1 (30.06.2013 22:45:13 отредактировано makkavei)

Добрый вечер!Мужики,пытаюсь использовать ноут в качестве медиацентра телевизора.Подключение-через VGA,hdmi ноут не имеет(asys p50ij;pentium dual core T4400@2.2GHz;видеочипсет intel GM45(1гиг видеопамяти)).Основная ОС-Opensuse 12.3;для эксперимента попробовал поставить дополнительно mint 15 cinnamon.Вопрос в том,что на выходе имею разрешение 1024 на 768 в обоих системах(и цветность неудовлетворительная),а хочу получить хотя-бы 1366 на 768.Пробовал XBMC,на минте работает,но разрешение низкое,на opensus спрашивает драйвер(XBMC needs hardware accelerated OpenGL reendering.Install an appropriate grafics driver).В системе он не установлен и система говорит,что не нуждается в проприоритетных драйверах,на сайте интела драйверов на моё железо я не нашёл.Реально ли приподнять качество сигнала по VGA?К стати и цветность по вга намного хуже,чем при использовании винды на моем ноуте(очень не хочу на неё возвращаться).Или все эти танцы с бубном не стоят затраченного времени и остается ждать покупки "чего-то там" для телика?Спасибо!!!

Надо думать, телевизор не знает DDC2 и ничего о себе системе не говорит. Прописывайте его характеристики в xorg.conf

3 (01.07.2013 22:15:16 отредактировано makkavei)

Не могу найти xorg.conf,система говорит что нет такого файла или каталога.Где его искать?Или его необходимо создать(как он должен выглядеть?) и положить куда-то?Телевизор Philips 42 PFL 3007 H как искать(определить?) характеристики,которые необходимо прописать в конфиге?

4

Покажите /var/log/Xorg.0.log.

Был, был и весь вышел...

5

Вот он:

+ открыть спойлер

 Консоль:
[    18.113]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[    18.113] X Protocol Version 11, Revision 0
[    18.113] Build Operating System: openSUSE SUSE LINUX
[    18.113] Current Operating System: Linux linux-k9ms.site 3.7.10-1.16-pae #1 SMP Fri May 31 20:21:23 UTC 2013 (97c14ba) i686
[    18.113] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.16-pae root=UUID=e2c51915-3937-4c81-bee7-1020a6c5c6eb resume=/dev/disk/by-id/ata-WDC_WD3200BEVT-80A0RT0_WD-WX11A30S1875-part1 splash=silent quiet showopts
[    18.113] Build Date: 30 April 2013  08:23:18AM
[    18.113] 
[    18.113] Current version of pixman: 0.28.2
[    18.113]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    18.113] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.113] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul  1 20:57:12 2013
[    18.261] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    18.261] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.521] (==) No Layout section.  Using the first Screen section.
[    18.521] (==) No screen section available. Using defaults.
[    18.521] (**) |-->Screen "Default Screen Section" (0)
[    18.521] (**) |   |-->Monitor "<default monitor>"
[    18.521] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    18.521] (==) Automatically adding devices
[    18.521] (==) Automatically enabling devices
[    18.521] (==) Automatically adding GPU devices
[    18.854] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    19.665]     Entry deleted from font path.
[    19.907] (==) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/ghostscript/,
    /usr/share/fonts/cyrillic:unscaled,
    /usr/share/fonts/truetype/,
    built-ins
[    19.907] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    19.907] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    19.907] (II) Loader magic: 0x8261620
[    19.907] (II) Module ABI versions:
[    19.907]     X.Org ANSI C Emulation: 0.4
[    19.907]     X.Org Video Driver: 13.1
[    19.907]     X.Org XInput driver : 18.0
[    19.907]     X.Org Server Extension : 7.0
[    19.907] (II) config/udev: Adding drm device (/dev/dri/card0)
[    19.909] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 9, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[    19.909] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 9, Mem @ 0xfe800000/1048576
[    19.909] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    19.909] Initializing built-in extension Generic Event Extension
[    19.909] Initializing built-in extension SHAPE
[    19.909] Initializing built-in extension MIT-SHM
[    19.909] Initializing built-in extension XInputExtension
[    19.909] Initializing built-in extension XTEST
[    19.909] Initializing built-in extension BIG-REQUESTS
[    19.910] Initializing built-in extension SYNC
[    19.910] Initializing built-in extension XKEYBOARD
[    19.910] Initializing built-in extension XC-MISC
[    19.910] Initializing built-in extension SECURITY
[    19.910] Initializing built-in extension XINERAMA
[    19.910] Initializing built-in extension XFIXES
[    19.910] Initializing built-in extension RENDER
[    19.910] Initializing built-in extension RANDR
[    19.910] Initializing built-in extension COMPOSITE
[    19.910] Initializing built-in extension DAMAGE
[    19.910] Initializing built-in extension MIT-SCREEN-SAVER
[    19.910] Initializing built-in extension DOUBLE-BUFFER
[    19.910] Initializing built-in extension RECORD
[    19.910] Initializing built-in extension DPMS
[    19.910] Initializing built-in extension X-Resource
[    19.910] Initializing built-in extension XVideo
[    19.910] Initializing built-in extension XVideo-MotionCompensation
[    19.910] Initializing built-in extension XFree86-VidModeExtension
[    19.910] Initializing built-in extension XFree86-DGA
[    19.910] Initializing built-in extension XFree86-DRI
[    19.910] Initializing built-in extension DRI2
[    19.910] (II) "glx" will be loaded by default.
[    19.910] (II) LoadModule: "dri2"
[    19.910] (II) Module "dri2" already built-in
[    19.910] (II) LoadModule: "glamoregl"
[    19.949] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    19.950] (II) Module glamoregl: vendor="X.Org Foundation"
[    19.950]     compiled for 1.13.2, module version = 0.5.0
[    19.950]     ABI class: X.Org ANSI C Emulation, version 0.4
[    19.950] (II) LoadModule: "glx"
[    19.951] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    19.951] (II) Module glx: vendor="X.Org Foundation"
[    19.951]     compiled for 1.13.2, module version = 1.0.0
[    19.951]     ABI class: X.Org Server Extension, version 7.0
[    19.951] (==) AIGLX enabled
[    19.951] Loading extension GLX
[    19.951] (==) Matched intel as autoconfigured driver 0
[    19.951] (==) Matched intel as autoconfigured driver 1
[    19.951] (==) Matched modesetting as autoconfigured driver 2
[    19.951] (==) Matched fbdev as autoconfigured driver 3
[    19.951] (==) Matched vesa as autoconfigured driver 4
[    19.951] (==) Assigned the driver to the xf86ConfigLayout
[    19.951] (II) LoadModule: "intel"
[    19.951] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    19.952] (II) Module intel: vendor="X.Org Foundation"
[    19.952]     compiled for 1.13.1, module version = 2.20.19
[    19.952]     Module class: X.Org Video Driver
[    19.952]     ABI class: X.Org Video Driver, version 13.1
[    19.952] (II) LoadModule: "modesetting"
[    19.953] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    19.953] (II) Module modesetting: vendor="X.Org Foundation"
[    19.953]     compiled for 1.13.1, module version = 0.6.0
[    19.953]     Module class: X.Org Video Driver
[    19.953]     ABI class: X.Org Video Driver, version 13.1
[    19.953] (II) LoadModule: "fbdev"
[    19.953] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    19.954] (II) Module fbdev: vendor="X.Org Foundation"
[    19.954]     compiled for 1.13.1, module version = 0.4.3
[    19.954]     Module class: X.Org Video Driver
[    19.954]     ABI class: X.Org Video Driver, version 13.1
[    19.954] (II) LoadModule: "vesa"
[    19.954] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    19.954] (II) Module vesa: vendor="X.Org Foundation"
[    19.954]     compiled for 1.13.1, module version = 2.3.2
[    19.954]     Module class: X.Org Video Driver
[    19.954]     ABI class: X.Org Video Driver, version 13.1
[    19.954] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
[    19.955] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    19.955] (II) FBDEV: driver for framebuffer: fbdev
[    19.955] (II) VESA: driver for VESA chipsets: vesa
[    19.955] (++) using VT number 7

