Настоятельно просим вас при общении соблюдать Правила форума и законы РФ. Наша тематика вне политики, поэтому воздержитесь от обсуждения ситуации на Украине и связанных с ней событий, независимо от того, какую сторону вы поддерживаете.
Также напоминаем, что наш форум находится в доменной зоне .ru, физически расположен на российских серверах и мы соблюдаем действующее законодательство России. Любые сообщения о политике будут удаляться.
Linux Forum → Debian GNU/Linux → [Нерешаемо] Проблемы с AMD Radeon HD4650 в Debian Squeeze AMD64
KDE4 не оценил старый Xorg.
Кто-нибдуь может скинуть "стандартный" /etc/fstab?
Кто-нибдуь может скинуть "стандартный" /etc/fstab?
Насчёт "стандартного" не понял, но вот мой
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=bdf5c00a-1ff1-489d-8f2a-38285a447e97 / ext4 errors=remount-ro 0 1
# /my was on /dev/sda6 during installation
UUID=55484404-7337-485a-afaa-58c328f46b22 /my ext4 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=52efd41d-7787-4376-ac07-ed8dcc3baf56 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0durc
То, что надо :-). Спасибо.
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
/dev/sda5 / ext4 defaults 0 1
/dev/sda2 /home/user reiserfs defaults 0 0
# swap was on /dev/sda6 during installation
/dev/sda6 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0Lenny, установленный через debootstrap, не работает. Выдаёт кучу ошибок и вырубается.
Есть слухи, что вчера обновился DKMS. Думаю, что стоит дать fglrx есть один шанс =).
Снова всё оживил, кроме Kwin. Думаю, тему можно в корзину, а для Kwin создать отдельную тему. Как "Обход проверки драйвера в Kwin".
В Kwin иногда отваливается композитинг и его нужно врубать нажаиме Alt-Shift-F12.
Нет, ошибся. Тему закрывать нельзя. В 3D-приложениях такое творится... не могу описать, а скриншоты не делаются (интересно, почему KSnapshot не появляется в игре).
user@DebPC:~$ cat /var/log/Xorg.0.log | grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x104fec VRAM End: 0x10000000Writer
Не включается так.
Кстати, если раньше всё работало на открытых дровах, а потом ты поставил fglrx, не забудь модуль radeon включить в чёрный список в /etc/modprobe.d/blacklist.conf
Writer
После того, что было я не скоро вернусь к fglrx (у меня ).
Поставил драйвер radeon опять. Теперь в играх есть изображение, но мерцает какие-то чёрные прямоугольники.
user@DebPC:~$ cat /var/log/Xorg.0.log | grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x00df00d0 is: 0x00df00d0
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000Эффекты есть частично, но в меню Kwin упрямо говорит, что эффекты не поддерживаются
попробуй в xorg.conf в разделе драйвера добавить опции
Option "AccelMethod" "XAA"
Option "XAANoOffscreenPixmaps"
Writer
Мерцание не прекратилось, Kwin всё также думает. Однако, нижняя панель стала прозрачной 
.
user@DebPC:~$ cat /var/log/Xorg.0.log | grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x00df00d0 is: 0x00df00d0
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
(WW) RADEON(0): Option "XAANoOffscreenPixmaps" is not usedВключил эффекты Kwin: в ~/.kde/share/config/kwinrc выставил CheckIsSafe=true.
Теперь в играх есть изображение, но мерцает какие-то чёрные прямоугольники.
С radeon.modeset=0 загружаешься? Если композит выключить, моргание пропадает? Если да, то композит так работает c dri.
Выход kms+dri2, попробуй ядро 2.6.35 из experimental и грузись уже с modeset.
Rus
В строку ядра прописать radeon.modeset=0? Я уже получал Epic Fail с новым ядром :-D.
Darth Revan, radeon.modeset=1, можно и вообще ничего не прописывать по идее, оно автоматом должно
Прописывать надо radeon.modeset=0 если нужно отключить kms
Rus
Иксы не загрузились.
