pe220]#

13 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

Ну если ни у кого нет никаких соображений, то думаю,что тему надо закрыть,чтоб не висела в форуме.

14 Ответ от jashaw5

  • jashaw5
  • jashaw5
  • Пользователь
  • Неактивен
  • Откуда: Мариуполь
  • Зарегистрирован: 19.12.2010
  • Сообщений: 819
  • Репутация : [ 17 | 1 ]

Даю несколько ссылок понастройке сканнера Epson. Походят для любого, только ID и прошивку подставлять для устанавливаемого.
http://www.bible-mda.ru/soft/scanning/s … linux.html
http://forum.ubuntu.ru/index.php?topic=27983.0
http://tehm.info/linux_mandriva2007_scaner_epson1270
http://ru.gentoo-wiki.com/wiki/Epson_1270

Segui il tuo corso, e lascia dir le genti

15 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

Вот нашел в установочной папке  диска Linux/models/pe220/pe220.install  

#!/bin/sh
# Installation script for Xerox WorkCentre PE220 Series Driver version 1.0.
# Produced using ESP Package Manager v3.3.0; report problems to epm@easysw.com.
#%product Xerox WorkCentre PE220 Series Driver
#%vendor Xerox (c)
#%copyright Xerox (c)
#%version 1.0 1000001
#%description Xerox WorkCentre PE220 Series CUPS printer configuration file.
#%rootsize 0
#%usrsize 358
#
PATH=/usr/xpg4/bin:/bin:/usr/bin:/usr/ucb:${PATH}
SHELL=/bin/sh
if test "`id -u`" != "0"; then
    echo Sorry, you must be root to install this software.
    exit 1
fi
echo 'Copyright Xerox (c)'
# Reset umask for install...
umask 002
# Determine correct echo options...
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
    ac_n=-n
    ac_c=
else
    ac_n=
    ac_c='\c'
fi
# Determine correct extract options for the tar command...
if test `uname` = Darwin; then
    ac_tar="tar -xpPf"
else if test "`tar --help 2>&1 | grep GNU`" = ""; then
    ac_tar="tar -xpf"
else
    ac_tar="tar -xpPf"
fi fi
if test "$*" = "now"; then
    echo Software license silently accepted via command-line option.
else
    echo ""
    echo This installation script will install the 'Xerox WorkCentre PE220 Series Driver'
    echo software version '1.0' on your system.
    echo ""
    while true ; do
        echo $ac_n "Do you wish to continue? $ac_c"
        read yesno
        case "$yesno" in
            y | yes | Y | Yes | YES)
            break
            ;;
            n | no | N | No | NO)
            exit 1
            ;;
            *)
            echo Please enter yes or no.
            ;;
        esac
    done
    more pe220.license
    echo ""
    while true ; do
        echo $ac_n "Do you agree with the terms of this license? $ac_c"
        read yesno
        case "$yesno" in
            y | yes | Y | Yes | YES)
            break
            ;;
            n | no | N | No | NO)
            exit 1
            ;;
            *)
            echo Please enter yes or no.
            ;;
        esac
    done
fi
if test -x /etc/software/pe220.remove; then
    echo Removing old versions of pe220 software...
    /etc/software/pe220.remove now
fi
case `uname` in
    AIX)
    dfroot=`df -k / | tr '\n' ' '`
    dfusr=`df -k /usr | tr '\n' ' '`
    fsroot=`echo $dfroot | awk '{print $15}'`
    sproot=`echo $dfroot | awk '{print $11}'`
    fsusr=`echo $dfusr | awk '{print $15}'`
    spusr=`echo $dfusr | awk '{print $11}'`
    ;;

    HP-UX)
    dfroot=`df -k / | tr '\n' ' '`
    dfusr=`df -k /usr | tr '\n' ' '`
    fsroot=`echo $dfroot | awk '{print $1}'`
    sproot=`echo $dfroot | awk '{print $9}'`
    fsusr=`echo $dfusr | awk '{print $1}'`
    spusr=`echo $dfusr | awk '{print $9}'`
    ;;

