1 Тема от TY3 (22.08.2014 09:06:38 отредактировано TY3)

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

Доброго времени суток уважаемые!

Разрешите сразу приступить к описанию проблемы.

Ситуация следующая. На виртуальной машине Oracle VM VirtualBox установлена ОС Fedora 15. Худо-бедно, с горем пополам, кое как, я работал в Linux'е, нарабатывая навыки юзера. На днях, устанавливал пакеты, удалял ненужные. И вот настал момент, когда после загрузки Fedora 15, полоса загрузки пробежала на экране и всё... дальше ОС не запускается. Загрузка стопорится. При нажатии некоторых клавиш, экран можно лищь переключить с полосы загрузки на фрагмент загрузочных записей.

Тогда я "вставил" в виртуальный CD-ROM Fedora-15-i686-Live-Desktop.iso и запустил Fedora соответственно c LiveCD. Зашёл на жёсткий диск с развернутой Fedora 15, залез в /var/log и посмотрел файл boot.log. Вот его содержимое:

Welcome to Fedora release 15 (Lovelock)!

Starting Collect Read-Ahead Data...
Started Replay Read-Ahead Data.
Starting Bootup hack...
Starting Syslog Kernel Log Buffer Bridge...
Started Syslog Kernel Log Buffer Bridge.
Started Runtime Directory.
Started Lock Directory.
Starting Media Directory...
Started Collect Read-Ahead Data.
Started Bootup hack.
Started Load legacy module configuration.
Starting Remount API VFS...
Started File System Check on Root Device.
Starting Remount Root FS...
Starting Apply System Clock UTC Offset...
Starting Setup Virtual Console...
Started Set Up Additional Binary Formats.
Started Load Kernel Modules.
Starting Apply Kernel Variables...
Starting Stdio Syslog Bridge...
Started Stdio Syslog Bridge.
Started Apply Kernel Variables.
Started Remount Root FS.
Starting Configure read-only root support...
Started Apply System Clock UTC Offset.
Starting udev Kernel Device Manager...
Started Media Directory.
Started Remount API VFS.
Started Configure read-only root support.
Started Setup Virtual Console.
Started udev Kernel Device Manager.
Starting udev Coldplug all Devices...
Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
Started udev Kernel Device Manager.
Starting /dev/mapper/vg_fedora-lv_swap...
Started /dev/mapper/vg_fedora-lv_swap.
Starting File System Check on /dev/disk/by-uuid/6ab4dbde-3c10-4432-b81d-3b397d4f7cf7...
systemd-fsck[546]: /dev/sda1: recovering journal
systemd-fsck[546]: /dev/sda1: clean, 44/128016 files, 88294/512000 blocks
Started File System Check on /dev/disk/by-uuid/6ab4dbde-3c10-4432-b81d-3b397d4f7cf7.
Starting /boot...
Started /boot.
Started udev Wait for Complete Device Initialization.
Starting Wait for storage scan...
Started Show Plymouth Boot Screen.
Started Wait for storage scan.
Starting Initialize storage subsystems (RAID, LVM, etc.)...
Started Initialize storage subsystems (RAID, LVM, etc.).
Starting Initialize storage subsystems (RAID, LVM, etc.)...
Started Initialize storage subsystems (RAID, LVM, etc.).
Started Reconfigure the system on administrator request.
Started Relabel all filesystems, if necessary.
Started Mark the need to relabel after reboot.
Starting Enable all detected swap partitions...
Starting Recreate Volatile Files and Directories...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Load Random Seed...
Started Tell Plymouth To Write Out Runtime Data.
Started Enable all detected swap partitions.
Started Load Random Seed.
Started Recreate Volatile Files and Directories.
Starting Console System Startup Logging...
Starting Restore Sound Card State...
Starting Bootup unhack...
Starting Avahi mDNS/DNS-SD Stack...
Starting Job spooling tools...
Started Job spooling tools.
Starting Network Manager...
Starting ACPI Event Daemon...
Starting ABRT Automated Bug Reporting Tool...
Starting System Logging Service...
Starting SYSV: sandbox, xguest and other apps that want to use pam_namespace require this script be run at boot.  This service script does not actually run any service but sets up: /var/tmp, /tmp and home directories to be used by these tools. If you do not use sandbox, xguest or pam_namespace you can turn this service off....
Starting irqbalance daemon...
Starting Command Scheduler...
Started Command Scheduler.
Starting Self Monitoring and Reporting Technology (SMART) Daemon...
Started Self Monitoring and Reporting Technology (SMART) Daemon.
Starting Machine Check Exception Logging Daemon...
Starting System Setup Keyboard...
Started System Setup Keyboard.
Starting D-Bus System Message Bus...
Started Console System Startup Logging.
Started Restore Sound Card State.
Started Bootup unhack.
Started irqbalance daemon.
Stopping Syslog Kernel Log Buffer Bridge...
Stopped Syslog Kernel Log Buffer Bridge.
Started System Logging Service.
Started ACPI Event Daemon.
Started Machine Check Exception Logging Daemon.
Started D-Bus System Message Bus.
Starting Network Manager failed, see 'systemctl status NetworkManager.service' for details.
Started SYSV: sandbox, xguest and other apps that want to use pam_namespace require this script be run at boot.  This service script does not actually run any service but sets up: /var/tmp, /tmp and home directories to be used by these tools. If you do not use sandbox, xguest or pam_namespace you can turn this service off..
Starting LSB: Port reservation utility...
Starting LSB: Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Starting LSB: start and stop iptables firewall...
Starting LSB: start and stop ip6tables firewall...
Started Avahi mDNS/DNS-SD Stack.
Started ABRT Automated Bug Reporting Tool.
Started LSB: Port reservation utility.
Started LSB: start and stop iptables firewall.
Started LSB: start and stop ip6tables firewall.
Started LSB: Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Starting SYSV: This starts the Linux Auditing System Daemon, which collects security related events in a dedicated audit log. If this daemon is turned off, audit events will be sent to syslog....
Started SYSV: This starts the Linux Auditing System Daemon, which collects security related events in a dedicated audit log. If this daemon is turned off, audit events will be sent to syslog..
Starting LSB: processor frequency scaling support...
Starting LSB: start and stop the nessus daemon...
Starting LSB: start and stop sendmail...
Starting LSB: Start up the OpenSSH server daemon...
Starting LSB: VirtualBox Linux kernel module...
Starting LSB: Start and stop the MD software RAID monitor...
Starting LSB: Mount and unmount network filesystems....
Starting LSB: VirtualBox Linux Additions kernel modules...
Starting LSB: Watches system log for oops messages, creates ABRT dump directories for each oops...
Starting LSB: Installs coredump handler which saves segfault data...
Starting LSB: VirtualBox Linux Additions kernel modules...
Starting LSB: The CUPS scheduler...
Starting /etc/rc.local Compatibility...
Started /etc/rc.local Compatibility.
Starting Wait for Plymouth Boot Screen to Quit...
Started LSB: start and stop the nessus daemon.
Started LSB: Watches system log for oops messages, creates ABRT dump directories for each oops.
Started LSB: Start up the OpenSSH server daemon.
Started LSB: Start and stop the MD software RAID monitor.
Started LSB: VirtualBox Linux kernel module.
Starting LSB: VirtualBox web service API...
Starting LSB: VirtualBox balloon control daemon...
Started LSB: VirtualBox web service API.
Started LSB: VirtualBox balloon control daemon.
Started LSB: Installs coredump handler which saves segfault data.
Starting Network Manager...
Started LSB: processor frequency scaling support.
Started LSB: VirtualBox Linux Additions kernel modules.
Started LSB: The CUPS scheduler.
Starting Network Manager failed, see 'systemctl status NetworkManager.service' for details.
Started LSB: VirtualBox Linux Additions kernel modules.
Starting LSB: VirtualBox Additions service...
Started LSB: start and stop sendmail.
Starting Console Manager...
Started LSB: VirtualBox Additions service.
Starting Console Manager failed, see 'systemctl status console-kit-daemon.service' for details.
Started LSB: Mount and unmount network filesystems..
Starting LSB: Daemon to access a smart card using PC/SC...
Starting Permit User Sessions...
Started Permit User Sessions.
Starting Display Manager...
Started Display Manager.
Started LSB: Daemon to access a smart card using PC/SC.

