Настоятельно просим вас при общении соблюдать Правила форума и законы РФ. Наша тематика вне политики, поэтому воздержитесь от обсуждения ситуации на Украине и связанных с ней событий, независимо от того, какую сторону вы поддерживаете.
Также напоминаем, что наш форум находится в доменной зоне .ru, физически расположен на российских серверах и мы соблюдаем действующее законодательство России. Любые сообщения о политике будут удаляться.
Linux Forum → openSUSE и SUSE Linux Enterprise → Не работает.... подсветка экрана! (Fglrx)
dezhurant,
# yast2 sysconfig set DEFAULT_WM="icewm"
Что должно было измениться? В обычном режиме так же чернота, в безопасном - icewm...
dezhurant,
Да, возможно была проблема вов ключенных эффектах - не подтвердилось.
Вернуть назад kde:
# yast2 sysconfig set DEFAULT_WM="kde"Уже... В безопасном режиме... 
Здравствуйте!
Скачал amd catalyst 13.11 beta 6, скомпилировал и иксы выдают черный экран. Установка проходит без ошибок.
В failsave удается выйти на консоль.
а инсталлятор спрашивает про создание файла конфигурации?
(в том смысле что желаете ли создать конфигурационный файл)
а инсталлятор спрашивает про создание файла конфигурации?
У меня - нет. Делаю aticonfig --initial -f после инсталляции.
aliaksei1818, вечером попробую. Спасибо.
У меня - нет. Делаю aticonfig --initial -f после инсталляции.
тогда может быть есть смысл создать xorg.conf командой Xorg -configure
отредактировать получившийся файл xorg.conf.new и скопировать его в /etc/X11 как xorg.conf
я так делал, когда руками драйвер nVidia устанавливал
(всё делать как root)
Ещё плюс способы... Вечером буду пытаться. Вчера было ощущение безысходного тупика, тем более, что у людей-то работает...
я так делал, когда руками драйвер nVidia устанавливал
Инсталятор nvidia с помощью командной строки работает слюбым ядром, главное прописать это явно в параметрах.
А вот ATI только в девятой бете начинает дружить с 3.12
Termo пишет:я так делал, когда руками драйвер nVidia устанавливал
Инсталятор nvidia с помощью командной строки работает слюбым ядром, главное прописать это явно в параметрах.
А вот ATI только в девятой бете начинает дружить с 3.12
так автор пишет, что ошибок не было
значит драйвер установился
так автор пишет, что ошибок не было
значит драйвер установился
Да, именно девятая бета. Кстати, шестая тоже ошибок не выдавала при установке.
Termo пишет:так автор пишет, что ошибок не было
значит драйвер установилсяДа, именно девятая бета. Кстати, шестая тоже ошибок не выдавала при установке.
ну вот с этим драйвером и сделай Xorg -configure
Нет, здесь определённо что-то не так. Сейчас: снёс всё, установил голую систему, установил ...-devel-ы, build и т.д., что нужно для fglrx, ставлю в один клик fglrx отсюда: http://geeko.ioda.net/mirror/amd-fglrx- … SUSE_13.1/ , влетает, как к себе домой. Делаю aticonfig --initial -f, делаю копию /var/log.Xorg.0.log, чтобы, если что, тут показать, перезагружаюсь - нате, пожалуйста... Опять чёрный экран в обычном режиме... Ну, всё точно так же, как раньше, не стану переписывать...
cat /var/log/Xorg.0.log
[ 157.438]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 157.438]
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[ 157.438] X Protocol Version 11, Revision 0
[ 157.438] Build Operating System: openSUSE SUSE LINUX
[ 157.438] Current Operating System: Linux linux-14q8.site 3.11.6-4-desktop #1 SMP PREEMPT Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) x86_64
[ 157.438] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.6-4-desktop root=UUID=f0b0f790-3ded-437c-a4d1-6ecf70a30c43 splash=silent quiet showopts
[ 157.438] Build Date: 06 November 2013 10:07:38AM
[ 157.438]
[ 157.438] Current version of pixman: 0.30.2
[ 157.438] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 157.438] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 157.438] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 26 12:57:19 2013
[ 157.439] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 157.439] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 157.439] (==) No Layout section. Using the first Screen section.
[ 157.440] (==) No screen section available. Using defaults.
[ 157.440] (**) |-->Screen "Default Screen Section" (0)
[ 157.440] (**) | |-->Monitor "<default monitor>"
[ 157.440] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 157.440] (==) Automatically adding devices
[ 157.440] (==) Automatically enabling devices
[ 157.440] (==) Automatically adding GPU devices
[ 157.440] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 157.440] Entry deleted from font path.
[ 157.440] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 157.440] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[ 157.440] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 157.440] (II) Loader magic: 0x803c20
[ 157.440] (II) Module ABI versions:
[ 157.440] X.Org ANSI C Emulation: 0.4
[ 157.440] X.Org Video Driver: 14.1
[ 157.440] X.Org XInput driver : 19.1
[ 157.440] X.Org Server Extension : 7.0
[ 157.441] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 157.443] (--) PCI:*(0:1:0:0) 1002:68e4:1043:1c92 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 157.443] Initializing built-in extension Generic Event Extension
[ 157.443] Initializing built-in extension SHAPE
[ 157.443] Initializing built-in extension MIT-SHM
[ 157.443] Initializing built-in extension XInputExtension
[ 157.443] Initializing built-in extension XTEST
[ 157.443] Initializing built-in extension BIG-REQUESTS
[ 157.443] Initializing built-in extension SYNC
[ 157.443] Initializing built-in extension XKEYBOARD
[ 157.443] Initializing built-in extension XC-MISC
[ 157.443] Initializing built-in extension SECURITY
[ 157.443] Initializing built-in extension XINERAMA
[ 157.443] Initializing built-in extension XFIXES
[ 157.443] Initializing built-in extension RENDER
[ 157.443] Initializing built-in extension RANDR
[ 157.443] Initializing built-in extension COMPOSITE
[ 157.443] Initializing built-in extension DAMAGE
[ 157.443] Initializing built-in extension MIT-SCREEN-SAVER
[ 157.443] Initializing built-in extension DOUBLE-BUFFER
[ 157.443] Initializing built-in extension RECORD
[ 157.443] Initializing built-in extension DPMS
[ 157.443] Initializing built-in extension X-Resource
[ 157.443] Initializing built-in extension XVideo
[ 157.443] Initializing built-in extension XVideo-MotionCompensation
[ 157.443] Initializing built-in extension XFree86-VidModeExtension
[ 157.443] Initializing built-in extension XFree86-DGA
[ 157.443] Initializing built-in extension XFree86-DRI
[ 157.443] Initializing built-in extension DRI2
[ 157.443] (II) "glx" will be loaded by default.
