1 Тема от igael

  • igael
  • Посетитель
  • Неактивен
  • Зарегистрирован: 05.04.2013
  • Сообщений: 7
  • Репутация : [ 1 | 0 ]

Суть вопроса такая - имеется несколько машин под "янукс" ( базируется на red hat enterprise linux), требуется посмотреть историю подключения внешних USB устройств за  некий прошедший период  времени (контроль пользователя за компом). Как это можно сделать? Или  в какую строну копать, подскажите пожалуйста.

2 Ответ от afanasev.p

  • afanasev.p
  • Пользователь
  • Неактивен
  • Зарегистрирован: 02.10.2012
  • Сообщений: 126
  • Репутация : [ 13 | 0 ]

Копать в сторону /var/log/messages

И баба с воза, и волки сыты...

3 Ответ от jashaw5

  • jashaw5
  • jashaw5
  • Пользователь
  • Неактивен
  • Откуда: Мариуполь
  • Зарегистрирован: 19.12.2010
  • Сообщений: 819
  • Репутация : [ 17 | 1 ]
igael⇓ пишет:

"янукс"

А что такое янукс? Ни Google ни Википедия не находят.

Segui il tuo corso, e lascia dir le genti

4 Ответ от igael

  • igael
  • Посетитель
  • Неактивен
  • Зарегистрирован: 05.04.2013
  • Сообщений: 7
  • Репутация : [ 1 | 0 ]

Проблема усложняется тем, что регулярно это будет делать человек, далекий от компьютеров . В идеале требуется аналог виндового usbdeview , чтобы "оно все делало само" ab.

5 Ответ от igael

  • igael
  • Посетитель
  • Неактивен
  • Зарегистрирован: 05.04.2013
  • Сообщений: 7
  • Репутация : [ 1 | 0 ]
jashaw5 пишет:
igael⇓ пишет:

"янукс"

А что такое янукс? Ни Google ни Википедия не находят.

yanux.ru

+ jashaw5

6 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

Напиши скрипт. Например grep usb /var/log/messages.
Распарсь вывод.

Сайт Vascom

7 Ответ от igael

  • igael
  • Посетитель
  • Неактивен
  • Зарегистрирован: 05.04.2013
  • Сообщений: 7
  • Репутация : [ 1 | 0 ]

Не пишет оно в /var/log/messages нужное .
Надо получить информацию вида
дата - время - внешнее usb-устройство (флешка, мобила и т.д) с названием.
по cat /proc/bus/usb/devices подключеную в данный момент флешку видно, но надо то хотя бы за сутки отчет.

8 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

Да всё пишет там. Щас покажу.

Сайт Vascom

9 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

Вот что выдаёт grep kernel | /var/log/messages

Apr  5 09:42:49 mars kernel: [76039.704062] usb 2-1: USB disconnect, device number 2
Apr  5 09:42:53 mars kernel: [76043.738031] usb 2-1: new full-speed USB device number 3 using uhci_hcd
Apr  5 09:42:53 mars kernel: [76043.916061] usb 2-1: New USB device found, idVendor=09fb, idProduct=6001
Apr  5 09:42:53 mars kernel: [76043.916070] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr  5 09:42:53 mars kernel: [76043.916074] usb 2-1: Product: USB-Blaster
Apr  5 09:42:53 mars kernel: [76043.916078] usb 2-1: Manufacturer: Altera
Apr  5 09:42:53 mars kernel: [76043.916083] usb 2-1: SerialNumber: 91d28408
Apr  5 10:17:37 mars kernel: [78128.214422] nf_conntrack: falling back to vmalloc.
Apr  5 10:17:37 mars kernel: [78128.217427] nf_conntrack: falling back to vmalloc.
Apr  5 11:18:55 mars kernel: [81805.378026] usb 1-7: new high-speed USB device number 7 using ehci-pci
Apr  5 11:18:55 mars kernel: [81805.493001] usb 1-7: New USB device found, idVendor=0bb4, idProduct=0ff9
Apr  5 11:18:55 mars kernel: [81805.493039] usb 1-7: New USB device strings: Mfr=2, Product=3, SerialNumber=4
Apr  5 11:18:55 mars kernel: [81805.493046] usb 1-7: Product: Android Phone
Apr  5 11:18:55 mars kernel: [81805.493051] usb 1-7: Manufacturer: HTC
Apr  5 11:18:55 mars kernel: [81805.493055] usb 1-7: SerialNumber: HT13JTD01604
Apr  5 11:18:55 mars kernel: [81805.494434] scsi9 : usb-storage 1-7:1.0
Apr  5 11:18:56 mars kernel: [81806.496795] scsi 9:0:0:0: Direct-Access     HTC      Android Phone    0000 PQ: 0 ANSI: 2
Apr  5 11:18:56 mars kernel: [81806.501710] sd 9:0:0:0: Attached scsi generic sg7 type 0
Apr  5 11:18:56 mars kernel: [81806.506067] sd 9:0:0:0: [sdg] Attached SCSI removable disk
Apr  5 11:19:25 mars kernel: [81835.495098] sd 9:0:0:0: [sdg] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
Apr  5 11:19:25 mars kernel: [81835.503861]  sdg: sdg1

Всё же видно: сперва из порта 2-1 было извлечено устройство и тут же вставлено, это устройство Product: USB-Blaster Manufacturer: Altera. Далее в 11:18 в порт 1-7 было вставлено ещё одно устройство, это Product: Android Phone Manufacturer: HTC, оно было распознано как устройство хранения и создан блочный файл /dev/sdg1.

Всё же есть.
Конечно при грепании по kernel там ещё много лишних сообщений будет, но всё это можно легко распарсить, было бы желание.

Сайт Vascom

10 Ответ от afanasev.p

  • afanasev.p
  • Пользователь
  • Неактивен
  • Зарегистрирован: 02.10.2012
  • Сообщений: 126
  • Репутация : [ 13 | 0 ]

Если хочется с блэкджеком и всем остальным - udev-правила + скрипты для отображения инфы пользователю/записи в логи/etc.

И баба с воза, и волки сыты...

