Настоятельно просим вас при общении соблюдать Правила форума и законы РФ. Наша тематика вне политики, поэтому воздержитесь от обсуждения ситуации на Украине и связанных с ней событий, независимо от того, какую сторону вы поддерживаете.
Также напоминаем, что наш форум находится в доменной зоне .ru, физически расположен на российских серверах и мы соблюдаем действующее законодательство России. Любые сообщения о политике будут удаляться.
Linux Forum → openSUSE и SUSE Linux Enterprise → [Решено] Open Suse 12.2 Live KDE модем ZTE 8700
Страницы 1
Чтобы отправить ответ, вы должны войти или зарегистрироваться
Во общем я не очень разбираюсь таки в линуксах и только недавно начал их познавать. Так что прошу помощи.
Ставил много разных дистрибутивов (Бубунты Убубнты... и т.д. ) Но желаю осесть на 1дном каком то. Пока остановился на КДЕ С сусой...
Но возникла небольшая проблема..... При запуски в лайве - мой модем ZTE 8700 прекрасно воспринимается и работае. НО после установки на хард. Никакие бубоны не могут его заставить работать + обнаружение сетей с меню пропадает -_-.
sudo udevadm control --log-priority=info
sudo tail -f /var/log/massage
затем подкл.уст-во
Вывод выложите на какой нибудь сервис, например, сюда http://paste.opensuse.org/
http://paste.opensuse.org/
А что это?
http://paste.opensuse.org/view/raw/d06cbf3e типа так?
dima@linux-tauj:~> sudo udevadm control --log-priority=info
root's password:
dima@linux-tauj:~> sudo tail -f /var/log/massage
tail: cannot open ‘/var/log/massage’ for reading: Нет такого файла или каталога
dima@linux-tauj:~>
Самое интересное в YaST в информации о оборудывании видит его. -_- и порт усб то же видит. Все проги же для подключения онного же не видит вообще.
Сразу хочу оговорится что я Нубоват в этом деле. Потому благодарю всех кто откликнутся за ранее.
Опечатался, еще раз:
sudo udevadm control --log-priority=info
sudo udevadm control --reload-rules
sudo tail -f /var/log/messages
Вышло вот такое....
dima@linux-tauj:~> sudo udevadm control --log-priority=info
root's password:
dima@linux-tauj:~> sudo udevadm control --reload-rules
dima@linux-tauj:~> sudo tail -f /var/log/messages
Nov 4 21:31:20 linux-tauj udevd[2509]: unload module index
Nov 4 21:31:20 linux-tauj udevd[2793]: unload module index
Nov 4 21:31:20 linux-tauj udevd[282]: worker [2509] exit
Nov 4 21:31:20 linux-tauj udevd[282]: worker [2509] cleaned up
Nov 4 21:31:20 linux-tauj udevd[282]: worker [2793] exit
Nov 4 21:31:20 linux-tauj udevd[282]: worker [2793] cleaned up
Nov 4 21:31:32 linux-tauj sudo: dima : TTY=pts/2 ; PWD=/home/dima ; USER=root ; COMMAND=/usr/bin/udevadm control --reload-rules
Nov 4 21:31:32 linux-tauj udevd[282]: validate module index
Nov 4 21:31:32 linux-tauj udevd[282]: udevd message (RELOAD) received
Nov 4 21:31:40 linux-tauj sudo: dima : TTY=pts/2 ; PWD=/home/dima ; USER=root ; COMMAND=/usr/bin/tail -f /var/log/messages
Nov 4 21:31:53 linux-tauj kernel: [ 283.382811] usb 6-1: new full-speed USB device number 8 using ohci_hcd
Nov 4 21:31:53 linux-tauj kernel: [ 283.510701] usb 6-1: device descriptor read/64, error -62
Nov 4 21:31:53 linux-tauj kernel: [ 283.739481] usb 6-1: device descriptor read/64, error -62
Nov 4 21:31:54 linux-tauj kernel: [ 283.963277] usb 6-1: new full-speed USB device number 9 using ohci_hcd
Nov 4 21:31:54 linux-tauj kernel: [ 284.091166] usb 6-1: device descriptor read/64, error -62
Nov 4 21:31:54 linux-tauj kernel: [ 284.319951] usb 6-1: device descriptor read/64, error -62
Nov 4 21:31:54 linux-tauj kernel: [ 284.543742] usb 6-1: new full-speed USB device number 10 using ohci_hcd
Nov 4 21:31:55 linux-tauj kernel: [ 284.947397] usb 6-1: device not accepting address 10, error -62
Nov 4 21:31:55 linux-tauj kernel: [ 285.070261] usb 6-1: new full-speed USB device number 11 using ohci_hcd
Nov 4 21:31:55 linux-tauj kernel: [ 285.473895] usb 6-1: device not accepting address 11, error -62
Nov 4 21:31:55 linux-tauj kernel: [ 285.473915] hub 6-0:1.0: unable to enumerate USB device on port 1
Nov 4 21:31:59 linux-tauj kernel: [ 289.078567] usb 6-1: new full-speed USB device number 12 using ohci_hcd
Nov 4 21:31:59 linux-tauj udevd[282]: validate module index
Nov 4 21:31:59 linux-tauj kernel: [ 289.227464] usb 6-1: New USB device found, idVendor=19d2, idProduct=fffe
Nov 4 21:31:59 linux-tauj kernel: [ 289.227472] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 4 21:31:59 linux-tauj kernel: [ 289.227477] usb 6-1: Product: ZTE CDMA Tech
Nov 4 21:31:59 linux-tauj kernel: [ 289.227482] usb 6-1: Manufacturer: ZTE, Incorporated
Nov 4 21:31:59 linux-tauj udevd[282]: unload module index
Nov 4 21:31:59 linux-tauj udevd[282]: unable to open '/run/udev/rules.d': No such file or directory
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/10-dm.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/11-dm-lvm.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/13-dm-disk.rules' as rules file
Nov 4 21:31:59 linux-tauj kernel: [ 289.231549] option 6-1:1.0: GSM modem (1-port) converter detected
Nov 4 21:31:59 linux-tauj kernel: [ 289.231690] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB0
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/40-libgphoto2.rules' as rules file
Nov 4 21:31:59 linux-tauj kernel: [ 289.233550] option 6-1:1.1: GSM modem (1-port) converter detected
Nov 4 21:31:59 linux-tauj kernel: [ 289.233665] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB1
Nov 4 21:31:59 linux-tauj kernel: [ 289.235524] option 6-1:1.2: GSM modem (1-port) converter detected
Nov 4 21:31:59 linux-tauj kernel: [ 289.235632] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB2