[    19.955] (WW) Falling back to old probe method for modesetting
[    19.955] (WW) Falling back to old probe method for fbdev
[    19.955] (II) Loading sub module "fbdevhw"
[    19.955] (II) LoadModule: "fbdevhw"
[    19.956] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    19.956] (II) Module fbdevhw: vendor="X.Org Foundation"
[    19.956]     compiled for 1.13.2, module version = 0.0.2
[    19.956]     ABI class: X.Org Video Driver, version 13.1
[    19.956] (WW) Falling back to old probe method for vesa
[    19.957] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    19.957] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    19.957] (==) intel(0): RGB weight 888
[    19.957] (==) intel(0): Default visual is TrueColor
[    19.957] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    19.957] (**) intel(0): Relaxed fencing enabled
[    19.957] (**) intel(0): Wait on SwapBuffers? enabled
[    19.957] (**) intel(0): Triple buffering? enabled
[    19.957] (**) intel(0): Framebuffer tiled
[    19.957] (**) intel(0): Pixmaps tiled
[    19.957] (**) intel(0): 3D buffers tiled
[    19.957] (**) intel(0): SwapBuffers wait enabled
[    19.957] (==) intel(0): video overlay key set to 0x101fe
[    19.957] (II) intel(0): Output LVDS1 has no monitor section
[    19.957] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    19.996] (II) intel(0): Output VGA1 has no monitor section
[    20.124] (II) intel(0): Output HDMI1 has no monitor section
[    20.172] (II) intel(0): Output DP1 has no monitor section
[    20.220] (II) intel(0): Output DP2 has no monitor section
[    20.220] (II) intel(0): EDID for output LVDS1
[    20.220] (II) intel(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[    20.220] (II) intel(0): Year: 2009  Week: 0
[    20.220] (II) intel(0): EDID Version: 1.3
[    20.220] (II) intel(0): Digital Display Input
[    20.220] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    20.220] (II) intel(0): Gamma: 2.20
[    20.220] (II) intel(0): No DPMS capabilities specified
[    20.220] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    20.220] (II) intel(0): First detailed timing is preferred mode
[    20.220] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    20.220] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    20.220] (II) intel(0): Manufacturer's mask: 0
[    20.220] (II) intel(0): Supported detailed timing:
[    20.220] (II) intel(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    20.220] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    20.220] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    20.220] (II) intel(0): Supported detailed timing:
[    20.220] (II) intel(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    20.220] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    20.220] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    20.220] (II) intel(0):  SAMSUNG
[    20.220] (II) intel(0):  LTN156AT02P06
[    20.220] (II) intel(0): EDID (in hex):
[    20.220] (II) intel(0):     00ffffffffffff004ca3415400000000
[    20.220] (II) intel(0):     00130103902213780ac8959e57549226
[    20.220] (II) intel(0):     0f505400000001010101010101010101
[    20.220] (II) intel(0):     010101010101411c56a0500016303020
[    20.220] (II) intel(0):     250058c21000001a411c56a050001630
[    20.220] (II) intel(0):     3020250058c21000001a000000fe0053
[    20.220] (II) intel(0):     414d53554e470a2020202020000000fe
[    20.220] (II) intel(0):     004c544e3135364154303250303600c4
[    20.220] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    20.220] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    20.220] (II) intel(0): Printing probed modes for output LVDS1
[    20.220] (II) intel(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[    20.220] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    20.220] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    20.220] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    20.220] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    20.252] (II) intel(0): EDID for output VGA1
[    20.380] (II) intel(0): EDID for output HDMI1
[    20.428] (II) intel(0): EDID for output DP1
[    20.480] (II) intel(0): EDID for output DP2
[    20.480] (II) intel(0): Output LVDS1 connected
[    20.480] (II) intel(0): Output VGA1 disconnected
[    20.480] (II) intel(0): Output HDMI1 disconnected
[    20.480] (II) intel(0): Output DP1 disconnected
[    20.480] (II) intel(0): Output DP2 disconnected
[    20.480] (II) intel(0): Using exact sizes for initial modes
[    20.480] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    20.480] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    20.480] (II) intel(0): Kernel page flipping support detected, enabling
[    20.480] (==) intel(0): DPI set to (96, 96)
[    20.480] (II) Loading sub module "fb"
[    20.480] (II) LoadModule: "fb"
[    20.480] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.710] (II) Module fb: vendor="X.Org Foundation"
[    20.710]     compiled for 1.13.2, module version = 1.0.0
[    20.710]     ABI class: X.Org ANSI C Emulation, version 0.4
[    20.710] (II) Loading sub module "glamoregl"
[    20.710] (II) LoadModule: "glamoregl"
[    20.710] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    20.710] (II) Module glamoregl: vendor="X.Org Foundation"
[    20.710]     compiled for 1.13.2, module version = 0.5.0
[    20.710]     ABI class: X.Org ANSI C Emulation, version 0.4
[    20.710] (II) glamor: OpenGL accelerated X.org driver based.
[    21.284] (II) glamor: EGL version 1.4 (DRI2):
[    21.290] (II) intel(0): glamor detected, initialising egl layer.
[    21.290] (II) Loading sub module "dri2"
[    21.290] (II) LoadModule: "dri2"
[    21.290] (II) Module "dri2" already built-in
[    21.290] (II) UnloadModule: "modesetting"
[    21.290] (II) Unloading modesetting
[    21.290] (II) UnloadModule: "fbdev"
[    21.290] (II) Unloading fbdev
[    21.290] (II) UnloadSubModule: "fbdevhw"
[    21.290] (II) Unloading fbdevhw
[    21.290] (II) UnloadModule: "vesa"
[    21.290] (II) Unloading vesa
[    21.290] (==) Depth 24 pixmap format is 32 bpp
[    21.290] (II) intel(0): [DRI2] Setup complete
[    21.290] (II) intel(0): [DRI2]   DRI driver: i965
[    21.290] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    21.302] (II) UXA(0): Driver registered support for the following operations:
[    21.302] (II)         solid
[    21.302] (II)         copy