11 Ответ от igael

  • igael
  • Посетитель
  • Неактивен
  • Зарегистрирован: 05.04.2013
  • Сообщений: 7
  • Репутация : [ 1 | 0 ]

Имеется такой вот syslog.conf

# Log all kernel messages to the console.
# Logging much else clutters up the screen.
#kern.*                            /dev/console

# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none        /var/log/messages

# The authpriv file has restricted access.
authpriv.*                        /var/log/secure

# Log all the mail messages in one place.
mail.*                            -/var/log/maillog


# Log cron stuff
cron.*                            /var/log/cron

# Everybody gets emergency messages
*.emerg                            *

# Save news errors of level crit and higher in a special file.
uucp,news.crit                        /var/log/spooler

# Save boot messages also to boot.log
local7.*                        /var/log/boot.log

в /var/log/ есть файлы messages ( несколько строк от самбы) и messages.1 ( собственно логи)

Apr  5 08:53:34 PU-1 syslogd 1.4.1: restart.
Apr  5 08:53:34 PU-1 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr  5 08:53:34 PU-1 kernel: Linux version 2.6.23.17-82.yanux3 (root@hm.luch.podolsk.ru) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Mon Apr 14 11:37:36 MSD 2008
Apr  5 08:53:34 PU-1 kernel: BIOS-provided physical RAM map:
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 0000000000100000 - 000000007db90000 (usable)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 000000007db90000 - 000000007e141000 (reserved)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 000000007e141000 - 000000007e396000 (ACPI NVS)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 000000007e396000 - 000000007e3a2000 (ACPI data)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 000000007e3a2000 - 000000007e3c1000 (ACPI NVS)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 000000007e3c1000 - 000000007e3c6000 (ACPI data)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 000000007e3c6000 - 000000007e409000 (ACPI NVS)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 000000007e409000 - 000000007e800000 (usable)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
Apr  5 08:53:34 PU-1 kernel:  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Apr  5 08:53:35 PU-1 kernel:  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
Apr  5 08:53:35 PU-1 kernel:  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Apr  5 08:53:35 PU-1 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Apr  5 08:53:35 PU-1 kernel:  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Apr  5 08:53:35 PU-1 kernel: 1128MB HIGHMEM available.
Apr  5 08:53:35 PU-1 kernel: 896MB LOWMEM available.
Apr  5 08:53:35 PU-1 kernel: found SMP MP-table at 000fccb0
Apr  5 08:53:35 PU-1 kernel: Using x86 segment limits to approximate NX protection
Apr  5 08:53:35 PU-1 kernel: Zone PFN ranges:
Apr  5 08:53:35 PU-1 kernel:   DMA             0 ->     4096
Apr  5 08:53:35 PU-1 rpc.statd[2023]: Version 1.1.0 Starting
Apr  5 08:53:35 PU-1 kernel:   Normal       4096 ->   229376
Apr  5 08:53:35 PU-1 kernel:   HighMem    229376 ->   518144
Apr  5 08:53:35 PU-1 kernel: Movable zone start PFN for each node
Apr  5 08:53:35 PU-1 kernel: early_node_map[1] active PFN ranges
Apr  5 08:53:35 PU-1 kernel:     0:        0 ->   518144
Apr  5 08:53:35 PU-1 audispd: starting audispd
Apr  5 08:53:35 PU-1 kernel: DMI 2.6 present.
Apr  5 08:53:35 PU-1 kernel: Using APIC driver default
Apr  5 08:53:35 PU-1 kernel: ACPI: RSDP 000F0450, 0024 (r2 ALASKA)
Apr  5 08:53:35 PU-1 kernel: ACPI: XSDT 7E396070, 0064 (r1 ALASKA    A M I  1072009 AMI     10013)
Apr  5 08:53:35 PU-1 kernel: ACPI: FACP 7E3A04B8, 00F4 (r4 ALASKA    A M I  1072009 AMI     10013)
Apr  5 08:53:35 PU-1 kernel: ACPI: DSDT 7E396168, A349 (r2 ALASKA    A M I       15 INTL 20051117)
Apr  5 08:53:35 PU-1 kernel: ACPI: FACS 7E3BFF80, 0040
Apr  5 08:53:35 PU-1 kernel: ACPI: APIC 7E3A05B0, 0062 (r3 ALASKA    A M I  1072009 AMI     10013)
Apr  5 08:53:35 PU-1 kernel: ACPI: MCFG 7E3A0618, 003C (r1 ALASKA    A M I  1072009 MSFT       97)
Apr  5 08:53:35 PU-1 kernel: ACPI: HPET 7E3A0658, 0038 (r1 ALASKA    A M I  1072009 AMI.        5)
Apr  5 08:53:35 PU-1 kernel: ACPI: SSDT 7E3A0690, 036D (r1 SataRe SataTabl     1000 INTL 20091112)
Apr  5 08:53:35 PU-1 kernel: ACPI: SSDT 7E3A0A00, 09AA (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
Apr  5 08:53:35 PU-1 kernel: ACPI: SSDT 7E3A13B0, 0A92 (r1  PmRef    CpuPm     3000 INTL 20051117)
Apr  5 08:53:35 PU-1 kernel: ACPI: BGRT 7E3A1E48, 0038 (r0 ALASKA    A M I  1072009 AMI     10013)
Apr  5 08:53:35 PU-1 kernel: ACPI: PM-Timer IO Port: 0x408
Apr  5 08:53:35 PU-1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Apr  5 08:53:35 PU-1 kernel: Processor #0 6:10 APIC version 21
Apr  5 08:53:35 PU-1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Apr  5 08:53:35 PU-1 kernel: Processor #2 6:10 APIC version 21
Apr  5 08:53:35 PU-1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Apr  5 08:53:35 PU-1 kernel: ACPI: Skipping IOAPIC probe due to 'noapic' option.
Apr  5 08:53:35 PU-1 kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
Apr  5 08:53:35 PU-1 kernel: Using ACPI for processor (LAPIC) configuration information
Apr  5 08:53:35 PU-1 kernel: Intel MultiProcessor Specification v1.4
Apr  5 08:53:35 PU-1 kernel:     Virtual Wire compatibility mode.
Apr  5 08:53:35 PU-1 kernel: OEM ID: A M I Product ID: ALASKA APIC at: 0xFEE00000
Apr  5 08:53:35 PU-1 kernel: I/O APIC #2 Version 32 at 0xFEC00000.
Apr  5 08:53:35 PU-1 kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Apr  5 08:53:35 PU-1 kernel: Processors: 2