Честно скажу, что не понимаю на какие проблемы указывает данный log-файл. Догадываюсь, что требуется либо обновить ядро, либо что-то доустановить из пакетов.

Будьте добры, подскажите что мне делать, чтобы загрузить Fedora 15?

Если нужна дополнительная информация, то с радостью напишу. Заранее прошу учесть, что в линуксе я почти полный ноль, посему надеюсь на понимание и адекватные ответы.

2 Ответ от kirillov3798 (22.08.2014 09:13:57 отредактировано kirillov3798)

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

TY3, вряд ли кто-то будет разбираться. На дворе давно Fedora 20 и в скором времени выйдет Fedora 21. Fedora 15 уже года 2 или 3 как не поддерживается. Я советую вам установить последнюю доступную версию.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

3 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

TY3, загрузитесь в Live-режиме и дайте вывод команды

 Консоль: user
[user@linuxforum.tech ~]$ cat /var/log/Xorg.0.log

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

4 Ответ от TY3 (22.08.2014 09:28:03 отредактировано TY3)

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

Я полагаю, проблема, подобная моей, может возникнуть и в более современных ревизиях Fedora. Мне жалко расставаться с Fedora 15. ОС не требовательна к ресурсам, да и в VirtualBox'е мне всё настроил в своё время один опытный админ, в частности настроил графический режим, Gnome и прочие мелочи.

Устанавливал недавно Fedora 19 в VirtualBox'е. Интерфейс неудобный (на рабочем столе пустота вместо ярлыков), всё тормозит, экран мелкий (в VirtualBox надо как-то настраивать графику)... вообщем снёс систему, не смог разобраться.

5 Ответ от stranger

  • stranger
  • stranger
  • Пользователь
  • Неактивен
  • Зарегистрирован: 30.01.2014
  • Сообщений: 2,810
  • Репутация : [ 53 | 4 ]
TY3 пишет:

проблема, подобная моей, может возникнуть и в более современных ревизиях Fedora

Очень маловероятно. Смысл обновлений и заключается, в частности, именно в устранении ошибок и недостатков.