    IRIX*)
    dfroot=`df -k / | tr '\n' ' '`
    dfusr=`df -k /usr | tr '\n' ' '`
    fsroot=`echo $dfroot | awk '{print $15}'`
    sproot=`echo $dfroot | awk '{print $13}'`
    fsusr=`echo $dfusr | awk '{print $15}'`
    spusr=`echo $dfusr | awk '{print $13}'`
    ;;

    SCO*)
    dfroot=`df -k -B / | tr '\n' ' '`
    dfusr=`df -k -B /usr | tr '\n' ' '`
    fsroot=`echo $dfroot | awk '{print $13}'`
    sproot=`echo $dfroot | awk '{print $11}'`
    fsusr=`echo $dfusr | awk '{print $13}'`
    spusr=`echo $dfusr | awk '{print $11}'`
    ;;

    *)
    dfroot=`df -k / | tr '\n' ' '`
    dfusr=`df -k /usr | tr '\n' ' '`
    fsroot=`echo $dfroot | awk '{print $13}'`
    sproot=`echo $dfroot | awk '{print $11}'`
    fsusr=`echo $dfusr | awk '{print $13}'`
    spusr=`echo $dfusr | awk '{print $11}'`
    ;;
esac

temp=`ls -ln pe220.sw | awk '{print $5}'`
spsw=`expr $temp / 1024`

temp=`ls -ln pe220.ss | awk '{print $5}'`
spss=`expr $temp / 1024`

spall=`expr $spsw + $spss`

if test x$sproot = x -o x$spusr = x; then
    echo WARNING: Unable to determine available disk space; installing blindly...
else
    if test x$fsroot = x$fsusr; then
        if test $spall -gt $sproot; then
            echo Not enough free disk space for software:
            echo You need $spall kbytes but only have $sproot kbytes available.
            exit 1
        fi
    else
        if test $spsw -gt $sproot; then
            echo Not enough free disk space for software:
            echo You need $spsw kbytes in / but only have $sproot kbytes available.
            exit 1
        fi

        if test $spss -gt $spusr; then
            echo Not enough free disk space for software:
            echo You need $spss kbytes in /usr but only have $spusr kbytes available.
            exit 1
        fi
    fi
fi
if test -w /usr ; then
    echo Backing up old versions of shared files to be installed...
    for file in /usr/lib/sane/libsane-xerox_pe220.so /usr/lib/sane/libsane-xerox_pe220.so.1 /usr/lib/sane/libsane-xerox_pe220.so.1.0.1 \
/usr/local/bin/xerox/pe220.version /usr/local/lib/sane/libsane-xerox_pe220.so /usr/local/lib/sane/libsane-xerox_pe220.so.1 \
/usr/local/lib/sane/libsane-xerox_pe220.so.1.0.1 /usr/share/cups/model/xerox/pe220.ppd; do
        if test -d $file -o -f $file -o -h $file; then
            mv -f $file $file.O
        fi
    done
fi
echo Installing software...
$ac_tar pe220.sw
if echo Write Test >/usr/.writetest 2>/dev/null; then
rm -f /usr/.writetest
    $ac_tar pe220.ss
fi
if test -d /etc/software; then
    rm -f /etc/software/pe220.remove
else
    mkdir -p /etc/software
fi
cp pe220.remove /etc/software
chmod 544 /etc/software/pe220.remove
echo Running post-install commands...
#! /bin/sh
#
#    pe220 postinstall script
#

##################################################################################################
#    Defines

PRINTER_NAME=pe220

if [ "$XEROXMFP_INSTALL_DIR" == "" ] ; then
    XEROXMFP_INSTALL_DIR=/usr/local/bin/xerox
fi
DRIVERS_REG_DIR=$XEROXMFP_INSTALL_DIR/drivers
DRIVERS_REG_FILE=$DRIVERS_REG_DIR/installed_software
DRIVER_REG_DIR=$DRIVERS_REG_DIR/$PRINTER_NAME

