Файл imm.mib, который не удалось сконвертировать с помощью snmpttconvertmib спокойно загружается в SNMPc manager. Почему snmpttconvertmib не может его сконвертировать?
[root@mon snmptt]# snmpttconvertmib --in=/shares/Baiburin/imm.mib --out=/shares/Baiburin/test.conf --exec='/usr/local/nagios/libexec/eventhandlers/submit_check_result $r TRAP 0'
exec: /usr/local/nagios/libexec/eventhandlers/submit_check_result $r TRAP 0
***** Processing MIB file *****
snmptranslate version: NET-SNMP version: 5.5
severity: Normal
File to load is: /shares/Baiburin/imm.mib
File to APPEND TO: /shares/Baiburin/test.conf
MIBS environment var: /shares/Baiburin/imm.mib
mib name: IMM-MIB
Processing MIB: IMM-MIB
#
skipping a TRAP-TYPE / NOTIFICATION-TYPE line - probably an import line.
Done
Total translations: 0
Successful translations: 0
Failed translations: 0
The MIB file did not contain any TRAP-TYPE or NOTIFICATION-TYPE definitions,
so no translations occured. Try another MIB file.
Вот часть файла imm.mib (целиком он слишком длинный)
-- ***************************************************************************
-- ***************************************************************************
--
-- File : imm.mib
-- Description : Integrated Management Module mib for SNMP
-- By : IBM
-- Version : 1.36
-- Date : October 29, 2012
--
--
-- Copyright (c) 2012 IBM All Rights Reserved.
--
--
-- Contains MIB description for:
-- This MIB is to be used to provide configuration support of IMM as well as monitoring support
-- for the system.
-- ***************************************************************************
-- ***************************************************************************
-- ***************************************************************************
-- Revisions:
-- 5/12/2010
-- Function equivalent to current IMM. The top level OID and name was changed so it is a different
-- MIB than current IMM MIB although many objects are in common. This MIB was extended from the current
-- IMM MIB to cover the full functionality of the IMM. It does not yet cover new features that are unique to IMM2.
--
-- 6/29/2010
-- Changed all thresholds to read-only.
-- Based on changes in the IMM mib required for consistency with web operations,
-- the changes were made in the imm2.mib file.
-- schedulePowerOffWithOsShutdown, schedulePowerOnSystem, scheduleShutdownOsThenRestart
-- These objects had their DESCRIPTION field updated so they can be operationally consistent with the web.
--
-- resetPowerSchedules
-- This object was added to allow the user to reset all the power schedules to a default status,
-- for consistent operation with the web.
--
-- 7/22/2010
-- Removed obsolete description text about needing to disable SNMP prior to changing some settings.
-- Changed type of CommunityName to DisplayString
--
-- 7/28/2010 Version 1.0
-- Updated version info for imm2.mib and added portParity and portStopBits since these are supported
-- in IMM2 hardware.
--
-- 8/3/2010 Version 1.1
-- Fixed OIDs for a couple of objects and added one missing trap object.
--
-- 9/13/2010 Version 1.2
-- added additional NTP servers, fixed duplicate OID for {serialPortCfg 3}
--
-- 9/20/2010 Version 1.3
-- changes to bring imm2.mib up-to-date with latest imm.mib
-- added sections to allow configuring of filters for Alert Recipients and SNMP
-- added another delay value
-- add DDNS setting
--
-- 9/22/2010 Version 1.4
-- Combine System Power on/off filters for Alert Recipients and SNMP into one filter and renumber
-- the following objects.
--
-- 10/01/2010 Version 1.5
-- remove ledComponentType
-- add Information LED object to display status or turn off
--
-- 10/11/2010 Version 1.6
-- updated Description of immVpdVersionString
--
-- 10/25/2010 Version 1.7
-- added VPD fields for CPU, Memory, Host MAC addresses, and Product Name to match web and current IMM implementation.
--
-- 10/28/2010 Version 1.8
-- made some updates in the CPU and Host MAC address tables base on IMM(1) implementation.
