Не поднимается вторая сетевая карта. Делаю:
# service network restart
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Disabling IPv4 packet forwarding: net.ipv4.ip_forward = 0
[ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Bringing up interface eth1: Device eth1 does not seem to be present, delaying initialization.
[FAILED]родные дрова поставил результат тот же:
+ открыть спойлер
# make clean modules
make -C src/ clean
make[1]: Entering directory `/tmp/r8168-8.013.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers Module.markers *.order
make[1]: Leaving directory `/tmp/r8168-8.013.00/src'
make -C src/ modules
make[1]: Entering directory `/tmp/r8168-8.013.00/src'
make -C /lib/modules/2.6.18-164.11.1.el5/build SUBDIRS=/tmp/r8168-8.013.00/src modules
make[2]: Entering directory `/usr/src/kernels/2.6.18-164.11.1.el5-i686'
CC [M] /tmp/r8168-8.013.00/src/r8168_n.o
/tmp/r8168-8.013.00/src/r8168_n.c: In function ‘rtl8168_tx_clear’:
/tmp/r8168-8.013.00/src/r8168_n.c:5190: warning: unused variable ‘dev’
/tmp/r8168-8.013.00/src/r8168_n.c: At top level:
/tmp/r8168-8.013.00/src/r8168_n.c:526: warning: ‘rtl8168_ocp_gphy_read’ defined but not used
CC [M] /tmp/r8168-8.013.00/src/r8168_asf.o
CC [M] /tmp/r8168-8.013.00/src/rtl_eeprom.o
LD [M] /tmp/r8168-8.013.00/src/r8168.o
Building modules, stage 2.
MODPOST
CC /tmp/r8168-8.013.00/src/r8168.mod.o
LD [M] /tmp/r8168-8.013.00/src/r8168.ko
make[2]: Leaving directory `/usr/src/kernels/2.6.18-164.11.1.el5-i686'
strip --strip-debug r8168.ko
make[1]: Leaving directory `/tmp/r8168-8.013.00/src'
# make install
make -C src/ install
make[1]: Entering directory `/tmp/r8168-8.013.00/src'
install -m 744 -c r8168.ko /lib/modules/2.6.18-164.11.1.el5/kernel/drivers/net/
make[1]: Leaving directory `/tmp/r8168-8.013.00/src'
# depmod -a
# modprobe r8168
# lsmod | grep r8168
r8168 59672 0