Уважаемые посетители!

danilec · 31.03.2013 21:08:12

danilec
Новичок
Неактивен

Зарегистрирован: 16.12.2012
Сообщений: 27
Репутация : [ 0 | 0 ]

Ноут на Опенсусе (12.3) не видит SD-карты, пробовал несколько разных, на винде всё работает.
Ноут hp pavilion g6-2240sr.
Что делать, куда копать?

yars · 31.03.2013 21:35:57

yars
Slacker
Неактивен

Откуда: Тамбовская область
Зарегистрирован: 23.03.2012
Сообщений: 10,043
Репутация : [ 309 | 1 ]

Полагаю, вывод dmesg опровергнет ваши обвинения в том, что OpenSUSE не видит вашу SD
Она ее видит, но почему-то не может смонтировать. Вставьте эту флешку и покажите же dmesg, естественно, от рута.

Истинный hotplug - это обычная электрическая розетка: воткнул - работает, и никаких драйверов.
Arch Linux/Xfce/Xiaomi Mi Notebook Pro 15.6 | Slackware64-current/Xfce/Lenovo G580

danilec · 01.04.2013 00:07:32

danilec
Новичок
Неактивен

Зарегистрирован: 16.12.2012
Сообщений: 27
Репутация : [ 0 | 0 ]

yars⇓ пишет:

Вставьте эту флешку и покажите же dmesg, естественно, от рута.

