1 Тема от Aleks

  • Aleks
  • Новичок
  • Неактивен
  • Зарегистрирован: 25.07.2010
  • Сообщений: 44
  • Репутация : [ 0 | 0 ]

Пытаюсь загрузиться с Live CD, появляется заставка рабочего стола с несколькими надписями, последняя -  Starting Window Meneger в левом нижнем углу, дальше экран гаснет, на нем появляется курсор... и все. До этого этапа еще можно переключиться в режим консоли, после компьютер "подвисает", и на команды реагирует с большой задержкой. Пробовал режимы xdriver=vesa, acpi=off, noapic nolapic, но ничего не помогает. Видеокарта - Intel(R) 82865G Graphics Controller, процессор Celeron 2,26 Ггц, но видеокарта по-моему распознается, кроме того, при выборе в параметрах загрузки текстового режима - то же самое. Диск фирменный, сам не записывал, может с оборудованием конфликты? Что тут можно еще предпринять?

P. S. Я в Linux "чайник", пробую установить впервые, если в чем наивен, заранее извините.

2 Ответ от SUSE_user

  • Откуда: Санкт-Петербург
  • Зарегистрирован: 21.02.2010
  • Сообщений: 1,700
  • Репутация : [ 24 | 2 ]

Оно еще реагирует на команды? Тогда логи X и dmesg было бы надо увидеть.

3 Ответ от vint

  • vint
  • 我学习汉语！
  • Неактивен
  • Откуда: Сыктывкар
  • Зарегистрирован: 21.02.2010
  • Сообщений: 550
  • Репутация : [ 3 | 0 ]

Скорее всего, косяк в видеокарте. Возможно что подгружается не правильный модуль. А вот почему система начинает глючить/тормазить даже в консольном режиме -- загадка.
Переходи в консоль и заходи под root.
Вставь Flash-drive в компьютер, с монтируй его.
Чтоб узнать как записалась флешка в системе:

 Консоль:

# fdisk -l
# mkdir /mnt/usb
# mount -t vfat -o rw,iocharset=utf8,codepage=866 /dev/sdg1 /mnt/usb

/dev/sdg1 -- Я взял как пример, у тебя может быть другое. также, можешь и смотнитовать свой HDD. Только используя уже ntfs-3g
Теперь соберём логи:
 Консоль:

# cd /var/log
# cat Xorg.conf > /mnt/usb/Xorg.conf.txt
# cat prcsys.log > /mnt/usb/prcsys.log.txt
# cat messages > /mnt/usb/messages.txt
# dmesg > /mnt/usb/dmesg.txt

Скопируй их потом в форум используя тэг [ code ] [ /code ] (Без пробелов).
Если я забыл добавить какой-то лог -- добавляйте/исправляйте.

Q9550, ASUS P5QL/EPU, NV GF 250 GTS 1024 Mb, 5 Gb RAM (800 Mgz), Beholder 609, KDE 4.6.5, kernel 3.0.3-desktop-nrj.69mib

4 Ответ от bolivar4

  • bolivar4
  • bolivar4
  • Пользователь
  • Неактивен
  • Зарегистрирован: 21.02.2010
  • Сообщений: 301
  • Репутация : [ 7 | 0 ]

Да вроде с вашим железом проблем не должно быть, вот на сайте есть описание.
http://wiki.mandriva.com/ru/2010.1_Errata

Вы не любите кошек?
Вы просто не умеете их готовить!

5 Ответ от Aleks (25.07.2010 17:49:38 отредактировано vint)

  • Aleks
  • Новичок
  • Неактивен
  • Зарегистрирован: 25.07.2010
  • Сообщений: 44
  • Репутация : [ 0 | 0 ]

Большое спасибо за инструкцию по копированию файлов на флешку! Не получилось скопировать только Xorg.conf - не найден в системе, как только разберусь, сразу добавлю. Кстати, забыл уточнить, когда перехожу в консоль сразу после выбора языка, времени и раскладки клавиатуры, работаю в ней без проблем, если после начальной загрузки графики - начинаются тормоза (для справки). Вот файлы:

