io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
vesafb: mode is 1280x1024x16, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90011800000, using 2560k, total 2560k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
Fixed MDIO Bus: probed
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: vegas registered
TCP: yeah registered
Registering the dns_resolver key type
registered taskstats version 1
powernow-k8: Found 1 AMD FX(tm)-6100 Six-Core Processor (6 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (3300 MHz)
powernow-k8: 1 : pstate 1 (3000 MHz)
powernow-k8: 2 : pstate 2 (2400 MHz)
powernow-k8: 3 : pstate 3 (1800 MHz)
powernow-k8: 4 : pstate 4 (1400 MHz)
Freeing unused kernel memory: 576k freed
BFS CPU scheduler v0.424 by Con Kolivas.
udevd[616]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe60a000
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 72 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc90011794000, 10:bf:48:7e:3a:12, XID 0c900800 IRQ 72
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
SCSI subsystem initialized
libata version 3.00 loaded.
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:07:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 ohci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.0: irq 20, io mem 0xfe608000
firewire_ohci 0000:07:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
xhci_hcd 0000:03:00.0: irq 46, io mem 0xfe500000
xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 79 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
8139too 0000:07:05.0: eth1: RealTek RTL8139 at 0xffffc90011796000, 54:e6:fc:85:7f:76, IRQ 20
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe606000
xhci_hcd 0000:05:00.0: irq 50, io mem 0xfe300000
xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 86 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 xhci_hcd
usb usb5: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 xhci_hcd
usb usb7: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 8
ohci_hcd 0000:00:16.0: irq 22, io mem 0xfe605000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI Host Controller
usb usb8: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 ohci_hcd
usb usb8: SerialNumber: 0000:00:16.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 9
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe609000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: EHCI Host Controller
usb usb9: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 ehci_hcd
usb usb9: SerialNumber: 0000:00:12.2
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 10
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 21, io mem 0xfe607000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: EHCI Host Controller
usb usb10: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 ehci_hcd
usb usb10: SerialNumber: 0000:00:13.2
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 11
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 23, io mem 0xfe604000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb11: New USB device found, idVendor=1d6b, idProduct=0002
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: EHCI Host Controller
usb usb11: Manufacturer: Linux 3.4.0-10.dmz.1-liquorix-amd64 ehci_hcd
usb usb11: SerialNumber: 0000:00:16.2
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b380 irq 19
ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410100 irq 51
ata8: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410180 irq 51
ahci 0000:06:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210100 irq 47
ata10: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210180 irq 47
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
firewire_core 0000:07:06.0: created device fw0: GUID 001e8c0000559476, S400
usb 5-1: new low-speed USB device number 2 using xhci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-8: Hitachi HDS721050CLA362, JP2OA39C, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: WDC WD6400AARS-00Y5B1, 80.00A80, max UDMA/133
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata3.00: ATAPI: ASUS DRW-24B5ST, 1.00, max UDMA/100
ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN01, max UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD6400AARS-0 80.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
ata3.00: configured for UDMA/100
ata4.00: configured for UDMA/133
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM ASUS DRW-24B5ST 1.00 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN01 PQ: 0 ANSI: 5
usb 5-1: New USB device found, idVendor=04d9, idProduct=1702
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Keyboard
usb 5-1: Manufacturer:
usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr1
input: USB Keyboard as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:04D9:1702.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:05:00.0-1/input0
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
input: USB Keyboard as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:05:00.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 10-2: new high-speed USB device number 2 using ehci_hcd
Refined TSC clocksource calibration: 3311.111 MHz.