FIRMWARE_DEVICE_NAME="WorkCentre PE220 Series"

source ../../set_variables.sh ../../OEM.ini

VENDOR="Xerox"
ISSUE=`cat /etc/issue 2>/dev/null`
LINUX_DIST=
if   ( echo $ISSUE | grep -q "Red Hat Linux release 8" ); then
    LINUX_DIST="REDHAT_8"
elif ( echo $ISSUE | grep -q "Red Hat Linux release 9" ); then
    LINUX_DIST="REDHAT_9"
elif ( echo $ISSUE | grep -q "Fedora" ); then
    LINUX_DIST="FEDORA"
fi

#    Defines
##################################################################################################

# Register scanner
CUR_PWD=$PWD
SANE_CONFIG_LOCATIONS="/etc/sane.d /usr/local/etc/sane.d"
for SANE_CONFIG_LOCATION in $SANE_CONFIG_LOCATIONS ; do
    if [ -w ${SANE_CONFIG_LOCATION}/dll.conf ] ; then
        if ! test -e ${SANE_CONFIG_LOCATION}/xerox_$PRINTER_NAME.dll.conf; then
            cd "${SANE_CONFIG_LOCATION}"
            echo "" >> dll.conf
            echo "xerox_$PRINTER_NAME" | cat dll.conf - | tr -s ["\n"] > xerox_$PRINTER_NAME.dll.conf
            cp -b -f xerox_$PRINTER_NAME.dll.conf dll.conf
            chmod 664 dll.conf
        fi
    fi
done
cd "$CUR_PWD"

# Install 64-bit sane backend begin {

if [ "$PLSFX" == "64" ]; then
    mkdir -p /usr/lib64/sane
    cp -a /usr/local/bin/${VENDOR_LC}/x86_64/libsane-${VENDOR_LC}_${PRINTER_NAME}.so.1.0.1 /usr/lib64/sane/
    ( cd /usr/lib64/sane && \
    ln -s libsane-${VENDOR_LC}_${PRINTER_NAME}.so.1.0.1 libsane-${VENDOR_LC}_${PRINTER_NAME}.so.1 ; \
    ln -s libsane-${VENDOR_LC}_${PRINTER_NAME}.so.1.0.1 libsane-${VENDOR_LC}_${PRINTER_NAME}.so )
fi

# Install 64-bit sane backend end   }

##################################################################################################
##    Printer ppd file

gzip -f /usr/share/cups/model/xerox/$PRINTER_NAME.ppd > /dev/null 2>/dev/null

##    Printer ppd file
##################################################################################################

##################################################################################################
##    Install printer

#if [ -x /etc/rc.d/init.d/cups ] ; then
#    CUPS_SCRIPT=/etc/rc.d/init.d/cups
#else
#    CUPS_SCRIPT=/etc/init.d/cups
#fi
#echo DEBUG: CUPS_SCRIPT=$CUPS_SCRIPT
#CUPS_RUNNING=0
#if [ "$CUPS_SCRIPT" != "" ] && ( $CUPS_SCRIPT status 2>/dev/null | grep running >/dev/null 2>/dev/null ) ; then
#    CUPS_RUNNING=1
#fi
#echo DEBUG: CUPS_RUNNING=$CUPS_RUNNING
#
#if ( service cups status 2>/dev/null | grep running >/dev/null 2>/dev/null ) ; then
#    CUPS_RUNNING=1
#fi
#if ! [ $CUPS_RUNNING -eq 1 ] ; then
#    if [ -e /etc/init.d/cups ]; then
#        if  ; then
#            CUPS_RUNNING=1
#        fi
#    fi
#fi
#if ! [ $CUPS_RUNNING -eq 1 ] ; then
#    if ! ( ps -e | grep cupsd >/dev/null 2>/dev/null ) ; then
#        `cupsd 2>/dev/null`
#    fi
#    if ( ps -e | grep cupsd >/dev/null 2>/dev/null ) ; then
#        CUPS_RUNNING=1
#    fi
#fi