+ открыть спойлер

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.10-1.1-desktop (geeko@buildhost) (gcc version 4.7.2 20130108 [gcc-4_7-branch revision 195012] (SUSE Linux) ) #1 SMP PREEMPT Thu Feb 28 15:06:29 UTC 2013 (82d3f21)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.1-desktop root=UUID=917de788-9015-42c7-bf0f-1e6497287438 ro resume=/dev/disk/by-id/ata-Hitachi_HTS547575A9E384_J2140059F2HKYA-part8 splash=silent quiet showopts
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a6049fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a604a000-0x00000000a684afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a684b000-0x00000000af2befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af2bf000-0x00000000afabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afabf000-0x00000000afbbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afbbf000-0x00000000afbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afbff000-0x00000000afbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001aeffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0xafbfe000 ACPI 2.0=0xafbfe014 SMBIOS=0xafabef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000004000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000004000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB)
[ 0.000000] efi: mem06: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[ 0.000000] efi: mem07: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006e000) (0MB)
[ 0.000000] efi: mem08: type=10, attr=0xf, range=[0x000000000006e000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem09: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem10: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
[ 0.000000] efi: mem12: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001fde000) (15MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000001fde000-0x000000003e187000) (961MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x000000003e187000-0x0000000040000000) (30MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040000000-0x0000000078bbc000) (907MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000078bbc000-0x00000000a38c0000) (685MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000a38c0000-0x00000000a38e0000) (0MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000a38e0000-0x00000000a5e30000) (37MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000a5e30000-0x00000000a604a000) (2MB)
[ 0.000000] efi: mem21: type=0, attr=0xf, range=[0x00000000a604a000-0x00000000a684b000) (8MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000a684b000-0x00000000a68bc000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a68bc000-0x00000000a68be000) (0MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000a68be000-0x00000000a68bf000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000a68bf000-0x00000000a6aa1000) (1MB)
[ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x00000000a6aa1000-0x00000000a6abf000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000a6abf000-0x00000000ab942000) (78MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ab942000-0x00000000ac1e4000) (8MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000ac1e4000-0x00000000ac204000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000ac204000-0x00000000ac605000) (4MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000ac605000-0x00000000ac906000) (3MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000ac906000-0x00000000ac908000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000ac908000-0x00000000ac90c000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000ac90c000-0x00000000ac90f000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000ac90f000-0x00000000acba6000) (2MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000acba6000-0x00000000acbd9000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000acbd9000-0x00000000acbe6000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000acbe6000-0x00000000acc10000) (0MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000acc10000-0x00000000acc12000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000acc12000-0x00000000acd3f000) (1MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000acd3f000-0x00000000acd45000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000acd45000-0x00000000acd46000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000acd46000-0x00000000acd47000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000acd47000-0x00000000acd54000) (0MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000acd54000-0x00000000acd55000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000acd55000-0x00000000acd56000) (0MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000acd56000-0x00000000acd57000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000acd57000-0x00000000acd87000) (0MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000acd87000-0x00000000acd8a000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000acd8a000-0x00000000ace8c000) (1MB)
[ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000ace8c000-0x00000000ace90000) (0MB)
[ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x00000000ace90000-0x00000000ace93000) (0MB)
[ 0.000000] efi: mem53: type=7, attr=0xf, range=[0x00000000ace93000-0x00000000ace96000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x00000000ace96000-0x00000000acefe000) (0MB)
[ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x00000000acefe000-0x00000000acf04000) (0MB)
[ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x00000000acf04000-0x00000000acf0d000) (0MB)
[ 0.000000] efi: mem57: type=7, attr=0xf, range=[0x00000000acf0d000-0x00000000acf16000) (0MB)
[ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x00000000acf16000-0x00000000acf4d000) (0MB)
[ 0.000000] efi: mem59: type=7, attr=0xf, range=[0x00000000acf4d000-0x00000000acf4e000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x00000000acf4e000-0x00000000acf51000) (0MB)
[ 0.000000] efi: mem61: type=7, attr=0xf, range=[0x00000000acf51000-0x00000000acf52000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x00000000acf52000-0x00000000acf58000) (0MB)
[ 0.000000] efi: mem63: type=7, attr=0xf, range=[0x00000000acf58000-0x00000000acf59000) (0MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x00000000acf59000-0x00000000acf5a000) (0MB)
[ 0.000000] efi: mem65: type=7, attr=0xf, range=[0x00000000acf5a000-0x00000000acf5b000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x00000000acf5b000-0x00000000acf61000) (0MB)
[ 0.000000] efi: mem67: type=7, attr=0xf, range=[0x00000000acf61000-0x00000000acf62000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x00000000acf62000-0x00000000acf95000) (0MB)
[ 0.000000] efi: mem69: type=7, attr=0xf, range=[0x00000000acf95000-0x00000000acf96000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000acf96000-0x00000000aeabf000) (27MB)
[ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x00000000aeabf000-0x00000000aef6b000) (4MB)
[ 0.000000] efi: mem72: type=3, attr=0xf, range=[0x00000000aef6b000-0x00000000af2bf000) (3MB)
[ 0.000000] efi: mem73: type=5, attr=0x800000000000000f, range=[0x00000000af2bf000-0x00000000af5df000) (3MB)
[ 0.000000] efi: mem74: type=5, attr=0x800000000000000f, range=[0x00000000af5df000-0x00000000af6bf000) (0MB)
[ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000af6bf000-0x00000000af765000) (0MB)
[ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000af765000-0x00000000af8bf000) (1MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000af8bf000-0x00000000afa65000) (1MB)
[ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000afa65000-0x00000000afabf000) (0MB)
[ 0.000000] efi: mem79: type=10, attr=0xf, range=[0x00000000afabf000-0x00000000afb54000) (0MB)
[ 0.000000] efi: mem80: type=10, attr=0xf, range=[0x00000000afb54000-0x00000000afbbf000) (0MB)
[ 0.000000] efi: mem81: type=9, attr=0xf, range=[0x00000000afbbf000-0x00000000afbdb000) (0MB)
[ 0.000000] efi: mem82: type=9, attr=0xf, range=[0x00000000afbdb000-0x00000000afbff000) (0MB)
[ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x00000000afbff000-0x00000000afc00000) (0MB)
[ 0.000000] efi: mem84: type=7, attr=0xf, range=[0x0000000100000000-0x00000001af000000) (2800MB)
[ 0.000000] efi: mem85: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem86: type=0, attr=0x0, range=[0x00000000afc00000-0x00000000d0000000) (516MB)
[ 0.000000] efi: mem87: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
[ 0.000000] efi: mem91: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem92: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc31000) (0MB)
[ 0.000000] efi: mem93: type=11, attr=0x8000000000000000, range=[0x00000000ffc31000-0x00000000ffc61000) (0MB)
[ 0.000000] efi: mem94: type=11, attr=0x8000000000000000, range=[0x00000000ffc61000-0x0000000100000000) (3MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g6 Notebook PC/184A, BIOS F.12 08/30/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1af000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000AFBBD000 mask FFFFFFFFF000 uncachable
[ 0.000000] 4 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001af000000 aka 6896M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xafc00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000028000] 28000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xafbfffff]
[ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xafbfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xafbfffff @ [mem 0x1fffe000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1aeffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] [mem 0x180000000-0x1aeffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x1aeffffff @ [mem 0xaef69000-0xaef6afff]
[ 0.000000] RAMDISK: [mem 0x3e187000-0x3fffafff]
[ 0.000000] ACPI: RSDP 00000000afbfe014 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000afbfe120 0009C (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 00000000afbfc000 0010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 00000000afbe6000 11F09 (v01 HPQOEM 184A F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000afb7a000 00040
[ 0.000000] ACPI: UEFI 00000000afbfd000 00236 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 00000000afbfb000 00038 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 00000000afbfa000 00084 (v03 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 00000000afbf9000 0003C (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 00000000afbf8000 000A5 (v32 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: BOOT 00000000afbe5000 00028 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: SPCR 00000000afbe4000 00050 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: WDRT 00000000afbe3000 00047 (v01 HPQOEM 184A 00000000 HP 00040000)
[ 0.000000] ACPI: WDAT 00000000afbe2000 001AC (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 00000000afbe0000 00044 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 00000000afbdf000 00055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 00000000afbde000 00B9C (v01 HPQOEM 184A 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000afbdc000 01ECC (v02 HPQOEM 184A 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 00000000afbdb000 00038 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001aeffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1aeffffff]
[ 0.000000] NODE_DATA [mem 0x1aefec000-0x1aeffffff]
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff8801a8e00000-ffff8801addfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1aeffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0006dfff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0xa6049fff]
[ 0.000000] node 0: [mem 0xa684b000-0xaf2befff]
[ 0.000000] node 0: [mem 0xafbff000-0xafbfffff]
[ 0.000000] node 0: [mem 0x100000000-0x1aeffffff]
[ 0.000000] On node 0 totalpages: 1432117
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 94 pages reserved
[ 0.000000] DMA zone: 3808 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 697079 pages, LIFO batch:31
[ 0.000000] Normal zone: 9800 pages used for memmap
[ 0.000000] Normal zone: 707000 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000006e000 - 0000000000070000
[ 0.000000] PM: Registered nosave memory: 0000000000088000 - 00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000a604a000 - 00000000a684b000
[ 0.000000] PM: Registered nosave memory: 00000000af2bf000 - 00000000afabf000
[ 0.000000] PM: Registered nosave memory: 00000000afabf000 - 00000000afbbf000
[ 0.000000] PM: Registered nosave memory: 00000000afbbf000 - 00000000afbff000
[ 0.000000] PM: Registered nosave memory: 00000000afc00000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801aec00000 s81856 r8192 d20544 u524288
[ 0.000000] pcpu-alloc: s81856 r8192 d20544 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1407887
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.1-desktop root=UUID=917de788-9015-42c7-bf0f-1e6497287438 ro resume=/dev/disk/by-id/ata-Hitachi_HTS547575A9E384_J2140059F2HKYA-part8 splash=silent quiet showopts
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 9c000000
[ 0.000000] PM: Registered nosave memory: 000000009c000000 - 00000000a0000000
[ 0.000000] Memory: 5418072k/7061504k available (5770k kernel code, 1333036k absent, 310396k reserved, 5184k data, 992k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 23068672 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 1896.470 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3792.94 BogoMIPS (lpj=1896470)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.007850] Security Framework initialized
[ 0.007868] AppArmor: AppArmor initialized
[ 0.008612] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011441] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012744] Mount-cache hash table entries: 256
[ 0.012954] Initializing cgroup subsys cpuacct
[ 0.012957] Initializing cgroup subsys memory
[ 0.012975] Initializing cgroup subsys devices
[ 0.012977] Initializing cgroup subsys freezer
[ 0.012978] Initializing cgroup subsys net_cls
[ 0.012980] Initializing cgroup subsys blkio
[ 0.012982] Initializing cgroup subsys perf_event
[ 0.012984] Initializing cgroup subsys hugetlb
[ 0.013011] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[ 0.013015] tseg: 00afc00000
[ 0.013017] CPU: Physical Processor ID: 0
[ 0.013018] CPU: Processor Core ID: 0
[ 0.013020] mce: CPU supports 7 MCE banks
[ 0.013036] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.013036] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.013036] tlb_flushall_shift: 5
[ 0.013136] Freeing SMP alternatives: 20k freed
[ 0.013998] ACPI: Core revision 20120913
[ 0.036567] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046554] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.147933] Performance Events:
[ 0.147934] perf: AMD core performance counters detected
[ 0.147938] AMD PMU driver.
[ 0.147940] ... version: 0
[ 0.147941] ... bit width: 48
[ 0.147942] ... generic registers: 6
[ 0.147944] ... value mask: 0000ffffffffffff
[ 0.147945] ... max period: 00007fffffffffff
[ 0.147946] ... fixed-purpose events: 0
[ 0.147948] ... event mask: 000000000000003f
[ 0.155397] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.168515] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[ 0.184249] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[ 0.157099] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.199206] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[ 0.201361] Brought up 4 CPUs
[ 0.201371] smpboot: Total of 4 processors activated (15171.76 BogoMIPS)
[ 0.203573] devtmpfs: initialized
[ 0.208588] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[ 0.208596] PM: Registering ACPI NVS region [mem 0xafabf000-0xafbbefff] (1048576 bytes)
[ 0.208989] RTC time: 15:39:06, date: 03/31/13
[ 0.209142] NET: Registered protocol family 16
[ 0.209758] ACPI: bus type pci registered
[ 0.209999] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.210007] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.226346] PCI: Using configuration type 1 for base access
[ 0.229665] bio: create slab <bio-0> at 0
[ 0.229944] ACPI: Added _OSI(Module Device)
[ 0.229950] ACPI: Added _OSI(Processor Device)
[ 0.229955] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.229960] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.236122] ACPI: EC: Look up EC in DSDT
[ 0.242889] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.257303] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.351496] ACPI: Interpreter enabled
[ 0.351511] ACPI: (supports S0 S3 S4 S5)