6 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

Пожалуйста, Xorg.0.log

[    45.294] 
X.Org X Server 1.10.2
Release Date: 2011-05-28
[    45.294] X Protocol Version 11, Revision 0
[    45.294] Build Operating System: x86-17 2.6.32-71.14.1.el6.x86_64 
[    45.294] Current Operating System: Linux fedora 2.6.43.8-1.fc15.i686 #1 SMP Mon Jun 4 20:28:56 UTC 2012 i686
[    45.295] Kernel command line: ro root=/dev/mapper/vg_fedora-lv_root rd_LVM_LV=vg_fedora/lv_root rd_LVM_LV=vg_fedora/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=ru_RU.UTF-8 KEYTABLE=ru rhgb quiet
[    45.296] Build Date: 30 May 2011  12:42:31AM
[    45.296] Build ID: xorg-x11-server 1.10.2-1.fc15 
[    45.296] Current version of pixman: 0.20.2
[    45.296]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[    45.296] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    45.298] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 20 11:11:54 2014
[    45.353] (==) Using config file: "/etc/X11/xorg.conf"
[    45.353] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    45.353] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    45.434] (==) No Layout section.  Using the first Screen section.
[    45.434] (**) |-->Screen "Screen[0]" (0)
[    45.434] (**) |   |-->Monitor "Monitor[0]"
[    45.435] (**) |   |-->Device "Device[0]"
[    45.435] (==) Automatically adding devices
[    45.435] (==) Automatically enabling devices
[    45.461] (==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
[    45.461] (==) ModulePath set to "/usr/lib/xorg/modules"
[    45.461] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    45.461] (II) Loader magic: 0x82299a0
[    45.461] (II) Module ABI versions:
[    45.461]     X.Org ANSI C Emulation: 0.4
[    45.461]     X.Org Video Driver: 10.0
[    45.461]     X.Org XInput driver : 12.2
[    45.461]     X.Org Server Extension : 5.0
[    45.467] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216, BIOS @ 0x????????/131072
[    45.467] (II) LoadModule: "extmod"
[    45.532] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    45.542] (II) Module extmod: vendor="X.Org Foundation"
[    45.543]     compiled for 1.10.2, module version = 1.0.0
[    45.543]     Module class: X.Org Server Extension
[    45.543]     ABI class: X.Org Server Extension, version 5.0
[    45.543] (II) Loading extension SELinux
[    45.543] (II) Loading extension MIT-SCREEN-SAVER
[    45.543] (II) Loading extension XFree86-VidModeExtension
[    45.543] (II) Loading extension XFree86-DGA
[    45.543] (II) Loading extension DPMS
[    45.543] (II) Loading extension XVideo
[    45.543] (II) Loading extension XVideo-MotionCompensation
[    45.543] (II) Loading extension X-Resource
[    45.543] (II) LoadModule: "dbe"
[    45.544] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    45.550] (II) Module dbe: vendor="X.Org Foundation"
[    45.550]     compiled for 1.10.2, module version = 1.0.0
[    45.550]     Module class: X.Org Server Extension
[    45.550]     ABI class: X.Org Server Extension, version 5.0
[    45.550] (II) Loading extension DOUBLE-BUFFER
[    45.550] (II) LoadModule: "glx"
[    45.550] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    45.560] (II) Module glx: vendor="X.Org Foundation"
[    45.560]     compiled for 1.10.2, module version = 1.0.0
[    45.560]     ABI class: X.Org Server Extension, version 5.0
[    45.560] (==) AIGLX enabled
[    45.560] (II) Loading extension GLX
[    45.561] (II) LoadModule: "record"
[    45.561] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    45.562] (II) Module record: vendor="X.Org Foundation"
[    45.562]     compiled for 1.10.2, module version = 1.13.0
[    45.562]     Module class: X.Org Server Extension
[    45.562]     ABI class: X.Org Server Extension, version 5.0
[    45.562] (II) Loading extension RECORD
[    45.562] (II) LoadModule: "dri"
[    45.566] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    45.578] (II) Module dri: vendor="X.Org Foundation"
[    45.578]     compiled for 1.10.2, module version = 1.0.0
[    45.578]     ABI class: X.Org Server Extension, version 5.0
[    45.578] (II) Loading extension XFree86-DRI
[    45.578] (II) LoadModule: "dri2"
[    45.578] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    45.580] (II) Module dri2: vendor="X.Org Foundation"
[    45.580]     compiled for 1.10.2, module version = 1.2.0
[    45.580]     ABI class: X.Org Server Extension, version 5.0
[    45.580] (II) Loading extension DRI2
[    45.580] (II) LoadModule: "vboxvideo"
[    45.580] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[    45.594] (II) Module vboxvideo: vendor="Oracle Corporation"
[    45.594]     compiled for 10.10.0, module version = 1.0.1
[    45.594]     Module class: X.Org Video Driver
[    45.594]     ABI class: X.Org Video Driver, version 10.0
[    45.594] (**) Load address of symbol "VBOXVIDEO" is 0xb774a8c0
[    45.594] (II) VBoxVideo: guest driver for VirtualBox: vbox
[    45.594] (++) using VT number 1