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/40-lomoco.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/41-soundfont.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/42-usb-hid-pm.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/50-udev-default.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/51-lirc.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/52-irda.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/52-usx2yaudio.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/56-idedma.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/60-cdrom_id.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/60-floppy.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/60-fprint-autosuspend.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/60-pcmcia.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/60-persistent-alsa.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/60-persistent-input.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/60-persistent-serial.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/60-persistent-storage-tape.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/60-persistent-storage.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/60-persistent-v4l.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/60-vboxguest.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/61-accelerometer.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/64-md-raid.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/65-xorg-wacom.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/69-libmtp.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/69-xorg-vmmouse.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/70-kpartx.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/70-persistent-net.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/70-uaccess.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: IMPORT found builtin 'usb_id --export %p', replacing /lib/udev/rules.d/70-uaccess.rules:12
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/71-multipath.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: RUN+="socket:..." support will be removed from a future udev release. Please remove it from: /etc/udev/rules.d/71-multipath.rules:7 and use libudev to subscribe to events.
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/71-seat.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: IMPORT found builtin 'path_id %p', replacing /lib/udev/rules.d/71-seat.rules:22
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/73-seat-late.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/73-seat-numlock.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/75-cd-aliases-generator.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/75-net-description.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/75-persistent-net-generator.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/75-probe_mtd.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/75-tty-description.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-mm-ericsson-mbm.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-mm-longcheer-port-types.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-mm-nokia-port-types.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-mm-pcmcia-device-blacklist.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-mm-platform-serial-whitelist.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-mm-simtech-port-types.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-mm-x22x-port-types.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-mm-zte-port-types.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-network.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/77-nm-olpc-mesh.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/78-sound-card.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/80-drivers.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/80-mm-candidate.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/80-udisks.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: IMPORT found builtin 'pci-db %p', replacing /lib/udev/rules.d/80-udisks.rules:6
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/81-mount.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/81-mptctl.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/85-regulatory.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/90-alsa-restore.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/90-libgpod.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/90-pulseaudio.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-dm-notify.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-keyboard-force-release.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-keymap.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-udev-late.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-upower-battery-recall-dell.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-upower-battery-recall-gateway.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-upower-battery-recall-ibm.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-upower-csr.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/97-bluetooth-serial.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/97-bluetooth.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/etc/udev/rules.d/99-iwlwifi-led.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: reading '/lib/udev/rules.d/99-systemd.rules' as rules file
Nov 4 21:31:59 linux-tauj udevd[282]: rules use 186732 bytes tokens (15561 * 12 bytes), 33756 bytes buffer
Nov 4 21:31:59 linux-tauj udevd[282]: temporary index used 55060 bytes (2753 * 20 bytes)
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1816 queued, 'add' 'usb'
Nov 4 21:31:59 linux-tauj udevd[282]: load module index
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1816 forked new worker [2819]