[ 0.351595] ACPI: Using IOAPIC for interrupt routing
[ 1.171527] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[ 1.171830] ACPI: No dock devices found.
[ 1.171835] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.172082] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.172292] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf9ff])
[ 1.172298] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 1.172334] PCI host bridge to bus 0000:00
[ 1.172337] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.172340] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.172343] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.172345] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.172348] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 1.172350] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 1.172352] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 1.172355] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.172357] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.172359] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.172361] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.172364] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.172366] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.172368] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 1.172370] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 1.172373] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 1.172375] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 1.172377] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 1.172387] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 1.172460] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
[ 1.172469] pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 1.172476] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 1.172482] pci 0000:00:01.0: reg 18: [mem 0xf0400000-0xf043ffff]
[ 1.172520] pci 0000:00:01.0: supports D1 D2
[ 1.172536] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 1.172544] pci 0000:00:01.1: reg 10: [mem 0xf0444000-0xf0447fff]
[ 1.172599] pci 0000:00:01.1: supports D1 D2
[ 1.172620] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 1.172665] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.172703] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 1.172747] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 1.172804] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 1.172824] pci 0000:00:10.0: reg 10: [mem 0xf0448000-0xf0449fff 64bit]
[ 1.172923] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 1.172964] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 1.172983] pci 0000:00:10.1: reg 10: [mem 0xf044a000-0xf044bfff 64bit]
[ 1.173079] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 1.173117] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[ 1.173135] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 1.173144] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 1.173153] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 1.173162] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 1.173172] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 1.173181] pci 0000:00:11.0: reg 24: [mem 0xf0450000-0xf04507ff]
[ 1.173236] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 1.173249] pci 0000:00:12.0: reg 10: [mem 0xf044f000-0xf044ffff]
[ 1.173315] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 1.173767] pci 0000:00:12.2: reg 10: [mem 0xf044e000-0xf044e0ff]
[ 1.176082] pci 0000:00:12.2: supports D1 D2
[ 1.176084] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.176109] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 1.176122] pci 0000:00:13.0: reg 10: [mem 0xf044d000-0xf044dfff]
[ 1.176188] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 1.176578] pci 0000:00:13.2: reg 10: [mem 0xf044c000-0xf044c0ff]
[ 1.178899] pci 0000:00:13.2: supports D1 D2
[ 1.178902] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.178926] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 1.178997] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 1.179016] pci 0000:00:14.2: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
[ 1.179079] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 1.179095] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 1.179165] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 1.179214] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 1.179281] pci 0000:00:15.0: supports D1 D2
[ 1.179306] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 1.179373] pci 0000:00:15.1: supports D1 D2
[ 1.179401] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 1.179423] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 1.179445] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 1.179466] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 1.179492] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 1.179512] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 1.179592] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[ 1.179608] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.179621] pci 0000:01:00.0: reg 18: [mem 0xf0300000-0xf031ffff 64bit]
[ 1.179630] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
[ 1.179645] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 1.179685] pci 0000:01:00.0: supports D1 D2
[ 1.180901] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.180910] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 1.180915] pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 1.180920] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.184272] pci 0000:02:00.0: [1814:3290] type 00 class 0x028000
[ 1.184318] pci 0000:02:00.0: reg 10: [mem 0xf0210000-0xf021ffff]
[ 1.186065] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 1.186100] pci 0000:02:00.1: [1814:3298] type 00 class 0x0d1100
[ 1.186113] pci 0000:02:00.1: reg 10: [mem 0xf0200000-0xf020ffff]
[ 1.186198] pci 0000:02:00.1: supports D1
[ 1.186200] pci 0000:02:00.1: PME# supported from D0 D1 D3hot
[ 1.189576] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.189587] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 1.189669] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 1.189679] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.189682] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.189685] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.189687] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 1.189690] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 1.189692] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 1.189695] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 1.189697] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.189700] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.189702] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 1.189704] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.189707] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 1.189709] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 1.189711] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 1.189714] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 1.189716] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 1.189719] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 1.189804] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000
[ 1.189826] pci 0000:04:00.0: reg 10: [mem 0xf0100000-0xf0100fff]
[ 1.189959] pci 0000:04:00.0: supports D1 D2
[ 1.189961] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 1.191929] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 1.191942] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 1.192026] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 1.192046] pci 0000:05:00.0: reg 10: [io 0x2000-0x20ff]
[ 1.192076] pci 0000:05:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 1.192096] pci 0000:05:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 1.192177] pci 0000:05:00.0: supports D1 D2
[ 1.192180] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.193924] pci 0000:00:15.1: PCI bridge to [bus 05]
[ 1.193935] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 1.193940] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 1.193975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.194168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[ 1.194232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 1.194292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 1.194343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
[ 1.194802] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.195111] pci0000:00: ACPI _OSC control (0x19) granted
[ 1.208582] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.208670] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.208769] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.208869] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.208949] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.209000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.209052] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.209104] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.209198] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.209208] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.209211] vgaarb: loaded
[ 1.209212] vgaarb: bridge control possible 0000:01:00.0
[ 1.209213] vgaarb: no bridge control possible 0000:00:01.0
[ 1.209432] SCSI subsystem initialized
[ 1.209434] ACPI: bus type scsi registered
[ 1.209505] libata version 3.00 loaded.
[ 1.209530] ACPI: bus type usb registered
[ 1.209556] usbcore: registered new interface driver usbfs
[ 1.209567] usbcore: registered new interface driver hub
[ 1.209602] usbcore: registered new device driver usb
[ 1.209683] PCI: Using ACPI for IRQ routing
[ 1.211447] PCI: pci_cache_line_size set to 64 bytes
[ 1.211540] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
[ 1.211543] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 1.211545] e820: reserve RAM buffer [mem 0xa604a000-0xa7ffffff]
[ 1.211546] e820: reserve RAM buffer [mem 0xaf2bf000-0xafffffff]
[ 1.211548] e820: reserve RAM buffer [mem 0xafc00000-0xafffffff]
[ 1.211550] e820: reserve RAM buffer [mem 0x1af000000-0x1afffffff]
[ 1.211662] NetLabel: Initializing
[ 1.211664] NetLabel: domain hash size = 128
[ 1.211665] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.211681] NetLabel: unlabeled traffic allowed by default
[ 1.211721] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.211725] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.213754] Switching to clocksource hpet
[ 1.216602] AppArmor: AppArmor Filesystem Enabled
[ 1.216631] pnp: PnP ACPI init
[ 1.216645] ACPI: bus type pnp registered
[ 1.216839] pnp 00:00: [bus 00-ff]
[ 1.216843] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.216845] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.216848] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.216850] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.216906] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.216910] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.216912] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.216915] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.216917] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.216919] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.216921] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.216924] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.216926] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.216928] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.216930] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.216932] pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
[ 1.216935] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
[ 1.216937] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[ 1.216939] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.216980] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.217050] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 1.217052] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 1.217054] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 1.217056] pnp 00:01: [mem 0xfec10000-0xfec10fff]
[ 1.217059] pnp 00:01: [mem 0xfed80000-0xfed81fff]
[ 1.217103] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.217106] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.217108] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.217111] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 1.217114] system 00:01: [mem 0xfed80000-0xfed81fff] could not be reserved
[ 1.217118] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.217374] pnp 00:02: [irq 0 disabled]
[ 1.217385] pnp 00:02: [irq 8]
[ 1.217387] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 1.217413] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.217483] pnp 00:03: [io 0x0000-0x000f]
[ 1.217485] pnp 00:03: [io 0x0081-0x008f]
[ 1.217488] pnp 00:03: [io 0x00c0-0x00df]
[ 1.217490] pnp 00:03: [dma 4]
[ 1.217516] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.217526] pnp 00:04: [io 0x00f0-0x00fe]
[ 1.217545] pnp 00:04: [irq 13]
[ 1.217571] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.217636] pnp 00:05: [io 0x0070-0x0071]
[ 1.217662] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.217673] pnp 00:06: [io 0x0061]
[ 1.217696] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.217712] pnp 00:07: [io 0x0060]
[ 1.217715] pnp 00:07: [io 0x0064]
[ 1.217733] pnp 00:07: [irq 1]
[ 1.217765] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 1.217793] pnp 00:08: [irq 12]
[ 1.217826] pnp 00:08: Plug and Play ACPI device, IDs SYN1e64 SYN1e00 SYN0002 PNP0f13 (active)
[ 1.217840] pnp 00:09: [io 0x0010-0x001f]
[ 1.217842] pnp 00:09: [io 0x002e-0x002f]
[ 1.217844] pnp 00:09: [io 0x0072-0x0073]
[ 1.217846] pnp 00:09: [io 0x0080]
[ 1.217871] pnp 00:09: [io 0x00b0-0x00b1]
[ 1.217874] pnp 00:09: [io 0x0092]
[ 1.217877] pnp 00:09: [io 0x0400-0x04cf]
[ 1.217880] pnp 00:09: [io 0x04d0-0x04d1]
[ 1.217882] pnp 00:09: [io 0x04d6]
[ 1.217884] pnp 00:09: [io 0x0680-0x06ff]
[ 1.217886] pnp 00:09: [io 0x077a]
[ 1.217888] pnp 00:09: [io 0x0c00-0x0c01]
[ 1.217890] pnp 00:09: [io 0x0c14]
[ 1.217892] pnp 00:09: [io 0x0c50-0x0c52]
[ 1.217893] pnp 00:09: [io 0x0c6c]
[ 1.217895] pnp 00:09: [io 0x0c6f]
[ 1.217897] pnp 00:09: [io 0x0cd0-0x0cdb]
[ 1.217899] pnp 00:09: [io 0x0840-0x0847]
[ 1.217901] pnp 00:09: [io 0x0380-0x0387]
[ 1.217948] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 1.217951] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 1.217954] system 00:09: [io 0x04d6] has been reserved
[ 1.217956] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 1.217959] system 00:09: [io 0x077a] has been reserved
[ 1.217961] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 1.217964] system 00:09: [io 0x0c14] has been reserved
[ 1.217966] system 00:09: [io 0x0c50-0x0c52] has been reserved
[ 1.217969] system 00:09: [io 0x0c6c] has been reserved
[ 1.217971] system 00:09: [io 0x0c6f] has been reserved
[ 1.217974] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
[ 1.217976] system 00:09: [io 0x0840-0x0847] has been reserved
[ 1.217979] system 00:09: [io 0x0380-0x0387] has been reserved
[ 1.217982] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.218049] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 1.218051] pnp 00:0a: [mem 0xffc00000-0xffffffff]
[ 1.218092] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.218095] system 00:0a: [mem 0xffc00000-0xffffffff] has been reserved
[ 1.218098] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.218487] pnp 00:0b: [irq 23]
[ 1.218516] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 1.418375] pnp: PnP ACPI: found 12 devices
[ 1.418381] ACPI: ACPI bus type pnp unregistered
[ 1.425989] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 1.426029] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0320000-0xf033ffff pref]
[ 1.426034] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.426037] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 1.426041] pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 1.426045] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.426050] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.426054] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 1.426059] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 1.426070] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 1.426075] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 1.426082] pci 0000:00:15.1: PCI bridge to [bus 05]