Apr  5 08:53:35 PU-1 kernel: Allocating PCI resources starting at 80000000 (gap: 7e800000:79800000)
Apr  5 08:53:35 PU-1 kernel: swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
Apr  5 08:53:35 PU-1 kernel: swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
Apr  5 08:53:35 PU-1 kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
Apr  5 08:53:35 PU-1 kernel: swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Apr  5 08:53:35 PU-1 kernel: Built 1 zonelists in Zone order.  Total pages: 514096
Apr  5 08:53:35 PU-1 kernel: Kernel command line: ro root=LABEL=/ rhgb quiet noapic irqpoll
Apr  5 08:53:35 PU-1 kernel: Misrouted IRQ fixup and polling support enabled
Apr  5 08:53:35 PU-1 kernel: This may significantly impact system performance
Apr  5 08:53:35 PU-1 kernel: Enabling fast FPU save and restore... done.
Apr  5 08:53:35 PU-1 kernel: Enabling unmasked SIMD FPU exception support... done.
Apr  5 08:53:35 PU-1 kernel: Initializing CPU#0
Apr  5 08:53:35 PU-1 kernel: CPU 0 irqstacks, hard=c07a6000 soft=c0786000
Apr  5 08:53:35 PU-1 kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Apr  5 08:53:35 PU-1 kernel: Detected 3193.072 MHz processor.
Apr  5 08:53:35 PU-1 kernel: Console: colour VGA+ 80x25
Apr  5 08:53:35 PU-1 kernel: console [tty0] enabled
Apr  5 08:53:35 PU-1 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Apr  5 08:53:35 PU-1 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr  5 08:53:35 PU-1 kernel: Memory: 2038288k/2072576k available (2178k kernel code, 24356k reserved, 1114k data, 280k init, 1146396k highmem)
Apr  5 08:53:35 PU-1 kernel: virtual kernel memory layout:
Apr  5 08:53:35 PU-1 kernel:     fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
Apr  5 08:53:35 PU-1 kernel:     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Apr  5 08:53:35 PU-1 kernel:     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Apr  5 08:53:35 PU-1 kernel:     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Apr  5 08:53:35 PU-1 kernel:       .init : 0xc073d000 - 0xc0783000   ( 280 kB)
Apr  5 08:53:35 PU-1 kernel:       .data : 0xc0620a3d - 0xc0737544   (1114 kB)
Apr  5 08:53:35 PU-1 kernel:       .text : 0xc0400000 - 0xc0620a3d   (2178 kB)
Apr  5 08:53:35 PU-1 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Apr  5 08:53:35 PU-1 kernel: SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Apr  5 08:53:35 PU-1 kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Apr  5 08:53:35 PU-1 kernel: hpet0: 8 64-bit timers, 14318180 Hz
Apr  5 08:53:35 PU-1 kernel: Calibrating delay using timer specific routine.. 6395.02 BogoMIPS (lpj=3197511)
Apr  5 08:53:35 PU-1 kernel: Security Framework v1.0.0 initialized
Apr  5 08:53:35 PU-1 kernel: SELinux:  Initializing.
Apr  5 08:53:35 PU-1 kernel: selinux_register_security:  Registering secondary module capability
Apr  5 08:53:35 PU-1 kernel: Capability LSM initialized as secondary
Apr  5 08:53:35 PU-1 kernel: Mount-cache hash table entries: 512
Apr  5 08:53:35 PU-1 kernel: monitor/mwait feature present.
Apr  5 08:53:35 PU-1 kernel: using mwait in idle threads.
Apr  5 08:53:35 PU-1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr  5 08:53:35 PU-1 kernel: CPU: L2 cache: 256K
Apr  5 08:53:35 PU-1 kernel: CPU: L3 cache: 3072K
Apr  5 08:53:35 PU-1 kernel: CPU: Physical Processor ID: 0
Apr  5 08:53:35 PU-1 kernel: CPU: Processor Core ID: 0
Apr  5 08:53:35 PU-1 kernel: Intel machine check architecture supported.
Apr  5 08:53:35 PU-1 kernel: Intel machine check reporting enabled on CPU#0.
Apr  5 08:53:35 PU-1 kernel: Compat vDSO mapped to ffffe000.
Apr  5 08:53:35 PU-1 kernel: Checking 'hlt' instruction... OK.
Apr  5 08:53:35 PU-1 kernel: SMP alternatives: switching to UP code
Apr  5 08:53:35 PU-1 kernel: ACPI: Core revision 20070126
Apr  5 08:53:35 PU-1 kernel: ACPI: setting ELCR to 0200 (from 0c28)
Apr  5 08:53:35 PU-1 kernel: CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz stepping 07
Apr  5 08:53:35 PU-1 kernel: SMP alternatives: switching to SMP code
Apr  5 08:53:35 PU-1 kernel: Booting processor 1/2 eip 3000
Apr  5 08:53:35 PU-1 kernel: CPU 1 irqstacks, hard=c07a7000 soft=c0787000
Apr  5 08:53:35 PU-1 kernel: Initializing CPU#1
Apr  5 08:53:35 PU-1 kernel: Calibrating delay using timer specific routine.. 6385.95 BogoMIPS (lpj=3192976)
Apr  5 08:53:35 PU-1 kernel: monitor/mwait feature present.
Apr  5 08:53:35 PU-1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr  5 08:53:35 PU-1 kernel: CPU: L2 cache: 256K
Apr  5 08:53:35 PU-1 kernel: CPU: L3 cache: 3072K
Apr  5 08:53:35 PU-1 kernel: CPU: Physical Processor ID: 0
Apr  5 08:53:35 PU-1 kernel: CPU: Processor Core ID: 1
Apr  5 08:53:35 PU-1 kernel: Intel machine check architecture supported.
Apr  5 08:53:35 PU-1 kernel: Intel machine check reporting enabled on CPU#1.
Apr  5 08:53:35 PU-1 kernel: CPU1: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz stepping 07
Apr  5 08:53:35 PU-1 kernel: Total of 2 processors activated (12780.97 BogoMIPS).
Apr  5 08:53:35 PU-1 kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Apr  5 08:53:35 PU-1 kernel: Brought up 2 CPUs
Apr  5 08:53:35 PU-1 kernel: Booting paravirtualized kernel on bare hardware
Apr  5 08:53:35 PU-1 kernel: Time:  8:53:07  Date: 04/05/13
Apr  5 08:53:35 PU-1 kernel: NET: Registered protocol family 16
Apr  5 08:53:35 PU-1 kernel: No dock devices found.
Apr  5 08:53:35 PU-1 kernel: ACPI: bus type pci registered
Apr  5 08:53:35 PU-1 kernel: PCI: Using configuration type 1
Apr  5 08:53:35 PU-1 kernel: Setting up standard PCI resources
Apr  5 08:53:35 PU-1 kernel: ACPI Error (psargs-0355): [RAMB] Namespace lookup failure, AE_NOT_FOUND