--
-- 12/02/2010 Version 1.9 (Changes for consistency with IMM updates and IMM2-added features)
-- added Description OID to HostMACAddressEntry
-- added Description OID to SyStemCPUVpdEntry
-- added several OIDs to customSecuritySettings, to include the same configuration options as on the Web and CLI
-- added sshClientAuthPubKeyTable to configure the SSH keys for users to do key authentication for CLI access (same config as Web and CLI)
-- minor changes to spClockTimezoneSetting to be consistent with IMM
-- added some OIDs to spIdentification for RackID, etc, to be consistent with Web and CLI configuration
-- added 2 OIDs to tcpPortAssignmentCfg to allow the SMTP and Syslog ports to be configured
--
-- 12/03/2010 Version 1.10
-- Change rafSpTrapPower to rafSpTrapPowerS
--
-- 01/10/2011 Version 1.11
-- remove reduntand lockoutPeriod OID and renumber snmpAlertFilters object
-- fix compile issue with rafSpTrapPowerS
--
-- 01/27/2011 Version 1.12
-- add new OIDS for a 4th LDAP server.
-- update spClockTimezoneSetting with correct help text based on actual implementation
--
-- 02/22/2011 Version 1.13
-- add new OIDS for 2nd and 3rd LDAP Trusted Certificate Status values.
--
-- 02/24/2011 Version 1.14
-- remove ibmSyslogPortAssignment and ibmSMTPPortAssignment from tcpPortAssignmentCfg
-- add remoteAlertIdEntrySyslogPortAssignment and remoteAlertIdEntrySMTPPortAssignment to RemoteAlertIdsEntry
--
-- 03/17/2011 Version 1.15
-- fix caps of ethernetInterfaceStatelessAutoConfigAddressesIndex
--
-- 03/21/2011 Version 1.16
-- change status of ldapUserSearchBaseDN to deprecated as it is no longer needed or used.
--
-- 06/28/2011 Version 1.17
-- changes for common IMM1 and IMM2 MIB
--
-- 07/05/2011 Version 1.18
-- more changes for common IMM1 and IMM2 MIB
-- ldapServiceName - IMMv2 only; removed remoteAlertIdEntrySMTPPortAssignment
--
-- 07/26/2011 Version 1.19
-- added requested changes needed for smilint and smidump to work
--
-- 08/09/2011 Version 1.20
-- changed the accountLockoutPeriod setting values to match web ui / spec
-- changed the passwordChangeInterval setting to match spec
-- changed the minimumPasswordLength setting to match spec
--
-- 09/28/2011 Version 1.21
-- changed the snmpSystemName setting value to match web ui
--
-- 10/12/2011 Version 1.22
-- reverted the change to snmpSystemName setting value
--
-- 12/11/2011 Version 1.23
-- added importTrustedCertificate4
-- changes made for Daylight Savingd Time settings
--
-- 12/14/2011 Version 1.24
-- for some of the objects in the "spIdentification" section, a commment was added to the
-- description indicating that the object could only be read in some hw configs
--
-- 01/06/2012 Version 1.25
-- added sslClientLDAPTrustedCertificate4Status object
-- 01/013/2012 Version 1.26
-- removed baud230400 rate from portbaud
-- added to the description of ethernetInterfaceDataRate
--
-- 01/26/2012 Version 1.27
-- changed spRackUnitHeight and spRackBladeBay objects to read-only
--
-- 04/19/2012 Vertsion 1.28
-- corrected typos in spClockTimezoneSetting object
--
-- 05/02/2012 Version 1.29
-- corrected groupRBSroleId string size range
--
-- 05/11/2012 Version 1.30
-- Objects changePasswordFirstAccess, accountLockoutPeriod, maxLoginFailures
-- and passwordChangeInterval marked as "IMM2-only"
--
-- 05/31/2012 Version 1.31
-- Addeded remoteAlertIdEntrySyslogHostname and remoteAlertIdEntryType
--
-- 07/02/2012 Version 1.32
-- Added Objects for Authenticated SMTP
--
-- 07/23/2012 Version 1.33
-- Added Objects for Ethernet VLAN
-- sslConfig object group marked "IMM2 only"
-- ntpIpAddressHostname2,3 and 4 marked "IMM2 only"
-- ldapSearchDomain, removed "IMM2 only"
-- ldapDomainSource marked "IMM2 only"
--
-- 08/06/2012 Version 1.34
-- Changed remoteAlertIdEmailAddr OCTET STRING(SIZE(0..320))
--
-- 09/18/2012 Version 1.35
-- Added additional objects for Service Advisor:
-- httpProxyAuthentication, contactInformation.phoneExtension, altContactName,
-- altPhoneNumber, altPhoneExtension, altEmailAddress, machineLocationPhoneNumber,
-- autoFTPCallMode.sftp, testCallHome.generateTestCallHome
-- Marked contactInformation.companyName "IMM1-only"
-- Marked smtpServerAuthentication, smtpServerAuthenticationUser,
-- smtpServerAuthenticationPassword, and smtpServerAuthenticationMethod
-- "IMM2 only"
-- Marked remoteAlertIdEmailAddr as "IMM1 limited to 64"
--
-- 10/29/2012 Version 1.36
-- Removed httpProxyAuthentication object.