[ 1.426086] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 1.426091] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 1.426130] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.426133] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.426135] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.426138] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.426140] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.426142] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.426145] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 1.426147] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 1.426149] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 1.426151] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 1.426153] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 1.426156] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 1.426158] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 1.426160] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 1.426162] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 1.426164] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 1.426167] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 1.426169] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 1.426171] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf03fffff]
[ 1.426173] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.426176] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 1.426179] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 1.426181] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 1.426183] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.426185] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.426187] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.426190] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.426192] pci_bus 0000:03: resource 10 [mem 0x000d0000-0x000d3fff]
[ 1.426194] pci_bus 0000:03: resource 11 [mem 0x000d4000-0x000d7fff]
[ 1.426196] pci_bus 0000:03: resource 12 [mem 0x000d8000-0x000dbfff]
[ 1.426198] pci_bus 0000:03: resource 13 [mem 0x000dc000-0x000dffff]
[ 1.426200] pci_bus 0000:03: resource 14 [mem 0x000e0000-0x000e3fff]
[ 1.426202] pci_bus 0000:03: resource 15 [mem 0x000e4000-0x000e7fff]
[ 1.426205] pci_bus 0000:03: resource 16 [mem 0x000e8000-0x000ebfff]
[ 1.426207] pci_bus 0000:03: resource 17 [mem 0x000ec000-0x000effff]
[ 1.426209] pci_bus 0000:03: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 1.426211] pci_bus 0000:03: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 1.426213] pci_bus 0000:03: resource 20 [mem 0xfed45000-0xffffffff]
[ 1.426216] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 1.426218] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 1.426220] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf00fffff]
[ 1.426388] NET: Registered protocol family 2
[ 1.427330] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.430012] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.430323] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.430372] TCP: reno registered
[ 1.430391] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.430445] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.430759] NET: Registered protocol family 1
[ 1.430776] pci 0000:00:01.0: Boot video device
[ 2.035681] PCI: CLS 64 bytes, default 64
[ 2.035810] Unpacking initramfs...
[ 2.611865] Freeing initrd memory: 31184k freed
[ 2.620945] PCI-DMA: Disabling AGP.
[ 2.620949] PCI-DMA: More than 4GB of RAM and no IOMMU
[ 2.620949] falling back to iommu=soft.
[ 2.620952] More than 4GB of memory but GART IOMMU not available.
[ 2.620953] falling back to iommu=soft.
[ 2.620954] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.620958] software IO TLB [mem 0xa7942000-0xab941fff] (64MB) mapped at [ffff8800a7942000-ffff8800ab941fff]
[ 2.621061] Simple Boot Flag at 0x44 set to 0x1
[ 2.621220] LVT offset 0 assigned for vector 0x400
[ 2.621259] perf: AMD IBS detected (0x000000ff)
[ 2.622471] audit: initializing netlink socket (disabled)
[ 2.622504] type=2000 audit(1364744348.511:1): initialized
[ 2.682237] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.683743] VFS: Disk quotas dquot_6.5.2
[ 2.683855] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.684493] msgmni has been set to 10742
[ 2.685160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.685236] io scheduler noop registered
[ 2.685244] io scheduler deadline registered
[ 2.685324] io scheduler cfq registered (default)
[ 2.685605] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 2.686215] efifb: probing for efifb
[ 2.687620] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90009b00000, using 4224k, total 4224k
[ 2.687625] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 2.687629] efifb: scrolling: redraw
[ 2.687634] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.696431] Console: switching to colour frame buffer device 170x48
[ 2.704716] fb0: EFI VGA frame buffer device
[ 2.704809] GHES: HEST is not enabled!
[ 2.705019] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 2.709486] Non-volatile memory driver v1.3
[ 2.709491] Linux agpgart interface v0.103
[ 2.709790] ahci 0000:00:11.0: version 3.0
[ 2.709917] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
[ 2.710016] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.710026] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 2.710872] scsi0 : ahci
[ 2.711112] scsi1 : ahci
[ 2.711255] ata1: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450100 irq 41
[ 2.711261] ata2: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450180 irq 41
[ 2.711448] libphy: Fixed MDIO Bus: probed
[ 2.711455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.711530] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.711547] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.711582] QUIRK: Enable AMD PLL fix
[ 2.711588] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.711618] ehci_hcd 0000:00:12.2: debug port 1
[ 2.711689] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf044e000
[ 2.717364] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.717443] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.717451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.717458] usb usb1: Product: EHCI Host Controller
[ 2.717463] usb usb1: Manufacturer: Linux 3.7.10-1.1-desktop ehci_hcd
[ 2.717468] usb usb1: SerialNumber: 0000:00:12.2
[ 2.717923] hub 1-0:1.0: USB hub found
[ 2.717936] hub 1-0:1.0: 5 ports detected
[ 2.718554] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.718568] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.718579] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.718596] ehci_hcd 0000:00:13.2: debug port 1
[ 2.718650] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf044c000
[ 2.724353] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.724428] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.724435] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.724442] usb usb2: Product: EHCI Host Controller
[ 2.724447] usb usb2: Manufacturer: Linux 3.7.10-1.1-desktop ehci_hcd
[ 2.724452] usb usb2: SerialNumber: 0000:00:13.2
[ 2.724858] hub 2-0:1.0: USB hub found
[ 2.724870] hub 2-0:1.0: 5 ports detected
[ 2.725249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.725372] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.725387] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.725444] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf044f000
[ 2.780314] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.780326] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.780333] usb usb3: Product: OHCI Host Controller
[ 2.780339] usb usb3: Manufacturer: Linux 3.7.10-1.1-desktop ohci_hcd
[ 2.780344] usb usb3: SerialNumber: 0000:00:12.0
[ 2.780746] hub 3-0:1.0: USB hub found
[ 2.780774] hub 3-0:1.0: 5 ports detected
[ 2.781138] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.781156] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 2.781189] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf044d000
[ 2.836219] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.836230] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.836238] usb usb4: Product: OHCI Host Controller
[ 2.836244] usb usb4: Manufacturer: Linux 3.7.10-1.1-desktop ohci_hcd
[ 2.836249] usb usb4: SerialNumber: 0000:00:13.0
[ 2.836715] hub 4-0:1.0: USB hub found
[ 2.836743] hub 4-0:1.0: 5 ports detected
[ 2.837293] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.837519] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.845677] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.845745] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.846171] mousedev: PS/2 mouse device common for all mice
[ 2.846470] rtc_cmos 00:05: RTC can wake from S4
[ 2.846739] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.846799] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.846826] cpuidle: using governor ladder
[ 2.846830] cpuidle: using governor menu
[ 2.846840] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.846844] EFI Variables Facility v0.08 2004-May-17
[ 2.858986] Efi pstore disabled, enforce via pstore.backend=efi
[ 2.858990] On a broken BIOS, this can severely harm your systemOnly enable efi based pstore when you know what you are doing
[ 2.859511] usbcore: registered new interface driver usbhid
[ 2.859515] usbhid: USB HID core driver
[ 2.860025] TCP: cubic registered
[ 2.860165] NET: Registered protocol family 10
[ 2.860642] lib80211: common routines for IEEE802.11 drivers
[ 2.860647] lib80211_crypt: registered algorithm 'NULL'
[ 2.860664] Key type dns_resolver registered
[ 2.861476] PM: Checking hibernation image partition /dev/disk/by-id/ata-Hitachi_HTS547575A9E384_J2140059F2HKYA-part8
[ 2.911042] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.070729] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 3.170558] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.170588] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.172453] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[ 3.172459] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.174584] ata2.00: ATAPI: hp DVDRAM GT50N, MP01, max UDMA/100
[ 3.174601] ata1.00: configured for UDMA/100
[ 3.174819] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[ 3.175195] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.175199] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.175236] sd 0:0:0:0: [sda] Write Protect is off
[ 3.175239] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.175255] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.178811] ata2.00: configured for UDMA/100
[ 3.182787] scsi 1:0:0:0: CD-ROM hp DVDRAM GT50N MP01 PQ: 0 ANSI: 5
[ 3.218758] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda11
[ 3.219408] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.263518] usb 1-3: New USB device found, idVendor=064e, idProduct=e263
[ 3.263523] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.263526] usb 1-3: Product: HP TrueVision HD
[ 3.263528] usb 1-3: Manufacturer: SuYin
[ 3.263529] usb 1-3: SerialNumber: HF1016-T821-SE01-VH-R01.00.05
[ 3.599791] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 3.620697] tsc: Refined TSC clocksource calibration: 1896.454 MHz
[ 3.620705] Switching to clocksource tsc
[ 3.748668] usb 3-1: New USB device found, idVendor=046d, idProduct=c058
[ 3.748673] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.748676] usb 3-1: Product: USB Optical Mouse
[ 3.748678] usb 3-1: Manufacturer: Logitech
[ 3.755900] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input1
[ 3.756170] hid-generic 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
[ 3.825027] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400, board id: 2068, fw id: 1028260
[ 3.872635] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 3.876060] PM: Hibernation image not present or could not be loaded.
[ 3.876093] registered taskstats version 1
[ 3.877047] Magic number: 5:36:691
[ 3.877202] rtc_cmos 00:05: setting system clock to 2013-03-31 15:39:10 UTC (1364744350)
[ 3.878569] Freeing unused kernel memory: 992k freed
[ 3.878814] Write protecting the kernel read-only data: 10240k
[ 3.880080] Freeing unused kernel memory: 364k freed
[ 3.880579] Freeing unused kernel memory: 108k freed
[ 3.926474] emc: device handler registered
[ 3.928469] rdac: device handler registered
[ 3.930270] alua: device handler registered
[ 3.932178] hp_sw: device handler registered
[ 3.937701] systemd-udevd[110]: starting version 195
[ 3.950100] ACPI: acpi_idle registered with cpuidle
[ 3.975296] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 3.975307] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 3.975534] xhci_hcd 0000:00:10.0: irq 18, io mem 0xf0448000
[ 3.975609] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 3.975617] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 3.975625] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 3.975633] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 3.975640] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[ 3.975812] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.975816] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.975819] usb usb5: Product: xHCI Host Controller
[ 3.975822] usb usb5: Manufacturer: Linux 3.7.10-1.1-desktop xhci_hcd
[ 3.975825] usb usb5: SerialNumber: 0000:00:10.0
[ 3.975979] xHCI xhci_add_endpoint called for root hub
[ 3.975982] xHCI xhci_check_bandwidth called for root hub
[ 3.976019] hub 5-0:1.0: USB hub found
[ 3.976073] hub 5-0:1.0: 2 ports detected
[ 3.976308] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 3.976314] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 3.977124] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.977131] ACPI: Thermal Zone [THRM] (51 C)
[ 3.978943] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.978948] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.978952] usb usb6: Product: xHCI Host Controller
[ 3.978955] usb usb6: Manufacturer: Linux 3.7.10-1.1-desktop xhci_hcd
[ 3.978957] usb usb6: SerialNumber: 0000:00:10.0
[ 3.979112] xHCI xhci_add_endpoint called for root hub
[ 3.979116] xHCI xhci_check_bandwidth called for root hub
[ 3.979172] hub 6-0:1.0: USB hub found
[ 3.979202] hub 6-0:1.0: 2 ports detected
[ 3.986084] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 3.986096] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
[ 3.986303] xhci_hcd 0000:00:10.1: irq 17, io mem 0xf044a000
[ 3.986366] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
[ 3.986374] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 3.986381] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 3.986389] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 3.986397] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 3.986525] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.986530] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.986533] usb usb7: Product: xHCI Host Controller
[ 3.986536] usb usb7: Manufacturer: Linux 3.7.10-1.1-desktop xhci_hcd
[ 3.986539] usb usb7: SerialNumber: 0000:00:10.1
[ 3.986739] xHCI xhci_add_endpoint called for root hub
[ 3.986743] xHCI xhci_check_bandwidth called for root hub
[ 3.986780] hub 7-0:1.0: USB hub found
[ 3.986804] hub 7-0:1.0: 2 ports detected
[ 3.986975] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 3.986980] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[ 3.989709] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.989714] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.989718] usb usb8: Product: xHCI Host Controller
[ 3.989721] usb usb8: Manufacturer: Linux 3.7.10-1.1-desktop xhci_hcd
[ 3.989724] usb usb8: SerialNumber: 0000:00:10.1
[ 3.989867] xHCI xhci_add_endpoint called for root hub
[ 3.989869] xHCI xhci_check_bandwidth called for root hub
[ 3.989906] hub 8-0:1.0: USB hub found
[ 3.989927] hub 8-0:1.0: 2 ports detected
[ 6.382163] PM: Marking nosave pages: [mem 0x0006e000-0x0006ffff]
[ 6.382174] PM: Marking nosave pages: [mem 0x00088000-0x000fffff]
[ 6.382187] PM: Marking nosave pages: [mem 0xa604a000-0xa684afff]
[ 6.382320] PM: Marking nosave pages: [mem 0xaf2bf000-0xafbfefff]
[ 6.382472] PM: Marking nosave pages: [mem 0xafc00000-0xffffffff]
[ 6.385019] PM: Marking nosave pages: [mem 0x9c000000-0x9fffffff]
[ 6.386049] PM: Basic memory bitmaps created
[ 6.427453] PM: Basic memory bitmaps freed
[ 6.514336] PM: Starting manual resume from disk
[ 6.514342] PM: Hibernation image partition 8:8 present
[ 6.514344] PM: Looking for hibernation image.
[ 6.536600] PM: Image not found (code -22)
[ 6.536605] PM: Hibernation image not present or could not be loaded.
[ 9.980348] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.211042] EXT4-fs (sda5): re-mounted. Opts: (null)