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1817 queued, 'add' 'usb'
Nov 4 21:31:59 linux-tauj udevd[2819]: seq 1816 running
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1818 queued, 'add' 'usb-serial'
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1cfe8a0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1819 queued, 'add' 'tty'
Nov 4 21:31:59 linux-tauj udevd[2819]: no db file to read /run/udev/data/c189:651: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1820 queued, 'add' 'usb'
Nov 4 21:31:59 linux-tauj udevd[2819]: IMPORT builtin 'usb_id' /lib/udev/rules.d/40-libgphoto2.rules:11
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1821 queued, 'add' 'usb-serial'
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_VENDOR=ZTE__Incorporated
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1822 queued, 'add' 'tty'
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_VENDOR_ENC=ZTE\x2c\x20Incorporated
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1823 queued, 'add' 'usb'
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_VENDOR_ID=19d2
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1824 queued, 'add' 'usb-serial'
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_MODEL=ZTE_CDMA_Tech
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1825 queued, 'add' 'tty'
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_MODEL_ENC=ZTE\x20CDMA\x20Tech
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_MODEL_ID=fffe
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_REVISION=0000
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_SERIAL=ZTE__Incorporated_ZTE_CDMA_Tech
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_BUS=usb
Nov 4 21:31:59 linux-tauj udevd[2819]: ID_USB_INTERFACES=:ffffff:
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d01520 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d045c0 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d04d10 has devpath '/devices/pci0000:00'
Nov 4 21:31:59 linux-tauj udevd[2819]: MODE 0664 /lib/udev/rules.d/50-udev-default.rules:55
Nov 4 21:31:59 linux-tauj udevd[2819]: IMPORT builtin skip 'usb_id' /lib/udev/rules.d/50-udev-default.rules:56
Nov 4 21:31:59 linux-tauj udevd[2819]: PROGRAM 'mtp-probe /sys/devices/pci0000:00/0000:00:13.1/usb6/6-1 6 12' /lib/udev/rules.d/69-libmtp.rules:864
Nov 4 21:31:59 linux-tauj udevd[2820]: starting 'mtp-probe /sys/devices/pci0000:00/0000:00:13.1/usb6/6-1 6 12'
Nov 4 21:31:59 linux-tauj mtp-probe: checking bus 6, device 12: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1"
Nov 4 21:31:59 linux-tauj mtp-probe: bus: 6, device: 12 was not an MTP device
Nov 4 21:31:59 linux-tauj udevd[2819]: 'mtp-probe /sys/devices/pci0000:00/0000:00:13.1/usb6/6-1 6 12'(out) '0'
Nov 4 21:31:59 linux-tauj udevd[2819]: 'mtp-probe /sys/devices/pci0000:00/0000:00:13.1/usb6/6-1 6 12' [2820] exit with return code 0
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d01520 filled with db file data
Nov 4 21:31:59 linux-tauj udevd[2819]: handling device node '/dev/bus/usb/006/012', devnum=c189:651, mode=0664, uid=0, gid=0
Nov 4 21:31:59 linux-tauj udevd[2819]: set permissions /dev/bus/usb/006/012, 020664, uid=0, gid=0
Nov 4 21:31:59 linux-tauj udevd[2819]: creating symlink '/dev/char/189:651' to '../bus/usb/006/012'
Nov 4 21:31:59 linux-tauj udevd[2819]: created db file '/run/udev/data/c189:651' for '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:31:59 linux-tauj udevd[2819]: passed -1 bytes to netlink monitor 0x1d09810
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1816 done with 0
Nov 4 21:31:59 linux-tauj udevd[282]: passed 332 bytes to netlink monitor 0x1cfe370
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1820 forked new worker [2821]
Nov 4 21:31:59 linux-tauj udevd[2821]: seq 1820 running
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1823 forked new worker [2822]
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d09d80 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1'
Nov 4 21:31:59 linux-tauj udevd[2819]: seq 1816 processed with 0
Nov 4 21:31:59 linux-tauj udevd[2819]: seq 1817 running
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d09d80 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0'
Nov 4 21:31:59 linux-tauj udevd[2821]: no db file to read /run/udev/data/+usb:6-1:1.1: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[2822]: seq 1823 running
Nov 4 21:31:59 linux-tauj udevd[2819]: no db file to read /run/udev/data/+usb:6-1:1.0: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1cfe7d0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d040f0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2'
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d05150 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d04610 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:31:59 linux-tauj udevd[2822]: no db file to read /run/udev/data/+usb:6-1:1.2: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[2819]: RUN 'usb_modeswitch --driver-bind %p %s{idVendor} %s{idProduct} %E{PRODUCT}' /lib/udev/rules.d/40-usb_modeswitch.rules:16
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d00b10 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d008e0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d05ba0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d010f0 has devpath '/devices/pci0000:00'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d01050 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d049a0 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1cfe7d0 filled with db file data
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d017b0 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d06270 has devpath '/devices/pci0000:00'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d04740 has devpath '/devices/pci0000:00'
