Да все такой же выхлоп. Но nm-connection-editor видит же его

*** Добавлено: 30.10.2017 17:00:50 ***
Консоль:
[maxim@localhost ~]$ ifconfig
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.100.76.133 netmask 255.255.255.192 broadcast 10.100.76.191
inet6 fe80::4687:fcff:fe98:931d prefixlen 64 scopeid 0x20<link>
ether 44:87:fc:98:93:1d txqueuelen 1000 (Ethernet)
RX packets 20847 bytes 27489083 (26.2 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 19710 bytes 3849367 (3.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 8 bytes 480 (480.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 480 (480.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1492
inet 94.100.198.65 netmask 255.255.255.255 destination 94.100.192.2
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 20667 bytes 27019814 (25.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 19423 bytes 3401305 (3.2 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp0s26u1u1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 9e:95:3a:9c:a9:1a txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Fedora Workstation