dmesg

Linux version 2.6.31.5-desktop586-1mnb (herton@n2.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Fri Oct 23 00:21:26 EDT 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
 BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
 BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0xf7f0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-F7FFF uncachable
  F8000-FBFFF write-through
  FC000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000 mask FF0000000 write-back
  1 base 00F800000 mask FFF800000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-000000000f7f0000
 0000000000 - 0000400000 page 4k
 0000400000 - 000f400000 page 2M
 000f400000 - 000f7f0000 page 4k
kernel direct mapping tables up to f7f0000 @ 10000-16000
RAMDISK: 0f11d000 - 0f7ce22e
ACPI: RSDP 000f6bb0 00014 (v00 IntelR)
ACPI: RSDT 0f7f3000 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0f7f3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0f7f30c0 03F5B (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 0f7f0000 00040
ACPI: APIC 0f7f7040 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
247MB LOWMEM available.
  mapped low ram: 0 - 0f7f0000
  low ram: 0 - 0f7f0000
  node 0 low ram: 00000000 - 0f7f0000
  node 0 bootmap 00012000 - 00013f00
(9 early reservations) ==> bootmem [0000000000 - 000f7f0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 0000700ec4]    TEXT DATA BSS ==> [0000100000 - 0000700ec4]
  #4 [000f11d000 - 000f7ce22e]          RAMDISK ==> [000f11d000 - 000f7ce22e]
  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #6 [0000701000 - 000070406e]              BRK ==> [0000701000 - 000070406e]
  #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #8 [0000012000 - 0000014000]          BOOTMAP ==> [0000012000 - 0000014000]
found SMP MP-table at [c00f5170] f5170
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0000f7f0
  HighMem  0x0000f7f0 -> 0x0000f7f0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0000f7f0
On node 0 totalpages: 63359
free_area_init_node: node 0, pgdat c05cff00, node_mem_map c1000200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 464 pages used for memmap
  Normal zone: 58912 pages, LIFO batch:15
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at f800000 (gap: f800000:ef400000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages at c11f2000, static data 35132 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 62863
Kernel command line: initrd=/boot/cdrom/initrd.gz splash=silent vga=788 BOOT_IMAGE=/boot/vmlinuz 
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 237836k/253888k available (3093k kernel code, 15352k reserved, 1885k data, 436k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffd54000 - 0xfffff000   (2732 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xcfff0000 - 0xff3fe000   ( 756 MB)
    lowmem  : 0xc0000000 - 0xcf7f0000   ( 247 MB)
      .init : 0xc05dd000 - 0xc064a000   ( 436 kB)
      .data : 0xc0405492 - 0xc05dc8c8   (1885 kB)
      .text : 0xc0100000 - 0xc0405492   (3093 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 2260.723 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.44 BogoMIPS (lpj=2260723)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Counters: no PMU driver, software counters only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Checking initramfs for custom DSDT
ACPI: Aborted because no cpio magic.
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 14182 entries in 28 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU 2.26GHz stepping 04
Brought up 1 CPUs
Total of 1 processors activated (4521.44 BogoMIPS).
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
Booting paravirtualized kernel on bare hardware
Time:  1:40:38  Date: 06/10/04
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xf8100000-0xf817ffff]
pci 0000:00:02.0: reg 18 io port: [0xb000-0xb007]
pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: reg 20 io port: [0xa000-0xa01f]
pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
pci 0000:00:1d.2: reg 20 io port: [0xa800-0xa81f]
pci 0000:00:1d.3: reg 20 io port: [0xac00-0xac1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8180000-0xf81803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
pci 0000:00:1f.5: reg 10 io port: [0xb800-0xb8ff]
pci 0000:00:1f.5: reg 14 io port: [0xbc00-0xbc3f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xf8181000-0xf81811ff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf8182000-0xf81820ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:01:01.0: reg 10 32bit mmio: [0xf8000000-0xf80001ff]
pci 0000:01:09.0: reg 10 io port: [0x9000-0x90ff]
pci 0000:01:09.0: reg 14 32bit mmio: [0xf8001000-0xf80010ff]
pci 0000:01:09.0: supports D1 D2
pci 0000:01:09.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:09.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf8000000-0xf80fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
system 00:01: ioport range 0xb78-0xb7b has been reserved
system 00:01: ioport range 0xf78-0xf7b has been reserved
system 00:01: ioport range 0xa78-0xa7b has been reserved
system 00:01: ioport range 0xe78-0xe7b has been reserved
system 00:01: ioport range 0xbbc-0xbbf has been reserved
system 00:01: ioport range 0xfbc-0xfbf has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x294-0x297 has been reserved
system 00:0c: ioport range 0x400-0x4bf could not be reserved
system 00:0e: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0e: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
system 00:0e: iomem range 0xf7f0000-0xf7fffff could not be reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0x100000-0xf7effff could not be reserved
system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0e: iomem range 0xfec01000-0xfed8ffff could not be reserved
system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0e: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0e: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   IO window: 0x9000-0x9fff
pci 0000:00:1e.0:   MEM window: 0xf8000000-0xf80fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xf80fffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6852k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1086831638.173:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 478
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
vesafb: framebuffer at 0xf0000000, mapped to 0xd0080000, using 1875k, total 8000k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 865 Chipset
agpgart-intel 0000:00:00.0: detected 8060K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  Magic number: 8:983:659
block ram12: hash matches
rtc_cmos 00:03: setting system clock to 2004-06-10 01:40:39 UTC (1086831639)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Switched to high resolution mode on CPU 0
psmouse serio1: ID: 10 00 64
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
RAMDISK: gzip image found at block 0
VFS: Mounted root (ext2 filesystem) on device 1:0.
Uniform Multi-Platform E-IDE driver
ide-cd driver 5.00
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ac00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8180000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.5-desktop586-1mnb ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
loop: module loaded
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Registering unionfs 1.4
unionfs: debugging is not enabled
usb 5-7: new high speed USB device using ehci_hcd and address 2
usb 5-7: New USB device found, idVendor=13fe, idProduct=1a00
usb 5-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-7: Product: DataTraveler 2.0
usb 5-7: Manufacturer: Kingston
usb 5-7: SerialNumber: 5B77058D280A
usb 5-7: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata2.00: ATAPI: SONY    CD-ROM CDU5212, 5YS1, max UDMA/33
ata1.00: ATA-7: SAMSUNG SP0401N, TJ100-30, max UDMA/100
ata1.00: 78242976 sectors, multi 16: LBA48 
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP0401N  TJ10 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
scsi 2:0:0:0: CD-ROM            SONY     CD-ROM CDU5212   5YS1 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
 sda1
sd 1:0:0:0: [sda] Attached SCSI disk
scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
usb-storage: device scan complete
sd 0:0:0:0: [sdb] 1007616 512-byte logical blocks: (515 MB/492 MiB)
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sdb] Attached SCSI removable disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
------------[ cut here ]------------
WARNING: at fs/namei.c:1270 lookup_one_len+0xcf/0xf0()
Hardware name:  
Modules linked in: ahci ata_piix libata unionfs squashfs sqlzma unlzma loop ehci_hcd ohci_hcd uhci_hcd usb_storage usbcore sd_mod crc_t10dif vfat fat isofs nls_utf8 nls_iso8859_15 nls_iso8859_14 nls_iso8859_13 nls_iso8859_9 nls_iso8859_7 nls_iso8859_6 nls_iso8859_5 nls_iso8859_4 nls_iso8859_3 nls_iso8859_2 nls_iso8859_1 sr_mod scsi_mod ide_cd_mod ide_core
Pid: 25, comm: plymouthd Not tainted 2.6.31.5-desktop586-1mnb #1
Call Trace:
 [<c0140f62>] warn_slowpath_common+0x72/0xa0
 [<c01e79df>] ? lookup_one_len+0xcf/0xf0
 [<c01e79df>] ? lookup_one_len+0xcf/0xf0
 [<c0140faa>] warn_slowpath_null+0x1a/0x20
 [<c01e79df>] lookup_one_len+0xcf/0xf0
 [<c0287a55>] ? strlcat+0x25/0x70
 [<d0599517>] unionfs_lookup_backend+0x3b7/0x8d0 [unionfs]
 [<c020dde1>] ? ep_poll_callback+0x91/0xc0
 [<c0130f6c>] ? __wake_up_sync_key+0x4c/0x60
 [<c03e1c4e>] ? unix_stream_recvmsg+0x1ae/0x4e0
 [<d0591144>] unionfs_lookup+0x34/0x60 [unionfs]
 [<c01e6ab5>] ? path_put+0x25/0x30
 [<c01e5e61>] ? inode_permission+0x91/0xb0
 [<c01e66ea>] ? getname+0x2a/0xe0
 [<c01e7639>] do_lookup+0x139/0x1a0
 [<c01e7c73>] __link_path_walk+0x133/0xc60
 [<c01f3f7f>] ? mntput_no_expire+0x1f/0xd0
 [<c01df1bf>] ? get_empty_filp+0xcf/0x1c0
 [<c01e8946>] path_walk+0x46/0xa0
 [<c01e89f9>] do_path_lookup+0x59/0x90
 [<c01e983d>] do_filp_open+0xad/0x920
 [<c01f3f7f>] ? mntput_no_expire+0x1f/0xd0
 [<c01e6ab5>] ? path_put+0x25/0x30
 [<c01e5e61>] ? inode_permission+0x91/0xb0
 [<c01e66ea>] ? getname+0x2a/0xe0
 [<c01dbd55>] do_sys_open+0x55/0x160
 [<c01dbece>] sys_open+0x2e/0x40
 [<c0103e4c>] syscall_call+0x7/0xb
---[ end trace 65faae1c691f8d5a ]---
Freeing unused kernel memory: 436k freed
Tomoyo security MAC extension available but disabled by default. If you want to
enable and use it, ccs-tools package must be installed.
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: Attached scsi generic sg2 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input2
processor LNXCPU:00: registered as cooling_device0
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (52 C)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
fan PNP0C0B:00: registered as cooling_device1
ACPI: Fan [FAN] (on)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ppdev: user-space parallel port driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
intel_rng: FWH not detected
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 51063 usecs (2461 samples)
intel8x0: clocking to 48000
8139too Fast Ethernet driver 0.9.28
8139too 0000:01:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xd0bae000, 00:11:5b:76:bd:f8, IRQ 21
<6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
saa7146: register extension 'budget dvb'.
budget dvb 0000:01:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
IRQ 19/: IRQF_DISABLED is not guaranteed on shared IRQs
saa7146: found saa7146 @ mem d0bf4000 (revision 1, irq 19) (0x13c2,0x1018).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget-S-1401 PCI)
adapter has MAC addr = 00:d0:5c:b8:04:21
LNBx2x attached on addr=8
DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)...
vboxadd: VirtualBox Guest PCI device not found.
vboxadd: VirtualBox Guest PCI device not found.
vboxvfs: Unknown symbol vboxadd_cmc_open
vboxvfs: Unknown symbol RTLogBackdoorPrintf
vboxvfs: Unknown symbol vboxadd_cmc_ctl_guest_filter_mask
vboxvfs: Unknown symbol RTErrConvertToErrno
vboxvfs: Unknown symbol vboxadd_cmc_call
vboxvfs: Unknown symbol vboxadd_cmc_close
vboxvfs: Unknown symbol AssertMsg2
vboxvfs: Unknown symbol RTAssertShouldPanic
vboxvfs: Unknown symbol AssertMsg1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3967 buckets, 15868 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
xt_time: kernel timezone is -0400
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 128x48
[drm] fb0: inteldrmfb frame buffer device
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
render error detected, EIR: 0x00000010
[drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
render error detected, EIR: 0x00000010
[drm] DAC-5: set mode 1024x768 11
fuse init (API version 7.12)

6 Ответ от Aleks

  • Aleks
  • Новичок
  • Неактивен
  • Зарегистрирован: 25.07.2010
  • Сообщений: 44
  • Репутация : [ 0 | 0 ]

messages: 