Nov 4 21:31:59 linux-tauj udevd[2821]: passed -1 bytes to netlink monitor 0x1d01b70
Nov 4 21:31:59 linux-tauj udevd[2819]: device 0x1d05150 filled with db file data
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d008e0 filled with db file data
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1820 done with 0
Nov 4 21:31:59 linux-tauj udevd[2821]: seq 1820 processed with 0
Nov 4 21:31:59 linux-tauj udevd[2823]: starting 'usb_modeswitch --driver-bind /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0 19d2/fffe/0'
Nov 4 21:31:59 linux-tauj udevd[282]: passed 188 bytes to netlink monitor 0x1cfe370
Nov 4 21:31:59 linux-tauj udevd[2821]: seq 1821 running
Nov 4 21:31:59 linux-tauj udevd[2822]: passed -1 bytes to netlink monitor 0x1d09d80
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d053f0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/ttyUSB1'
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1823 done with 0
Nov 4 21:31:59 linux-tauj udevd[2822]: seq 1823 processed with 0
Nov 4 21:31:59 linux-tauj udevd[2821]: no db file to read /run/udev/data/+usb-serial:ttyUSB1: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[282]: passed 188 bytes to netlink monitor 0x1cfe370
Nov 4 21:31:59 linux-tauj udevd[2822]: seq 1824 running
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d05610 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d0aa30 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2/ttyUSB2'
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d04fb0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:31:59 linux-tauj udevd[2822]: no db file to read /run/udev/data/+usb-serial:ttyUSB2: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1cfe5e0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d096e0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2'
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d040f0 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d04ba0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d04630 has devpath '/devices/pci0000:00'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d04320 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:31:59 linux-tauj udevd[2821]: no db file to read /run/udev/data/+usb:6-1:1.1: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1cfe2d0 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:31:59 linux-tauj udevd[2821]: passed -1 bytes to netlink monitor 0x1d01b70
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1cfe810 has devpath '/devices/pci0000:00'
Nov 4 21:31:59 linux-tauj udevd[2821]: seq 1821 processed with 0
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1821 done with 0
Nov 4 21:31:59 linux-tauj udevd[2822]: no db file to read /run/udev/data/+usb:6-1:1.2: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[282]: passed 232 bytes to netlink monitor 0x1cfe370
Nov 4 21:31:59 linux-tauj udevd[2821]: seq 1822 running
Nov 4 21:31:59 linux-tauj udevd[2822]: passed -1 bytes to netlink monitor 0x1d09d80
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d05610 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/ttyUSB1/tty/ttyUSB1'
Nov 4 21:31:59 linux-tauj udevd[2822]: seq 1824 processed with 0
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1824 done with 0
Nov 4 21:31:59 linux-tauj udevd[2821]: no db file to read /run/udev/data/c188:1: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[282]: passed 232 bytes to netlink monitor 0x1cfe370
Nov 4 21:31:59 linux-tauj udevd[2822]: seq 1825 running
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d09d80 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/ttyUSB1'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d096e0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2/ttyUSB2/tty/ttyUSB2'
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d05e40 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1'
Nov 4 21:31:59 linux-tauj udevd[2822]: no db file to read /run/udev/data/c188:2: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d053f0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d040f0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2/ttyUSB2'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1cfe4e0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d012a0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:31:59 linux-tauj udevd[2822]: PROGRAM 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2/ttyUSB2/tty/ttyUSB2 19d2 fffe ' /lib/udev/rules.d/40-usb_modeswitch.rules:9
Nov 4 21:31:59 linux-tauj udevd[2831]: starting 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2/ttyUSB2/tty/ttyUSB2 19d2 fffe '
Nov 4 21:31:59 linux-tauj udevd[2821]: PROGRAM 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/ttyUSB1/tty/ttyUSB1 19d2 fffe ' /lib/udev/rules.d/40-usb_modeswitch.rules:9
Nov 4 21:31:59 linux-tauj udevd[2822]: 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2/ttyUSB2/tty/ttyUSB2 19d2 fffe ' [2831] exit with return code 0
Nov 4 21:31:59 linux-tauj udevd[2822]: GROUP 16 /lib/udev/rules.d/50-udev-default.rules:11
Nov 4 21:31:59 linux-tauj udevd[2833]: starting 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/ttyUSB1/tty/ttyUSB1 19d2 fffe '
Nov 4 21:31:59 linux-tauj udevd[2822]: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-serial.rules:9
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d00e20 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d04620 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:31:59 linux-tauj udevd[2822]: device 0x1d04b60 has devpath '/devices/pci0000:00'
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_PATH=pci-0000:00:13.1-usb-0:1:1.2