[    21.302] (II)         composite (RENDER acceleration)
[    21.302] (II)         put_image
[    21.302] (II)         get_image
[    21.302] (==) intel(0): Backing store disabled
[    21.302] (==) intel(0): Silken mouse enabled
[    21.302] (II) intel(0): Initializing HW Cursor
[    21.302] (II) intel(0): Use standard UXA acceleration.
[    21.302] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    21.304] (==) intel(0): DPMS enabled
[    21.304] (==) intel(0): Intel XvMC decoder enabled
[    21.304] (II) intel(0): Set up textured video
[    21.304] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    21.304] (II) intel(0): direct rendering: DRI2 Enabled
[    21.304] (==) intel(0): hotplug detection: "enabled"
[    21.328] (--) RandR disabled
[    21.343] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    21.343] (II) AIGLX: enabled GLX_INTEL_swap_event
[    21.343] (II) AIGLX: enabled GLX_ARB_create_context
[    21.343] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    21.343] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    21.343] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    21.343] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    21.343] (II) AIGLX: Loaded and initialized i965
[    21.343] (II) GLX: Initialized DRI2 GL provider for screen 0
[    21.344] (II) intel(0): Setting screen physical size to 361 x 203
[    23.559] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    23.559] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.559] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.559] (**) Power Button: Applying InputClass "LocalKeyboard"
[    23.559] (II) LoadModule: "evdev"
[    23.559] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.560] (II) Module evdev: vendor="X.Org Foundation"
[    23.560]     compiled for 1.13.1, module version = 2.7.3
[    23.560]     Module class: X.Org XInput Driver
[    23.560]     ABI class: X.Org XInput driver, version 18.0
[    23.560] (II) Using input driver 'evdev' for 'Power Button'
[    23.560] (**) Power Button: always reports core events
[    23.560] (**) evdev: Power Button: Device: "/dev/input/event4"
[    23.560] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.560] (--) evdev: Power Button: Found keys
[    23.560] (II) evdev: Power Button: Configuring as keyboard
[    23.560] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    23.560] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.560] (**) Option "xkb_rules" "evdev"
[    23.560] (**) Option "xkb_model" "evdev"
[    23.560] (**) Option "xkb_layout" "us_intl"
[    23.598] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    23.598] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.598] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.598] (**) Video Bus: Applying InputClass "LocalKeyboard"
[    23.598] (II) Using input driver 'evdev' for 'Video Bus'
[    23.598] (**) Video Bus: always reports core events
[    23.598] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    23.598] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.598] (--) evdev: Video Bus: Found keys
[    23.598] (II) evdev: Video Bus: Configuring as keyboard
[    23.598] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    23.598] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    23.598] (**) Option "xkb_rules" "evdev"
[    23.598] (**) Option "xkb_model" "evdev"
[    23.598] (**) Option "xkb_layout" "us_intl"
[    23.599] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    23.599] (II) No input driver specified, ignoring this device.
[    23.599] (II) This device may have been added with another device file.
[    23.599] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    23.599] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    23.599] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    23.599] (**) Sleep Button: Applying InputClass "LocalKeyboard"
[    23.599] (II) Using input driver 'evdev' for 'Sleep Button'
[    23.599] (**) Sleep Button: always reports core events
[    23.600] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    23.600] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    23.600] (--) evdev: Sleep Button: Found keys
[    23.600] (II) evdev: Sleep Button: Configuring as keyboard
[    23.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    23.600] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id af
[    23.600] (**) Option "xkb_rules" "evdev"
[    23.600] (**) Option "xkb_model" "evdev"
[    23.600] (**) Option "xkb_layout" "us_intl"
[    23.600] (II) config/udev: Adding drm device (/dev/dri/card0)
[    23.601] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event11)
[    23.601] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    23.601] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    23.601] (**) USB 2.0 Camera: Applying InputClass "LocalKeyboard"
[    23.601] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[    23.601] (**) USB 2.0 Camera: always reports core events
[    23.601] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event11"
[    23.601] (--) evdev: USB 2.0 Camera: Vendor 0x13d3 Product 0x5130
[    23.601] (--) evdev: USB 2.0 Camera: Found keys
[    23.601] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[    23.601] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input11/event11"
[    23.601] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 9)
[    23.601] (**) Option "xkb_rules" "evdev"
[    23.601] (**) Option "xkb_model" "evdev"
[    23.601] (**) Option "xkb_layout" "us_intl"
[    23.602] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[    23.602] (II) No input driver specified, ignoring this device.
[    23.602] (II) This device may have been added with another device file.
[    23.602] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[    23.602] (II) No input driver specified, ignoring this device.
[    23.602] (II) This device may have been added with another device file.
[    23.602] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event10)
[    23.602] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
[    23.602] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
[    23.602] (II) Using input driver 'evdev' for 'A4Tech USB Mouse'
[    23.602] (**) A4Tech USB Mouse: always reports core events
[    23.602] (**) evdev: A4Tech USB Mouse: Device: "/dev/input/event10"
[    23.602] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xa
[    23.602] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons
[    23.602] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s)
[    23.602] (--) evdev: A4Tech USB Mouse: Found relative axes
[    23.602] (--) evdev: A4Tech USB Mouse: Found x and y relative axes
[    23.603] (II) evdev: A4Tech USB Mouse: Configuring as mouse
[    23.603] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support
[    23.603] (**) evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
[    23.603] (**) evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    23.603] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input10/event10"
[    23.603] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 10)
[    23.603] (II) evdev: A4Tech USB Mouse: initialized for relative axes.
[    23.603] (**) A4Tech USB Mouse: (accel) keeping acceleration scheme 1
[    23.603] (**) A4Tech USB Mouse: (accel) acceleration profile 0
[    23.603] (**) A4Tech USB Mouse: (accel) acceleration factor: 2.000
[    23.603] (**) A4Tech USB Mouse: (accel) acceleration threshold: 4
[    23.604] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse1)
[    23.604] (II) No input driver specified, ignoring this device.
[    23.604] (II) This device may have been added with another device file.
[    23.604] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event7)
[    23.604] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[    23.604] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[    23.604] (**) Asus Laptop extra buttons: Applying InputClass "LocalKeyboard"
[    23.604] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[    23.604] (**) Asus Laptop extra buttons: always reports core events
[    23.604] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event7"
[    23.604] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[    23.604] (--) evdev: Asus Laptop extra buttons: Found keys
[    23.604] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[    23.604] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input7/event7"
[    23.604] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[    23.604] (**) Option "xkb_rules" "evdev"
[    23.604] (**) Option "xkb_model" "evdev"
[    23.604] (**) Option "xkb_layout" "us_intl"
[    23.605] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    23.605] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    23.605] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    23.605] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[    23.605] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    23.605] (**) AT Translated Set 2 keyboard: always reports core events
[    23.605] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    23.605] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    23.605] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    23.605] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    23.605] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    23.605] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    23.605] (**) Option "xkb_rules" "evdev"
[    23.605] (**) Option "xkb_model" "evdev"
[    23.605] (**) Option "xkb_layout" "us_intl"
[    23.606] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event1)
[    23.606] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    23.606] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    23.606] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    23.606] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    23.606] (II) LoadModule: "synaptics"
[    23.606] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    23.606] (II) Module synaptics: vendor="X.Org Foundation"
[    23.606]     compiled for 1.13.2, module version = 1.6.3
[    23.606]     Module class: X.Org XInput Driver
[    23.606]     ABI class: X.Org XInput driver, version 18.0
[    23.606] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    23.606] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.606] (**) Option "Device" "/dev/input/event1"
[    23.612] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[    23.612] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088
[    23.612] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704
[    23.612] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    23.612] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    23.612] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    23.612] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    23.612] (**) Option "HorizScrollDelta" "0"
[    23.612] (**) Option "TapButton1" "1"
[    23.612] (**) Option "TapButton2" "3"
[    23.612] (**) Option "TapButton3" "2"
[    23.612] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.612] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.621] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input1/event1"
[    23.621] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[    23.622] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    23.622] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    23.622] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.154
[    23.622] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    23.622] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    23.622] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    23.622] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    23.622] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.622] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    23.622] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    23.622] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    23.623] (II) No input driver specified, ignoring this device.
[    23.623] (II) This device may have been added with another device file.
[    37.185] (II) intel(0): EDID vendor "SEC", prod id 21569
[    37.185] (II) intel(0): Printing DDC gathered Modelines:
[    37.185] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[    41.088] (II) intel(0): EDID vendor "SEC", prod id 21569
[    41.088] (II) intel(0): Printing DDC gathered Modelines:
[    41.088] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[    59.339] (II) intel(0): EDID vendor "SEC", prod id 21569
[    59.339] (II) intel(0): Printing DDC gathered Modelines:
[    59.339] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   780.237] FreeType: couldn't find encoding 'microsoft-cp1251' for '/usr/share/fonts/ghostscript/c059033l.pfb'
[  1490.900] FreeType: couldn't find encoding 'microsoft-cp1251' for '/usr/share/fonts/ghostscript/c059033l.pfb'