if [ "`ps ax | awk '{print $1,$5}' | grep cupsd | awk '{print $1}'`" == "" ] ; then
    cupsd >/dev/null 2>/dev/null
    ./isCupsOn 631 60 >/dev/null 2>/dev/null
fi
CUPS_RUNNING=1
if [ $CUPS_RUNNING -eq 1 ] ; then
    echo    Adding printer...
    #    Add printer
    read -t 1
    #    Get device port
    DEVICE_PORT=
    DEVICE_LINE=`/usr/lib${PLSFX}/cups/backend/mfp 2>/dev/null | grep "$FIRMWARE_DEVICE_NAME" | head -n 1`
    echo DEBUG: pe220.post.sh: DEVICE_LINE=$DEVICE_LINE
    if [ "$DEVICE_LINE" != "" ] ; then
        DEVICE_PORT=`echo $DEVICE_LINE | awk '{print $2}' -`
    fi
    echo DEBUG: pe220.post.sh: DEVICE_PORT=$DEVICE_PORT
    if [ "$DEVICE_PORT" != "" ] ; then
        echo DEBUG: Printer install string=lpadmin -p $PRINTER_NAME -m xerox/$PRINTER_NAME.ppd.gz -v $DEVICE_PORT
        lpadmin -p $PRINTER_NAME -m xerox/$PRINTER_NAME.ppd.gz -v $DEVICE_PORT
    else
        echo DEBUG: Printer install string=lpadmin -p $PRINTER_NAME -m xerox/$PRINTER_NAME.ppd.gz -v mfp:/dev/mfp0
        lpadmin -p $PRINTER_NAME -m xerox/$PRINTER_NAME.ppd.gz -v mfp:/dev/mfp0
    fi
    
#    if ( /usr/lib${PLSFX}/cups/backend/mfp 2>/dev/null | grep "Xerox MFP USB Port" >/dev/null ) ; then
#        DEVICE_PORT=`/usr/lib${PLSFX}/cups/backend/mfp 2>/dev/null | grep "Xerox MFP USB Port" | awk '{print $2}' -`
#        if [ "$DEVICE_PORT" != "" ] ; then
#            lpadmin -p $PRINTER_NAME -m xerox/$PRINTER_NAME.ppd.gz -v $DEVICE_PORT
#        else
#            lpadmin -p $PRINTER_NAME -m xerox/$PRINTER_NAME.ppd.gz -v mfp:/dev/mfp4
#        fi
#    else
#        DEVICE_PORT=`/usr/lib${PLSFX}/cups/backend/mfp 2>/dev/null | grep "Xerox MFP Parallel Port" | awk '{print $2}' -`
#        if [ "$DEVICE_PORT" != "" ] ; then
#            lpadmin -p $PRINTER_NAME -m xerox/$PRINTER_NAME.ppd.gz -v $DEVICE_PORT
#        else
#            lpadmin -p $PRINTER_NAME -m xerox/$PRINTER_NAME.ppd.gz -v mfp:/dev/mfp0
#        fi
#    fi

    #    Enable printer
    read -t 1
    lpadmin -p $PRINTER_NAME -E
    #    Make printer default
    read -t 1
    lpadmin -d $PRINTER_NAME
    #    Set options if printer has not been installed
    if [ "__MFP_OVERWRITE_DRIVER__" != "1" ] ; then    # Preserve existing driver options
        echo DEBUG: Setting SCALING option to printer=$PRINTER_NAME
        lpoptions -p $PRINTER_NAME -o scaling=100 -o page-left=13 -o page-top=13 -o page-right=13 -o page-bottom=13
    fi
fi