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_PATH_TAG=pci-0000_00_13_1-usb-0_1_1_2
Nov 4 21:31:59 linux-tauj udevd[2822]: LINK 'serial/by-path/pci-0000:00:13.1-usb-0:1:1.2-port0' /lib/udev/rules.d/60-persistent-serial.rules:11
Nov 4 21:31:59 linux-tauj udevd[2822]: IMPORT builtin 'usb_id' /lib/udev/rules.d/60-persistent-serial.rules:13
Nov 4 21:31:59 linux-tauj udevd[2822]: /sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2: if_class 255 protocol 0
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_VENDOR=ZTE__Incorporated
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_VENDOR_ENC=ZTE\x2c\x20Incorporated
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_VENDOR_ID=19d2
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_MODEL=ZTE_CDMA_Tech
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_MODEL_ENC=ZTE\x20CDMA\x20Tech
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_MODEL_ID=fffe
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_REVISION=0000
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_SERIAL=ZTE__Incorporated_ZTE_CDMA_Tech
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_TYPE=generic
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_BUS=usb
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_USB_INTERFACES=:ffffff:
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_USB_INTERFACE_NUM=02
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_USB_DRIVER=option
Nov 4 21:31:59 linux-tauj udevd[2822]: LINK 'serial/by-id/usb-ZTE__Incorporated_ZTE_CDMA_Tech-if02-port0' /lib/udev/rules.d/60-persistent-serial.rules:18
Nov 4 21:31:59 linux-tauj udevd[2821]: 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/ttyUSB1/tty/ttyUSB1 19d2 fffe ' [2833] exit with return code 0
Nov 4 21:31:59 linux-tauj udevd[2822]: no db file to read /run/udev/data/+usb-serial:ttyUSB2: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[2821]: GROUP 16 /lib/udev/rules.d/50-udev-default.rules:11
Nov 4 21:31:59 linux-tauj udevd[2822]: IMPORT builtin 'usb-db' /lib/udev/rules.d/75-tty-description.rules:7
Nov 4 21:31:59 linux-tauj udevd[2821]: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-serial.rules:9
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d06110 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d06660 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:31:59 linux-tauj udevd[2821]: device 0x1d0aba0 has devpath '/devices/pci0000:00'
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_PATH=pci-0000:00:13.1-usb-0:1:1.1
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_PATH_TAG=pci-0000_00_13_1-usb-0_1_1_1
Nov 4 21:31:59 linux-tauj udevd[2821]: LINK 'serial/by-path/pci-0000:00:13.1-usb-0:1:1.1-port0' /lib/udev/rules.d/60-persistent-serial.rules:11
Nov 4 21:31:59 linux-tauj udevd[2821]: IMPORT builtin 'usb_id' /lib/udev/rules.d/60-persistent-serial.rules:13
Nov 4 21:31:59 linux-tauj udevd[2821]: /sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1: if_class 255 protocol 0
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_VENDOR=ZTE__Incorporated
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_VENDOR_ENC=ZTE\x2c\x20Incorporated
Nov 4 21:31:59 linux-tauj udevd[2822]: ID_VENDOR_FROM_DATABASE=ONDA Communication S.p.A.
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_VENDOR_ID=19d2
Nov 4 21:31:59 linux-tauj udevd[2822]: handling device node '/dev/ttyUSB2', devnum=c188:2, mode=0660, uid=0, gid=16
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_MODEL=ZTE_CDMA_Tech
Nov 4 21:31:59 linux-tauj udevd[2822]: set permissions /dev/ttyUSB2, 020660, uid=0, gid=16
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_MODEL_ENC=ZTE\x20CDMA\x20Tech
Nov 4 21:31:59 linux-tauj udevd[2822]: creating symlink '/dev/char/188:2' to '../ttyUSB2'
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_MODEL_ID=fffe
Nov 4 21:31:59 linux-tauj udevd[2822]: creating link '/dev/serial/by-id/usb-ZTE__Incorporated_ZTE_CDMA_Tech-if02-port0' to '/dev/ttyUSB2'
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_REVISION=0000
Nov 4 21:31:59 linux-tauj udevd[2822]: creating symlink '/dev/serial/by-id/usb-ZTE__Incorporated_ZTE_CDMA_Tech-if02-port0' to '../../ttyUSB2'
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_SERIAL=ZTE__Incorporated_ZTE_CDMA_Tech
Nov 4 21:31:59 linux-tauj udevd[2822]: creating link '/dev/serial/by-path/pci-0000:00:13.1-usb-0:1:1.2-port0' to '/dev/ttyUSB2'
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_TYPE=generic
Nov 4 21:31:59 linux-tauj udevd[2822]: creating symlink '/dev/serial/by-path/pci-0000:00:13.1-usb-0:1:1.2-port0' to '../../ttyUSB2'
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_BUS=usb
Nov 4 21:31:59 linux-tauj udevd[2822]: created db file '/run/udev/data/c188:2' for '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2/ttyUSB2/tty/ttyUSB2'
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_USB_INTERFACES=:ffffff:
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_USB_INTERFACE_NUM=01
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_USB_DRIVER=option
Nov 4 21:31:59 linux-tauj udevd[2821]: LINK 'serial/by-id/usb-ZTE__Incorporated_ZTE_CDMA_Tech-if01-port0' /lib/udev/rules.d/60-persistent-serial.rules:18
Nov 4 21:31:59 linux-tauj udevd[2821]: no db file to read /run/udev/data/+usb-serial:ttyUSB1: No such file or directory
Nov 4 21:31:59 linux-tauj udevd[2821]: IMPORT builtin 'usb-db' /lib/udev/rules.d/75-tty-description.rules:7
Nov 4 21:31:59 linux-tauj udevd[2822]: passed -1 bytes to netlink monitor 0x1d09d80
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1825 done with 0
Nov 4 21:31:59 linux-tauj udevd[2822]: seq 1825 processed with 0
Nov 4 21:31:59 linux-tauj udevd[2821]: ID_VENDOR_FROM_DATABASE=ONDA Communication S.p.A.