Apr  5 08:53:35 PU-1 kernel: ACPI Exception (nsinit-0311): AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) [20070126]
Apr  5 08:53:35 PU-1 kernel: ACPI: Interpreter enabled
Apr  5 08:53:35 PU-1 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Apr  5 08:53:35 PU-1 kernel: ACPI: Using PIC for interrupt routing
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr  5 08:53:35 PU-1 kernel: PCI: Transparent bridge - 0000:00:1c.4
Apr  5 08:53:35 PU-1 kernel: PCI: Transparent bridge - 0000:04:00.0
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
Apr  5 08:53:35 PU-1 kernel: ACPI: Power Resource [FN00] (off)
Apr  5 08:53:35 PU-1 kernel: ACPI: Power Resource [FN01] (off)
Apr  5 08:53:35 PU-1 kernel: ACPI: Power Resource [FN02] (off)
Apr  5 08:53:35 PU-1 kernel: ACPI: Power Resource [FN03] (off)
Apr  5 08:53:35 PU-1 kernel: ACPI: Power Resource [FN04] (off)
Apr  5 08:53:35 PU-1 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Apr  5 08:53:35 PU-1 kernel: pnp: PnP ACPI init
Apr  5 08:53:35 PU-1 kernel: ACPI: bus type pnp registered
Apr  5 08:53:35 PU-1 kernel: pnp: PnP ACPI: found 13 devices
Apr  5 08:53:35 PU-1 kernel: ACPI: ACPI bus type pnp unregistered
Apr  5 08:53:35 PU-1 kernel: usbcore: registered new interface driver usbfs
Apr  5 08:53:35 PU-1 kernel: usbcore: registered new interface driver hub
Apr  5 08:53:35 PU-1 kernel: usbcore: registered new device driver usb
Apr  5 08:53:35 PU-1 kernel: PCI: Using ACPI for IRQ routing
Apr  5 08:53:35 PU-1 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Apr  5 08:53:35 PU-1 kernel: NetLabel: Initializing
Apr  5 08:53:35 PU-1 kernel: NetLabel:  domain hash size = 128
Apr  5 08:53:35 PU-1 kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Apr  5 08:53:35 PU-1 kernel: NetLabel:  unlabeled traffic allowed by default
Apr  5 08:53:35 PU-1 kernel: Time: tsc clocksource has been installed.
Apr  5 08:53:35 PU-1 kernel: pnp: 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
Apr  5 08:53:35 PU-1 kernel: pnp: 00:07: ioport range 0x454-0x457 has been reserved
Apr  5 08:53:35 PU-1 kernel: pnp: 00:08: ioport range 0x290-0x29f has been reserved
Apr  5 08:53:35 PU-1 kernel: pnp: 00:0c: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Apr  5 08:53:35 PU-1 kernel: pnp: 00:0c: iomem range 0xfed10000-0xfed17fff has been reserved
Apr  5 08:53:35 PU-1 kernel: pnp: 00:0c: iomem range 0xfed18000-0xfed18fff has been reserved
Apr  5 08:53:35 PU-1 kernel: pnp: 00:0c: iomem range 0xfed19000-0xfed19fff has been reserved
Apr  5 08:53:35 PU-1 kernel: PCI: Bridge: 0000:00:01.0
Apr  5 08:53:35 PU-1 kernel:   IO window: e000-efff
Apr  5 08:53:35 PU-1 kernel:   MEM window: f6000000-f70fffff
Apr  5 08:53:35 PU-1 kernel:   PREFETCH window: e0000000-f1ffffff
Apr  5 08:53:35 PU-1 kernel: PCI: Bridge: 0000:00:1c.0
Apr  5 08:53:35 PU-1 kernel:   IO window: disabled.
Apr  5 08:53:35 PU-1 kernel:   MEM window: disabled.
Apr  5 08:53:35 PU-1 kernel:   PREFETCH window: disabled.
Apr  5 08:53:35 PU-1 kernel: PCI: Bridge: 0000:00:1c.2
Apr  5 08:53:35 PU-1 kernel:   IO window: d000-dfff
Apr  5 08:53:35 PU-1 kernel:   MEM window: disabled.
Apr  5 08:53:35 PU-1 kernel:   PREFETCH window: f2100000-f21fffff
Apr  5 08:53:35 PU-1 kernel: PCI: Bridge: 0000:04:00.0
Apr  5 08:53:35 PU-1 kernel:   IO window: c000-cfff
Apr  5 08:53:35 PU-1 kernel:   MEM window: f7100000-f71fffff
Apr  5 08:53:35 PU-1 kernel:   PREFETCH window: disabled.
Apr  5 08:53:35 PU-1 kernel: PCI: Bridge: 0000:00:1c.4
Apr  5 08:53:35 PU-1 kernel:   IO window: c000-cfff
Apr  5 08:53:35 PU-1 kernel:   MEM window: f7100000-f71fffff
Apr  5 08:53:35 PU-1 kernel:   PREFETCH window: disabled.
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Apr  5 08:53:35 PU-1 kernel: NET: Registered protocol family 2
Apr  5 08:53:35 PU-1 kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr  5 08:53:35 PU-1 kernel: TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
Apr  5 08:53:35 PU-1 kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Apr  5 08:53:35 PU-1 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Apr  5 08:53:35 PU-1 kernel: TCP reno registered
Apr  5 08:53:35 PU-1 kernel: checking if image is initramfs... it is
Apr  5 08:53:35 PU-1 kernel: Freeing initrd memory: 2832k freed
Apr  5 08:53:35 PU-1 kernel: apm: BIOS not found.
Apr  5 08:53:35 PU-1 kernel: audit: initializing netlink socket (disabled)
Apr  5 08:53:35 PU-1 kernel: audit(1365151987.370:1): initialized
Apr  5 08:53:35 PU-1 kernel: highmem bounce pool size: 64 pages
Apr  5 08:53:35 PU-1 kernel: Total HugeTLB memory allocated, 0
Apr  5 08:53:35 PU-1 kernel: VFS: Disk quotas dquot_6.5.1
Apr  5 08:53:35 PU-1 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr  5 08:53:35 PU-1 kernel: ksign: Installing public key data
Apr  5 08:53:35 PU-1 kernel: Loading keyring
Apr  5 08:53:35 PU-1 kernel: io scheduler noop registered
Apr  5 08:53:35 PU-1 kernel: io scheduler anticipatory registered
Apr  5 08:53:35 PU-1 kernel: io scheduler deadline registered
Apr  5 08:53:35 PU-1 kernel: io scheduler cfq registered (default)
Apr  5 08:53:35 PU-1 kernel: assign_interrupt_mode Found MSI capability
Apr  5 08:53:35 PU-1 last message repeated 2 times
Apr  5 08:53:35 PU-1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN0] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN0] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Fan [FAN0] (off)
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN1] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN1] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Fan [FAN1] (off)
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN2] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN2] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Fan [FAN2] (off)