[    45.603] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[    45.608] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.3.4
[    45.608] (II) Loading sub module "ramdac"
[    45.608] (II) LoadModule: "ramdac"
[    45.608] (II) Module "ramdac" already built-in
[    45.608] (II) Loading sub module "fb"
[    45.608] (II) LoadModule: "fb"
[    45.608] (II) Loading /usr/lib/xorg/modules/libfb.so
[    45.611] (II) Module fb: vendor="X.Org Foundation"
[    45.611]     compiled for 1.10.2, module version = 1.0.0
[    45.611]     ABI class: X.Org ANSI C Emulation, version 0.4
[    45.611] (II) Loading sub module "shadowfb"
[    45.611] (II) LoadModule: "shadowfb"
[    45.611] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    45.622] (II) Module shadowfb: vendor="X.Org Foundation"
[    45.622]     compiled for 1.10.2, module version = 1.0.0
[    45.622]     ABI class: X.Org ANSI C Emulation, version 0.4
[    45.622] (II) Loading sub module "vgahw"
[    45.622] (II) LoadModule: "vgahw"
[    45.630] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    45.656] (II) Module vgahw: vendor="X.Org Foundation"
[    45.656]     compiled for 1.10.2, module version = 0.1.0
[    45.656]     ABI class: X.Org Video Driver, version 10.0
[    45.656] (II) Loading sub module "dri"
[    45.656] (II) LoadModule: "dri"
[    45.656] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    45.656] (II) Module dri: vendor="X.Org Foundation"
[    45.656]     compiled for 1.10.2, module version = 1.0.0
[    45.656]     ABI class: X.Org Server Extension, version 5.0
[    45.663] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[    45.663] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[    45.663] (**) VBoxVideo(0):  Built-in mode "VBoxInitialMode": 72.6 MHz (scaled from 0.0 MHz), 56.5 kHz, 60.0 Hz
[    45.663] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0   72.61  1280 1282 1284 1286  935 937 939 941 (56.5 kHz)
[    45.663] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 72.6 MHz (scaled from 0.0 MHz), 56.5 kHz, 60.0 Hz
[    45.663] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   72.61  1280 1282 1284 1286  935 937 939 941 (56.5 kHz)
[    45.663] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 72.6 MHz (scaled from 0.0 MHz), 56.5 kHz, 60.0 Hz
[    45.663] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   72.61  1280 1282 1284 1286  935 937 939 941 (56.5 kHz)
[    45.663] (**) VBoxVideo(0):  Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[    45.663] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz)
[    45.663] (**) VBoxVideo(0):  Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[    45.663] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz)
[    45.663] (**) VBoxVideo(0):  Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[    45.663] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz)
[    45.663] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[    45.663] (==) VBoxVideo(0): RGB weight 888
[    45.663] (==) VBoxVideo(0): Default visual is TrueColor
[    45.663] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[    45.663] (==) VBoxVideo(0): DPI set to (96, 96)
[    45.663] (--) Depth 24 pixmap format is 32 bpp
[    46.986] drmOpenDevice: node name is /dev/dri/card0
[    46.986] drmOpenDevice: open result is 11, (OK)
[    46.986] drmOpenDevice: node name is /dev/dri/card0
[    46.986] drmOpenDevice: open result is 11, (OK)
[    46.986] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    46.986] drmOpenDevice: node name is /dev/dri/card0
[    46.986] drmOpenDevice: open result is 11, (OK)
[    46.986] drmOpenByBusid: drmOpenMinor returns 11
[    46.986] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    46.986] (II) [drm] DRM interface version 1.4
[    46.992] (II) [drm] DRM open master succeeded.
[    46.992] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[    46.992] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[    46.992] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[    46.992] (II) VBoxVideo(0): X context handle = 0x1
[    46.992] (II) VBoxVideo(0): [drm] installed DRM signal handler
[    46.992] (II) VBoxVideo(0): visual configurations initialized
[    47.008] (II) VBoxVideo(0): Requested monitor count: 1
[    47.015] (II) VBoxVideo(0): Output VBOX0 using monitor section Monitor[0]
[    47.015] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[    47.016] (II) VBoxVideo(0): EDID for output VBOX0
[    47.016] (II) VBoxVideo(0): Manufacturer: VBX  Model: 0  Serial#: 61277440
[    47.016] (II) VBoxVideo(0): Year: 1990  Week: 1
[    47.016] (II) VBoxVideo(0): EDID Version: 1.3
[    47.016] (II) VBoxVideo(0): Digital Display Input
[    47.016] (II) VBoxVideo(0): Indeterminate output size
[    47.016] (II) VBoxVideo(0): Gamma: 2.20
[    47.016] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[    47.016] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    47.016] (II) VBoxVideo(0): Default color space is primary color space
[    47.016] (II) VBoxVideo(0): First detailed timing is preferred mode
[    47.016] (II) VBoxVideo(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    47.016] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    47.016] (II) VBoxVideo(0): Manufacturer's mask: 0
[    47.016] (II) VBoxVideo(0): Supported detailed timing:
[    47.016] (II) VBoxVideo(0): clock: 72.6 MHz   Image Size:  0 x 0 mm
[    47.016] (II) VBoxVideo(0): h_active: 1280  h_sync: 1282  h_sync_end 1284 h_blank_end 1286 h_border: 0
[    47.016] (II) VBoxVideo(0): v_active: 935  v_sync: 937  v_sync_end 939 v_blanking: 941 v_border: 0
[    47.016] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[    47.016] (II) VBoxVideo(0): Monitor name: VBOX monitor
[    47.016] (II) VBoxVideo(0): EDID (in hex):
[    47.016] (II) VBoxVideo(0):     00ffffffffffff00585800000005a703
[    47.016] (II) VBoxVideo(0):     0100010380000078eeee91a3544c9926
[    47.016] (II) VBoxVideo(0):     0f505400000001010101010101010101
[    47.016] (II) VBoxVideo(0):     0101010101015c1c000650a706300202
[    47.016] (II) VBoxVideo(0):     2200000000000000000000fd0000c800
[    47.016] (II) VBoxVideo(0):     c864000a202020202020000000fc0056
[    47.016] (II) VBoxVideo(0):     424f58206d6f6e69746f720a00000010
[    47.016] (II) VBoxVideo(0):     000a20202020202020202020202000e5
[    47.016] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    47.016] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[    47.016] (II) VBoxVideo(0): Using hsync ranges from config file
[    47.016] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    47.016] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    47.016] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[    47.020] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[    47.020] (II) VBoxVideo(0): Modeline "1280x935"x60.0   72.61  1280 1282 1284 1286  935 937 939 941 (56.5 kHz)
[    47.020] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz)
[    47.020] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz)
[    47.020] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz)
[    47.020] (II) VBoxVideo(0): Output VBOX0 connected
[    47.020] (II) VBoxVideo(0): Using exact sizes for initial modes
[    47.020] (II) VBoxVideo(0): Output VBOX0 using initial mode 1280x935 +0+0
[    47.020] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    47.020] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    47.025] (==) VBoxVideo(0): DPMS enabled
[    47.025] (II) VBoxVideo(0): [DRI] installation complete