Nov 4 21:31:59 linux-tauj udevd[2821]: handling device node '/dev/ttyUSB1', devnum=c188:1, mode=0660, uid=0, gid=16
Nov 4 21:31:59 linux-tauj udevd[2821]: set permissions /dev/ttyUSB1, 020660, uid=0, gid=16
Nov 4 21:31:59 linux-tauj udevd[2821]: creating symlink '/dev/char/188:1' to '../ttyUSB1'
Nov 4 21:31:59 linux-tauj udevd[2821]: creating link '/dev/serial/by-id/usb-ZTE__Incorporated_ZTE_CDMA_Tech-if01-port0' to '/dev/ttyUSB1'
Nov 4 21:31:59 linux-tauj udevd[2821]: creating symlink '/dev/serial/by-id/usb-ZTE__Incorporated_ZTE_CDMA_Tech-if01-port0' to '../../ttyUSB1'
Nov 4 21:31:59 linux-tauj udevd[2821]: creating link '/dev/serial/by-path/pci-0000:00:13.1-usb-0:1:1.1-port0' to '/dev/ttyUSB1'
Nov 4 21:31:59 linux-tauj udevd[2821]: creating symlink '/dev/serial/by-path/pci-0000:00:13.1-usb-0:1:1.1-port0' to '../../ttyUSB1'
Nov 4 21:31:59 linux-tauj udevd[2821]: created db file '/run/udev/data/c188:1' for '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/ttyUSB1/tty/ttyUSB1'
Nov 4 21:31:59 linux-tauj udevd[2821]: passed -1 bytes to netlink monitor 0x1d01b70
Nov 4 21:31:59 linux-tauj udevd[282]: seq 1822 done with 0
Nov 4 21:31:59 linux-tauj udevd[2821]: seq 1822 processed with 0
Nov 4 21:32:00 linux-tauj udevd[2819]: 'usb_modeswitch --driver-bind /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0 19d2/fffe/0' [2823] exit with return code 0
Nov 4 21:32:00 linux-tauj udevd[2819]: passed -1 bytes to netlink monitor 0x1d09810
Nov 4 21:32:00 linux-tauj udevd[2819]: seq 1817 processed with 0
Nov 4 21:32:00 linux-tauj udevd[282]: seq 1817 done with 0
Nov 4 21:32:00 linux-tauj udevd[282]: passed 188 bytes to netlink monitor 0x1cfe370
Nov 4 21:32:00 linux-tauj udevd[2819]: seq 1818 running
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d066d0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/ttyUSB0'
Nov 4 21:32:00 linux-tauj udevd[2819]: no db file to read /run/udev/data/+usb-serial:ttyUSB0: No such file or directory
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d05860 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0'
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1cfe5b0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d05b20 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d06030 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d040f0 has devpath '/devices/pci0000:00'
Nov 4 21:32:00 linux-tauj udevd[2819]: no db file to read /run/udev/data/+usb:6-1:1.0: No such file or directory
Nov 4 21:32:00 linux-tauj udevd[2819]: passed -1 bytes to netlink monitor 0x1d09810
Nov 4 21:32:00 linux-tauj udevd[2819]: seq 1818 processed with 0
Nov 4 21:32:00 linux-tauj udevd[282]: seq 1818 done with 0
Nov 4 21:32:00 linux-tauj udevd[282]: passed 232 bytes to netlink monitor 0x1cfe370
Nov 4 21:32:00 linux-tauj udevd[2819]: seq 1819 running
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d09d80 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/ttyUSB0/tty/ttyUSB0'
Nov 4 21:32:00 linux-tauj udevd[2819]: no db file to read /run/udev/data/c188:0: No such file or directory
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d05860 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/ttyUSB0'
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1cfe5b0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0'
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d04ce0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6/6-1'
Nov 4 21:32:00 linux-tauj udevd[2819]: PROGRAM 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/ttyUSB0/tty/ttyUSB0 19d2 fffe ' /lib/udev/rules.d/40-usb_modeswitch.rules:9
Nov 4 21:32:00 linux-tauj udevd[2835]: starting 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/ttyUSB0/tty/ttyUSB0 19d2 fffe '
Nov 4 21:32:00 linux-tauj udevd[2819]: 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/ttyUSB0/tty/ttyUSB0 19d2 fffe ' [2835] exit with return code 0
Nov 4 21:32:00 linux-tauj udevd[2819]: GROUP 16 /lib/udev/rules.d/50-udev-default.rules:11
Nov 4 21:32:00 linux-tauj udevd[2819]: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-serial.rules:9
