1 Тема от Nazarik86

  • Nazarik86
  • Новичок
  • Неактивен
  • Зарегистрирован: 05.09.2011
  • Сообщений: 32
  • Репутация : [ 0 | 0 ]

Уважаемые gentoo пользователи. подскажите как настроить точпад так чтоб корректно работала прокрутка. объясняю суть: на один и тот же нетбук устанавливались несколько ОС (debian (6,7), ubuntu и ее производные и calculate(все что ни есть версии DE) ну когда стоял родной офтоп). Так вот везде скрол работал без каких либо заморочек, а вот в калькуляторе все ни так, то работает, то не работает. в конце концов приходится отключать прокрутку вообще. сейчас стоит debian могу выложить конфигурации. Только подтолкните куда копать, так как gentoo только осваиваю.

2 Ответ от Fat-Zer

  • Fat-Zer
  • Пользователь
  • Неактивен
  • Откуда: Москва
  • Зарегистрирован: 14.10.2010
  • Сообщений: 4,977
  • Репутация : [ 256 | 6 ]
Nazarik86⇓ пишет:

Только подтолкните куда копать, так как gentoo только осваиваю.

тачпад ведь через synaptics'овский протокол работает? (удостоверится можно в логе иксов)
тогда копать в сторону synclient/настройки в xorg.conf/специальных утилит своего DE...

95% процентов проблем находятся между клавиатурой и стулом.

3 Ответ от zenon

  • zenon
  • zenon
  • Пользователь
  • Неактивен
  • Откуда: Волгоград
  • Зарегистрирован: 04.05.2010
  • Сообщений: 8,794
  • Репутация : [ 315 | 3 ]

У меня тачпад как мышь работает.

История показывает, что во всем новом обычно кроется какой-то подвох.
Классическая ошибка, которую совершают проектировщики
абсолютно надежных систем, - недооценка изобретательности клинических идиотов.

Сайт zenon

4 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]

В зависимости от используемого менеджера окон или рабочего окружения установить, что-либо из...
— gnome-extra/gpointing-device-settings;
— kde-misc/kcm_touchpad;
— kde-misc/synaptiks.

Если используется «дефолтное» рабочее окружение KDE следует проверить «Настройка» — «Параметры системы» — «Устройства ввода».

Специально для вашего тачпада есть пакет — app-misc/tpconfig, попробуйте и его. Если ядро самосборное, проверьте не отлючили ли вы необходимую опцию:

CONFIG_MOUSE_PS2_ALPS:                                                                                                               │  
  │                                                                                                                                      │  
  │ Say Y here if you have an ALPS PS/2 touchpad connected to                                                                            │  
  │ your system.                                                                                                                         │  
  │                                                                                                                                      │  
  │ If unsure, say Y.

Можно попробовать и «джедайский» подход, создав, к примеру, файл

+ /etc/X11/xorg.conf.d/touchpad.conf

# Synaptic touchpad
Section "InputClass"
  Identifier  "Synaptics"
  Driver  "synaptics"
  MatchIsTouchpad "1"
  MatchProduct "Synaptics TouchPad"
  Option  "Protocol" "event"
  Option  "LeftEdge" "1700"
  Option  "RightEdge" "5300"
  Option  "TopEdge" "1700"
  Option  "BottomEdge" "4200"
  Option  "FingerLow" "25"
  Option  "FingerHigh" "30"
  Option  "MaxTapTime" "180"
  Option  "MaxTapMove" "220"
  Option  "VertScrollDelta" "100"
  Option  "MinSpeed" "0.50"
  Option  "MaxSpeed" "0.90"
  Option  "AccelFactor" "0.015"
  Option  "SHMConfig" "on"
  Option  "TapButton1" "1"
  Option  "TapButton2" "2"
  Option  "TapButton3" "3"
  Option  "VertEdgeScroll" "1"
  Option  "HorizEdgeScroll" "1"
EndSection

# Elantech touchpad
Section "InputClass"
  Identifier  "Elantech"
  Driver  "synaptics"
  MatchIsTouchpad "1"
  MatchProduct "Elantech Touchpad"
  Option  "Protocol" "event"
  Option  "SHMConfig" "on"
  Option  "AccelFactor" "0.0320"
  Option  "MaxSpeed" "0.72"
  Option  "Emulate3Buttons" "on"
  Option  "VertTwoFingerScroll" "1"
  Option  "HorizTwoFingerScroll" "1"
  Option  "LockedDrags" "1"
  Option  "LBCornerButton" "2"
  Option  "LeftEdge" "60"
  Option  "RightEdge" "1070"
  Option  "TopEdge" "90"
  Option  "BottomEdge" "680"
  Option  "CoastingSpeed" "0.13"
  Option  "TapButton1" "1"
  Option  "TapButton2" "2"
  Option  "TapButton3" "3"
EndSection

# ALPS Touchpad
Section "InputClass"
  Identifier  "Alps"
  Driver  "synaptics"
  Option  "Protocol" "event"
  MatchIsTouchpad "1"
  MatchProduct "AlpsPS/2 ALPS"
  Option  "LeftEdge" "130"
  Option  "RightEdge" "840"
  Option  "TopEdge" "130"
  Option  "BottomEdge" "640"
  Option  "FingerLow" "25"
  Option  "FingerHigh" "30"
  Option  "MaxTapTime" "180"
  Option  "MaxTapMove" "220"
  Option  "EmulateMidButtonTime" "75"
  Option  "VertEdgeScroll" "true"
  Option  "VertScrollDelta" "20"
  Option  "HorizEdgeScroll" "true"
  Option  "HorizScrollDelta" "20"
  Option  "MinSpeed" "0.60"
  Option  "MaxSpeed" "1.10"
  Option  "AccelFactor" "0.030"
  Option  "EdgeMotionMinSpeed" "200"
  Option  "EdgeMotionMaxSpeed" "200"
  Option  "UpDownScrolling" "1"
  Option  "CircularScrolling" "1"
  Option  "CircScrollDelta" "0.1"
  Option  "CircScrollTrigger" "2"
  Option  "SHMConfig" "on"
  Option  "TapButton1" "1"
EndSection

# Apple touchpad
Section "InputClass"
  Identifier  "apple"
  Driver  "synaptics"
  Option  "Protocol" "event"
  MatchIsTouchpad "1"
  MatchProduct "appletouch"
  Option  "TapButton" "0"
  Option  "VertTwoFingerScroll" "1"
  Option  "TwoFingerButton1" "2"
  Option  "MaxTapMove" "0"
  Option  "MaxDoubleTapTime" "90"
  Option  "LockedDrags" "off"
  Option  "MinSpeed" "1.10"
  Option  "MaxSpeed" "1.30"
  Option  "AccelFactor" "0.08"
  Option  "TapButton3" "2"
  Option  "TapButton2" "3"
  Option  "VertTwoFingerScroll" "1"
  Option  "HorizTwoFingerScroll" "0"
EndSection

Да, и в любом случае нужно показать /var/log/Xorg.0.log.

Был, был и весь вышел...