danilec · 01.04.2013 00:09:07

danilec
Новичок
Неактивен

Зарегистрирован: 16.12.2012
Сообщений: 27
Репутация : [ 0 | 0 ]

Продолжение (Всё не вписывается в лимит) :

+ открыть спойлер

[ 11.033347] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
[ 11.086745] systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; suse)
[ 11.306640] systemd[1]: Inserted module 'autofs4'
[ 11.313824] systemd[1]: Set hostname to <linux-4oak.site>.
[ 12.134946] systemd[1]: Starting Collect Read-Ahead Data...
[ 12.140055] systemd[1]: Starting Replay Read-Ahead Data...
[ 12.144979] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 12.145065] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.145101] systemd[1]: Starting System Time Synchronized.
[ 12.145250] systemd[1]: Reached target System Time Synchronized.
[ 12.145272] systemd[1]: Starting Remote File Systems.
[ 12.145426] systemd[1]: Reached target Remote File Systems.
[ 12.145483] systemd[1]: Starting Syslog Socket.
[ 12.145601] systemd[1]: Listening on Syslog Socket.
[ 12.145620] systemd[1]: Starting Delayed Shutdown Socket.
[ 12.145688] systemd[1]: Listening on Delayed Shutdown Socket.
[ 12.145698] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 12.145756] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 12.145792] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 12.145940] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.145957] systemd[1]: Starting Encrypted Volumes.
[ 12.145998] systemd[1]: Reached target Encrypted Volumes.
[ 12.146085] systemd[1]: Starting udev Kernel Socket.
[ 12.146147] systemd[1]: Listening on udev Kernel Socket.
[ 12.146200] systemd[1]: Starting udev Control Socket.
[ 12.146259] systemd[1]: Listening on udev Control Socket.
[ 12.146277] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dHitachi_HTS547575A9E384_J2140059F2HKYA\x2dpart8.device...
[ 12.146334] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dHitachi_HTS547575A9E384_J2140059F2HKYA\x2dpart2.device...
[ 12.146408] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dHitachi_HTS547575A9E384_J2140059F2HKYA\x2dpart6.device...
[ 12.146516] systemd[1]: Expecting device dev-sda11.device...
[ 12.146604] systemd[1]: Starting Journal Socket.
[ 12.146694] systemd[1]: Listening on Journal Socket.
[ 12.146722] systemd[1]: Starting LSB: Set default boot entry if called...
[ 12.150912] systemd[1]: Mounting Huge Pages File System...
[ 12.153886] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.157803] systemd-readahead[260]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 12.160893] systemd[1]: Starting Create dynamic rule for /dev/root link...
[ 12.165033] systemd[1]: Starting Journal Service...
[ 12.168978] systemd[1]: Started Journal Service.
[ 14.790409] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 16.359115] systemd-udevd[311]: starting version 195
[ 18.703569] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 18.754244] ACPI: AC Adapter [ACAD] (on-line)
[ 18.754383] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 18.754659] ACPI: Power Button [PWRB]
[ 18.754729] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 18.755142] ACPI: Lid Switch [LID]
[ 18.755218] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 18.755286] ACPI: Power Button [PWRF]
[ 3.183452] ACPI: Invalid Power Resource to register!
[ 18.804885] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 18.804895] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a6ac2f88), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 18.804910] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120913/ac-122)
[ 18.843525] acpi device:00: registered as cooling_device4
[ 18.843584] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 18.843665] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 18.845332] acpi device:06: registered as cooling_device5
[ 18.845398] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 18.845448] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input7
[ 18.855254] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 18.855264] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a6ac2f88), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 18.855280] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120913/ac-122)
[ 18.855710] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 18.855720] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a6ac2f88), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 18.855734] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120913/ac-122)
[ 18.906064] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 18.906074] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a6ac2f88), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 18.906083] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[ 18.906091] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120913/ac-122)
[ 18.909606] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 19.051198] wmi: Mapper loaded
[ 19.061131] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.061206] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 19.079995] microcode: CPU0: patch_level=0x06001116
[ 19.255924] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 19.255930] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 19.256123] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 19.303556] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 19.303565] ACPI: Battery Slot [BAT0] (battery present)
[ 19.348180] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20120913/utaddress-251)
[ 19.348188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.531710] Linux video capture interface: v2.00
[ 19.615361] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:e263)
[ 19.621145] input: HP TrueVision HD as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9
[ 19.621235] usbcore: registered new interface driver uvcvideo
[ 19.621237] USB Video Class driver (1.1.1)
[ 19.778638] hp_accel: laptop model unknown, using default axes configuration
[ 19.782451] lis3lv02d: 8 bits 3DC sensor found
[ 19.818128] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[ 19.818351] Registered led device: hp::hddprotect
[ 19.859639] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 19.859643] AMD IOMMUv2 functionality not available on this system
[ 19.868313] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 19.868318] Disabling lock debugging due to kernel taint
[ 19.882786] <6>[fglrx] Maximum main memory to use for locked dma buffers: 5185 MBytes.
[ 19.883047] <6>[fglrx] vendor: 1002 device: 9903 count: 1
[ 19.883409] <6>[fglrx] vendor: 1002 device: 6840 count: 2
[ 19.883663] <6>[fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 19.884100] <6>[fglrx] ioport: bar 4, base 0x3000, size: 0x100
[ 19.884108] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 19.884225] <6>[fglrx] Kernel PAT support is enabled
[ 19.884266] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 2 minors
[ 19.910787] ALSA hda_intel.c:2902 Using LPIB position fix
[ 19.910793] ALSA hda_intel.c:3019 Force to non-snoop mode
[ 19.910855] snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
[ 19.914839] ALSA hda_intel.c:1680 Enable sync_write for stable communication
[ 19.918851] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
[ 19.919138] ALSA hda_intel.c:2902 Using LPIB position fix
[ 19.926893] ALSA hda_intel.c:1680 Enable sync_write for stable communication
[ 19.932749] ALSA patch_sigmatel.c:5663 mute LED gpio 10 polarity 0
[ 19.932757] ALSA hda_auto_parser.c:318 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 19.932760] ALSA hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.932762] ALSA hda_auto_parser.c:326 hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 19.932764] ALSA hda_auto_parser.c:327 mono: mono_out=0x0
[ 19.932766] ALSA hda_auto_parser.c:331 inputs:
[ 19.932768] ALSA hda_auto_parser.c:335 Mic=0xc
[ 19.933030] ALSA patch_sigmatel.c:3145 stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
[ 19.933314] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12
[ 19.938610] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 19.938770] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 19.957753] input: HP WMI hotkeys as /devices/virtual/input/input15
[ 19.982729] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 19.982946] r8169 0000:05:00.0: irq 53 for MSI/MSI-X
[ 19.983150] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000050000, 28:92:4a:4b:1f:77, XID 00c00000 IRQ 53
[ 20.075045] microcode: CPU0: new patch_level=0x06001119
[ 20.075115] microcode: CPU1: patch_level=0x06001116
[ 20.075210] microcode: CPU2: patch_level=0x06001116
[ 20.084112] microcode: CPU2: new patch_level=0x06001119
[ 20.084171] microcode: CPU3: patch_level=0x06001116
[ 20.084271] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 20.093645] kvm: Nested Virtualization enabled
[ 20.093651] kvm: Nested Paging enabled
[ 20.094753] acpi-cpufreq: overriding BIOS provided _PSD data
[ 20.139644] cfg80211: Calling CRDA to update world regulatory domain
[ 20.142411] cfg80211: World regulatory domain updated:
[ 20.142416] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.142419] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.142422] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.142424] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.142426] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.142428] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.156047] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.156328] Registered led device: rt2800pci-phy0::radio
[ 20.156349] Registered led device: rt2800pci-phy0::assoc
[ 20.156368] Registered led device: rt2800pci-phy0::quality
[ 21.334396] fuse init (API version 7.20)
[ 21.482291] Adding 7167996k swap on /dev/sda8. Priority:-1 extents:1 across:7167996k
[ 24.561782] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 24.600951] systemd-journald[265]: Received SIGUSR1
[ 24.866671] vboxguest: PCI device not found, probably running on physical hardware.
[ 24.871072] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 24.883522] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 24.886856] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.260397] Bluetooth: Core ver 2.16
[ 25.260415] NET: Registered protocol family 31
[ 25.260417] Bluetooth: HCI device and connection manager initialized
[ 25.260426] Bluetooth: HCI socket layer initialized
[ 25.260429] Bluetooth: L2CAP socket layer initialized
[ 25.260438] Bluetooth: SCO socket layer initialized
[ 25.263198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.263203] Bluetooth: BNEP filters: protocol multicast
[ 25.263215] Bluetooth: BNEP socket layer initialized
[ 25.353316] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.573810] r8169 0000:05:00.0 eth0: link down
[ 25.573871] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.582279] NET: Registered protocol family 17
[ 26.129489] fglrx_pci 0000:00:01.0: irq 54 for MSI/MSI-X
[ 26.130103] <6>[fglrx] Firegl kernel thread PID: 946
[ 26.130208] <6>[fglrx] Firegl kernel thread PID: 947
[ 26.130304] <6>[fglrx] Firegl kernel thread PID: 948
[ 26.130399] <6>[fglrx] IRQ 54 Enabled
[ 26.134417] <6>[fglrx] Gart USWC size:1280 M.
[ 26.134420] <6>[fglrx] Gart cacheable size:508 M.
[ 26.134424] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 26.134427] <6>[fglrx] Reserved FB block: Unshared offset:fbfc000, size:404000
[ 26.134429] <6>[fglrx] Reserved FB block: Unshared offset:1ffee000, size:12000
[ 26.184982] vgaarb: this pci device is not a vga device
[ 26.185048] vgaarb: this pci device is not a vga device
[ 26.185080] vgaarb: this pci device is not a vga device
[ 26.185112] vgaarb: this pci device is not a vga device
[ 26.185143] vgaarb: this pci device is not a vga device
[ 26.185176] vgaarb: this pci device is not a vga device
[ 26.185208] vgaarb: this pci device is not a vga device
[ 26.185240] vgaarb: this pci device is not a vga device
[ 26.185273] vgaarb: this pci device is not a vga device
[ 26.185306] vgaarb: this pci device is not a vga device
[ 26.185341] vgaarb: this pci device is not a vga device
[ 26.185374] vgaarb: this pci device is not a vga device
[ 26.185409] vgaarb: this pci device is not a vga device
[ 26.185444] vgaarb: this pci device is not a vga device
[ 26.185479] vgaarb: this pci device is not a vga device
[ 26.185515] vgaarb: this pci device is not a vga device
[ 26.185552] vgaarb: this pci device is not a vga device
[ 26.185589] vgaarb: this pci device is not a vga device
[ 26.185719] vgaarb: this pci device is not a vga device
[ 26.185768] vgaarb: this pci device is not a vga device
[ 26.185830] vgaarb: this pci device is not a vga device
[ 26.185872] vgaarb: this pci device is not a vga device
[ 26.185913] vgaarb: this pci device is not a vga device
[ 26.185990] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 26.186061] vgaarb: this pci device is not a vga device
[ 26.186104] vgaarb: this pci device is not a vga device
[ 26.186149] vgaarb: this pci device is not a vga device
[ 26.186193] vgaarb: this pci device is not a vga device
[ 26.830898] fglrx_pci 0000:01:00.0: irq 55 for MSI/MSI-X
[ 26.831613] <6>[fglrx] Firegl kernel thread PID: 953
[ 26.831706] <6>[fglrx] Firegl kernel thread PID: 954
[ 26.831845] <6>[fglrx] Firegl kernel thread PID: 955
[ 26.832030] <6>[fglrx] IRQ 55 Enabled
[ 26.886436] <6>[fglrx] Gart USWC size:1280 M.
[ 26.886439] <6>[fglrx] Gart cacheable size:508 M.
[ 26.886443] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 26.886446] <6>[fglrx] Reserved FB block: Unshared offset:f8fc000, size:404000
[ 26.886448] <6>[fglrx] Reserved FB block: Unshared offset:7fff4000, size:c000
[ 26.915069] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 27.097540] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 42.588045] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 42.721549] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 70.182943] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 70.846915] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 81.234148] wlan0: authenticate with 90:f6:52:bc:30:58
[ 81.237357] wlan0: send auth to 90:f6:52:bc:30:58 (try 1/3)
[ 81.239319] wlan0: authenticated
[ 81.239461] rt2800pci 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 81.240079] wlan0: associate with 90:f6:52:bc:30:58 (try 1/3)
[ 81.243594] wlan0: RX AssocResp from 90:f6:52:bc:30:58 (capab=0x431 status=0 aid=1)
[ 81.243884] wlan0: associated
[ 81.243937] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 81.244142] cfg80211: Calling CRDA for country: RU
[ 81.247229] cfg80211: Regulatory domain changed to country: RU
[ 81.247234] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 81.247237] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 81.247239] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 83.212349] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 83.319109] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 83.351302] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
[ 83.568690] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 83.818963] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 101.808386] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 114.175980] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 146.134588] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 210.048446] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 337.838566] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 593.414282] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1104.551942] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1438.654478] wlan0: deauthenticating from 90:f6:52:bc:30:58 by local choice (reason=3)
[ 1438.668014] cfg80211: Calling CRDA to update world regulatory domain
[ 1438.672203] cfg80211: World regulatory domain updated:
[ 1438.672208] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1438.672210] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1438.672212] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1438.672214] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1438.672216] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1438.672218] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1442.379190] PM: Syncing filesystems ... done.
[ 1442.676558] PM: Preparing system for mem sleep
[ 1442.677450] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1442.689993] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1442.700912] PM: Entering mem sleep
[ 1442.700981] Suspending console(s) (use no_console_suspend to debug)
[ 1442.701658] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1442.711491] sd 0:0:0:0: [sda] Stopping disk
[ 1442.783942] i8042 aux 00:08: wake-up capability disabled by ACPI
[ 1442.784151] i8042 kbd 00:07: wake-up capability enabled by ACPI
[ 1442.797479] <6>[fglrx] IRQ 55 Disabled
[ 1442.797568] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 1443.244179] <6>[fglrx] Suspending fglrx in kernel completed.
[ 1443.244180] <6>[fglrx] Power down the ASIC .
[ 1443.244652] <6>[fglrx] IRQ 54 Disabled
[ 1443.244678] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 1443.523342] <6>[fglrx] Suspending fglrx in kernel completed.
[ 1443.523343] <6>[fglrx] Power down the ASIC .
[ 1444.260191] PM: suspend of devices complete after 1561.783 msecs
[ 1444.260410] PM: late suspend of devices complete after 0.217 msecs
[ 1444.265091] pcieport 0000:00:15.1: wake-up capability enabled by ACPI
[ 1444.276295] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 1444.287046] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 1444.287076] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 1444.298027] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 1444.298076] xhci_hcd 0000:00:10.1: wake-up capability enabled by ACPI
[ 1444.309034] xhci_hcd 0000:00:10.0: wake-up capability enabled by ACPI
[ 1444.320020] PM: noirq suspend of devices complete after 59.710 msecs
[ 1444.320111] ACPI: Preparing to enter system sleep state S3
[ 1444.395122] PM: Saving platform NVS memory
[ 1444.399070] Disabling non-boot CPUs ...
[ 1444.400870] smpboot: CPU 1 is now offline
[ 1444.403004] smpboot: CPU 2 is now offline
[ 1444.404865] smpboot: CPU 3 is now offline
[ 1444.405671] ACPI: Low-level resume complete
[ 1444.405731] PM: Restoring platform NVS memory
[ 1444.406468] LVT offset 0 assigned for vector 0xf9
[ 1444.413906] microcode: CPU0: new patch_level=0x06001119
[ 1444.413967] Enabling non-boot CPUs ...
[ 1444.415119] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 1444.426199] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 1444.426200] perf: IBS APIC setup failed on cpu #1
[ 1444.428646] CPU1 is up
[ 1444.428794] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 1444.439881] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 1444.439882] perf: IBS APIC setup failed on cpu #2
[ 1444.451158] microcode: CPU2: new patch_level=0x06001119
[ 1444.451224] CPU2 is up
[ 1444.452601] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 1444.463693] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 1444.463694] perf: IBS APIC setup failed on cpu #3
[ 1444.466262] CPU3 is up
[ 1444.468078] ACPI: Waking up from system sleep state S3
[ 1444.760383] xhci_hcd 0000:00:10.0: wake-up capability disabled by ACPI
[ 1444.771382] xhci_hcd 0000:00:10.1: wake-up capability disabled by ACPI
[ 1444.771443] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 1444.782307] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 1444.782336] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 1444.793312] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 1444.828365] PM: noirq resume of devices complete after 90.090 msecs
[ 1444.828590] PM: early resume of devices complete after 0.143 msecs
[ 1444.828868] snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
[ 1444.830242] pcieport 0000:00:15.1: wake-up capability disabled by ACPI
[ 1444.834462] <6>[fglrx] Power up the ASIC
[ 1444.834475] <6>[fglrx] Preparing resume fglrx in kernel.
[ 1444.842192] <6>[fglrx] Resuming fglrx in kernel completed.
[ 1444.842246] <6>[fglrx] IRQ 54 Enabled
[ 1444.901757] <6>[fglrx] Power up the ASIC
[ 1444.901828] <6>[fglrx] Preparing resume fglrx in kernel.
[ 1444.911408] <6>[fglrx] Resuming fglrx in kernel completed.
[ 1444.911458] <6>[fglrx] IRQ 55 Enabled
[ 1445.092764] usb 1-3: reset high-speed USB device number 3 using ehci_hcd
[ 1445.133663] ata2: SATA link down (SStatus 0 SControl 300)
[ 1445.170015] i8042 kbd 00:07: wake-up capability disabled by ACPI
[ 1450.279702] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1450.283265] ata1.00: configured for UDMA/100
[ 1450.294681] sd 0:0:0:0: [sda] Starting disk
[ 1450.429318] ata2: SATA link down (SStatus 0 SControl 300)
[ 1450.429326] ata2: limiting SATA link speed to 1.5 Gbps
[ 1455.724935] ata2: SATA link down (SStatus 0 SControl 310)
[ 1455.724942] ata2.00: disabled
[ 1455.736252] ata2.00: detaching (SCSI 1:0:0:0)
[ 1455.760098] PM: resume of devices complete after 10950.873 msecs
[ 1455.771079] PM: Finishing wakeup.
[ 1455.771081] Restarting tasks ... done.
[ 1455.803544] video LNXVIDEO:00: Restoring backlight state
[ 1455.815279] video LNXVIDEO:01: Restoring backlight state
[ 1456.125722] ndiswrapper version 1.58rc1 loaded (smp=yes, preempt=yes)
[ 1456.164174] usbcore: registered new interface driver ndiswrapper
[ 1456.192118] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1456.380718] r8169 0000:05:00.0 eth0: link down
[ 1456.380800] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1462.175059] wlan0: authenticate with 90:f6:52:bc:30:58
[ 1462.178521] wlan0: send auth to 90:f6:52:bc:30:58 (try 1/3)
[ 1462.180402] wlan0: authenticated
[ 1462.180549] rt2800pci 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 1462.181439] wlan0: associate with 90:f6:52:bc:30:58 (try 1/3)