Switching to clocksource tsc
usb 10-2: New USB device found, idVendor=046d, idProduct=0829
usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-2: Product: Webcam C110
usb 10-2: Manufacturer:
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-3: new low-speed USB device number 2 using ohci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c05a
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Optical Mouse
usb 3-3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb3/3-3/3-3:1.0/input/input4
generic-usb 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-3/input0
Adding 6143988k swap on /dev/sda2. Priority:-1 extents:1 across:6143988k
udevd[1182]: starting version 175
udevd[1193]: renamed network interface eth0 to eth2
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
microcode: CPU0: patch_level=0x06000629
lp: driver loaded but no devices found
wmi: Mapper loaded
microcode: CPU1: patch_level=0x06000629
microcode: CPU2: patch_level=0x06000629
microcode: CPU3: patch_level=0x06000629
microcode: CPU4: patch_level=0x06000629
microcode: CPU5: patch_level=0x06000629
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Webcam C110 (046d:0829)
input: Webcam C110 as /devices/pci0000:00/0000:00:13.2/usb10/10-2/10-2:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xbafe00 already in use
usbcore: registered new interface driver snd-usb-audio
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
hda_intel: Disabling MSI
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input18
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1773) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
r8169 0000:02:00.0: eth2: link down
ADDRCONF(NETDEV_UP): eth2: link is not ready
8139too 0000:07:05.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
init: alsa-restore main process (1930) terminated with status 99
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
vboxdrv: Found 6 processor cores.
vboxdrv: fAsync=0 offMin=0x37a offMax=0x4241
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=10901 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=11012 PROTO=UDP SPT=55555 DPT=59263 LEN=28
eth1: no IPv6 routers present
init: plymouth-stop pre-start process (2575) terminated with status 1
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=108.160.162.108 DST=192.168.0.64 LEN=231 TOS=0x04 PREC=0x00 TTL=45 ID=644 DF PROTO=TCP SPT=80 DPT=37364 WINDOW=83 RES=0x00 ACK PSH URGP=0
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=12777 PROTO=UDP SPT=55555 DPT=59263 LEN=28
fuse init (API version 7.18)
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=62.80.225.187 DST=192.168.0.64 LEN=48 TOS=0x04 PREC=0x00 TTL=117 ID=3478 PROTO=UDP SPT=49699 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=62.80.225.187 DST=192.168.0.64 LEN=48 TOS=0x04 PREC=0x00 TTL=117 ID=3490 PROTO=UDP SPT=49699 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=217.17.89.149 DST=192.168.0.64 LEN=48 TOS=0x04 PREC=0x00 TTL=114 ID=22161 PROTO=UDP SPT=58817 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=16158 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=16269 PROTO=UDP SPT=55555 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=108.160.162.108 DST=192.168.0.64 LEN=231 TOS=0x04 PREC=0x00 TTL=45 ID=645 DF PROTO=TCP SPT=80 DPT=37364 WINDOW=83 RES=0x00 ACK PSH URGP=0
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=17953 PROTO=UDP SPT=55555 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=62.80.225.187 DST=192.168.0.64 LEN=48 TOS=0x04 PREC=0x00 TTL=117 ID=5672 PROTO=UDP SPT=49699 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=24649 PROTO=UDP SPT=55555 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:90:94:e4:3d:aa:02:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=49025 PROTO=2
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=217.17.89.149 DST=192.168.0.64 LEN=48 TOS=0x04 PREC=0x00 TTL=114 ID=1351 PROTO=UDP SPT=58817 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=49009 PROTO=UDP SPT=55555 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=52978 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=63034 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=64827 PROTO=UDP SPT=55555 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=2965 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=10785 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=13536 PROTO=UDP SPT=55555 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=17652 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=22951 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=25150 PROTO=UDP SPT=55555 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=29542 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=34297 PROTO=UDP SPT=55555 DPT=59070 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=36015 PROTO=UDP SPT=55555 DPT=59263 LEN=28
[UFW BLOCK] IN=eth1 OUT= MAC=54:e6:fc:85:7f:76:90:94:e4:3d:aa:02:08:00 SRC=85.113.135.102 DST=192.168.0.64 LEN=48 TOS=0x08 PREC=0x00 TTL=123 ID=39548 PROTO=UDP SPT=55555 DPT=59070 LEN=28