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN3] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN3] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Fan [FAN3] (off)
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN4] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Transitioning device [FAN4] to D3
Apr  5 08:53:35 PU-1 kernel: ACPI: Fan [FAN4] (off)
Apr  5 08:53:35 PU-1 kernel: ACPI: SSDT 7E0EE018, 083B (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
Apr  5 08:53:35 PU-1 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Apr  5 08:53:35 PU-1 kernel: ACPI: SSDT 7E0EFA98, 0303 (r1  PmRef    ApIst     3000 INTL 20051117)
Apr  5 08:53:35 PU-1 kernel: ACPI: SSDT 7E0F0C18, 0119 (r1  PmRef    ApCst     3000 INTL 20051117)
Apr  5 08:53:35 PU-1 kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Apr  5 08:53:35 PU-1 kernel: ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
Apr  5 08:53:35 PU-1 last message repeated 5 times
Apr  5 08:53:35 PU-1 kernel: ACPI: Thermal Zone [TZ00] (28 C)
Apr  5 08:53:35 PU-1 kernel: ACPI: Thermal Zone [TZ01] (30 C)
Apr  5 08:53:35 PU-1 kernel: isapnp: Scanning for PnP cards...
Apr  5 08:53:35 PU-1 kernel: Marking TSC unstable due to: possible TSC halt in C2.
Apr  5 08:53:35 PU-1 kernel: Time: hpet clocksource has been installed.
Apr  5 08:53:35 PU-1 kernel: Switched to high resolution mode on CPU 1
Apr  5 08:53:35 PU-1 kernel: Switched to high resolution mode on CPU 0
Apr  5 08:53:35 PU-1 kernel: isapnp: No Plug & Play device found
Apr  5 08:53:35 PU-1 kernel: Real Time Clock Driver v1.12ac
Apr  5 08:53:35 PU-1 kernel: Non-volatile memory driver v1.2
Apr  5 08:53:35 PU-1 kernel: Linux agpgart interface v0.102
Apr  5 08:53:35 PU-1 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Apr  5 08:53:35 PU-1 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr  5 08:53:35 PU-1 kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr  5 08:53:35 PU-1 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Apr  5 08:53:35 PU-1 kernel: input: Macintosh mouse button emulation as /class/input/input0
Apr  5 08:53:35 PU-1 kernel: PNP: No PS/2 controller found. Probing ports directly.
Apr  5 08:53:35 PU-1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr  5 08:53:35 PU-1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Apr  5 08:53:35 PU-1 kernel: mice: PS/2 mouse device common for all mice
Apr  5 08:53:35 PU-1 kernel: usbcore: registered new interface driver hiddev
Apr  5 08:53:35 PU-1 kernel: usbcore: registered new interface driver usbhid
Apr  5 08:53:35 PU-1 kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Apr  5 08:53:35 PU-1 kernel: TCP cubic registered
Apr  5 08:53:35 PU-1 kernel: Initializing XFRM netlink socket
Apr  5 08:53:35 PU-1 kernel: NET: Registered protocol family 1
Apr  5 08:53:35 PU-1 kernel: NET: Registered protocol family 17
Apr  5 08:53:35 PU-1 kernel: Using IPI No-Shortcut mode
Apr  5 08:53:35 PU-1 kernel:   Magic number: 9:547:876
Apr  5 08:53:35 PU-1 kernel: Freeing unused kernel memory: 280k freed
Apr  5 08:53:35 PU-1 kernel: Write protecting the kernel read-only data: 846k
Apr  5 08:53:35 PU-1 kernel: USB Universal Host Controller Interface driver v3.0
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1a.0: debug port 2
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1a.0: irq 11, io mem 0xf7208000
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Apr  5 08:53:35 PU-1 kernel: usb usb1: configuration #1 chosen from 1 choice
Apr  5 08:53:35 PU-1 kernel: hub 1-0:1.0: USB hub found
Apr  5 08:53:35 PU-1 kernel: hub 1-0:1.0: 2 ports detected
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1d.0: debug port 2
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1d.0: irq 11, io mem 0xf7207000
Apr  5 08:53:35 PU-1 kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Apr  5 08:53:35 PU-1 kernel: usb usb2: configuration #1 chosen from 1 choice
Apr  5 08:53:35 PU-1 kernel: hub 2-0:1.0: USB hub found
Apr  5 08:53:35 PU-1 kernel: hub 2-0:1.0: 2 ports detected
Apr  5 08:53:35 PU-1 kernel: SCSI subsystem initialized
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:00:1f.2[b] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
Apr  5 08:53:35 PU-1 kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Apr  5 08:53:35 PU-1 kernel: usb 1-1: configuration #1 chosen from 1 choice
Apr  5 08:53:35 PU-1 kernel: hub 1-1:1.0: USB hub found
Apr  5 08:53:35 PU-1 kernel: hub 1-1:1.0: 4 ports detected
Apr  5 08:53:35 PU-1 kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2
Apr  5 08:53:35 PU-1 kernel: usb 2-1: configuration #1 chosen from 1 choice
Apr  5 08:53:35 PU-1 kernel: hub 2-1:1.0: USB hub found
Apr  5 08:53:35 PU-1 kernel: hub 2-1:1.0: 6 ports detected
Apr  5 08:53:35 PU-1 kernel: usb 1-1.3: new high speed USB device using ehci_hcd and address 3
Apr  5 08:53:35 PU-1 kernel: usb 1-1.3: configuration #1 chosen from 1 choice
Apr  5 08:53:35 PU-1 kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode
Apr  5 08:53:35 PU-1 kernel: ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
Apr  5 08:53:35 PU-1 kernel: scsi0 : ahci
Apr  5 08:53:35 PU-1 kernel: scsi1 : ahci
Apr  5 08:53:35 PU-1 kernel: scsi2 : ahci
Apr  5 08:53:35 PU-1 kernel: scsi3 : ahci
Apr  5 08:53:35 PU-1 kernel: ata1: SATA max UDMA/133 cmd 0xf885c100 ctl 0x00000000 bmdma 0x00000000 irq 220
Apr  5 08:53:35 PU-1 kernel: ata2: SATA max UDMA/133 cmd 0xf885c180 ctl 0x00000000 bmdma 0x00000000 irq 220
Apr  5 08:53:35 PU-1 kernel: ata3: SATA max UDMA/133 cmd 0xf885c200 ctl 0x00000000 bmdma 0x00000000 irq 220
Apr  5 08:53:35 PU-1 kernel: ata4: SATA max UDMA/133 cmd 0xf885c280 ctl 0x00000000 bmdma 0x00000000 irq 220
