Здравствуйте,
Поставил CentOS7 на реальное железо (не виртуализации) Настроил сеть, пользователя для SSH
Ставлю squid - yum install squid
смотрю в /etc/squid/squid.conf (Вижу всего 75 строк. Когда то, ставил на FreeBSD было около 5 тыщ строк - Это вообще нормально ? : ) )
в Конф добавляю строку acl localnet src 192.168.5.0/24
и http_port 192.168.5.251:3128
Если верить всяким статейкам, то этого, в принципе должно быть достаточно
Затем service squid start
Сквид вроде стартует, но по факту не работает
Подскажите пжалста, где, что я не так?
/etc/squid/squid.conf
#
# Recommended minimum configuration:
#
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src 192.168.5.0/24
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
# Squid normally listens to port 3128
http_port 192.168.5.251:3128
# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320Сетевой интерфейс
TYPE=Ethernet
BOOTPROTO=static
DEFROUTE=
IPV4_FAILURE_FATAL=no
IPV6INIT=no
IPV6_AUTOCONF=
IPV6_DEFROUTE=
IPV6_FAILURE_FATAL=no
NAME=enp3s2
UUID=af318c70-f6e0-4f6a-8d16-2ffdc6dad071
ONBOOT=yes
HWADDR=00:11:85:04:14:DF
IPADDR0=192.168.5.251
PREFIX0=24
GATEWAY0=192.168.10.254
DNS1=192.168.10.202
IPV6_PEERDNS=
IPV6_PEERROUTES=[root@localhost network-scripts]# ps -aux | grep squid
root 2760 0.0 0.1 85076 3016 ? Ss 18:16 0:00 /usr/sbin/squid -f /etc/squid/squid.conf
squid 2762 0.0 0.8 99308 15388 ? S 18:16 0:00 (squid-1) -f /etc/squid/squid.conf
squid 2763 0.0 0.0 27384 1228 ? S 18:16 0:00 (logfile-daemon) /var/log/squid/access.log
root 3096 0.0 0.0 112640 936 pts/0 S+ 18:57 0:00 grep --color=auto squid
