Hi, some days ago I decided to upgrade my Ubuntu 10.04 to the newer Ubuntu 12.04. Everything went very well, and after some configuration I felt satisfied. Only a thing created some head scratching: my Canon printer LBP3010 could not print!
After some unsuccessfully attempts to make the driver functioning I decided to make some researches in Google. I tried all possible drivers, deb packages and following strictly all posts that I fount in the Internet, but... nothing, my printer seems to be dead!
My last chance was to recompile from source. First with unsuccessful results, due to many error that occurred during the compilation procedure. Again, after some head scratching and a few sleepless nights analyzing the source code, I get the right solution and now I have my LBP3010 fully functioning.

Note that the following procedure is valid for a 64 bit machine.

uname -a gives
Linux toni-laptop 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

In the following I will show the procedure that I followed in order to get the printer working.
First I downloaded the last driver package I found at the Canon web page:

Linux_CAPT_PrinterDriver_V240_uk_EN.tar.gz.

Now the procedure to compile.

First step
1) extract the tar.gz package to a folder of Your choice;
2) cd Linux_CAPT_PrinterDriver_V240_uk_EN/Src/
3) untar cndrvcups-capt-2.40-1.tar.gz and cndrvcups-common-2.40-1.tar.gz
4) cd cndrvcups-common-2.40/
5) gedit debian/control and change "i386" with "amd64" al line 9, save and close file
6) dpkg-buildpackage.

At the end of operation 6) You will find cndrvcups-common_2.40-1_amd64.deb package in Src directory.

7) install it (required for the next compilation steps) with the common
sudo dpkg -i cndrvcups-common_2.40-1_amd64.deb

Second step
1) cd cndrvcups-capt-2.40/
2) gedit debian/control and change "i386" with "amd64" al line 9, save and close file
3) gedit debian/rules and uncomment line 172 which will results, then, in
# dh_shlibdeps
Save and close
4) gedit statusui/src/ppapdata.c and add the header (this is to define variable ppd_size_t)
#include <cups/ppd.h>
save and close file.
5) gedit cngplp/configure.in and add "AC_CONFIG_MACRO_DIR([m4])" at line 9, save and close
6) gedit cngplp/Makefile.am and add "ACLOCAL_AMFLAGS=-I m4" at line 5, save and close
7) run the following commands in the cngplp directory:
libtoolize
aclocal
automake
cd ..
9) dpkg-buildpackage

At the end of operation 9) You will find cndrvcups-capt_2.40-1_amd64.deb package in Src directory.

10) install it with
sudo dpkg -i cndrvcups-capt_2.40-1_amd64.deb

End of procedure.
From this point You should follow the printer configuration steps as stated in the previous posts.

I hope this will help the Ubuntu Community.
Kind regards

Там же для зависов http://www.sakryukin.ru/index.php?modul … =8&a=4 попробуй.
А, вспомнил почему у меня проблемы были - на amd64 была ошибка - lpadmin: Bad device-uri scheme "ccp"
Помогли вот такие линки (правда не помню версию драйвера)

ln -s /usr/lib64/cups/backend/ccp /usr/lib/cups/backend/ccp
ln -s /usr/lib64/cups/filter/pstocapt /usr/lib/cups/filter/pstocapt
ln -s /usr/lib64/cups/filter/pstocapt2 /usr/lib/cups/filter/pstocapt2
ln -s /usr/lib64/cups/filter/pstocapt3 /usr/lib/cups/filter/pstocapt3

На 32-бит затруднений не было.

Демона забирай (ccpd)

#!/bin/sh
# startup script for Canon Printer Daemon for CUPS (ccpd)

if [ -f /etc/rc.d/init.d/functions ]; then
    if [ -f /etc/slackware-version ]; then
        SYS_F="SL"
    else
        . /etc/rc.d/init.d/functions 
        SYS_F="RH"
    fi
elif [ -x /sbin/startproc ]; then
    SYS_F="Su"
elif [ -x /sbin/start-stop-daemon ]; then
    SYS_F="De"
fi

DAEMON=/usr/sbin/ccpd
LOCKFILE=/var/lock/subsys/ccpd

export PATH=$PATH:/usr/local/sbin:/usr/local/bin

ccpd_start ()
{
    echo -n "Starting ${DAEMON}: "

    if [ "$SYS_F" = "RH" ]; then    
        daemon ${DAEMON}
        [ "$?" = "0" ] && touch ${LOCKFILE}
        echo "."
    elif [ "$SYS_F" = "Su" ]; then
        startproc ${DAEMON}
        echo "."
    elif [ "$SYS_F" = "De" ]; then
        start-stop-daemon --start --quiet --exec ${DAEMON}
        echo "."
    else
        `${DAEMON}`
    fi
}

ccpd_stop ()
{
    echo -n "Shutting down ${DAEMON}: "

    if [ "$SYS_F" = "De" ]; then
        start-stop-daemon --stop --quiet --signal 15 --exec ${DAEMON}
        echo "."
    elif [ "$SYS_F" = "SL" ]; then
        kill -KILL `pidof ${DAEMON}`
        [ "$?" = "0" ] && rm -f ${LOCKFILE}
        echo 
    else
        killproc ${DAEMON}
        [ "$?" = "0" ] && rm -f ${LOCKFILE}
        echo    
    fi
}


case $1 in

    start)
        ccpd_start
        ;;
        
    stop)
        ccpd_stop
        ;;
    
    status)
        echo "${DAEMON}:" `pidof ${DAEMON}`
        ;;
    
    restart)
        ccpd_stop
        ccpd_start
        ;;
    
    *)
        echo "Usage: ccpd {start|stop|status}"
        exit 1
        ;;
esac
exit 0

Скопируй его в /etc/init.d/ccpd и права на выполнение дай:

# chmod a+x /etc/init.d/ccpd