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d019b0 has devpath '/devices/pci0000:00/0000:00:13.1/usb6'
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d06600 has devpath '/devices/pci0000:00/0000:00:13.1'
Nov 4 21:32:00 linux-tauj udevd[2819]: device 0x1d0ade0 has devpath '/devices/pci0000:00'
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_PATH=pci-0000:00:13.1-usb-0:1:1.0
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_PATH_TAG=pci-0000_00_13_1-usb-0_1_1_0
Nov 4 21:32:00 linux-tauj udevd[2819]: LINK 'serial/by-path/pci-0000:00:13.1-usb-0:1:1.0-port0' /lib/udev/rules.d/60-persistent-serial.rules:11
Nov 4 21:32:00 linux-tauj udevd[2819]: IMPORT builtin 'usb_id' /lib/udev/rules.d/60-persistent-serial.rules:13
Nov 4 21:32:00 linux-tauj udevd[2819]: /sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0: if_class 255 protocol 0
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_VENDOR=ZTE__Incorporated
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_VENDOR_ENC=ZTE\x2c\x20Incorporated
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_VENDOR_ID=19d2
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_MODEL=ZTE_CDMA_Tech
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_MODEL_ENC=ZTE\x20CDMA\x20Tech
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_MODEL_ID=fffe
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_REVISION=0000
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_SERIAL=ZTE__Incorporated_ZTE_CDMA_Tech
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_TYPE=generic
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_BUS=usb
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_USB_INTERFACES=:ffffff:
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_USB_INTERFACE_NUM=00
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_USB_DRIVER=option
Nov 4 21:32:00 linux-tauj udevd[2819]: LINK 'serial/by-id/usb-ZTE__Incorporated_ZTE_CDMA_Tech-if00-port0' /lib/udev/rules.d/60-persistent-serial.rules:18
Nov 4 21:32:00 linux-tauj udevd[2819]: no db file to read /run/udev/data/+usb-serial:ttyUSB0: No such file or directory
Nov 4 21:32:00 linux-tauj udevd[2819]: IMPORT builtin 'usb-db' /lib/udev/rules.d/75-tty-description.rules:7
Nov 4 21:32:00 linux-tauj udevd[2819]: ID_VENDOR_FROM_DATABASE=ONDA Communication S.p.A.
Nov 4 21:32:00 linux-tauj udevd[2819]: handling device node '/dev/ttyUSB0', devnum=c188:0, mode=0660, uid=0, gid=16
Nov 4 21:32:00 linux-tauj udevd[2819]: set permissions /dev/ttyUSB0, 020660, uid=0, gid=16
Nov 4 21:32:00 linux-tauj udevd[2819]: creating symlink '/dev/char/188:0' to '../ttyUSB0'
Nov 4 21:32:00 linux-tauj udevd[2819]: creating link '/dev/serial/by-id/usb-ZTE__Incorporated_ZTE_CDMA_Tech-if00-port0' to '/dev/ttyUSB0'
Nov 4 21:32:00 linux-tauj udevd[2819]: creating symlink '/dev/serial/by-id/usb-ZTE__Incorporated_ZTE_CDMA_Tech-if00-port0' to '../../ttyUSB0'
Nov 4 21:32:00 linux-tauj udevd[2819]: creating link '/dev/serial/by-path/pci-0000:00:13.1-usb-0:1:1.0-port0' to '/dev/ttyUSB0'
Nov 4 21:32:00 linux-tauj udevd[2819]: creating symlink '/dev/serial/by-path/pci-0000:00:13.1-usb-0:1:1.0-port0' to '../../ttyUSB0'
Nov 4 21:32:00 linux-tauj udevd[2819]: created db file '/run/udev/data/c188:0' for '/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/ttyUSB0/tty/ttyUSB0'
Nov 4 21:32:00 linux-tauj udevd[2819]: passed -1 bytes to netlink monitor 0x1d09810
Nov 4 21:32:00 linux-tauj udevd[282]: seq 1819 done with 0
Nov 4 21:32:00 linux-tauj udevd[2819]: seq 1819 processed with 0
Nov 4 21:32:03 linux-tauj udevd[282]: cleanup idle workers
Nov 4 21:32:03 linux-tauj udevd[282]: validate module index
Nov 4 21:32:03 linux-tauj udevd[2819]: unload module index
Nov 4 21:32:03 linux-tauj udevd[282]: worker [2819] exit
Nov 4 21:32:03 linux-tauj udevd[282]: worker [2819] cleaned up
Nov 4 21:32:32 linux-tauj su: (to root) dima on /dev/pts/3
Ну не знаю, чем Вам помочь. Вроде должно и так работать через последовательный порт без участия usb_modeswitch.