[    47.025] (--) RandR disabled
[    47.025] (II) Initializing built-in extension Generic Event Extension
[    47.025] (II) Initializing built-in extension SHAPE
[    47.025] (II) Initializing built-in extension MIT-SHM
[    47.025] (II) Initializing built-in extension XInputExtension
[    47.025] (II) Initializing built-in extension XTEST
[    47.025] (II) Initializing built-in extension BIG-REQUESTS
[    47.025] (II) Initializing built-in extension SYNC
[    47.025] (II) Initializing built-in extension XKEYBOARD
[    47.025] (II) Initializing built-in extension XC-MISC
[    47.025] (II) Initializing built-in extension XINERAMA
[    47.025] (II) Initializing built-in extension XFIXES
[    47.025] (II) Initializing built-in extension RENDER
[    47.025] (II) Initializing built-in extension RANDR
[    47.025] (II) Initializing built-in extension COMPOSITE
[    47.025] (II) Initializing built-in extension DAMAGE
[    47.032] (II) SELinux: Disabled by boolean
[    47.043] (II) AIGLX: Screen 0 is not DRI2 capable
[    47.043] drmOpenDevice: node name is /dev/dri/card0
[    47.043] drmOpenDevice: open result is 12, (OK)
[    47.043] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    47.043] drmOpenDevice: node name is /dev/dri/card0
[    47.043] drmOpenDevice: open result is 12, (OK)
[    47.043] drmOpenByBusid: drmOpenMinor returns 12
[    47.043] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[    47.043] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    47.112] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[    47.112] (II) The file referenced, is *NOT* loaded
[    47.112] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[    47.112] (EE) AIGLX error: vboxvideo does not export required DRI extension
[    47.112] (EE) AIGLX: reverting to software rendering
[    47.798] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[    47.800] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    47.801] (II) VBoxVideo(0): Setting screen physical size to 338 x 247
[    48.487] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    48.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    48.487] (**) Power Button: Applying InputClass "system-setup-keyboard"
[    48.487] (II) LoadModule: "evdev"
[    48.488] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    48.531] (II) Module evdev: vendor="X.Org Foundation"
[    48.531]     compiled for 1.10.0, module version = 2.6.0
[    48.531]     Module class: X.Org XInput Driver
[    48.531]     ABI class: X.Org XInput driver, version 12.2
[    48.531] (II) Using input driver 'evdev' for 'Power Button'
[    48.531] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    48.533] (**) Power Button: always reports core events
[    48.533] (**) Power Button: Device: "/dev/input/event0"
[    48.533] (--) Power Button: Found keys
[    48.533] (II) Power Button: Configuring as keyboard
[    48.533] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[    48.533] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    48.533] (**) Option "xkb_rules" "evdev"
[    48.533] (**) Option "xkb_model" "pc105"
[    48.533] (**) Option "xkb_layout" "ru,us"
[    48.533] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[    48.744] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    48.744] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    48.744] (**) Sleep Button: Applying InputClass "system-setup-keyboard"
[    48.744] (II) Using input driver 'evdev' for 'Sleep Button'
[    48.744] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    48.744] (**) Sleep Button: always reports core events
[    48.746] (**) Sleep Button: Device: "/dev/input/event1"
[    48.746] (--) Sleep Button: Found keys
[    48.746] (II) Sleep Button: Configuring as keyboard
[    48.746] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[    48.746] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    48.746] (**) Option "xkb_rules" "evdev"
[    48.746] (**) Option "xkb_model" "pc105"
[    48.746] (**) Option "xkb_layout" "ru,us"
[    48.746] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[    48.754] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event5)
[    48.754] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[    48.754] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[    48.754] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    48.754] (**) VirtualBox mouse integration: always reports core events
[    48.754] (**) VirtualBox mouse integration: Device: "/dev/input/event5"
[    48.755] (--) VirtualBox mouse integration: Found 1 mouse buttons
[    48.755] (--) VirtualBox mouse integration: Found absolute axes
[    48.755] (--) VirtualBox mouse integration: Found x and y absolute axes
[    48.755] (II) VirtualBox mouse integration: Configuring as mouse
[    48.755] (**) VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[    48.755] (**) VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    48.755] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input5/event5"
[    48.755] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE)
[    48.755] (II) VirtualBox mouse integration: initialized for absolute axes.
[    48.755] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[    48.755] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[    48.755] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[    48.755] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[    48.757] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[    48.757] (II) No input driver/identifier specified (ignoring)
[    48.761] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event4)
[    48.761] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[    48.761] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[    48.761] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    48.761] (**) VirtualBox USB Tablet: always reports core events
[    48.761] (**) VirtualBox USB Tablet: Device: "/dev/input/event4"
[    48.761] (--) VirtualBox USB Tablet: Found 9 mouse buttons
[    48.761] (--) VirtualBox USB Tablet: Found scroll wheel(s)
[    48.761] (--) VirtualBox USB Tablet: Found relative axes
[    48.761] (--) VirtualBox USB Tablet: Found absolute axes
[    48.761] (--) VirtualBox USB Tablet: Found x and y absolute axes
[    48.761] (II) VirtualBox USB Tablet: Configuring as mouse
[    48.763] (II) VirtualBox USB Tablet: Adding scrollwheel support
[    48.763] (**) VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[    48.763] (**) VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    48.763] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input4/event4"
[    48.763] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE)
[    48.763] (EE) VirtualBox USB Tablet: failed to initialize for relative axes.
[    48.763] (II) VirtualBox USB Tablet: initialized for absolute axes.
[    48.763] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[    48.763] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[    48.763] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[    48.763] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[    48.763] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[    48.763] (II) No input driver/identifier specified (ignoring)
[    48.764] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[    48.764] (II) No input driver/identifier specified (ignoring)
[    48.767] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    48.767] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    48.767] (**) AT Translated Set 2 keyboard: Applying InputClass "system-setup-keyboard"