Jun  9 21:43:10 localhost syslogd 1.5.0: restart.
Jun  9 21:43:11 localhost acpid: 7 rules loaded 
Jun  9 21:43:11 localhost acpid: waiting for events: event logging is off 
Jun  9 21:43:12 localhost klogd: klogd 1.5.0, log source = /proc/kmsg started.
Jun  9 21:43:12 localhost klogd: Linux version 2.6.31.5-desktop586-1mnb (herton@n2.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Fri Oct 23 00:21:26 EDT 2009
Jun  9 21:43:12 localhost klogd: KERNEL supported cpus:
Jun  9 21:43:12 localhost klogd:   Intel GenuineIntel
Jun  9 21:43:12 localhost klogd:   AMD AuthenticAMD
Jun  9 21:43:12 localhost klogd:   NSC Geode by NSC
Jun  9 21:43:12 localhost klogd:   Cyrix CyrixInstead
Jun  9 21:43:12 localhost klogd:   Centaur CentaurHauls
Jun  9 21:43:12 localhost klogd:   Transmeta GenuineTMx86
Jun  9 21:43:12 localhost klogd:   Transmeta TransmetaCPU
Jun  9 21:43:12 localhost klogd:   UMC UMC UMC UMC
Jun  9 21:43:12 localhost klogd: BIOS-provided physical RAM map:
Jun  9 21:43:12 localhost klogd:  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jun  9 21:43:12 localhost klogd:  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jun  9 21:43:12 localhost klogd:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jun  9 21:43:12 localhost klogd:  BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
Jun  9 21:43:12 localhost klogd:  BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
Jun  9 21:43:12 localhost klogd:  BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
Jun  9 21:43:12 localhost klogd:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jun  9 21:43:12 localhost klogd: DMI 2.2 present.
Jun  9 21:43:12 localhost klogd: Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
Jun  9 21:43:12 localhost klogd: last_pfn = 0xf7f0 max_arch_pfn = 0x100000
Jun  9 21:43:12 localhost klogd: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jun  9 21:43:12 localhost klogd: init_memory_mapping: 0000000000000000-000000000f7f0000
Jun  9 21:43:12 localhost klogd: RAMDISK: 0f11d000 - 0f7ce22e
Jun  9 21:43:12 localhost klogd: ACPI: RSDP 000f6bb0 00014 (v00 IntelR)
Jun  9 21:43:12 localhost klogd: ACPI: RSDT 0f7f3000 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
Jun  9 21:43:12 localhost klogd: ACPI: FACP 0f7f3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
Jun  9 21:43:12 localhost klogd: ACPI: DSDT 0f7f30c0 03F5B (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
Jun  9 21:43:12 localhost klogd: ACPI: FACS 0f7f0000 00040
Jun  9 21:43:12 localhost klogd: ACPI: APIC 0f7f7040 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
Jun  9 21:43:12 localhost klogd: 0MB HIGHMEM available.
Jun  9 21:43:12 localhost klogd: 247MB LOWMEM available.
Jun  9 21:43:12 localhost klogd:   mapped low ram: 0 - 0f7f0000
Jun  9 21:43:12 localhost klogd:   low ram: 0 - 0f7f0000
Jun  9 21:43:12 localhost klogd:   node 0 low ram: 00000000 - 0f7f0000
Jun  9 21:43:12 localhost klogd:   node 0 bootmap 00012000 - 00013f00
Jun  9 21:43:12 localhost klogd: (9 early reservations) ==> bootmem [0000000000 - 000f7f0000]
Jun  9 21:43:12 localhost klogd:   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Jun  9 21:43:12 localhost klogd:   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Jun  9 21:43:12 localhost klogd:   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Jun  9 21:43:12 localhost klogd:   #3 [0000100000 - 0000700ec4]    TEXT DATA BSS ==> [0000100000 - 0000700ec4]
Jun  9 21:43:12 localhost klogd:   #4 [000f11d000 - 000f7ce22e]          RAMDISK ==> [000f11d000 - 000f7ce22e]
Jun  9 21:43:12 localhost klogd:   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
Jun  9 21:43:12 localhost klogd:   #6 [0000701000 - 000070406e]              BRK ==> [0000701000 - 000070406e]
Jun  9 21:43:12 localhost klogd:   #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
Jun  9 21:43:12 localhost klogd:   #8 [0000012000 - 0000014000]          BOOTMAP ==> [0000012000 - 0000014000]
Jun  9 21:43:12 localhost klogd: found SMP MP-table at [c00f5170] f5170
Jun  9 21:43:12 localhost klogd: Zone PFN ranges:
Jun  9 21:43:12 localhost klogd:   DMA      0x00000010 -> 0x00001000
Jun  9 21:43:12 localhost klogd:   Normal   0x00001000 -> 0x0000f7f0
Jun  9 21:43:12 localhost klogd:   HighMem  0x0000f7f0 -> 0x0000f7f0
Jun  9 21:43:12 localhost klogd: Movable zone start PFN for each node
Jun  9 21:43:12 localhost klogd: early_node_map[2] active PFN ranges
Jun  9 21:43:12 localhost klogd:     0: 0x00000010 -> 0x0000009f
Jun  9 21:43:12 localhost klogd:     0: 0x00000100 -> 0x0000f7f0
Jun  9 21:43:12 localhost klogd: Using APIC driver default
Jun  9 21:43:12 localhost klogd: ACPI: PM-Timer IO Port: 0x408
Jun  9 21:43:12 localhost klogd: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jun  9 21:43:12 localhost klogd: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Jun  9 21:43:12 localhost klogd: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jun  9 21:43:12 localhost klogd: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jun  9 21:43:12 localhost klogd: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jun  9 21:43:12 localhost klogd: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Jun  9 21:43:12 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun  9 21:43:12 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun  9 21:43:12 localhost klogd: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Jun  9 21:43:12 localhost klogd: Using ACPI (MADT) for SMP configuration information
Jun  9 21:43:12 localhost klogd: SMP: Allowing 2 CPUs, 1 hotplug CPUs
Jun  9 21:43:12 localhost klogd: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jun  9 21:43:12 localhost klogd: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Jun  9 21:43:12 localhost klogd: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Jun  9 21:43:12 localhost klogd: Allocating PCI resources starting at f800000 (gap: f800000:ef400000)
Jun  9 21:43:12 localhost klogd: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
Jun  9 21:43:12 localhost klogd: PERCPU: Embedded 14 pages at c11f2000, static data 35132 bytes
Jun  9 21:43:12 localhost klogd: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 62863
Jun  9 21:43:12 localhost klogd: Kernel command line: initrd=/boot/cdrom/initrd.gz splash=silent vga=788 BOOT_IMAGE=/boot/vmlinuz 
Jun  9 21:43:12 localhost klogd: PID hash table entries: 1024 (order: 10, 4096 bytes)
Jun  9 21:43:12 localhost klogd: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun  9 21:43:12 localhost klogd: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jun  9 21:43:12 localhost klogd: Enabling fast FPU save and restore... done.
Jun  9 21:43:12 localhost klogd: Enabling unmasked SIMD FPU exception support... done.
Jun  9 21:43:12 localhost klogd: Initializing CPU#0
Jun  9 21:43:12 localhost klogd: Initializing HighMem for node 0 (00000000:00000000)
Jun  9 21:43:12 localhost klogd: Memory: 237836k/253888k available (3093k kernel code, 15352k reserved, 1885k data, 436k init, 0k highmem)
Jun  9 21:43:12 localhost klogd: virtual kernel memory layout:
Jun  9 21:43:12 localhost klogd:     fixmap  : 0xffd54000 - 0xfffff000   (2732 kB)
Jun  9 21:43:12 localhost klogd:     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
Jun  9 21:43:12 localhost klogd:     vmalloc : 0xcfff0000 - 0xff3fe000   ( 756 MB)
Jun  9 21:43:12 localhost klogd:     lowmem  : 0xc0000000 - 0xcf7f0000   ( 247 MB)
Jun  9 21:43:12 localhost klogd:       .init : 0xc05dd000 - 0xc064a000   ( 436 kB)
Jun  9 21:43:12 localhost klogd:       .data : 0xc0405492 - 0xc05dc8c8   (1885 kB)
Jun  9 21:43:12 localhost klogd:       .text : 0xc0100000 - 0xc0405492   (3093 kB)
Jun  9 21:43:12 localhost klogd: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jun  9 21:43:12 localhost klogd: SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Jun  9 21:43:12 localhost klogd: NR_IRQS:1280
Jun  9 21:43:12 localhost klogd: Fast TSC calibration using PIT
Jun  9 21:43:12 localhost klogd: Detected 2260.723 MHz processor.
Jun  9 21:43:12 localhost klogd: Console: colour dummy device 80x25
Jun  9 21:43:12 localhost klogd: console [tty0] enabled
Jun  9 21:43:12 localhost klogd: Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.44 BogoMIPS (lpj=2260723)
Jun  9 21:43:12 localhost klogd: Security Framework initialized
Jun  9 21:43:12 localhost klogd: TOMOYO Linux initialized
Jun  9 21:43:12 localhost klogd: Mount-cache hash table entries: 512
Jun  9 21:43:12 localhost klogd: CPU: Trace cache: 12K uops, L1 D cache: 16K
Jun  9 21:43:12 localhost klogd: CPU: L2 cache: 256K
Jun  9 21:43:12 localhost klogd: CPU: Hyper-Threading is disabled
Jun  9 21:43:12 localhost klogd: mce: CPU supports 4 MCE banks
Jun  9 21:43:12 localhost klogd: CPU0: Thermal monitoring enabled (TM1)
Jun  9 21:43:12 localhost klogd: using mwait in idle threads.
Jun  9 21:43:12 localhost klogd: Performance Counters: no PMU driver, software counters only.