[ 157.444] (II) LoadModule: "dri2"
[ 157.444] (II) Module "dri2" already built-in
[ 157.444] (II) LoadModule: "glamoregl"
[ 157.444] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 157.446] (II) Module glamoregl: vendor="X.Org Foundation"
[ 157.446] compiled for 1.14.3, module version = 0.5.1
[ 157.446] ABI class: X.Org ANSI C Emulation, version 0.4
[ 157.446] (II) LoadModule: "glx"
[ 157.446] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 157.446] (II) Module glx: vendor="X.Org Foundation"
[ 157.446] compiled for 1.14.3.901, module version = 1.0.0
[ 157.446] ABI class: X.Org Server Extension, version 7.0
[ 157.446] (==) AIGLX enabled
[ 157.446] Loading extension GLX
[ 157.446] (==) Matched fglrx as autoconfigured driver 0
[ 157.446] (==) Matched ati as autoconfigured driver 1
[ 157.446] (==) Matched fglrx as autoconfigured driver 2
[ 157.446] (==) Matched ati as autoconfigured driver 3
[ 157.446] (==) Matched modesetting as autoconfigured driver 4
[ 157.446] (==) Matched fbdev as autoconfigured driver 5
[ 157.446] (==) Matched vesa as autoconfigured driver 6
[ 157.446] (==) Assigned the driver to the xf86ConfigLayout
[ 157.446] (II) LoadModule: "fglrx"
[ 157.447] (WW) Warning, couldn't open module fglrx
[ 157.447] (II) UnloadModule: "fglrx"
[ 157.447] (II) Unloading fglrx
[ 157.447] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 157.447] (II) LoadModule: "ati"
[ 157.447] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[ 157.447] (II) Module ati: vendor="X.Org Foundation"
[ 157.447] compiled for 1.14.3, module version = 7.2.0
[ 157.447] Module class: X.Org Video Driver
[ 157.447] ABI class: X.Org Video Driver, version 14.1
[ 157.447] (II) LoadModule: "radeon"
[ 157.447] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 157.448] (II) Module radeon: vendor="X.Org Foundation"
[ 157.448] compiled for 1.14.3, module version = 7.2.0
[ 157.448] Module class: X.Org Video Driver
[ 157.448] ABI class: X.Org Video Driver, version 14.1
[ 157.448] (II) LoadModule: "modesetting"
[ 157.448] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 157.448] (II) Module modesetting: vendor="X.Org Foundation"
[ 157.448] compiled for 1.14.3, module version = 0.8.0
[ 157.448] Module class: X.Org Video Driver
[ 157.448] ABI class: X.Org Video Driver, version 14.1
[ 157.448] (II) LoadModule: "fbdev"
[ 157.448] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 157.449] (II) Module fbdev: vendor="X.Org Foundation"
[ 157.449] compiled for 1.14.3, module version = 0.4.3
[ 157.449] Module class: X.Org Video Driver
[ 157.449] ABI class: X.Org Video Driver, version 14.1
[ 157.449] (II) LoadModule: "vesa"
[ 157.449] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 157.449] (II) Module vesa: vendor="X.Org Foundation"
[ 157.449] compiled for 1.14.3, module version = 2.3.3
[ 157.449] Module class: X.Org Video Driver
[ 157.449] ABI class: X.Org Video Driver, version 14.1
[ 157.449] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI
[ 157.453] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 157.453] (II) FBDEV: driver for framebuffer: fbdev
[ 157.453] (II) VESA: driver for VESA chipsets: vesa
[ 157.453] (++) using VT number 7
[ 157.457] (II) [KMS] Kernel modesetting enabled.
[ 157.457] (WW) Falling back to old probe method for modesetting
[ 157.457] (WW) Falling back to old probe method for fbdev
[ 157.457] (II) Loading sub module "fbdevhw"
[ 157.457] (II) LoadModule: "fbdevhw"
[ 157.457] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 157.457] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 157.457] compiled for 1.14.3.901, module version = 0.0.2
[ 157.457] ABI class: X.Org Video Driver, version 14.1
[ 157.457] (WW) Falling back to old probe method for vesa
[ 157.457] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 157.457] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 157.458] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 157.458] (==) RADEON(0): Default visual is TrueColor
[ 157.458] (==) RADEON(0): RGB weight 888
[ 157.458] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 157.458] (--) RADEON(0): Chipset: "ATI Mobility Radeon Graphics" (ChipID = 0x68e4)
[ 157.458] (II) Loading sub module "dri2"
[ 157.458] (II) LoadModule: "dri2"
[ 157.458] (II) Module "dri2" already built-in
[ 157.458] (II) Loading sub module "exa"
[ 157.458] (II) LoadModule: "exa"
[ 157.458] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 157.458] (II) Module exa: vendor="X.Org Foundation"
[ 157.458] compiled for 1.14.3.901, module version = 2.6.0
[ 157.459] ABI class: X.Org Video Driver, version 14.1
[ 157.459] (II) RADEON(0): KMS Color Tiling: enabled
[ 157.459] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 157.459] (II) RADEON(0): KMS Pageflipping: enabled
[ 157.459] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 157.461] (II) RADEON(0): Output LVDS has no monitor section
[ 157.463] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 157.477] (II) RADEON(0): Output VGA-0 has no monitor section
[ 157.479] (II) RADEON(0): EDID for output LVDS
[ 157.479] (II) RADEON(0): Printing probed modes for output LVDS
[ 157.479] (II) RADEON(0): Modeline "1366x768"x60.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 157.479] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 157.479] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 157.479] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 157.479] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 157.479] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 157.479] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 157.479] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 157.482] (II) RADEON(0): EDID for output HDMI-0
[ 157.496] (II) RADEON(0): EDID for output VGA-0
[ 157.496] (II) RADEON(0): Output LVDS connected
[ 157.496] (II) RADEON(0): Output HDMI-0 disconnected
[ 157.496] (II) RADEON(0): Output VGA-0 disconnected
[ 157.496] (II) RADEON(0): Using exact sizes for initial modes
[ 157.496] (II) RADEON(0): Output LVDS using initial mode 1366x768
[ 157.496] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 157.496] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: s:40000000 visible:3fba0000
[ 157.496] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 157.496] (==) RADEON(0): DPI set to (96, 96)
[ 157.496] (II) Loading sub module "fb"
[ 157.496] (II) LoadModule: "fb"
[ 157.497] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 157.497] (II) Module fb: vendor="X.Org Foundation"
[ 157.497] compiled for 1.14.3.901, module version = 1.0.0
[ 157.497] ABI class: X.Org ANSI C Emulation, version 0.4
[ 157.497] (II) Loading sub module "ramdac"
[ 157.497] (II) LoadModule: "ramdac"
[ 157.497] (II) Module "ramdac" already built-in
[ 157.497] (II) UnloadModule: "modesetting"
[ 157.497] (II) Unloading modesetting
[ 157.497] (II) UnloadModule: "fbdev"
[ 157.497] (II) Unloading fbdev
[ 157.497] (II) UnloadSubModule: "fbdevhw"
[ 157.498] (II) Unloading fbdevhw
[ 157.498] (II) UnloadModule: "vesa"
[ 157.498] (II) Unloading vesa
[ 157.498] (--) Depth 24 pixmap format is 32 bpp
[ 157.498] (II) RADEON(0): [DRI2] Setup complete
[ 157.498] (II) RADEON(0): [DRI2] DRI driver: r600
[ 157.498] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 157.498] (II) RADEON(0): Front buffer size: 4128K
[ 157.498] (II) RADEON(0): VRAM usage limit set to 935913K
[ 157.498] (==) RADEON(0): Backing store disabled
[ 157.498] (II) RADEON(0): Direct rendering enabled
[ 157.498] (II) EXA(0): Driver allocated offscreen pixmaps
[ 157.498] (II) EXA(0): Driver registered support for the following operations:
[ 157.498] (II) Solid
[ 157.498] (II) Copy
[ 157.498] (II) Composite (RENDER acceleration)
[ 157.498] (II) UploadToScreen
[ 157.498] (II) DownloadFromScreen
[ 157.498] (II) RADEON(0): Acceleration enabled
[ 157.498] (==) RADEON(0): DPMS enabled
[ 157.498] (==) RADEON(0): Silken mouse enabled
[ 157.499] (II) RADEON(0): Set up textured video
[ 157.499] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 157.499] (II) RADEON(0): [XvMC] Extension initialized.