-- Added siz to autoFTPCallAddr, autoFTPCallUserID, and autoFTPCallPassword
--
-- ***************************************************************************
IMM-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE FROM RFC-1212
enterprises FROM RFC1155-SMI
DisplayString FROM RFC1213-MIB
IpAddress FROM RFC1155-SMI
-- PTE: added following 7/12/2011
Gauge FROM RFC1155-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC
TRAP-TYPE FROM RFC-1215;
InetAddressIPv6 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "02x:02x:02x:02x:02x:02x:02x:02x"
-- PTE: changed to mandatory
-- STATUS current
STATUS mandatory
DESCRIPTION
"Represents an IPv6 network address. Since MIB browsers
may require different formats, the address is
expected to be the 16 byte address in network-byte order,
and shortened formats such as 0::0 are not accepted in SET
operations. Two common examples are:
The NetSNMP command line will accept SET requests like:
snmpset -v1 -cprivate <host> s 2001:00:00:00:FFFF:CCC4:BBB2:AAA6
Other MIB browsers may require the SET request value to be formatted as:
# 0x20 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0xFF 0xCC 0xC4 0xBB 0xB2 0xAA 0xA6"
SYNTAX OCTET STRING (SIZE (16))
EntryStatus ::= INTEGER
{ valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
-- The status of a table entry.
--
-- Setting this object to the value invalid(4) has the
-- effect of invalidating the corresponding entry.
-- That is, it effectively disassociates the mapping
-- identified with said entry.
-- It is an implementation-specific matter as to whether
-- the agent removes an invalidated entry from the table.
-- Accordingly, management stations must be prepared to
-- receive tabular information from agents that corresponds
-- to entries currently not in use. Proper
-- interpretation of such entries requires examination
-- of the relevant EntryStatus object.
--
-- An existing instance of this object cannot be set to
-- createRequest(2). This object may only be set to
-- createRequest(2) when this instance is created. When
-- this object is created, the agent may wish to create
-- supplemental object instances to complete a conceptual
-- row in this table. Immediately after completing the
-- create operation, the agent must set this object to
-- underCreation(3).
--
-- Entries shall exist in the underCreation(3) state until
-- the management station is finished configuring the
-- entry and sets this object to valid(1) or aborts,
-- setting this object to invalid(4). If the agent
-- determines that an entry has been in the
-- underCreation(3) state for an abnormally long time,
-- it may decide that the management station has
-- crashed. If the agent makes this decision,
-- it may set this object to invalid(4) to reclaim the
-- entry. A prudent agent will understand that the
-- management station may need to wait for human input
-- and will allow for that possibility in its
-- determination of this abnormally long period.