##    Install printer
##################################################################################################

##################################################################################################
##    Restart (or start) CUPS

echo "Initializing CUPS drivers..."
if [ -x /etc/rc.d/init.d/cups ] ; then
    CUPS_SCRIPT=/etc/rc.d/init.d/cups
else
    CUPS_SCRIPT=/etc/init.d/cups
fi
echo DEBUG: CUPS_SCRIPT=$CUPS_SCRIPT
if [ -x $CUPS_SCRIPT ]; then
    $CUPS_SCRIPT restart >/dev/null 2>/dev/null
else
    cups_pid=`ps ax | awk '{print $1,$5}' | grep cupsd | awk '{print $1}'`
    echo DEBUG: cups_pid=$cups_pid
    if [ $cups_pid != "" ] ; then
        kill $cups_pid
    fi
    cupsd >/dev/null 2>/dev/null
fi
if ./isCupsOn 631 60 >/dev/null 2>/dev/null ; then
    echo "done."
fi

##    Restart (or start) CUPS
##################################################################################################

##################################################################################################
##    System menu

# Create Xerox menu items

if [ "$LINUX_DIST" == "REDHAT_8" -o "$LINUX_DIST" == "REDHAT_9" ] ; then
    APPLNK_FILE="/usr/share/applications/Uninstall_$PRINTER_NAME.desktop"
    if [ -f "$APPLNK_FILE" ] ; then
        rm -f "$APPLNK_FILE"
    fi
    echo "[Desktop Entry]"                                                        > "$APPLNK_FILE"
    echo "Name=Uninstall WorkCentre PE220 Series"                                                >> "$APPLNK_FILE"
    echo "Name[C]=Uninstall WorkCentre PE220 Series"                                            >> "$APPLNK_FILE"
    echo "Comment=WorkCentre PE220 Series driver uninstallation script"                        >> "$APPLNK_FILE"
    echo "Comment[C]=WorkCentre PE220 Series driver uninstallation script"                    >> "$APPLNK_FILE"
    echo "Type=Application"                                                        >> "$APPLNK_FILE"
#    echo "Exec=sh /usr/local/bin/xerox/drivers/$PRINTER_NAME.uninstall.sh"    >> "$APPLNK_FILE"
    echo "Exec=/usr/local/bin/xerox/uninstall -p /usr/local/bin/xerox/drivers -e ./$PRINTER_NAME.uninstall.sh"    >> "$APPLNK_FILE"
    echo "Path=/usr/local/bin/xerox/drivers/"                                    >> "$APPLNK_FILE"
    echo "Icon=/usr/share/icons/Uninstall.png"                                    >> "$APPLNK_FILE"
    echo "Terminal=0"                                                            >> "$APPLNK_FILE"
    echo "TerminalOptions="                                                        >> "$APPLNK_FILE"
    echo "X-KDE-SubstituteUID=false"                                            >> "$APPLNK_FILE"
    echo "X-KDE-Username="                                                        >> "$APPLNK_FILE"
    echo 'Categories=Application;SystemSetup;X-Xerox-Config;'                    >> "$APPLNK_FILE"
else
MENU_LOCATION1=/usr/share/applnk
MENU_LOCATION2=/usr/share/applnk-mdk
if test -d /var/lib/gnome/Mandrake ; then
    MENU_LOCATION2="$MENU_LOCATION2 /var/lib/gnome/Mandrake"
fi
MENU_LOCATION3=
MENU_LOCATION4=
if [ "$KDEDIR" != "" ] ; then
    MENU_LOCATION3=$KDEDIR/share/applnk
    MENU_LOCATION4=$KDEDIR/share/applnk-mdk
fi
if [ -d /usr/share/gnome/apps ] && [ "`ls /usr/share/gnome/apps 2>/dev/null`" != "" ] ; then
    MENU_LOCATION5=/usr/share/gnome/apps
else
    MENU_LOCATION5=/etc/X11/applnk
fi
# Remove duplicated menu entries at KDE menu in Fedora
if echo "$LINUX_DIST" | grep -q "FEDORA" ; then
    if [ "$MENU_LOCATION5" != "" ] ; then
        if [ -d "$MENU_LOCATION5" ] ; then
            if [ "$MENU_LOCATION1" ] ; then
                MENU_LOCATION1=
            fi
            if [ "$MENU_LOCATION3" ] ; then
                MENU_LOCATION3=
            fi
        fi
    fi
fi
MENU_LOCATION6=
if [ "$KDEDIRS" != "" ] ; then
    for kdeDir in `echo $KDEDIRS | tr ' ' '|' | tr ':' ' ' | tr '|' ' '` ;
    do
        MENU_LOCATION6="$MENU_LOCATION6 $kdeDir/share/applnk"
        MENU_LOCATION6="$MENU_LOCATION6 $kdeDir/share/applnk-mdk"
    done
fi
for kdeDir in kde kde2 kde3 ;
do
    MENU_LOCATION6="$MENU_LOCATION6 /opt/$kdeDir/share/applnk"
    MENU_LOCATION6="$MENU_LOCATION6 /opt/$kdeDir/share/applnk-mdk"
done
for kdeDir in kde kde2 kde3 ;
do
    MENU_LOCATION7="$MENU_LOCATION7 /etc/opt/$kdeDir/share/applnk/SuSE"
done
for MFP_APPLNKS_DIR in $MENU_LOCATION1 $MENU_LOCATION2 $MENU_LOCATION3 $MENU_LOCATION4 $MENU_LOCATION5 $MENU_LOCATION6 $MENU_LOCATION7
do
#    if [ "$MFP_APPLNKS_DIR" != "" ] ; then
    echo DEBUG: $PRINTER_NAME.post.sh: MENU dir: MFP_APPLNKS_DIR=$MFP_APPLNKS_DIR - menu to be installed
    if [ -d "$MFP_APPLNKS_DIR" ] && mkdir -p "$MFP_APPLNKS_DIR/Xerox_MFP" ; then
    echo DEBUG: $PRINTER_NAME.post.sh: MENU dir: MFP_APPLNKS_DIR=$MFP_APPLNKS_DIR - MENU IS INSTALLED
    