Jun  9 21:43:12 localhost klogd: Checking 'hlt' instruction... OK.
Jun  9 21:43:12 localhost klogd: SMP alternatives: switching to UP code
Jun  9 21:43:12 localhost klogd: ACPI: Checking initramfs for custom DSDT
Jun  9 21:43:12 localhost klogd: ACPI: Aborted because no cpio magic.
Jun  9 21:43:12 localhost klogd: ACPI: Core revision 20090521
Jun  9 21:43:12 localhost klogd: ftrace: converting mcount calls to 0f 1f 44 00 00
Jun  9 21:43:12 localhost klogd: ftrace: allocating 14182 entries in 28 pages
Jun  9 21:43:12 localhost klogd: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jun  9 21:43:12 localhost klogd: CPU0: Intel(R) Celeron(R) CPU 2.26GHz stepping 04
Jun  9 21:43:12 localhost klogd: Brought up 1 CPUs
Jun  9 21:43:12 localhost klogd: Total of 1 processors activated (4521.44 BogoMIPS).
Jun  9 21:43:12 localhost klogd: devtmpfs: initialized
Jun  9 21:43:12 localhost klogd: Booting paravirtualized kernel on bare hardware
Jun  9 21:43:12 localhost klogd: Time:  1:40:38  Date: 06/10/04
Jun  9 21:43:12 localhost klogd: NET: Registered protocol family 16
Jun  9 21:43:12 localhost klogd: ACPI: bus type pci registered
Jun  9 21:43:12 localhost klogd: PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
Jun  9 21:43:12 localhost klogd: PCI: Using configuration type 1 for base access
Jun  9 21:43:12 localhost klogd: bio: create slab <bio-0> at 0
Jun  9 21:43:12 localhost klogd: ACPI: Interpreter enabled
Jun  9 21:43:12 localhost klogd: ACPI: (supports S0 S3 S4 S5)
Jun  9 21:43:12 localhost klogd: ACPI: Using IOAPIC for interrupt routing
Jun  9 21:43:12 localhost klogd: ACPI: No dock devices found.
Jun  9 21:43:12 localhost klogd: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun  9 21:43:12 localhost klogd: pci 0000:00:00.0: Enabling MCH 'Overflow' Device
Jun  9 21:43:12 localhost klogd: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Jun  9 21:43:12 localhost klogd: pci 0000:00:1d.7: PME# disabled
Jun  9 21:43:12 localhost klogd: pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
Jun  9 21:43:12 localhost klogd: pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
Jun  9 21:43:12 localhost klogd: pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
Jun  9 21:43:12 localhost klogd: pci 0000:00:1f.5: PME# disabled
Jun  9 21:43:12 localhost klogd: pci 0000:01:09.0: PME# supported from D1 D2 D3hot D3cold
Jun  9 21:43:12 localhost klogd: pci 0000:01:09.0: PME# disabled
Jun  9 21:43:12 localhost klogd: pci 0000:00:1e.0: transparent bridge
Jun  9 21:43:12 localhost klogd: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Jun  9 21:43:12 localhost klogd: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Jun  9 21:43:12 localhost klogd: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Jun  9 21:43:12 localhost klogd: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Jun  9 21:43:12 localhost klogd: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Jun  9 21:43:12 localhost klogd: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Jun  9 21:43:12 localhost klogd: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Jun  9 21:43:12 localhost klogd: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Jun  9 21:43:12 localhost klogd: PCI: Using ACPI for IRQ routing
Jun  9 21:43:12 localhost klogd: NetLabel: Initializing
Jun  9 21:43:12 localhost klogd: NetLabel:  domain hash size = 128
Jun  9 21:43:12 localhost klogd: NetLabel:  protocols = UNLABELED CIPSOv4
Jun  9 21:43:12 localhost klogd: NetLabel:  unlabeled traffic allowed by default
Jun  9 21:43:12 localhost klogd: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Jun  9 21:43:12 localhost klogd: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jun  9 21:43:12 localhost klogd: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Jun  9 21:43:12 localhost klogd: pnp: PnP ACPI init
Jun  9 21:43:12 localhost klogd: ACPI: bus type pnp registered
Jun  9 21:43:12 localhost klogd: pnp: PnP ACPI: found 15 devices
Jun  9 21:43:12 localhost klogd: ACPI: ACPI bus type pnp unregistered
Jun  9 21:43:12 localhost klogd: PnPBIOS: Disabled
Jun  9 21:43:12 localhost klogd: system 00:01: ioport range 0xb78-0xb7b has been reserved
Jun  9 21:43:12 localhost klogd: system 00:01: ioport range 0xf78-0xf7b has been reserved
Jun  9 21:43:12 localhost klogd: system 00:01: ioport range 0xa78-0xa7b has been reserved
Jun  9 21:43:12 localhost klogd: system 00:01: ioport range 0xe78-0xe7b has been reserved
Jun  9 21:43:12 localhost klogd: system 00:01: ioport range 0xbbc-0xbbf has been reserved
Jun  9 21:43:12 localhost klogd: system 00:01: ioport range 0xfbc-0xfbf has been reserved
Jun  9 21:43:12 localhost klogd: system 00:01: ioport range 0x4d0-0x4d1 has been reserved
Jun  9 21:43:12 localhost klogd: system 00:01: ioport range 0x294-0x297 has been reserved
Jun  9 21:43:12 localhost klogd: system 00:0c: ioport range 0x400-0x4bf could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xf0000-0xf3fff could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xf4000-0xf7fff could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xf7f0000-0xf7fffff could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0x0-0x9ffff could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0x100000-0xf7effff could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xfec01000-0xfed8ffff could not be reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xffb00000-0xffb7ffff has been reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved
Jun  9 21:43:12 localhost klogd: system 00:0e: iomem range 0xe0000-0xeffff has been reserved
Jun  9 21:43:12 localhost klogd: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
Jun  9 21:43:12 localhost klogd: pci 0000:00:1e.0:   IO window: 0x9000-0x9fff
Jun  9 21:43:12 localhost klogd: pci 0000:00:1e.0:   MEM window: 0xf8000000-0xf80fffff
Jun  9 21:43:12 localhost klogd: pci 0000:00:1e.0:   PREFETCH window: disabled
Jun  9 21:43:12 localhost klogd: NET: Registered protocol family 2
Jun  9 21:43:12 localhost klogd: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jun  9 21:43:12 localhost klogd: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jun  9 21:43:12 localhost klogd: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jun  9 21:43:12 localhost klogd: TCP: Hash tables configured (established 8192 bind 8192)
Jun  9 21:43:12 localhost klogd: TCP reno registered
Jun  9 21:43:12 localhost klogd: NET: Registered protocol family 1
Jun  9 21:43:12 localhost klogd: Trying to unpack rootfs image as initramfs...
Jun  9 21:43:12 localhost klogd: rootfs image is not initramfs (no cpio magic); looks like an initrd
Jun  9 21:43:12 localhost klogd: Freeing initrd memory: 6852k freed
Jun  9 21:43:12 localhost klogd: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Jun  9 21:43:12 localhost klogd: apm: overridden by ACPI.
Jun  9 21:43:12 localhost klogd: audit: initializing netlink socket (disabled)
Jun  9 21:43:12 localhost klogd: type=2000 audit(1086831638.173:1): initialized
Jun  9 21:43:12 localhost klogd: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Jun  9 21:43:12 localhost klogd: VFS: Disk quotas dquot_6.5.2
Jun  9 21:43:12 localhost klogd: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun  9 21:43:12 localhost klogd: msgmni has been set to 478
Jun  9 21:43:12 localhost klogd: alg: No test for stdrng (krng)
Jun  9 21:43:12 localhost klogd: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jun  9 21:43:12 localhost klogd: io scheduler noop registered
Jun  9 21:43:12 localhost klogd: io scheduler anticipatory registered
Jun  9 21:43:12 localhost klogd: io scheduler deadline registered
Jun  9 21:43:12 localhost klogd: io scheduler cfq registered (default)
Jun  9 21:43:12 localhost klogd: vesafb: framebuffer at 0xf0000000, mapped to 0xd0080000, using 1875k, total 8000k
Jun  9 21:43:12 localhost klogd: vesafb: mode is 800x600x16, linelength=1600, pages=7
Jun  9 21:43:12 localhost klogd: vesafb: scrolling: redraw
Jun  9 21:43:12 localhost klogd: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Jun  9 21:43:12 localhost klogd: Console: switching to colour frame buffer device 100x37
Jun  9 21:43:12 localhost klogd: fb0: VESA VGA frame buffer device
Jun  9 21:43:12 localhost klogd: isapnp: Scanning for PnP cards...
Jun  9 21:43:12 localhost klogd: isapnp: No Plug & Play device found
Jun  9 21:43:12 localhost klogd: Linux agpgart interface v0.103
Jun  9 21:43:12 localhost klogd: agpgart-intel 0000:00:00.0: Intel 865 Chipset
Jun  9 21:43:12 localhost klogd: agpgart-intel 0000:00:00.0: detected 8060K stolen memory
Jun  9 21:43:12 localhost klogd: agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
Jun  9 21:43:12 localhost klogd: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jun  9 21:43:12 localhost klogd: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun  9 21:43:12 localhost klogd: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jun  9 21:43:12 localhost klogd: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun  9 21:43:12 localhost klogd: 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jun  9 21:43:12 localhost klogd: brd: module loaded