Выдержка:
# Adds the device ID to the "option" driver after a warm boot
# in cases when the device is yet unknown to the driver; checked
# against a list of known modems, or else no action
ATTR{bInterfaceClass}=="ff", ATTR{bInterfaceNumber}=="00", ATTRS{bNumConfigurations}=="*", RUN+="usb_modeswitch --driver-bind %p %s{idVendor} %s{idProduct} %E{PRODUCT}"
Cтоп! В livecd по умолчанию вроде сеть управляется через NM, а в установленной системе наоборот.
Покажите:
grep -i NetworkManager= /etc/sysconfig/network/config
Cтоп!
Да, ещё sudo по умолчанию не используется.
dima@linux-mvl7:~> grep -i NetworkManager= /etc/sysconfig/network/config
NETWORKMANAGER="no"
# This variable has no effect if NETWORKMANAGER=no.
Может для начала напишешь как настраивал модем.
Может для начала напишешь как настраивал модем.
На других системах? На Этой в лайве ? Или же в этой на харде?
На других системах?
Тебе надо на других системах или openSuse 
В сетевых настройках включай NetworkManager и настраивай через него, или пробуй настраивать через kppp.
dimasfanzerg пишет:На других системах?
Тебе надо на других системах или openSuse
В сетевых настройках включай NetworkManager и настраивай через него, или пробуй настраивать через kppp.
Извините за нубство. Но как запустить NetworkManager? Он не запускается, хотя кругом поставил автозапуск при запуске системы.
kppp модема не видет - так же как и через YaST если настраивать....
Самое обидное в лайве все видит - все работает... Установил на хард.... Ничего не видет ничего не работает.
То ли я фулл Нуб. То ли в системе что то не так.... До этого работал на 12,1 (с двд ставил) Все отлично было -_-
Какое устройство выбираешь в kppp или yast?
http://www.suseblog.org.ua/net/shamansk … i-3g-modem Про настройку kppp, если будут вопросы после прочтения, пиши. usb_modeswitch у тебя установлен.
Какое устройство выбираешь в kppp или yast?
В том то и дело - само оно не отображается (могу скрин сделать) Вписываю в ручную то что В yast - сведениях об оборудовании показывает(в посте N3 скрин) . Но эффекта ноль.
При этом в Live режиме все ок. И само отображается и подключается без проблем вообще.
Давай так, пиши как ты делал настройки модема, если можешь со скринами.
У меня сейчас установлена Mageia. openSUSE подзабыл. NetworkManager включается в yast сетевые устройства или сетевые настройки, там надо поставить галку на использовать NetworkManager, как то так.
Вот, нашёл http://www.linuxcookbook.ru/books/opens … 10s02.html
Я вот думаю не морочить мож голову и двд скачать ? Могут ли пропасть вот такие вот проблемы?
Я вот думаю не морочить мож голову и двд скачать ?
Лучше конечно DVD, но опять же могут возникнуть вопросы по настройке.
Давай так, пиши как ты делал настройки модема, если можешь со скринами.
У меня сейчас установлена Mageia. openSUSE подзабыл. NetworkManager включается в yast сетевые устройства или сетевые настройки, там надо поставить галку на использовать NetworkManager, как то так.Вот, нашёл http://www.linuxcookbook.ru/books/opens … 10s02.html
-_- после сей святой и простой операции - все работает четко. Во все утилитах появился модем.....
Yast - Настройки сети - Общие параметры - Традиционный метод с ifup сменил на Управляемый пользователем с NetworkManager
Спасибо ВСЕМ огромне за ПОМОЩЬ!
Страницы 1
Чтобы отправить ответ, вы должны войти или зарегистрироваться
Linux Forum → openSUSE и SUSE Linux Enterprise → [Решено] Open Suse 12.2 Live KDE модем ZTE 8700
Форум работает на PunBB, при поддержке Informer Technologies, Inc