Осталась только одна проблема (что хорошо): при включённом композитном режимы идёт мерцание в нативных OpenGL-приложениях (в Wine всё работает). Собственно, это не сильно страшно, учитывая то, что вместо LinCity-NG я могу играть в SimCity 3000 (или SimCity 4), который явно лучше.
Update: SimCity 3000 не заработал =(. А SimCity 4 сложно достать.
Думал, что в fglrx 10.8 всё заработает. Результат тот же.
Особая магия: у моей подруги тоже ATI HD4600 Series. Полёт нормальный.
И так: поставил Kubuntu Lucid (через debootstrap, чтобы диск не марать) на два компьютера с AMD Radeon HD 4600 Series (один - сабж, другой - друга). Через Jockey поставил fglrx.
Результат: на видеокарте друга всё чудесно работает, а на сабже - нет. Теперь я точно уверен, что настроить fglrx для работы с сабжем нельзя.
Ну и конечно: если видеокарта - кю (как мягче?), то и поддержка такая же: http://forums.amd.com/game/messageview. … ight_key=y
Ну и напоследок /var/log/Xorg.0.log:
[ 24.935]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 24.935] X Protocol Version 11, Revision 0
[ 24.935] Build Operating System: Linux 2.6.24-28-xen x86_64 Ubuntu
[ 24.935] Current Operating System: Linux DebPC 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64
[ 24.936] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=dabb1f2e-21ad-4c3d-b1c9-2dfec18efb55 ro vga=795 splash quiet
[ 24.936] Build Date: 30 September 2010 07:35:54PM
[ 24.936] xorg-server 2:1.9.0+git20100930+server-1.9-branch.4d2542a1-0ubuntu0sarvatt2 (For technical support please see http://www.ubuntu.com/support)
[ 24.936] Current version of pixman: 0.19.5
[ 24.936] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.936] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.936] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 3 18:11:11 2010
[ 24.936] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.936] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.936] (==) No Layout section. Using the first Screen section.
[ 24.936] (**) |-->Screen "Default Screen" (0)
[ 24.936] (**) | |-->Monitor "<default monitor>"
[ 24.936] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 24.937] (**) | |-->Device "Default Device"
[ 24.937] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 24.937] (==) Automatically adding devices
[ 24.937] (==) Automatically enabling devices
[ 24.937] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 24.937] Entry deleted from font path.
[ 24.937] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 24.937] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 24.937] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.937] (II) Loader magic: 0x7d1580
[ 24.937] (II) Module ABI versions:
[ 24.937] X.Org ANSI C Emulation: 0.4
[ 24.937] X.Org Video Driver: 8.0
[ 24.937] X.Org XInput driver : 11.0
[ 24.937] X.Org Server Extension : 4.0
[ 24.937] (--) PCI:*(0:1:0:0) 1002:9498:1787:2009 rev 0, Mem @ 0xd0000000/268435456, 0xfbee0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
[ 24.947] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24.947] (II) "extmod" will be loaded by default.
[ 24.948] (II) "dbe" will be loaded by default.
[ 24.948] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 24.948] (II) "record" will be loaded by default.
[ 24.948] (II) "dri" will be loaded by default.
[ 24.948] (II) "dri2" will be loaded by default.