[ 1462.184022] wlan0: RX AssocResp from 90:f6:52:bc:30:58 (capab=0x431 status=0 aid=1)
[ 1462.184301] wlan0: associated
[ 1462.184349] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1462.184434] cfg80211: Calling CRDA for country: RU
[ 1462.187974] cfg80211: Regulatory domain changed to country: RU
[ 1462.187980] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1462.187983] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1462.187985] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 1463.419912] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1463.599637] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 1463.662071] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
[ 1463.849499] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 1464.100342] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 1494.371362] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1526.316092] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1590.204174] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1717.979060] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 1973.527429] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 2484.622989] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 2801.733256] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2802.733047] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2804.731890] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2806.727412] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2807.725503] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2846.665821] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2847.665765] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2886.602878] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 2887.602929] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3196.061592] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3197.061485] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3199.060691] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3201.055199] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3202.054759] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3505.520644] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3506.519616] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3506.812046] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 3508.518311] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3510.514769] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3819.973330] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3820.973312] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3822.972416] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3824.967097] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 3825.966906] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 4334.846609] wlan0: deauthenticating from 90:f6:52:bc:30:58 by local choice (reason=3)
[ 4334.859551] cfg80211: Calling CRDA to update world regulatory domain
[ 4334.864331] cfg80211: World regulatory domain updated:
[ 4334.864336] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4334.864340] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4334.864342] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4334.864345] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4334.864348] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4334.864350] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4338.307108] PM: Syncing filesystems ... done.
[ 4338.435561] PM: Preparing system for mem sleep
[ 4338.436127] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 4338.447963] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 4338.458897] PM: Entering mem sleep
[ 4338.458970] Suspending console(s) (use no_console_suspend to debug)
[ 4338.459622] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4338.519609] i8042 aux 00:08: wake-up capability disabled by ACPI
[ 4338.519633] i8042 kbd 00:07: wake-up capability enabled by ACPI
[ 4338.534985] <6>[fglrx] IRQ 55 Disabled
[ 4338.535047] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 4338.535744] sd 0:0:0:0: [sda] Stopping disk
[ 4338.991075] <6>[fglrx] Suspending fglrx in kernel completed.
[ 4338.991076] <6>[fglrx] Power down the ASIC .
[ 4338.991470] <6>[fglrx] IRQ 54 Disabled
[ 4338.991478] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 4339.265597] <6>[fglrx] Suspending fglrx in kernel completed.
[ 4339.265598] <6>[fglrx] Power down the ASIC .
[ 4340.134152] PM: suspend of devices complete after 1677.952 msecs
[ 4340.134366] PM: late suspend of devices complete after 0.211 msecs
[ 4340.139905] pcieport 0000:00:15.1: wake-up capability enabled by ACPI
[ 4340.151156] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 4340.161859] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 4340.161889] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 4340.172840] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 4340.172890] xhci_hcd 0000:00:10.1: wake-up capability enabled by ACPI
[ 4340.183847] xhci_hcd 0000:00:10.0: wake-up capability enabled by ACPI
[ 4340.194865] PM: noirq suspend of devices complete after 60.601 msecs
[ 4340.194957] ACPI: Preparing to enter system sleep state S3
[ 4340.268942] PM: Saving platform NVS memory
[ 4340.273004] Disabling non-boot CPUs ...
[ 4340.274757] smpboot: CPU 1 is now offline
[ 4340.276632] smpboot: CPU 2 is now offline
[ 4340.278664] smpboot: CPU 3 is now offline
[ 4340.279427] ACPI: Low-level resume complete
[ 4340.279484] PM: Restoring platform NVS memory
[ 4340.280189] LVT offset 0 assigned for vector 0xf9
[ 4340.289234] microcode: CPU0: new patch_level=0x06001119
[ 4340.289289] Enabling non-boot CPUs ...
[ 4340.290570] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 4340.301651] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 4340.301652] perf: IBS APIC setup failed on cpu #1
[ 4340.304146] CPU1 is up
[ 4340.304292] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 4340.315381] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 4340.315383] perf: IBS APIC setup failed on cpu #2
[ 4340.326686] microcode: CPU2: new patch_level=0x06001119
[ 4340.326755] CPU2 is up
[ 4340.328117] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 4340.339201] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 4340.339202] perf: IBS APIC setup failed on cpu #3
[ 4340.341815] CPU3 is up
[ 4340.343552] ACPI: Waking up from system sleep state S3
[ 4340.636166] xhci_hcd 0000:00:10.0: wake-up capability disabled by ACPI
[ 4340.647151] xhci_hcd 0000:00:10.1: wake-up capability disabled by ACPI
[ 4340.647211] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 4340.658095] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 4340.658121] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 4340.669059] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 4340.704144] PM: noirq resume of devices complete after 90.110 msecs
[ 4340.704362] PM: early resume of devices complete after 0.151 msecs
[ 4340.704578] snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
[ 4340.705969] pcieport 0000:00:15.1: wake-up capability disabled by ACPI
[ 4340.710658] <6>[fglrx] Power up the ASIC
[ 4340.710670] <6>[fglrx] Preparing resume fglrx in kernel.
[ 4340.718654] <6>[fglrx] Resuming fglrx in kernel completed.
[ 4340.718701] <6>[fglrx] IRQ 54 Enabled
[ 4340.781833] <6>[fglrx] Power up the ASIC
[ 4340.781901] <6>[fglrx] Preparing resume fglrx in kernel.
[ 4340.791341] <6>[fglrx] Resuming fglrx in kernel completed.
[ 4340.791392] <6>[fglrx] IRQ 55 Enabled
[ 4340.968525] usb 1-3: reset high-speed USB device number 3 using ehci_hcd
[ 4341.009466] ata2: SATA link down (SStatus 0 SControl 310)
[ 4341.051192] i8042 kbd 00:07: wake-up capability disabled by ACPI
[ 4342.844215] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4342.847953] ata1.00: configured for UDMA/100
[ 4342.859321] sd 0:0:0:0: [sda] Starting disk
[ 4342.883086] PM: resume of devices complete after 2182.579 msecs
[ 4342.883359] PM: Finishing wakeup.
[ 4342.883360] Restarting tasks ... done.
[ 4342.892572] video LNXVIDEO:00: Restoring backlight state
[ 4342.893613] video LNXVIDEO:01: Restoring backlight state
[ 4343.128632] usbcore: deregistering interface driver ndiswrapper
[ 4343.133052] ndiswrapper version 1.58rc1 loaded (smp=yes, preempt=yes)
[ 4343.148597] usbcore: registered new interface driver ndiswrapper
[ 4343.173724] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4343.361296] r8169 0000:05:00.0 eth0: link down
[ 4343.361344] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4348.731222] wlan0: authenticate with 90:f6:52:bc:30:58
[ 4348.734719] wlan0: send auth to 90:f6:52:bc:30:58 (try 1/3)
[ 4348.736651] wlan0: authenticated
[ 4348.736934] rt2800pci 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 4348.737640] wlan0: associate with 90:f6:52:bc:30:58 (try 1/3)
[ 4348.740052] wlan0: RX AssocResp from 90:f6:52:bc:30:58 (capab=0x431 status=0 aid=1)
[ 4348.740362] wlan0: associated
[ 4348.740406] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4348.740570] cfg80211: Calling CRDA for country: RU
[ 4348.743524] cfg80211: Regulatory domain changed to country: RU
[ 4348.743589] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4348.743593] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4348.743608] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 4349.993952] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4350.148853] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 4350.200629] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
[ 4350.399140] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 4350.648755] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 4380.944678] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4412.889342] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4476.777206] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4604.552362] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 4719.265395] usb 7-1: new high-speed USB device number 2 using xhci_hcd
[ 4719.284305] usb 7-1: New USB device found, idVendor=0718, idProduct=070a
[ 4719.284313] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4719.284318] usb 7-1: Product: TF10
[ 4719.284322] usb 7-1: Manufacturer: TDK LoR
[ 4719.284325] usb 7-1: SerialNumber: 0707274196D75F22
[ 4719.335141] Initializing USB Mass Storage driver...
[ 4719.335390] scsi2 : usb-storage 7-1:1.0
[ 4719.335534] usbcore: registered new interface driver usb-storage
[ 4719.335537] USB Mass Storage support registered.
[ 4720.420216] scsi 2:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4720.421440] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4721.805966] sd 2:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4721.806282] sd 2:0:0:0: [sdb] Write Protect is off
[ 4721.806292] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4721.806521] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4721.806526] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4721.808317] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4721.808326] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4721.828723] sdb: sdb1
[ 4721.830035] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4721.830041] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4721.830046] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 4728.927258] Btrfs loaded
[ 4728.989847] JFS: nTxBlock = 8192, nTxLock = 65536
[ 4729.017099] NILFS version 2 loaded
[ 4729.069336] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 4730.635739] device-mapper: uevent: version 1.0.3
[ 4730.635908] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 4768.336117] usb 7-1: USB disconnect, device number 2
[ 4769.738734] usb 7-1: new high-speed USB device number 3 using xhci_hcd
[ 4769.757726] usb 7-1: New USB device found, idVendor=0718, idProduct=070a
[ 4769.757734] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4769.757739] usb 7-1: Product: TF10
[ 4769.757742] usb 7-1: Manufacturer: TDK LoR
[ 4769.757746] usb 7-1: SerialNumber: 0707274196D75F22
[ 4769.760056] scsi3 : usb-storage 7-1:1.0
[ 4770.842340] scsi 3:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4770.842746] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 4772.221944] sd 3:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4772.222229] sd 3:0:0:0: [sdb] Write Protect is off
[ 4772.222241] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4772.222631] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.222640] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.224936] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.224942] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.245533] sdb: sdb1
[ 4772.246872] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.246879] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.246885] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 4773.468301] usb 7-1: USB disconnect, device number 3
[ 4775.720077] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[ 4775.739103] usb 5-2: New USB device found, idVendor=0718, idProduct=070a
[ 4775.739111] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4775.739116] usb 5-2: Product: TF10
[ 4775.739120] usb 5-2: Manufacturer: TDK LoR
[ 4775.739123] usb 5-2: SerialNumber: 0707274196D75F22
[ 4775.741519] scsi4 : usb-storage 5-2:1.0
[ 4776.823643] scsi 4:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4776.824832] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4778.203299] sd 4:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4778.203480] sd 4:0:0:0: [sdb] Write Protect is off
[ 4778.203485] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4778.203655] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.203662] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.205456] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.205460] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.225847] sdb: sdb1
[ 4778.227218] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.227226] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.227232] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4860.100612] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 5371.196140] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 6125.125322] usb 5-2: USB disconnect, device number 2
[ 6157.742101] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6158.742052] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6160.741202] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6162.736377] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6163.735351] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=41
[ 6393.386906] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 6933.700373] wlan0: deauthenticating from 90:f6:52:bc:30:58 by local choice (reason=3)
[ 6933.713461] cfg80211: Calling CRDA to update world regulatory domain
[ 6933.717736] cfg80211: World regulatory domain updated:
[ 6933.717742] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6933.717745] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6933.717748] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6933.717752] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6933.717754] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6933.717757] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6937.079271] PM: Syncing filesystems ... done.
[ 6937.291591] PM: Preparing system for mem sleep
[ 6937.292080] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6937.304159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6937.315071] PM: Entering mem sleep
[ 6937.315143] Suspending console(s) (use no_console_suspend to debug)
[ 6937.315816] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6937.375455] i8042 aux 00:08: wake-up capability disabled by ACPI
[ 6937.375480] i8042 kbd 00:07: wake-up capability enabled by ACPI
[ 6937.390950] <6>[fglrx] IRQ 55 Disabled
[ 6937.391035] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 6937.416365] sd 0:0:0:0: [sda] Stopping disk
[ 6937.842332] <6>[fglrx] Suspending fglrx in kernel completed.
[ 6937.842333] <6>[fglrx] Power down the ASIC .
[ 6937.842861] <6>[fglrx] IRQ 54 Disabled
[ 6937.842870] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 6938.117584] <6>[fglrx] Suspending fglrx in kernel completed.
[ 6938.117585] <6>[fglrx] Power down the ASIC .
[ 6939.525199] PM: suspend of devices complete after 2213.771 msecs
[ 6939.525420] PM: late suspend of devices complete after 0.218 msecs
[ 6939.530025] pcieport 0000:00:15.1: wake-up capability enabled by ACPI
[ 6939.541292] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 6939.551992] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 6939.552021] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 6939.562966] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 6939.563016] xhci_hcd 0000:00:10.1: wake-up capability enabled by ACPI
[ 6939.573977] xhci_hcd 0000:00:10.0: wake-up capability enabled by ACPI
[ 6939.584998] PM: noirq suspend of devices complete after 59.679 msecs
[ 6939.585090] ACPI: Preparing to enter system sleep state S3
[ 6939.620600] PM: Saving platform NVS memory
[ 6939.624602] Disabling non-boot CPUs ...
[ 6939.626397] smpboot: CPU 1 is now offline
[ 6939.628666] smpboot: CPU 2 is now offline
[ 6939.630608] smpboot: CPU 3 is now offline
[ 6939.631399] ACPI: Low-level resume complete
[ 6939.631461] PM: Restoring platform NVS memory
[ 6939.632209] LVT offset 0 assigned for vector 0xf9
[ 6939.641250] microcode: CPU0: new patch_level=0x06001119
[ 6939.641306] Enabling non-boot CPUs ...
[ 6939.642605] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 6939.653684] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 6939.653686] perf: IBS APIC setup failed on cpu #1
[ 6939.656151] CPU1 is up
[ 6939.656316] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 6939.667405] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 6939.667406] perf: IBS APIC setup failed on cpu #2
[ 6939.678756] microcode: CPU2: new patch_level=0x06001119
[ 6939.678839] CPU2 is up
[ 6939.679007] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 6939.690080] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 6939.690081] perf: IBS APIC setup failed on cpu #3
[ 6939.692499] CPU3 is up
[ 6939.694366] ACPI: Waking up from system sleep state S3
[ 6939.990421] xhci_hcd 0000:00:10.0: wake-up capability disabled by ACPI
[ 6940.001401] xhci_hcd 0000:00:10.1: wake-up capability disabled by ACPI
[ 6940.001462] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 6940.012345] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 6940.012372] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 6940.023330] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 6940.058397] PM: noirq resume of devices complete after 90.099 msecs
[ 6940.058620] PM: early resume of devices complete after 0.156 msecs
[ 6940.058883] snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
[ 6940.060240] pcieport 0000:00:15.1: wake-up capability disabled by ACPI
[ 6940.064615] <6>[fglrx] Power up the ASIC
[ 6940.064626] <6>[fglrx] Preparing resume fglrx in kernel.
[ 6940.072442] <6>[fglrx] Resuming fglrx in kernel completed.
[ 6940.072497] <6>[fglrx] IRQ 54 Enabled
[ 6940.134778] <6>[fglrx] Power up the ASIC
[ 6940.134849] <6>[fglrx] Preparing resume fglrx in kernel.
[ 6940.144434] <6>[fglrx] Resuming fglrx in kernel completed.
[ 6940.144486] <6>[fglrx] IRQ 55 Enabled
[ 6940.322783] usb 1-3: reset high-speed USB device number 3 using ehci_hcd
[ 6940.363712] ata2: SATA link down (SStatus 0 SControl 310)
[ 6940.402797] i8042 kbd 00:07: wake-up capability disabled by ACPI
[ 6942.198467] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6942.202337] ata1.00: configured for UDMA/100
[ 6942.213571] sd 0:0:0:0: [sda] Starting disk
[ 6942.237465] PM: resume of devices complete after 2182.700 msecs
[ 6942.237779] PM: Finishing wakeup.
[ 6942.237780] Restarting tasks ... done.
[ 6942.249233] video LNXVIDEO:00: Restoring backlight state
[ 6942.250634] video LNXVIDEO:01: Restoring backlight state
[ 6942.577161] usbcore: deregistering interface driver ndiswrapper
[ 6942.581283] ndiswrapper version 1.58rc1 loaded (smp=yes, preempt=yes)
[ 6942.590253] usbcore: registered new interface driver ndiswrapper
[ 6942.615968] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6942.804132] r8169 0000:05:00.0 eth0: link down
[ 6942.804307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6948.636591] wlan0: authenticate with 90:f6:52:bc:30:58
[ 6948.640012] wlan0: send auth to 90:f6:52:bc:30:58 (try 1/3)
[ 6948.641906] wlan0: authenticated
[ 6948.642203] rt2800pci 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 6948.642911] wlan0: associate with 90:f6:52:bc:30:58 (try 1/3)
[ 6948.645259] wlan0: RX AssocResp from 90:f6:52:bc:30:58 (capab=0x431 status=0 aid=1)
[ 6948.645552] wlan0: associated
[ 6948.645605] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6948.645804] cfg80211: Calling CRDA for country: RU
[ 6948.650241] cfg80211: Regulatory domain changed to country: RU
[ 6948.650245] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6948.650247] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 6948.650249] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 6950.263985] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 6950.331631] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 6950.348943] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
[ 6950.581568] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 6950.832329] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[ 6981.216413] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 7013.160688] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 7077.048803] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 7204.848961] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:6a94:23ff:fe1f:aa83 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44