Apr  5 08:53:35 PU-1 kernel: usb 2-1.1: new low speed USB device using ehci_hcd and address 3
Apr  5 08:53:35 PU-1 kernel: usb 2-1.1: configuration #1 chosen from 1 choice
Apr  5 08:53:35 PU-1 kernel: input: CHICONY HP Basic USB Keyboard as /class/input/input1
Apr  5 08:53:35 PU-1 kernel: input: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.1
Apr  5 08:53:35 PU-1 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr  5 08:53:35 PU-1 kernel: usb 2-1.2: new low speed USB device using ehci_hcd and address 4
Apr  5 08:53:35 PU-1 kernel: ata1.00: ATA-8: SAMSUNG HD253GJ, 1AJ10001, max UDMA/133
Apr  5 08:53:35 PU-1 kernel: ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Apr  5 08:53:35 PU-1 kernel: ata1.00: configured for UDMA/133
Apr  5 08:53:35 PU-1 kernel: usb 2-1.2: configuration #1 chosen from 1 choice
Apr  5 08:53:35 PU-1 kernel: input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
Apr  5 08:53:35 PU-1 kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2
Apr  5 08:53:35 PU-1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr  5 08:53:35 PU-1 kernel: ata2.00: ATAPI: Optiarc DVD RW AD-5280S, 1.01, max UDMA/100
Apr  5 08:53:35 PU-1 kernel: ata2.00: configured for UDMA/100
Apr  5 08:53:35 PU-1 kernel: ata3: SATA link down (SStatus 0 SControl 0)
Apr  5 08:53:35 PU-1 kernel: ata4: SATA link down (SStatus 0 SControl 0)
Apr  5 08:53:35 PU-1 kernel: scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD253GJ  1AJ1 PQ: 0 ANSI: 5
Apr  5 08:53:35 PU-1 kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Apr  5 08:53:35 PU-1 pcscd: pcscdaemon.c:464:main() pcsc-lite 1.3.1 daemon ready.
Apr  5 08:53:35 PU-1 kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr  5 08:53:35 PU-1 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr  5 08:53:35 PU-1 kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Apr  5 08:53:35 PU-1 kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr  5 08:53:35 PU-1 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr  5 08:53:35 PU-1 kernel:  sda: sda1 sda2
Apr  5 08:53:35 PU-1 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Apr  5 08:53:35 PU-1 kernel: scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-5280S  1.01 PQ: 0 ANSI: 5
Apr  5 08:53:35 PU-1 kernel: kjournald starting.  Commit interval 5 seconds
Apr  5 08:53:35 PU-1 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr  5 08:53:35 PU-1 kernel: SELinux:  Disabled at runtime.
Apr  5 08:53:35 PU-1 kernel: audit(1365151994.662:2): selinux=0 auid=4294967295
Apr  5 08:53:35 PU-1 kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Apr  5 08:53:35 PU-1 kernel: Uniform CD-ROM driver Revision: 3.20
Apr  5 08:53:35 PU-1 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr  5 08:53:35 PU-1 kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
Apr  5 08:53:35 PU-1 kernel: input: Power Button (FF) as /class/input/input3
Apr  5 08:53:35 PU-1 kernel: ACPI: Power Button (FF) [PWRF]
Apr  5 08:53:35 PU-1 kernel: input: Power Button (CM) as /class/input/input4
Apr  5 08:53:35 PU-1 kernel: ACPI: Power Button (CM) [PWRB]
Apr  5 08:53:35 PU-1 kernel: r8168 Gigabit Ethernet driver 8.027.00-NAPI loaded
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
Apr  5 08:53:35 PU-1 kernel: eth%d: RTL8168B/8111B at 0xf8904000, 54:04:a6:bf:22:69, IRQ 219
Apr  5 08:53:35 PU-1 kernel: r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
Apr  5 08:53:35 PU-1 kernel: r8168  Copyright (C) 2011  Realtek NIC software team <nicfae@realtek.com> 
Apr  5 08:53:35 PU-1 kernel:  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <[url]http://www.gnu.org/licenses/[/url]>. 
Apr  5 08:53:35 PU-1 kernel:  This is free software, and you are welcome to redistribute it under certain conditions; see <[url]http://www.gnu.org/licenses/[/url]>. 
Apr  5 08:53:35 PU-1 kernel: input: PC Speaker as /class/input/input5
Apr  5 08:53:35 PU-1 kernel: nvidia: module license 'NVIDIA' taints kernel.
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Apr  5 08:53:35 PU-1 kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module  256.44  Thu Jul 29 01:30:36 PDT 2010
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
Apr  5 08:53:35 PU-1 kernel: hda_codec: ALC887-VD: BIOS auto-probing.
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Apr  5 08:53:35 PU-1 kernel: ACPI: PCI Interrupt 0000:01:00.1[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Apr  5 08:53:35 PU-1 kernel: hda_intel: Disabling MSI
Apr  5 08:53:35 PU-1 kernel: HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
Apr  5 08:53:35 PU-1 kernel: HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
Apr  5 08:53:35 PU-1 kernel: HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
Apr  5 08:53:35 PU-1 kernel: HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
Apr  5 08:53:35 PU-1 kernel: NET: Registered protocol family 10
Apr  5 08:53:35 PU-1 kernel: lo: Disabled Privacy Extensions
Apr  5 08:53:36 PU-1 kernel: md: Autodetecting RAID arrays.
Apr  5 08:53:36 PU-1 kernel: md: autorun ...
Apr  5 08:53:36 PU-1 kernel: md: ... autorun DONE.
Apr  5 08:53:36 PU-1 kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Apr  5 08:53:36 PU-1 kernel: EXT3 FS on sda1, internal journal
Apr  5 08:53:36 PU-1 kernel: Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
Apr  5 08:53:36 PU-1 kernel: IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Apr  5 08:53:36 PU-1 kernel: process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
Apr  5 08:53:36 PU-1 kernel: r8168: eth0: link down
Apr  5 08:53:36 PU-1 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Apr  5 08:53:36 PU-1 kernel: r8168: eth0: link up