Jun  9 21:43:12 localhost klogd: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jun  9 21:43:12 localhost klogd: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun  9 21:43:12 localhost klogd: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun  9 21:43:12 localhost klogd: mice: PS/2 mouse device common for all mice
Jun  9 21:43:12 localhost klogd: rtc_cmos 00:03: RTC can wake from S4
Jun  9 21:43:12 localhost klogd: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Jun  9 21:43:12 localhost klogd: rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Jun  9 21:43:12 localhost klogd: cpuidle: using governor ladder
Jun  9 21:43:12 localhost klogd: cpuidle: using governor menu
Jun  9 21:43:12 localhost klogd: TCP cubic registered
Jun  9 21:43:12 localhost klogd: Using IPI No-Shortcut mode
Jun  9 21:43:12 localhost klogd: registered taskstats version 1
Jun  9 21:43:12 localhost klogd: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Jun  9 21:43:12 localhost klogd:   Magic number: 8:983:659
Jun  9 21:43:12 localhost klogd: block ram12: hash matches
Jun  9 21:43:12 localhost klogd: rtc_cmos 00:03: setting system clock to 2004-06-10 01:40:39 UTC (1086831639)
Jun  9 21:43:12 localhost klogd: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Jun  9 21:43:12 localhost klogd: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
Jun  9 21:43:12 localhost klogd: md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
Jun  9 21:43:12 localhost klogd: RAMDISK: gzip image found at block 0
Jun  9 21:43:12 localhost klogd: VFS: Mounted root (ext2 filesystem) on device 1:0.
Jun  9 21:43:12 localhost klogd: Uniform Multi-Platform E-IDE driver
Jun  9 21:43:12 localhost klogd: ide-cd driver 5.00
Jun  9 21:43:12 localhost klogd: SCSI subsystem initialized
Jun  9 21:43:12 localhost klogd: usbcore: registered new interface driver usbfs
Jun  9 21:43:12 localhost klogd: usbcore: registered new interface driver hub
Jun  9 21:43:12 localhost klogd: usbcore: registered new device driver usb
Jun  9 21:43:12 localhost klogd: Initializing USB Mass Storage driver...
Jun  9 21:43:12 localhost klogd: usbcore: registered new interface driver usb-storage
Jun  9 21:43:12 localhost klogd: USB Mass Storage support registered.
Jun  9 21:43:12 localhost klogd: uhci_hcd: USB Universal Host Controller Interface driver
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a000
Jun  9 21:43:12 localhost klogd: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Jun  9 21:43:12 localhost klogd: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun  9 21:43:12 localhost klogd: usb usb1: Product: UHCI Host Controller
Jun  9 21:43:12 localhost klogd: usb usb1: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
Jun  9 21:43:12 localhost klogd: usb usb1: SerialNumber: 0000:00:1d.0
Jun  9 21:43:12 localhost klogd: usb usb1: configuration #1 chosen from 1 choice
Jun  9 21:43:12 localhost klogd: hub 1-0:1.0: USB hub found
Jun  9 21:43:12 localhost klogd: hub 1-0:1.0: 2 ports detected
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
Jun  9 21:43:12 localhost klogd: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jun  9 21:43:12 localhost klogd: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun  9 21:43:12 localhost klogd: usb usb2: Product: UHCI Host Controller
Jun  9 21:43:12 localhost klogd: usb usb2: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
Jun  9 21:43:12 localhost klogd: usb usb2: SerialNumber: 0000:00:1d.1
Jun  9 21:43:12 localhost klogd: usb usb2: configuration #1 chosen from 1 choice
Jun  9 21:43:12 localhost klogd: hub 2-0:1.0: USB hub found
Jun  9 21:43:12 localhost klogd: hub 2-0:1.0: 2 ports detected
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a800
Jun  9 21:43:12 localhost klogd: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jun  9 21:43:12 localhost klogd: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun  9 21:43:12 localhost klogd: usb usb3: Product: UHCI Host Controller
Jun  9 21:43:12 localhost klogd: usb usb3: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
Jun  9 21:43:12 localhost klogd: usb usb3: SerialNumber: 0000:00:1d.2
Jun  9 21:43:12 localhost klogd: usb usb3: configuration #1 chosen from 1 choice
Jun  9 21:43:12 localhost klogd: hub 3-0:1.0: USB hub found
Jun  9 21:43:12 localhost klogd: hub 3-0:1.0: 2 ports detected
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jun  9 21:43:12 localhost klogd: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ac00
Jun  9 21:43:12 localhost klogd: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jun  9 21:43:12 localhost klogd: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun  9 21:43:12 localhost klogd: usb usb4: Product: UHCI Host Controller
Jun  9 21:43:12 localhost klogd: usb usb4: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
Jun  9 21:43:12 localhost klogd: usb usb4: SerialNumber: 0000:00:1d.3
Jun  9 21:43:12 localhost klogd: usb usb4: configuration #1 chosen from 1 choice
Jun  9 21:43:12 localhost klogd: hub 4-0:1.0: USB hub found
Jun  9 21:43:12 localhost klogd: hub 4-0:1.0: 2 ports detected
Jun  9 21:43:12 localhost klogd: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jun  9 21:43:12 localhost klogd: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jun  9 21:43:12 localhost klogd: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Jun  9 21:43:12 localhost klogd: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Jun  9 21:43:12 localhost klogd: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun  9 21:43:12 localhost klogd: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jun  9 21:43:12 localhost klogd: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8180000
Jun  9 21:43:12 localhost klogd: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jun  9 21:43:12 localhost klogd: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Jun  9 21:43:12 localhost klogd: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun  9 21:43:12 localhost klogd: usb usb5: Product: EHCI Host Controller
Jun  9 21:43:12 localhost klogd: usb usb5: Manufacturer: Linux 2.6.31.5-desktop586-1mnb ehci_hcd
Jun  9 21:43:12 localhost klogd: usb usb5: SerialNumber: 0000:00:1d.7
Jun  9 21:43:12 localhost klogd: usb usb5: configuration #1 chosen from 1 choice
Jun  9 21:43:12 localhost klogd: hub 5-0:1.0: USB hub found
Jun  9 21:43:12 localhost klogd: hub 5-0:1.0: 8 ports detected
Jun  9 21:43:12 localhost klogd: loop: module loaded
Jun  9 21:43:12 localhost klogd: squashfs: version 3.3 (2007/10/31) Phillip Lougher
Jun  9 21:43:12 localhost klogd: squashfs: LZMA suppport for slax.org by jro
Jun  9 21:43:12 localhost klogd: Registering unionfs 1.4
Jun  9 21:43:12 localhost klogd: unionfs: debugging is not enabled
Jun  9 21:43:12 localhost klogd: usb 5-7: new high speed USB device using ehci_hcd and address 2
Jun  9 21:43:12 localhost klogd: usb 5-7: New USB device found, idVendor=13fe, idProduct=1a00
Jun  9 21:43:12 localhost klogd: usb 5-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun  9 21:43:12 localhost klogd: usb 5-7: Product: DataTraveler 2.0
Jun  9 21:43:12 localhost klogd: usb 5-7: Manufacturer: Kingston
Jun  9 21:43:12 localhost klogd: usb 5-7: SerialNumber: 5B77058D280A
Jun  9 21:43:12 localhost klogd: usb 5-7: configuration #1 chosen from 1 choice
Jun  9 21:43:12 localhost klogd: scsi0 : SCSI emulation for USB Mass Storage devices
Jun  9 21:43:12 localhost klogd: ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Jun  9 21:43:12 localhost klogd: scsi1 : ata_piix
Jun  9 21:43:12 localhost klogd: scsi2 : ata_piix
Jun  9 21:43:12 localhost klogd: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
Jun  9 21:43:12 localhost klogd: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Jun  9 21:43:12 localhost klogd: ata2.00: ATAPI: SONY    CD-ROM CDU5212, 5YS1, max UDMA/33
Jun  9 21:43:12 localhost klogd: ata1.00: ATA-7: SAMSUNG SP0401N, TJ100-30, max UDMA/100
Jun  9 21:43:12 localhost klogd: ata1.00: 78242976 sectors, multi 16: LBA48 
Jun  9 21:43:12 localhost klogd: ata2.00: configured for UDMA/33
Jun  9 21:43:12 localhost klogd: ata1.00: configured for UDMA/100
Jun  9 21:43:12 localhost klogd: scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP0401N  TJ10 PQ: 0 ANSI: 5
Jun  9 21:43:12 localhost klogd: sd 1:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
Jun  9 21:43:12 localhost klogd: sd 1:0:0:0: [sda] Write Protect is off
Jun  9 21:43:12 localhost klogd: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun  9 21:43:12 localhost klogd:  sda:
Jun  9 21:43:12 localhost klogd: scsi 2:0:0:0: CD-ROM            SONY     CD-ROM CDU5212   5YS1 PQ: 0 ANSI: 5
Jun  9 21:43:12 localhost klogd: sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Jun  9 21:43:12 localhost klogd: Uniform CD-ROM driver Revision: 3.20