-- IBM enterprise group
ibm OBJECT IDENTIFIER ::= { enterprises 2 }
-- IBM products group
ibmAgents OBJECT IDENTIFIER ::= { ibm 3 }
-- IBM e-Server Advanced System Management Support Processor(SP) agent group
netfinitySupportProcessorAgent OBJECT IDENTIFIER ::= { ibmAgents 51 }
-- IBM integrated Management Module
ibmIntegratedManagementModuleMIB OBJECT IDENTIFIER ::= { netfinitySupportProcessorAgent 3 }
-- ***************************************************************************
-- Start: Define groups of objects within the ibmRemoteSupSnmpMIB
-- ***************************************************************************
--This group of objects provides the various environmental monitors for the
-- local system and the IMM
monitors OBJECT IDENTIFIER ::= { ibmIntegratedManagementModuleMIB 1 }
--This group of objects provides the error log objects for the IMM
errorLogs OBJECT IDENTIFIER ::= { ibmIntegratedManagementModuleMIB 2 }
--This group of objects provides configuration functions for the IMM
configureSP OBJECT IDENTIFIER ::= { ibmIntegratedManagementModuleMIB 3 }
--This group of objects provides configuration functions for the system(server)
generalSystemSettings OBJECT IDENTIFIER ::= { ibmIntegratedManagementModuleMIB 4 }
--This group of objects provides configuration functions for system power
systemPower OBJECT IDENTIFIER ::= { ibmIntegratedManagementModuleMIB 5 }
--This group of objects provides functions to boot the IMM and system
restartReset OBJECT IDENTIFIER ::= { ibmIntegratedManagementModuleMIB 6 }
--This group of objects provides functions to update the IMM firmware
firmwareUpdate OBJECT IDENTIFIER ::= { ibmIntegratedManagementModuleMIB 7 }
--This group of objects provides functions Service Advisor
serviceAdvisor OBJECT IDENTIFIER ::= { ibmIntegratedManagementModuleMIB 8 }
-- ****************************************************************************
-- Monitors
-- ****************************************************************************
-- ************************************************************************
-- Temperature
-- ************************************************************************
temperature OBJECT IDENTIFIER ::= { monitors 1 }
tempNumber OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION "The present number of rows in the temperature table."
::= { temperature 1 }
tempTable OBJECT-TYPE
SYNTAX SEQUENCE OF TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "This table contains temperature measurement information."
::= { temperature 2 }
tempEntry OBJECT-TYPE
SYNTAX TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each row contains parameters related to a temperature measurement channel."
INDEX { tempIndex }
::= { tempTable 1 }
TempEntry ::=
SEQUENCE {
tempIndex INTEGER,
tempDescr DisplayString,
tempReading INTEGER,
tempNominalReading INTEGER,
tempNonRecovLimitHigh INTEGER,
tempCritLimitHigh INTEGER,
tempNonCritLimitHigh INTEGER,
tempNonRecovLimitLow INTEGER,
tempCritLimitLow INTEGER,
tempNonCritLimitLow INTEGER
}
tempIndex OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION "This column is used to identify a particular
temperature measurement channel."
::= { tempEntry 1 }
tempDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
ACCESS read-only
STATUS mandatory
DESCRIPTION "A description of the temperature measurement
channel."
::= { tempEntry 2 }
tempReading OBJECT-TYPE
SYNTAX INTEGER
UNITS "Degrees Celsius"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The measured temperature."
::= { tempEntry 3 }
tempNominalReading OBJECT-TYPE
SYNTAX INTEGER
UNITS "Degrees Celsius"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The nominal temperature, if available."
::= { tempEntry 4 }
tempNonRecovLimitHigh OBJECT-TYPE
SYNTAX INTEGER
UNITS "Degrees Celsius"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The non-recoverable limit for the measured temperature. If
the measured value rises above this limit a trap is sent."
::= { tempEntry 5}
tempCritLimitHigh OBJECT-TYPE
SYNTAX INTEGER
UNITS "Degrees Celsius"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The critical limit for the measured temperature. If
the measured value rises above this limit a trap is sent."
::= { tempEntry 6}
tempNonCritLimitHigh OBJECT-TYPE
SYNTAX INTEGER
UNITS "Degrees Celsius"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The non-critical limit for the measured temperature. If
the measured value rises above this limit a trap is sent."