6

makkavei⇓ пишет:

Не могу найти xorg.conf,система говорит что нет такого файла или каталога.Где его искать?

makkavei⇓ пишет:

[    18.261] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    18.261] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

Был, был и весь вышел...

7

По адресу /usr/share/X11/xorg.conf.d находятся:
05-glamor.conf
10-evdev.conf
11-mouse.conf
50-device.conf
50-monitor.conf
50-screen.conf
50-synaptics.conf
50-vmmouse.conf
50-wacom.conf
Что делаем?

Xorg -configure

9

/var/log/Xorg.0.log вы показали с подключённым телевизором?

В KDE есть возможность настраивать подключаемые мониторы (их разрешение, ориентацию, взаимное расположение экранов), используя «Параметры системы».

http://storage2.static.itmages.ru/i/13/0701/s_1372705062_4932689_4bd551773c.png

Был, был и весь вышел...

10

Кажись сумел запороть систему,по адресу /usr/share/X11/xorg.conf.d был ещё один файл,который я заметил после того как переименовал.Теперь отвалился вай-фай,работаю по кабелю.Пробую запустить Xorg -configure через alt+f2-ничего не происходит.
Простите,/var/log/Xorg.0.log я показывал с отключенным телевизором.В параметрах системы настройки подключения второго монитора крутил как только фантазия позволяла,но выше 1024 на 768 не прыгнул.Сейчас переключусь на mint 15 cinnamon так как она не повреждённая,и покажу вывод /var/log/Xorg.0.log.Спасибо!

11

Загрузился с cinnamonа.Вот его файл /var/log/Xorg.0.log:

+ открыть спойлер

 Консоль:
[    23.375]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    23.375] X Protocol Version 11, Revision 0
[    23.375] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[    23.375] Current Operating System: Linux sofico-P50IJ 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:19:42 UTC 2013 i686
[    23.375] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=648882fb-958e-4509-beaa-9209979cd97a ro quiet splash vt.handoff=7
[    23.375] Build Date: 17 April 2013  10:42:56PM
[    23.375] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[    23.375] Current version of pixman: 0.28.2
[    23.375]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    23.375] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.376] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul  1 22:46:24 2013
[    23.389] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.389] (==) No Layout section.  Using the first Screen section.
[    23.389] (==) No screen section available. Using defaults.
[    23.389] (**) |-->Screen "Default Screen Section" (0)
[    23.389] (**) |   |-->Monitor "<default monitor>"
[    23.389] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    23.389] (==) Automatically adding devices
[    23.389] (==) Automatically enabling devices
[    23.389] (==) Automatically adding GPU devices
[    23.390] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.390]     Entry deleted from font path.
[    23.390] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    23.390]     Entry deleted from font path.
[    23.390] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    23.390]     Entry deleted from font path.
[    23.390] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    23.390]     Entry deleted from font path.
[    23.390] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    23.390]     Entry deleted from font path.
[    23.390] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    23.390]     Entry deleted from font path.
[    23.390] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    23.390] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    23.390] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.390] (II) Loader magic: 0xb77fd6a0
[    23.390] (II) Module ABI versions:
[    23.390]     X.Org ANSI C Emulation: 0.4
[    23.390]     X.Org Video Driver: 13.1
[    23.390]     X.Org XInput driver : 18.0
[    23.390]     X.Org Server Extension : 7.0
[    23.390] (II) config/udev: Adding drm device (/dev/dri/card0)
[    23.392] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 9, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[    23.392] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 9, Mem @ 0xfe800000/1048576
[    23.392] (II) Open ACPI successful (/var/run/acpid.socket)
[    23.392] Initializing built-in extension Generic Event Extension
[    23.392] Initializing built-in extension SHAPE
[    23.392] Initializing built-in extension MIT-SHM
[    23.392] Initializing built-in extension XInputExtension
[    23.392] Initializing built-in extension XTEST
[    23.392] Initializing built-in extension BIG-REQUESTS
[    23.392] Initializing built-in extension SYNC
[    23.392] Initializing built-in extension XKEYBOARD
[    23.392] Initializing built-in extension XC-MISC
[    23.392] Initializing built-in extension SECURITY
[    23.392] Initializing built-in extension XINERAMA
[    23.392] Initializing built-in extension XFIXES
[    23.392] Initializing built-in extension RENDER
[    23.392] Initializing built-in extension RANDR
[    23.392] Initializing built-in extension COMPOSITE
[    23.392] Initializing built-in extension DAMAGE
[    23.392] Initializing built-in extension MIT-SCREEN-SAVER
[    23.392] Initializing built-in extension DOUBLE-BUFFER
[    23.392] Initializing built-in extension RECORD
[    23.392] Initializing built-in extension DPMS
[    23.392] Initializing built-in extension X-Resource
[    23.392] Initializing built-in extension XVideo
[    23.392] Initializing built-in extension XVideo-MotionCompensation
[    23.392] Initializing built-in extension SELinux
[    23.393] Initializing built-in extension XFree86-VidModeExtension
[    23.393] Initializing built-in extension XFree86-DGA
[    23.393] Initializing built-in extension XFree86-DRI
[    23.393] Initializing built-in extension DRI2
[    23.393] (II) LoadModule: "glx"
[    23.445] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.445] (II) Module glx: vendor="X.Org Foundation"
[    23.445]     compiled for 1.13.3, module version = 1.0.0
[    23.445]     ABI class: X.Org Server Extension, version 7.0
[    23.445] (==) AIGLX enabled
[    23.445] Loading extension GLX
[    23.445] (==) Matched intel as autoconfigured driver 0
[    23.445] (==) Matched intel as autoconfigured driver 1
[    23.445] (==) Matched vesa as autoconfigured driver 2
[    23.445] (==) Matched modesetting as autoconfigured driver 3
[    23.445] (==) Matched fbdev as autoconfigured driver 4
[    23.445] (==) Assigned the driver to the xf86ConfigLayout
[    23.445] (II) LoadModule: "intel"
[    23.446] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.460] (II) Module intel: vendor="X.Org Foundation"
[    23.460]     compiled for 1.13.3, module version = 2.21.6
[    23.460]     Module class: X.Org Video Driver
[    23.460]     ABI class: X.Org Video Driver, version 13.1
[    23.460] (II) LoadModule: "vesa"
[    23.460] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.460] (II) Module vesa: vendor="X.Org Foundation"
[    23.460]     compiled for 1.12.99.902, module version = 2.3.2
[    23.460]     Module class: X.Org Video Driver
[    23.460]     ABI class: X.Org Video Driver, version 13.0
[    23.461] (II) LoadModule: "modesetting"
[    23.461] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    23.461] (II) Module modesetting: vendor="X.Org Foundation"
[    23.461]     compiled for 1.13.3, module version = 0.7.0
[    23.461]     Module class: X.Org Video Driver
[    23.461]     ABI class: X.Org Video Driver, version 13.1
[    23.461] (II) LoadModule: "fbdev"
[    23.461] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.461] (II) Module fbdev: vendor="X.Org Foundation"
[    23.461]     compiled for 1.12.99.902, module version = 0.4.3
[    23.461]     Module class: X.Org Video Driver
[    23.461]     ABI class: X.Org Video Driver, version 13.0
[    23.461] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
[    23.462] (II) VESA: driver for VESA chipsets: vesa
[    23.462] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    23.462] (II) FBDEV: driver for framebuffer: fbdev
[    23.462] (++) using VT number 7