5 Ответ от Nazarik86 (03.05.2013 19:02:58 отредактировано Nazarik86)

  • Nazarik86
  • Новичок
  • Неактивен
  • Зарегистрирован: 05.09.2011
  • Сообщений: 32
  • Репутация : [ 0 | 0 ]

Это лог из Debiana:

+ открыть спойлер

[    23.748]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    23.749] X Protocol Version 11, Revision 0
[    23.749] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[    23.749] Current Operating System: Linux debian 3.2.0-4-686-pae #1 SMP Debian 3.2.41-2 i686
[    23.749] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=64ec5d9a-ac3c-4f44-9f4a-f57cd614054a ro quiet
[    23.749] Build Date: 17 April 2013  11:13:16AM
[    23.749] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[    23.749] Current version of pixman: 0.26.0
[    23.749]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    23.749] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.750] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May  3 21:07:15 2013
[    23.823] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.900] (==) No Layout section.  Using the first Screen section.
[    23.900] (==) No screen section available. Using defaults.
[    23.900] (**) |-->Screen "Default Screen Section" (0)
"/var/log/Xorg.0.log" [converted] 511 lines, 33169 characters

Щас замучу из Calculate

6 Ответ от Lupo Alberto

  • Откуда: Беларусь, Гомель
  • Зарегистрирован: 04.07.2010
  • Сообщений: 11,183
  • Репутация : [ 571 | 8 ]
Nazarik86⇓ пишет:

Это лог из Debiana:

Это не лог, а его «огрызок» bx

Был, был и весь вышел...

7 Ответ от Nazarik86

  • Nazarik86
  • Новичок
  • Неактивен
  • Зарегистрирован: 05.09.2011
  • Сообщений: 32
  • Репутация : [ 0 | 0 ]

вот полный лог из калькулятора:

+ открыть спойлер

GNU nano 2.3.1           File: /var/log/Xorg.0.log                           

[   178.090]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[   178.090] X Protocol Version 11, Revision 0
[   178.090] Build Operating System: Linux 3.4.5-calculate i686 Gentoo
[   178.090] Current Operating System: Linux calculate 3.6.7-calculate #1 SMP P$
[   178.090] Kernel command line: root=/dev/ram0 initrd=/boot/initrd init=/linu$
[   178.090] Build Date: 21 December 2012  11:26:57AM
[   178.090]
[   178.091] Current version of pixman: 0.28.0
[   178.091]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   178.091] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   178.091] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May  3 21:20:26 20$
[   178.098] (==) Using config file: "/etc/X11/xorg.conf"
[   178.098] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   178.098] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   178.098] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   178.121] (==) ServerLayout "Xorg Configured"
[   178.121] (**) |-->Screen "Monitor" (0)
[   178.121] (**) |   |-->Monitor "StandardMonitor"
[   178.122] (**) |   |-->Device "intelVGA"
[   178.122] (==) Automatically adding devices
[   178.122] (==) Automatically enabling devices
[   178.122] (==) Automatically adding GPU devices
[   178.138] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   178.138]    Entry deleted from font path.
[   178.138] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   178.138]    Entry deleted from font path.
[   178.138] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   178.138]    Entry deleted from font path.
[   178.138] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/10$
[   178.138]    Entry deleted from font path.
[   178.138]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   178.138] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75$
[   178.138]    Entry deleted from font path.
[   178.138]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   178.139] (**) FontPath set to:
/usr/share/fonts/corefonts,
        /usr/share/fonts/misc,
        /usr/share/fonts/droid,
        /usr/share/fonts/misc/
[   178.139] (==) ModulePath set to "/usr/lib/xorg/modules"
[   178.139] (**) Extension "Composite" is enabled
[   178.140] (II) The server relies on udev to provide the list of input devic$
        If no devices become available, reconfigure udev or disable AutoAddDev$
[   178.140] (II) Loader magic: 0x822b620
[   178.140] (II) Module ABI versions:
[   178.140]    X.Org ANSI C Emulation: 0.4
[   178.140]    X.Org Video Driver: 13.0
[   178.140]    X.Org XInput driver : 18.0
[   178.141]    X.Org Server Extension : 7.0
[   178.143] (II) config/udev: Adding drm device (/dev/dri/card0)
[   178.153] (--) PCI:*(0:0:2:0) 8086:a011:1025:0349 rev 0, Mem @ 0x58180000/5$
[   178.153] (--) PCI: (0:0:2:1) 8086:a012:1025:0349 rev 0, Mem @ 0x58100000/5$
[   178.154] (II) Open ACPI successful (/var/run/acpid.socket)
[   178.154] Initializing built-in extension Generic Event Extension
[   178.155] Initializing built-in extension SHAPE
[   178.155] Initializing built-in extension MIT-SHM
[   178.155] Initializing built-in extension XInputExtension
[   178.155] Initializing built-in extension XTEST
[   178.155] Initializing built-in extension BIG-REQUESTS
[   178.155] Initializing built-in extension SYNC
[   178.155] Initializing built-in extension XKEYBOARD
[   178.155] Initializing built-in extension XC-MISC
[   178.155] Initializing built-in extension XINERAMA
[   178.155] Initializing built-in extension XFIXES
[   178.155] Initializing built-in extension RENDER
[   178.155] Initializing built-in extension COMPOSITE
[   178.155] Initializing built-in extension DAMAGE
[   178.155] Initializing built-in extension MIT-SCREEN-SAVER
[   178.155] Initializing built-in extension DOUBLE-BUFFER
[   178.155] Initializing built-in extension RECORD
[   178.155] Initializing built-in extension DPMS
[   178.155] Initializing built-in extension X-Resource
[   178.155] Initializing built-in extension XVideo
[   178.155] Initializing built-in extension XVideo-MotionCompensation
[   178.155] Initializing built-in extension XFree86-VidModeExtension
[   178.155] Initializing built-in extension XFree86-DGA
[   178.155] Initializing built-in extension XFree86-DRI
[   178.155] Initializing built-in extension DRI2
[   178.155] (II) "glx" will be loaded. This was enabled by default and also s$
[   178.155] (II) LoadModule: "dri"
[   178.156] (II) Module "dri" already built-in
[   178.156] (II) LoadModule: "i2c"
[   178.156] (II) Module "i2c" already built-in
[   178.156] (II) LoadModule: "ddc"
[   178.156] (II) Module "ddc" already built-in
[   178.156] (II) LoadModule: "int10"
[   178.175] (II) Loading /usr/lib/xorg/modules/libint10.so
[   178.200] (II) Module int10: vendor="X.Org Foundation"
[   178.200]    compiled for 1.13.0, module version = 1.0.0
[   178.200]    ABI class: X.Org Video Driver, version 13.0
[   178.200] (II) LoadModule: "vbe"
[   178.203] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   178.236] (II) Module vbe: vendor="X.Org Foundation"
[   178.236]    compiled for 1.13.0, module version = 1.1.0
[   178.236]    ABI class: X.Org Video Driver, version 13.0
[   178.236] (II) LoadModule: "glx"
[   178.237] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   178.299] (II) Module glx: vendor="X.Org Foundation"
[   178.299]    compiled for 1.13.0, module version = 1.0.0
[   178.299]    ABI class: X.Org Server Extension, version 7.0
[   178.299] (==) AIGLX enabled
[   178.316] Loading extension GLX
[   178.316] (II) LoadModule: "extmod"
[   178.316] (II) Module "extmod" already built-in
[   178.316] (II) LoadModule: "intel"
[   178.317] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   178.400] (II) Module intel: vendor="X.Org Foundation"
[   178.400]    compiled for 1.13.0, module version = 2.20.15
[   178.400]    Module class: X.Org Video Driver
[   178.400]    ABI class: X.Org Video Driver, version 13.0
[   178.400] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
  4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
        Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
        Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
        Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
        Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
        Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
        Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
        Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
        Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
        Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
        Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
        Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
        ValleyView PO board
[   178.407] (++) using VT number 7