[ 157.499] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 157.499] (--) RandR disabled
[ 157.546] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 157.547] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 157.547] (II) AIGLX: enabled GLX_ARB_create_context
[ 157.547] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 157.547] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 157.547] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 157.547] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 157.547] (II) AIGLX: Loaded and initialized r600
[ 157.547] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 157.548] (II) RADEON(0): Setting screen physical size to 361 x 203
[ 157.596] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 157.596] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 157.596] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 157.596] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 157.596] (II) LoadModule: "evdev"
[ 157.597] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 157.597] (II) Module evdev: vendor="X.Org Foundation"
[ 157.597] compiled for 1.14.3, module version = 2.8.2
[ 157.597] Module class: X.Org XInput Driver
[ 157.597] ABI class: X.Org XInput driver, version 19.1
[ 157.597] (II) Using input driver 'evdev' for 'Power Button'
[ 157.597] (**) Power Button: always reports core events
[ 157.598] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 157.598] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 157.598] (--) evdev: Power Button: Found keys
[ 157.598] (II) evdev: Power Button: Configuring as keyboard
[ 157.598] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 157.598] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 157.598] (**) Option "xkb_rules" "evdev"
[ 157.598] (**) Option "xkb_model" "pc104"
[ 157.598] (**) Option "xkb_layout" "us,ru"
[ 157.598] (**) Option "xkb_variant" ",winkeys"
[ 157.598] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 157.654] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 157.654] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 157.654] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 157.654] (**) Video Bus: Applying InputClass "LocalKeyboard"
[ 157.654] (II) Using input driver 'evdev' for 'Video Bus'
[ 157.654] (**) Video Bus: always reports core events
[ 157.654] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 157.654] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 157.654] (--) evdev: Video Bus: Found keys
[ 157.654] (II) evdev: Video Bus: Configuring as keyboard
[ 157.654] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6/event6"
[ 157.654] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 157.654] (**) Option "xkb_rules" "evdev"
[ 157.654] (**) Option "xkb_model" "pc104"
[ 157.654] (**) Option "xkb_layout" "us,ru"
[ 157.654] (**) Option "xkb_variant" ",winkeys"
[ 157.654] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 157.655] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 157.655] (II) No input driver specified, ignoring this device.
[ 157.655] (II) This device may have been added with another device file.
[ 157.656] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 157.656] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 157.656] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 157.656] (**) Sleep Button: Applying InputClass "LocalKeyboard"
[ 157.656] (II) Using input driver 'evdev' for 'Sleep Button'
[ 157.656] (**) Sleep Button: always reports core events
[ 157.656] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 157.656] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 157.656] (--) evdev: Sleep Button: Found keys
[ 157.656] (II) evdev: Sleep Button: Configuring as keyboard
[ 157.656] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 157.656] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 
[ 157.656] (**) Option "xkb_rules" "evdev"
[ 157.656] (**) Option "xkb_model" "pc104"
[ 157.656] (**) Option "xkb_layout" "us,ru"
[ 157.656] (**) Option "xkb_variant" ",winkeys"
[ 157.656] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 157.657] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 157.657] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[ 157.657] (II) No input driver specified, ignoring this device.
[ 157.657] (II) This device may have been added with another device file.
[ 157.658] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event10)
[ 157.658] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 157.658] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 157.658] (**) USB 2.0 Camera: Applying InputClass "LocalKeyboard"
[ 157.658] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 157.658] (**) USB 2.0 Camera: always reports core events
[ 157.658] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event10"
[ 157.658] (--) evdev: USB 2.0 Camera: Vendor 0x13d3 Product 0x5130
[ 157.658] (--) evdev: USB 2.0 Camera: Found keys
[ 157.658] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[ 157.658] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input10/event10"
[ 157.658] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 9)
[ 157.658] (**) Option "xkb_rules" "evdev"
[ 157.658] (**) Option "xkb_model" "pc104"
[ 157.658] (**) Option "xkb_layout" "us,ru"
[ 157.658] (**) Option "xkb_variant" ",winkeys"
[ 157.658] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 157.659] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 157.659] (II) No input driver specified, ignoring this device.
[ 157.659] (II) This device may have been added with another device file.
[ 157.660] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event5)
[ 157.660] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 157.660] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 157.660] (**) Asus Laptop extra buttons: Applying InputClass "LocalKeyboard"
[ 157.660] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 157.660] (**) Asus Laptop extra buttons: always reports core events
[ 157.660] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event5"
[ 157.660] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[ 157.660] (--) evdev: Asus Laptop extra buttons: Found keys
[ 157.660] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[ 157.660] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input5/event5"
[ 157.660] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 10)
[ 157.660] (**) Option "xkb_rules" "evdev"
[ 157.660] (**) Option "xkb_model" "pc104"
[ 157.660] (**) Option "xkb_layout" "us,ru"
[ 157.660] (**) Option "xkb_variant" ",winkeys"
[ 157.660] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 157.661] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 157.661] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 157.661] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 157.661] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[ 157.661] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 157.661] (**) AT Translated Set 2 keyboard: always reports core events
[ 157.661] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 157.661] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 157.661] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 157.661] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 157.661] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 157.661] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 157.661] (**) Option "xkb_rules" "evdev"
[ 157.661] (**) Option "xkb_model" "pc104"
[ 157.661] (**) Option "xkb_layout" "us,ru"
[ 157.661] (**) Option "xkb_variant" ",winkeys"
[ 157.661] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 157.662] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event1)
[ 157.662] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 157.662] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 157.662] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 157.662] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 157.662] (II) LoadModule: "synaptics"
[ 157.663] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 157.663] (II) Module synaptics: vendor="X.Org Foundation"
[ 157.663] compiled for 1.14.3, module version = 1.7.1
[ 157.663] Module class: X.Org XInput Driver
[ 157.663] ABI class: X.Org XInput driver, version 19.1
[ 157.663] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 157.663] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 157.663] (**) Option "Device" "/dev/input/event1"
[ 157.694] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 157.694] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1280 (res 0)
[ 157.694] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704 (res 0)
[ 157.694] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 157.694] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 157.694] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 157.694] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 157.694] (**) Option "HorizScrollDelta" "0"
[ 157.694] (**) Option "TapButton1" "1"
[ 157.694] (**) Option "TapButton2" "3"
[ 157.694] (**) Option "TapButton3" "2"
[ 157.694] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 157.694] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 157.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input1/event1"
[ 157.712] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 157.712] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 157.712] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 157.712] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.137
[ 157.712] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 157.712] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 157.712] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 157.712] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 157.713] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 157.713] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 157.713] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 157.713] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 157.713] (II) No input driver specified, ignoring this device.
[ 157.714] (II) This device may have been added with another device file.
И ещё смутило вот что:
showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset [b]x11failsafe[/b] Почему безопасный режим-то? Может, у меня дистрибутив кривой? (Или руки... 
) У людей-то работает...
PS:
[ 20.957]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 20.957]
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[ 20.957] X Protocol Version 11, Revision 0
[ 20.957] Build Operating System: openSUSE SUSE LINUX
[ 20.957] Current Operating System: Linux linux-14q8 3.11.6-4-desktop #1 SMP PREEMPT Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) x86_64
[ 20.957] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.6-4-desktop root=UUID=f0b0f790-3ded-437c-a4d1-6ecf70a30c43 splash=silent quiet showopts
[ 20.957] Build Date: 06 November 2013 10:07:38AM
[ 20.957]
[ 20.957] Current version of pixman: 0.30.2
[ 20.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.957] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.957] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 26 13:28:09 2013
[ 20.957] (==) Using config file: "/etc/X11/xorg.conf"
[ 20.957] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.957] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.984] (==) ServerLayout "aticonfig Layout"
[ 20.984] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 20.984] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 20.984] (**) | |-->Device "aticonfig-Device[0]-0"
[ 20.984] (==) Automatically adding devices
[ 20.984] (==) Automatically enabling devices
[ 20.984] (==) Automatically adding GPU devices
[ 20.995] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 20.995] Entry deleted from font path.
[ 20.995] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 20.995] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[ 20.995] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.995] (II) Loader magic: 0x803c20
[ 20.995] (II) Module ABI versions:
[ 20.995] X.Org ANSI C Emulation: 0.4
[ 20.995] X.Org Video Driver: 14.1
[ 20.995] X.Org XInput driver : 19.1
[ 20.995] X.Org Server Extension : 7.0
[ 20.997] (--) PCI:*(0:1:0:0) 1002:68e4:1043:1c92 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 20.998] Initializing built-in extension Generic Event Extension
[ 20.998] Initializing built-in extension SHAPE
[ 20.998] Initializing built-in extension MIT-SHM
[ 20.998] Initializing built-in extension XInputExtension
[ 20.998] Initializing built-in extension XTEST
[ 20.998] Initializing built-in extension BIG-REQUESTS
[ 20.998] Initializing built-in extension SYNC
[ 20.998] Initializing built-in extension XKEYBOARD
[ 20.998] Initializing built-in extension XC-MISC
[ 20.998] Initializing built-in extension SECURITY
[ 20.998] Initializing built-in extension XINERAMA
[ 20.998] Initializing built-in extension XFIXES
[ 20.998] Initializing built-in extension RENDER
[ 20.998] Initializing built-in extension RANDR
[ 20.998] Initializing built-in extension COMPOSITE
[ 20.998] Initializing built-in extension DAMAGE
[ 20.998] Initializing built-in extension MIT-SCREEN-SAVER
[ 20.998] Initializing built-in extension DOUBLE-BUFFER
[ 20.998] Initializing built-in extension RECORD
[ 20.998] Initializing built-in extension DPMS
[ 20.998] Initializing built-in extension X-Resource
[ 20.998] Initializing built-in extension XVideo
[ 20.998] Initializing built-in extension XVideo-MotionCompensation
[ 20.998] Initializing built-in extension XFree86-VidModeExtension
[ 20.998] Initializing built-in extension XFree86-DGA
[ 20.998] Initializing built-in extension XFree86-DRI
[ 20.998] Initializing built-in extension DRI2
[ 20.998] (II) "glx" will be loaded by default.
[ 20.998] (II) LoadModule: "glx"
[ 21.732] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so
[ 22.138] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 22.138] compiled for 6.9.0, module version = 1.0.0
[ 22.138] Loading extension GLX
[ 22.138] (II) LoadModule: "fglrx"
[ 22.663] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 23.903] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 23.903] compiled for 1.4.99.906, module version = 13.25.5
[ 23.903] Module class: X.Org Video Driver
[ 23.903] (II) Loading sub module "fglrxdrm"
[ 23.903] (II) LoadModule: "fglrxdrm"
[ 23.903] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 23.935] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 23.935] compiled for 1.4.99.906, module version = 13.25.5
[ 23.935] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[ 23.935] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.25.18
[ 23.935] (II) AMD Proprietary Linux Driver Build Date: Nov 22 2013 09:54:24
[ 23.935] (++) using VT number 7
[ 23.935] (WW) Falling back to old probe method for fglrx
[ 24.035] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 24.040] ukiDynamicMajor: found major device number 250
[ 24.040] ukiDynamicMajor: found major device number 250
[ 24.040] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.040] ukiOpenDevice: node name is /dev/ati/card0
[ 24.040] ukiOpenDevice: open result is 9, (OK)
[ 24.202] ukiOpenByBusid: ukiOpenMinor returns 9
[ 24.202] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.375] (--) Chipset Supported AMD Graphics Processor (0x68E4) found
[ 24.396] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 24.409] (II) fglrx(0): pEnt->device->identifier=0x1f48bf0
[ 24.409] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 24.409] (II) Loading sub module "vgahw"
[ 24.409] (II) LoadModule: "vgahw"
[ 24.410] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 24.467] (II) Module vgahw: vendor="X.Org Foundation"
[ 24.467] compiled for 1.14.3.901, module version = 0.1.0
[ 24.467] ABI class: X.Org Video Driver, version 14.1
[ 24.467] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 24.467] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.467] (==) fglrx(0): Default visual is TrueColor
[ 24.468] (**) fglrx(0): Option "DPMS" "true"
[ 24.468] (==) fglrx(0): RGB weight 888
[ 24.468] (II) fglrx(0): Using 8 bits per RGB
[ 24.468] (==) fglrx(0): Buffer Tiling is ON
[ 24.468] (II) Loading sub module "fglrxdrm"
[ 24.468] (II) LoadModule: "fglrxdrm"
[ 24.468] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 24.468] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 24.468] compiled for 1.4.99.906, module version = 13.25.5
[ 24.470] ukiDynamicMajor: found major device number 250
[ 24.471] ukiDynamicMajor: found major device number 250
[ 24.471] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.471] ukiOpenDevice: node name is /dev/ati/card0
[ 24.471] ukiOpenDevice: open result is 11, (OK)
[ 24.471] ukiOpenByBusid: ukiOpenMinor returns 11
[ 24.471] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.471] (**) fglrx(0): NoAccel = NO
[ 24.471] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 24.471] (--) fglrx(0): Chipset: "AMD Radeon HD 6300M Series" (Chipset = 0x68e4)
[ 24.471] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1c92)
[ 24.471] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 24.471] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 24.471] (--) fglrx(0): MMIO registers at 0xd0020000
[ 24.471] (--) fglrx(0): I/O port at 0x0000d000
[ 24.471] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 24.503] (II) fglrx(0): AC Adapter is used
[ 24.524] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 24.529] (II) Loading sub module "vbe"
[ 24.529] (II) LoadModule: "vbe"
[ 24.530] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 24.552] (II) Module vbe: vendor="X.Org Foundation"
[ 24.552] compiled for 1.14.3.901, module version = 1.1.0
[ 24.552] ABI class: X.Org Video Driver, version 14.1
[ 24.553] (II) fglrx(0): VESA BIOS detected
[ 24.553] (II) fglrx(0): VESA VBE Version 3.0
[ 24.553] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 24.553] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 24.553] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 24.553] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 24.553] (II) fglrx(0): VESA VBE OEM Product: PARK
[ 24.553] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 24.553] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 24.553] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 24.553] (II) fglrx(0): PCIE card detected
[ 24.553] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 24.553] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 24.553] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 24.554] (II) fglrx(0): RandR 1.2 support is enabled!
[ 24.554] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 24.554] (==) fglrx(0): Center Mode is disabled
[ 24.554] (II) Loading sub module "fb"
[ 24.554] (II) LoadModule: "fb"
[ 24.554] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 24.554] (II) Module fb: vendor="X.Org Foundation"
[ 24.554] compiled for 1.14.3.901, module version = 1.0.0
[ 24.554] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.554] (II) Loading sub module "ddc"
[ 24.554] (II) LoadModule: "ddc"
[ 24.554] (II) Module "ddc" already built-in
[ 27.269] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 27.269] (II) fglrx(0): Output DFP1 has no monitor section
[ 27.269] (II) fglrx(0): Output CRT1 has no monitor section
[ 27.269] (II) Loading sub module "ddc"
[ 27.269] (II) LoadModule: "ddc"
[ 27.269] (II) Module "ddc" already built-in
[ 27.269] (II) fglrx(0): Connected Display0: LVDS
[ 27.286] (II) fglrx(0): Display0 EDID data ---------------------------
[ 27.286] (II) fglrx(0): Manufacturer: AUO Model: 26ec Serial#: 0
[ 27.286] (II) fglrx(0): Year: 2009 Week: 1
[ 27.286] (II) fglrx(0): EDID Version: 1.3
[ 27.286] (II) fglrx(0): Digital Display Input
[ 27.286] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 27.286] (II) fglrx(0): Gamma: 2.20
[ 27.286] (II) fglrx(0): No DPMS capabilities specified
[ 27.286] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.286] (II) fglrx(0): First detailed timing is preferred mode
[ 27.286] (II) fglrx(0): redX: 0.577 redY: 0.333 greenX: 0.333 greenY: 0.554
[ 27.286] (II) fglrx(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
[ 27.286] (II) fglrx(0): Manufacturer's mask: 0
[ 27.286] (II) fglrx(0): Supported detailed timing:
[ 27.286] (II) fglrx(0): clock: 71.8 MHz Image Size: 344 x 193 mm
[ 27.286] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 27.286] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 784 v_border: 0
[ 27.286] (II) fglrx(0): Unknown vendor-specific block f
[ 27.286] (II) fglrx(0): AUO
[ 27.286] (II) fglrx(0): B156XW02 V6
[ 27.286] (II) fglrx(0): EDID (in hex):
[ 27.286] (II) fglrx(0): 00ffffffffffff0006afec2600000000
[ 27.286] (II) fglrx(0): 01130103802213780ad7759355558d29
[ 27.286] (II) fglrx(0): 24505400000001010101010101010101
[ 27.286] (II) fglrx(0): 0101010101010c1c56a0500010303020
[ 27.286] (II) fglrx(0): 360058c1100000180000000f00000000
[ 27.286] (II) fglrx(0): 00000000000000000020000000fe0041
[ 27.286] (II) fglrx(0): 554f0a202020202020202020000000fe
[ 27.286] (II) fglrx(0): 004231353658573032205636200a0065
[ 27.286] (II) fglrx(0): End of Display0 EDID data --------------------
[ 27.287] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 27.287] (II) fglrx(0): EDID for output LVDS
[ 27.287] (II) fglrx(0): Manufacturer: AUO Model: 26ec Serial#: 0
[ 27.287] (II) fglrx(0): Year: 2009 Week: 1
[ 27.287] (II) fglrx(0): EDID Version: 1.3
[ 27.287] (II) fglrx(0): Digital Display Input
[ 27.287] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 27.287] (II) fglrx(0): Gamma: 2.20
[ 27.287] (II) fglrx(0): No DPMS capabilities specified
[ 27.287] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.287] (II) fglrx(0): First detailed timing is preferred mode
[ 27.287] (II) fglrx(0): redX: 0.577 redY: 0.333 greenX: 0.333 greenY: 0.554
[ 27.288] (II) fglrx(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
[ 27.288] (II) fglrx(0): Manufacturer's mask: 0
[ 27.288] (II) fglrx(0): Supported detailed timing:
[ 27.288] (II) fglrx(0): clock: 71.8 MHz Image Size: 344 x 193 mm
[ 27.288] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 27.288] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 784 v_border: 0
[ 27.288] (II) fglrx(0): Unknown vendor-specific block f
[ 27.288] (II) fglrx(0): AUO
[ 27.288] (II) fglrx(0): B156XW02 V6
[ 27.288] (II) fglrx(0): EDID (in hex):
[ 27.288] (II) fglrx(0): 00ffffffffffff0006afec2600000000
[ 27.288] (II) fglrx(0): 01130103802213780ad7759355558d29
[ 27.288] (II) fglrx(0): 24505400000001010101010101010101
[ 27.288] (II) fglrx(0): 0101010101010c1c56a0500010303020
[ 27.288] (II) fglrx(0): 360058c1100000180000000f00000000
[ 27.288] (II) fglrx(0): 00000000000000000020000000fe0041
[ 27.288] (II) fglrx(0): 554f0a202020202020202020000000fe
[ 27.288] (II) fglrx(0): 004231353658573032205636200a0065
[ 27.288] (II) fglrx(0): EDID vendor "AUO", prod id 9964
[ 27.288] (II) fglrx(0): Printing DDC gathered Modelines:
[ 27.288] (II) fglrx(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 27.288] (II) fglrx(0): Printing probed modes for output LVDS
[ 27.288] (II) fglrx(0): Modeline "1366x768"x60.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 27.288] (II) fglrx(0): Modeline "1360x768"x60.0 71.80 1360 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz e)
[ 27.288] (II) fglrx(0): Modeline "1280x768"x60.0 71.80 1280 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz e)
[ 27.288] (II) fglrx(0): Modeline "1280x720"x60.0 71.80 1280 1414 1446 1526 720 771 777 784 -hsync -vsync (47.1 kHz e)
[ 27.288] (II) fglrx(0): Modeline "1024x768"x60.0 71.80 1024 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz e)
[ 27.288] (II) fglrx(0): Modeline "1024x600"x60.0 71.80 1024 1414 1446 1526 600 771 777 784 -hsync -vsync (47.1 kHz e)
[ 27.288] (II) fglrx(0): Modeline "800x600"x60.0 71.80 800 1414 1446 1526 600 771 777 784 -hsync -vsync (47.1 kHz e)
[ 27.288] (II) fglrx(0): Modeline "800x480"x60.0 71.80 800 1414 1446 1526 480 771 777 784 -hsync -vsync (47.1 kHz e)
[ 27.288] (II) fglrx(0): Modeline "640x480"x60.0 71.80 640 1414 1446 1526 480 771 777 784 -hsync -vsync (47.1 kHz e)
[ 27.288] (II) fglrx(0): EDID for output DFP1
[ 27.288] (II) fglrx(0): EDID for output CRT1
[ 27.288] (II) fglrx(0): Output LVDS connected
[ 27.288] (II) fglrx(0): Output DFP1 disconnected
[ 27.288] (II) fglrx(0): Output CRT1 disconnected
[ 27.288] (II) fglrx(0): Using exact sizes for initial modes
[ 27.288] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 27.288] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 27.288] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 27.288] (II) fglrx(0): DPI set to (102, 102)
[ 27.288] (II) fglrx(0): Eyefinity capable adapter detected.
[ 27.288] (II) fglrx(0): Adapter AMD Radeon HD 6300M Series has 4 configurable heads and 1 displays connected.
[ 27.288] (==) fglrx(0): PseudoColor visuals disabled
[ 27.288] (II) Loading sub module "ramdac"
[ 27.288] (II) LoadModule: "ramdac"
[ 27.289] (II) Module "ramdac" already built-in
[ 27.289] (==) fglrx(0): NoDRI = NO
[ 27.289] (==) fglrx(0): Capabilities: 0x00000000
[ 27.289] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 27.289] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 27.289] (==) fglrx(0): UseFastTLS=0
[ 27.289] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 27.289] (--) Depth 24 pixmap format is 32 bpp
[ 27.289] Loading extension ATIFGLRXDRI
[ 27.289] (II) fglrx(0): doing swlDriScreenInit
[ 27.289] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 27.289] ukiDynamicMajor: found major device number 250
[ 27.289] ukiDynamicMajor: found major device number 250
[ 27.289] ukiDynamicMajor: found major device number 250
[ 27.289] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 27.289] ukiOpenDevice: node name is /dev/ati/card0
[ 27.289] ukiOpenDevice: open result is 12, (OK)
[ 27.289] ukiOpenByBusid: ukiOpenMinor returns 12
[ 27.290] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 27.290] (II) fglrx(0): [uki] DRM interface version 1.0
[ 27.290] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 27.290] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 27.290] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fe496b24000
[ 27.290] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 27.290] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 27.290] (II) fglrx(0): swlDriScreenInit done
[ 27.290] (II) fglrx(0): Kernel Module Version Information:
[ 27.290] (II) fglrx(0): Name: fglrx
[ 27.290] (II) fglrx(0): Version: 13.25.5
[ 27.290] (II) fglrx(0): Date: Nov 22 2013
[ 27.290] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 27.290] (II) fglrx(0): Kernel Module version matches driver.
[ 27.290] (II) fglrx(0): Kernel Module Build Time Information:
[ 27.290] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.11.6-4-desktop
[ 27.290] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 27.290] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 27.290] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 27.290] (II) fglrx(0): [uki] register handle = 0x00004000
[ 27.320] (II) fglrx(0): DRI initialization successfull
[ 27.320] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[ 27.320] (==) fglrx(0): Backing store disabled
[ 27.320] Loading extension FGLRXEXTENSION
[ 27.320] (**) fglrx(0): DPMS enabled
[ 27.321] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 27.321] (**) fglrx(0): Textured Video is enabled.
[ 27.321] (II) LoadModule: "glesx"
[ 27.322] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 27.482] (II) Module glesx: vendor="X.Org Foundation"
[ 27.482] compiled for 1.4.99.906, module version = 1.0.0
[ 27.482] Loading extension GLESX
[ 27.482] (II) fglrx(0): GLESX enableFlags = 592
[ 27.492] (II) fglrx(0): GLESX is enabled
[ 27.492] (II) LoadModule: "amdxmm"
[ 27.492] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 27.515] (II) Module amdxmm: vendor="X.Org Foundation"
[ 27.515] compiled for 1.4.99.906, module version = 2.0.0
[ 27.525] Loading extension AMDXVOPL
[ 27.525] Loading extension AMDXVBA
[ 27.542] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 27.546] (II) fglrx(0): Enable composite support successfully
[ 27.546] (WW) fglrx(0): Option "VendorName" is not used
[ 27.546] (WW) fglrx(0): Option "ModelName" is not used
[ 27.546] (II) fglrx(0): X context handle = 0x1
[ 27.546] (II) fglrx(0): [DRI] installation complete
[ 27.546] (==) fglrx(0): Silken mouse enabled
[ 27.547] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 27.547] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 27.547] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 27.547] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 28.523] (--) RandR disabled
[ 28.529] ukiDynamicMajor: found major device number 250
[ 28.529] ukiDynamicMajor: found major device number 250
[ 28.529] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 28.529] ukiOpenDevice: node name is /dev/ati/card0
[ 28.529] ukiOpenDevice: open result is 13, (OK)
[ 28.529] ukiOpenByBusid: ukiOpenMinor returns 13
[ 28.529] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 29.018] ukiDynamicMajor: found major device number 250
[ 29.018] ukiDynamicMajor: found major device number 250
[ 29.018] ukiDynamicMajor: found major device number 250
[ 29.018] ukiOpenDevice: node name is /dev/ati/card0
[ 29.018] ukiOpenDevice: open result is 14, (OK)
[ 29.018] ukiGetBusid returned 'PCI:1:0:0'
[ 29.018] ukiOpenDevice: node name is /dev/ati/card1
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: Open failed
[ 29.018] ukiOpenDevice: node name is /dev/ati/card2
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: Open failed
[ 29.018] ukiOpenDevice: node name is /dev/ati/card3
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: Open failed
[ 29.018] ukiOpenDevice: node name is /dev/ati/card4
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: Open failed
[ 29.018] ukiOpenDevice: node name is /dev/ati/card5
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: Open failed
[ 29.018] ukiOpenDevice: node name is /dev/ati/card6
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: Open failed
[ 29.018] ukiOpenDevice: node name is /dev/ati/card7
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.018] ukiOpenDevice: Open failed
[ 29.018] ukiOpenDevice: node name is /dev/ati/card8
[ 29.018] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: Open failed
[ 29.019] ukiOpenDevice: node name is /dev/ati/card9
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: Open failed
[ 29.019] ukiOpenDevice: node name is /dev/ati/card10
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: Open failed
[ 29.019] ukiOpenDevice: node name is /dev/ati/card11
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: Open failed
[ 29.019] ukiOpenDevice: node name is /dev/ati/card12
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: Open failed
[ 29.019] ukiOpenDevice: node name is /dev/ati/card13
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: Open failed
[ 29.019] ukiOpenDevice: node name is /dev/ati/card14
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: Open failed
[ 29.019] ukiOpenDevice: node name is /dev/ati/card15
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: open result is -1, (No such device)
[ 29.019] ukiOpenDevice: Open failed
[ 29.019] ukiDynamicMajor: found major device number 250
[ 29.019] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 29.019] ukiOpenDevice: node name is /dev/ati/card0
[ 29.019] ukiOpenDevice: open result is 14, (OK)
[ 29.019] ukiOpenByBusid: ukiOpenMinor returns 14
[ 29.019] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 30.084] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 30.085] ukiDynamicMajor: found major device number 250
[ 30.085] ukiDynamicMajor: found major device number 250
[ 30.085] ukiDynamicMajor: found major device number 250
[ 30.085] ukiOpenDevice: node name is /dev/ati/card0
[ 30.085] ukiOpenDevice: open result is 15, (OK)
[ 30.085] ukiGetBusid returned 'PCI:1:0:0'
[ 30.085] ukiOpenDevice: node name is /dev/ati/card1
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card2
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card3
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card4
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card5
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card6
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card7
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card8
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card9
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card10
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card11
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card12
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card13
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card14
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiOpenDevice: node name is /dev/ati/card15
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: open result is -1, (No such device)
[ 30.085] ukiOpenDevice: Open failed
[ 30.085] ukiDynamicMajor: found major device number 250
[ 30.085] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 30.085] ukiOpenDevice: node name is /dev/ati/card0
[ 30.085] ukiOpenDevice: open result is 15, (OK)
[ 30.085] ukiOpenByBusid: ukiOpenMinor returns 15
[ 30.085] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 30.210] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 30.282] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 30.282] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.282] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.282] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 30.282] (II) LoadModule: "evdev"
[ 30.283] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 30.283] (II) Module evdev: vendor="X.Org Foundation"
[ 30.283] compiled for 1.14.3, module version = 2.8.2
[ 30.283] Module class: X.Org XInput Driver
[ 30.283] ABI class: X.Org XInput driver, version 19.1
[ 30.283] (II) Using input driver 'evdev' for 'Power Button'
[ 30.283] (**) Power Button: always reports core events
[ 30.283] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 30.283] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.283] (--) evdev: Power Button: Found keys
[ 30.283] (II) evdev: Power Button: Configuring as keyboard
[ 30.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 30.283] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.283] (**) Option "xkb_rules" "evdev"
[ 30.283] (**) Option "xkb_model" "pc104"
[ 30.283] (**) Option "xkb_layout" "us,ru"
[ 30.283] (**) Option "xkb_variant" ",winkeys"
[ 30.283] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 30.319] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 30.319] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.319] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.319] (**) Video Bus: Applying InputClass "LocalKeyboard"
[ 30.319] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.320] (**) Video Bus: always reports core events
[ 30.320] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 30.320] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.320] (--) evdev: Video Bus: Found keys
[ 30.320] (II) evdev: Video Bus: Configuring as keyboard
[ 30.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6/event6"
[ 30.320] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 30.320] (**) Option "xkb_rules" "evdev"
[ 30.320] (**) Option "xkb_model" "pc104"
[ 30.320] (**) Option "xkb_layout" "us,ru"
[ 30.320] (**) Option "xkb_variant" ",winkeys"
[ 30.320] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 30.321] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 30.321] (II) No input driver specified, ignoring this device.
[ 30.321] (II) This device may have been added with another device file.
[ 30.321] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 30.321] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.321] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.321] (**) Sleep Button: Applying InputClass "LocalKeyboard"
[ 30.321] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.321] (**) Sleep Button: always reports core events
[ 30.321] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 30.321] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 30.321] (--) evdev: Sleep Button: Found keys
[ 30.321] (II) evdev: Sleep Button: Configuring as keyboard
[ 30.321] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 30.321] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id
[ 30.321] (**) Option "xkb_rules" "evdev"
[ 30.321] (**) Option "xkb_model" "pc104"
[ 30.321] (**) Option "xkb_layout" "us,ru"
[ 30.322] (**) Option "xkb_variant" ",winkeys"
[ 30.322] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 30.322] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[ 30.322] (II) No input driver specified, ignoring this device.