#    if ! [ -d "$MFP_APPLNKS_DIR" ] ; then
#        mkdir -p "$MFP_APPLNKS_DIR"
#    fi

    APPLNK_FILE="$MFP_APPLNKS_DIR"/Xerox_MFP/Uninstall_$PRINTER_NAME.desktop
    if [ -f "$APPLNK_FILE" ] ; then
        rm -f "$APPLNK_FILE"
    fi
    echo "[Desktop Entry]"                                                        > "$APPLNK_FILE"
    echo "Name=Uninstall WorkCentre PE220 Series"                                                >> "$APPLNK_FILE"
    echo "Name[C]=Uninstall WorkCentre PE220 Series"                                            >> "$APPLNK_FILE"
    echo "Comment=WorkCentre PE220 Series driver uninstallation script"                        >> "$APPLNK_FILE"
    echo "Comment[C]=WorkCentre PE220 Series driver uninstallation script"                    >> "$APPLNK_FILE"
    echo "Type=Application"                                                        >> "$APPLNK_FILE"
#    echo "Exec=sh /usr/local/bin/xerox/drivers/$PRINTER_NAME.uninstall.sh"    >> "$APPLNK_FILE"
    echo "Exec=/usr/local/bin/xerox/uninstall -p /usr/local/bin/xerox/drivers -e ./$PRINTER_NAME.uninstall.sh"    >> "$APPLNK_FILE"
    echo "Path=/usr/local/bin/xerox/drivers/"                                    >> "$APPLNK_FILE"
    echo "Icon=/usr/share/icons/Uninstall.png"                                    >> "$APPLNK_FILE"
    echo "Terminal=0"                                                            >> "$APPLNK_FILE"
    echo "TerminalOptions="                                                        >> "$APPLNK_FILE"
    echo "X-KDE-SubstituteUID=false"                                            >> "$APPLNK_FILE"
    echo "X-KDE-Username="                                                        >> "$APPLNK_FILE"
    