Lupo Alberto · 01.04.2013 00:13:42

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

+ Вроде бы определяется...

danilec⇓ пишет:

[ 4768.336117] usb 7-1: USB disconnect, device number 2
[ 4769.738734] usb 7-1: new high-speed USB device number 3 using xhci_hcd
[ 4769.757726] usb 7-1: New USB device found, idVendor=0718, idProduct=070a
[ 4769.757734] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4769.757739] usb 7-1: Product: TF10
[ 4769.757742] usb 7-1: Manufacturer: TDK LoR
[ 4769.757746] usb 7-1: SerialNumber: 0707274196D75F22
[ 4769.760056] scsi3 : usb-storage 7-1:1.0
[ 4770.842340] scsi 3:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4770.842746] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 4772.221944] sd 3:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4772.222229] sd 3:0:0:0: [sdb] Write Protect is off
[ 4772.222241] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4772.222631] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.222640] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.224936] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.224942] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.245533] sdb: sdb1
[ 4772.246872] sd 3:0:0:0: [sdb] No Caching mode page present
[ 4772.246879] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4772.246885] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 4773.468301] usb 7-1: USB disconnect, device number 3
[ 4775.720077] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[ 4775.739103] usb 5-2: New USB device found, idVendor=0718, idProduct=070a
[ 4775.739111] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4775.739116] usb 5-2: Product: TF10
[ 4775.739120] usb 5-2: Manufacturer: TDK LoR
[ 4775.739123] usb 5-2: SerialNumber: 0707274196D75F22
[ 4775.741519] scsi4 : usb-storage 5-2:1.0
[ 4776.823643] scsi 4:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 4
[ 4776.824832] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4778.203299] sd 4:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB)
[ 4778.203480] sd 4:0:0:0: [sdb] Write Protect is off
[ 4778.203485] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4778.203655] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.203662] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.205456] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.205460] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.225847] sdb: sdb1
[ 4778.227218] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4778.227226] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4778.227232] sd 4:0:0:0: [sdb] Attached SCSI removable disk

Карта 8 Гб?