[ 30.322] (II) This device may have been added with another device file.
[ 30.323] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event10)
[ 30.323] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 30.323] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 30.323] (**) USB 2.0 Camera: Applying InputClass "LocalKeyboard"
[ 30.323] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 30.323] (**) USB 2.0 Camera: always reports core events
[ 30.323] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event10"
[ 30.323] (--) evdev: USB 2.0 Camera: Vendor 0x13d3 Product 0x5130
[ 30.323] (--) evdev: USB 2.0 Camera: Found keys
[ 30.323] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[ 30.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input10/event10"
[ 30.323] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 9)
[ 30.323] (**) Option "xkb_rules" "evdev"
[ 30.323] (**) Option "xkb_model" "pc104"
[ 30.323] (**) Option "xkb_layout" "us,ru"
[ 30.323] (**) Option "xkb_variant" ",winkeys"
[ 30.323] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 30.324] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 30.324] (II) No input driver specified, ignoring this device.
[ 30.324] (II) This device may have been added with another device file.
[ 30.324] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event5)
[ 30.324] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.324] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.324] (**) Asus Laptop extra buttons: Applying InputClass "LocalKeyboard"
[ 30.324] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 30.324] (**) Asus Laptop extra buttons: always reports core events
[ 30.324] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event5"
[ 30.324] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[ 30.324] (--) evdev: Asus Laptop extra buttons: Found keys
[ 30.324] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[ 30.324] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input5/event5"
[ 30.324] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 10)
[ 30.324] (**) Option "xkb_rules" "evdev"
[ 30.324] (**) Option "xkb_model" "pc104"
[ 30.324] (**) Option "xkb_layout" "us,ru"
[ 30.324] (**) Option "xkb_variant" ",winkeys"
[ 30.324] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 30.325] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.325] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.325] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.325] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[ 30.325] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.325] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.325] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.325] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 30.325] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 30.325] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.325] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.325] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 30.325] (**) Option "xkb_rules" "evdev"
[ 30.325] (**) Option "xkb_model" "pc104"
[ 30.325] (**) Option "xkb_layout" "us,ru"
[ 30.325] (**) Option "xkb_variant" ",winkeys"
[ 30.325] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 30.325] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event1)
[ 30.325] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.326] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.326] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 30.326] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 30.326] (II) LoadModule: "synaptics"
[ 30.326] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 30.326] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.326] compiled for 1.14.3, module version = 1.7.1
[ 30.326] Module class: X.Org XInput Driver
[ 30.326] ABI class: X.Org XInput driver, version 19.1
[ 30.326] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 30.326] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.326] (**) Option "Device" "/dev/input/event1"
[ 30.357] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 30.357] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1280 (res 0)
[ 30.357] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704 (res 0)
[ 30.357] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 30.357] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 30.357] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 30.357] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 30.357] (**) Option "HorizScrollDelta" "0"
[ 30.357] (**) Option "TapButton1" "1"
[ 30.357] (**) Option "TapButton2" "3"
[ 30.357] (**) Option "TapButton3" "2"
[ 30.357] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 30.357] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.372] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input1/event1"
[ 30.372] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 30.372] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.372] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 30.372] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.137
[ 30.372] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 30.372] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 30.372] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 30.372] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 30.372] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 30.373] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 30.373] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.373] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 30.373] (II) No input driver specified, ignoring this device.
[ 30.373] (II) This device may have been added with another device file.
[ 30.413] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 41.795] (II) fglrx(0): EDID vendor "AUO", prod id 9964
[ 41.795] (II) fglrx(0): Printing DDC gathered Modelines:
[ 41.795] (II) fglrx(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 44.792] (II) fglrx(0): EDID vendor "AUO", prod id 9964
[ 44.792] (II) fglrx(0): Printing DDC gathered Modelines:
[ 44.792] (II) fglrx(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 51.058] (II) fglrx(0): EDID vendor "AUO", prod id 9964
[ 51.058] (II) fglrx(0): Printing DDC gathered Modelines:
[ 51.058] (II) fglrx(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
бедная система
не выдержала количество драйверов
Что мне нужно сделать? И откуда они? Система-то голая была...
для начала создать файл /root/xorg.conf.new командой Xorg -configure
потом его отредактировать и перенести в /etc/X11 как xorg.conf
а вот только потом запускать сервер
(это всё для свободных драйверов)
для проприетарщины вариант немного иной
сначала создать xorg.conf, потом установить драйвер
а уж затем снова отредактировать xorg.conf
(это такой красноглазый труЪ-вариант)
Хорошо. А почему у меня не так, как у людей?
не знаю
Продолжаю тему... Выяснилось, что не работает.... подсветка экрана! То-есть, на чёрном фоне очень слабо (еле-еле, если очень вглядываться, раньше и не видел) виден рабочий стол. Подключил к ноуту второй монитор LCD, работает нормально, определяет два монитора, монитор ноута определяет как LVDS. Кнопками яркость не регулируется. Подскажите, как выйти из положения?
не работает.... подсветка экрана!
Изменил название темы.
Вопрос, увы, остаётся актуальным...
Не осилил я, откатился на 12.3. Обновляю ядро, ставлю драйвер бета 9.4. И... снова чернота. И на старом ядре (3.7.10) коробочном, и на новом, 3.12.3... Сложилось впечатление, что эта бета не работает с моим железом, т.к. повторюсь, при подключении к ноуту LCD-монитора он работает... Хотя radeon 6ХХХМ (6370) заявлена как поддерживаемая. Теперь ситуация: старые драйвера не поддерживают ядро 3.12.х и OpenSuSe 13.1, новый (в смысле, бета 9.4) - не работает вообще. Что остаётся - откат на 12.3 и ядро 3.11.х?
Прошу прощения за поднятие старой темы. При выполнении Xorg -configure имею следующие ошибки:
Можно ли как-то решить проблему с видеодрайвером?
dezhurant,
В радеонах так можно создать xorg.conf:
Я делал так многократно. Желаемого свечения монитора не получил. Xorg.conf создаётся, вот он:
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Чёрный экран.
Я делал так многократно. Желаемого свечения монитора не получил.
Иксы-то ведь грузились? (что вам сейчас и нужно)
А подсветка монитора немного в другой степи.
А подсветка монитора немного в другой степи.
То-есть, непобедимо?
verg хотел сказать что монитор это HW настройки. кнопачки всякие там. крутилочки и т.д.
Linux Forum → openSUSE и SUSE Linux Enterprise → Не работает.... подсветка экрана! (Fglrx)
Форум работает на PunBB, при поддержке Informer Technologies, Inc