[    48.767] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    48.767] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    48.767] (**) AT Translated Set 2 keyboard: always reports core events
[    48.767] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    48.767] (--) AT Translated Set 2 keyboard: Found keys
[    48.767] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    48.767] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    48.767] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    48.767] (**) Option "xkb_rules" "evdev"
[    48.767] (**) Option "xkb_model" "pc105"
[    48.767] (**) Option "xkb_layout" "ru,us"
[    48.767] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[    48.767] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event3)
[    48.767] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[    48.767] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[    48.767] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    48.767] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[    48.767] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event3"
[    48.767] (--) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[    48.767] (--) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[    48.767] (--) ImExPS/2 Generic Explorer Mouse: Found relative axes
[    48.767] (--) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[    48.767] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[    48.774] (II) ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[    48.774] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[    48.774] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    48.774] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event3"
[    48.774] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
[    48.775] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[    48.775] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[    48.775] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[    48.775] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[    48.775] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[    48.776] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[    48.776] (II) No input driver/identifier specified (ignoring)
[    48.856] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    48.856] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[    48.856] (II) VBoxVideo(0): Using hsync ranges from config file
[    48.856] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    48.856] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    48.856] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[    53.278] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    53.279] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[    53.279] (II) VBoxVideo(0): Using hsync ranges from config file
[    53.279] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    53.279] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    53.279] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[    53.284] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    53.284] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[    53.284] (II) VBoxVideo(0): Using hsync ranges from config file
[    53.284] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    53.284] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    53.284] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[    53.297] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    53.297] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[    53.297] (II) VBoxVideo(0): Using hsync ranges from config file
[    53.297] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    53.297] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    53.297] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[    53.299] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    53.299] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[    53.299] (II) VBoxVideo(0): Using hsync ranges from config file
[    53.299] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    53.299] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    53.299] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[   263.235] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   263.238] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[   263.238] (II) VBoxVideo(0): Using hsync ranges from config file
[   263.238] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   263.238] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   263.238] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[   263.249] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   263.249] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[   263.249] (II) VBoxVideo(0): Using hsync ranges from config file
[   263.249] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   263.249] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   263.249] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[   263.277] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   263.277] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[   263.277] (II) VBoxVideo(0): Using hsync ranges from config file
[   263.277] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   263.277] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   263.277] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[   263.393] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   263.393] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[   263.393] (II) VBoxVideo(0): Using hsync ranges from config file
[   263.393] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   263.393] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   263.393] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[   268.425] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   268.425] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[   268.425] (II) VBoxVideo(0): Using hsync ranges from config file
[   268.425] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   268.425] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   268.425] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[  1232.028] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[  1232.030] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[  1232.030] (II) VBoxVideo(0): Using hsync ranges from config file
[  1232.030] (II) VBoxVideo(0): Using vrefresh ranges from config file
[  1232.030] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[  1232.030] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[  2936.147] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[  2936.147] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[  2936.147] (II) VBoxVideo(0): Using hsync ranges from config file
[  2936.147] (II) VBoxVideo(0): Using vrefresh ranges from config file
[  2936.147] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[  2936.147] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)
[ 19878.628] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 19878.675] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1280x935 Warning: We only handle separate sync.
[ 19878.675] (II) VBoxVideo(0): Using hsync ranges from config file
[ 19878.675] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 19878.675] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 19878.676] (II) VBoxVideo(0): Modeline "1280x935"x0.0   72.60  1280 1282 1284 1286  935 937 939 941 -hsync -vsync (56.5 kHz)