[ 24.948] (II) LoadModule: "glx"
[ 24.948] (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
[ 24.948] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 24.948] compiled for 7.6.0, module version = 1.0.0
[ 24.949] (II) Loading extension GLX
[ 24.949] (II) LoadModule: "extmod"
[ 24.957] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 24.957] (II) Module extmod: vendor="X.Org Foundation"
[ 24.957] compiled for 1.9.0, module version = 1.0.0
[ 24.957] Module class: X.Org Server Extension
[ 24.957] ABI class: X.Org Server Extension, version 4.0
[ 24.957] (II) Loading extension MIT-SCREEN-SAVER
[ 24.958] (II) Loading extension XFree86-VidModeExtension
[ 24.958] (II) Loading extension XFree86-DGA
[ 24.958] (II) Loading extension DPMS
[ 24.958] (II) Loading extension XVideo
[ 24.958] (II) Loading extension XVideo-MotionCompensation
[ 24.958] (II) Loading extension X-Resource
[ 24.958] (II) LoadModule: "dbe"
[ 24.958] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 24.958] (II) Module dbe: vendor="X.Org Foundation"
[ 24.958] compiled for 1.9.0, module version = 1.0.0
[ 24.958] Module class: X.Org Server Extension
[ 24.958] ABI class: X.Org Server Extension, version 4.0
[ 24.958] (II) Loading extension DOUBLE-BUFFER
[ 24.958] (II) LoadModule: "record"
[ 24.959] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.959] (II) Module record: vendor="X.Org Foundation"
[ 24.959] compiled for 1.9.0, module version = 1.13.0
[ 24.959] Module class: X.Org Server Extension
[ 24.959] ABI class: X.Org Server Extension, version 4.0
[ 24.959] (II) Loading extension RECORD
[ 24.959] (II) LoadModule: "dri"
[ 24.959] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 24.959] (II) Module dri: vendor="X.Org Foundation"
[ 24.962] compiled for 1.9.0, module version = 1.0.0
[ 24.962] ABI class: X.Org Server Extension, version 4.0
[ 24.962] (II) Loading extension XFree86-DRI
[ 24.962] (II) LoadModule: "dri2"
[ 24.962] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.962] (II) Module dri2: vendor="X.Org Foundation"
[ 24.962] compiled for 1.9.0, module version = 1.2.0
[ 24.962] ABI class: X.Org Server Extension, version 4.0
[ 24.962] (II) Loading extension DRI2
[ 24.962] (II) LoadModule: "fglrx"
[ 24.962] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 24.984] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 24.984] compiled for 1.4.99.906, module version = 8.78.30
[ 24.984] Module class: X.Org Video Driver
[ 24.985] (II) Loading sub module "fglrxdrm"
[ 24.985] (II) LoadModule: "fglrxdrm"
[ 24.985] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 24.985] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.985] compiled for 1.8.99.905, module version = 8.78.30
[ 24.985] (II) ATI Proprietary Linux Driver Version Identifier:8.78.30
[ 24.985] (II) ATI Proprietary Linux Driver Release Identifier: 8.78.3
[ 24.985] (II) ATI Proprietary Linux Driver Build Date: Sep 20 2010 21:31:08
[ 24.985] (++) using VT number 7
[ 25.006] (WW) Falling back to old probe method for fglrx
[ 25.012] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 25.012] (--) Assigning device section with no busID to primary device
[ 25.012] (--) Chipset Supported AMD Graphics Processor (0x9498) found