    fi
done

fi

##    System menu
##################################################################################################

# Register $PRINTER_NAME
mkdir -p $DRIVERS_REG_DIR
if ! grep $PRINTER_NAME $DRIVERS_REG_FILE >/dev/null 2>/dev/null; then
    echo    "$PRINTER_NAME"    >>    $DRIVERS_REG_FILE
fi
#mkdir -p $DRIVER_REG_DIR
#echo    "1.0.1"            >    $DRIVER_REG_DIR/version
#echo    "version: 1.0"    >>    $DRIVER_REG_DIR/version
#echo    "release: 1"    >>    $DRIVER_REG_DIR/version
cp -f -p --target-directory=$DRIVERS_REG_DIR $PRINTER_NAME.remove
# Prepare uninstall scripts
echo "#! /bin/sh"                            >    $DRIVERS_REG_DIR/$PRINTER_NAME.uninstall.sh
echo "cd \"$DRIVERS_REG_DIR\""                    >>    $DRIVERS_REG_DIR/$PRINTER_NAME.uninstall.sh
echo "sh $PRINTER_NAME.remove now"            >>    $DRIVERS_REG_DIR/$PRINTER_NAME.uninstall.sh
echo "sh mfpcommon.remove now"                >>    $DRIVERS_REG_DIR/$PRINTER_NAME.uninstall.sh
echo "rm -f $PRINTER_NAME.remove"            >>    $DRIVERS_REG_DIR/$PRINTER_NAME.uninstall.sh
echo "read -t 1"                            >>    $DRIVERS_REG_DIR/$PRINTER_NAME.uninstall.sh
echo "rm -f $PRINTER_NAME.uninstall.sh &"    >>    $DRIVERS_REG_DIR/$PRINTER_NAME.uninstall.sh
chmod 755 $DRIVERS_REG_DIR/$PRINTER_NAME.uninstall.sh

echo Installation is complete.

посмотрите,кто-то может еще что подскажет... Так-же в этой папке имеются файлы: drivers.sh  pe220.remove, если надо,то выложу

16 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

Что-то мне кажется,что я понял почему не работает сканер в МФУ. При загрузке mfpinstall из программы установки МФУшки(взял с установочного диска), процесс доходит до 95% и виснет наглухо...Может кто подскажет где взять программку для установки  МФУ, исключая оф.сайт, я оттуда скачал, такая же ичтория...Гуглил,но не нашел ac  Может кто -то имеет более глубокие познания,буду очень признателен :rolleyes:

17 Ответ от Gnom

  • Gnom
  • Gnom
  • Пользователь
  • Неактивен
  • Зарегистрирован: 02.03.2010
  • Сообщений: 4,928
  • Репутация : [ 65 | 2 ]
Andrey271064 пишет:

процесс доходит до 95% и виснет наглухо..

Ошибки какие-то выдаёт?

Mageia4, KDE  4.11.4.

18 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

Вообще ничего! Полный ступор. Запускал через консоль,  ./mfpinstall  , то же самое. Думал может время надо подольше, два часа ждал - глухо

19 Ответ от -=Serj=-

  • -=Serj=-
  • -=Serj=-
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 18.03.2011
  • Сообщений: 3,277
  • Репутация : [ 143 | 0 ]

Andrey271064, пробовали от рута

 Консоль:
# scanimage > file.tiff

?

Да, у меня Ubuntu.
Нет, не глючит.

20 Ответ от verg

  • verg
  • verg
  • Пользователь
  • Неактивен
  • Зарегистрирован: 06.09.2010
  • Сообщений: 10,132
  • Репутация : [ 432 | 1 ]

Andrey271064,
И покажите как ставите этот ./mfpinstall через консоль (копируйте всё)

21 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]
-=Serj=- пишет:

Andrey271064, пробовали от рута

 Консоль:
# scanimage > file.tiff

?