7 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]
TY3 пишет:

Устанавливал недавно Fedora 19 в VirtualBox'е. Интерфейс неудобный (на рабочем столе пустота вместо ярлыков), всё тормозит, экран мелкий (в VirtualBox надо как-то настраивать графику)... вообщем снёс система, не смог разобраться.

Так вы поставили Fedora вместе с GNOME 3. А там при установке можно выбрать разные DE (KDE, MATE (форк GNOME 2), Xfce, Cinnamon (альтернативное развитие GNOME 3), GNOME 3). GNOME3 будет тормозить на виртуалке, так как ему необходимо 3D ускорение должного уровня.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

8 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

Всё верно, не надо мучить труп. Ни кто не будет разбираться с проблемами неподдерживаемой древней версии дистрибутива.
В современном Virtualbox современные Федоры (19 20) работают без проблем.

И велика вероятность, что ты просто что-то сломал в системе, удаляя "ненужные" пакеты.

Сайт Vascom

9 Ответ от TY3 (22.08.2014 10:05:39 отредактировано TY3)

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

То, что я что-то сломал в системе, уже свершившийся факт, а не вероятность. В противном случае, система бы загрузилась.

Что ж, спрошу следующее.
Можно ли без или с использованием LiveCD, обновить ядро и пакеты Fedora 15?

Поясню. Без LiveCD я не имею доступа к терминалу, по-крайней мере, я не знаю как с экрана загрузки или до загрузки запустить терминал. С LiveCD я логинюсь под Live System User и могу перейти, через su -, в режим root. Проблема в том, что этот root является root'ом LiveCD и не является root'ом моей установленной Fedora. Команды которые я ввожу, например, yum update kernel или yum update, как я подозреваю, выполняются лишь для LiveOS, но не для моей установленной Fedora 15. Соответственно, после перезагрузки, все накатанные обновления и прочее, испаряются.

10 Ответ от stranger

  • stranger
  • stranger
  • Пользователь
  • Неактивен
  • Зарегистрирован: 30.01.2014
  • Сообщений: 2,810
  • Репутация : [ 53 | 4 ]
TY3 пишет:

до загрузки запустить терминал

А зачем ДО загрузки?

11 Ответ от Vascom

  • Vascom
  • Vascom
  • Пользователь
  • Неактивен
  • Откуда: Moscow
  • Зарегистрирован: 02.04.2010
  • Сообщений: 4,535
  • Репутация : [ 189 | 2 ]

Тогда покажи содержимое /var/log/yum.log
Хоть посмотрим что ты удалил.

Сайт Vascom

12 Ответ от kirillov3798 (22.08.2014 10:12:24 отредактировано kirillov3798)

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

TY3, загрузившись с LiveCD Fedora 15, нужно примонтировать корень в папку /mnt. Сделать это можно следующей командой:

 Консоль: root
[root@linuxforum.ru ~]# mount /dev/sdaX /mnt

где /dev/sdaX - корневой раздел на виртуальном диске VM.
Дальше выполнить chroot:
 Консоль: root
[root@linuxforum.ru ~]# chroot /mnt

А дальше можешь уже выполнять "yum update" и прочее.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

13 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]
Vascom пишет:

Тогда покажи содержимое /var/log/yum.log
Хоть посмотрим что ты удалил.

yum.log закрыт для просмотра. Скорее всего, можно глянуть только из под рута.

kirillov3798 пишет:

где /dev/sdaX - корневой раздел на виртуальном диске VM.

Можно чуть доступнее.
Ввожу mount /dev/sdaX /mnt в ответ mount: special device /dev/sdaX does not exist

Как посмотреть наименование корневого раздела на виртуальном диске VM?

14 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]
TY3 пишет:

Как посмотреть наименование корневого раздела на виртуальном диске VM?

Выполните команду lsblk -f и дойте вывод сюда.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

15 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

Не заметил.

stranger пишет:

А зачем ДО загрузки?

Чтобы накатить обновления ядра и пакетов, сделать reboot и возможно удачно запуститься. Если подскажите как после загрузки или в момент загрузки обратиться к терминалу, будет отлично.

16 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]
kirillov3798 пишет:

Выполните команду lsblk -f и дойте вывод сюда.

Сделаю. Немного позже... сейчас на работе, с Fedora разбираюсь факультативно...

17 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

С получением информации из LiveCD проблемно... copy-past не работает, нет общих папок, приходится передавать информацию через e-mail и публиковать уже здесь на форуме из хостовой машины.

Вот вывод lsblk -f:

NAME                         FSTYPE   LABEL                           MOUNTPOINT
loop0                        squashfs                                 
loop1                        DM_snaps                                 
└─live-osimg-min (dm-1)      ext4     _Fedora-15-i686-               
loop2                        squashfs                                 
loop3                        ext4     _Fedora-15-i686-               
├─live-rw (dm-0)             ext4     _Fedora-15-i686-                /
└─live-osimg-min (dm-1)      ext4     _Fedora-15-i686-               
loop4                        DM_snaps                                 
└─live-rw (dm-0)             ext4     _Fedora-15-i686-                /
sda                                                                   
├─sda1                       ext4                                     /media/6ab
└─sda2                       LVM2_mem                                 
  ├─vg_fedora-lv_swap (dm-2) swap                                     [SWAP]
  └─vg_fedora-lv_root (dm-3) ext4                                     /media/9d0
sr0                          iso9660  Fedora-15-i686-Live-Desktop.iso /run/initr

18 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

Выполнил mount /dev/sda1 /mnt . В ответ ничего, следовательно всё правильно.
Выполнил chroot /mnt в ответ: chroot: failed to run command '/bin/bash' : No such file or directory