[ 25.012] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 25.013] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 25.013] (II) AMD Video driver is signed
[ 25.013] (II) fglrx(0): pEnt->device->identifier=0x240b480
[ 25.013] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 25.013] (II) Loading sub module "vgahw"
[ 25.013] (II) LoadModule: "vgahw"
[ 25.014] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 25.014] (II) Module vgahw: vendor="X.Org Foundation"
[ 25.014] compiled for 1.9.0, module version = 0.1.0
[ 25.014] ABI class: X.Org Video Driver, version 8.0
[ 25.014] (II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 25.014] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 25.014] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 25.014] (==) fglrx(0): Default visual is TrueColor
[ 25.014] (==) fglrx(0): RGB weight 888
[ 25.014] (II) fglrx(0): Using 8 bits per RGB
[ 25.014] (==) fglrx(0): Buffer Tiling is ON
[ 25.014] (II) Loading sub module "fglrxdrm"
[ 25.014] (II) LoadModule: "fglrxdrm"
[ 25.014] (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 25.016] ukiDynamicMajor: found major device number 251
[ 25.016] ukiDynamicMajor: found major device number 251
[ 25.016] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.016] ukiOpenDevice: node name is /dev/ati/card0
[ 25.016] ukiOpenDevice: open result is 12, (OK)
[ 25.016] ukiOpenByBusid: ukiOpenMinor returns 12
[ 25.016] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.017] (==) fglrx(0): NoAccel = NO
[ 25.017] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 25.017] (--) fglrx(0): Chipset: "ATI Radeon HD 4600 Series " (Chipset = 0x9498)
[ 25.017] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2009)
[ 25.017] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 25.017] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 25.017] (--) fglrx(0): MMIO registers at 0xfbee0000
[ 25.017] (--) fglrx(0): I/O port at 0x0000ee00
[ 25.017] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 25.018] (II) fglrx(0): AC Adapter is used
[ 25.025] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 25.025] (II) Loading sub module "vbe"
[ 25.025] (II) LoadModule: "vbe"
[ 25.026] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 25.026] (II) Module vbe: vendor="X.Org Foundation"
[ 25.026] compiled for 1.9.0, module version = 1.1.0
[ 25.026] ABI class: X.Org Video Driver, version 8.0
[ 25.026] (II) fglrx(0): VESA BIOS detected
[ 25.026] (II) fglrx(0): VESA VBE Version 3.0
[ 25.026] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 25.026] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 25.026] (II) fglrx(0): VESA VBE OEM Software Rev: 11.22
[ 25.026] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 25.026] (II) fglrx(0): VESA VBE OEM Product: BSK3G07-10R-01
[ 25.026] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 25.061] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 25.061] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR2
[ 25.061] (II) fglrx(0): PCIE card detected
[ 25.061] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 25.061] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 25.063] (II) fglrx(0): Using adapter: 1:0.0.