Apr  5 08:53:36 PU-1 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Apr  5 08:53:36 PU-1 kernel: r8168: eth0: link up
Apr  5 08:53:36 PU-1 kernel: audit(1365137614.620:3): audit_pid=1933 old=0 by auid=4294967295
Apr  5 08:53:36 PU-1 kernel: Bluetooth: Core ver 2.11
Apr  5 08:53:36 PU-1 kernel: NET: Registered protocol family 31
Apr  5 08:53:36 PU-1 kernel: Bluetooth: HCI device and connection manager initialized
Apr  5 08:53:36 PU-1 kernel: Bluetooth: HCI socket layer initialized
Apr  5 08:53:36 PU-1 kernel: Bluetooth: L2CAP ver 2.8
Apr  5 08:53:36 PU-1 kernel: Bluetooth: L2CAP socket layer initialized
Apr  5 08:53:36 PU-1 kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Apr  5 08:53:36 PU-1 hidd[2155]: Bluetooth HID daemon
Apr  5 08:53:36 PU-1 automount[2204]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master
Apr  5 08:53:36 PU-1 hpiod: 1.6.7 accepting connections at 2208... 
Apr  5 08:53:38 PU-1 xinetd[2277]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Apr  5 08:53:38 PU-1 xinetd[2277]: Started working: 0 available services
Apr  5 08:53:42 PU-1 ntpdate[2292]: no server suitable for synchronization found
Apr  5 08:53:42 PU-1 ntpd[2295]: ntpd 4.2.2p1@1.1570-o Sat Apr 12 14:57:57 UTC 2008 (1)
Apr  5 08:53:42 PU-1 ntpd[2295]: Attemping to register mDNS 
Apr  5 08:53:42 PU-1 ntpd[2295]: *** WARNING *** The programme 'ntpd' uses the Apple Bonjour compatiblity layer of Avahi.
Apr  5 08:53:42 PU-1 ntpd[2295]: *** WARNING *** Please fix your application to use the native API of Avahi!
Apr  5 08:53:42 PU-1 ntpd[2295]: *** WARNING *** For more information see <[url]http://0pointer.de/avahi-compat?s=libdns_sd&e=ntpd[/url]>
Apr  5 08:53:42 PU-1 ntpd[2295]: Unable to register mDNS 
Apr  5 08:53:42 PU-1 ntpd[2297]: precision = 1.000 usec
Apr  5 08:53:42 PU-1 ntpd[2297]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Apr  5 08:53:42 PU-1 ntpd[2297]: Listening on interface wildcard, ::#123 Disabled
Apr  5 08:53:42 PU-1 ntpd[2297]: Listening on interface eth0, fe80::5604:a6ff:febf:2269#123 Enabled
Apr  5 08:53:42 PU-1 ntpd[2297]: Listening on interface lo, ::1#123 Enabled
Apr  5 08:53:42 PU-1 ntpd[2297]: Listening on interface lo, 127.0.0.1#123 Enabled
Apr  5 08:53:42 PU-1 ntpd[2297]: Listening on interface eth0, 172.16.8.157#123 Enabled
Apr  5 08:53:42 PU-1 ntpd[2297]: kernel time sync status 0040
Apr  5 08:53:49 PU-1 kernel: Uniform CAN Interface Driver (unican) v. 8.10: supports CAN-bus-PCIe, CAN-bus-PCI, CAN-bus-ISAm (CAN-bus-MicroPC, CAN-bus-PC104) in PeliCAN mode, (C) 1999-2010 Marathon Ltd.
Apr  5 08:53:49 PU-1 kernel: ACPI: PCI Interrupt 0000:05:01.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Apr  5 08:53:49 PU-1 kernel: unican: CAN-bus-PCI board detected:
Apr  5 08:53:49 PU-1 kernel:   first chip SJA1000 at: 0xf7103000, Irq 10, channel(minor) 0
Apr  5 08:53:49 PU-1 kernel:   second chip SJA1000 at: 0xf7101000, Irq 10, channel(minor) 1
Apr  5 08:53:49 PU-1 kernel: unican: total 2 CAN controllers on 1 boards found
Apr  5 08:53:52 PU-1 smartd[2554]: smartd version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen 
Apr  5 08:53:52 PU-1 smartd[2554]: Home page is [url]http://smartmontools.sourceforge.net/[/url]  
Apr  5 08:53:52 PU-1 smartd[2554]: Opened configuration file /etc/smartd.conf 
Apr  5 08:53:52 PU-1 smartd[2554]: Configuration file /etc/smartd.conf parsed. 
Apr  5 08:53:52 PU-1 smartd[2554]: Device: /dev/sda, opened 
Apr  5 08:53:52 PU-1 smartd[2554]: Device: /dev/sda, found in smartd database. 
Apr  5 08:53:53 PU-1 smartd[2554]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
Apr  5 08:53:53 PU-1 smartd[2554]: Monitoring 1 ATA and 0 SCSI devices 
Apr  5 08:53:53 PU-1 smartd[2556]: smartd has fork()ed into background mode. New PID=2556. 
Apr  5 08:53:59 PU-1 gdm[2575]: gdm_config_parse: Недопустимо задан сервер в конфигурационном файле. Игнорируется!
Apr  5 08:54:00 PU-1 pcscd: winscard.c:219:SCardConnect() Reader E-Gate 0 0 Not Found
Apr  5 08:54:00 PU-1 last message repeated 3 times
Apr  5 08:59:10 PU-1 nmbd[2359]: [2013/04/05 08:59:10, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396) 
Apr  5 08:59:10 PU-1 nmbd[2359]:   ***** 
Apr  5 08:59:10 PU-1 nmbd[2359]:    
Apr  5 08:59:10 PU-1 nmbd[2359]:   Samba name server PU-1 is now a local master browser for workgroup MYGROUP on subnet 172.16.8.157 
Apr  5 08:59:10 PU-1 nmbd[2359]:    
Apr  5 08:59:10 PU-1 nmbd[2359]:   ***** 
Apr  5 09:51:15 PU-1 gconfd (root-5413): запускается (версия 2.14.0), pid 5413 пользователь "root"
Apr  5 09:51:15 PU-1 gconfd (root-5413): Обнаружен разрешённый адрес "xml:readonly:/etc/gconf/gconf.xml.mandatory" к источнику конфигурации только-для-чтения в позиции 0
Apr  5 09:51:15 PU-1 gconfd (root-5413): Обнаружен разрешённый адрес "xml:readwrite:/root/.gconf" к записываемому источнику конфигурации в позиции 1
Apr  5 09:51:15 PU-1 gconfd (root-5413): Обнаружен разрешённый адрес "xml:readonly:/etc/gconf/gconf.xml.defaults" к источнику конфигурации только-для-чтения в позиции 2
Apr  5 09:51:18 PU-1 gconfd (root-5413): Обнаружен разрешённый адрес "xml:readwrite:/root/.gconf" к записываемому источнику конфигурации в позиции 0
Apr  5 09:51:19 PU-1 pcscd: winscard.c:219:SCardConnect() Reader E-Gate 0 0 Not Found
Apr  5 09:51:19 PU-1 last message repeated 4 times
Apr  5 09:51:21 PU-1 setroubleshoot: 2013-04-05 09:51:21,787 [rpc.ERROR] attempt to open server connection failed: (2, '\xd0\x9d\xd0\xb5\xd1\x82 \xd1\x82\xd0\xb0\xd0\xba\xd0\xbe\xd0\xb3\xd0\xbe \xd1\x84\xd0\xb0\xd0\xb9\xd0\xbb\xd0\xb0 \xd0\xb8\xd0\xbb\xd0\xb8 \xd0\xba\xd0\xb0\xd1\x82\xd0\xb0\xd0\xbb\xd0\xbe\xd0\xb3\xd0\xb0')
Apr  5 09:59:45 PU-1 nmbd[2359]: [2013/04/05 09:59:45, 0] nmbd/nmbd.c:process(559)