Был, был и весь вышел...

Lupo Alberto · 01.04.2013 00:15:38

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

В порядке предварительного эксперимента (от root):

mkdir -p /mnt/sdcard
mount /dev/sdb1 /mnt/sdcard

Был, был и весь вышел...

Lupo Alberto · 01.04.2013 00:17:57

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

Покажите также (от обычного пользователя):

ls -l /dev/sdb1

id

Был, был и весь вышел...

Lupo Alberto · 01.04.2013 00:24:27

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

...хотя, если мне не изменяет память, устройство SD-карты должно выглядеть иначе, чем /dev/sdb

Был, был и весь вышел...

danilec · 01.04.2013 00:24:30

danilec
Новичок
Неактивен

Зарегистрирован: 16.12.2012
Сообщений: 27
Репутация : [ 0 | 0 ]

Lupo Alberto⇓ пишет:

Карта 8 Гб?

Нет, на 16 Гб
То, что выводится, смахивает на другую флешку ( юсбишную) - по объёму и производителю)

Lupo Alberto · 01.04.2013 00:27:06

Lupo Alberto
Пользователь
Неактивен

Откуда: Беларусь, Гомель
Зарегистрирован: 04.07.2010
Сообщений: 11,183
Репутация : [ 571 | 8 ]

Покажите (от root):

lspci -k

lspci -n

Был, был и весь вышел...

danilec · 01.04.2013 00:27:32

danilec
Новичок
Неактивен

Зарегистрирован: 16.12.2012
Сообщений: 27
Репутация : [ 0 | 0 ]

Lupo Alberto⇓ пишет:

ls -l /dev/sdb1

ls: невозможно получить доступ к /dev/sdb1: Нет такого файла или каталога

Lupo Alberto⇓ пишет:

id

uid=1000(igor) gid=100(users) группы=100(users)

danilec · 01.04.2013 00:30:05

danilec
Новичок
Неактивен

Зарегистрирован: 16.12.2012
Сообщений: 27
Репутация : [ 0 | 0 ]

Lupo Alberto⇓ пишет:

lspci -k

+ открыть спойлер

00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
Subsystem: Hewlett-Packard Company Device 184a
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Trinity [Radeon HD 7640G]
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: fglrx_pci
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Trinity HDMI Audio Controller
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: snd_hda_intel
00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port
Kernel driver in use: pcieport
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port
Kernel driver in use: pcieport
00:10.0 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: xhci_hcd
00:10.1 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: xhci_hcd
00:11.0 SATA controller: Advanced Micro Devices [AMD] FCH SATA Controller [AHCI mode]
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ohci_hcd
00:12.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ehci_hcd
00:13.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ohci_hcd
00:13.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: ehci_hcd
00:14.0 SMBus: Advanced Micro Devices [AMD] FCH SMBus Controller (rev 14)
Subsystem: Hewlett-Packard Company Device 184a
00:14.2 Audio device: Advanced Micro Devices [AMD] FCH Azalia Controller (rev 01)
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices [AMD] FCH LPC Bridge (rev 11)
Subsystem: Hewlett-Packard Company Device 184a
00:14.4 PCI bridge: Advanced Micro Devices [AMD] FCH PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI to PCI bridge (PCIE port 0)
Kernel driver in use: pcieport
00:15.1 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI to PCI bridge (PCIE port 1)
Kernel driver in use: pcieport
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 3
Kernel driver in use: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series]
Subsystem: Hewlett-Packard Company Device 184a
Kernel driver in use: fglrx_pci
02:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
Subsystem: Hewlett-Packard Company Device 18ec
Kernel driver in use: rt2800pci
02:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
Subsystem: Hewlett-Packard Company Device 18ec
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company Device 184a
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller
Kernel driver in use: r8169

Lupo Alberto⇓ пишет:

lspci -n

+ открыть спойлер

0:00.0 0600: 1022:1410
00:01.0 0300: 1002:9903
00:01.1 0403: 1002:9902
00:02.0 0604: 1022:1412
00:04.0 0604: 1022:1414
00:10.0 0c03: 1022:7812 (rev 03)
00:10.1 0c03: 1022:7812 (rev 03)
00:11.0 0106: 1022:7804
00:12.0 0c03: 1022:7807 (rev 11)
00:12.2 0c03: 1022:7808 (rev 11)
00:13.0 0c03: 1022:7807 (rev 11)
00:13.2 0c03: 1022:7808 (rev 11)
00:14.0 0c05: 1022:780b (rev 14)
00:14.2 0403: 1022:780d (rev 01)
00:14.3 0601: 1022:780e (rev 11)
00:14.4 0604: 1022:780f (rev 40)
00:15.0 0604: 1022:43a0
00:15.1 0604: 1022:43a1
00:18.0 0600: 1022:1400
00:18.1 0600: 1022:1401
00:18.2 0600: 1022:1402
00:18.3 0600: 1022:1403
00:18.4 0600: 1022:1404
00:18.5 0600: 1022:1405
01:00.0 0300: 1002:6840
02:00.0 0280: 1814:3290
02:00.1 0d11: 1814:3298
04:00.0 ff00: 10ec:5229 (rev 01)
05:00.0 0200: 10ec:8136 (rev 05)

yars · 01.04.2013 00:31:03

yars
Slacker
Неактивен

Откуда: Тамбовская область
Зарегистрирован: 23.03.2012
Сообщений: 10,043
Репутация : [ 309 | 1 ]

Хм, что-то я не уловил. Давайте так: дайте от рута команду

udevadm monitor

и подключите проблемную флешку (карту).

Истинный hotplug - это обычная электрическая розетка: воткнул - работает, и никаких драйверов.
Arch Linux/Xfce/Xiaomi Mi Notebook Pro 15.6 | Slackware64-current/Xfce/Lenovo G580

danilec · 01.04.2013 00:36:06

danilec
Новичок
Неактивен

Зарегистрирован: 16.12.2012
Сообщений: 27
Репутация : [ 0 | 0 ]

yars⇓ пишет:

udevadm monitor

monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

После подключения SD-карты ноль эмоций...
Хотя если вставить обычную флешку (юсб) то что-то начинает писать.

yars · 01.04.2013 00:49:59

yars
Slacker
Неактивен

Откуда: Тамбовская область
Зарегистрирован: 23.03.2012
Сообщений: 10,043
Репутация : [ 309 | 1 ]

Через какой кард-ридер подключаете? У меня внешний китайский CyberBrand Retail CR 455, разве что CompactFlash я с ним не проверял, но SD/microSD определяются на ура.

Истинный hotplug - это обычная электрическая розетка: воткнул - работает, и никаких драйверов.
Arch Linux/Xfce/Xiaomi Mi Notebook Pro 15.6 | Slackware64-current/Xfce/Lenovo G580

danilec · 01.04.2013 01:21:57

danilec
Новичок
Неактивен

Зарегистрирован: 16.12.2012
Сообщений: 27
Репутация : [ 0 | 0 ]

Через встроенный, название не знаю где посмотреть...

aliaksei1818 · 01.04.2013 03:35:05

aliaksei1818
Пользователь
Неактивен

Откуда: Беларусь
Зарегистрирован: 26.02.2011
Сообщений: 958
Репутация : [ 65 | 0 ]

danilec пишет:

04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company Device 184a

Неужели гугл бесполезен?
http://www.realtek.com.tw/DOWNLOADS/dow … Down=false

zypper ar -f http://download.opensuse.org/repositories/home:/sdrahn:/kmp/openSUSE_12.3/ rts5229
zypper mr -p 110 rts5229
zypper in -f rts5229-kmp-`uname -r|cut -f3 -d"-"`
/sbin/modprobe rts5229

+ yars

yars · 01.04.2013 07:45:58

yars
Slacker
Неактивен

Откуда: Тамбовская область
Зарегистрирован: 23.03.2012
Сообщений: 10,043
Репутация : [ 309 | 1 ]

aliaksei1818 пишет:

Неужели гугл бесполезен?

Вот что ~~крест животворящий~~ свежая голова делает!

Истинный hotplug - это обычная электрическая розетка: воткнул - работает, и никаких драйверов.
Arch Linux/Xfce/Xiaomi Mi Notebook Pro 15.6 | Slackware64-current/Xfce/Lenovo G580

Уважаемые посетители!

Ноут на Опенсусе (12.3) не видит SD-карту.

Сообщений 18

1 Тема от danilec 31.03.2013 21:08:12

2 Ответ от yars 31.03.2013 21:35:57

3 Ответ от danilec 01.04.2013 00:07:32

4 Ответ от danilec 01.04.2013 00:09:07

5 Ответ от Lupo Alberto 01.04.2013 00:13:42

6 Ответ от Lupo Alberto 01.04.2013 00:15:38

7 Ответ от Lupo Alberto 01.04.2013 00:17:57

8 Ответ от Lupo Alberto 01.04.2013 00:24:27

9 Ответ от danilec 01.04.2013 00:24:30

10 Ответ от Lupo Alberto 01.04.2013 00:27:06

11 Ответ от danilec 01.04.2013 00:27:32

12 Ответ от danilec 01.04.2013 00:30:05 (01.04.2013 00:31:16 отредактировано danilec)

13 Ответ от yars 01.04.2013 00:31:03

14 Ответ от danilec 01.04.2013 00:36:06

15 Ответ от yars 01.04.2013 00:49:59

16 Ответ от danilec 01.04.2013 01:21:57

17 Ответ от aliaksei1818 01.04.2013 03:35:05

18 Ответ от yars 01.04.2013 07:45:58

Сообщений 18

Просматривают тему: 1 гость, 0 пользователей