[ 25.087] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 25.093] (II) fglrx(0): Interrupt handler installed at IRQ 42.
[ 25.093] (II) fglrx(0): RandR 1.2 support is enabled!
[ 25.093] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 25.093] (==) fglrx(0): Center Mode is disabled
[ 25.093] (II) Loading sub module "fb"
[ 25.093] (II) LoadModule: "fb"
[ 25.093] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.094] (II) Module fb: vendor="X.Org Foundation"
[ 25.094] compiled for 1.9.0, module version = 1.0.0
[ 25.094] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.094] (==) fglrx(0): Active stereo disabled
[ 25.094] (II) Loading sub module "ddc"
[ 25.094] (II) LoadModule: "ddc"
[ 25.094] (II) Module "ddc" already built-in
[ 25.526] (II) fglrx(0): Finished Initialize PPLIB!
[ 25.529] (II) fglrx(0): Output DFP1 has no monitor section
[ 25.529] (II) fglrx(0): Output DFP2 has no monitor section
[ 25.529] (II) fglrx(0): Output CRT1 has no monitor section
[ 25.529] (II) fglrx(0): Output CRT2 has no monitor section
[ 25.529] (II) Loading sub module "ddc"
[ 25.529] (II) LoadModule: "ddc"
[ 25.529] (II) Module "ddc" already built-in
[ 25.529] (II) fglrx(0): Connected Display0: DFP1
[ 25.529] (II) fglrx(0): Display0 EDID data ---------------------------
[ 25.529] (II) fglrx(0): Manufacturer: ACR Model: ad73 Serial#: 1897929398
[ 25.529] (II) fglrx(0): Year: 2007 Week: 12
[ 25.529] (II) fglrx(0): EDID Version: 1.3
[ 25.529] (II) fglrx(0): Digital Display Input
[ 25.529] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 25.529] (II) fglrx(0): Gamma: 2.07
[ 25.529] (II) fglrx(0): DPMS capabilities: Off
[ 25.529] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.529] (II) fglrx(0): First detailed timing is preferred mode
[ 25.529] (II) fglrx(0): redX: 0.634 redY: 0.354 greenX: 0.286 greenY: 0.620
[ 25.529] (II) fglrx(0): blueX: 0.138 blueY: 0.076 whiteX: 0.312 whiteY: 0.328
[ 25.529] (II) fglrx(0): Supported established timings:
[ 25.529] (II) fglrx(0): 720x400@70Hz
[ 25.529] (II) fglrx(0): 640x480@60Hz
[ 25.529] (II) fglrx(0): 640x480@67Hz
[ 25.529] (II) fglrx(0): 640x480@72Hz
[ 25.529] (II) fglrx(0): 640x480@75Hz
[ 25.529] (II) fglrx(0): 800x600@56Hz
[ 25.529] (II) fglrx(0): 800x600@60Hz
[ 25.529] (II) fglrx(0): 800x600@72Hz
[ 25.529] (II) fglrx(0): 800x600@75Hz
[ 25.529] (II) fglrx(0): 832x624@75Hz
[ 25.529] (II) fglrx(0): 1024x768@60Hz
[ 25.529] (II) fglrx(0): 1024x768@70Hz
[ 25.529] (II) fglrx(0): 1024x768@75Hz
[ 25.529] (II) fglrx(0): 1280x1024@75Hz
[ 25.529] (II) fglrx(0): Manufacturer's mask: 0
[ 25.529] (II) fglrx(0): Supported standard timings:
[ 25.529] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 25.529] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 25.529] (II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 25.529] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 25.529] (II) fglrx(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 25.529] (II) fglrx(0): #5: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[ 25.529] (II) fglrx(0): #6: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 25.529] (II) fglrx(0): #7: hsize: 800 vsize 600 refresh: 60 vid: 16453
[ 25.529] (II) fglrx(0): Supported detailed timing:
[ 25.529] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 25.529] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 25.529] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 25.529] (II) fglrx(0): Serial No: L73083094247
[ 25.529] (II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 25.529] (II) fglrx(0): Monitor name: Acer AL1917
[ 25.529] (II) fglrx(0): EDID (in hex):
[ 25.529] (II) fglrx(0): 00ffffffffffff00047273adb61a2071
[ 25.529] (II) fglrx(0): 0c11010380261e6b2a6760a25a499e23
[ 25.529] (II) fglrx(0): 135054bfef00818f8180714f7140614f
[ 25.529] (II) fglrx(0): 6140454f4540302a009851002a403070
[ 25.529] (II) fglrx(0): 1300782d1100001e000000ff004c3733
[ 25.529] (II) fglrx(0): 3038333039343234370a000000fd0037
[ 25.529] (II) fglrx(0): 4b1e530e000a202020202020000000fc
[ 25.529] (II) fglrx(0): 004163657220414c313931370a2000c7
[ 25.529] (II) fglrx(0): End of Display0 EDID data --------------------
[ 25.637] (II) fglrx(0): EDID vendor "ACR", prod id 44403
[ 25.637] (II) fglrx(0): Using EDID range info for horizontal sync
[ 25.637] (II) fglrx(0): Using EDID range info for vertical refresh
[ 25.637] (II) fglrx(0): Printing DDC gathered Modelines:
[ 25.637] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 25.637] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 25.637] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 25.637] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 25.637] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 25.637] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 25.637] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 25.637] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 25.637] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 25.637] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 25.637] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 25.637] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 25.637] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 25.637] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 25.637] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 25.638] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 25.638] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 25.638] (II) fglrx(0): Output DFP1 connected
[ 25.638] (II) fglrx(0): Output DFP2 disconnected
[ 25.638] (II) fglrx(0): Output CRT1 disconnected
[ 25.638] (II) fglrx(0): Output CRT2 disconnected
[ 25.638] (II) fglrx(0): Using exact sizes for initial modes
[ 25.638] (II) fglrx(0): Output DFP1 using initial mode 1280x1024
[ 25.638] (II) fglrx(0): Display dimensions: (380, 300) mm
[ 25.638] (II) fglrx(0): DPI set to (86, 86)
[ 25.638] (II) fglrx(0): Adapter ATI Radeon HD 4600 Series has 2 configurable heads and 1 displays connected.