Jun  9 21:43:12 localhost klogd:  sda1
Jun  9 21:43:12 localhost klogd: sd 1:0:0:0: [sda] Attached SCSI disk
Jun  9 21:43:12 localhost klogd: scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
Jun  9 21:43:12 localhost klogd: sd 0:0:0:0: [sdb] 1007616 512-byte logical blocks: (515 MB/492 MiB)
Jun  9 21:43:12 localhost klogd: sd 0:0:0:0: [sdb] Write Protect is off
Jun  9 21:43:12 localhost klogd: sd 0:0:0:0: [sdb] Assuming drive cache: write through
Jun  9 21:43:12 localhost klogd: sd 0:0:0:0: [sdb] Assuming drive cache: write through
Jun  9 21:43:12 localhost klogd:  sdb: sdb1
Jun  9 21:43:12 localhost klogd: sd 0:0:0:0: [sdb] Assuming drive cache: write through
Jun  9 21:43:12 localhost klogd: sd 0:0:0:0: [sdb] Attached SCSI removable disk
Jun  9 21:43:12 localhost klogd: ------------[ cut here ]------------
Jun  9 21:43:12 localhost klogd: WARNING: at fs/namei.c:1270 lookup_one_len+0xcf/0xf0()
Jun  9 21:43:12 localhost klogd: Hardware name:  
Jun  9 21:43:12 localhost klogd: Modules linked in: ahci ata_piix libata unionfs squashfs sqlzma unlzma loop ehci_hcd ohci_hcd uhci_hcd usb_storage usbcore sd_mod crc_t10dif vfat fat isofs nls_utf8 nls_iso8859_15 nls_iso8859_14 nls_iso8859_13 nls_iso8859_9 nls_iso8859_7 nls_iso8859_6 nls_iso8859_5 nls_iso8859_4 nls_iso8859_3 nls_iso8859_2 nls_iso8859_1 sr_mod scsi_mod ide_cd_mod ide_core
Jun  9 21:43:12 localhost klogd: Pid: 25, comm: plymouthd Not tainted 2.6.31.5-desktop586-1mnb #1
Jun  9 21:43:12 localhost klogd: Call Trace:
Jun  9 21:43:12 localhost klogd:  [<c0140f62>] warn_slowpath_common+0x72/0xa0
Jun  9 21:43:12 localhost klogd:  [<c01e79df>] ? lookup_one_len+0xcf/0xf0
Jun  9 21:43:12 localhost klogd:  [<c01e79df>] ? lookup_one_len+0xcf/0xf0
Jun  9 21:43:12 localhost klogd:  [<c0140faa>] warn_slowpath_null+0x1a/0x20
Jun  9 21:43:12 localhost klogd:  [<c01e79df>] lookup_one_len+0xcf/0xf0
Jun  9 21:43:12 localhost klogd:  [<c0287a55>] ? strlcat+0x25/0x70
Jun  9 21:43:12 localhost klogd:  [<d0599517>] unionfs_lookup_backend+0x3b7/0x8d0 [unionfs]
Jun  9 21:43:12 localhost klogd:  [<c020dde1>] ? ep_poll_callback+0x91/0xc0
Jun  9 21:43:12 localhost klogd:  [<c0130f6c>] ? __wake_up_sync_key+0x4c/0x60
Jun  9 21:43:12 localhost klogd:  [<c03e1c4e>] ? unix_stream_recvmsg+0x1ae/0x4e0
Jun  9 21:43:12 localhost klogd:  [<d0591144>] unionfs_lookup+0x34/0x60 [unionfs]
Jun  9 21:43:12 localhost klogd:  [<c01e6ab5>] ? path_put+0x25/0x30
Jun  9 21:43:12 localhost klogd:  [<c01e5e61>] ? inode_permission+0x91/0xb0
Jun  9 21:43:12 localhost klogd:  [<c01e66ea>] ? getname+0x2a/0xe0
Jun  9 21:43:12 localhost klogd:  [<c01e7639>] do_lookup+0x139/0x1a0
Jun  9 21:43:12 localhost klogd:  [<c01e7c73>] __link_path_walk+0x133/0xc60
Jun  9 21:43:12 localhost klogd:  [<c01f3f7f>] ? mntput_no_expire+0x1f/0xd0
Jun  9 21:43:12 localhost klogd:  [<c01df1bf>] ? get_empty_filp+0xcf/0x1c0
Jun  9 21:43:12 localhost klogd:  [<c01e8946>] path_walk+0x46/0xa0
Jun  9 21:43:12 localhost klogd:  [<c01e89f9>] do_path_lookup+0x59/0x90
Jun  9 21:43:12 localhost klogd:  [<c01e983d>] do_filp_open+0xad/0x920
Jun  9 21:43:12 localhost klogd:  [<c01f3f7f>] ? mntput_no_expire+0x1f/0xd0
Jun  9 21:43:12 localhost klogd:  [<c01e6ab5>] ? path_put+0x25/0x30
Jun  9 21:43:12 localhost klogd:  [<c01e5e61>] ? inode_permission+0x91/0xb0
Jun  9 21:43:12 localhost klogd:  [<c01e66ea>] ? getname+0x2a/0xe0
Jun  9 21:43:12 localhost klogd:  [<c01dbd55>] do_sys_open+0x55/0x160
Jun  9 21:43:12 localhost klogd:  [<c01dbece>] sys_open+0x2e/0x40
Jun  9 21:43:12 localhost klogd:  [<c0103e4c>] syscall_call+0x7/0xb
Jun  9 21:43:12 localhost klogd: ---[ end trace 65faae1c691f8d5a ]---
Jun  9 21:43:12 localhost klogd: Freeing unused kernel memory: 436k freed
Jun  9 21:43:12 localhost klogd: Tomoyo security MAC extension available but disabled by default. If you want to
Jun  9 21:43:12 localhost klogd: enable and use it, ccs-tools package must be installed.
Jun  9 21:43:12 localhost klogd: sd 1:0:0:0: Attached scsi generic sg0 type 0
Jun  9 21:43:12 localhost klogd: sr 2:0:0:0: Attached scsi generic sg1 type 5
Jun  9 21:43:13 localhost klogd: sd 0:0:0:0: Attached scsi generic sg2 type 0
Jun  9 21:43:13 localhost klogd: input: PC Speaker as /devices/platform/pcspkr/input/input2
Jun  9 21:43:13 localhost klogd: processor LNXCPU:00: registered as cooling_device0
Jun  9 21:43:13 localhost klogd: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jun  9 21:43:13 localhost klogd: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun  9 21:43:13 localhost klogd: thermal LNXTHERM:01: registered as thermal_zone0
Jun  9 21:43:13 localhost klogd: ACPI: Thermal Zone [THRM] (52 C)
Jun  9 21:43:13 localhost klogd: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun  9 21:43:13 localhost klogd: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Jun  9 21:43:13 localhost klogd: ACPI: Power Button [PWRF]
Jun  9 21:43:13 localhost klogd: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
Jun  9 21:43:13 localhost klogd: ACPI: Power Button [PWRB]
Jun  9 21:43:13 localhost klogd: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
Jun  9 21:43:13 localhost klogd: ACPI: Sleep Button [SLPB]
Jun  9 21:43:13 localhost klogd: fan PNP0C0B:00: registered as cooling_device1
Jun  9 21:43:13 localhost klogd: ACPI: Fan [FAN] (on)
Jun  9 21:43:13 localhost klogd: Floppy drive(s): fd0 is 1.44M
Jun  9 21:43:13 localhost klogd: FDC 0 is a post-1991 82077
Jun  9 21:43:13 localhost klogd: parport_pc 00:09: reported by Plug and Play ACPI
Jun  9 21:43:13 localhost klogd: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Jun  9 21:43:13 localhost klogd: ppdev: user-space parallel port driver
Jun  9 21:43:13 localhost klogd: iTCO_vendor_support: vendor-support=0
Jun  9 21:43:13 localhost klogd: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
Jun  9 21:43:13 localhost klogd: iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
Jun  9 21:43:13 localhost klogd: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
Jun  9 21:43:13 localhost klogd: intel_rng: FWH not detected
Jun  9 21:43:13 localhost klogd: Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jun  9 21:43:13 localhost klogd: intel8x0_measure_ac97_clock: measured 51063 usecs (2461 samples)
Jun  9 21:43:13 localhost klogd: intel8x0: clocking to 48000
Jun  9 21:43:13 localhost klogd: 8139too Fast Ethernet driver 0.9.28
Jun  9 21:43:13 localhost klogd: 8139too 0000:01:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Jun  9 21:43:13 localhost klogd: eth0: RealTek RTL8139 at 0xd0bae000, 00:11:5b:76:bd:f8, IRQ 21
Jun  9 21:43:13 localhost klogd: <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Jun  9 21:43:13 localhost klogd: saa7146: register extension 'budget dvb'.
Jun  9 21:43:13 localhost klogd: budget dvb 0000:01:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Jun  9 21:43:13 localhost klogd: IRQ 19/: IRQF_DISABLED is not guaranteed on shared IRQs
Jun  9 21:43:13 localhost klogd: saa7146: found saa7146 @ mem d0bf4000 (revision 1, irq 19) (0x13c2,0x1018).
Jun  9 21:43:13 localhost klogd: saa7146 (0): dma buffer size 192512
Jun  9 21:43:13 localhost klogd: DVB: registering new adapter (TT-Budget-S-1401 PCI)
Jun  9 21:43:13 localhost klogd: adapter has MAC addr = 00:d0:5c:b8:04:21
Jun  9 21:43:13 localhost klogd: LNBx2x attached on addr=8
Jun  9 21:43:13 localhost klogd: DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)...
Jun  9 21:43:13 localhost klogd: vboxadd: VirtualBox Guest PCI device not found.
Jun  9 21:43:13 localhost klogd: vboxadd: VirtualBox Guest PCI device not found.
Jun  9 21:43:13 localhost klogd: vboxvfs: Unknown symbol vboxadd_cmc_open
Jun  9 21:43:13 localhost klogd: vboxvfs: Unknown symbol RTLogBackdoorPrintf
Jun  9 21:43:13 localhost klogd: vboxvfs: Unknown symbol vboxadd_cmc_ctl_guest_filter_mask
Jun  9 21:43:13 localhost klogd: vboxvfs: Unknown symbol RTErrConvertToErrno
Jun  9 21:43:13 localhost klogd: vboxvfs: Unknown symbol vboxadd_cmc_call
Jun  9 21:43:13 localhost klogd: vboxvfs: Unknown symbol vboxadd_cmc_close
Jun  9 21:43:13 localhost klogd: vboxvfs: Unknown symbol AssertMsg2
Jun  9 21:43:13 localhost klogd: vboxvfs: Unknown symbol RTAssertShouldPanic
Jun  9 21:43:13 localhost klogd: vboxvfs: Unknown symbol AssertMsg1
Jun  9 21:43:13 localhost klogd: device-mapper: uevent: version 1.0.3
Jun  9 21:43:13 localhost klogd: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Jun  9 21:43:13 localhost klogd: usbcore: registered new interface driver hiddev
Jun  9 21:43:13 localhost klogd: usbcore: registered new interface driver usbhid
Jun  9 21:43:13 localhost klogd: usbhid: v2.6:USB HID core driver
Jun  9 21:43:13 localhost klogd: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Jun  9 21:43:13 localhost klogd: ip_tables: (C) 2000-2006 Netfilter Core Team
Jun  9 21:43:13 localhost klogd: Netfilter messages via NETLINK v0.30.
Jun  9 21:43:13 localhost klogd: nf_conntrack version 0.5.0 (3967 buckets, 15868 max)