[    23.473] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>)
[    23.473] (WW) Falling back to old probe method for vesa
[    23.473] (WW) Falling back to old probe method for modesetting
[    23.473] (WW) Falling back to old probe method for fbdev
[    23.473] (II) Loading sub module "fbdevhw"
[    23.473] (II) LoadModule: "fbdevhw"
[    23.473] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.473] (II) Module fbdevhw: vendor="X.Org Foundation"
[    23.473]     compiled for 1.13.3, module version = 0.0.2
[    23.473]     ABI class: X.Org Video Driver, version 13.1
[    23.474] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    23.474] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.474] (==) intel(0): RGB weight 888
[    23.474] (==) intel(0): Default visual is TrueColor
[    23.474] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    23.475] (--) intel(0): CPU: sse2, sse3, ssse3
[    23.475] (**) intel(0): Framebuffer tiled
[    23.475] (**) intel(0): Pixmaps tiled
[    23.475] (**) intel(0): "Tear free" disabled
[    23.475] (**) intel(0): Forcing per-crtc-pixmaps? no
[    23.475] (II) intel(0): Output LVDS1 has no monitor section
[    23.475] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[    23.512] (II) intel(0): Output VGA1 has no monitor section
[    23.640] (II) intel(0): Output HDMI1 has no monitor section
[    23.688] (II) intel(0): Output DP1 has no monitor section
[    23.736] (II) intel(0): Output DP2 has no monitor section
[    23.736] (II) intel(0): EDID for output LVDS1
[    23.736] (II) intel(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[    23.736] (II) intel(0): Year: 2009  Week: 0
[    23.736] (II) intel(0): EDID Version: 1.3
[    23.736] (II) intel(0): Digital Display Input
[    23.736] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    23.736] (II) intel(0): Gamma: 2.20
[    23.736] (II) intel(0): No DPMS capabilities specified
[    23.736] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    23.736] (II) intel(0): First detailed timing is preferred mode
[    23.736] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    23.736] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    23.736] (II) intel(0): Manufacturer's mask: 0
[    23.736] (II) intel(0): Supported detailed timing:
[    23.736] (II) intel(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    23.736] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    23.736] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    23.736] (II) intel(0): Supported detailed timing:
[    23.736] (II) intel(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    23.736] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    23.736] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    23.736] (II) intel(0):  SAMSUNG
[    23.736] (II) intel(0):  LTN156AT02P06
[    23.736] (II) intel(0): EDID (in hex):
[    23.736] (II) intel(0):     00ffffffffffff004ca3415400000000
[    23.736] (II) intel(0):     00130103902213780ac8959e57549226
[    23.736] (II) intel(0):     0f505400000001010101010101010101
[    23.736] (II) intel(0):     010101010101411c56a0500016303020
[    23.736] (II) intel(0):     250058c21000001a411c56a050001630
[    23.736] (II) intel(0):     3020250058c21000001a000000fe0053
[    23.736] (II) intel(0):     414d53554e470a2020202020000000fe
[    23.736] (II) intel(0):     004c544e3135364154303250303600c4
[    23.736] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    23.736] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    23.736] (II) intel(0): Printing probed modes for output LVDS1
[    23.736] (II) intel(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[    23.737] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    23.737] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    23.737] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    23.737] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    23.737] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    23.737] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    23.768] (II) intel(0): EDID for output VGA1
[    23.896] (II) intel(0): EDID for output HDMI1
[    23.944] (II) intel(0): EDID for output DP1
[    23.992] (II) intel(0): EDID for output DP2
[    23.992] (II) intel(0): Output LVDS1 connected
[    23.992] (II) intel(0): Output VGA1 disconnected
[    23.992] (II) intel(0): Output HDMI1 disconnected
[    23.992] (II) intel(0): Output DP1 disconnected
[    23.992] (II) intel(0): Output DP2 disconnected
[    23.992] (II) intel(0): Using exact sizes for initial modes
[    23.992] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    23.992] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    23.992] (==) intel(0): DPI set to (96, 96)
[    23.992] (II) Loading sub module "dri2"
[    23.992] (II) LoadModule: "dri2"
[    23.992] (II) Module "dri2" already built-in
[    23.992] (II) UnloadModule: "vesa"
[    23.992] (II) Unloading vesa
[    23.992] (II) UnloadModule: "modesetting"
[    23.992] (II) Unloading modesetting
[    23.992] (II) UnloadModule: "fbdev"
[    23.992] (II) Unloading fbdev
[    23.992] (II) UnloadSubModule: "fbdevhw"
[    23.992] (II) Unloading fbdevhw
[    23.992] (==) Depth 24 pixmap format is 32 bpp
[    23.992] (II) intel(0): SNA initialized with Broadwater/Crestline backend
[    23.992] (==) intel(0): Backing store disabled
[    23.992] (==) intel(0): Silken mouse enabled
[    23.993] (II) intel(0): HW Cursor enabled
[    23.993] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    23.994] (==) intel(0): DPMS enabled
[    23.994] (II) intel(0): Overlay video not supported on this hardware
[    23.994] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    23.994] (II) intel(0): [DRI2] Setup complete
[    23.994] (II) intel(0): [DRI2]   DRI driver: i965
[    23.994] (II) intel(0): direct rendering: DRI2 Enabled
[    23.994] (==) intel(0): hotplug detection: "enabled"
[    23.994] (--) RandR disabled
[    24.005] (II) SELinux: Disabled on system
[    24.106] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    24.106] (II) AIGLX: enabled GLX_INTEL_swap_event
[    24.106] (II) AIGLX: enabled GLX_ARB_create_context
[    24.106] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    24.106] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    24.106] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    24.106] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    24.106] (II) AIGLX: Loaded and initialized i965
[    24.106] (II) GLX: Initialized DRI2 GL provider for screen 0
[    24.107] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[    24.124] (II) intel(0): Setting screen physical size to 361 x 203
[    24.134] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    24.138] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    24.138] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.138] (II) LoadModule: "evdev"
[    24.138] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.150] (II) Module evdev: vendor="X.Org Foundation"
[    24.150]     compiled for 1.13.3, module version = 2.7.3
[    24.150]     Module class: X.Org XInput Driver
[    24.150]     ABI class: X.Org XInput driver, version 18.0
[    24.150] (II) Using input driver 'evdev' for 'Power Button'
[    24.150] (**) Power Button: always reports core events
[    24.150] (**) evdev: Power Button: Device: "/dev/input/event2"
[    24.150] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.150] (--) evdev: Power Button: Found keys
[    24.150] (II) evdev: Power Button: Configuring as keyboard
[    24.151] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    24.151] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.151] (**) Option "xkb_rules" "evdev"
[    24.151] (**) Option "xkb_model" "pc105"
[    24.151] (**) Option "xkb_layout" "us,ru"
[    24.151] (**) Option "xkb_variant" ","
[    24.151] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    24.155] (II) XKB: reuse xkmfile /var/lib/xkb/server-5BD46092C922CD443B4EABE4B26B5EFCDED629BD.xkm
[    24.156] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    24.156] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.156] (II) Using input driver 'evdev' for 'Video Bus'
[    24.156] (**) Video Bus: always reports core events
[    24.156] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    24.156] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    24.156] (--) evdev: Video Bus: Found keys
[    24.156] (II) evdev: Video Bus: Configuring as keyboard
[    24.156] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    24.156] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    24.156] (**) Option "xkb_rules" "evdev"
[    24.156] (**) Option "xkb_model" "pc105"
[    24.156] (**) Option "xkb_layout" "us,ru"
[    24.156] (**) Option "xkb_variant" ","
[    24.156] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    24.157] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    24.157] (II) No input driver specified, ignoring this device.
[    24.157] (II) This device may have been added with another device file.
[    24.157] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    24.157] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    24.157] (II) Using input driver 'evdev' for 'Sleep Button'
[    24.157] (**) Sleep Button: always reports core events
[    24.157] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[    24.157] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    24.157] (--) evdev: Sleep Button: Found keys
[    24.157] (II) evdev: Sleep Button: Configuring as keyboard
[    24.157] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    24.157] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id af
[    24.157] (**) Option "xkb_rules" "evdev"
[    24.157] (**) Option "xkb_model" "pc105"
[    24.157] (**) Option "xkb_layout" "us,ru"
[    24.157] (**) Option "xkb_variant" ","
[    24.157] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    24.158] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    24.158] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    24.158] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event7)
[    24.158] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    24.158] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[    24.158] (**) USB 2.0 Camera: always reports core events
[    24.158] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event7"
[    24.158] (--) evdev: USB 2.0 Camera: Vendor 0x13d3 Product 0x5130
[    24.158] (--) evdev: USB 2.0 Camera: Found keys
[    24.158] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[    24.158] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7/event7"
[    24.158] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 9)
[    24.158] (**) Option "xkb_rules" "evdev"
[    24.158] (**) Option "xkb_model" "pc105"
[    24.158] (**) Option "xkb_layout" "us,ru"
[    24.158] (**) Option "xkb_variant" ","
[    24.158] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    24.159] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[    24.159] (II) No input driver specified, ignoring this device.
[    24.159] (II) This device may have been added with another device file.
[    24.159] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[    24.159] (II) No input driver specified, ignoring this device.
[    24.159] (II) This device may have been added with another device file.
[    24.160] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event4)
[    24.160] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
[    24.160] (II) Using input driver 'evdev' for 'A4Tech USB Mouse'
[    24.160] (**) A4Tech USB Mouse: always reports core events
[    24.160] (**) evdev: A4Tech USB Mouse: Device: "/dev/input/event4"
[    24.160] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xa
[    24.160] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons
[    24.160] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s)
[    24.160] (--) evdev: A4Tech USB Mouse: Found relative axes
[    24.160] (--) evdev: A4Tech USB Mouse: Found x and y relative axes
[    24.160] (II) evdev: A4Tech USB Mouse: Configuring as mouse
[    24.160] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support
[    24.160] (**) evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
[    24.160] (**) evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.160] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4/event4"
[    24.160] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 10)
[    24.160] (II) evdev: A4Tech USB Mouse: initialized for relative axes.
[    24.160] (**) A4Tech USB Mouse: (accel) keeping acceleration scheme 1
[    24.160] (**) A4Tech USB Mouse: (accel) acceleration profile 0
[    24.160] (**) A4Tech USB Mouse: (accel) acceleration factor: 2.000
[    24.160] (**) A4Tech USB Mouse: (accel) acceleration threshold: 4
[    24.161] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse0)
[    24.161] (II) No input driver specified, ignoring this device.
[    24.161] (II) This device may have been added with another device file.
[    24.161] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event6)