[ 25.638] (==) fglrx(0): PseudoColor visuals disabled
[ 25.638] (II) Loading sub module "ramdac"
[ 25.638] (II) LoadModule: "ramdac"
[ 25.638] (II) Module "ramdac" already built-in
[ 25.638] (==) fglrx(0): NoDRI = NO
[ 25.638] (==) fglrx(0): Capabilities: 0x00000000
[ 25.638] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 25.638] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 25.638] (==) fglrx(0): UseFastTLS=0
[ 25.638] (==) fglrx(0): BlockSignalsOnLock=1
[ 25.638] (--) Depth 24 pixmap format is 32 bpp
[ 25.638] (II) Loading extension ATIFGLRXDRI
[ 25.638] (II) fglrx(0): doing swlDriScreenInit
[ 25.638] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 25.638] ukiDynamicMajor: found major device number 251
[ 25.638] ukiDynamicMajor: found major device number 251
[ 25.638] ukiDynamicMajor: found major device number 251
[ 25.638] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.638] ukiOpenDevice: node name is /dev/ati/card0
[ 25.639] ukiOpenDevice: open result is 17, (OK)
[ 25.639] ukiOpenByBusid: ukiOpenMinor returns 17
[ 25.639] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.639] (II) fglrx(0): [uki] DRM interface version 1.0
[ 25.639] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 25.639] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 25.639] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fd3e77ea000
[ 25.639] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 25.639] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 25.639] (II) fglrx(0): swlDriScreenInit done
[ 25.639] (II) fglrx(0): Kernel Module Version Information:
[ 25.639] (II) fglrx(0): Name: fglrx
[ 25.639] (II) fglrx(0): Version: 8.78.30
[ 25.639] (II) fglrx(0): Date: Sep 20 2010
[ 25.639] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 25.639] (II) fglrx(0): Kernel Module version matches driver.
[ 25.639] (II) fglrx(0): Kernel Module Build Time Information:
[ 25.639] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.35-22-generic
[ 25.639] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 25.639] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 25.639] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 25.639] (II) fglrx(0): [uki] register handle = 0x00004000
[ 25.657] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[ 25.657] (II) fglrx(0): DRI initialization successfull
[ 25.657] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
[ 25.658] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
[ 25.658] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
[ 25.658] (II) fglrx(0): Largest offscreen area available: 1664 x 960
[ 25.658] (==) fglrx(0): Backing store disabled
[ 25.658] (II) Loading extension FGLRXEXTENSION
[ 25.658] (==) fglrx(0): DPMS enabled
[ 25.658] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 25.658] (**) fglrx(0): Textured Video is enabled.
[ 25.658] (II) LoadModule: "glesx"
[ 25.658] (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
[ 25.659] (II) Module glesx: vendor="X.Org Foundation"
[ 25.659] compiled for 1.8.99.905, module version = 1.0.0
[ 25.659] (II) Loading extension GLESX
[ 25.659] (II) fglrx(0): GLESX enableFlags = 528
[ 25.659] (II) fglrx(0): GLESX is enabled
[ 25.659] (II) fglrx(0): Acceleration enabled
[ 25.659] (II) LoadModule: "amdxmm"
[ 25.660] (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
[ 25.660] (II) Module amdxmm: vendor="X.Org Foundation"
[ 25.660] compiled for 1.8.99.905, module version = 1.0.0
[ 25.660] (II) Loading extension AMDXVOPL
[ 25.661] (II) fglrx(0): UVD2 feature is available
[ 25.663] (II) fglrx(0): Enable composite support successfully
[ 25.663] (II) fglrx(0): X context handle = 0x1
[ 25.663] (II) fglrx(0): [DRI] installation complete
[ 25.663] (==) fglrx(0): Silken mouse enabled
[ 25.663] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 25.663] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 25.721] (--) RandR disabled
[ 25.721] (II) Initializing built-in extension Generic Event Extension
[ 25.721] (II) Initializing built-in extension SHAPE
[ 25.721] (II) Initializing built-in extension MIT-SHM
[ 25.721] (II) Initializing built-in extension XInputExtension
[ 25.721] (II) Initializing built-in extension XTEST
[ 25.721] (II) Initializing built-in extension BIG-REQUESTS
[ 25.721] (II) Initializing built-in extension SYNC
[ 25.721] (II) Initializing built-in extension XKEYBOARD
[ 25.721] (II) Initializing built-in extension XC-MISC
[ 25.721] (II) Initializing built-in extension SECURITY
[ 25.721] (II) Initializing built-in extension XINERAMA
[ 25.721] (II) Initializing built-in extension XFIXES
[ 25.721] (II) Initializing built-in extension RENDER
[ 25.721] (II) Initializing built-in extension RANDR
[ 25.721] (II) Initializing built-in extension COMPOSITE
[ 25.721] (II) Initializing built-in extension DAMAGE
[ 25.721] (II) Initializing built-in extension GESTURE
[ 25.742] ukiDynamicMajor: found major device number 251
[ 25.742] ukiDynamicMajor: found major device number 251
[ 25.742] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.742] ukiOpenDevice: node name is /dev/ati/card0
[ 25.742] ukiOpenDevice: open result is 18, (OK)
[ 25.742] ukiOpenByBusid: ukiOpenMinor returns 18
[ 25.742] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.824] (II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
[ 25.824] (II) GLX: Initialized DRI GL provider for screen 0
[ 25.824] (II) fglrx(0): Enable the clock gating!