Jun  9 21:43:13 localhost klogd: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Jun  9 21:43:13 localhost klogd: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Jun  9 21:43:13 localhost klogd: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jun  9 21:43:13 localhost klogd: ctnetlink v0.93: registering with nfnetlink.
Jun  9 21:43:13 localhost klogd: ClusterIP Version 0.8 loaded successfully
Jun  9 21:43:13 localhost klogd: xt_time: kernel timezone is -0400
Jun  9 21:43:13 localhost klogd: netfilter PSD loaded - (c) astaro AG
Jun  9 21:43:13 localhost klogd: IFWLOG: register target
Jun  9 21:43:15 localhost klogd: NET: Registered protocol family 10
Jun  9 21:43:15 localhost klogd: lo: Disabled Privacy Extensions
Jun  9 21:43:20 localhost ifplugd(eth0)[1842]: ifplugd 0.28 initializing.
Jun  9 21:43:20 localhost klogd: eth0: link down
Jun  9 21:43:20 localhost klogd: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun  9 21:43:20 localhost ifplugd(eth0)[1842]: Using interface eth0/00:11:5B:76:BD:F8 with driver <8139too> (version: 0.9.28)
Jun  9 21:43:20 localhost ifplugd(eth0)[1842]: Using detection mode: SIOCETHTOOL
Jun  9 21:43:20 localhost ifplugd(eth0)[1842]: Initialization complete, link beat not detected.
Jun  9 21:43:29 localhost avahi-daemon[2144]: Found user 'avahi' (UID 15) and group 'avahi' (GID 103).
Jun  9 21:43:29 localhost avahi-daemon[2144]: Successfully dropped root privileges.
Jun  9 21:43:29 localhost avahi-daemon[2144]: avahi-daemon 0.6.25 starting up.
Jun  9 21:43:29 localhost avahi-daemon[2144]: Successfully called chroot().
Jun  9 21:43:29 localhost avahi-daemon[2144]: Successfully dropped remaining capabilities.
Jun  9 21:43:29 localhost avahi-daemon[2144]: Loading service file /services/openssh.service.
Jun  9 21:43:30 localhost avahi-daemon[2144]: Loading service file /services/sftp-ssh.service.
Jun  9 21:43:30 localhost avahi-daemon[2144]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
Jun  9 21:43:30 localhost avahi-daemon[2144]: Network interface enumeration completed.
Jun  9 21:43:30 localhost avahi-daemon[2144]: Registering HINFO record with values 'I686'/'LINUX'.
Jun  9 21:43:30 localhost avahi-daemon[2144]: Server startup complete. Host name is linux.local. Local service cookie is 527590030.
Jun  9 21:43:30 localhost avahi-daemon[2144]: Service "SFTP File Transfer on linux" (/services/sftp-ssh.service) successfully established.
Jun  9 21:43:30 localhost avahi-daemon[2144]: Service "Remote Access on linux" (/services/openssh.service) successfully established.
Jun  9 21:43:30 localhost acpid: client connected from 2166[18:18] 
Jun  9 21:43:30 localhost acpid: 1 client rule loaded 
Jun  9 21:43:35 localhost acpid: client connected from 2240[0:0] 
Jun  9 21:43:35 localhost acpid: 1 client rule loaded 
Jun  9 21:43:36 localhost klogd: [drm] Initialized drm 1.1.0 20060810
Jun  9 21:43:36 localhost klogd: i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun  9 21:43:36 localhost klogd: fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Jun  9 21:43:36 localhost klogd: Console: switching to colour dummy device 80x25
Jun  9 21:43:36 localhost klogd: Console: switching to colour frame buffer device 128x48
Jun  9 21:43:36 localhost klogd: [drm] fb0: inteldrmfb frame buffer device
Jun  9 21:43:36 localhost klogd: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Jun  9 21:43:36 localhost klogd: render error detected, EIR: 0x00000010
Jun  9 21:43:36 localhost klogd: [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
Jun  9 21:43:36 localhost klogd: render error detected, EIR: 0x00000010
Jun  9 21:43:36 localhost klogd: [drm] DAC-5: set mode 1024x768 11
Jun  9 21:43:51 localhost finish-install[2292]: ### Program is starting ###
Jun  9 21:43:57 localhost finish-install[2292]: calling ask_language
Jun  9 21:44:02 localhost finish-install[2292]: i18n_env: lang:en_US country:US locale|lang:en_US.UTF-8 locale|country:en_US.UTF-8 LANGUAGE:en_US.UTF-8:en_US:en
Jun  9 21:44:02 localhost finish-install[2292]: i18n_env: lang:en_US country:US locale|lang:en_US.UTF-8 locale|country:en_US.UTF-8 LANGUAGE:en_US.UTF-8:en_US:en
Jun  9 21:44:02 localhost finish-install[2292]: Set system font to "lat0-16"
Jun  9 21:44:03 localhost finish-install[2292]: copied recursively /usr/lib/kbd/consolefonts/lat0-16.psfu.gz to /etc/sysconfig/console/consolefonts
Jun  9 21:44:03 localhost finish-install[2292]: Setting l10n configuration in "/etc/sysconfig/i18n"
Jun  9 21:44:03 localhost finish-install[2292]: running: grub-gfxmenu --quiet --lang en_US
Jun  9 21:44:04 localhost finish-install[2292]: modified file /etc/qtrc
Jun  9 21:44:04 localhost finish-install[2292]: reading /etc/kderc
Jun  9 21:44:04 localhost finish-install[2292]: running: update-alternatives --set oobr_bootstraprc /usr/lib/ooo/program/bootstraprc.ooo
Jun  9 21:44:05 localhost finish-install[2292]: calling ask_license
Jun  9 21:44:09 localhost finish-install[2292]: calling ask_timezone
Jun  9 21:44:14 localhost finish-install[2292]: modified file /etc/ntp.conf
Jun  9 21:44:14 localhost finish-install[2292]: running: chkconfig --del ntpd
Jun  9 21:44:15 localhost finish-install[2292]: running: /etc/rc.d/init.d/ntpd stop
Jun  9 21:44:16 localhost finish-install[2292]: copied recursively /usr/share/zoneinfo/America/New_York to /etc/localtime
Jun  9 21:44:16 localhost finish-install[2292]: modified file /etc/sysconfig/clock
Jun  9 21:44:16 localhost finish-install[2292]: running: xset s off
Jun  9 21:44:16 localhost finish-install[2292]: running: xset -dpms
Jun  9 21:44:16 localhost finish-install[2292]: running: hwclock --hctosys --localtime
Jun 10 01:44:17 localhost finish-install[2292]: running: xset +dpms
Jun 10 01:44:17 localhost finish-install[2292]: running: xset s on
Jun 10 01:44:17 localhost finish-install[2292]: running: xset s reset
Jun 10 01:44:17 localhost finish-install[2292]: calling ask_country
Jun 10 01:44:17 localhost finish-install[2292]: i18n_env: lang:en_US country:US locale|lang:en_US.UTF-8 locale|country:en_US.UTF-8 LANGUAGE:en_US.UTF-8:en_US:en
Jun 10 01:44:17 localhost finish-install[2292]: Set system font to "lat0-16"
Jun 10 01:44:17 localhost finish-install[2292]: copied recursively /usr/lib/kbd/consolefonts/lat0-16.psfu.gz to /etc/sysconfig/console/consolefonts
Jun 10 01:44:17 localhost finish-install[2292]: Setting l10n configuration in "/etc/sysconfig/i18n"
Jun 10 01:44:17 localhost finish-install[2292]: running: grub-gfxmenu --quiet --lang en_US
Jun 10 01:44:17 localhost finish-install[2292]: modified file /etc/qtrc
Jun 10 01:44:17 localhost finish-install[2292]: reading /etc/kderc
Jun 10 01:44:17 localhost finish-install[2292]: running: update-alternatives --set oobr_bootstraprc /usr/lib/ooo/program/bootstraprc.ooo
Jun 10 01:44:17 localhost finish-install[2292]: calling ask_keyboard
Jun 10 01:44:19 localhost finish-install[2292]: running: setxkbmap -option 
Jun 10 01:44:19 localhost finish-install[2292]: running: setxkbmap us -model pc105 -option compose:rwin -compat 
Jun 10 01:44:19 localhost finish-install[2292]: keyboard::write us
Jun 10 01:44:19 localhost finish-install[2292]: modified file /etc/sysconfig/keyboard
Jun 10 01:44:19 localhost finish-install[2292]: running: dumpkeys 
Jun 10 01:44:19 localhost finish-install[2292]: running: mandriva-setup-keyboard 
Jun 10 01:44:20 localhost finish-install[2292]: launched command: /etc/init.d/keytable restart
Jun 10 01:44:20 localhost finish-install[2292]: ignoring ask_network
Jun 10 01:44:20 localhost finish-install[2292]: ignoring ask_urpmi
Jun 10 01:44:20 localhost finish-install[2292]: ignoring ask_authentication
Jun 10 01:44:20 localhost finish-install[2292]: ignoring ask_users
Jun 10 01:44:20 localhost finish-install[2292]: calling ask_encrypt_home
Jun 10 01:44:20 localhost finish-install[2292]: calling ask_glx
Jun 10 01:44:20 localhost finish-install[2292]: modified file /etc/sysconfig/finish-install
Jun 10 01:44:20 localhost finish-install[2292]: ### Program is exiting ###
Jun 10 01:46:21 localhost rtkit-daemon[2894]: Sucessfully made thread 2892 of process 2892 (/usr/bin/pulseaudio) owned by '10001' high priority at nice level -11. 
Jun 10 01:50:22 localhost rtkit-daemon[2894]: Warning: PolicyKit call failed: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. 
Jun 10 01:50:22 localhost rtkit-daemon[2894]: Sucessfully made thread 2935 of process 2935 (/usr/bin/pulseaudio) owned by '10001' high priority at nice level -10. 
Jun 10 01:50:23 localhost pulseaudio[2935]: pid.c: Daemon already running.
Jun 10 01:50:23 localhost rtkit-daemon[2894]: Sucessfully made thread 2937 of process 2937 (/usr/bin/pulseaudio) owned by '10001' high priority at nice level -11. 
Jun 10 01:50:23 localhost pulseaudio[2937]: pid.c: Daemon already running.
Jun 10 01:52:30 localhost draksnapshot-applet[2926]: ### Program is starting ###
Jun 10 01:55:24 localhost klogd: fuse init (API version 7.12)

