Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda Green (Adv. Format)
Device Model: ST2000DL003-9VT166
Serial Number: 6YD21HH8
LU WWN Device Id: 5 000c50 046df7ccd
Firmware Version: CC3C
User Capacity: 2 000 398 934 016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Mar 23 04:18:08 2014 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 623) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30b7) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 084 006 Pre-fail Always - 96368
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 115
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always - 17196193719
9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 19829
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 84
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 714
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 055 046 045 Old_age Always - 45 (Min/Max 29/47)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 65
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 141
194 Temperature_Celsius 0x0022 045 054 000 Old_age Always - 45 (0 21 0 0)
195 Hardware_ECC_Recovered 0x001a 033 003 000 Old_age Always - 96368
197 Current_Pending_Sector 0x0012 086 086 000 Old_age Always - 1192
198 Offline_Uncorrectable 0x0010 086 086 000 Old_age Offline - 1192
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 96537979923439
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 660774676
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1381257330
SMART Error Log Version: 1
ATA Error Count: 714 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 714 occurred at disk power-on lifetime: 19733 hours (822 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff ef 00 20d+08:13:24.246 READ DMA EXT
27 00 00 00 00 00 e0 00 20d+08:13:24.245 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 20d+08:13:24.237 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 20d+08:13:24.214 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 20d+08:13:24.161 READ NATIVE MAX ADDRESS EXT
Error 713 occurred at disk power-on lifetime: 19733 hours (822 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff ef 00 20d+08:13:11.589 READ DMA EXT
27 00 00 00 00 00 e0 00 20d+08:13:11.588 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 20d+08:13:11.580 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 20d+08:13:11.557 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 20d+08:13:11.548 READ NATIVE MAX ADDRESS EXT
Error 712 occurred at disk power-on lifetime: 19733 hours (822 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff ef 00 20d+08:13:04.712 READ DMA EXT
27 00 00 00 00 00 e0 00 20d+08:13:04.711 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 20d+08:13:04.703 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 20d+08:13:04.696 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 20d+08:13:04.659 READ NATIVE MAX ADDRESS EXT
Error 711 occurred at disk power-on lifetime: 19733 hours (822 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff ef 00 20d+08:12:59.016 READ DMA EXT
27 00 00 00 00 00 e0 00 20d+08:12:59.015 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 20d+08:12:59.007 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 20d+08:12:58.999 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 20d+08:12:58.959 READ NATIVE MAX ADDRESS EXT
Error 710 occurred at disk power-on lifetime: 19733 hours (822 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff ef 00 20d+08:12:47.883 READ DMA EXT
27 00 00 00 00 00 e0 00 20d+08:12:47.882 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 20d+08:12:47.875 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 20d+08:12:47.851 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 20d+08:12:47.726 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 19731 3189109384
# 2 Short offline Completed: read failure 90% 19731 3184389160
# 3 Extended offline Aborted by host 90% 3258 -
# 4 Short offline Completed without error 00% 3258 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (Adv. Format)
Device Model: WDC WD15EARS-00Z5B1
Serial Number: WD-WMAVU1607727
LU WWN Device Id: 5 0014ee 0ac9a5569
Firmware Version: 80.00A80
User Capacity: 1 500 301 910 016 bytes [1,50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Mar 23 04:18:10 2014 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (32400) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 181 177 021 Pre-fail Always - 5950
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 906
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 33042
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 258
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 156
193 Load_Cycle_Count 0x0032 093 093 000 Old_age Always - 323279
194 Temperature_Celsius 0x0022 104 093 000 Old_age Always - 46
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 195 195 000 Old_age Always - 1465
198 Offline_Uncorrectable 0x0030 195 195 000 Old_age Offline - 1454
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 191 191 000 Old_age Offline - 1970
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 11181 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
При этом в логах куча много вот такой бабуйни:
Mar 19 01:26:52 goblin-server kernel: [ 541.480425] ata3.01: configured for UDMA/133
Mar 19 01:26:52 goblin-server kernel: [ 541.480447] ata3: EH complete
Mar 19 01:26:55 goblin-server kernel: [ 544.852304] ata3.00: configured for UDMA/133
Mar 19 01:26:55 goblin-server kernel: [ 544.900417] ata3.01: configured for UDMA/133
Mar 19 01:26:55 goblin-server kernel: [ 544.900432] ata3: EH complete
Mar 19 01:26:58 goblin-server kernel: [ 548.272328] ata3.00: configured for UDMA/133
Mar 19 01:26:58 goblin-server kernel: [ 548.288401] ata3.01: configured for UDMA/133
Mar 19 01:26:58 goblin-server kernel: [ 548.288422] ata3: EH complete
Mar 19 01:27:02 goblin-server kernel: [ 551.656310] ata3.00: configured for UDMA/133
Mar 19 01:27:02 goblin-server kernel: [ 551.672385] ata3.01: configured for UDMA/133
Mar 19 01:27:02 goblin-server kernel: [ 551.672401] ata3: EH complete
Mar 19 01:27:05 goblin-server kernel: [ 555.040305] ata3.00: configured for UDMA/133
Mar 19 01:27:05 goblin-server kernel: [ 555.056380] ata3.01: configured for UDMA/133
Mar 19 01:27:05 goblin-server kernel: [ 555.056395] ata3: EH complete
Mar 19 01:27:09 goblin-server kernel: [ 558.412313] ata3.00: configured for UDMA/133
Mar 19 01:27:09 goblin-server kernel: [ 558.428380] ata3.01: configured for UDMA/133
Mar 19 01:27:09 goblin-server kernel: [ 558.428400] sd 2:0:1:0: [sdc] Unhandled sense code
Mar 19 01:27:09 goblin-server kernel: [ 558.428404] sd 2:0:1:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Mar 19 01:27:09 goblin-server kernel: [ 558.428408] sd 2:0:1:0: [sdc] Sense Key : Medium Error [current] [descriptor]
Mar 19 01:27:09 goblin-server kernel: [ 558.428415] Descriptor sense data with sense descriptors (in hex):
Mar 19 01:27:09 goblin-server kernel: [ 558.428418] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
Mar 19 01:27:09 goblin-server kernel: [ 558.428432] be 15 f2 88
Mar 19 01:27:09 goblin-server kernel: [ 558.428438] sd 2:0:1:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed
Mar 19 01:27:09 goblin-server kernel: [ 558.428446] sd 2:0:1:0: [sdc] CDB: Read(10): 28 00 be 15 f2 88 00 00 08 00
Mar 19 01:27:09 goblin-server kernel: [ 558.428539] ata3: EH complete
печалька...
жалко вин ой как жалко, да такое пережить это стрес для психики и печени 