[ 25.824] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 25.846] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 25.855] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 25.855] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.855] (II) LoadModule: "evdev"
[ 25.855] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.856] (II) Module evdev: vendor="X.Org Foundation"
[ 25.856] compiled for 1.9.0, module version = 2.5.0
[ 25.856] Module class: X.Org XInput Driver
[ 25.856] ABI class: X.Org XInput driver, version 11.0
[ 25.856] (**) Power Button: always reports core events
[ 25.856] (**) Power Button: Device: "/dev/input/event1"
[ 25.856] (--) Power Button: Found keys
[ 25.856] (II) Power Button: Configuring as keyboard
[ 25.856] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 25.856] (**) Option "xkb_rules" "evdev"
[ 25.856] (**) Option "xkb_model" "pc105"
[ 25.856] (**) Option "xkb_layout" "us"
[ 25.857] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 25.857] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.857] (**) Power Button: always reports core events
[ 25.857] (**) Power Button: Device: "/dev/input/event0"
[ 25.857] (--) Power Button: Found keys
[ 25.857] (II) Power Button: Configuring as keyboard
[ 25.857] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 25.857] (**) Option "xkb_rules" "evdev"
[ 25.857] (**) Option "xkb_model" "pc105"
[ 25.857] (**) Option "xkb_layout" "us"
[ 25.863] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 25.863] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.864] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.864] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 25.864] (--) AT Translated Set 2 keyboard: Found keys
[ 25.864] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.864] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 25.864] (**) Option "xkb_rules" "evdev"
[ 25.864] (**) Option "xkb_model" "pc105"
[ 25.864] (**) Option "xkb_layout" "us"
[ 25.864] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event3)
[ 25.864] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 25.864] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 25.864] (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event3"
[ 25.864] (--) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 25.864] (--) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 25.864] (--) ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 25.864] (--) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 25.864] (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 25.864] (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 25.864] (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.864] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
[ 25.864] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 25.864] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 25.864] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 25.864] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 25.864] (II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 25.865] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 25.865] (II) No input driver/identifier specified (ignoring)
[ 25.886] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 56.579] (II) Power Button: Close
[ 56.579] (II) UnloadModule: "evdev"
[ 56.579] (II) Power Button: Close
[ 56.579] (II) UnloadModule: "evdev"
[ 56.579] (II) AT Translated Set 2 keyboard: Close
[ 56.579] (II) UnloadModule: "evdev"
[ 56.579] (II) ImPS/2 Logitech Wheel Mouse: Close
[ 56.579] (II) UnloadModule: "evdev"
[ 56.582] (II) fglrx(0): Shutdown CMMQS
[ 56.582] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 56.582] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fd3e77ea000
[ 56.613] (II) fglrx(0): Interrupt handler Shutdown.
[ 56.872] ddxSigGiveUp: Closing logP.S. А вот и сабж: http://www.hisdigital.com/ru/product2-469.shtml
После установки squeeze, не запускаются иксы.
Лог Xorg'а:
(WW) RADEON(0): LVDS Info:
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x7fff7000 is: 0x7fff7000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00000000
Xorg.conf:
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbVariant" ","
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSectionSection "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSectionSection "Device"
Identifier "Device0"
Driver "radeon"
EndSectionSection "Monitor"
Identifier "Configured Monitor"
# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
Modeline "1280x800_60.00" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync
EndSectionSection "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Device0"
DefaultDepth 24
EndSection
Карточка ATI Radeon Express x1250
Есть ли какие нибудь решения этой проблемы?
Linux Forum → Debian GNU/Linux → [Нерешаемо] Проблемы с AMD Radeon HD4650 в Debian Squeeze AMD64
Форум работает на PunBB, при поддержке Informer Technologies, Inc