7 Ответ от Aleks (25.07.2010 17:46:35 отредактировано Aleks)

  • Aleks
  • Новичок
  • Неактивен
  • Зарегистрирован: 25.07.2010
  • Сообщений: 44
  • Репутация : [ 0 | 0 ]

prcsys.log

Starting VirtualBox Guest Addition service VirtualBox Additions module not loaded!
Starting acpi daemon: [  OK  ]
Starting irqbalance: [  OK  ]
Starting atd: [  OK  ]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Starting resolvconf: [  OK  ]
ALSA driver is already running.Doing alsactl to restore mixer settings: [  OK  ]
Setting mixer settings [  OK  ]
Starting system message bus: [  OK  ]
Checking if partitions have enough free diskspace: [  OK  ]
Retrigger failed udev events[  OK  ]
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  [  OK  ]
Waiting for network to be up[  OK  ]
Starting hard disk temperature monitor daemon[  OK  ]
Starting rpcbind: [  OK  ]
Mounting other filesystems:  [  OK  ]
Starting Avahi daemon: [  OK  ]
Starting HAL daemon: [  OK  ]
Starting mandi daemon: [  OK  ]
Starting display manager: [  OK  ]
Enabling MSEC security policy[  OK  ]
Setting and checking MSEC permissions[  OK  ]
Total time: 30 seconds

8 Ответ от StanN

  • StanN
  • Посетитель
  • Неактивен
  • Зарегистрирован: 17.07.2010
  • Сообщений: 9
  • Репутация : [ 0 | 0 ]

В начале инсталла можно попытыться инициализировать разные Х-драйвера,которые потом развернуться вместе с иксами.
Как вариант попробуйте-
F4-default
вписать в ком.строку    xdriver=free
или
F4-default
xdriver=nouveau

9 Ответ от Aleks

  • Aleks
  • Новичок
  • Неактивен
  • Зарегистрирован: 25.07.2010
  • Сообщений: 44
  • Репутация : [ 0 | 0 ]
StanN пишет:

В начале инсталла можно попытыться инициализировать разные Х-драйвера,которые потом развернуться вместе с иксами.
Как вариант попробуйте-
F4-default
вписать в ком.строку    xdriver=free
или
F4-default
xdriver=nouveau

Спасибо за совет, но не помогло. Правда, после ввода xdriver=nouveau загрузилась сразу консоль, (до этого приходилось переключаться Ctrl+Alt+F1), а вот из консоли в графику (Ctrl+Alt+F7) перейти снова не удалось...

10 Ответ от Pavel

  • Pavel
  • Pavel
  • Автоэлектрик
  • Неактивен
  • Откуда: Ростов-на-Дону
  • Зарегистрирован: 21.02.2010
  • Сообщений: 1,278
  • Репутация : [ 15 | 1 ]

с безопасного попробуй.В консоли
init5

11 Ответ от StanN

  • StanN
  • Посетитель
  • Неактивен
  • Зарегистрирован: 17.07.2010
  • Сообщений: 9
  • Репутация : [ 0 | 0 ]

Есть сомнение по поводу самого LiveCD.
Как правило пользуюсь инсталл-дисками которые сам скачивал и записывал с проверкой записи на самой малой скорости.
Последовательность действий такова с любого быстрого ФТП
-скачиваю  свежий образ (iso)
-скачиваю его проверочный файл MD5.
Скачав,Total Commander,FreeCommander-ом проверяю контрольную сумму.
Если error=0 идем далее ,записываем образ на самой маленькой скорости
с проверкой записи,если все ок
возвращаемся к проверки MD5 но проверяем  уже iso на  записанном диске.
Если все ок делаем пробную установку в VirtualBox например(Мандрива Оне устанавливается там за 15 мин. на весьма скромной машине)если все доходит до bootloader install можно не устанавливать далее.
Проверив iso CD можно приступать к установке на конкретное железо.
Советую
-скачать MD5 файл и проверить  свой диск на наличие ошибок
-если все ОК можно проверить установку в виртуальной машине
ну и если там все ок то тогда нужно проверить ваше железо
для чего под руками надо иметь GnomeMiniZen PCLinuxOS  CD или
Ubuntu Gnome 10.04 если они будут проходить установку без проблем
последнее что можно проверить,это взять другую видео-карту

12 Ответ от Aleks

  • Aleks
  • Новичок
  • Неактивен
  • Зарегистрирован: 25.07.2010
  • Сообщений: 44
  • Репутация : [ 0 | 0 ]

Спасибо за советы. Проблемы в следующем: во-первых, нет возможности проверить файл с помощью MD5, т. к. с оф. сайта уделен исходный файл для скачивания, в связи с выходом нового релиза; во-вторых, как я понял, для того, чтобы запстить гостевую систему на VirtualBox нужны свободные ресурсы, а у меня их нет - компьютер старый, 256 Мб памяти. Напрашивается вывод перестать терзать сомнениями себя и других, утилизировать старый комп, и приобрести машину посовременней.

13 Ответ от StanN

  • StanN
  • Посетитель
  • Неактивен
  • Зарегистрирован: 17.07.2010
  • Сообщений: 9
  • Репутация : [ 0 | 0 ]

Вообще-то комп  далеко не стар  (Cel 2,26) надо бы 512 Мб памяти подкинуть и тогда Мандрива Оне будет нормально работать(неприхотлива к ресурсам даже с Гноме) и еще надо бы проверить и хард ,такое впечатление что он в PIO-mode работает.Хорошо бы у друзей железо проверить.
По поводу релиза,вот ссылка на неплохой ФТП  http://ftp.nluug.nl/ftp/pub/os/Linux/distr/ 
там как правило все есть.
И еще чтобы не заморачиваться  с двойной установкой(на один винт) осей,лучше для экспериментов взять б/у хард на 20-40 Мб,но нормальный,и на нем уже отрабатывать установку осей,а винда будет цела и невредима,просто вместо одного харда подключать другой чисто физически.