19 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

TY3, после chroot'а выполните команду "ls -la /mnt; ls -la /mnt/bin" и дайте вывод

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

20 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]
kirillov3798 пишет:

TY3, после chroot'а выполните команду "ls -la /mnt; ls -la /mnt/bin" и дайте вывод

Вывод:
chroot: cannot change root directory to ls: No such file or directory
ls: cannot access /mnt/bin: No such file or directory

Вводил:
chroot ls -la /mnt; ls -la /mnt/bin
также пробовал по отдельности
chroot ls -la /mnt
chroot ls -la /mnt/bin

21 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

TY3, вы не поняли. Я имел ввиду "chroot /mnt" и "ls -la /mnt; ls -la /mnt/bin" выполнить отдельно.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

22 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

Понял.

[root@localhost ~]# ls -la /mnt
total 61099
dr-xr-xr-x.  5 root root     1024 Nov 28  2013 .
dr-xr-xr-x. 23 root root     4096 Aug 22 06:20 ..
-rw-r--r--.  1 root root   120086 May  9  2011 config-2.6.38.6-26.rc1.fc15.i686
-rw-r--r--.  1 root root   120082 May 15  2011 config-2.6.38.6-27.fc15.i686
-rw-r--r--.  1 root root   125204 Jun  4  2012 config-2.6.43.8-1.fc15.i686
drwxr-xr-x.  3 root root     1024 Jun  6  2011 efi
drwxr-xr-x.  2 root root     1024 Nov 28  2013 grub
-rw-r--r--.  1 root root 14274756 Jun  6  2011 initramfs-2.6.38.6-26.rc1.fc15.i686.img
-rw-r--r--.  1 root root 14274243 Jun  6  2011 initramfs-2.6.38.6-27.fc15.i686.img
-rw-r--r--.  1 root root 15681176 Nov 28  2013 initramfs-2.6.43.8-1.fc15.i686.img
drwx------.  2 root root    12288 Jun  6  2011 lost+found
-rw-------.  1 root root  1852227 May  9  2011 System.map-2.6.38.6-26.rc1.fc15.i686
-rw-------.  1 root root  1852227 May 15  2011 System.map-2.6.38.6-27.fc15.i686
-rw-------.  1 root root  1908430 Jun  4  2012 System.map-2.6.43.8-1.fc15.i686
-rwxr-xr-x.  1 root root  3804304 May  9  2011 vmlinuz-2.6.38.6-26.rc1.fc15.i686
-rwxr-xr-x.  1 root root  3804368 May 15  2011 vmlinuz-2.6.38.6-27.fc15.i686
-rwxr-xr-x.  1 root root  4706256 Jun  4  2012 vmlinuz-2.6.43.8-1.fc15.i686

[root@localhost ~]# ls -la /mnt/bin
ls: cannot access /mnt/bin: No such file or directory

23 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

Вдогонку

[root@localhost ~]# chroot /mnt
chroot: failed to run command `/bin/bash': No such file or directory

24 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

TY3, хорошо. Выполните в консоли команды:
1.

 Консоль:
exit

2.
 Консоль:
ls -la /dev/mapper/

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

25 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]

[root@localhost ~]# exit
logout
[liveuser@localhost ~]$ ls -la /dev/mapper
total 0
drwxr-xr-x.  2 root root     140 Aug 22 04:40 .
drwxr-xr-x. 18 root root    3620 Aug 22 04:40 ..
crw-------.  1 root root 10, 236 Aug 22 04:40 control
lrwxrwxrwx.  1 root root       7 Aug 22 04:40 live-osimg-min -> ../dm-1
lrwxrwxrwx.  1 root root       7 Aug 22 04:40 live-rw -> ../dm-0
lrwxrwxrwx.  1 root root       7 Aug 22 04:40 vg_fedora-lv_root -> ../dm-3
lrwxrwxrwx.  1 root root       7 Aug 22 04:40 vg_fedora-lv_swap -> ../dm-2

26 Ответ от kirillov3798 (22.08.2014 11:22:36 отредактировано kirillov3798)

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

TY3, выполните

 Консоль:
su -c "umount /dev/sda1; mount /dev/mapper/vg_fedora-lv_root /mnt"

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

27 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

TY3, если предыдущая команда не выдала ошибок сделайте

 Консоль:
chroot /mnt

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

28 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]
kirillov3798 пишет:

TY3, выполните
Консоль
su -c "umount /dev/sda1; mount /dev/mapper/vg_fedora-lv_root /mnt"

Выполнил, в ответ только приглашению к вводу следующей команды. Я так понял, ошибок нет и компанда su -c... выполнилась.

29 Ответ от TY3

  • TY3
  • Новичок
  • Неактивен
  • Зарегистрирован: 22.08.2014
  • Сообщений: 18
  • Репутация : [ 0 | 0 ]
kirillov3798 пишет:

TY3, если предыдущая команда не выдала ошибок сделайте
Консоль
chroot /mnt

[liveuser@localhost ~]$ su -c "umount /dev/sda1; mount /dev/mapper/vg_fedora-lv_root /mnt"
[liveuser@localhost ~]$ chroot /mnt
chroot: cannot change root directory to /mnt: Operation not permitted
[liveuser@localhost ~]$

30 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

TY3,

 Консоль:
su -c "chroot /mnt"

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD