• Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

Только что поставил Fedora 21. Подключил репозитории rpmfusion (free и nonfree), russianfedora (free, nonfree, fixes). Обновился (исключил при обновлении kernel*, так как под последнее ядро в Fedora нет модуля nvidia). Поставил kmod-nvidia, xorg-x11-drv-nvidia-libs.i686, выполнил команду nvidia-xconfig, перезагрузился и получил сюрприз в виде черного экрана. Попробовал удалить xorg.conf, сгенерированный вышеуказанной командой и после перезагрузки все встало на свои места. Вот только не могу понять, в чем была проблема?
Вот Xorg.0.log без xorg.conf:

+ открыть спойлер
[    13.862] 
X.Org X Server 1.16.2
Release Date: 2014-11-10
[    13.862] X Protocol Version 11, Revision 0
[    13.862] Build Operating System:  3.17.2-200.fc20.x86_64 
[    13.862] Current Operating System: Linux localhost.localdomain 3.17.4-301.fc21.x86_64 #1 SMP Thu Nov 27 19:09:10 UTC 2014 x86_64
[    13.863] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17.4-301.fc21.x86_64 root=/dev/sda2 ro rhgb quiet LANG=ru_RU.UTF-8 nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off
[    13.863] Build Date: 21 November 2014  01:15:20AM
[    13.863] Build ID: xorg-x11-server 1.16.2-1.fc21 
[    13.863] Current version of pixman: 0.32.6
[    13.863]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    13.863] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.863] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 14 10:16:09 2014
[    13.863] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.863] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    13.863] (==) No Layout section.  Using the first Screen section.
[    13.863] (==) No screen section available. Using defaults.
[    13.863] (**) |-->Screen "Default Screen Section" (0)
[    13.863] (**) |   |-->Monitor "<default monitor>"
[    13.863] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    13.863] (==) Automatically adding devices
[    13.863] (==) Automatically enabling devices
[    13.863] (==) Automatically adding GPU devices
[    13.863] (==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
[    13.863] (**) ModulePath set to "/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[    13.863] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    13.863] (II) Loader magic: 0x81de40
[    13.863] (II) Module ABI versions:
[    13.863]     X.Org ANSI C Emulation: 0.4
[    13.863]     X.Org Video Driver: 18.0
[    13.863]     X.Org XInput driver : 21.0
[    13.863]     X.Org Server Extension : 8.0
[    13.866] (EE) systemd-logind: failed to get session: PID 881 does not belong to any known session
[    13.866] (II) xfree86: Adding drm device (/dev/dri/card0)
[    13.867] (--) PCI:*(0:1:0:0) 10de:11c0:1458:354e rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    13.867] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    13.867] (II) "glx" will be loaded by default.
[    13.867] (II) LoadModule: "glx"
[    14.032] (II) Loading /usr/lib64/nvidia/xorg/libglx.so
[    15.442] (II) Module glx: vendor="NVIDIA Corporation"
[    15.458]     compiled for 4.0.2, module version = 1.0.0
[    15.458]     Module class: X.Org Server Extension
[    15.465] (II) NVIDIA GLX Module  343.22  Thu Sep 11 15:55:13 PDT 2014
[    15.558] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    15.558]     loading driver: nvidia
[    15.558] (==) Matched nvidia as autoconfigured driver 0
[    15.558] (==) Matched nouveau as autoconfigured driver 1
[    15.558] (==) Matched nv as autoconfigured driver 2
[    15.558] (==) Matched nouveau as autoconfigured driver 3
[    15.558] (==) Matched nv as autoconfigured driver 4
[    15.558] (==) Matched modesetting as autoconfigured driver 5
[    15.558] (==) Matched fbdev as autoconfigured driver 6
[    15.558] (==) Matched vesa as autoconfigured driver 7
[    15.558] (==) Assigned the driver to the xf86ConfigLayout
[    15.558] (II) LoadModule: "nvidia"
[    15.559] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    15.559] (II) Module nvidia: vendor="NVIDIA Corporation"
[    15.559]     compiled for 4.0.2, module version = 1.0.0
[    15.559]     Module class: X.Org Video Driver
[    15.559] (II) LoadModule: "nouveau"
[    15.559] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[    15.578] (II) Module nouveau: vendor="X.Org Foundation"
[    15.578]     compiled for 1.16.1, module version = 1.0.11
[    15.578]     Module class: X.Org Video Driver
[    15.578]     ABI class: X.Org Video Driver, version 18.0
[    15.578] (II) LoadModule: "nv"
[    15.578] (WW) Warning, couldn't open module nv
[    15.578] (II) UnloadModule: "nv"
[    15.578] (II) Unloading nv
[    15.578] (EE) Failed to load module "nv" (module does not exist, 0)
[    15.578] (II) LoadModule: "modesetting"
[    15.578] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    15.609] (II) Module modesetting: vendor="X.Org Foundation"
[    15.628]     compiled for 1.16.0, module version = 0.9.0
[    15.628]     Module class: X.Org Video Driver
[    15.628]     ABI class: X.Org Video Driver, version 18.0
[    15.628] (II) LoadModule: "fbdev"
[    15.628] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    15.665] (II) Module fbdev: vendor="X.Org Foundation"
[    15.665]     compiled for 1.16.0, module version = 0.4.3
[    15.665]     Module class: X.Org Video Driver
[    15.665]     ABI class: X.Org Video Driver, version 18.0
[    15.665] (II) LoadModule: "vesa"
[    15.665] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    15.677] (II) Module vesa: vendor="X.Org Foundation"
[    15.692]     compiled for 1.16.0, module version = 2.3.2
[    15.692]     Module class: X.Org Video Driver
[    15.692]     ABI class: X.Org Video Driver, version 18.0
[    15.692] (II) NVIDIA dlloader X Driver  343.22  Thu Sep 11 15:34:47 PDT 2014
[    15.692] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    15.692] (II) NOUVEAU driver 
[    15.692] (II) NOUVEAU driver for NVIDIA chipset families :
[    15.692]     RIVA TNT        (NV04)
[    15.693]     RIVA TNT2       (NV05)
[    15.693]     GeForce 256     (NV10)
[    15.693]     GeForce 2       (NV11, NV15)
[    15.693]     GeForce 4MX     (NV17, NV18)
[    15.693]     GeForce 3       (NV20)
[    15.693]     GeForce 4Ti     (NV25, NV28)
[    15.693]     GeForce FX      (NV3x)
[    15.693]     GeForce 6       (NV4x)
[    15.693]     GeForce 7       (G7x)
[    15.693]     GeForce 8       (G8x)
[    15.693]     GeForce GTX 200 (NVA0)
[    15.693]     GeForce GTX 400 (NVC0)
[    15.693] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    15.693] (II) FBDEV: driver for framebuffer: fbdev
[    15.693] (II) VESA: driver for VESA chipsets: vesa
[    15.693] (++) using VT number 1

[    15.696] (II) Loading sub module "fb"
[    15.696] (II) LoadModule: "fb"
[    15.696] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    15.696] (II) Module fb: vendor="X.Org Foundation"
[    15.696]     compiled for 1.16.2, module version = 1.0.0
[    15.696]     ABI class: X.Org ANSI C Emulation, version 0.4
[    15.696] (II) Loading sub module "wfb"
[    15.696] (II) LoadModule: "wfb"
[    15.696] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    15.696] (II) Module wfb: vendor="X.Org Foundation"
[    15.696]     compiled for 1.16.2, module version = 1.0.0
[    15.696]     ABI class: X.Org ANSI C Emulation, version 0.4
[    15.696] (II) Loading sub module "ramdac"
[    15.696] (II) LoadModule: "ramdac"
[    15.696] (II) Module "ramdac" already built-in
[    15.697] (WW) Falling back to old probe method for modesetting
[    15.697] (WW) Falling back to old probe method for fbdev
[    15.697] (II) Loading sub module "fbdevhw"
[    15.697] (II) LoadModule: "fbdevhw"
[    15.697] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    15.742] (II) Module fbdevhw: vendor="X.Org Foundation"
[    15.742]     compiled for 1.16.2, module version = 0.0.2
[    15.742]     ABI class: X.Org Video Driver, version 18.0
[    15.742] (WW) Falling back to old probe method for vesa
[    15.742] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    15.742] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    15.742] (==) NVIDIA(0): RGB weight 888
[    15.742] (==) NVIDIA(0): Default visual is TrueColor
[    15.742] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.742] (**) NVIDIA(0): Enabling 2D acceleration
[    16.357] (II) NVIDIA(0): Display (LG Electronics IPS236 (DFP-3)) does not support
[    16.357] (II) NVIDIA(0):     NVIDIA 3D Vision stereo.
[    16.357] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    16.358] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[    16.358] (--) NVIDIA(0): Memory: 2097152 kBytes
[    16.358] (--) NVIDIA(0): VideoBIOS: 80.06.10.00.3d
[    16.358] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    16.365] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[    16.365] (--) NVIDIA(0):     CRT-0
[    16.365] (--) NVIDIA(0):     DFP-0
[    16.365] (--) NVIDIA(0):     DFP-1
[    16.365] (--) NVIDIA(0):     DFP-2
[    16.365] (--) NVIDIA(0):     LG Electronics IPS236 (DFP-3) (boot, connected)
[    16.365] (--) NVIDIA(0):     DFP-4
[    16.365] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    16.365] (--) NVIDIA(0): DFP-0: Internal TMDS
[    16.365] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    16.365] (--) NVIDIA(0): DFP-1: Internal TMDS
[    16.365] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    16.365] (--) NVIDIA(0): DFP-2: Internal TMDS
[    16.365] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[    16.365] (--) NVIDIA(0): LG Electronics IPS236 (DFP-3): Internal TMDS
[    16.365] (--) NVIDIA(GPU-0): LG Electronics IPS236 (DFP-3): 330.0 MHz maximum pixel clock
[    16.365] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[    16.365] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    16.365] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    16.365] (**) NVIDIA(0):     device LG Electronics IPS236 (DFP-3) (Using EDID
[    16.365] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    16.366] (==) NVIDIA(0): 
[    16.366] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    16.366] (==) NVIDIA(0):     will be used as the requested mode.
[    16.366] (==) NVIDIA(0): 
[    16.366] (II) NVIDIA(0): Validated MetaModes:
[    16.367] (II) NVIDIA(0):     "DFP-3:nvidia-auto-select"
[    16.367] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    16.404] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[    16.404] (--) NVIDIA(0):     option
[    16.404] (II) UnloadModule: "nouveau"
[    16.404] (II) Unloading nouveau
[    16.404] (II) UnloadModule: "modesetting"
[    16.404] (II) Unloading modesetting
[    16.404] (II) UnloadModule: "fbdev"
[    16.404] (II) Unloading fbdev
[    16.404] (II) UnloadSubModule: "fbdevhw"
[    16.404] (II) Unloading fbdevhw
[    16.404] (II) UnloadModule: "vesa"
[    16.404] (II) Unloading vesa
[    16.404] (--) Depth 24 pixmap format is 32 bpp
[    16.404] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    16.404] (II) NVIDIA:     access.
[    16.407] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    16.407] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    16.407] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    16.407] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    16.407] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    16.407] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    16.407] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    16.407] (II) NVIDIA(0):     Config Options in the README.
[    16.414] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select"
[    16.472] (==) NVIDIA(0): Disabling shared memory pixmaps
[    16.472] (==) NVIDIA(0): Backing store enabled
[    16.472] (==) NVIDIA(0): Silken mouse enabled
[    16.472] (==) NVIDIA(0): DPMS enabled
[    16.473] (II) Loading sub module "dri2"
[    16.473] (II) LoadModule: "dri2"
[    16.473] (II) Module "dri2" already built-in
[    16.473] (II) NVIDIA(0): [DRI2] Setup complete
[    16.473] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    16.473] (--) RandR disabled
[    16.476] (II) SELinux: Disabled by boolean
[    16.477] (II) Initializing extension GLX
[    16.603] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    16.604] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.604] (**) Power Button: Applying InputClass "system-keyboard"
[    16.604] (II) LoadModule: "evdev"
[    16.604] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    16.604] (II) Module evdev: vendor="X.Org Foundation"
[    16.604]     compiled for 1.16.0, module version = 2.9.0
[    16.604]     Module class: X.Org XInput Driver
[    16.604]     ABI class: X.Org XInput driver, version 21.0
[    16.604] (II) Using input driver 'evdev' for 'Power Button'
[    16.604] (**) Power Button: always reports core events
[    16.604] (**) evdev: Power Button: Device: "/dev/input/event1"
[    16.604] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.604] (--) evdev: Power Button: Found keys
[    16.604] (II) evdev: Power Button: Configuring as keyboard
[    16.604] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    16.604] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    16.604] (**) Option "xkb_rules" "evdev"
[    16.604] (**) Option "xkb_model" "pc104"
[    16.604] (**) Option "xkb_layout" "us,ru"
[    16.604] (**) Option "xkb_variant" ","
[    16.604] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    16.626] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    16.626] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.626] (**) Power Button: Applying InputClass "system-keyboard"
[    16.626] (II) Using input driver 'evdev' for 'Power Button'
[    16.626] (**) Power Button: always reports core events
[    16.626] (**) evdev: Power Button: Device: "/dev/input/event0"
[    16.626] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.626] (--) evdev: Power Button: Found keys
[    16.626] (II) evdev: Power Button: Configuring as keyboard
[    16.626] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    16.626] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    16.626] (**) Option "xkb_rules" "evdev"
[    16.626] (**) Option "xkb_model" "pc104"
[    16.626] (**) Option "xkb_layout" "us,ru"
[    16.626] (**) Option "xkb_variant" ","
[    16.626] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    16.626] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[    16.626] (II) No input driver specified, ignoring this device.
[    16.626] (II) This device may have been added with another device file.
[    16.627] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[    16.627] (II) No input driver specified, ignoring this device.
[    16.627] (II) This device may have been added with another device file.
[    16.627] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[    16.627] (II) No input driver specified, ignoring this device.
[    16.627] (II) This device may have been added with another device file.
[    16.627] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[    16.627] (II) No input driver specified, ignoring this device.
[    16.627] (II) This device may have been added with another device file.
[    16.628] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event4)
[    16.628] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[    16.628] (**) UVC Camera (046d:0825): Applying InputClass "system-keyboard"
[    16.628] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[    16.628] (**) UVC Camera (046d:0825): always reports core events
[    16.628] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event4"
[    16.628] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[    16.628] (--) evdev: UVC Camera (046d:0825): Found keys
[    16.628] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[    16.628] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4/event4"
[    16.628] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 8)
[    16.628] (**) Option "xkb_rules" "evdev"
[    16.628] (**) Option "xkb_model" "pc104"
[    16.628] (**) Option "xkb_layout" "us,ru"
[    16.628] (**) Option "xkb_variant" ","
[    16.628] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    16.628] (II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event3)
[    16.628] (**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
[    16.628] (II) Using input driver 'evdev' for 'Razer  Razer Abyssus'
[    16.628] (**) Razer  Razer Abyssus: always reports core events
[    16.628] (**) evdev: Razer  Razer Abyssus: Device: "/dev/input/event3"
[    16.628] (--) evdev: Razer  Razer Abyssus: Vendor 0x1532 Product 0x1c
[    16.629] (--) evdev: Razer  Razer Abyssus: Found 11 mouse buttons
[    16.629] (--) evdev: Razer  Razer Abyssus: Found scroll wheel(s)
[    16.629] (--) evdev: Razer  Razer Abyssus: Found relative axes
[    16.629] (--) evdev: Razer  Razer Abyssus: Found x and y relative axes
[    16.629] (II) evdev: Razer  Razer Abyssus: Configuring as mouse
[    16.629] (II) evdev: Razer  Razer Abyssus: Adding scrollwheel support
[    16.629] (**) evdev: Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
[    16.629] (**) evdev: Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.629] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:1532:001C.0001/input/input3/event3"
[    16.629] (II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE, id 9)
[    16.629] (II) evdev: Razer  Razer Abyssus: initialized for relative axes.
[    16.629] (**) Razer  Razer Abyssus: (accel) keeping acceleration scheme 1
[    16.629] (**) Razer  Razer Abyssus: (accel) acceleration profile 0
[    16.629] (**) Razer  Razer Abyssus: (accel) acceleration factor: 2.000
[    16.629] (**) Razer  Razer Abyssus: (accel) acceleration threshold: 4
[    16.629] (II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse0)
[    16.629] (II) No input driver specified, ignoring this device.
[    16.629] (II) This device may have been added with another device file.
[    16.629] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event10)
[    16.630] (II) No input driver specified, ignoring this device.
[    16.630] (II) This device may have been added with another device file.
[    16.630] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[    16.630] (II) No input driver specified, ignoring this device.
[    16.630] (II) This device may have been added with another device file.
[    16.630] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event5)
[    16.630] (II) No input driver specified, ignoring this device.
[    16.630] (II) This device may have been added with another device file.
[    16.630] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[    16.630] (II) No input driver specified, ignoring this device.
[    16.630] (II) This device may have been added with another device file.
[    16.631] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[    16.631] (II) No input driver specified, ignoring this device.
[    16.631] (II) This device may have been added with another device file.
[    16.631] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event8)
[    16.631] (II) No input driver specified, ignoring this device.
[    16.631] (II) This device may have been added with another device file.
[    16.631] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event9)
[    16.631] (II) No input driver specified, ignoring this device.
[    16.631] (II) This device may have been added with another device file.
[    16.631] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    16.631] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.631] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    16.631] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    16.631] (**) AT Translated Set 2 keyboard: always reports core events
[    16.631] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    16.631] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    16.631] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    16.631] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    16.631] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    16.631] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    16.631] (**) Option "xkb_rules" "evdev"
[    16.632] (**) Option "xkb_model" "pc104"
[    16.632] (**) Option "xkb_layout" "us,ru"
[    16.632] (**) Option "xkb_variant" ","
[    16.632] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    16.761] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-3)) does not support
[    16.761] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    16.770] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-3)) does not support
[    16.770] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    28.599] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-3)) does not support
[    28.599] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    28.686] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-3)) does not support
[    28.686] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    30.033] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-3)) does not support
[    30.033] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.

Вот Xorg.0.log с xorg.conf:

+ открыть спойлер
[    15.190] 
X.Org X Server 1.16.2
Release Date: 2014-11-10
[    15.190] X Protocol Version 11, Revision 0
[    15.190] Build Operating System:  3.17.2-200.fc20.x86_64 
[    15.190] Current Operating System: Linux localhost.localdomain 3.17.4-301.fc21.x86_64 #1 SMP Thu Nov 27 19:09:10 UTC 2014 x86_64
[    15.190] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17.4-301.fc21.x86_64 root=/dev/sda2 ro rhgb quiet LANG=ru_RU.UTF-8 nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off
[    15.190] Build Date: 21 November 2014  01:15:20AM
[    15.190] Build ID: xorg-x11-server 1.16.2-1.fc21 
[    15.190] Current version of pixman: 0.32.6
[    15.190]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    15.190] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.190] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 14 10:13:49 2014
[    15.191] (==) Using config file: "/etc/X11/xorg.conf"
[    15.191] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.191] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.307] (==) ServerLayout "Layout0"
[    15.770] (**) |-->Screen "Screen0" (0)
[    15.770] (**) |   |-->Monitor "Monitor0"
[    15.770] (**) |   |-->Device "Device0"
[    15.770] (**) |-->Input Device "Keyboard0"
[    15.770] (**) |-->Input Device "Mouse0"
[    15.770] (==) Automatically adding devices
[    15.770] (==) Automatically enabling devices
[    15.770] (==) Automatically adding GPU devices
[    15.771] (**) FontPath set to:
    /usr/share/fonts/default/Type1,
    catalogue:/etc/X11/fontpath.d,
    built-ins
[    15.771] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    15.771] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    15.771] (WW) Disabling Keyboard0
[    15.771] (WW) Disabling Mouse0
[    15.771] (II) Loader magic: 0x81de40
[    15.771] (II) Module ABI versions:
[    15.771]     X.Org ANSI C Emulation: 0.4
[    15.771]     X.Org Video Driver: 18.0
[    15.771]     X.Org XInput driver : 21.0
[    15.771]     X.Org Server Extension : 8.0
[    15.778] (EE) systemd-logind: failed to get session: PID 979 does not belong to any known session
[    15.779] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.781] (--) PCI:*(0:1:0:0) 10de:11c0:1458:354e rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    15.781] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    15.781] (II) "glx" will be loaded by default.
[    15.781] (II) LoadModule: "glx"
[    15.876] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    17.063] (II) Module glx: vendor="X.Org Foundation"
[    17.847]     compiled for 1.16.2, module version = 1.0.0
[    17.847]     ABI class: X.Org Server Extension, version 8.0
[    17.847] (==) AIGLX enabled
[    17.847] (II) LoadModule: "nvidia"
[    17.847] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    17.852] (II) Module nvidia: vendor="NVIDIA Corporation"
[    17.852]     compiled for 4.0.2, module version = 1.0.0
[    17.852]     Module class: X.Org Video Driver
[    17.852] (II) NVIDIA dlloader X Driver  343.22  Thu Sep 11 15:34:47 PDT 2014
[    17.852] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    17.852] (++) using VT number 1

[    17.853] (II) Loading sub module "fb"
[    17.853] (II) LoadModule: "fb"
[    17.853] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    17.855] (II) Module fb: vendor="X.Org Foundation"
[    17.855]     compiled for 1.16.2, module version = 1.0.0
[    17.855]     ABI class: X.Org ANSI C Emulation, version 0.4
[    17.855] (II) Loading sub module "wfb"
[    17.855] (II) LoadModule: "wfb"
[    17.855] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    17.856] (II) Module wfb: vendor="X.Org Foundation"
[    17.856]     compiled for 1.16.2, module version = 1.0.0
[    17.856]     ABI class: X.Org ANSI C Emulation, version 0.4
[    17.856] (II) Loading sub module "ramdac"
[    17.856] (II) LoadModule: "ramdac"
[    17.856] (II) Module "ramdac" already built-in
[    17.857] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    17.857] (==) NVIDIA(0): RGB weight 888
[    17.857] (==) NVIDIA(0): Default visual is TrueColor
[    17.857] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.857] (**) NVIDIA(0): Enabling 2D acceleration
[    17.857] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[    17.857] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[    17.857] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[    17.857] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[    17.857] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[    18.448] (II) NVIDIA(0): Display (LG Electronics IPS236 (DFP-3)) does not support
[    18.448] (II) NVIDIA(0):     NVIDIA 3D Vision stereo.
[    18.448] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    18.449] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[    18.449] (--) NVIDIA(0): Memory: 2097152 kBytes
[    18.449] (--) NVIDIA(0): VideoBIOS: 80.06.10.00.3d
[    18.449] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    18.456] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[    18.456] (--) NVIDIA(0):     CRT-0
[    18.456] (--) NVIDIA(0):     DFP-0
[    18.456] (--) NVIDIA(0):     DFP-1
[    18.456] (--) NVIDIA(0):     DFP-2
[    18.456] (--) NVIDIA(0):     LG Electronics IPS236 (DFP-3) (boot, connected)
[    18.456] (--) NVIDIA(0):     DFP-4
[    18.456] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    18.456] (--) NVIDIA(0): DFP-0: Internal TMDS
[    18.456] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    18.457] (--) NVIDIA(0): DFP-1: Internal TMDS
[    18.457] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    18.457] (--) NVIDIA(0): DFP-2: Internal TMDS
[    18.457] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[    18.457] (--) NVIDIA(0): LG Electronics IPS236 (DFP-3): Internal TMDS
[    18.457] (--) NVIDIA(GPU-0): LG Electronics IPS236 (DFP-3): 330.0 MHz maximum pixel clock
[    18.457] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[    18.457] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    18.457] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    18.457] (**) NVIDIA(0):     device LG Electronics IPS236 (DFP-3) (Using EDID
[    18.457] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    18.458] (==) NVIDIA(0): 
[    18.458] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    18.458] (==) NVIDIA(0):     will be used as the requested mode.
[    18.458] (==) NVIDIA(0): 
[    18.458] (II) NVIDIA(0): Validated MetaModes:
[    18.458] (II) NVIDIA(0):     "DFP-3:nvidia-auto-select"
[    18.458] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    18.492] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[    18.492] (--) NVIDIA(0):     option
[    18.492] (--) Depth 24 pixmap format is 32 bpp
[    18.492] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    18.492] (II) NVIDIA:     access.
[    18.496] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    18.496] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    18.496] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    18.496] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    18.496] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    18.496] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    18.496] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    18.496] (II) NVIDIA(0):     Config Options in the README.
[    18.502] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select"
[    18.560] (==) NVIDIA(0): Disabling shared memory pixmaps
[    18.560] (==) NVIDIA(0): Backing store enabled
[    18.560] (==) NVIDIA(0): Silken mouse enabled
[    18.560] (**) NVIDIA(0): DPMS enabled
[    18.561] (II) Loading sub module "dri2"
[    18.561] (II) LoadModule: "dri2"
[    18.561] (II) Module "dri2" already built-in
[    18.561] (II) NVIDIA(0): [DRI2] Setup complete
[    18.561] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    18.561] (--) RandR disabled
[    18.566] (II) SELinux: Disabled by boolean
[    18.567] (II) AIGLX: Screen 0 is not DRI2 capable
[    18.567] (EE) AIGLX: reverting to software rendering
[    19.270] (EE) AIGLX error: dlopen of /usr/lib64/dri/swrast_dri.so failed (/usr/lib64/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch)
[    19.270] (EE) GLX: could not load software renderer
[    19.270] (II) GLX: no usable GL providers found for screen 0
[    19.354] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    19.354] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.354] (**) Power Button: Applying InputClass "system-keyboard"
[    19.354] (II) LoadModule: "evdev"
[    19.355] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    19.357] (II) Module evdev: vendor="X.Org Foundation"
[    19.357]     compiled for 1.16.0, module version = 2.9.0
[    19.357]     Module class: X.Org XInput Driver
[    19.357]     ABI class: X.Org XInput driver, version 21.0
[    19.357] (II) Using input driver 'evdev' for 'Power Button'
[    19.357] (**) Power Button: always reports core events
[    19.357] (**) evdev: Power Button: Device: "/dev/input/event1"
[    19.357] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.357] (--) evdev: Power Button: Found keys
[    19.357] (II) evdev: Power Button: Configuring as keyboard
[    19.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    19.357] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    19.357] (**) Option "xkb_rules" "evdev"
[    19.357] (**) Option "xkb_model" "pc104"
[    19.357] (**) Option "xkb_layout" "us,ru"
[    19.357] (**) Option "xkb_variant" ","
[    19.357] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    19.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    19.381] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.381] (**) Power Button: Applying InputClass "system-keyboard"
[    19.381] (II) Using input driver 'evdev' for 'Power Button'
[    19.381] (**) Power Button: always reports core events
[    19.381] (**) evdev: Power Button: Device: "/dev/input/event0"
[    19.381] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.381] (--) evdev: Power Button: Found keys
[    19.381] (II) evdev: Power Button: Configuring as keyboard
[    19.381] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    19.381] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    19.381] (**) Option "xkb_rules" "evdev"
[    19.381] (**) Option "xkb_model" "pc104"
[    19.381] (**) Option "xkb_layout" "us,ru"
[    19.381] (**) Option "xkb_variant" ","
[    19.381] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    19.381] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[    19.381] (II) No input driver specified, ignoring this device.
[    19.381] (II) This device may have been added with another device file.
[    19.382] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[    19.382] (II) No input driver specified, ignoring this device.
[    19.382] (II) This device may have been added with another device file.
[    19.382] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[    19.382] (II) No input driver specified, ignoring this device.
[    19.382] (II) This device may have been added with another device file.
[    19.382] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[    19.382] (II) No input driver specified, ignoring this device.
[    19.382] (II) This device may have been added with another device file.
[    19.382] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event15)
[    19.382] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[    19.382] (**) UVC Camera (046d:0825): Applying InputClass "system-keyboard"
[    19.382] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[    19.382] (**) UVC Camera (046d:0825): always reports core events
[    19.382] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event15"
[    19.383] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[    19.383] (--) evdev: UVC Camera (046d:0825): Found keys
[    19.383] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[    19.383] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input15/event15"
[    19.383] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 8)
[    19.383] (**) Option "xkb_rules" "evdev"
[    19.383] (**) Option "xkb_model" "pc104"
[    19.383] (**) Option "xkb_layout" "us,ru"
[    19.383] (**) Option "xkb_variant" ","
[    19.383] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    19.383] (II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event3)
[    19.383] (**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
[    19.383] (II) Using input driver 'evdev' for 'Razer  Razer Abyssus'
[    19.383] (**) Razer  Razer Abyssus: always reports core events
[    19.383] (**) evdev: Razer  Razer Abyssus: Device: "/dev/input/event3"
[    19.383] (--) evdev: Razer  Razer Abyssus: Vendor 0x1532 Product 0x1c
[    19.383] (--) evdev: Razer  Razer Abyssus: Found 11 mouse buttons
[    19.383] (--) evdev: Razer  Razer Abyssus: Found scroll wheel(s)
[    19.383] (--) evdev: Razer  Razer Abyssus: Found relative axes
[    19.383] (--) evdev: Razer  Razer Abyssus: Found x and y relative axes
[    19.383] (II) evdev: Razer  Razer Abyssus: Configuring as mouse
[    19.383] (II) evdev: Razer  Razer Abyssus: Adding scrollwheel support
[    19.383] (**) evdev: Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
[    19.383] (**) evdev: Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.383] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:1532:001C.0001/input/input3/event3"
[    19.383] (II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE, id 9)
[    19.383] (II) evdev: Razer  Razer Abyssus: initialized for relative axes.
[    19.384] (**) Razer  Razer Abyssus: (accel) keeping acceleration scheme 1
[    19.384] (**) Razer  Razer Abyssus: (accel) acceleration profile 0
[    19.384] (**) Razer  Razer Abyssus: (accel) acceleration factor: 2.000
[    19.384] (**) Razer  Razer Abyssus: (accel) acceleration threshold: 4
[    19.384] (II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse0)
[    19.384] (II) No input driver specified, ignoring this device.
[    19.384] (II) This device may have been added with another device file.
[    19.384] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[    19.384] (II) No input driver specified, ignoring this device.
[    19.384] (II) This device may have been added with another device file.
[    19.384] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[    19.385] (II) No input driver specified, ignoring this device.
[    19.385] (II) This device may have been added with another device file.
[    19.385] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[    19.385] (II) No input driver specified, ignoring this device.
[    19.385] (II) This device may have been added with another device file.
[    19.385] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[    19.385] (II) No input driver specified, ignoring this device.
[    19.385] (II) This device may have been added with another device file.
[    19.385] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7)
[    19.385] (II) No input driver specified, ignoring this device.
[    19.385] (II) This device may have been added with another device file.
[    19.386] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[    19.386] (II) No input driver specified, ignoring this device.
[    19.386] (II) This device may have been added with another device file.
[    19.386] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[    19.386] (II) No input driver specified, ignoring this device.
[    19.386] (II) This device may have been added with another device file.
[    19.386] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    19.386] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    19.386] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    19.386] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    19.386] (**) AT Translated Set 2 keyboard: always reports core events
[    19.386] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    19.386] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    19.386] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    19.386] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    19.386] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    19.386] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    19.386] (**) Option "xkb_rules" "evdev"
[    19.386] (**) Option "xkb_model" "pc104"
[    19.386] (**) Option "xkb_layout" "us,ru"
[    19.386] (**) Option "xkb_variant" ","
[    19.386] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    19.564] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-3)) does not support
[    19.564] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    19.573] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-3)) does not support
[    19.573] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.

А вот xorg.conf^

+ открыть спойлер
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 343.22  (buildmeister@swio-display-x86-rhel47-05)  Thu Sep 11 16:49:51 PDT 2014


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    FontPath        "/usr/share/fonts/default/Type1"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

2 Ответ от sun

  • sun
  • sun
  • Пользователь
  • Неактивен
  • Зарегистрирован: 18.10.2010
  • Сообщений: 1,187
  • Репутация : [ 58 | 1 ]

Для того чтобы ставить драйвер nvidia сейчас достаточно одной команды yum install kmod-nvidia, исполнять nvidia-xconfig больше нет необходимости, у меня в системе вообще нет файла xorg.conf, есть только автоматически сгенерированный nvidia-xorg.conf c одной секцией и всё работает отлично. Возможно эти конфиги конфликтуют друг с другом??

Во втором логе у тебя ошибка, которой нет в первом

[    17.857] (EE) NVIDIA(0):     Failed to initialize the GLX module; please check in your X
[    17.857] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[    17.857] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[    17.857] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[    17.857] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.

Ничто из того, что поддаётся объяснению, не существует.

3 Ответ от kirillov3798 (14.12.2014 09:22:19 отредактировано kirillov3798)

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

sun, а параметр  "Option "TripleBuffer" "1"" прописывать тоже в nvidia-xorg.conf?

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

4 Ответ от sun

  • sun
  • sun
  • Пользователь
  • Неактивен
  • Зарегистрирован: 18.10.2010
  • Сообщений: 1,187
  • Репутация : [ 58 | 1 ]
kirillov3798 пишет:

sun, а параметр  "Option "TripleBuffer" "1"" прописывать тоже в nvidia-xorg.conf?

Я только что прописал ради эксперимента, всё работает. А что даёт этот параметр? Увеличение производительности в играх?

вот мой nvidia-xorg.conf

# RPM Fusion - nvidia-xorg.conf
#
Section "Device"
    Identifier  "Videocard0"
    Driver      "nvidia"
    Option      "Triplebuffer" "True"
EndSection

Ничто из того, что поддаётся объяснению, не существует.

5 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]
sun пишет:

Увеличение производительности в играх?

Нет. Устраняет тиринг.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

6 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

Еще как назло нет модуля для последнего ядра...  ac

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

7 Ответ от verg

  • verg
  • verg
  • Пользователь
  • Неактивен
  • Зарегистрирован: 06.09.2010
  • Сообщений: 10,132
  • Репутация : [ 432 | 1 ]
kirillov3798 пишет:

Еще как назло нет модуля для последнего ядра...  ac

Драйвер nvidia343.22 в федоре21 уже пропатчен для 3.18.

kirillov3798 пишет:
sun пишет:

Увеличение производительности в играх?

Нет. Устраняет тиринг.

При включённой вертикальной синхронизации.
Без неё включать бестолку.

8 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]
verg пишет:

Драйвер nvidia343.22 в федоре21 уже пропатчен для 3.18.

Я имею в виду, что для последнего ядра в Fedora 21 (3.17.6-300) нет модуля nvidia (последний для 3.17.4-301). Вот и мучаюсь.

verg пишет:

При включённой вертикальной синхронизации.

Само собой.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

9 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

Ладно, перекантуюсь на Ubuntu 14.04. Подожду несколько недельку и попробую еще раз поставить Fedora 21.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

10 Ответ от verg

  • verg
  • verg
  • Пользователь
  • Неактивен
  • Зарегистрирован: 06.09.2010
  • Сообщений: 10,132
  • Репутация : [ 432 | 1 ]

kirillov3798,
С сайта драйвер поставить? =)
Потом удалить.

Да и не стоит того минорный релиз ядра, чтобы из-за него переходить куда-то. На 3.17.4 тоже можно жить.

11 Ответ от kirillov3798 (14.12.2014 11:41:08 отредактировано kirillov3798)

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

verg, да тут вообще странно получается. Ставлю я значит драйвер для 3.17.4-301, перезагружаюсь (естественно выбираю ядро 3.17.4-301), но такое ощущение, как будто все еще nouveau используется: показывается plymouth разрешением 1920x1080 и консоль такого же разрешения. Почему странно? Потому что драйвер nvidia не поддерживает kms и экран загрузки с блобом разрешением 800x600. Или блоб nvidia научили kms?

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

12 Ответ от sun

  • sun
  • sun
  • Пользователь
  • Неактивен
  • Зарегистрирован: 18.10.2010
  • Сообщений: 1,187
  • Репутация : [ 58 | 1 ]
kirillov3798 пишет:

как будто все еще nouveau используется:

А эта команда что кажет?

glxinfo | grep OpenGL
Ничто из того, что поддаётся объяснению, не существует.

13 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

sun, ради чистоты эксперемента переустановил Fedora. Все работает. Посмотрим что будет дальше.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

14 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

sun, даже после прописывания параметра Triplebuffer в nvidia-xorg.conf тиринг появляется. Что делать?
И по поводу xorg.conf. Вот у человека такая же проблема как и у меня: http://forum.russianfedora.pro/viewtopi … amp;t=6725

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

15 Ответ от sun

  • sun
  • sun
  • Пользователь
  • Неактивен
  • Зарегистрирован: 18.10.2010
  • Сообщений: 1,187
  • Репутация : [ 58 | 1 ]
kirillov3798 пишет:

sun, даже после прописывания параметра Triplebuffer в nvidia-xorg.conf тиринг появляется. Что делать?

verg же написал сверху, что это работает только

verg пишет:

При включённой вертикальной синхронизации.
Без неё включать бестолку.

Vsync включена?
Вот видос как побороть тиринг, смотри внимательно с 3:30 и поставь в nvidia-settings все настройки как советует этот чувак
https://www.youtube.com/watch?v=Sw7s5M3fgcE

Ничто из того, что поддаётся объяснению, не существует.

16 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

sun, все включено. В чем проблема понятия не имею.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

17 Ответ от Wolfenberg

  • Wolfenberg
  • Wolfenberg
  • Медвежатко
  • Неактивен
  • Откуда: Тольятти
  • Зарегистрирован: 17.07.2010
  • Сообщений: 8,882
  • Репутация : [ 125 | 8 ]

kirillov3798,  bw а я вообще пользуюсь nouveau - нигде ничего не вылазиет.

Linux Mint 19.3 Mate Edition
Windows 7

18 Ответ от kirillov3798 (14.12.2014 15:32:52 отредактировано kirillov3798)

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

Wolfenberg, я бы тоже им пользовался, если бы не жуткие глюки на моей видеокарте.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

19 Ответ от Wolfenberg

  • Wolfenberg
  • Wolfenberg
  • Медвежатко
  • Неактивен
  • Откуда: Тольятти
  • Зарегистрирован: 17.07.2010
  • Сообщений: 8,882
  • Репутация : [ 125 | 8 ]

kirillov3798,  ag Хорошо, что в своё время послал лесом сменщика, когда он рубашку
на себе рвал, что это лучшая видеокарта в мире

Linux Mint 19.3 Mate Edition
Windows 7

20 Ответ от sun

  • sun
  • sun
  • Пользователь
  • Неактивен
  • Зарегистрирован: 18.10.2010
  • Сообщений: 1,187
  • Репутация : [ 58 | 1 ]
kirillov3798 пишет:

sun, все включено. В чем проблема понятия не имею.

А где и при каких манипуляциях тиринг возникает?

Ничто из того, что поддаётся объяснению, не существует.

21 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

sun, элементарно при перемещении окна, прокрутки странички в firefox'е.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

22 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]
Wolfenberg пишет:

Хорошо, что в своё время послал лесом сменщика, когда он рубашку
на себе рвал, что это лучшая видеокарта в мире

Карта-то отличная, драйвер поганенький.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

23 Ответ от sun (14.12.2014 16:02:56 отредактировано sun)

  • sun
  • sun
  • Пользователь
  • Неактивен
  • Зарегистрирован: 18.10.2010
  • Сообщений: 1,187
  • Репутация : [ 58 | 1 ]

Почитал ветку линуксоидов на devtalk.nvidia.com у многих проблемы с тирингом на картах с архитектурой Kepler и у нескольких именно на GTX 660, все ждут новых драйверов.  Есть ли эта проблема на других DE и в других дистрибутивах?
У меня GTX 650 Ti Boost, никакого тиринга не наблюдаю.

Ничто из того, что поддаётся объяснению, не существует.

24 Ответ от Wolfenberg

  • Wolfenberg
  • Wolfenberg
  • Медвежатко
  • Неактивен
  • Откуда: Тольятти
  • Зарегистрирован: 17.07.2010
  • Сообщений: 8,882
  • Репутация : [ 125 | 8 ]
kirillov3798 пишет:
Wolfenberg пишет:

Хорошо, что в своё время послал лесом сменщика, когда он рубашку
на себе рвал, что это лучшая видеокарта в мире

Карта-то отличная, драйвер поганенький.

Одно дополняет другое ab

Linux Mint 19.3 Mate Edition
Windows 7

25 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]
sun пишет:

Есть ли эта проблема на других DE и в других дистрибутивах?

Да.
Вот когда был xorg.conf проблем с тирингом не было. Но из-за него в F21 не стартуют иксы. Что за пироги-то такие?!

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

26 Ответ от sun

  • sun
  • sun
  • Пользователь
  • Неактивен
  • Зарегистрирован: 18.10.2010
  • Сообщений: 1,187
  • Репутация : [ 58 | 1 ]

Дык, какая проблема, открой nvidia-settings под рутом, выставь все параметры и сохрани конфигурацию как /etc/X11/xorg.conf
http://storage6.static.itmages.ru/i/14/1214/s_1418562954_6743243_3f6e64e696.png

А nvidia-xorg.conf переименуй как nvidia-xorg.conf.backup и всё, драйвер при загрузке подхватит конфиг из xorg.conf   У меня так работает.

Ничто из того, что поддаётся объяснению, не существует.

27 Ответ от kirillov3798 (14.12.2014 16:33:39 отредактировано kirillov3798)

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

sun, и в итоге получил черный экран. Ладно, попробую nvidia-xorg.conf в nvidia-xorg.conf.backup, а содержимое xorg.conf запихаю в nvidia-xorg.conf.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

28 Ответ от sun

  • sun
  • sun
  • Пользователь
  • Неактивен
  • Зарегистрирован: 18.10.2010
  • Сообщений: 1,187
  • Репутация : [ 58 | 1 ]
kirillov3798 пишет:

Ладно, попробую nvidia-xorg.conf в nvidia-xorg.conf.backup

Это нужно было делать до перезагрузки, иначе получается конфликт конфигов, файл *.conf в /etc/x11/ должен быть только один.

Ничто из того, что поддаётся объяснению, не существует.

29 Ответ от kirillov3798

  • Зарегистрирован: 25.07.2013
  • Сообщений: 2,044
  • Репутация : [ 50 | 2 ]

sun, само собой.
В общем, вот что получается: нужно использовать nvidia-xorg.conf, а не xorg.conf. Если nvidia-xorg.conf удалить, а xorg.conf создать, то Xorg не запуститься. Но проблема с тирингом есть, несмотря на включенную тройную буферизацию.

Fedora 21 Workstation KDE 4.14.4
Gigabyte GA-Z77-D3H, Intel Core i5-3470, nVidia GeForce GTX 660 2GB, 8GB RAM, 1TB HDD

30 Ответ от sun

  • sun
  • sun
  • Пользователь
  • Неактивен
  • Зарегистрирован: 18.10.2010
  • Сообщений: 1,187
  • Репутация : [ 58 | 1 ]
kirillov3798 пишет:

Если nvidia-xorg.conf удалить, а xorg.conf создать, то Xorg не запуститься.

Я сделал именно так для эксперимента, всё работает. Ну а с тирингом видать придётся другой драйвер ждать.

Ничто из того, что поддаётся объяснению, не существует.