::= { tempEntry 7}
tempNonRecovLimitLow OBJECT-TYPE
SYNTAX INTEGER
UNITS "Degrees Celsius"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The non-recoverable limit for the measured temperature. If
the measured value falls below this limit a trap is sent."
::= { tempEntry 8}
tempCritLimitLow OBJECT-TYPE
SYNTAX INTEGER
UNITS "Degrees Celsius"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The critical limit for the measured temperature. If
the measured value falls below this limit a trap is sent."
::= { tempEntry 9}
tempNonCritLimitLow OBJECT-TYPE
SYNTAX INTEGER
UNITS "Degrees Celsius"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The non-critical limit for the measured temperature. If
the measured value falls below this limit a trap is sent."
::= { tempEntry 10}
-- ************************************************************************
-- Voltages
-- ************************************************************************
voltage OBJECT IDENTIFIER ::= { monitors 2 }
--------------------------------------------------------------------------------
voltNumber OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION "The present number of rows in the voltage table."
::= { voltage 1 }
voltTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoltEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "This table contains voltage measurement information."
::= { voltage 2 }
voltEntry OBJECT-TYPE
SYNTAX VoltEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each row contains parameters related to a
voltage measurement channel."
INDEX { voltIndex }
::= { voltTable 1 }
VoltEntry ::=
SEQUENCE {
voltIndex INTEGER,
voltDescr DisplayString,
voltReading INTEGER,
voltNominalReading INTEGER,
voltNonRecovLimitHigh INTEGER,
voltCritLimitHigh INTEGER,
voltNonCritLimitHigh INTEGER,
voltNonRecovLimitLow INTEGER,
voltCritLimitLow INTEGER,
voltNonCritLimitLow INTEGER
}
voltIndex OBJECT-TYPE
SYNTAX INTEGER (1..1000)
ACCESS read-only
STATUS mandatory
DESCRIPTION "This column is used to identify a particular
voltage measurement channel."
::= { voltEntry 1 }
voltDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
ACCESS read-only
STATUS mandatory
DESCRIPTION "A description of the voltage measurement channel."
::= { voltEntry 2 }
voltReading OBJECT-TYPE
SYNTAX INTEGER
UNITS "Millivolts"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The measured voltage."
::= { voltEntry 3 }
voltNominalReading OBJECT-TYPE
SYNTAX INTEGER
UNITS "Millivolts"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The nominal voltage, if available."
::= { voltEntry 4 }
voltNonRecovLimitHigh OBJECT-TYPE
SYNTAX INTEGER
UNITS "Millivolts"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The high non-recoverable limit for the measured voltage. If the
measured value falls above this limit a trap is sent."
::= { voltEntry 5 }
voltCritLimitHigh OBJECT-TYPE
SYNTAX INTEGER
UNITS "Millivolts"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The high critical limit for the measured voltage. If the
measured value rises above this limit a trap is sent."
::= { voltEntry 6 }
voltNonCritLimitHigh OBJECT-TYPE
SYNTAX INTEGER
UNITS "Millivolts"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The high non-critical limit for the measured voltage. If the
measured value rises above this limit a trap is sent."
::= { voltEntry 7 }
voltNonRecovLimitLow OBJECT-TYPE
SYNTAX INTEGER
UNITS "Millivolts"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The low non-recoverable limit for the measured voltage. If the
measured value falls below this limit a trap is sent."
::= { voltEntry 8 }
voltCritLimitLow OBJECT-TYPE
SYNTAX INTEGER
UNITS "Millivolts"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The low critical limit for the measured voltage. If the
measured value falls below this limit a trap is sent."
::= { voltEntry 9 }
voltNonCritLimitLow OBJECT-TYPE
SYNTAX INTEGER
UNITS "Millivolts"
ACCESS read-only
STATUS mandatory
DESCRIPTION "The low non-critical limit for the measured voltage. If the
measured value falls below this limit a trap is sent."
::= { voltEntry 10 }