[    24.161] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[    24.161] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[    24.161] (**) Asus Laptop extra buttons: always reports core events
[    24.161] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event6"
[    24.161] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[    24.161] (--) evdev: Asus Laptop extra buttons: Found keys
[    24.161] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[    24.161] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input6/event6"
[    24.161] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[    24.161] (**) Option "xkb_rules" "evdev"
[    24.161] (**) Option "xkb_model" "pc105"
[    24.161] (**) Option "xkb_layout" "us,ru"
[    24.161] (**) Option "xkb_variant" ","
[    24.161] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    24.162] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    24.162] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.162] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    24.162] (**) AT Translated Set 2 keyboard: always reports core events
[    24.162] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    24.162] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    24.162] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    24.162] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    24.162] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    24.162] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    24.162] (**) Option "xkb_rules" "evdev"
[    24.162] (**) Option "xkb_model" "pc105"
[    24.162] (**) Option "xkb_layout" "us,ru"
[    24.162] (**) Option "xkb_variant" ","
[    24.162] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    24.163] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[    24.163] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    24.163] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    24.163] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    24.163] (II) LoadModule: "synaptics"
[    24.163] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    24.163] (II) Module synaptics: vendor="X.Org Foundation"
[    24.163]     compiled for 1.13.1.901, module version = 1.6.2
[    24.163]     Module class: X.Org XInput Driver
[    24.163]     ABI class: X.Org XInput driver, version 18.0
[    24.163] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    24.163] (**) ETPS/2 Elantech Touchpad: always reports core events
[    24.163] (**) Option "Device" "/dev/input/event10"
[    24.168] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[    24.168] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088
[    24.168] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704
[    24.168] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    24.168] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    24.168] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    24.168] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    24.168] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    24.168] (**) ETPS/2 Elantech Touchpad: always reports core events
[    24.180] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[    24.180] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[    24.180] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    24.180] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    24.180] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.154
[    24.180] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    24.180] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    24.180] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    24.180] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    24.180] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    24.180] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    24.180] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    83.590] (II) intel(0): EDID vendor "SEC", prod id 21569
[    83.590] (II) intel(0): Printing DDC gathered Modelines:
[    83.590] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[    84.837] (II) intel(0): EDID vendor "SEC", prod id 21569
[    84.837] (II) intel(0): Printing DDC gathered Modelines:
[    84.837] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[    86.095] (II) intel(0): EDID vendor "SEC", prod id 21569
[    86.095] (II) intel(0): Printing DDC gathered Modelines:
[    86.095] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[    86.615] (II) XKB: reuse xkmfile /var/lib/xkb/server-802A24DB8FB68929C843CF2DC4032F03A158FC7F.xkm
[    86.683] (II) XKB: reuse xkmfile /var/lib/xkb/server-A9476F6BEB0E4CD0BA81157AD508CC62DE3F5A81.xkm
[    89.532] (II) intel(0): EDID vendor "SEC", prod id 21569
[    89.532] (II) intel(0): Printing DDC gathered Modelines:
[    89.532] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[    90.260] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[    90.280] (II) intel(0): switch to mode 1024x768 on crtc 4 (pipe 1)
[    91.910] (II) XKB: reuse xkmfile /var/lib/xkb/server-A9476F6BEB0E4CD0BA81157AD508CC62DE3F5A81.xkm
[    91.917] (II) XKB: reuse xkmfile /var/lib/xkb/server-A9476F6BEB0E4CD0BA81157AD508CC62DE3F5A81.xkm
[    91.923] (II) XKB: reuse xkmfile /var/lib/xkb/server-A9476F6BEB0E4CD0BA81157AD508CC62DE3F5A81.xkm
[    91.929] (II) XKB: reuse xkmfile /var/lib/xkb/server-A9476F6BEB0E4CD0BA81157AD508CC62DE3F5A81.xkm
[    91.935] (II) XKB: reuse xkmfile /var/lib/xkb/server-A9476F6BEB0E4CD0BA81157AD508CC62DE3F5A81.xkm
[    91.941] (II) XKB: reuse xkmfile /var/lib/xkb/server-A9476F6BEB0E4CD0BA81157AD508CC62DE3F5A81.xkm
[    91.947] (II) XKB: reuse xkmfile /var/lib/xkb/server-A9476F6BEB0E4CD0BA81157AD508CC62DE3F5A81.xkm
[    91.955] (II) XKB: reuse xkmfile /var/lib/xkb/server-A9476F6BEB0E4CD0BA81157AD508CC62DE3F5A81.xkm
[    92.622] (II) intel(0): EDID vendor "SEC", prod id 21569
[    92.622] (II) intel(0): Printing DDC gathered Modelines:
[    92.622] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (47.4 kHz eP)

12

В терминале Xorg -configure выдаёт:
Fatal server error:
Server is already active for display 0
    If this server is no longer running, remove /tmp/.X0-lock
    and start again.

(EE)
Please consult the The X.Org Foundation support
     at http://wiki.x.org
for help.
(EE)

13

makkavei, длинные сообщения убирайте под спойлер, чтобы другим было удобнее листать тему.

Linux Mint 19.3 Mate Edition
Windows 7

14

Простите, за безграмотность. Знал, что я малограмотный юзер, но не думал, что будет стыдно за Русский язык. Разрешение экрана побороть не в силах.Спасибо всем!!!

Ну так запускайте конфигуратор при незапущеных иксах.