[   178.416] (II) intel(0): using device path '/dev/dri/card0'
[   178.474] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[   178.474] (==) intel(0): RGB weight 888
[   178.474] (==) intel(0): Default visual is TrueColor
[   178.474] (**) intel(0): Option "NoAccel" "False"
[   178.474] (**) intel(0): Option "AccelMethod" "sna"
[   178.474] (**) intel(0): Option "DRI" "True"
[   178.475] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[   178.476] (**) intel(0): Framebuffer tiled
[   178.476] (**) intel(0): Pixmaps tiled
[   178.476] (**) intel(0): 3D buffers tiled
[   178.476] (**) intel(0): Throttling enabled
[   178.476] (**) intel(0): Delayed flush enabled
[   178.476] (**) intel(0): "Tear free" disabled
[   178.476] (**) intel(0): Forcing per-crtc-pixmaps? no
[   178.476] (II) intel(0): Output LVDS1 using monitor section StandardMonitor
[   178.577] (--) intel(0): found backlight control interface acpi_video0 (typ$
[   178.609] (II) intel(0): Output VGA1 has no monitor section
[   178.655] (II) intel(0): EDID for output LVDS1
[   178.655] (II) intel(0): Manufacturer: LGD  Model: 1ff  Serial#: 0
[   178.655] (II) intel(0): Year: 2009  Week: 0
   178.655] (II) intel(0): EDID Version: 1.3
[   178.655] (II) intel(0): Digital Display Input
[   178.655] (II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
[   178.655] (II) intel(0): Gamma: 2.20
[   178.655] (II) intel(0): No DPMS capabilities specified
[   178.655] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   178.655] (II) intel(0): First detailed timing is preferred mode
[   178.655] (II) intel(0): redX: 0.588 redY: 0.347   greenX: 0.331 greenY: 0.$
[   178.656] (II) intel(0): blueX: 0.154 blueY: 0.128   whiteX: 0.313 whiteY: $
[   178.656] (II) intel(0): Manufacturer's mask: 0
[   178.656] (II) intel(0): Supported detailed timing:
[   178.656] (II) intel(0): clock: 41.4 MHz   Image Size:  224 x 126 mm
[   178.656] (II) intel(0): h_active: 1024  h_sync: 1072  h_sync_end 1104 h_bl$
[   178.656] (II) intel(0): v_active: 576  v_sync: 579  v_sync_end 584 v_blank$
[   178.656] (II) intel(0): Supported detailed timing:
[   178.656] (II) intel(0): clock: 41.4 MHz   Image Size:  224 x 126 mm
[   178.656] (II) intel(0): h_active: 1024  h_sync: 1072  h_sync_end 1104 h_bl$
[   178.656] (II) intel(0): v_active: 576  v_sync: 579  v_sync_end 584 v_blank$
[   178.656] (II) intel(0):  M167P�101WS1
[   178.656] (II) intel(0): Unknown vendor-specific block 0
[   178.656] (II) intel(0): EDID (in hex):
[   178.656] (II) intel(0):     00ffffffffffff0030e4ff0100000000
[   178.656] (II) intel(0):     0013010380160d780abfb59658548b27
[   178.656] (II) intel(0):     20505400000001010101010101010101
[   178.656] (II) intel(0):     0101010101012c10008c404011203020
[   178.656] (II) intel(0):     3500e07e0000001b2c10008c40401120
[   178.656] (II) intel(0):     30203500e07e0000001b000000fe004d
[   178.657] (II) intel(0):     31363750803130315753310a00000000
[   178.657] (II) intel(0):     00000000000000000001010a20200010
[   178.657] (II) intel(0): EDID vendor "LGD", prod id 511
[   178.657] (II) intel(0): Printing DDC gathered Modelines:
[   178.657] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync (35.6 kHz eP)
[   178.657] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   178.657] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   178.657] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   178.657] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   178.657] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   178.658] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   178.658] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   178.658] (II) intel(0): Printing probed modes for output LVDS1
[   178.658] (II) intel(0): Modeline "1024x576"x60.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync (35.6 kHz e$
[   178.658] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   178.689] (II) intel(0): EDID for output VGA1
[   178.689] (II) intel(0): Output LVDS1 connected
[   178.689] (II) intel(0): Output VGA1 disconnected
[   178.689] (II) intel(0): Using exact sizes for initial modes
[   178.689] (II) intel(0): Output LVDS1 using initial mode 1024x576
[   178.689] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   178.689] (**) intel(0): Display dimensions: (220, 130) mm
[   178.689] (**) intel(0): DPI set to (118, 112)
[   178.689] (II) Loading sub module "dri2"
[   178.689] (II) LoadModule: "dri2"
[   178.689] (II) Module "dri2" already built-in
[   178.689] (==) Depth 24 pixmap format is 32 bpp
[   178.907] (II) intel(0): SNA initialized with gen3 backend
[   178.907] (==) intel(0): Backing store disabled
[   178.907] (==) intel(0): Silken mouse enabled
[   178.907] (II) intel(0): HW Cursor enabled
[   178.907] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   178.910] (**) intel(0): DPMS enabled
[   178.931] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[   178.931] (II) intel(0): [DRI2] Setup complete
[   178.931] (II) intel(0): [DRI2]   DRI driver: i915
[   178.931] (II) intel(0): direct rendering: DRI2 Enabled
[   178.931] (==) intel(0): hotplug detection: "enabled"
[   178.931] (--) RandR disabled
[   179.260] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   179.260] (II) AIGLX: enabled GLX_INTEL_swap_event
[   179.260] (II) AIGLX: enabled GLX_ARB_create_context
[   179.260] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   179.260] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   179.260] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   179.260] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   179.260] (II) AIGLX: Loaded and initialized i915
[   179.260] (II) GLX: Initialized DRI2 GL provider for screen 0
[   179.263] (II) intel(0): switch to mode 1024x576 on crtc 4 (pipe 1)
[   179.286] (II) intel(0): Setting screen physical size to 270 x 152
[   180.053] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   180.054] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   180.054] (**) Power Button: Applying InputClass "keyboard"
[   180.054] (II) LoadModule: "evdev"
[   180.054] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   180.081] (II) Module evdev: vendor="X.Org Foundation"
[   180.081]    compiled for 1.13.0, module version = 2.7.3
[   180.081]    Module class: X.Org XInput Driver
[   180.081]    ABI class: X.Org XInput driver, version 18.0
[   180.081] (II) Using input driver 'evdev' for 'Power Button'
[   180.082] (**) Power Button: always reports core events
[   180.082] (**) evdev: Power Button: Device: "/dev/input/event4"
[   180.082] (--) evdev: Power Button: Vendor 0 Product 0x1
[   180.082] (--) evdev: Power Button: Found keys
[   180.082] (II) evdev: Power Button: Configuring as keyboard
[   180.082] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   180.082] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   180.082] (**) Option "xkb_rules" "evdev"
[   180.082] (**) Option "xkb_model" "evdev"
[   180.082] (**) Option "xkb_layout" "us"
[   180.333] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[   180.333] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   180.333] (**) Video Bus: Applying InputClass "keyboard"
[   180.333] (II) Using input driver 'evdev' for 'Video Bus'
[   180.334] (**) Video Bus: always reports core events
[   180.334] (**) evdev: Video Bus: Device: "/dev/input/event7"
[   180.334] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   180.334] (--) evdev: Video Bus: Found keys
[   180.334] (II) evdev: Video Bus: Configuring as keyboard
[   180.334] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[   180.334] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   180.334] (**) Option "xkb_rules" "evdev"
[   180.334] (**) Option "xkb_model" "evdev"
[   180.334] (**) Option "xkb_layout" "us"
[   180.337] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   180.337] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   180.337] (**) Power Button: Applying InputClass "keyboard"
[   180.337] (II) Using input driver 'evdev' for 'Power Button'
[   180.337] (**) Power Button: always reports core events
[   180.337] (**) evdev: Power Button: Device: "/dev/input/event1"
[   180.337] (--) evdev: Power Button: Vendor 0 Product 0x1
[   180.337] (--) evdev: Power Button: Found keys
[   180.337] (II) evdev: Power Button: Configuring as keyboard
[   180.337] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[   180.337] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id af
[   180.337] (**) Option "xkb_rules" "evdev"
[   180.338] (**) Option "xkb_model" "evdev"
[   180.338] (**) Option "xkb_layout" "us"
[   180.346] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   180.346] (II) No input driver specified, ignoring this device.
[   180.346] (II) This device may have been added with another device file.
[   180.347] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   180.347] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   180.347] (**) Sleep Button: Applying InputClass "keyboard"
[   180.347] (II) Using input driver 'evdev' for 'Sleep Button'
[   180.347] (**) Sleep Button: always reports core events
[   180.348] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   180.348] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   180.348] (--) evdev: Sleep Button: Found keys
[   180.348] (II) evdev: Sleep Button: Configuring as keyboard
[   180.348] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[   180.348] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   180.348] (**) Option "xkb_rules" "evdev"
[   180.348] (**) Option "xkb_model" "evdev"
[   180.348] (**) Option "xkb_layout" "us"
[   180.350] (II) config/udev: Adding drm device (/dev/dri/card0)
[   180.362] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[   180.362] (II) No input driver specified, ignoring this device.
[   180.362] (II) This device may have been added with another device file.
[   180.364] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[   180.364] (II) No input driver specified, ignoring this device.
[   180.364] (II) This device may have been added with another device file.
[   180.365] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[   180.365] (II) No input driver specified, ignoring this device.
[   180.365] (II) This device may have been added with another device file.
[   180.366] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/event8)
[   180.366] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[   180.366] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[   180.366] (**)  USB OPTICAL MOUSE: always reports core events
[   180.366] (**) evdev:  USB OPTICAL MOUSE: Device: "/dev/input/event8"
[   180.366] (--) evdev:  USB OPTICAL MOUSE: Vendor 0 Product 0x538
[   180.367] (--) evdev:  USB OPTICAL MOUSE: Found 3 mouse buttons
[   180.367] (--) evdev:  USB OPTICAL MOUSE: Found scroll wheel(s)
[   180.367] (--) evdev:  USB OPTICAL MOUSE: Found relative axes
[   180.367] (--) evdev:  USB OPTICAL MOUSE: Found x and y relative axes
[   180.367] (II) evdev:  USB OPTICAL MOUSE: Configuring as mouse
[   180.367] (II) evdev:  USB OPTICAL MOUSE: Adding scrollwheel support
[   180.367] (**) evdev:  USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[   180.367] (**) evdev:  USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   180.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input8/event8"
[   180.367] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 10)
[   180.367] (II) evdev:  USB OPTICAL MOUSE: initialized for relative axes.
[   180.373] (**)  USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[   180.373] (**)  USB OPTICAL MOUSE: (accel) acceleration profile 0
[   180.373] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[   180.373] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[   180.374] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/mouse2)
[   180.375] (II) No input driver specified, ignoring this device.
[   180.375] (II) This device may have been added with another device file.
[   180.383] (II) config/udev: Adding input device CNF9011 (/dev/input/event10)
[   180.383] (**) CNF9011: Applying InputClass "evdev keyboard catchall"
[   180.383] (**) CNF9011: Applying InputClass "keyboard"
[   180.383] (II) Using input driver 'evdev' for 'CNF9011'
[   180.384] (**) CNF9011: always reports core events
[   180.384] (**) evdev: CNF9011: Device: "/dev/input/event10"
[   180.384] (--) evdev: CNF9011: Vendor 0x4f2 Product 0xb175
[   180.384] (--) evdev: CNF9011: Found keys
[   180.384] (II) evdev: CNF9011: Configuring as keyboard
[   180.384] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input10/event10"
[   180.384] (II) XINPUT: Adding extended input device "CNF9011" (type: KEYBOARD, id 11)
[   180.384] (**) Option "xkb_rules" "evdev"
[   180.384] (**) Option "xkb_model" "evdev"
[   180.384] (**) Option "xkb_layout" "us"
[   180.394] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   180.394] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   180.394] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[   180.394] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   180.394] (**) AT Translated Set 2 keyboard: always reports core events
[   180.394] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   180.394] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   180.394] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   180.395] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   180.395] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   180.395] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   180.395] (**) Option "xkb_rules" "evdev"
[   180.395] (**) Option "xkb_model" "evdev"
[   180.395] (**) Option "xkb_layout" "us"
[   180.404] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
[   180.404] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[   180.404] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[   180.404] (**) PS/2 Mouse: always reports core events
[   180.404] (**) evdev: PS/2 Mouse: Device: "/dev/input/event5"
[   180.404] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[   180.404] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[   180.404] (--) evdev: PS/2 Mouse: Found relative axes
[   180.404] (--) evdev: PS/2 Mouse: Found x and y relative axes
[   180.404] (II) evdev: PS/2 Mouse: Configuring as mouse
[   180.404] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[   180.404] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   180.405] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[   180.405] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 13)
[   180.405] (II) evdev: PS/2 Mouse: initialized for relative axes.
[   180.404] (II) evdev: PS/2 Mouse: Configuring as mouse
[   180.404] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[   180.404] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   180.405] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[   180.405] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 13)
[   180.405] (II) evdev: PS/2 Mouse: initialized for relative axes.
[   180.405] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[   180.413] (**) PS/2 Mouse: (accel) acceleration profile 0
[   180.413] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[   180.413] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[   180.414] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[   180.414] (II) No input driver specified, ignoring this device.
[   180.414] (II) This device may have been added with another device file.
[   180.415] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[   180.415] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[   180.415] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[   180.415] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[   180.415] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Alps"
[   180.415] (II) LoadModule: "synaptics"
[   180.423] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   180.404] (II) evdev: PS/2 Mouse: Configuring as mouse
[   180.404] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[   180.404] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   180.405] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[   180.405] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 13)
[   180.405] (II) evdev: PS/2 Mouse: initialized for relative axes.
[   180.405] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[   180.413] (**) PS/2 Mouse: (accel) acceleration profile 0
[   180.413] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[   180.413] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[   180.414] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[   180.414] (II) No input driver specified, ignoring this device.
[   180.414] (II) This device may have been added with another device file.
[   180.415] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[   180.415] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[   180.415] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[   180.415] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[   180.415] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Alps"
[   180.415] (II) LoadModule: "synaptics"
[   180.423] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   180.448] (II) Module synaptics: vendor="X.Org Foundation"
[   180.448]    compiled for 1.13.0, module version = 1.6.2
[   180.448]    Module class: X.Org XInput Driver
[   180.448]    ABI class: X.Org XInput driver, version 18.0
[   180.448] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[   180.448] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[   180.460] (**) Option "Protocol" "event"
[   180.460] (**) Option "Device" "/dev/input/event6"
[   180.460] (II) synaptics: AlpsPS/2 ALPS GlidePoint: ignoring touch events for semi-multitouch device
[   180.460] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 2000
[   180.460] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 1400
[   180.460] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[   180.460] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[   180.460] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle double triple
[   180.460] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[   180.460] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[   180.460] (**) Option "SHMConfig" "on"
[   180.460] (**) Option "LeftEdge" "130"
[   180.461] (**) Option "RightEdge" "840"
[   180.461] (**) Option "TopEdge" "130"
[   180.461] (**) Option "BottomEdge" "640"
[   180.461] (**) Option "FingerLow" "25"
[   180.461] (**) Option "FingerHigh" "30"
[   180.461] (**) Option "MaxTapTime" "180"
[   180.461] (**) Option "MaxTapMove" "220"
[   180.461] (**) Option "EmulateMidButtonTime" "75"
[   180.461] (**) Option "VertScrollDelta" "20"
[   180.461] (**) Option "HorizScrollDelta" "20"
[   180.461] (**) Option "VertEdgeScroll" "true"
[   180.461] (**) Option "HorizEdgeScroll" "true"
[   180.462] (**) Option "EdgeMotionMinSpeed" "200"
[   180.462] (**) Option "EdgeMotionMaxSpeed" "200"
[   180.462] (**) Option "TapButton1" "1"
[   180.462] (**) Option "CircularScrolling" "1"
[   180.462] (**) Option "CircScrollTrigger" "2"
[   180.462] (**) Option "MinSpeed" "0.60"
[   180.462] (**) Option "MaxSpeed" "1.10"
[   180.462] (**) Option "AccelFactor" "0.030"
[   180.462] (**) Option "CircScrollDelta" "0.1"
[   180.463] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[   180.463] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[   180.472] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[   180.472] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 14)
[   180.472] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 1.7
[   180.472] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.83
[   180.472] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.030
[   180.473] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[   180.473] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[   180.473] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[   180.473] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[   180.473] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[   180.474] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[   180.474] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[   180.476] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event9)
[   180.477] (II) No input driver specified, ignoring this device.
[   180.477] (II) This device may have been added with another device file.
[   180.477] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[   180.477] (II) No input driver specified, ignoring this device.
[   180.478] (II) This device may have been added with another device file.
[   223.443] (II) intel(0): EDID vendor "LGD", prod id 511
[   223.443] (II) intel(0): Printing DDC gathered Modelines:
[   223.443] (II) intel(0): Printing DDC gathered Modelines:
[   223.443] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync (35.6 kHz eP)
[   224.303] (II) intel(0): EDID vendor "LGD", prod id 511
[   224.303] (II) intel(0): Printing DDC gathered Modelines:
[   224.304] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync (35.6 kHz eP)
[   224.343] (II) intel(0): EDID vendor "LGD", prod id 511
[   224.343] (II) intel(0): Printing DDC gathered Modelines:
[   224.343] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync (35.6 kHz eP)

8 Ответ от Nazarik86

  • Nazarik86
  • Новичок
  • Неактивен
  • Зарегистрирован: 05.09.2011
  • Сообщений: 32
  • Репутация : [ 0 | 0 ]

log из debiana полный:

+ открыть спойлер

[    24.633]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    24.633] X Protocol Version 11, Revision 0
[    24.633] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[    24.633] Current Operating System: Linux debian 3.2.0-4-686-pae #1 SMP Debian 3.2.41-2 i686
[    24.633] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=64ec5d9a-ac3c-4f44-9f4a-f5$
[    24.633] Build Date: 17 April 2013  11:13:16AM
[    24.633] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[    24.633] Current version of pixman: 0.26.0
[    24.633]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    24.633] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.634] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May  3 15:49:17 2013
[    24.686] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.726] (==) No Layout section.  Using the first Screen section.
[    24.726] (==) No screen section available. Using defaults.
[    24.726] (**) |-->Screen "Default Screen Section" (0)
[    24.726] (**) |   |-->Monitor "<default monitor>"
[    24.756] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    24.756] (==) Automatically adding devices
[    24.756] (==) Automatically enabling devices
[    24.949] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.949]    Entry deleted from font path.
[    25.048] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    25.048]    Entry deleted from font path.
[    25.048] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[    25.048] (==) ModulePath set to "/usr/lib/xorg/modules"
[    25.048] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.048] (II) Loader magic: 0xb77b15a0
[    25.048] (II) Module ABI versions:
[    25.048]    X.Org ANSI C Emulation: 0.4
[    25.048]    X.Org Video Driver: 12.1
[    25.048]    X.Org XInput driver : 16.0
[    25.048]    X.Org Server Extension : 6.0
[    25.050] (--) PCI:*(0:0:2:0) 8086:a011:1025:0349 rev 0, Mem @ 0x58180000/524288, 0x40000000/268435456, 0x58$
[    25.051] (--) PCI: (0:0:2:1) 8086:a012:1025:0349 rev 0, Mem @ 0x58100000/524288
[    25.051] (II) Open ACPI successful (/var/run/acpid.socket)
[    25.051] (II) LoadModule: "extmod"
[    25.074] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    25.090] (II) Module extmod: vendor="X.Org Foundation"
[    25.090]    compiled for 1.12.4, module version = 1.0.0
[    25.090]    Module class: X.Org Server Extension
[    25.090]    ABI class: X.Org Server Extension, version 6.0
[    25.090] (II) Loading extension SELinux
[    25.090] (II) Loading extension MIT-SCREEN-SAVER
[    25.090] (II) Loading extension XFree86-VidModeExtension
[    25.090] (II) Loading extension XFree86-DGA
[    25.090] (II) Loading extension DPMS
[    25.090] (II) Loading extension XVideo
[    25.090] (II) Loading extension XVideo-MotionCompensation
[    25.090] (II) Loading extension X-Resource
[    25.090] (II) LoadModule: "dbe"
[    25.091] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    25.102] (II) Module dbe: vendor="X.Org Foundation"
[    25.102]    compiled for 1.12.4, module version = 1.0.0
[    25.102]    Module class: X.Org Server Extension
[    25.103]    ABI class: X.Org Server Extension, version 6.0
[    25.103] (II) Loading extension DOUBLE-BUFFER
[    25.103] (II) LoadModule: "glx"
[    25.103] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.130] (II) Module glx: vendor="X.Org Foundation"
[    25.130]    compiled for 1.12.4, module version = 1.0.0
[    25.130]    ABI class: X.Org Server Extension, version 6.0
[    25.130] (==) AIGLX enabled
[    25.130] (II) Loading extension GLX
[    25.130] (II) LoadModule: "record"
[    25.130] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    25.131] (II) Module record: vendor="X.Org Foundation"
[    25.131]    compiled for 1.12.4, module version = 1.13.0
[    25.131]    Module class: X.Org Server Extension
[    25.131]    ABI class: X.Org Server Extension, version 6.0
[    25.131] (II) Loading extension RECORD
[    25.131] (II) LoadModule: "dri"
[    25.132] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    25.149] (II) Module dri: vendor="X.Org Foundation"
[    25.149]    compiled for 1.12.4, module version = 1.0.0
[    25.149]    ABI class: X.Org Server Extension, version 6.0
[    25.149] (II) Loading extension XFree86-DRI
[    25.149] (II) LoadModule: "dri2"
[    25.149] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    25.166] (II) Module dri2: vendor="X.Org Foundation"
[    25.166]    compiled for 1.12.4, module version = 1.2.0
[    25.166]    ABI class: X.Org Server Extension, version 6.0
[    25.166] (II) Loading extension DRI2
[    25.166] (==) Matched intel as autoconfigured driver 0
[    25.166] (==) Matched vesa as autoconfigured driver 1
[    25.166] (==) Matched fbdev as autoconfigured driver 2
[    25.166] (==) Assigned the driver to the xf86ConfigLayout
[    25.166] (II) LoadModule: "intel"
[    25.168] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    25.287] (II) Module intel: vendor="X.Org Foundation"
[    25.287]    compiled for 1.12.3.902, module version = 2.19.0
[    25.287]    Module class: X.Org Video Driver
[    25.287]    ABI class: X.Org Video Driver, version 12.1
[    25.287] (II) LoadModule: "vesa"
[    25.288] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.334] (II) Module vesa: vendor="X.Org Foundation"
[    25.334]    compiled for 1.12.1, module version = 2.3.1
[    25.334]    Module class: X.Org Video Driver
[    25.334]    ABI class: X.Org Video Driver, version 12.0
[    25.334] (II) LoadModule: "fbdev"
[    25.335] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.375] (II) Module fbdev: vendor="X.Org Foundation"
[    25.375]    compiled for 1.12.1, module version = 0.4.2
[    25.375]    ABI class: X.Org Video Driver, version 12.0
[    25.376] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
        Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
        Ivybridge Server (GT2)
[    25.380] (II) VESA: driver for VESA chipsets: vesa
[    25.380] (II) FBDEV: driver for framebuffer: fbdev
[    25.380] (++) using VT number 7

[    25.396] (WW) Falling back to old probe method for vesa
[    25.396] (WW) Falling back to old probe method for fbdev
[    25.396] (II) Loading sub module "fbdevhw"
[    25.396] (II) LoadModule: "fbdevhw"
[    25.397] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    25.556] (II) Module fbdevhw: vendor="X.Org Foundation"
[    25.556]    compiled for 1.12.4, module version = 0.0.2
[    25.556]    ABI class: X.Org Video Driver, version 12.1
[    25.557] drmOpenDevice: node name is /dev/dri/card0
[    25.557] drmOpenDevice: open result is 9, (OK)
[    25.557] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    25.557] drmOpenDevice: node name is /dev/dri/card0
[    25.557] drmOpenDevice: open result is 9, (OK)
[    25.557] drmOpenByBusid: drmOpenMinor returns 9
[    25.557] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    25.558] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    25.558] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    25.558] (==) intel(0): RGB weight 888
[    25.558] (==) intel(0): Default visual is TrueColor
[    25.558] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[    25.558] (--) intel(0): Chipset: "Pineview GM"
[    25.558] (**) intel(0): Relaxed fencing enabled
[    25.558] (**) intel(0): Wait on SwapBuffers? enabled
[    25.558] (**) intel(0): Triple buffering? enabled
[    25.559] (**) intel(0): Framebuffer tiled
[    25.559] (**) intel(0): Pixmaps tiled
[    25.559] (**) intel(0): 3D buffers tiled
[    25.576] (**) intel(0): SwapBuffers wait enabled
[    25.576] (==) intel(0): video overlay key set to 0x101fe
[    25.577] (II) intel(0): Output LVDS1 has no monitor section
[    25.677] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    25.708] (II) intel(0): Output VGA1 has no monitor section
[    25.708] (II) intel(0): EDID for output LVDS1
[    25.708] (II) intel(0): Manufacturer: LGD  Model: 1ff  Serial#: 0
[    25.708] (II) intel(0): Year: 2009  Week: 0
[    25.708] (II) intel(0): EDID Version: 1.3
[    25.708] (II) intel(0): Digital Display Input
[    25.708] (II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
[    25.708] (II) intel(0): Gamma: 2.20
[    25.708] (II) intel(0): No DPMS capabilities specified
[    25.708] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    25.708] (II) intel(0): First detailed timing is preferred mode
[    25.708] (II) intel(0): redX: 0.588 redY: 0.347   greenX: 0.331 greenY: 0.546
[    25.709] (II) intel(0): blueX: 0.154 blueY: 0.128   whiteX: 0.313 whiteY: 0.329
[    25.709] (II) intel(0): Manufacturer's mask: 0
[    25.709] (II) intel(0): Supported detailed timing:
[    25.709] (II) intel(0): clock: 41.4 MHz   Image Size:  224 x 126 mm
[    25.709] (II) intel(0): h_active: 1024  h_sync: 1072  h_sync_end 1104 h_blank_end 1164 h_border: 0
[    25.709] (II) intel(0): v_active: 576  v_sync: 579  v_sync_end 584 v_blanking: 593 v_border: 0
[    25.709] (II) intel(0): Supported detailed timing:
[    25.709] (II) intel(0): clock: 41.4 MHz   Image Size:  224 x 126 mm
[    25.709] (II) intel(0): h_active: 1024  h_sync: 1072  h_sync_end 1104 h_blank_end 1164 h_border: 0
[    25.709] (II) intel(0): v_active: 576  v_sync: 579  v_sync_end 584 v_blanking: 593 v_border: 0
[    25.709] (II) intel(0): Supported detailed timing:
[    25.709] (II) intel(0): clock: 41.4 MHz   Image Size:  224 x 126 mm
[    25.709] (II) intel(0): h_active: 1024  h_sync: 1072  h_sync_end 1104 h_blank_end 1164 h_border: 0
[    25.709] (II) intel(0): v_active: 576  v_sync: 579  v_sync_end 584 v_blanking: 593 v_border: 0
[    25.709] (II) intel(0):  M167P�101WS1
[    25.709] (II) intel(0): Unknown vendor-specific block 0
[    25.709] (II) intel(0): EDID (in hex):
[    25.709] (II) intel(0):     00ffffffffffff0030e4ff0100000000
[    25.709] (II) intel(0):     0013010380160d780abfb59658548b27
[    25.709] (II) intel(0):     20505400000001010101010101010101
[    25.709] (II) intel(0):     0101010101012c10008c404011203020
[    25.709] (II) intel(0):     3500e07e0000001b2c10008c40401120
[    25.710] (II) intel(0):     30203500e07e0000001b000000fe004d
[    25.710] (II) intel(0):     31363750803130315753310a00000000
[    25.710] (II) intel(0):     00000000000000000001010a20200010
[    25.710] (II) intel(0): EDID vendor "LGD", prod id 511
[    25.727] (II) intel(0): Printing DDC gathered Modelines:
[    25.727] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync$
[    25.727] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    25.727] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    25.727] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    25.727] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    25.727] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    25.727] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    25.728] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    25.728] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    25.728] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    25.728] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    25.728] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    25.728] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    25.728] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    25.728] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    25.728] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    25.728] (II) intel(0): Printing probed modes for output LVDS1
[    25.728] (II) intel(0): Modeline "1024x576"x60.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsyn$
[    25.729] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31$
[    25.756] (II) intel(0): EDID for output VGA1
[    25.756] (II) intel(0): Output LVDS1 connected
[    25.756] (II) intel(0): Output VGA1 disconnected
[    25.756] (II) intel(0): Using exact sizes for initial modes
[    25.756] (II) intel(0): Output LVDS1 using initial mode 1024x576
[    25.756] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    25.756] (II) intel(0): Kernel page flipping support detected, enabling
[    25.756] (**) intel(0): Display dimensions: (220, 130) mm
[    25.756] (**) intel(0): DPI set to (118, 112)
[    25.756] (II) Loading sub module "fb"
[    25.756] (II) LoadModule: "fb"
[    25.757] (II) Loading /usr/lib/xorg/modules/libfb.so
[    25.773] (II) Module fb: vendor="X.Org Foundation"
[    25.773]    compiled for 1.12.4, module version = 1.0.0
[    25.773]    ABI class: X.Org ANSI C Emulation, version 0.4
[    25.773] (II) Loading sub module "dri2"
[    25.773] (II) LoadModule: "dri2"
[    25.773] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    25.773] (II) Module dri2: vendor="X.Org Foundation"
[    25.774]    compiled for 1.12.4, module version = 1.2.0
[    25.774]    ABI class: X.Org Server Extension, version 6.0
[    25.774] (II) UnloadModule: "vesa"
[    25.774] (II) Unloading vesa
[    25.774] (II) UnloadModule: "fbdev"
[    25.774] (II) Unloading fbdev
[    25.774] (II) UnloadSubModule: "fbdevhw"
[    25.774] (II) Unloading fbdevhw
[    25.774] (==) Depth 24 pixmap format is 32 bpp
[    25.775] (II) intel(0): [DRI2] Setup complete
[    25.775] (II) intel(0): [DRI2]   DRI driver: i915
[    25.775] (II) intel(0): Allocated new frame buffer 1024x576 stride 4096, tiled
[    25.783] (II) UXA(0): Driver registered support for the following operations:
[    25.783] (II)         solid
[    25.783] (II)         copy
[    25.783] (II)         composite (RENDER acceleration)
[    25.783] (II)         put_image
[    25.783] (II)         get_image
[    25.783] (==) intel(0): Backing store disabled
[    25.783] (==) intel(0): Silken mouse enabled
[    25.783] (II) intel(0): Initializing HW Cursor
[    25.784] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    25.788] (==) intel(0): DPMS enabled
[    25.788] (==) intel(0): Intel XvMC decoder disabled
[    25.788] (II) intel(0): Set up textured video
[    25.788] (II) intel(0): Set up overlay video
[    25.788] (II) intel(0): direct rendering: DRI2 Enabled
[    25.788] (==) intel(0): hotplug detection: "enabled"
[    25.806] (--) RandR disabled
[    25.806] (II) Initializing built-in extension Generic Event Extension
[    25.806] (II) Initializing built-in extension SHAPE
[    25.806] (II) Initializing built-in extension MIT-SHM
[    25.806] (II) Initializing built-in extension XInputExtension
[    25.806] (II) Initializing built-in extension XTEST
[    25.806] (II) Initializing built-in extension BIG-REQUESTS
[    25.806] (II) Initializing built-in extension SYNC
[    25.806] (II) Initializing built-in extension XKEYBOARD
[    25.806] (II) Initializing built-in extension XC-MISC
[    25.806] (II) Initializing built-in extension SECURITY
[    25.806] (II) Initializing built-in extension XINERAMA
[    25.806] (II) Initializing built-in extension XFIXES
[    25.806] (II) Initializing built-in extension RENDER
[    25.806] (II) Initializing built-in extension RANDR
[    25.806] (II) Initializing built-in extension COMPOSITE
[    25.806] (II) Initializing built-in extension DAMAGE
[    25.807] (II) SELinux: Disabled on system
[    26.110] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    26.110] (II) AIGLX: enabled GLX_INTEL_swap_event
[    26.110] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    26.110] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    26.110] (II) AIGLX: Loaded and initialized i915
[    26.110] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.112] (II) intel(0): Setting screen physical size to 270 x 152
[    26.621] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    26.621] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.621] (II) LoadModule: "evdev"
[    26.621] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.635] (II) Module evdev: vendor="X.Org Foundation"
[    26.635]    compiled for 1.12.1, module version = 2.7.0
[    26.635]    Module class: X.Org XInput Driver
[    26.635]    ABI class: X.Org XInput driver, version 16.0
[    26.635] (II) Using input driver 'evdev' for 'Power Button'
[    26.635] (**) Power Button: always reports core events
[    26.635] (**) evdev: Power Button: Device: "/dev/input/event5"
[    26.635] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.635] (--) evdev: Power Button: Found keys
[    26.635] (II) evdev: Power Button: Configuring as keyboard
[    26.635] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    26.635] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.635] (**) Option "xkb_rules" "evdev"
[    26.635] (**) Option "xkb_model" "pc105"
[    26.635] (**) Option "xkb_layout" "us,ru"
[    26.636] (**) Option "xkb_variant" ","
[    26.636] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    26.711] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    26.711] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    26.711] (II) Using input driver 'evdev' for 'Video Bus'
[    26.711] (**) Video Bus: always reports core events
[    26.712] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    26.712] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    26.712] (--) evdev: Video Bus: Found keys
[    26.712] (II) evdev: Video Bus: Configuring as keyboard
[    26.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/$
[    26.712] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    26.712] (**) Option "xkb_rules" "evdev"
[    26.712] (**) Option "xkb_model" "pc105"
[    26.712] (**) Option "xkb_layout" "us,ru"
[    26.712] (**) Option "xkb_variant" ","
[    26.712] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    26.714] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    26.714] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.714] (II) Using input driver 'evdev' for 'Power Button'
[    26.714] (**) Power Button: always reports core events
[    26.714] (**) evdev: Power Button: Device: "/dev/input/event2"
[    26.714] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.714] (--) evdev: Power Button: Found keys
[    26.714] (II) evdev: Power Button: Configuring as keyboard
[    26.714] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event$
[    26.714] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id af
[    26.715] (**) Option "xkb_rules" "evdev"
[    26.715] (**) Option "xkb_model" "pc105"
[    26.715] (**) Option "xkb_layout" "us,ru"
[    26.715] (**) Option "xkb_variant" ","
[    26.715] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    26.716] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    26.717] (II) No input driver specified, ignoring this device.
[    26.717] (II) This device may have been added with another device file.
[    26.717] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    26.718] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    26.718] (II) Using input driver 'evdev' for 'Sleep Button'
[    26.718] (**) Sleep Button: always reports core events
[    26.718] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    26.718] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    26.718] (--) evdev: Sleep Button: Found keys
[    26.718] (II) evdev: Sleep Button: Configuring as keyboard
[    26.718] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event$
[    26.718] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    26.718] (**) Option "xkb_rules" "evdev"
[    26.718] (**) Option "xkb_model" "pc105"
[    26.718] (**) Option "xkb_layout" "us,ru"
[    26.718] (**) Option "xkb_variant" ","
[    26.718] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    26.720] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    26.720] (II) No input driver specified, ignoring this device.
[    26.720] (II) This device may have been added with another device file.
[    26.721] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    26.721] (II) No input driver specified, ignoring this device.
[    26.721] (II) This device may have been added with another device file.
[    26.722] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[    26.722] (II) No input driver specified, ignoring this device.
[    26.722] (II) This device may have been added with another device file.
[    26.723] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/event1)
[    26.723] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[    26.723] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[    26.723] (**)  USB OPTICAL MOUSE: always reports core events
[    26.723] (**) evdev:  USB OPTICAL MOUSE: Device: "/dev/input/event1"
[    26.723] (--) evdev:  USB OPTICAL MOUSE: Vendor 0 Product 0x538
[    26.723] (--) evdev:  USB OPTICAL MOUSE: Found 3 mouse buttons
[    26.724] (--) evdev:  USB OPTICAL MOUSE: Found scroll wheel(s)
[    26.724] (--) evdev:  USB OPTICAL MOUSE: Found relative axes
[    26.724] (--) evdev:  USB OPTICAL MOUSE: Found x and y relative axes
[    26.724] (II) evdev:  USB OPTICAL MOUSE: Configuring as mouse
[    26.724] (II) evdev:  USB OPTICAL MOUSE: Adding scrollwheel support
[    26.724] (**) evdev:  USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[    26.724] (**) evdev:  USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeou$
[    26.724] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1$
[    26.724] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 10)
[    26.724] (II) evdev:  USB OPTICAL MOUSE: initialized for relative axes.
[    26.725] (**)  USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[    26.725] (**)  USB OPTICAL MOUSE: (accel) acceleration profile 0
[    26.725] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[    26.725] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[    26.726] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/mouse0)
[    26.726] (II) No input driver specified, ignoring this device.
[    26.726] (II) This device may have been added with another device file.
[    26.727] (II) config/udev: Adding input device CNF9011 (/dev/input/event7)
[    26.727] (**) CNF9011: Applying InputClass "evdev keyboard catchall"
[    26.727] (II) Using input driver 'evdev' for 'CNF9011'
[    26.727] (**) CNF9011: always reports core events
[    26.727] (**) evdev: CNF9011: Device: "/dev/input/event7"
[    26.727] (--) evdev: CNF9011: Vendor 0x4f2 Product 0xb175
[    26.727] (--) evdev: CNF9011: Found keys
[    26.727] (II) evdev: CNF9011: Configuring as keyboard
[    26.727] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7$
[    26.727] (II) XINPUT: Adding extended input device "CNF9011" (type: KEYBOARD, id 11)
[    26.727] (**) Option "xkb_rules" "evdev"
[    26.728] (**) Option "xkb_model" "pc105"
[    26.728] (**) Option "xkb_layout" "us,ru"
[    26.728] (**) Option "xkb_variant" ","
[    26.728] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    26.730] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    26.730] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    26.730] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    26.730] (**) AT Translated Set 2 keyboard: always reports core events
[    26.730] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    26.730] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    26.730] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    26.730] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    26.730] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    26.730] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    26.730] (**) Option "xkb_rules" "evdev"
[    26.730] (**) Option "xkb_model" "pc105"
[    26.730] (**) Option "xkb_layout" "us,ru"
[    26.730] (**) Option "xkb_variant" ","
[    26.730] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    26.732] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event12)
[    26.732] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    26.732] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    26.732] (**) PS/2 Mouse: always reports core events
[    26.733] (**) evdev: PS/2 Mouse: Device: "/dev/input/event12"
[    26.733] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    26.733] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    26.733] (--) evdev: PS/2 Mouse: Found relative axes
[    26.733] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    26.733] (II) evdev: PS/2 Mouse: Configuring as mouse
[    26.733] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    26.733] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.733] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[    26.733] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 13)
[    26.733] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    26.734] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    26.734] (**) PS/2 Mouse: (accel) acceleration profile 0
[    26.734] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    26.734] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    26.734] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
[    26.735] (II) No input driver specified, ignoring this device.
[    26.735] (II) This device may have been added with another device file.
[    26.735] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event13)
[    26.736] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    26.736] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    26.736] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[    26.736] (II) LoadModule: "synaptics"
[    26.736] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    26.752] (II) Module synaptics: vendor="X.Org Foundation"
[    26.752]    compiled for 1.12.4, module version = 1.6.2
[    26.753]    Module class: X.Org XInput Driver
[    26.753]    ABI class: X.Org XInput driver, version 16.0
[    26.753] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    26.753] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    26.753] (**) Option "Device" "/dev/input/event13"
[    26.768] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 2000
[    26.768] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 1400
[    26.768] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    26.768] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    26.768] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    26.769] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    26.769] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    26.769] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    26.769] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    26.772] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[    26.772] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 14)
[    26.772] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    26.772] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[    26.772] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.082
[    26.773] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    26.773] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    26.773] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    26.773] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    26.773] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    26.775] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[    26.775] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    26.776] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    26.776] (II) No input driver specified, ignoring this device.
[    26.776] (II) This device may have been added with another device file.
[    26.779] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
[    26.779] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    26.780] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    26.780] (**) ACPI Virtual Keyboard Device: always reports core events
[    26.780] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
[    26.780] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    26.780] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    26.780] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    26.780] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event14"
[    26.780] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15)
[    26.780] (**) Option "xkb_rules" "evdev"
[    26.781] (**) Option "xkb_model" "pc105"
[    26.781] (**) Option "xkb_layout" "us,ru"
[    26.781] (**) Option "xkb_variant" ","
[    26.781] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    26.831] (II) intel(0): EDID vendor "LGD", prod id 511
[    26.831] (II) intel(0): Printing DDC gathered Modelines:
[    26.831] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync$
[    31.618] (II) intel(0): EDID vendor "LGD", prod id 511
[    31.618] (II) intel(0): Printing DDC gathered Modelines:
[    31.619] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync$
[    56.658] (II) intel(0): EDID vendor "LGD", prod id 511
[    56.658] (II) intel(0): Printing DDC gathered Modelines:
[    56.658] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync$
[    59.636] (II) intel(0): EDID vendor "LGD", prod id 511
[    59.637] (II) intel(0): Printing DDC gathered Modelines:
[    59.637] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync$
[    63.577] (II) intel(0): EDID vendor "LGD", prod id 511
[    63.577] (II) intel(0): Printing DDC gathered Modelines:
[    63.577] (II) intel(0): Modeline "1024x576"x0.0   41.40  1024 1072 1104 1164  576 579 584 593 +hsync -vsync$