вот что получается

[root@localhost andrey]# scanimage > file.tiff
insmod: can't read '/lib/modules/2.6.39.4-5.1-desktop/kernel/drivers/mfpportctrl/mfpport.ko': No such file or directory
insmod: can't read '/lib/modules/2.6.39.4-5.1-desktop/kernel/drivers/mfpportctrl/mfpport.ko': No such file or directory
scanimage: sane_start: Invalid argument
[root@localhost andrey]#

22 Ответ от -=Serj=-

  • -=Serj=-
  • -=Serj=-
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 18.03.2011
  • Сообщений: 3,277
  • Репутация : [ 143 | 0 ]

http://www.support.xerox.com/support/wo … anguage=en

Description
Installs Print and Scan drivers - PPD files for Linux operating systems using CUPS printing services.

Да, у меня Ubuntu.
Нет, не глючит.

23 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

я оттуда уже качал, толку нет

24 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]
verg пишет:

Andrey271064,
И покажите как ставите этот ./mfpinstall через консоль (копируйте всё)

а как загрузить снимок экрана?

25 Ответ от verg

  • verg
  • verg
  • Пользователь
  • Неактивен
  • Зарегистрирован: 06.09.2010
  • Сообщений: 10,132
  • Репутация : [ 432 | 1 ]

Просто скопируйте содержимое консоли, как обычный текст.

з.ы. про картинки http://linuxforum.ru/viewtopic.php?id=19234

26 Ответ от -=Serj=- (01.03.2012 14:00:51 отредактировано -=Serj=-)

  • -=Serj=-
  • -=Serj=-
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 18.03.2011
  • Сообщений: 3,277
  • Репутация : [ 143 | 0 ]

Попробуйте поискать в другом месте:

 Консоль:
find /lib/ -name mfpport.ko

И покажите, заодно

 Консоль:
# scanimage -L

Да, у меня Ubuntu.
Нет, не глючит.

27 Ответ от Andrey271064 (01.03.2012 14:36:32 отредактировано Andrey271064)

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

[/quote=verg]Просто скопируйте содержимое консоли, как обычный текст.

дак там вообще,только команда на инсталяцию, а на экране графика на иполнение 95%...и процесс приходится убивать через диспетчера процессов

28 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]
-=Serj=- пишет:

Попробуйте поискать в другом месте:

 Консоль:
find /lib/ -name mfpport.ko

И покажите, заодно

 Консоль:
# scanimage -L

Вот пожалуйста

[root@localhost andrey]# find /lib/ -name mfpport.ko
[root@localhost andrey]# scanimage -L
insmod: can't read '/lib/modules/2.6.39.4-5.1-desktop/kernel/drivers/mfpportctrl/mfpport.ko': No such file or directory
insmod: can't read '/lib/modules/2.6.39.4-5.1-desktop/kernel/drivers/mfpportctrl/mfpport.ko': No such file or directory
device `v4l:/dev/video0' is a Noname Webcam C110 virtual device
[root@localhost andrey]#

29 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

[/quote=verg]Просто скопируйте содержимое консоли, как обычный текст.

http://storage5.static.itmages.ru/i/12/ … b174c4.png

30 Ответ от Andrey271064

  • Зарегистрирован: 09.02.2012
  • Сообщений: 69
  • Репутация : [ 0 | 0 ]

Короче! Тему можно закрывать ac
Для этого сканера нет бэкенда, и на  sane-сайтах,нет прошивки для этой модели. А эта модель с производства уже снята,так,что вряд ли кто-то будет пытаться заморачиваться  по этому поводу. А фимварник на оф.сайте кривой,по крайней мере установить его под Линукс не представляется возможным.

МЕНЯТЬ СКАНЕР НАДО. Да еще чтоб поддерживался Линуксоидом! ag 
Спасибо всем,кто пинимал участие в решении вопроса!