флешек в компе вставлено аж 3 штуки - samsung, huawei, transcend

12 Ответ от -=Serj=- (05.04.2013 11:51:50 отредактировано -=Serj=-)

  • -=Serj=-
  • -=Serj=-
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 18.03.2011
  • Сообщений: 3,277
  • Репутация : [ 143 | 0 ]
$ grep -A2 "New USB" /var/log/messages

В Ubuntu, видимо, 

$ grep -A2 "New USB" /var/log/dmesg
Да, у меня Ubuntu.
Нет, не глючит.

13 Ответ от igael

  • igael
  • Посетитель
  • Неактивен
  • Зарегистрирован: 05.04.2013
  • Сообщений: 7
  • Репутация : [ 1 | 0 ]
-=Serj=- пишет:

$ grep -A2 "New USB" /var/log/messages

Выше висит прицепленный, нет там такой строки ac а флешка в компе есть, и прекрасно работает

14 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

Значит надо логи настроить. Это уже другой вопрос.

Сайт Vascom

15 Ответ от jashaw5

  • jashaw5
  • jashaw5
  • Пользователь
  • Неактивен
  • Откуда: Мариуполь
  • Зарегистрирован: 19.12.2010
  • Сообщений: 819
  • Репутация : [ 17 | 1 ]
igael⇓ пишет:

yanux.ru

Спасибо, посмотрел.

Segui il tuo corso, e lascia dir le genti

16 Ответ от Fat-Zer (05.04.2013 20:08:59 отредактировано Fat-Zer)

  • Fat-Zer
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 14.10.2010
  • Сообщений: 4,977
  • Репутация : [ 256 | 6 ]
Vascom⇓ пишет:

Значит надо логи настроить. Это уже другой вопрос.

вперёд, с песнями ядро переписывать bx

igael⇓ пишет:

Выше висит прицепленный, нет там такой строки  а флешка в компе есть, и прекрасно работает

ядро и правда сильно не новое... хорошо было бы сразу обновиться.....
если нет желания/возможности, то grep'ни с -i usb. а там уж выбери общую строку.
ещё, как вариант, можно создать правило udev, которое будет писать при подключении/отключении логи в удобной форме... если конечно удав там есть...

95% процентов проблем находятся между клавиатурой и стулом.

17 Ответ от igael

  • igael
  • Посетитель
  • Неактивен
  • Зарегистрирован: 05.04.2013
  • Сообщений: 7
  • Репутация : [ 1 | 0 ]
Fat-Zer⇓ пишет:

ядро и правда сильно не новое... хорошо было бы сразу обновиться.....если нет желания/возможности,

Нету. На Янукс есть сертификат информацоинной безопасности, так что с обновлениями у него все мрачно .
Udev есть.

18 Ответ от afanasev.p

  • afanasev.p
  • Пользователь
  • Неактивен
  • Зарегистрирован: 02.10.2012
  • Сообщений: 126
  • Репутация : [ 13 | 0 ]

Если есть udev, то можно сделать правила для него. Приблизительное решение задачи - запуск скрипта с необходимыми параметрами (названия девайса, время подключения/отключения, etc), который уже будет либо в БД писать инфу, либо в файл, либо на почту сообщение отправлять (чего делать в скрипте - зависит от Вашей фантазии).

И баба с воза, и волки сыты...

19 Ответ от Fat-Zer

  • Fat-Zer
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 14.10.2010
  • Сообщений: 4,977
  • Репутация : [ 256 | 6 ]
igael⇓ пишет:

Нету. На Янукс есть сертификат информацоинной безопасности, так что с обновлениями у него все мрачно .

с переписыванием я погорячился... достаточно пересобрать со включённым CONFIG_USB_ANNOUNCE_NEW_DEVICES=y, но это, как я понял, тоже не дадут...

для удава правила писать можно по-аналогии с виртуалбоксовскими:

# create second tree of USB devices according to
# http://www.virtualbox.org/ticket/7759#comment:5

SUBSYSTEM=="usb_device", ACTION!="remove", RUN="/lib/udev/VBoxCreateUSBNode.sh $major $minor $attr{bDeviceClass}"
SUBSYSTEM=="usb", ACTION!="remove", ENV{DEVTYPE}=="usb_device", RUN="/lib/udev/VBoxCreateUSBNode.sh $major $minor $attr{bDeviceClass}"
SUBSYSTEM=="usb_device", ACTION=="remove", RUN="/lib/udev/VBoxCreateUSBNode.sh --remove $major $minor"
SUBSYSTEM=="usb", ACTION=="remove", ENV{DEVTYPE}=="usb_device", RUN="/lib/udev/VBoxCreateUSBNode.sh --remove $major $minor"

в принципе, достаточно только свой скрипт подставить...

95% процентов проблем находятся между клавиатурой и стулом.