9 Ответ от ormorph

  • ormorph
  • ormorph
  • Пользователь
  • Неактивен
  • Зарегистрирован: 21.02.2010
  • Сообщений: 1,575
  • Репутация : [ 64 | 0 ]

Nazarik86
У вас не какие настройки не прописаны на тачпад?
это в /usr/share/X11/xorg.conf.d/50-synaptics.conf.
Ну и либо в /etc/X11/xorg.conf.
По тому что видно по логу иксов у вас включена круговая прокрутка.
Так как у вас включен параметр Option "CircScrollTrigger" "2"
Это означает что действует от правого верхнего угла ведешь палец по диагонали и начинаешь делать круговые движения в одну либо другую сторону.

Я вообще привык к двух пальцевому скролингу.

10 Ответ от Nazarik86

  • Nazarik86
  • Новичок
  • Неактивен
  • Зарегистрирован: 05.09.2011
  • Сообщений: 32
  • Репутация : [ 0 | 0 ]

Можно сделать бекап и залить в калькулятор? Если да то, что сливать? Или где конфигурашку поправить?

11 Ответ от ormorph

  • ormorph
  • ormorph
  • Пользователь
  • Неактивен
  • Зарегистрирован: 21.02.2010
  • Сообщений: 1,575
  • Репутация : [ 64 | 0 ]
Nazarik86⇓ пишет:

Можно сделать бекап и залить в калькулятор? Если да то, что сливать? Или где конфигурашку поправить?

Я уже сказал в каких файлах это прописано, можете попробовать их содержимое выложить, а так самое простое это взять и поставить скрипт в автозагрузку переопределения параметров скролинга.

Для двух пальцевого вертикального скролинга хватит всего лишь одной команды в консоли  

[b]synclient[/b] VertTwoFingerScroll="1"

А так все эти выводы что вы приводили, мало толку дают о текущем положении, например параметров для debian не видно, лучше всего показать вывод команды synclient без параметров.
Что для кальки что для Debian.

Вот и поймете что в скрипт вбивать )

12 Ответ от ormorph

  • ormorph
  • ormorph
  • Пользователь
  • Неактивен
  • Зарегистрирован: 21.02.2010
  • Сообщений: 1,575
  • Репутация : [ 64 | 0 ]
Nazarik86⇓ пишет:

Можно сделать бекап и залить в калькулятор? Если да то, что сливать? Или где конфигурашку поправить?

Я уже сказал в каких файлах это прописано, можете попробовать их содержимое выложить, а так самое простое это взять и поставить скрипт в автозагрузку переопределения параметров скролинга.

Для двух пальцевого вертикального скролинга хватит всего лишь одной команды в консоли  

[b]synclient[/b] VertTwoFingerScroll="1"

А так все эти выводы что вы приводили, мало толку дают о текущем положении, например параметров для debian не видно, лучше всего показать вывод команды synclient без параметров.
Что для кальки что для Debian.

Вот и поймете что в скрипт вбивать )

13 Ответ от Nazarik86

  • Nazarik86
  • Новичок
  • Неактивен
  • Зарегистрирован: 05.09.2011
  • Сообщений: 32
  • Репутация : [ 0 | 0 ]

По ходу хода парохода нашел вот такую инструкцию: http://bb.comp-house.ru/comp-house.repo … aptic-alps . Мож кому тоже сгодится. Я вроде разобрался.