omponent: system-config-network
Version: 1.3.99.21
Summary: TBf6c835f4 NCHardwareList.py:482:save:AttributeError: HwWireless instance has no attribute 'type'

Traceback (most recent call last):
  File "/usr/share/system-config-network/netconfpkg/gui/maindialog.py", line 696, in on_Dialog_delete_event
    self.save()
  File "/usr/share/system-config-network/netconfpkg/gui/maindialog.py", line 370, in save
    self.saveHardware()
  File "/usr/share/system-config-network/netconfpkg/gui/maindialog.py", line 398, in saveHardware
    hardwarelist.save()
  File "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 482, in save
    if (hw.Type == ETHERNET or \
AttributeError: HwWireless instance has no attribute 'type'

Local variables in innermost frame:
self: HardwareList.Ethernet.eth0.Status=system
HardwareList.Ethernet.eth0.Name=eth0
HardwareList.Ethernet.eth0.Type=Ethernet
HardwareList.Ethernet.eth0.Card.ModuleName=tg3
HardwareList.Ethernet.eth0.Description=Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express
HardwareList.Wireless.wlan0.Status=system
HardwareList.Wireless.wlan0.Name=wlan0
HardwareList.Wireless.wlan0.Type=Wireless
HardwareList.Wireless.wlan0.Card.ModuleName=iwl3945
HardwareList.Wireless.wlan0.Description=Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection
HardwareList.Ethernet.eth1.Status=inactive
HardwareList.Ethernet.eth1.Name=eth1
HardwareList.Ethernet.eth1.Type=Ethernet
HardwareList.Ethernet.eth1.Card.ModuleName=axnet_cs
HardwareList.Ethernet.eth1.Card.Mem=
HardwareList.Ethernet.eth1.Card.IoPort=
HardwareList.Ethernet.eth1.Card.IoPort1=
HardwareList.Ethernet.eth1.Card.IoPort2=
HardwareList.Ethernet.eth1.Description=Asix AX88190 PCMCIA ethernet driver

modules: <netconfpkg.NCHardwareList.MyConfModules instance at 0xf8ba200>
hw: Hardware.Status=system
Hardware.Name=wlan0
Hardware.Type=Wireless
Hardware.Card.ModuleName=iwl3945
Hardware.Description=Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection

wvdial: <rhpl.ConfSMB.ConfSMB instance at 0xf8b74d0>
type: Ethernet
isdn: <netconfpkg.NCisdnhardware.ConfISDN instance at 0xf8b7320>
mod: eth1

Version    1.0.1        Sep. 20, 2006
* Fixups for compilation issues in newest kernel version 2.6.16.
* External PHY support.

================
Prerequisites
================

Prepare to build the driver, you need the Linux kernel sources installed on the
build machine, and make sure that the version of the running kernel must match
the installed kernel sources. If you don't have the kernel sources, you can get
it from www.kernel.org or contact to your Linux distributor. If you don't know
how to do, please refer to KERNEL-HOWTO.

Note: Please make sure the kernel is built with one of the "Support for
       Host-side, EHCI, OHCI, or UHCI" option support.

===========================
Conditional Compilation Flag
===========================
[AX_FORCE_BUFF_ALIGN]
Description:
       There are alignment issues of USB buffer in some USB host controllers.
       Turn on this flag if the implementation of your USB host controller
       cannot handle non-double word aligned buffer.
       When turn on this flag, driver will fixup egress packet aligned on double
       word boundary before deliver to USB host controller.
Setting:
    1 -> Enable TX buffers forced on double word alignment.
    0 -> Disable TX buffers forced on double word alignment.
Default:
    0

================
Getting Start
================

1. Extract the compressed driver source file to your template directory by the
   following command:

    [root@localhost template]# tar -xf DRIVER_SOURCE_PACKAGE.tar.bz2

2. Now, the driver source files should be extracted under the current directory.
   Executing the following command to compile the driver:

    [root@localhost template]# make
           
3. If the compilation is well, the asix.ko will be created under the current
   directory.

4. If you want to use modprobe command to mount the driver, executing the
   following command to install the driver into your Linux:

    [root@localhost template]# make install

================
Usage
================

1. If you want to load the driver manually, go to the driver directory and
   execute the following commands:

    [root@localhost template]# insmod asix.ko

2. If you had installed the driver during driver compilation, then you can use
   the following command to load the driver automatically.

    [root@localhost anywhere]# modprobe asix

If you want to unload the driver, just executing the following command:

    [root@localhost anywhere]# rmmod asix