Linux version 2.6.35.8 (root@bt) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Sun Nov 14 06:32:36 EST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000009b63f000 (usable)
BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved)
BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS)
BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data)
BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable)
BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000158000000 (usable)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x9b800 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-EFFFF write-through
F0000-FFFFF write-combining
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 0FFE00000 mask FFFE00000 write-protect
2 base 080000000 mask FE0000000 write-back
3 base 09C000000 mask FFC000000 uncachable
4 base 09B800000 mask FFF800000 uncachable
5 base 100000000 mask F80000000 write-back
6 base 158000000 mask FF8000000 uncachable
7 base 160000000 mask FE0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 37a9c000 - 37ff0000
Allocated new RAMDISK: 00a3e000 - 00f91d09
Move RAMDISK from 0000000037a9c000 - 0000000037fefd08 to 00a3e000 - 00f91d08
ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
ACPI: XSDT 9b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 9b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 9b7ea000 0EF55 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: FACS 9b75e000 00040
ACPI: ASF! 9b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: HPET 9b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC 9b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG 9b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC 9b7e9000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
ACPI: BOOT 9b7e6000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: ASPT 9b7e3000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: WDAT 9b7e2000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 9b7e1000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 9b7df000 01A46 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
1600MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0009b800
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009d
0: 0x00000100 -> 0x0009b63f
0: 0x0009b7ff -> 0x0009b800
On node 0 totalpages: 636380
free_area_init_node: node 0, pgdat c0944840, node_mem_map c1001020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3964 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 3201 pages used for memmap
HighMem zone: 405953 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [8000 - 87ff]
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at a0000000 (gap: a0000000:50000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c2400000 s29056 r0 d24192 u524288
pcpu-alloc: s29056 r0 d24192 u524288 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
early_res array is doubled to 128 at [8800 - 97ff]
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 631403
Kernel command line: root=UUID=30519965-9ab0-435f-bde1-2a616105a878 ro quiet splash
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (58 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0000100000 - 0000a395a4] TEXT DATA BSS
#3 [000009d000 - 0000100000] BIOS reserved
#4 [0000a3a000 - 0000a3d2cb] BRK
#5 [0000002000 - 0000003000] TRAMPOLINE
#6 [0000003000 - 0000007000] ACPI WAKEUP
#7 [0000007000 - 0000008000] PGTABLE
#8 [0000a3e000 - 0000f92000] NEW RAMDISK
#9 [0001000000 - 0001001000] BOOTMEM
#10 [0001001000 - 0002371000] BOOTMEM
#11 [0002371000 - 0002371004] BOOTMEM
#12 [0002371040 - 0002371100] BOOTMEM
#13 [0002371100 - 0002371154] BOOTMEM
#14 [0002371180 - 0002374180] BOOTMEM
#15 [0002374180 - 0002374218] BOOTMEM
#16 [0002374240 - 000237a240] BOOTMEM
#17 [000237a240 - 000237a265] BOOTMEM
#18 [000237a280 - 000237a2a7] BOOTMEM
#19 [000237a2c0 - 000237a4d4] BOOTMEM
#20 [000237a500 - 000237a540] BOOTMEM
#21 [000237a540 - 000237a580] BOOTMEM
#22 [000237a580 - 000237a5c0] BOOTMEM
#23 [000237a5c0 - 000237a600] BOOTMEM
#24 [000237a600 - 000237a640] BOOTMEM
#25 [000237a640 - 000237a680] BOOTMEM
#26 [000237a680 - 000237a6c0] BOOTMEM
#27 [000237a6c0 - 000237a700] BOOTMEM
#28 [000237a700 - 000237a740] BOOTMEM
#29 [000237a740 - 000237a780] BOOTMEM
#30 [000237a780 - 000237a7c0] BOOTMEM
#31 [000237a7c0 - 000237a800] BOOTMEM
#32 [000237a800 - 000237a840] BOOTMEM
#33 [000237a840 - 000237a880] BOOTMEM
#34 [000237a880 - 000237a8c0] BOOTMEM
#35 [000237a8c0 - 000237a900] BOOTMEM
#36 [000237a900 - 000237a940] BOOTMEM
#37 [000237a940 - 000237a980] BOOTMEM
#38 [000237a980 - 000237a990] BOOTMEM
#39 [000237a9c0 - 000237aa00] BOOTMEM
#40 [000237aa00 - 000237aa40] BOOTMEM
#41 [0002400000 - 000240d000] BOOTMEM
#42 [0002480000 - 000248d000] BOOTMEM
#43 [0002500000 - 000250d000] BOOTMEM
#44 [0002580000 - 000258d000] BOOTMEM
#45 [0002600000 - 000260d000] BOOTMEM
#46 [0002680000 - 000268d000] BOOTMEM
#47 [0002700000 - 000270d000] BOOTMEM
#48 [0002780000 - 000278d000] BOOTMEM
#49 [000237ca40 - 000237ca44] BOOTMEM
#50 [000237ca80 - 000237ca84] BOOTMEM
#51 [000237cac0 - 000237cae0] BOOTMEM
#52 [000237cb00 - 000237cb20] BOOTMEM
#53 [000237cb40 - 000237cbd8] BOOTMEM
#54 [000237cc00 - 000237cc38] BOOTMEM
#55 [000237cc40 - 0002380c40] BOOTMEM
#56 [000278d000 - 000280d000] BOOTMEM
#57 [0002380c40 - 00023c0c40] BOOTMEM
Initializing HighMem for node 0 (000377fe:0009b800)
Memory: 2509420k/2547712k available (6256k kernel code, 36100k reserved, 2233k data, 488k init, 1636616k highmem)
virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc094b000 - 0xc09c5000 ( 488 kB)
.data : 0xc071c138 - 0xc094a744 (2233 kB)
.text : 0xc0100000 - 0xc071c138 (6256 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.986 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.55 BogoMIPS (lpj=8423286)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20100428
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz stepping 05
Booting Node 0, Processors #1
Initializing CPU#1
#2
Initializing CPU#2
#3
Initializing CPU#3
Brought up 4 CPUs
Total of 4 processors activated (20225.90 BogoMIPS).
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 10731.600 MB/sec
xor: using function: pIII_sse (10731.600 MB/sec)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 9b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 9b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 9b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 9b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x5050-0x5057]
pci 0000:00:16.0: reg 10: [mem 0xc4504000-0xc450400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xc450a000-0xc450a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xc4500000-0xc4503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xc4509000-0xc45093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x5048-0x504f]
pci 0000:00:1f.2: reg 14: [io 0x505c-0x505f]
pci 0000:00:1f.2: reg 18: [io 0x5040-0x5047]
pci 0000:00:1f.2: reg 1c: [io 0x5058-0x505b]
pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
pci 0000:00:1f.2: reg 24: [mem 0xc4508000-0xc45087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xc4506000-0xc45060ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
pci 0000:00:1f.6: reg 10: [mem 0xc4507000-0xc4507fff 64bit]
pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xc4400000-0xc441ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x4000-0x40ff]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xc4420000-0xc4423fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xc3400000-0xc340ffff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:03:00.0: reg 18: [mem 0xc1404000-0xc1404fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xc1400000-0xc1403fff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI Warning for \_SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20100428/nspredef-456)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
pci_bus 0000:7f: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 1110 MB/s
raid6: int32x2 1200 MB/s
raid6: int32x4 877 MB/s
raid6: int32x8 812 MB/s
raid6: mmxx1 3696 MB/s
raid6: mmxx2 4393 MB/s
raid6: sse1x1 3318 MB/s
raid6: sse1x2 3918 MB/s
raid6: sse2x1 6532 MB/s
raid6: sse2x2 7683 MB/s
raid6: using algorithm sse2x2 (7683 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d000 - 000000000009ffff
reserve RAM buffer: 000000009b63f000 - 000000009bffffff
reserve RAM buffer: 000000009b800000 - 000000009bffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x0800-0x080f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: [io 0x0380-0x038e] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xc4600000-0xc4600fff] has been reserved
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5456k freed
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 1715
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /class/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /class/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
[Firmware Bug]: Invalid critical threshold (0)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (42 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ACPI: Battery Slot [BAT0] (battery present)
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[26400]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.02-k2
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.12
Copyright(c) 2004-2009 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
st: Version 20081215, fixed bufsize 32768, s/g segs 256
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 43
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.15
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.15
Fusion MPT FC Host driver 3.04.15
Fusion MPT SAS Host driver 3.04.15
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc450a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 21, io mem 0xc4509000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input3
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: ST9500420AS, 0006HPM1, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
ata2.00: ATAPI: hp DVDRAM GT30L, mP04, max UDMA/100
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata2.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA ST9500420AS 0006 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 3:0:0:0: CD-ROM hp DVDRAM GT30L mP04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sda1 sda2 sda3 < sda5 > sda4
sd 2:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 488k freed
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
fuse init (API version 7.14)
usb 2-1: new high speed USB device using ehci_hcd and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.1: new full speed USB device using ehci_hcd and address 3
input: A4TECH USB Device as /class/input/input4
generic-usb 0003:09DA:054F.0001: input,hiddev96: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1a.0-1.1/input0
input: A4TECH USB Device as /class/input/input5
generic-usb 0003:09DA:054F.0002: input: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1a.0-1.1/input1
usb 1-1.2: new high speed USB device using ehci_hcd and address 4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 44 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf80ee000, 60:eb:69:3d:3d:3c, XID 083000c0 IRQ 44
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
scsi8 : usb-storage 1-1.2:1.0
usb 2-1.3: new full speed USB device using ehci_hcd and address 3
usb 2-1.5: new high speed USB device using ehci_hcd and address 4
scsi 8:0:0:0: Direct-Access JetFlash TS4GJFV35 8.01 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 7987200 512-byte logical blocks: (4.08 GB/3.80 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI removable disk
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda5): mounted filesystem with writeback data mode
udevd version 124 started
Linux agpgart interface v0.103
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
ACPI: WMI: Mapper loaded
rt2860 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
rt2860 0000:02:00.0: setting latency timer to 64
=== pAd = f858f000, size = 476224 ===
<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xf8140000, csr_addr=0xf8140000!
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
cfg80211: Calling CRDA to update world regulatory domain
lis3lv02d: hardware type DV7 found.
lis3lv02d: 8 bits sensor found
input: ST LIS3LV02DL Accelerometer as /class/input/input6
Registered led device: hp::hddprotect
lis3lv02d driver loaded.
Error: Driver 'rt2860' is already registered, aborting...
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HP WMI hotkeys as /class/input/input7
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
usb 1-1.3: new full speed USB device using ehci_hcd and address 5
Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0x5a0400
input: SynPS/2 Synaptics TouchPad as /class/input/input8
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
lp: driver loaded but no devices found
EXT3-fs (sda5): using internal journal
ip_tables: (C) 2000-2006 Netfilter Core Team
mtrr: base(0xb0000000) is not aligned on a size(0x1ff0000) boundary
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
